G
Read-out Causes Heater does not ignite Remedies
Error display
All read-outs are turned off
Development of smell
Yellow colour with residue
Only the fan runs
The motor does not run
The mains plug is not inserted Insert mains plug correctly
000 Power failure Switch on 3 Hour operation or permane
operation
E03 Poor ignition Clean the tank and remove water and d
Remove dirt from the fan grille.
E04 Combustion without fresh air You must ventilate! Remove dirt.
in-flow from the air filter grille.
E05 Overheating control device has Insert the mains plug again and restart t
been triggered. check. If necessary, call your customer
service department.
E06 Automatic cut-out has been triggered. Press the OFF button and restart.
E07 Flashing FUEL light. Fill the tank. Remove dirt from the oil filt
E08 ”E08” or ”E12” lights up in the display. Press the OFF button and restart.
E09 ”E09” read-out. Press the OFF button and restart.
E14 High temperature level in room. Only switch the heater on again when th
temperature has fallen to under 30°.
E16 Hot air outlet is blocked. The overheating control device has bee
triggered. Remove the obstacle and
restart.
9. Error displays and remedies
If the same problems continue to occur, consult your customer service department.
