6
GB
1. Intended use
Lawn and garden roller for rolling surfaces and freshly
sown seed (for example grass seed but also seed in
beds) to ensure that the seed is perfectly inserted in
the soil.
The roller can also be used after the lawn area has
been scarified or fertilized.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
2. Technical data
Approx. roller width 57 cm
Approx. roller diameter 32 cm
Approx. volume 46 liters
Approx. total height with push bar 106 cm
Approx. max. weight filled with water 57 kg
Approx. weight unfilled 11 kg
3. Layout (Fig. 1)
1 Roller
2 Dirt wiper
3 Bottom shaft
4 Push bar
4. Assembly material (Fig. 2)
5 Thread cover (2x)
6 Cap nut M8 (2x)
7 Nut M 8 self-locking (2x)
8 Sealing cap (1x)
9 Nut M5 self-locking (2x)
10 Washer (2x)
11 Philips screw M5 (2x)
5. Assembly (Fig. 3 – 10)
You will need 8 mm. 13 mm and 14 mm open-ended
wrenches and a size 2 Philips screwdriver for the
assembly work.
Follow Figures 3 – 10 for the assembly.
Once assembled, fill the roller with water or sand. Its
capacity is approx. 46 liters.
6. Operation
Pull the roller over the ground you wish to roll in even
strips. Adjust the dirt wiper (2) so that as little soil as
possible remains on the roller. Only roll dry ground.
7. Ordering replacement parts
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
8. Disposal and recycling
The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
