668110
30
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
10 Why does robot fail to start cleaning on side brush can remove dust along bottom
appointment time? edge efficiently; there would be dust beyond
robot in the tiny area formed by two walls
Answer: a.Confirm whether there is much
which need to be removed by hand.
remaining battery. Appointment timing is not
applicable when robot is returning to charge 15. Why does the speed of robot slow down
after operating cleaning. b. Check if robot is sometimes?
under standby status.
Answer: When robot detects there is much
11. Why robot is not charging as it is put in garbage and dust on the floor, it would turn
the charger? The charging indicator does to low speed proceeding automatically.
not light as well.
16. Is there any danger to furniture and child
Answer: a. Examine whether the battery at when robot is proceeding?
the bottom is installed in place, if cover
Answer: No. There is a soft rubber buffer
screw is loose, you need to fasten it. b.
made of PPC in front of the host. It would try
Check if there is power supply for the socket.
other route once it touches furniture or child.
c. Please contact our after-sales service
17. Would robot affect pet?
when the failure is still there.
Answer: Robot makes low noise when
12. Why does not the remote control work?
operating, so there would be no shrill sound
Answer: a. The control distance is within 5
which may cause pet restless or even
meters. It would be insensitive if longer
distrust. If you keep pet at home, we suggest
distance. b. Check battery in remote control
you to notice the first time the robot
and make sure it is placed correctly. c.
operating.
Insure robot power supply is on, please get it
18. What should be noticed when cleaning
charged when you notice it shows low
the carpet?
battery on LCD. d. Use clean cloth to wipe
infrared transmitter on remote control and
Answer: Robot is not able to clean long hair
infrared receiver on robot. e. If the host is too
over 2 centimeters. Fold the banding first
close to virtual wall or charger, the signal of
when you start cleaning.
remote control will get interfered.
19. Does it matter to keep the robot at the
13. Why does not virtual wall work?
charger when not using it?
Answer: a. Insure the region blocked by
Answer: Yes. Robot will transfer to small
invisible light from virtual wall, which is the
currency to supplement charging. Please
region you do not want robot to get across.
avoid wrong operation by child.
b. The signal will get interfered if virtual wall
.
is too close to the charger. c. Check whether
the region you want is beyond the virtual
wall, we suggest you to purchase additional
virtual wall if necessary.
14. Would it be difficult for robot to clean the
corner as it is a round design?
Answer: Robot can detect wall by itself. It is
able to clean along the edge of wall under
automatic and border cleaning mode. Its
.
20 Is there any danger to wrongly touch the
docking electrode film between the host
and charger?
Answer:No.The two electrodes of charger is
of no voltage under output mode(when there
is no power supply); it's maximum voltage is
24V which is safe one under input
mode(when it is charging)
28
Downloaded From Vacuum-Manual.com Manuals
30

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ecovacs Deebot D58 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ecovacs Deebot D58 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,99 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info