605984
15
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
GB
- 15 -
5. Before starting the equipment
Observe point 1 - Safety information.
Controls (buttons) (Fig. 2)
10 Desired Temperature + / Time Preselection +
11 Function Selection
12 On/Standby
13 Desired Temperature - / Time Preselection -
14 Time Preselection
Inserting batteries (Fig. 3-4):
1. Open the battery compartment cover by
pressing the lock (A) towards the middle and
pulling the battery compartment out at the
same time.
2. Insert the battery (B) in the battery compart-
ment with the positive pole facing down.
3. Press the battery compartment cover into the
remote control.
As the end user you are legally required to return
spent batteries. You can hand them in at public
collection points provided by your council or sales
outlets where batteries of this type are sold.
6. Operation
Warning! Before using the equipment for the rst
time, check that the voltage supply is the same as
the voltage details set out on the rating plate.
Read the safety regulations in section 1.
When the equipment is used for the first time
or after a long period of rest, it may emit an
odor for a short time. This is not a fault.
All modes and functions can be set using the but-
tons on the appliance as well as with the remote
control. The remote control requires a CR 2032
button cell (included in delivery).
6.1 Switching on the appliance
The ON/OFF main switch (Fig. 1 / Item 4) is used
to disconnect the equipment completely from the
mains supply.
The rst step when you want to use the appliance
is to turn on the main switch; the last step when
you no longer need the appliance is to turn o the
main switch. After the main switch is switched on,
the equipment will be in standby mode.
The heater shows the current equipment tem-
perature. The time display (00:00) for the timer
ashes.
6.2 Heating mode (Fig. 2)
With the On / Standby button (Item 12) you can
switch the equipment on or to standby mode.
Press the On / Standby button (12) to switch on
the equipment. The desired temperature (default
setting 38°C) ashes. The current equipment tem-
perature is then shown in the display, along with
the „Low heat output“ and „Blower“ symbols.
The time display (00:00) ashes brie y and then
shows the operating time which has elapsed.
The heater operates with low heat output and the
blower.
Press the „Mode“ button (11) and by so doing
select the heating function in the following se-
quence.
Low heat output -> High heat output and blower
-> Frost protection function -> Low heat output
and blower -> Low heat output, etc.
6.3 Setting the desired temperature.
A desired temperature can be set between
5°C – 38°C, which is the temperature range of the
integrated temperature sensor (equipment tem-
perature). Press the „+“ or „-“ button to increase or
reduce the desired temperature.
For the equipment to heat, the desired tempera-
ture must be set higher than the indicated equip-
ment temperature. If the desired temperature is
exceeded by 2°C, the equipment will switch o
again.
In the frost protection function the temperature
is set to a default setting of 7°C and cannot be
adjusted.
6.4 Timer (Fig. 2)
Once you have rst set the desired heating mode
and the desired temperature, you can program
a time for switching on („ON“) or a time for swit-
ching o („OFF“). You can select from between
1min to 23h 59min. It is also possible to combine
the switch-on time with the switch-o time.
Press the „Clock“ button (14) and select the timer
function in the following sequence.
Switch-on time hour -> Switch-on time minute ->
Switch-o time hour -> Switch-o time minute ->
Continuous operation
Anl_WW_2000_R_SPK7.indb 15Anl_WW_2000_R_SPK7.indb 15 13.03.15 09:3413.03.15 09:34
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Einhell WW 2000 R bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Einhell WW 2000 R in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 1,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info