‘SSID’ field in ‘Site Survey’ function), you
have to input correct SSID of the access
point you wish to connect. Please contact
the owner of access point to ask for correct
SSID.
3. You have to input correct passphrase /
security key to connect an access point with
encryption. Please contact the owner of
access point to ask for correct passphrase /
security key.
4. The access point you wish to connect only
allows network cards with specific MAC
address to establish connection. Please go
to ‘About’ tab and write the value of
‘Phy_Addess’ down, then present this value
to the owner of access point so he / she can
add the MAC address of your network card
to his / her access point’s list.
1. Move closer to the place where access point
is located.
2. Enable ‘Wireless Protection’ in ‘Advanced’
tab.
3. Try a lower TX Rate in ‘Advanced’ tab.
4. Disable ‘Tx Burst’ in ‘Advanced’ tab.
5. Enable ‘WMM’ in ‘QoS’ tab if you need to
use multimedia / telephony related
applications.
6. Disable ‘WMM – Power Save Enable’ in
‘QoS’ tab.
7. There could be too much people using the
same radio channel. Ask the owner of the
access point to change the channel number.
Please try one or more solutions listed above.
