Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
8
SC MS 600 – 080320
Assembly page 8/28
The appliance is designed for the preparation of small quantities of food, which have to
be consumed rather quickly. It is not designed for the preparation of large quantities at
once.
Never touch the blade when the appliance is in use. Furthermore, never try to stop the
movement of the blade in any way whatsoever.
(*)
Competent qualified electrician: after sales department of the producer or importer or any
person who is qualified, approved and competent to perform this kind of repairs in order to
avoid all danger. In any case you should return the appliance to this electrician.
IMPORTANT INFORMATION
This appliance is not for professional use. You should follow the requested breaks. Failure to
follow this instruction carefully may result in damage to the motor. Please refer to the rating
label for the maximum continuous usage time (KB xx min where xx is the maximum usage time).
The breaks should last at least 10 minutes.
HOW TO USE
Your new stick mixer is a convenient and easy to use for powerful high speed blending. It is
great for shakes, soups, sauces, omelettes and much, much more.
• Before using for the first time, the appliance should be cleaned with a damp cloth.
Ensure the unit is unplugged first!
• Screw the shaft onto the screw thread at the bottom of the motor unit. Take care to
screw the shaft in the direction shown by the locked symbol
. Using gentle hand
pressure only ensures that the shaft is fully tightened on to the motor unit.
• Put the ingredients into a suitable container such as a mixing bowl, cooking pan or
mixing beaker (if included). Do not overfill to avoid splashing when the motor is
switched on.
• Plug in at the mains.
• Put the shaft of the appliance into the ingredients before pressing the on switch. This
will avoid splashing when the motor is switched on.
• Switch on the appliance and blend but remember to use it for no longer than 1
minute of continuous use. The appliance must then have a break of 10 minutes.
HOW TO CLEAN THE DETACHABLE LEG
• Always unplug the unit before cleaning.
• The motor unit should only be wiped down with a moist cloth.
• Unscrew the shaft from the screw thread at the bottom of the motor unit. Take care to
screw the shaft in the direction shown by the unlocked symbol
.
• Wash the shaft under running water immediately after use. If it is very dirty, it can be
cleaned in warm washing-up water.
•
DO NOT put the metal detachable shaft in a dishwasher
. The chemicals used in
dishwashers and the salts will mark and stain the surface of the aluminium leg.
• For best results after cleaning and drying, lightly coat the metal surfaces with cooking oil.
This will keep the finish bright and stain free.
• Dry the detachable shaft thoroughly after washing.
• NEVER IMMERSE THE MOTOR UNIT IN ANY LIQUID.
