724140
22
Verklein
Vergroot
Pagina terug
1/88
Pagina verder
GB
- 22 -
5. Operation
5.1 Description of the control elements (Fig.
7)
1. “MODE” switch – function
2. Unassigned
3. “TIMER” LED – timer on
4. “TIMER” switch
5. “UP” selector switch – higher
6. “ON/OFF” switch – On/Off
7. “DOWN” selector switch – lower
8. „Sleep“ switch - sleep function
9. „Sleep function set“ LED
10. “SPEED” switch – fan speed
11. „Fan fast“ LED
12. Remote control sensor
13. „Fan slow“ LED
14. “COMP” LED – compressor running
15. LED – indicator panel
16. “F.W.” LED – condensate tray full
17. „Fan function set“ LED
18. „Automatic mode set“ LED
19. „Cool mode set“ LED
5.2 Switching the device on and off
Press the On/Off switch. The device starts up
automatically. If the ambient temperature:
is higher than 23°C the device will run in coo-
ling mode;
if it is between 20°C and 23°C the device will
run in fan mode.
The status of the device, or mode in which it is
running, will be shown by the corresponding
LEDs (see indicator panel).
Note: The LED indicator panel shows the current
room temperature (0-50°C).
To switch the device off, press the On/Off switch
again.
Important.
After you have switched off the unit, you must
wait at least three minutes before you switch
it on again. This protects the compressor from
overloads and considerably extends its service
life.
The cooling system switches itself off whenever
the room temperature is below the value set on
the thermostat. The air circulation/ventilation fan
continues to run as set. If the room temperature
increases again, the cooling system switches on
again.
5.3 Selecting the mode
Press the “Mode” selector (MODE) in the
sequence “Automatic”, “Cool”, “Fan”. The LED for
the selected mode lights up (see indicator panel).
5.4 Setting the set-point temperature
Press the “Warmer” selector (UP) or “Cooler”
(DOWN) to set your desired set-point
temperature. If you press the “Warmer” or
“Cooler” selector, the LED indicator panel
will show your desired set-point temperature.
Otherwise the LED indicator panel always shows
the current room temperature.
5.5 Selecting the fan speed
Press the “Fan speed” selector to set the desired
fan speed.
The LED for the mode lights up (see indicator
panel).
If the device is in “Automatic mode” (AUTO) the
fan speed will be selected automatically by the
device in dependency on the room temperature.
The corresponding LED lights up. The “Fan
speed” is deactivated.
5.6 Setting the timer
Press the switch for the “Timer” (TIMER) to
set the desired operating time (1 - 12 h). The
“Timer” (TIMER) LED lights up. If the timer is
set, the device starts automatically. If you press
the “Timer” switch, the time you have set will be
shown in the LED indicator panel. If the timer
has not been switched on, the device will run
continuously.
If the unit is connected to the voltage supply and
you press the TIMER switch, you can set the time
at which you wish the unit to be switched on. If,
for example, the timer shows “2”, this means that
the device will start up automatically in 2 hours
time.
5.7 Activating the sleep function (only
possible in cooling mode)
Press the “Sleep” key to activate the sleep
function. In order to prevent undercooling, the
set room temperature increases 1 °C during the
first hour and 2 °C within 2 hours. When the sleep
function is switched off the room temperature
decreases back to the set value. After the sleep
function has been on for 12 hours the equipment
switches off automatically.
Anleitung_MK_2100_E_SPK7.indb 22Anleitung_MK_2100_E_SPK7.indb 22 25.09.2018 10:12:4125.09.2018 10:12:41
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Einhell MK 2300E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Einhell MK 2300E in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 1,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info