782661
18
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
2Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator 3
Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator
Phone: 866-356-1992 | Email: Support@eccotemp.com Address: 315 - A Industrial RD Summerville, SC 29483 Phone: 866-356-1992 | Email: Support@eccotemp.com Address: 315 - A Industrial RD Summerville, SC 29483
Important Safety Instructions ________________________________________________ 4
Technical Data _________________________________________________________ 5-6
General Information ______________________________________________________ 7
Technical Description ______________________________________________________ 8
Installation Instructions ___________________________________________________ 8
Plumbing Connections _____________________________________________________ 9
Temperature & Pressure Relief Valve __________________________________________ 9-10
Filling The Water Heater ____________________________________________________ 11
Electrical Connections _____________________________________________________ 11
Instructions For Use ______________________________________________________ 12
Maintenance Instructions _________________________________________________ 13-15
Troubleshooting ________________________________________________________ 16
Schematic & Parts List ____________________________________________________ 17
Warranty ____________________________________________________________ 18
Table of Contents
2Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator 3
Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator
Phone: 866-356-1992 | Email: Support@eccotemp.com Address: 315 - A Industrial RD Summerville, SC 29483 Phone: 866-356-1992 | Email: Support@eccotemp.com Address: 315 - A Industrial RD Summerville, SC 29483
4Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator 5
Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator
Phone: 866-356-1992 | Email: Support@eccotemp.com Address: 315 - A Industrial RD Summerville, SC 29483 Phone: 866-356-1992 | Email: Support@eccotemp.com Address: 315 - A Industrial RD Summerville, SC 29483
1. READ All.. INSTRUCTIONS BEFORE USING THIS WATER HEATER.
2. This water heater must be grounded. Connect only to properly grounded outlet.
See GROUNDING INSTRUCTIONS found on page 10.
3. Install or locate this water heater only in accordance with the provided installation instructions.
4. Use this water heater only for its intended use as described in this manual.
5. Do not use an extension cord with this water heater. If power is not available adjacent to the
water heater, contact a qualied electrician to have a receptacle properly installed.
6. As with any appliance, close supervision is necessary when used by children.
7. Do not operate this water heater if it has a damaged cord or plug, if it is not working properly,
or if it has been damaged or dropped.
8. Only qualied service personnel should service this water heater. Contact nearest authorized
service facility when questions arise or service is required.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: When using electrical appliances, safety precautions
to reduce the risk of re, electric shock or injury to persons should
be followed, including:
The manufacturer and/or distributor is not responsible for damages caused by improper
installation, or failure to follow the instructions in this manual.
A QUALIFIED, LICENSED TECHNICIAN MUST ALWAYS INSTALL THE WATER HEATER AND CONDUCT
ALL SUBSEQUENT SERVICE WORK AND/OR MAINTENANCE.
KEEP THESE INSTRUCTIONS
FILL THE TANK COMPLETELY FULL WITH WATER AND HAVE WATER FLOWING FROM THE HOT
WATER FAUCET BEFORE ACTIVATING POWER TO THE HEATER FOR THE FIRST TIME OR DAMAGE
WILL RESULT.
IMPORTANT!!!!
4Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator 5
Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator
Phone: 866-356-1992 | Email: Support@eccotemp.com Address: 315 - A Industrial RD Summerville, SC 29483 Phone: 866-356-1992 | Email: Support@eccotemp.com Address: 315 - A Industrial RD Summerville, SC 29483
Technical Data
MODEL
Capacity
Voltage
Power @ 120 VAC
Max. Water Pressure
Weight (empty)
Amperage
Phases
Gallons
VAC
Watts
psi
lbs.
Amps
EM-2.5
2.5
110-120
1440
150
20
12
1
EM-4.0
4.0
110-120
1440
150
25
12
1
EM-7.0
7.0
110-120
1440
150
27
12
1
6Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator 7
Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator
Phone: 866-356-1992 | Email: Support@eccotemp.com Address: 315 - A Industrial RD Summerville, SC 29483 Phone: 866-356-1992 | Email: Support@eccotemp.com Address: 315 - A Industrial RD Summerville, SC 29483
Model I Barang
EM-2.5
EM-4.0
EM-7.0
A(in)
13. 6”
15. 2”
17. 2”
B(in)
13. 6”
15. 2”
17. 2”
C(in)
11”
12. 2”
14. 2”
A
B
C
EM-2.5, EM-4.0, EM-7.0
Power Light Thermostat Indicate Light
Overheat Limiter Heating Element
Power Plug
Thermal
Cutout Thermostat
Power Lamp
(Green)
Heating Element
Heating Lamp (Red)
6Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator 7
Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator
Phone: 866-356-1992 | Email: Support@eccotemp.com Address: 315 - A Industrial RD Summerville, SC 29483 Phone: 866-356-1992 | Email: Support@eccotemp.com Address: 315 - A Industrial RD Summerville, SC 29483
GENERAL INFORMATION
The Eccotemp Mini-Tank Water Heaters can be used in most under the counter,
point of use applications. EM models are designed to supply hot water for all hand
wash and kitchen sinks in a residential environment.
EM models can replace traditional central hot water heaters thereby conserving
water and reducing energy waste.
The Eccotemp Mini-Tank Water Heaters are lightweight and compact and
manufactured for easy installation. EM models can be mounted on the wall with
included hardware, or freestanding.
EM models are designed to operate at 150-psi maximum water pressure. Install a
pressure-reducing valve if your water pressure is greater than 150-psi.
CAUTION!: The manufacturer cannot be responsible for the damage caused by
improper installation or by failure to follow instructions in this manual. Comply
with the Installation Instructions before connecting to electrical outlet.
CAUTION: The thermostat has been pre-set at the factory to 51.7°C (125°F) or
lower to reduce the risk of the scald injury.
CAUTION!: Hydrogen gas can be produced in a hot water system served by this
heater that has not been used for a long period of time (generally 2 weeks or
more). Hydrogen gas is extremely ammable. To reduce the risk of injury under
these conditions, it is recommended that the hot water faucet be opened for
several minutes at the nearest and most distant sink being served by this water
heater before using any electrical appliance connected to the hot water system
{i.e. Dishwasher). If hydrogen gas is present, there will probably be an unusual
sound such as air escaping through the faucet as the water begins to ow. There
should be no smoking or open ame near the faucet at this time.
WARNING: Installer should review the contents of this manual with
the owner upon completion of the installation, and the manual should
remain with the owner and placed in a location close to the water
heater.
8Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator 9
Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator
Phone: 866-356-1992 | Email: Support@eccotemp.com Address: 315 - A Industrial RD Summerville, SC 29483 Phone: 866-356-1992 | Email: Support@eccotemp.com Address: 315 - A Industrial RD Summerville, SC 29483
TECHNICAL DESCRIPTION
There are three Eccotemp Mini tank models, a 2.5-gallon, a 4-gallon and a 7-gallon
model. The pressure vessel (water tank) is welded, glass lined steel and is
equipped with an anode rod. The water heater is equipped with a thermostat and
a high limit temperature switch. A temperature/pressure relief valve is supplied
with the unit.
INSTALLATION INSTRUCTIONS
MODELS: EM-2.S, EM-4.0, EM-7.0
A licensed professional must complete the installation adhering to all state and
local codes. The manufacturer will not be liable for any damages because of
failure to comply with these installation instructions or because of improper
installation performed by an unqualied installer.
CHOOSE A LOCATION that allows ease of access for maintenance ideally with at
least 9 clearance at the top from the ceiling, cabinet, or any adjacent walls.
WALL MOUNTING
Fasten the supplied mounting bracket to the wall. Use screws that are suitable for
the wall material and the weight of the water heater lled to capacity (EM-2.5-41
lbs.; EM-4.0-57 lbs.; EM-7.0-76 lbs.). Hang the water heater on the bracket and
pull downwards on the water heater to ensure that both ngers of the bracket are
seated in the mounting slots.
Conrm your water piping orientation (hot and cold) before wall mounting.
ONLY INSTALL IN VERTICAL POSITION.
Heater can also sit on the oor. ONLY INSTALL IN VERTICAL POSITION!
EM models can be installed under the sink.
8Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator 9
Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator
Phone: 866-356-1992 | Email: Support@eccotemp.com Address: 315 - A Industrial RD Summerville, SC 29483 Phone: 866-356-1992 | Email: Support@eccotemp.com Address: 315 - A Industrial RD Summerville, SC 29483
PLUMBING CONNECTIONS
Connect the cold-water inlet pipe to the inlet nipple (marked with a blue ring) and
the hot water outlet pipe to the outlet nipple (marked with a red ring).
IMPORTANT: If Water pipes are copper or bronze, use dielectric connections to
prevent corrosion. Failure to provide dielectric insulation may result in premature
tank or nipple failure and may void your warranty. Ensure that the water heater
is installed in a level position. Install a shut off valve on the cold water side of the
water heater. The valve is for servicing and the valve should be in the open position
when the water heater is in operation. In order to protect the water heater from
heat damage due to soldering, solder a piece of tubing to a threaded UNION tting
before screwing the UNION to the tank.
DO NOT APPLY HEAT DIRECTLY TO INLET OR OUTLET CONNECTIONS.
TEMPERATURE AND PRESSURE RELIEF VALVE:
CAUTION!: Install the Temperature/Pressure Relief Valve supplied with the water
heater!
CAUTION: To reduce the risk of excessive pressures and temperatures in this
water heater, install temperature and pressure protective equipment required
by local codes and no less than a combination temperature and pressure relief
valve certied by a nationally recognized testing laboratory that maintains
periodic inspection of production of listed equipment or materials, as meeting
the requirements for Relief Valves and Automatic Gas Shutoff Devices for Hot
Water Supply Systems, ANSI Z21.22. This valve must be marked with a maximum
set pressure not to exceed the marked maximum working pressure of the water
heater. Install the valve into an opening provided and marked for this purpose in
the water heater, and orient it or provide tubing so that any discharge from the
valve exits only within 6 inches above, or at any distance below, the structural
oor, and does not contact any live electrical part. The discharge opening must
not be blocked or reduced in size under any circumstances.
Install a discharge pipe from the temperature/pressure relief valve terminating
at a sink or drain. DO NOT CAP OR PLUG THE END OF THE DISCHARGE PIPE. THE
DISCHARGE PIPE MUST BE UNOBSTRUCTED AND FULLY SIZED.
A nationally recognized test lab that maintains periodic inspections of the listed
equipment and meets the requirements for relief valves certies the T/P valve and
automatic shut off devices for hot water supply systems ANSI Z21.22.
10 Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator 11
Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator
Phone: 866-356-1992 | Email: Support@eccotemp.com Address: 315 - A Industrial RD Summerville, SC 29483 Phone: 866-356-1992 | Email: Support@eccotemp.com Address: 315 - A Industrial RD Summerville, SC 29483
The T/P valve is marked with a maximum pressure, which does not exceed the
maximum working pressure of the water heater (150 PSI).
Install the T /P valve into the threaded opening at the top of the water heater
and orient the discharge tubing so that any discharge from the valve will exit
within 6 inches above, or at any distance below the structural oor, and cannot
contact any live electrical part.
T /P Valve Discharge pipe:
1. Must NOT be smaller in diameter than the outlet diameter of the valve, or have
any reducing couplings.
2. Must NOT be plugged or blocked.
3. Must be made of suitable material for hot water.
4. Must not be over 15 in length.
5. Must not have more than two elbows.
6. Must terminate at an adequate drain.
7. Must not have a shut off valve between relief valve and tank or relief valve and
termination of discharge.
CLOSED SYSTEM THERMAL EXPANSION: Periodic discharge of the T /P relief valve
or failure of the element gasket may be due to thermal expansion in a closed
water supply system. The water utility supply meter may contain a check valve,
backow preventer or water pressure-reducing valve that will create a closed
water system. During the heating cycle of the water heater, the heated water
expands causing pressure inside the water heater to increase. The T /P relief valve
may discharge hot water under these conditions that results in a loss of energy
and a build up of lime on the relief valve seat.
To prevent this from happening, there are two recommendations:
1. Install a diaphragm-type domestic hot water expansion tank (suitable for
potable water) on the cold water supply line. The expansion tank must have a
minimum capacity of 1.5 U.S. gallons for every 50 gallons of stored water.
2. Install a 125-PSI pressure relief valve in the cold water supply line. Make
sure the discharge of this valve is directed to an open drain and protected from
freezing.
Contact your local water utility or plumbing inspector for information on how to
control this situation. Never plug the outlet of the relief valve.
18 Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator 19
Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator
Phone: 866-356-1992 | Email: Support@eccotemp.com Address: 315 - A Industrial RD Summerville, SC 29483 Phone: 866-356-1992 | Email: Support@eccotemp.com Address: 315 - A Industrial RD Summerville, SC 29483
Warranty
COVERAGE
Eccotemp System LLC, guarantees this water heater to the Owner of the water heater at the original installation
location against defects in material a workmanship for the periods specied below.
WARRANTY PERIOD
1.The Inner Tank - If the inner tank leaks within ve (5) years from the date of original installation of the water
heater, because of a defect in material or workmanship, Eccotemp will furnish to such Owner a new heater of the
then prevailing comparable model.
2. Any Component Part Other than The Original Inner Tank.
If any component part (other than the inner tank) proven to be defective in material or workmanship within one (1)
year from the date of original installation of the water heater, Eccotemp will furnish the Owner with a replacement
of the defective part(s)
3. Verication of Date of Original Installation. When Owner cannot verify or document the original date of
installation, the warranty period begins on the date of manufacture marked on the tag afxed to the water heater.
EXCLUSIONS
1.THIS LIMITED WARRANTY SHALL BE THE EXCLUSIVE WARRANTY MADE BY THE MANUFACTURER AND IS MADE IN
LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED (WHETHER WRITTEN OR ORAL), INCLUDING, BUT NOT
LIMITED TO,WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
2.The Manufacturer shall not be liable for any incidental, consequential, special or contingent damages or expenses
arising, directly or indirectly, from any defect in the water heater or the use of the water heater.
3.The Manufacturer shall not be liable for any water damage arising, directly or indirectly, from any defect in the
water heater component part(s) or from its use.
4. Manufacturer shall not be liable under this warranty if:
a) The water heater or any of its component parts has been subject to misuse, alteration, neglect or accident, or
b) The water heater has not been installed in accordance with the applicable local plumbing and/or building code(s)
and/or regulation(s), or
c) The water heater has not been installed in accordance with the printed manufacturer’s instructions, or
d) The water heater is not continuously supplied with potable water.
5. The OWNER and not the Manufacturer or his representative shall be liable for and shall pay for all eld charges
for labor or other expenses incurred in the removal and/or repair of the product or any expense incurred by the
owner in order to repair the product.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.
IMPORTANT: OWNER SHALL KEEP THIS MAKE A CLAIM.
NOTE: A water heater should be installed in such a manner that if it should leak, the resulting ow of water will not
cause damage to the area in which it is installed.
HOW THE OWNER CAN SECURE SERVICE OR MAKE A CLAIM
1. Owner should contact the dealer who sold the water heater covered by this warranty or
2. Owner should submit the warranty claim directly to Eccotemp at the address listed below, and they will
arrange for the handling of the claim
3. Whenever any inquiry or service request is made, be sure to include the water heater model number ,the series
number , date of installation, Dealer’s name and the watts and voltage.
4.When returning the water heater or component part(s), they must be individually tagged and identied with the
Returned Goods Authorization # issued by Eccotemp and shipped prepaid to Eccotemp at the address below
Eccotemp Systems LLC
315-A Industrial Road Summerville,SC 29483
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Eccotemp EM 2.5 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Eccotemp EM 2.5 in de taal/talen: Engels als bijlage per email.

De handleiding is 3.53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info