COVERINGS
Model with ceramic side covering.
Covering parts list:
• side (11) n° 4 pz
• front/rear bar (10-12) n° 4 pz
• cast iron top (15)
• cast iron pellet cover (16)
• ceramic insert (14) n° 2 pz
• cast iron base (2)
After positioning the frame according to the
instructions shown in the
INSTALLATION INSTRUCTIONS
chapter, proceed as follows in the order shown:
• Remove the cast iron top (15) by loosening the 4
screws (x) beneath the cover of the pellet hopper
(16) and the 2 screws on the back part (y).
• Insert the 4 ceramic lateral sides from the top (11)
into the housing of the aluminium lateral proles
(10-12)
• Put the top back into place and fasten it
• Apply as much tape as is necessary into the cera-
mic insert housing (14) on the top (refer to g. A).
• Place the upper ceramic insert (14) into the centre
for it to t into the two housings and secure it into
place by pressing it lightly in order for it to bond
with the tape.
• Apply as much tape as is necessary onto the little
tooth of the lower cast iron front panel (refer to g.
B).
• Place the lower ceramic insert (14) into the centre
onto the little tooth and secure it into place by pres-
sing it lightly in order for it to bond with the tape.
ENGLISH
ENGLISH
2
94
49
60
11
11
11
11
x
y
x
y
x
x
15
14
14
14
11
11
12
10
10
12
15
16
16
14
14
(g. A)
(g. B)