VCR on the TV key VCR* 992 TV,
then TV* VCR Code
TV on the VCR key TV* 992 VCR,
then VCR* TV Code
* Hold down the device key until the red light stays on, then release the device key (the light
will start flashing).
To reset a device key to its original function, press:
TV Key TV* 992 TV
VCR key VCR* 992 VCR
* Hold down the device key until the red light stays on, then release the device key (the light
will start flashing).
5.4 Teletext and Fastext
The Tri Control is designed to operate the basic functions of teletext (text on, text off, expand and
hold).
Symbol Title Description
TEXT Puts the Television in the teletext mode.
TV Switches the Television back to regular viewing mode. On
some Televisions, this may be done by pressing the TEXT
key several times.
EXPAND Shows the top half of the teletext page in larger letters. By
pressing again, you can see the bottom half of the teletext
page enlarged.
To return to regular teletext viewing, press the EXPAND key
again, or press the TEXT key, depending on your television.
HOLD/STOP Stops changing pages.
The keys marked red, green, yellow and blue are used to access the fastext functions of your TV.
Important note: For a more detailed explanation of teletext and fastext, please refer to the
manual of your Television. Remember, different Televisions control teletext and fastext features
in different ways. Not all of the teletext functions may be available for your particular model.
5.5 Resetting the remote
N You can execute a return to default (reset) by holding Down the SAT key until
the red light stays on. Release the SAT key, the red light will start flashing. Press 981
(The red light will flash four times)
Note: all installation done will be erased! You will have to start the installations
again from the beginning.
