EXAMPLES OF FLUE INSTALLATIONS.
Although we cannot keep track of or describe every single installation, option, or the local installation
regulations corresponding to your area, Ecoforest guarantees that the installations suggested below will enable
your stove to function properly, and to conform to minimum personal and material safety measures.
If you are installing your stove in a building, in addition to respect local regulations on gas flues, you should
consult with the residents’ association to avoid future problems.
Please read the entire manual carefully, especially the chapter on installation to ensure your stove operates
properly and at full power.
If the total pipe length exceeds 8m, it is recommended to increase one measure, being able to make the
whole assembly in the same diameter from the connection of the stove or increase section from 4 m.
4.25. The installation shown below is the one recommended by Ecoforest to get the best machine performance. The
pipe section will run at least 2 meters vertically through the interior of the house.
Drawing 8
Other installations are possible as well (please check with your authorised dealer.) Other possibilities are added
herebelow:
4.26. Outdoor pipe. Take into account the installation of double wall piping.
Drawing 9
