48273
60
Verklein
Vergroot
Pagina terug
1/98
Pagina verder
54
SiS965/SiS965L SATA RAID Setup Guide
Installing Software Drivers
SiS RAID driver support Microsoft Windows XP/2000/Me/98SE.
1 For RAID function, SiS965 support RAID0, RAID1, RAID 0+1 and JBOD by
software RAID driver.
2 For RAID function, SiS965L support RAID0, RAID1 and JBOD by software
RAID driver.
3 Support the function of installing windows to RAID array.
New Windows 2000/XP Installation
1 Start the installation:
Boot from the CD-ROM. Press F6 when the message “Press F6 key if you
need to install third party SCSI or RAID driver” appears.
2 When the Windows 2000/XP Setup window is generated, press S key to
specify an Additional Device(s).
3 Insert the driver diskette into drive A: and press Enter.
4 Choose one of the following items:
“Windows 32bit SiS Raid/IDE Controller”,
“Windows 64bit SiS Raid/IDE Controller”,
that appears on screen, and then press the Enter key.
5 Press Enter to continue with installation or if you need to specify any addi-
tional devices to be installed, do so at this time. Once all devices are speci-
fied, Press Enter to continue with installation.
6 From the Windows 2000/XP Setup screen, press the Enter key. Setup will
now load all device files and then continue the Windows 2000/XP instal-
lation.
7 Please install the driver package again (ex. SiS RAID driver v2.01) while the
operation system has been setup.
4 RAID 0+1: Also known as “Stripe-Mirror”. At least four hard drives are re-
quired. RAID 0+1 is a combination of RAID 0 and RAID 1. Data is striped into
two drives then mirrored. It provides high performance and high data protec-
tion. This is a costly solution as RAID 1 because the two mirrored drives
represent an expensive insurance.
5 JBOD: (Just a Bunch of Drives). Also known as “Spanning”. Two or more hard
drives are required. Several hard disk types configured as a single hard disk.
The hard drives are simply hooked up in series. This expands the capacity of
your drive and results in a useable total capacity. However, JBOD will not
increase any performance or data security.
Existing Windows 2000/XP/98/Me Installation
1 Install the driver by executing SiS driver setup utility.
2 The drivers will be automatically installed.
Confirming Windows 2000/XP Driver Installation
1 From Windows 2000/XP, open the Control Panel from “My Computer” followed
by the System icon.
2 Choose the “Hardware” tab, then click the “Device Manager” tab.
3 Click the “+” in front of “SCSI and RAID Controllers” hardware type. The driver
“SiS182 Raid Controller” should appear.
If you would like to install windows to any RAID set, you should create
RAID from BIOS utility or SiS965/SiS965L RAID Utility first and then
follow the steps above.
60

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw ECS Elitegroup 649-M2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van ECS Elitegroup 649-M2 in de taal/talen: Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools als bijlage per email.

De handleiding is 2,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info