810756

Edilkamin Code Evo Handleiding

10
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
CODE EVO
CODE J EVO
POLO EVO
POLO OPEN EVO
MANUAL
installation use maintenance
for all updates visit www.edilkamin.com
2
Sommario
1. NOTE ON EDITION AND LANGUAGE ................................................................................................ 4
1.1. Note on the language of the manual ................................................................................................. 4
1.2. Digital online edition .......................................................................................................................... 4
2. CE MARKING INFORMATION ............................................................................................................. 5
3. INTRODUCTION ................................................................................................................................... 6
3.1. Recipients of the manual ................................................................................................................... 6
3.2. General notes .................................................................................................................................... 6
3.3. Meaning of the symbols .................................................................................................................... 6
3.4. Product identification and warranty. .................................................................................................. 7
3.5. CE plate: Data and position .............................................................................................................. 7
3.5.1. Code Evo ...................................................................................................................................... 8
3.5.2. Code J Evo .................................................................................................................................... 8
3.5.3. Polo Evo ........................................................................................................................................ 9
3.5.4. Polo Open Evo .............................................................................................................................. 9
4. SAFETY INFORMATION .................................................................................................................... 10
4.1. General notes for the safe use of the product ................................................................................. 10
4.2. Recommendations and prohibitions for the safe use of the product ............................................... 11
4.3. Possible risks if the installation, operation and maintenance instructions are not followed ............ 12
5. DIMENSIONS ...................................................................................................................................... 13
5.1. Code Evo ......................................................................................................................................... 13
5.2. Code J Evo ...................................................................................................................................... 14
5.3. Polo Evo .......................................................................................................................................... 15
5.4. Polo Open Evo ................................................................................................................................ 16
6. TECHNICAL DATA ............................................................................................................................. 17
6.1. Technical data according to the product standard .......................................................................... 17
6.2. Technical data for sizing the chimney system................................................................................. 18
6.3. ECODESIGN technical data............................................................................................................ 19
7. UNPACKING ....................................................................................................................................... 21
7.1. Notes on unpacking ......................................................................................................................... 21
7.2. Packaging disposal instructions ...................................................................................................... 22
7.3. Remove from the pallet ................................................................................................................... 23
7.3.1. Code Evo ....................................................................................................................................23
7.3.2. Code J Evo ..................................................................................................................................24
7.3.3. Polo Evo ......................................................................................................................................25
7.3.4. Polo Open Evo ............................................................................................................................25
7.4. Removing the deflector protection .................................................................................................. 26
8. INSTALLATION .................................................................................................................................. 27
8.1. Fume outlet orientation .................................................................................................................... 27
8.2. Rear fume outlet orientation ............................................................................................................ 27
8.3. Positioning on the floor .................................................................................................................... 29
8.4. Preliminary remarks on installation ................................................................................................. 29
8.5. Checking the suitability of the installation room .............................................................................. 29
8.6. Heat protection and safety distances .............................................................................................. 29
8.7. Chimney system (Smoke duct, chimney flue and chimney pot) ..................................................... 30
8.8. Smoke duct, chimney flue ............................................................................................................... 30
8.9. Smoke duct ..................................................................................................................................... 30
8.10. The chimney flue ............................................................................................................................. 30
8.11. Ducted system ................................................................................................................................. 31
8.12. The chimney pot .............................................................................................................................. 31
8.13. External air intake ............................................................................................................................ 31
9. FITTING THE COVERS ...................................................................................................................... 33
9.1. Code Evo/Code J Evo ..................................................................................................................... 33
9.2. Polo Open Evo ................................................................................................................................ 36
10. FUEL: WOOD ..................................................................................................................................... 40
3
11. INSTRUCTIONS FOR USE ................................................................................................................ 41
11.1. Training before use ......................................................................................................................... 42
11.2. Steps for the first start-up ................................................................................................................ 42
11.3. Cold fire ignition ............................................................................................................................... 42
11.4. Power supply with a hot hearth ....................................................................................................... 42
11.5. Low draught operation ..................................................................................................................... 43
11.6. Heating air (convection) .................................................................................................................. 43
12. ADJUSTMENTS .................................................................................................................................. 44
12.1. Code Evo/Code J Evo ..................................................................................................................... 44
12.2. Polo Evo/PoloOpen Evo .................................................................................................................. 45
13. MAINTENANCE .................................................................................................................................. 46
13.1. Daily maintenance ........................................................................................................................... 46
13.1.1. Cleaning the glass.......................................................................................................................48
13.1.2. Cleaning of the external parts .....................................................................................................48
13.2. Cleaning the flue ............................................................................................................................. 48
13.3. Seasonal maintenance .................................................................................................................... 49
13.4. Repairs ............................................................................................................................................ 49
13.5. Summer break ................................................................................................................................. 49
13.6. Spare parts ...................................................................................................................................... 49
14. DISPOSAL .......................................................................................................................................... 50
14.1. Warnings for the correct disposal of the product ............................................................................ 50
14.2. Disposal of the components of the appliance at the end of its service life ..................................... 50
15. ADVICE FOR POSSIBLE PROBLEMS .............................................................................................. 52
15.1. Notes on refractory materials (if any) .............................................................................................. 52
4
1. NOTE ON EDITION AND LANGUAGE
1.1. Note on the language of the manual
Original edition in Italian. Manuals in other languages are translated from the original manual in Italian.
1.2. Digital online edition
Dear Customer/Installer
Please read this document carefully together with the user manual which can be found inside our product.
The information contained in it are suggestions which in no way replace the responsibility of the installer -
maintenance technician.
All local and national laws and European Standards must be complied with as regards the correct sizing, installation,
maintenance and use of the product.
For installation and for anything not expressly mentioned, please refer to local and national regulations in the country
where the product is used.
The diagrams in this manual are purely indicative and in no way can the company be held liable.
How to download the manual:
access the download area, www.edilkamin.com
click on "Installation, use and maintenance manual".
Select the language, the product type and the product name from the drop-down lists.
Click on "download" to download the manual in pdf.
5
2. CE MARKING INFORMATION
The writer EDILKAMIN S.p.a., with registered office in Via P. Moscati 8 - 20154 Milan - Fiscal Code/VAT No.
00192220192, declares under its own responsibility that the products shown on the cover comply with EU Regulation
305/2011 and with the harmonised European product standard in force
The declaration of performance is available on the website www.edilkamin.com
It also declares that:
the products shown on the cover meet the requirements (where applicable) of the following European Directives:
2014/35/EU-Low Voltage Directive (per prodotti con componenti elettrici)
2014/30/EU-Electromagnetic Compatibility Directive (per prodotti con componenti elettrici)
2014/53/UE:RED (per prodotti con radiocomando)
2011/65/EU-RoHS Directive
2009/125/EU-Ecodesign
2010/30/EU-Labelling
6
3. INTRODUCTION
USER/INSTALLER
Dear Madam / Sir
We thank you and congratulate you for choosing our product. Please keep the manual for the entire service life of
the product. If lost, ask your retailer for a copy or download it from the download area on the website
www.edilkamin.com
3.1. Recipients of the manual
This manual is for:
the person who uses the product at home (“USER”)
the technician who installs the product (“INSTALLER”) who can find other material on the website
The recipient of the chapter (USER/INSTALLER) is indicated at the start of the chapter
3.2. General notes
After unpacking the product, check the integrity and completeness of the contents.
If any anomalies are found, immediately contact the retailer from whom it was purchased, to whom a copy of the
warranty certificate and of the tax document must be given.
All local and national laws and European Standards must be complied with as regards the correct sizing, installation,
maintenance and use of the appliance. For installation, maintenance and for anything not expressly mentioned,
please refer to the local regulations in force in the country where the product is used.
The diagrams in this manual are purely indicative: they do not always strictly refer to the specific product and in no
case are they contractual.
3.3. Meaning of the symbols
PROHIBITION:
Indication of operations that must NOT be performed, to avoid damage.
ATTENTION:
Carefully read and understand the message it refers to because failure to comply may result
in serious damage to the product and put the user's safety at risk.
INFORMATION:
Not following these instructions will compromise the use of the product.
7
3.4. Product identification and warranty.
The product is uniquely identified by a number, the “warranty slip or serial number” which can be found on the
warranty certificate. Please keep:
The warranty certificate that you found in the product
The tax document issued by the retailer
The declaration of conformity issued by the installer. Check local and national regulations.
The warranty conditions are indicated in the warranty certificate which can be found in the product and on the website
www.edilkamin.com
Example of warranty certificate
3.5. CE plate: Data and position
For positioning of the CE plate, see the specific model on the following pages
We recommend taking a photo of the CE plate, which shows the data according to the
harmonised product standard and the warranty slip (serial number), for all required uses.
The drawings are only indicative but not always refer to a specific model
8
3.5.1. Code Evo
3.5.2. Code J Evo
9
3.5.3. Polo Evo
3.5.4. Polo Open Evo
10
4. SAFETY INFORMATION
USER/INSTALLER
4.1. General notes for the safe use of the product
For the safe use of the product, carefully read the operating instructions
section of the manual.
If something is not clear, do not act on your own initiative but contact
the retailer or the installer. The names of Edilkamin's contracted and
licensed technical service centres are available ONLY at
www.edilkamin.com
The product is not designed to be used by people, including children,
with reduced physical, sensory or mental capabilities.
This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and
understand the hazards involved.
• Children shall not be allowed to tamper with the controls or play with
the appliance.
• Cleaning and user maintenance shall not be made by children without
supervision.
The product is not designed for cooking.
The product is designed to burn dry wood, in the quantities and in the
ways described in this manual.
The product is designed for indoor use and in environments with a
normal level of humidity. Therefore, keep the product in a dry place,
protected from adverse weather conditions.
The characters of the safety information are larger according to the standards
11
The product is designed to operate only with the covers fitted.
4.2. Recommendations and prohibitions for the safe use of the product
Use the product only after it has been installed by qualified technicians
in a workmanlike manner and in accordance with local and national
regulations.
Power up the product only after it has been fully assembled and the
covers have been fitted.
Do not install in rooms where there is a risk of fire. There is a risk of
damage to property and people.
Do not touch hot parts and, when the product is off but still hot, use
suitable precautions (e.g. fire resistant gloves).
Do not access internal parts.
Do not burn waste, plastics or anything other than wood. This may
cause product build-up, flue fires and damage to the environment.
Do not burn waste, plastic materials or anything other than wood
pellets. There is a risk of soiling the product, causing a fire in the
chimney and damaging the room.
Do not vacuum hot ash. There is a risk of damaging the vacuum cleaner
and possibly smoke in the room.
Do not clean using flammable or unsuitable products. There is a risk of
fire or backdraught.
Do not clean the glass when it is hot or using unsuitable products. There
is a risk of cracking the glass or causing irreversible damage to it.
Do not place flammable materials closer than the safety distances
indicated in this manual and in the declaration of performance. For
example, do not place drying racks closer than the safety distance.
There is a risk of fire.
12
Do not keep any type of flammable liquid near the product. There is a
risk of fire.
Do not block the ventilation openings in the room or the air inlets or
chimney. There is a risk of smoke entering the room with the risk of
causing damage to property and people.
Do not use the product as a support or as a ladder. There is a risk of
damage to property and people.
Do not attempt to use the product with the door open or throw hot
material out of the product. There is a risk of fire.
Do not use the product if the glass is broken.
Do not use water in case of fire and contact your local authorities.
4.3. Possible risks if the installation, operation and maintenance instructions are
not followed
Risk of BURNS in case of contact with hot parts.
Risk of ELECTRIC SHOCK in case of contact with internal parts if the
electric current is on (if present, ventilation or other electrical parts.
Check according to the model)
Risk of INJURY to hands if used carelessly or by people with reduced
skills, if the safety devices are removed or if access to the internal parts
is attempted.
Risk of FIRE if the installation, operation and maintenance instructions
are not followed.
Risk of ASPHYXIATION if failure to comply with the installation,
operation and maintenance instructions results in the obstruction of the
smoke exhaust and of the air intakes.
Risk of DAMAGE to property and people if the electrical system does
not have an efficient earthing system.
13
5. DIMENSIONS
USER/INSTALLER
A: smoke outlet
B: combustion air inlet
C: air outlet for ducting (if present)
D: delivery (for hydro products)
E: return (for hydro products)
F: load (for hydro products)
Dimensions in cm
5.1. Code Evo
Fireplace size:
28X22,5X56-38,5 (cm)
14
A: smoke outlet
B: combustion air inlet
C: air outlet for ducting (if present)
D: delivery (for hydro products)
E: return (for hydro products)
F: load (for hydro products)
Dimensions in cm
5.2. Code J Evo
Fireplace size:
28X22,5X56-38,5 (cm)
15
A: smoke outlet
B: combustion air inlet
C: air outlet for ducting (if present)
D: delivery (for hydro products)
E: return (for hydro products)
F: load (for hydro products)
Dimensions in cm
5.3. Polo Evo
Fireplace size:
28X22,5X56-38,5 (cm)
16
A: smoke outlet
B: combustion air inlet
C: air outlet for ducting (if present)
D: delivery (for hydro products)
E: return (for hydro products)
F: load (for hydro products)
Dimensions in cm
5.4. Polo Open Evo
Fireplace size:
28X22,5X56-38,5 (cm)
17
6. TECHNICAL DATA
USER/INSTALLER
6.1. Technical data according to the product standard
The data shown is indicative and obtained during the certification phase at a notified body according to current
regulations.
Quantity
CODE EVO
CODE J EVO
POLO EVO
POLO OPEN EVO
Rated power
Output power
8,1
kW
Yield
87,1
%
CO emissions at 13% O2
0,047
%
Fuel consumption
171
kg/h
Hopper capacity
2
kg
Draught
8,8
Pa
Minimum volume of installation room
41
m3
Heatable volume
210
m3
Smoke duct diameter
150
mm
Air intake duct diameter
100
mm
Weight with packaging
168
152
170
158
kg
Energy efficiency class (Regulation 1185/2015)
A+
Environmental Class according to the Italian
Ministerial Decree 186
5 stars
Minimum distance of combustible materials from
Back/Side/Front
400/400/1500
mm
Minimum distance of combustible materials from
Ceiling/Floor
NPD: (No declared
performance)
mm
NOTES ON THE TECHNICAL DATA
To calculate consumption, a heating value of 4.6 kW/Kg was used.
The heatable volume is calculated considering a heat demand of 33 Kcal/m³ per hour.
The product can work safety also with a higher draught. However, an excessive draught may result in switch-off
and/or decreased efficiency.
18
6.2. Technical data for sizing the chimney system
Quantity
CODE EVO
CODE J EVO
POLO EVO
POLO OPEN EVO
Rated power
CO2
9,6
%
Smoke temperature at exhaust
205
°C
Minimum draught
6
Pa
Flue gas flow rate
6,7
g/s
The chimney system and the installation as a whole must comply with the instructions given
in this manual and with all local and national regulations. The installer is responsible for the
installation
19
6.3. ECODESIGN technical data
20
21
7. UNPACKING
INSTALLER
7.1. Notes on unpacking
The materials that compose the packaging are neither toxic nor harmful and as such do not require special disposal
processes.
Storage, disposal or possibly recycling is the responsibility of the end user in accordance with the applicable laws.
The packaging may be different in different countries for regulatory and transport reasons.
Only qualified personnel can unpack the product, in accordance with the safety regulations
Perform all handling operations with the package upright, using suitable equipment and
complying with current safety regulations. Do not overturn the package and take great care
with the parts to be assembled.
DO NOT LEAVE PACKAGING WITHIN THE REACH OF CHILDREN. Packaging material (e.g.
plastic, sheets of film) can be dangerous for children. There is a risk of suffocation.
22
7.2. Packaging disposal instructions
DESCRIPTION
INSTRUCTIONS FOR COLLECTION
Wooden pallet
Separate collection
Wooden crate
Wood
Wooden pellet
Check the regulations of the relevant authority
Cardboard box
Separate collection
Cardboard corner
Paper
Appliance bag
Separate collection
Accessory bag
Plastic
Bubble wrap
Check the regulations of the relevant authority
Protective sheet
Check the regulations of the relevant authority
Labels
Check the regulations of the relevant authority
Polystyrene
Separate collection
Straps
Separate collection
Adhesive tape
Plastic
Hardware
Separate collection
Staples for straps
Metal
Fixing bracket
Check the regulations of the relevant authority
Guidance notes:
Comply with the local and national regulations
23
7.3. Remove from the pallet
7.3.1. Code Evo
Do not attempt to remove the product from the pallet before removing the screws. Only
qualified personnel can remove the product from the pallet, in accordance with the safety
regulations. The installer can find the complete instructions on the website.
THE DRAWINGS ARE INDICATIVE. THEY ARE USEFUL FOR ASSEMBLY, BUT THEY DO NOT
ALWAYS REFER TO THE SPECIFIC MODEL.
24
7.3.2. Code J Evo
25
7.3.3. Polo Evo
7.3.4. Polo Open Evo
26
7.4. Removing the deflector protection
Before switching on the product, remove the deflector protection, which is no longer needed
The drawings are only indicative but not always refer to a specific model
27
8. INSTALLATION
INSTALLER
8.1. Fume outlet orientation
The product is designed to connect the fume outlet pipe from the top and rear.
The product is delivered configured for the fume pipe to exit from the top.
8.2. Rear fume outlet orientation
28
The drawings are only indicative but not always refer to a specific model
29
8.3. Positioning on the floor
The product does not have feet.
You can consider adding felt pads to ensure easier sliding of the product
8.4. Preliminary remarks on installation
Remember that:
The installation must be performed by qualified personnel;
All local and national laws and European Standards must be complied with when installing and using the product.
In Italy the reference is the standard UNI 10683;
In the case of installation in condominiums it is necessary an offer with positive recommendation of the
administrator;
In the case of installation in public places, check and comply with local regulations for these installations.
The product is designed to operate in all weather conditions. In case of special conditions, as strong wind, safety
systems may intervene forcing the switch off of the product. (if any)
Some indications of a general nature are given below, which do not replace the checking against the local standards
and do not bring any liability concerning the installer’s work.
8.5. Checking the suitability of the installation room
The volume of the room must be greater than that indicated in the technical table
The floor must be able to support the weight of the product and its accessories* (see the note in the paragraph
on heat protection)
Make sure that the product is levelled
Do not install in rooms where there is a risk of fire or explosion.
In Italy, check compatibility pursuant to UNI 10683 and UNI 7129 in the presence of gas products.
8.6. Heat protection and safety distances
All the surfaces of the building adjacent to the product must be protected against overheating.
The insulation measures to be taken depend on the type of surfaces present.
The product must be installed in accordance with the following safety conditions:
Minimum distance from any combustible materials: see the declaration of performance on the website
Place the product on a level surface
The diameter of the smoke outlet is not the diameter of the chimney system. The chimney
system must be sized according to national and local regulations.
In particular, (non-exhaustive list) refer to EN 13384, EN 1443, EN 1856, EN 1457 and to all local
regulations.
Avoid the infiltration of condensation water through the chimney flue. If necessary, install an
anti-condensation ring - ask your chimney sweep.
Damage caused by condensation water is not covered by the warranty.
In some countries, in special conditions, multiple chimney flue installations are allowed.
According to regional regulations, additional safety systems are required when connecting to
multiple chimney flues. Your chimney sweep/technician is available for further information.
30
In the case of installation with a wall made of wood or other flammable material, the smoke exhaust pipe must be
adequately insulated.
In the case of installation on a floor made of flammable and/or combustive material or with an insufficient load-bearing
capacity, it is advisable to place the product on a load distribution plate.
8.7. Chimney system (Smoke duct, chimney flue and chimney pot)
This chapter is written in accordance with European Standards EN 13384, EN 1443, EN 1856, EN 1457.
The installer must take these Standards and any other local regulations into account.
This manual is in no way to be considered as a replacement for current regulations.
The product must be connected to a suitable smoke exhaust system that guarantees the safe and complete
evacuation of the smoke produced by combustion.
Before positioning the product, the installer must make sure that the chimney flue is suitable.
8.8. Smoke duct, chimney flue
The smoke duct (duct connecting the fire box smoke outlet to the chimney flue inlet) and the chimney flue must,
among other regulatory requirements, in general:
Receive the smoke coming from only one product (it cannot receive the smoke coming from several products);
in some countries there are specific regulations: it is the responsibility of the installer to assess compliance with
local regulations.
Have a predominantly vertical development.
Not have any counter-sloping sections.
Have a preferably circular inner cross-section and in any case with a ratio between sides of less than 1.5.
End on the roof with a suitable chimney pot: it is forbidden to discharge directly from the wall or towards enclosed
spaces, even if outdoors.
Be made of materials with fire reaction class A1 pursuant to UNI EN 13501 or similar national Standard.
Be suitably certified, with an appropriate chimney plate if metal.
Maintain the initial section or vary it only immediately above the product outlet and not along the chimney flue
8.9. Smoke duct
If in metal, it must be provided with CE marking (EN 1856-2) or similar national legislation;
It cannot be made of flexible metal material
To control the flow we recommend a damper in case of high draft
8.10. The chimney flue
In addition to the general requirements applicable to the smoke duct and to the chimney flue, the chimney flue:
Must only be used to discharge smoke.
Must be correctly sized to meet smoke evacuation requirements (EN 13384-1 non-exhaustive example)
Is preferably insulated, made of steel and with a circular inner cross-section. If rectangular, the edges must
normally have a radius of not less than 20 mm and a ratio between internal dimensions <1.5.
Normally have a minimum height of 1.5 metres.
Maintain a constant cross-section.
Be waterproof and thermally insulated to ensure draught.
Preferably have a collection chamber for unburnt material and any condensation.
If pre-existing, it must be cleaned, to avoid fire hazards.
31
8.11. Ducted system
In addition to the general requirements applicable to the smoke duct and to the chimney flue, the ducted system:
Must operate under negative pressure.
Must be inspectable.
Must comply with local regulations.
8.12. The chimney pot
Must be windproof.
Must have an inner cross-section equivalent to that of the chimney flue and an outlet smoke passage cross-
section equal to at least twice the inner cross-section of the chimney flue.
In the case of paired chimney flues (which should be at least 2 m apart), the chimney pot that receives the solid
fuel product discharge or that of the highest floor must be at least 200 cm above the other.
Must go beyond the reflux area (in Italy, refer to Standard UNI 10683)
Must allow for maintenance operations to be performed on the chimney
8.13. External air intake
To replenish the oxygen burned during stove operation, it is necessary to provide a suitable external air intake in the
installation room.
The air intake must preferably be located at floor level and must have a passing surface of at least 200 cm² (Ø 16).
Alternatively, it is possible to draw the air for combustion directly from the outside.
Connect a Ø 10 cm pipe directly to the back of the product, applying a protection grille which must not reduce the
useful through section. The diameter of the pipe depends on the pressure drops.
It is advisable not to exceed 3 meters in length depending on the draft of the flue pipe.
32
The inflowing air can come from an adjacent room provided that:
The flow does not encounter any obstacles as it travels though permanent openings communicating with the
outside
The room adjacent to the installation room is never depressurised with respect to outside.
The adjacent room is not used as a garage or for activities causing a risk of fire, nor is it a bathroom or a bedroom.
The adjacent room is not a common room of the building
In Italy, Standard UNI 10683 indicates that ventilation is sufficient even if the pressure difference between the external
and the internal environment is maintained at 4 Pa or less
The installer who issues the declaration of conformity is responsible for this.
33
9. FITTING THE COVERS
INSTALLER
9.1. Code Evo/Code J Evo
34
35
36
9.2. Polo Open Evo
The drawings are only indicative but not always refer to a specific model
37
38
39
40
10. FUEL: WOOD
USER/INSTALLER
The product is designed to burn wood logs or sawdust logs.
Use dry wood logs (max humidity 20%)
Use logs of length (as per manual)
The use of damp wood leads to fouling of the product and the barrel, the risk of smoke and a lower yield than
declared.
Each type of wood has different characteristics, which also affect the combustion efficiency.
The data shown in this manual are with the wood used during the certification.
Generally speaking, wood can have a calorific value of 4.6 kWh/kg while fresh cut has a calorific value of around 2
kWh/kg
In general, we recommend beech, elm, or in any case class A1 wood in compliance with UNI EN ISO 17225-5
Pay attention to the prolonged use of wood rich in aromatic oils (e.g. eucalyptus). It can deteriorate cast iron
components.
Use the recommended quantities of wood.
An overload causes overheating resulting in damage:
possible deformation of the internal parts;
possible irreversible changes in the colour of the paint on the metal parts
for which neither Edilkamin nor the retailer will be able to answer.
For the protection of the environment and for safety reasons, DO NOT burn, among other
materials: plastic, painted wood, coal, bark waste.
The use of other fuels may damage the product.
DO NOT USE THE PRODUCT AS AN INCINERATOR.
41
11. INSTRUCTIONS FOR USE
USER/INSTALLER
The use of fuel other than the recommended wood may cause damage to the product
When the product is hot, do not place anything on the product
Be careful not to touch the smoke exhaust pipe if hot.
Expansion
Like all products, it heats up and cools down during the various phases. This results in normal
expansion.
This expansion may result in slight noises which are not a cause for complaint.
Smells
During the first start-ups, you may smell paint, but the smell will disappear in a short time.
Start the product in a well-ventilated room the first times it is used.
The product can be operated only after assembling the covers.
Use the glove provided to open the door
42
11.1. Training before use
In particular, to use it in the best way possible, we suggest discussing the following topics with the technician:
Operation
Fuel
Ignition
What to do in the event of problems
Use suitable for installation conditions
11.2. Steps for the first start-up
Be sure to have read and understood the contents of this manual.
Remove all flammable components from the product (manuals, labels, etc.). In particular, remove any labels from
the glass.
For the initial ignition of the hearth, always use the smallest wood logs.
Use the larger wood logs to re-fuel the fire.
Always place the wood well deep in the hearth, almost in contact with the rear wall of the same, so that even if it
slips, it does not come into contact with the glass.
11.3. Cold fire ignition
Check that the existing ash bed is not too high. If the ash bed becomes too high, there may be the risk that when
the firebox door is opened to add wood, any fragments of embers fall out of the firebox.
Place the air valve adjustment lever in the “fully open” position. The air for combustion will flow intensely to the
wood
in the firebox, to quickly achieve good combustion.
Place the wood in the hearth without cramming it excessively. Place an igniter between the wood logs, and light
it. Never use materials such as petrol, alcohol and similar to light the wood.
At this point, close the swing door and monitor for a few minutes. If the fire goes out, slowly open the door, put
another igniter between the logs and turn it back on.
11.4. Power supply with a hot hearth
Add wood when the fuel has been consumed almost to the state of embers.
Wearing the glove, slowly open (to avoid the formation of vortices which can cause fumes to escape) the hinged
door.
Add the desired quantity of wood to the firebox, placing it on the existing embers (within the quantity limits indicated
in the technical table).
The functioning of the product changes with the draught of the flue and the adjustment of the combustion air valve
The technician is responsible for teaching the customer how to use and perform maintenance
on the product.
Do not make changes to the installation conditions on your own initiative (including air
intakes)
43
11.5. Low draught operation
To draw in the air for combustion and to discharge the fumes, the firebox needs the draught exerted by the flue.
If the draught is weak, initially light a “starter” fire using small ignition material.
Once the correct draught has been restored, it will be possible to introduce fuel.
11.6. Heating air (convection)
The hot air arrives in the room with natural motion (natural convection) without the aid of fans and heats by radiation
44
12. ADJUSTMENTS
USER/INSTALLER
12.1. Code Evo/Code J Evo
The drawings are only indicative but not always refer to a specific model
45
12.2. Polo Evo/PoloOpen Evo
The drawings are only indicative but not always refer to a specific model
46
13. MAINTENANCE
USER/INSTALLER
Before performing any maintenance operation, disconnect the product
from the mains power supply, if present
Regular maintenance is the basis for the proper operation of the product.
A lack of maintenance prevents the product from operating smoothly.
Any problems due to a lack of maintenance will invalidate the warranty.
13.1. Daily maintenance
Operations to be performed, with the product switched off, cold.
A suitable vacuum cleaner is required.
The entire procedure takes a few minutes.
The characters of the safety information are larger according to the standards
All cleaning operations of all parts must be carried out with the product cold
47
The drawings are only indicative but not always refer to a specific model
48
13.1.1. Cleaning the glass
Clean the glass only when it is cold. Use a dry brush and, if necessary, a specific detergent: spray a little detergent
on the glass and clean with a cloth. There are specific products that can be used to clean the glass (see our
Glasskamin price list).
13.1.2. Cleaning of the external parts
To clean the coating, do not use aggressive detergents.
Do not wet with cold water when the coating is hot, because the thermal shock could cause damage.
13.2. Cleaning the flue
By qualified personnel (see paragraph “Season maintenance”).
We recommend doing it before the season of use and whenever you notice that a layer of soot and tar, an easily
flammable substance, has formed inside.
Encrustations, in the presence of high temperatures and sparks, can ignite with serious consequences for both the
flue and the home.
Do not spray the cleaning product onto the painted parts or on the door gaskets.
49
13.3. Seasonal maintenance
USER/INSTALLER
It consists of general internal and external cleaning.
Remember that seasonal maintenance by a qualified technician, and according to national and local regulations, is
necessary.
13.4. Repairs
To be carried out only by licensed Edilkamin retailers/technical service centres. The names of the contracted and
licensed Edilkamin technical service centres and retailers are available ONLY on www.edilkamin.com.
13.5. Summer break
During the period of non-use, leave all doors , hatches and covers of the product closed.
In particularly humid areas, consider disconnecting the smoke fitting, and inserting a suitable product into the
combustion chamber to absorb moisture (e.g. desiccant salt bags, antioxidant tablets).
13.6. Spare parts
For any spare parts, contact the retailer or the technician.
Have any repairs carried out only by licensed Edilkamin retailers/technical service centres.
The names of the contracted and licensed Edilkamin technical service centres and retailers are available ONLY
on www.edilkamin.com.
The use of non-original components causes risks to the product and relieves Edilkamin from any liability for any
resulting damage. It also invalidates the warranty, as it is considered tampering.
Any unauthorised modifications are prohibited.
Seasonal maintenance is performed by the technical service centre, in accordance with local
and national regulations. The technician can find instructions on the website.
In the case of very frequent use of the product, it is advisable to clean the smoke flue and duct
every 3 months.
In any case, clean the chimney system at least once a year (check whether there are
regulations in your country).
If regular inspections and cleaning are not carried out, there will be an increased risk of fire in
the chimney.
50
14. DISPOSAL
At the end of its service life, dispose of the product in accordance with current regulations.
14.1. Warnings for the correct disposal of the product
The demolition and disposal of the product are the sole responsibility of the owner who will have to act in compliance
with the applicable laws in their country on safety, respect and protection of the environment.
14.2. Disposal of the components of the appliance at the end of its service life
The drawings are indicative
The following table lists the components of the appliance and the indications for correct separation and disposal.
In particular, the electrical and electronic components must be separated and disposed of at the centres authorised
for this activity, according to the WEEE directive 2012/19/EU.
A. EXTERNAL COVERS
C. INTERNAL LINING
If present, dispose of separately according to its
material:
• Metal
• Glass
• Tiles or ceramics
• Stone
If present, dispose of separately according to its
material:
• Metal
• Refractory materials
• Insulating panels
• Vermiculite
• Insulators, vermiculite and refractory materials that
have come into contact with the flame or exhaust gases
(dispose of in mixed waste)
B. GLASS AND DOORS
D. ELECTRICAL AND ELECTRONIC COMPONENTS
If present, dispose of separately according to its
material:
• Glass ceramic (fire door): dispose of in aggregates or
mixed waste
If present, dispose of separately according to its
material:
• Wiring, motors, fans, circulators, displays, sensors,
ignition plugs, electronic boards.
Do not dispose of with municipal waste.
Do not throw it away.
51
• Tempered glass (oven door): dispose of in the glass
Dispose of separately at authorised centres, as
indicated in the WEEE directive 2012/19/EU
E. METALLIC STRUCTURE
Dispose of separately in metal
G. HYDRAULIC COMPONENTS
Pipes, fittings, expansion tank, valves.
If present, dispose of them separately according to their
material:
• Copper • Brass • Steel • Other materials
F. NON-RECYCLABLE COMPONENTS
E.g. • Seals
• Rubber tubing
• Silicone or fibres
Dispose of them in mixed waste
52
15. ADVICE FOR POSSIBLE PROBLEMS
PROBLEM
ACTIONS
Smoke escaping from the hearth mouth
Check if the installation is correct (smoke duct, flue,
chimney pot; air intake).
Check that the wood used is dry.
Check if the door was opened too quickly
Uncontrolled combustion
Check the integrity of the gaskets
Check that the product door is closed
Abnormal blackening of the glass
Check that the wood used is dry, however consider that
after a few hours of operation it is normal that a light
layer of soot forms on the glass.
Fire in the chimney
Remove ashes and embers with tools and metal
containers touched only wearing a fireproof glove and
possibly in safe conditions
Request the intervention of the authorities in the event
of a fire
Odours
The first time it is switched on, a smell of paint is normal.
Check if the product is dirty or dusty
15.1. Notes on refractory materials (if any)
The internal refractory materials are designed to withstand normal use.
Their cleaning is ensured by good combustion.
The main damage to refractory materials derives from:
Accidental bumps
Use of non-ecological fire lighters
Loads of wood beyond the recommended
Use of fuels other than those recommended
Neither Edilkamin nor the retailer will be held liable for damages caused in the ways described above
If the problems are not resolved, contact the reseller or, in countries where present, the
Authorised Technical Assistance Centre.
They will be able to answer under guarantee only in case of proven defect of the product.
53
54
55
The names of Edilkamin&Co. official, authorised technical assistance centres (CAT) and distributors
are available ONLY a www.edilkamin.com
942578-GB
cod. 942578-GB I 10.23/B
… 10 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Edilkamin Code Evo bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Edilkamin Code Evo in de taal/talen: Engels als bijlage per email.

De handleiding is 5.57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Edilkamin Code Evo

Edilkamin Code Evo Gebruiksaanwijzing en installatiehandleiding - Nederlands - 56 pagina's

Edilkamin Code Evo Gebruiksaanwijzing en installatiehandleiding - Deutsch - 56 pagina's

Edilkamin Code Evo Gebruiksaanwijzing - Français - 56 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info