Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
9 MALINA E 2 - 110302
Back cover page (last page)
Assembly page 9/24
ASSEMBLING THE APPLIANCE AND PUTTING IT INTO OPERATION
• Place juice dish (2) in fixed position on the motor unit (1).
• Place the sealing ring (4) with the edge facing down on the driving shaft (3).
• Fix the juice extractor (5) on the driving shaft.
• Fix the grating disk (6) with teeth to the top on the driving shaft (3).
• Fix the juice extractor (5) and the grating disk (6) with the plastic nut (7) (when fixing or
loosening please hold the juice extractor in your hand).
• Place the filter strip (8) in the juice extractor, the one with fine pores is for juice, the one
with rough pores is for potatoes.
• Place the cover (9) (note position fixing!).
• Position clamp clip (10) on the cover in the notch provided for the purpose.
• Position receptacle for juice under the outlet spout (11).
• Switch appliance on.
• Feed in fruit and vegetables through the feeder tube (12) of the cover. At the same time
insert the stopper (13). Never put your fingers in the feeder tube of the cover when the
appliance is operating. You might get injured! Fruit and vegetables must be prepared in
such a way that they can easily be pushed through the feeder tube of the casing cover.
• After extracting or after having reached the maximum capacity of the juice extractor,
unplug the appliance and wait until the motor stops.
• Move the clamp clip (10), open the lid and remove the residues from the juice extractor
(5). Do not overfill the appliance (this appears in the juice callosity).
• The supplied butterfly nut (14) is for the easier loosing the plastic nut (7).
The quality of the fruit and vegetables is decisive for the quality of the juice.
Ensure that you always purchase fresh vegetables and fruit. Wash the fruit or vegetables
thoroughly before juice extraction - because of pesticides possibly used.
Always bear in mind that certain types of soft fruit which tend to form 'slush' are not suitable for
juice extraction, e.g. soft pears, bananas, boiled apples. For juice extraction generally do not
use any stone-fruit.
The weight of the products to be fed in can, depending on the quality and the juiciness,
amount to about 800 g.
Remark
: smaller quantities ensure a better result during the juice extraction and dryer peeled
potatoes.
CLEANING
• After use, unplug the appliance and wait until the motor stops, i.e. until the extractor has
come to standstill. Release the clamp clip, remove the cover, remove the residues and
then unscrew the plastic nut.
• Wash the removable parts with water. Do not put these parts in the dishwasher.
• When necessary wipe the motor unit with a damp cloth. Never immerse it in water or any
other liquid.
• Never use abrasive products.
GENERAL NOTES
The main rule is that the juice always be enjoyed in the fresh state. The fresher the vegetables
or fruit and the shorter the storage time of the juice, the better the effect.
