100967
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
5.3 Formatting the memory card
1. Press MODE button
2. Select system setting by 4 way keys
3. Press OK to confirm.
4. Select format storage press OK to confirm.
5. Press OK to format the card.
5.4 Setting the resolution
The camera can be set to three different resolutions.
1. Press MENU to set proper resolution.
Resolution: 2M (1600 x 1200), 3.1M (2048X1536), 5M (2560 x 1920)
2. Three different resolutions will be displayed. Select the desired resolution by using the
or buttons and then press the MENU button to confirm the selection.
5.5 Taking photographs
1. Turn the camera on by pressing the ON/OFF button.
2. Set the camera to photo mode ( ).
3. Depending on the distance to the object being photographed, use Macro switch to
adjust the distance. Select the flower symbol ( ) if you wish to take a close-up
photograph (11cm – 18cm.).
If you wish to take photograph of surroundings or people (0.5m - infinity), set the macro
switch to normal mode ( ).
4. If you are not sure if there is enough lighting, turn the automatic flash ( ) on by pressing
the flash button. (If the battery power is low, the flash won’t be activated).
5. Use the LCD screen to aim the object you wish to photograph.
6. Press Shutter button and hold the camera steadily for 2 to 3 sec, until the LCD display
turn on again.
Note: If you take photographs with the default camera settings, it is possible that the quality of
the photographs will not always be optimal. Different surroundings produce different
results. Adjust the camera settings as required.
5.6 Zoom in and out
5.6.1 The camera can zoom in up to 4 times in preview mode.
1. Zoom in by pressing the
button, a bar will appear on the left -hand side of the display.
4.0 is maximum zoom.
2. You can zoom out by pressing the down arrow button.
3. Press the shutter button once you have found the desired setting.
5.6.2 The picture can zoom in and move in playback mode
1. Zoom in by pressing the
button.
2. Press OK button, the picture can be moved 4 ways by pressing the 4way buttons.
3. Press OK button to return to zoom in mode.
5.7 Taking photographs using self-timer function
You can use the self-timer function when you wish to take a photograph of yourself or when you
wish to photograph an object where the camera must be as still as possible, for example on the
stand.
1. Set the camera to photo mode( ) .
2. Press the MENU button. The quick menu will appear.
3. Press
to self-timer mode, press or to set the delay time: 10/15/20 seconds or
off.
4. Press the MENU button to confirm. The self-timer function is now ready for use.
5. Aim the object you wish to photograph.
6. Press the SHUTTER button to take a photograph.
7. The self-timer indicator LED in the front will blink.
8. The photograph will be taken after the time delay you set, and the camera will beep
once.
5.8 Recording video clips
1. Press the MODE button and press or to select video mode ( ), Press OK to
confirm.
2. Press the SHUTTER button to start recording video, press the SHUTTER button again to
stop recording. The video clip will now be saved as an AVI file in the camera memory.
3. Press MENU to set proper resolution, EV and WB, and press MENU again to confirm.
5.9 Viewing photographs
Once you have taken some photographs or recorded video clips, you can view them on the
LCD screen. Follow the instructions given below to do this.
1. Press PLAYBACK button, press or to select the video clip or photo.
2. Press OK, it will show video clips and photos thumbnails on the LCD.
3. Press ,, or to navigate, then press OK, the selected photo will be shown on the
LCD
4. Press MENU to select SLIDE SHOW, and then press OK to confirm. The pictures saved
in your camera or your SD card will show automatically.
5.10 Playback video clips
1. When video clips are played, press
to play,
again to fast forward, and press
to
rewind.
2. Press or to adjust the volume
3. Select icon
to pause the playback
4. Press PLAYBACK key to exit.
5.11 Recording voice
1. Press MODE button,
2. Press or to select the voice recording mode, then press OK to confirm.
2. Press SHUTTER to start voice recording and press again to stop.
5.12 Playback voice files
1. Press MODE button, and press or to select the Voice Playback mode,
2. Press OK to confirm.
3. Press OK to playback the selected voice file.
4. Press or to adjust the volume
.
Caution:
This camera has no built-in speaker, you can playback the voice Via TV.
5.13 Delete photographs and video clips
You can choose to delete a single photograph / video clip, or delete all the photographs / video
clips from the memory.
5.13.1 Delete photograph
Follow the instructions given below to delete photograph.
1. Press PLAYBACK to entry playback mode.
2. Press the MENU button and select delete one/Delete all, press OK to confirm.
3. If you select Protect picture, your current file or images can not be deleted.
4. Press MODE to exit.
NOTE: Select ‘Deleting All’ Press OK to confirm all the files will be deleted.
5.13.2 Shortcut to delete one picture
1. Press PLAYBACK to entry playback mode.
2. Select the photo (video) you want to delete, press DELETE button.
3. Press OK to confirm or Menu to exit.
6. Installing the camera driver
The driver in the CD has to be installed:
1. For windows 98 SE: Download picture /video, and as a PC cam.
2. For windows ME, Windows 2000 and Windows XP: For using as a PC cam only.
(Download picture /video is driver free)
6.1 Uninstalling old drivers and devices
The most common problem occurring during installation is the presence of a driver for a similar,
old device. The best solution is remove all the drivers related to the old devices before installing
the new driver. Make sure you only delete programs for old, unused (similar) devices.
1. Enter Windows ‘Safe Mode’ (press F8 when starting Windows and then select ‘Safe
Mode’ from the menu which will be displayed).
2. Click on ‘Start – Settings – Control Panel’ and double-click on ‘Add/Remove Programs’
icon.
3. Find all the programs for similar, old devices and remove these by clicking on the
‘Add/Remove’ button. When in ‘Safe Mode’, it is possible for some programs to appear
twice. In that case, remove all the programs which appear twice.
4. Restart the computer.
6.2 Installing the driver for Windows 98 / Windows ME /
Windows 2000 / Windows XP
Note: Make sure all other programs are closed during the installation process.
Note: During installation for Windows XP, you may receive a message saying that the driver
has not been signed. This does not cause a problem for the functionality of the program.
Please click "Yes" to continue.
Note: For example, ‘D:\’ is used to indicate the CD-ROM drive. This may be different for your
computer.
1. Insert the CD-ROM into your computer’s CD-ROM drive. The installation program will
start automatically. If it does not start automatically, please do the following:
a) Select 'Run' from Windows Start menu.
b) Type [D:\SETUP.EXE] and click on 'OK' to start the Software Installer.
2. The Software Installer will appear.
3. Select the language you wish to use for the installation.
4. Click on ‘Install driver‘ to start the installation of the camera driver.
5. Follow the on-screen instructions.
6.3 Connecting the camera
The camera can be connected to the computer in two different modes: mass storage device
and as a PC camera for video conferencing on the Internet.
6.3.1 Connecting as a mass storage device
This option makes it possible to download photographs and video clips onto your computer.
1. Turn the camera on by pressing the ON/OFF button.
2. Press MODE button and select the system setting.
3. Press
button to set USB connection.
4. Press or button to choose the mass storage mode.
5. Connect the camera to the computer.
6. Windows will automatically detect the camera. You can use this camera as a removable
disk.
6.3.2 Connecting as a PC camera
When you connect the camera as a PC camera, you can use the camera as a web cam for
video conferencing on the Internet by using Windows NetMeeting or Windows Messenger.
(You must install the driver before connecting the Digital Camera to your computer. )
1. Turn the camera on by pressing the ON/OFF button.
2. Press MODE button and select the system setting.
3. Press
button to chook USB connection.
4. Press or button to choose the PC camera mode.
5. Connect the camera to the computer.
6. Windows will automatically detect the camera. You can use this camera as a web
camera.
7. Trouble shooting
Problem
Cause
Sol
ution
Cannot turn on the camera
by pressing the “power”
button.
Low battery power, battery
is missing or incorrectly
inserted the battery.
Install or replace the battery
correctly.
Photos are not saved or are
missing when taking
pictures.
The memory card or built-in
memory hasn’t been
formatted properly in the
camera.
Format the memory in SET mode
of the camera. Please refer to
section 5.3.
Cannot find removable disk
after connecting the camera
to the computer via U
SB.
1. Connection failure.
2. The mode of the camera
is not set to removable
disk properly
1. Make sure all cable
connections are secured and
restart the computer.
2. Set the camera to removable,
refer to section 3 (system setting,
USB connection).
Flash does not work. Battery Power is very low. Replace with fresh alkaline
batteries.
The batteries used up easily
Use wrong type battery. Replace with fresh alkaline
battery.
The photos are over
exposure
Set the flash light to force
mode in bright
environment.
Set the Flash light to Auto
mode .
The photos are blurry
1. The camera is not held
steadily
2. The lens of camera is
dirty
1. Hold the camera steadily until it
beeps when takes photo.
2. Clean the lens with soft dry
cloth.
Get a warning message:
“Capture device was not
detected” when trying to
open PC cam.
1. Conflict with another
camera or capture
device.
2. The mode of the camera
is not set to PC cam
mode properly.
1. Remove any other camera
driver completely from your
system. Sometimes you have to
re-install your system.
2. Set the camera to PC cam
mode, refer to section 3 (system
setting, USB connection).
Cannot preview image in
PC Camera mode.
“Preview” is not selected in
option Menu in PC.
Click “preview” in the “option”
menu to select it.
For EU only
AM-D331T-UGB-STD-R
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Easypix Aqua W311 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Easypix Aqua W311 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Easypix Aqua W311

Easypix Aqua W311 Gebruiksaanwijzing - Deutsch - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info