580132
8
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
UN PROBLEME ?
10
N’hésitez pas à nous appeler sur notre ligne d’assistance téléphonique (tel en fin de notice).
Nos techniciens se feront un plaisir de vous aider à parfaire votre installation.
him/her to listen into what is happening on
your side through the microphone & speaker
on the unit.
The Communication channel, once opened,
lasts for 3 minutes. The recipient will hear
repeated beep sound 15 second before the
Dialer hangs up the line.
If the recipient wants to have more time to
listen, he can press the "1" button on his
telephone set again to add another 3 minutes.
<
<
N
N
O
O
T
T
E
E
>
>
When the two ways communication
channel are opened, the Control Panel
will then stop the audible alarm to
allow
speech communication.
4. Terminating the Two Way
Communication
After two-way voice communication has been
initiated, the recipient can terminate the
communication by sending DTMF "0" or “9”
signal.
Terminating by signal “0”
If DTMF 0 signal is received, the two way
voice communication will terminate. Dialer will
continue to dial the next phone number and
activate the Control Panel Siren.
Terminating by signal “9”
If DTMF 9 signal is received, the two-way
voice communication will terminate. The Dialer
will cancel any further dialing and leave the
Control Panel Siren off as it is.
<
<
N
N
O
O
T
T
E
E
>
>
In any case, if the two-way voice
communication is not terminated by the
recipient, the Dialler will automatically go
on-hook as it is terminated by signal "0"
within 3 minutes of voice communication
time period.
5. Incoming Call
Step 1. Dial HA2000RTC, listen to 2 dial tones
and hang up
Step 2. Wait between 10s and 30s and dial
again.
Step 3. Listen to 2 beeps from the receiver.
Step 4. Press PIN Code (0000) and if the
operations were successful dialer will
hear a long beep
Step 5. Press the following numbers on the
phone to activate specific functions:
Press “1“ to activate 2-way communication.
Listen to 3 beeps.
Press “2“ to activate Arm Mode. Listen to
two beeps from the reciever. The Control
Panel will perform a long beep.
Press “3’ to activate Disarm Mode. Listen to
a beep from the receiver. The Control Panel
will sound two beeps
Press “9” or “0” to disconnect. Listen to 5
beeps from the receiver.
<
<
N
N
O
O
T
T
E
E
>
>
During incoming call if the Control Panel
HA2000 activates an alarm, Dialer will
do 6 beeps and will immediately
disconnect the phone line. Then the
HA2000RTC prepares for reporting.
If Dialer have not learnt in from the
Control Panel or HA2000SOS, the
function to Arm or Diarm from phone is
disabled.
How to install the Auto
Dialer
The Dialer can be mounted on the wall or placed on
the tabletop.
Wall mount
The easiest way to get to know the system
and get it up and running quickly is to get all
the devices and accessories programmed on
a tabletop before locating and mounting them.
The Control Panel can be mounted on the wall or
wherever desired. Ensure the Control Panel is
fitted at approximately chest height where the
display can be easily seen and the keypad
convenient to operate.
Find a suitable location for the Auto Dialer to be
installed.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Eden HA2000 RTC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Eden HA2000 RTC in de taal/talen: Engels als bijlage per email.

De handleiding is 0,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Eden HA2000 RTC

Eden HA2000 RTC Gebruiksaanwijzing - Nederlands - 10 pagina's

Eden HA2000 RTC Gebruiksaanwijzing - Deutsch - 9 pagina's

Eden HA2000 RTC Gebruiksaanwijzing - Français - 10 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info