727492
15
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
Portable Air Conditioner 12
The Fan button is used to change the fan speed between High Medium,
Low and Auto while in Cooling and Fan Only modes.
Press the Fan button to select the fan speed. The LED indicator light next
to the High, Medium, or Low will light up. The Automatic Fan speed
setting does not have a light.
The timer can be used to either turn the unit on or off after a number of
elapsed hours. The timer is adjustable between 1-10 hours in half-hour
increments and from 10-24 hours in one hour increments.
How to set the unit to automatically turn on:
1) Press the Timer button while the unit is powered off. The Timer On indicator
LED will light up.
2) Use the Up and Down buttons to set the time (displayed in hours). The unit will
count down the time remaining. After the selected time passes, the unit will
automatically turn on.
How to set the unit to automatically turn off:
1) Press the Timer button while the unit is powered on. The Timer Off indicator
LED will light up.
2) Use the Up and Down buttons to set the time (displayed in hours). The unit will
automatically count down and turn off after the selected time elapses.
Note: If the unit displays an E1 or E2 error code, the timer is cancelled.
The LED Display will show the set temperature by default. It will show the room
temperature while in Dehumidify and Fan Only modes. You can switch between
Fahrenheit and Celsius by holding both the Up and Down Buttons simultaneously
for 5 seconds. If you enabled the Timer, the LCD Display will show the hour(s)
set.
Error Codes
The display may show the following error codes:
E1 – Room temperature sensor error.
E2 – Evaporator temperature sensor error.
E4 – Display panel communication error.
If the unit displays the error codes E1, E2, or E4, power the unit off, and then
unplug the unit for 15 minutes. Plug in and power on. If the issue persists, please
contact customer service.
P1 – Bottom reservoir is full.
If the unit displays a P1 error code, drain the unit by following the “Draining the
Unit” section.
The Swing Button is used to adjust the louver swing to the desired angle. The
louver swings up to an angle of 6 degrees for each press of the button. Hold the
swing button for more than 2 seconds to initiate the auto swing features.
(Applicable to models with Swing feature only).
The Sleep Button is used to enable the Sleep mode. During the Sleep mode, the
set temperature will increase by 2 degrees after 30 minutes, then it will increase
by another 2 degrees after an additional 30 minutes and maintain this
temperature for 7 hours before it returns to the original temperature and ends the
Sleep mode. The Sleep mode is not available in Dehumidify and Fan Only
modes.
Fan Button
Timer Button
LED Display
Swing Button
Sleep Button
NOTE: To cancel the
timer, press the Power
button or set the timer to
0.0.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Edgestar PAC1401W bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Edgestar PAC1401W in de taal/talen: Engels als bijlage per email.

De handleiding is 0,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info