606823
21
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
GB
- 21 -
5.2 Changing the saw blade
(Figs. 3-4/Item 12)
Important.
You can fit or replace saw blades without
using any other tools.
Pull out the mains plug before you fit or repla-
ce a saw blade.
Set the selector switch for pendulum action
(8) to position D (see Fig. 10).
The teeth of the saw blade are very sharp!
Remove the safety guard (15).
Press the blade holder (14) and insert the
saw blade (12) into the blade holder (14) as
far as the stop (Fig. 3). The teeth on the saw
blade must be pointing forwards.
Allow the blade holder (14) to slide back to
starting position. The saw blade (12) must sit
in the guide roller (10) (Fig.4).
Check that the saw blade (12) is securely
mounted in the blade holder.
To remove the saw blade, follow the instruc-
tions above in reverse order.
5.3 Installing the parallel stop (Fig. 5/Item 11)
The parallel stop (11) enables you to saw
parallel cuts.
Undo the two locking screws (13) on the so-
leplate (7).
Now slide the parallel stop into the guides on
the soleplate (7). You can fit the parallel stop
(11) on either the left or right of the equip-
ment.
The guide strip must always face downwards.
Set the required distance using the measu-
rement scale on the parallel stop (11) and
tighten the locking screws (13) again.
5.4 Setting the soleplate for miter cuts (Fig. 6)
Undo the locking lever (16) on the soleplate.
Pull the sole plate (7) backwards slightly. The
soleplate can now be swiveled a maximum
45° to the left and right.
If the soleplate (7) is pushed back to the
front again it will only function in the locking
positions at 0°, 15°, 30° and 45°, which are
marked on the graduated scale for the sole-
plate (9). Move the soleplate into the required
position and refasten the locking lever (16).
However, the soleplate (7) is also easily set
to another angle. To do so, slide the soleplate
(7) backwards, set the desired angle and re-
fasten the locking lever (16).
Important. For miter cuts you must remove the
locking screws for the parallel stop (13) and the
splinter guard (17).
5.5 Adapter for dust extraction system
(Fig. /Item 5)
Connect your jigsaw to a vacuum cleaner
using the adaptor for dust extraction (5). This
will provide excellent dust extraction on the
work piece. The benefits are that you will pro-
tect both the equipment and your own health.
Your work area will also be cleaner and safer.
Dust created when working may be dange-
rous. Refer to the section entitled “Safety
instructions”.
Fit the adapter (5) as shown in Fig. 7. The
adapter (5) must audibly engage to ensure
that it is secure in the soleplate (7). The adap-
ter for chip extraction (5) cannot be used for
miter cuts.
Fit the vacuum tube of the vacuum cleaner
onto the adaptor opening (5). Check that the
connections are air-tight.
5.6 Splinter guard (Fig. 15/Item 17)
The splinter guard (17) ensures that the material
you want to cut does not splinter or crack during
sawing. To use the splinter guard (17), proceed
as follows:
1. Bend the two lugs (a) on the soleplate guard
(b) slightly outwards and raise the soleplate
guard.
2. Remove the soleplate guard (b) from the so-
leplate (7) as shown in Fig. 15.
3. Insert the splinter guard (17) into the sole-
plate guard (b). As you do so, make sure that
the arrows on the splinter guard and on the
soleplate guard coincide as shown in Fig. 15.
The soleplate guard (b) can now be placed on the
soleplate (7) again. Proceed in reverse order.
Important. The splinter guard (17) can be
used only for 0° cuts and must be removed
for miter cuts up to 45°!
Anl_TH_JS_85_SPK1.indb 21Anl_TH_JS_85_SPK1.indb 21 24.10.12 10:2324.10.12 10:23
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Einhell TH-JS 85 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Einhell TH-JS 85 in de taal/talen: Engels, Zweeds als bijlage per email.

De handleiding is 2,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Einhell TH-JS 85

Einhell TH-JS 85 Gebruiksaanwijzing - Nederlands, Deutsch, Français, Italiano, Português, Espanõl - 72 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info