EasyGuard IP200
3.13. Upgrade
If there is some new firmware available from the supplier of this IP CAM, you
can upgrade the firmware on this page. Please ask for the correct information about
FTP server, username/password account and firmware filename from your supplier,
and then do this upgrade. A status message about the percentage done in the
upgrade procedure is displayed. Please be noticed that during the upgrade
procedure, do not power off the IP CAM, otherwise, the IP CAM could probably enter
into the safe mode(section 3.15). After the upgrade procedure is finished, the system
will restart automatically.
You can upgrade from the ftp server or from the local file in your computer.
During this upgrade procedure, do not try to modify other settings or view the
video.
Figure 3-20: Firmware upgrade settings page
Figure 3-21: Firmware upgrade status page