700189
16
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
16
ENGLISH
FUNCTIONAL INSTRUCTIONS
9
The LEVEL INPUT controllers determine the input sensitivity (adaptation to the output signal of the head unit) on the respective
channel pair (channel 1/2 or channel 3/4). The controller range is between 5 volts (MIN) and 0.2 volts (MAX).
OPERATING ELEMENTS
7
8
Connect the INPUT RCA jacks from the included cable adapter with the head unit by using appropriate audio signal cables. If
only the channels 1 and 2 are occupied, the INPUT MODE button should be in switch position 2CH.
The OUTPUT RCA jacks from the included cable adapter provide a linear full-range audio signal for driving additional ampliers.
10
The HIGH PASS controllers determine the frequency cut-off at the respective channel pair (channel 1/2 or 3/4) downwards. The
crossover frequency is continuously variable at CH1/2 from 50 Hz to 5000 Hz (5 kHz) and at CH3/4 from 10 Hz to 500 Hz.
11
12
13
The CH1/CH2 X-OVER switch selects the desired operating mode of channel 1/2:
FULL: Full-Range mode (the entire frequency range is amplied).
HP: High-Pass mode (frequency is limited downwards, adjustable by the HIGH PASS controller).
DUPE/COPY: For CH1/CH2, all the settings such as LEVEL INPUT, HIGH PASS, LOW PASS, and BASS BOOST and the bass
level of CH3/CH4 set with the supplied remote control will be adopted. This is particularly useful if you want to operate the chan-
nel pairs 1/2 and 3/4 bridged with two subwoofers.
The LOW PASS controller determines the frequency cut-off at channel pair 3/4 upwards. The crossover frequency is continu-
ously variable from 50 Hz to 5000 Hz (5 kHz).
The INPUT MODE switch is used to set whether the amplier should be driven by the head unit with only one stereo cinch audio
cable (2CH) or with two stereo cinch audio cables (4CH). Only with switch position 4CH, the so-called fader function on the head
unit is effective.
With switch position 2CH, the input signal from the INPUT CH1/2 is also routed to the channel pair CH3/4. Thus, only a stereo
cinch audio cable to LINE INPUT CH1/2 is necessary. When operating two subwoofers, it is also possible to use the subwoofer
signal output of the head unit if available.
6
If the POWER/PROTECT is green, the amplier is ready for operation. If the POWER/PROTECT is red, there is a malfunction.
Refer in this case to the section TROUBLE SHOOTING.
DUPE
9 12 16
1018 14 17
7 9 11 15
8 10 13 6
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw ESX QL600.4 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van ESX QL600.4 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info