702446
8
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
8
USING YOUR DYSON APPLIANCE
PLEASE READ THE ‘IMPORTANT SAFETY INSTRUCTIONS’ IN THIS DYSON
OPERATING MANUAL BEFORE PROCEEDING.
ASSEMBLY
Lie the appliance on its back.
Attach the cleaner head by sliding it on to the connections on the lower front
part of the ball. Ensure the electrical plug on the cleaner head fits into the twin
- block connection on the body of the appliance, which is directly above the
airway. Push firmly: the cleaner head will click into place.
Stand the appliance up straight.
Attach the wand handle by sliding it on to the top of the appliance. The spring
clip in the handle will click into place.
Ensure the hose is straight. Press the red button on the hose. Slide the wand into
the hose.
Ensure the wand and hose sit in the recess of the handle. Slide the end of the
wand down into the handle to secure it.
Close the wand cap.
Slide the tool holder onto the side of the duct as shown.
Ensure the cyclone and clear bin unit is secured to the main body of
the appliance.
Attach the tools as shown. In use, the tools can be attached to either the hose or
the wand.
Wind the cable around the cable hooks. Secure with the clip.
To watch a short online video visit:
UK – www.dyson.co.uk/dc55gettingstarted
ROI – www.dyson.ie/dc55gettingstarted
OPERATION
Unwind the cable.
Plug the appliance into the mains electricity supply.
To switch ‘ON’ or ‘OFF’ press the red power button, located as shown.
To use, recline the handle. The stabiliser stand will automatically lift up.
After use, return the appliance to the upright position, pushing it firmly into
place. The stabiliser wheels will automatically lower.
Then unplug the appliance, coil the cable safely and put the appliance away.
Switch ‘OFF’ the appliance, unplug and ensure it is upright before:
changing or using tools
removing the hose or airway inspection parts.
Use the cyclone carry handle to carry the machine.
SELF-ADJUSTING CLEANER HEAD WITH
SUCTION CONTROL
This cleaner head is used for testing with the European Regulations:
No. 665/2013 and No. 666/2013.
POWERFUL SUCTION
For vacuuming of lightly soiled carpets, rugs and hard flooring.
Your appliance is pre-set to this level of suction when you take it out of
the box.
MAXIMUM SUCTION
For vacuuming durable floor coverings, hard floors and heavily soiled carpets
and rugs.
To switch to this setting, move the suction control slider on top of the cleaner
head as shown.
CAUTION: The suction of this mode can damage delicate flooring. Before
vacuuming, check the flooring manufacturers cleaning recommendations.
If the suction power of Maximum suction prevents easy maneuverability,
switch to Powerful suction mode.
To switch back to Powerful suction mode, move the suction control slider back
to its original position, as shown.
CARPETS OR HARD FLOORS
The brush bar will always default to ‘ON’ (spinning) each time you switch the
appliance ‘ON’ and recline it for cleaning.
The brush bar will not rotate when the appliance is upright.
To switch the brush bar 'OFF' (e.g. for delicate rugs and delicate flooring):
switch the appliance ‘ON’
recline the appliance
press the brush bar ‘ON/OFF’ button – the brush bar will stop spinning.
The brush bar will automatically stop if it becomes obstructed. See ‘Brush bar –
clearing obstructions’.
Before vacuuming your flooring, rugs and carpets, check the manufacturers
recommended cleaning instructions.
Some carpets may fuzz if a rotating brush bar is used when vacuuming. If this
happens, we recommend vacuuming with the brush bar switched 'OFF' and
consulting with the flooring manufacturer.
The brush bar on the appliance may damage some carpet types. If you are
unsure, turn ‘OFF’ the brush bar.
Check the brush bar regularly and clear away any debris (such as hair). Debris
left on the brush bar may cause damage to flooring when vacuuming.
LOOKING AFTER YOUR DYSON APPLIANCE
Do not carry out any maintenance or repair work other than that shown in this
Dyson Operating Manual, or advised by the Dyson Helpline.
Only use parts recommended by Dyson. If you do not this could invalidate
your guarantee.
Store the appliance indoors. Do not use or store it below 3°C (37.4°F). Ensure
the appliance is at room temperature before operating.
Clean the appliance only with a dry cloth. Do not use any lubricants, cleaning
agents, polishes or air fresheners on any part of the appliance.
If used in a garage, always wipe the base plate and ball with a dry cloth
after vacuuming to clean off any sand, dirt, or pebbles that could damage
delicate floors.
VACUUMING
Do not use without the clear bin and filters in place.
Fine dirt such as flour should only be vacuumed in very small amounts.
Do not use the appliance to pick up sharp hard objects, small toys, pins, paper
clips, etc. They may damage the appliance.
When vacuuming, certain carpets may generate small static charges in the
clear bin or wand. These are harmless and are not associated with the mains
electricity supply. To minimise any effect from this, do not put your hand or
insert any object into the clear bin unless you have first emptied it and rinsed it
out with cold water (see ‘Cleaning the clear bin).
Do not work with the appliance above you on the stairs. When cleaning stairs it
is recommended that the handle is not extended and that you use a tool on the
end of the hose rather than the wand.
Do not put the appliance on chairs, tables, etc.
Before vacuuming highly polished floors, such as wood or lino, first check that
the underside of the floor tool and its brushes are free from foreign objects that
could cause marking.
Do not leave the cleaner head in one place on delicate floors.
EMPTYING THE CLEAR BIN
Empty as soon as the dirt reaches the level of the MAX mark – do not overfill.
Switch ‘OFF’ and unplug before emptying the clear bin.
To remove the cyclone and clear bin unit, press down on the red button on the
top of the carrying handle on the cyclone.
To release the dirt, press all the way down on the same red button on the top of
the carrying handle on the cyclone.
To minimise dust/allergen contact when emptying, encase the clear bin tightly in
a plastic bag and empty.
Remove the clear bin carefully from the bag.
Seal the bag tightly, dispose as normal.
To refit:
ensure the airway in the bin base is clear of dust and dirt
close the clear bin base so it clicks into place
push the cyclone and clear bin unit into the main body of the appliance; it will
click into place
ensure the cyclone and clear bin unit is secure.
CLEANING THE CLEAR BIN
Remove the cyclone and clear bin (see ‘Emptying the clear bin’).
To separate the cyclone unit from the clear bin press the red button to open
the clear bin base. This exposes a small silver button behind the red opening
mechanism. Press the silver button (on its ribbed area) and separate the cyclone
unit from the clear bin.
Clean the clear bin with cold water only.
Do not use detergents, polishes or air fresheners to clean the clear bin.
Do not put the clear bin in a dishwasher.
Do not immerse the whole cyclone in water or pour water into the cyclones.
Clean the cyclone shroud with a cloth or dry brush to remove any lint and dust.
Ensure the clear bin is completely dry before replacing.
To refit:
fit the cyclone shroud into the clear bin so that the silver button clicks
and engages
close the clear bin base so it clicks into place
push the cyclone and clear bin unit into the main body of the appliance; it will
click into place
ensure the cyclone and clear bin unit is secure.
WASHING YOUR FILTERS
Your appliance has two washable filters, located as shown.
Check and wash the filters regularly according to instructions to
maintain performance.
Switch ‘OFF’ and unplug before checking or removing the filters.
The filters may require more frequent washing if vacuuming fine dust.
Wash with cold water only. Do not use detergents.
Do not put the filters in a dishwasher, washing machine, tumble dryer, oven,
microwave or near a naked flame.
Filter A
Remove the cyclone and clear bin (see ‘Emptying the clear bin’).
Release the catch on the front of the cyclone handle and then remove the filter.
Wash the filter with cold water only. Hold under a tap and run water through the
open end until the water runs clear. Turn upside down and tap out.
Squeeze and twist with both hands to make sure the excess water is removed.
Run water over the outside of the filter until the water runs clear.
Squeeze and twist with both hands to make sure the excess water is removed.
Stand the filter on its wide, open end to dry. Leave to dry completely for a
minimum of 24 hours.
Replace the filter into the cyclone. Swing the handle back into place. Ensure the
latch clicks to engage and is secure. Fit the cyclone and clear bin unit onto the
appliance (instructions above).
Filter B
Lie the appliance on its side.
To remove filter B:
turn the blue central locking dial on the outer cover of the ball anti-clockwise
until the cover is released
lift off the cover
turn the filter one-quarter anti-clockwise to release.
Wash the filter with cold water only.
Filter B should be rinsed and tapped out until the water runs clear, then tapped
out again to ensure all excess water is removed. (Tap on the plastic rim, not the
filter material.) Leave to dry completely for a minimum of 24 hours.
It is normal for the filter in the ball to turn grey in colour.
To refit filter B:
refit the filter on to the ball
secure the filter by turning it clockwise so the white arrows align.
When refitting the outer cover of the ball, keep turning the central locking dial
clockwise. When it starts to click it is locked.
To watch a short online video visit:
UK - www.dyson.co.uk/dc55filterwash
ROI - www.dyson.ie/dc55filterwash
BLOCKAGES – THERMAL CUT-OUT
This appliance is fitted with an automatically resetting thermal cut-out.
Large items may block the tools or wand inlet. If any part becomes blocked the
appliance may overheat and automatically cut-out.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Dyson DC55 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Dyson DC55 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info