458757
22
Verklein
Vergroot
Pagina terug
1/58
Pagina verder
ENGLISH
Instruction manual ELEKTRONIKA PROFI
21
4 MACHINE INSTALLATION
The installation is to be carried out exclusively by qualified staff and according to the following
instructions and in compliance with valid laws.
The following chapters deal with the preparation of the machine, its electricalconnection, water supply connection
and drain connection. Please note that for water tank machines, only the subchapters “Preparation of the machine”
and “Electrical connection” are relevant.
4.1 Preparation for the installation
Place the machine on an even and stable surface. You can regulate the height of the machine by
adjusting the feet of the machine.
Never place the machine on hot surfaces.
4.2 Electrical connection
Make sure that the local main supply voltage corresponds to the information given on the type
plate on the front panel of the espresso machine.
Plug the machine only into an earthed socket and do not leave it unattended.
Do not roll or bend the power cord.
Do not use an extension cord/ do not use a multiple socket.
4.3 Water supply connection
Important!
Make sure that the water supply installation is connected to potable water supply with an operating
pressure ranging from 0 to 3 bar. In case of an operating pressure of more than 3 bar use a pressure
regulator.
Please note that often the pressure of the water supply varies. If the water supply pressure temporarily
exceeds 3 bar, use a pressure regulator.
Connect the water connecting hose of the machine to the water supply valve and bolt them together.
Important!
The connection of the machine to the water supply and the installation of the pressure regulator is
to be carried out by expert staff.
To avoid an early calcification of the machine we recommend to use a water softener/ water filter.
Conventional water softener/ water filter can be purchased at your specialised dealer. However,
please note that even when using a water softener/ water filter the machine needs to be descaled
regularly.
4.4 Drain connection
By default, also in machines with water connection the user can dispose of the excessive water by regularly emptying
the drip tray.
However, it is possible to belatedly install a direct connection to the drain system. Therefore, find a fitting and a
drain hose in the product delivery.
Important!
In case you should go for a direct connection of the machine to the drain system, a hole has to be
drilled in the drip tray. This work can be carried out by expert specialised staff or by ECM
Manufacture service.
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ecm ELEKTRONIKA PROFI bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ecm ELEKTRONIKA PROFI in de taal/talen: Nederlands, Duits, Engels als bijlage per email.

De handleiding is 3,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info