Finding blockages
9
Turn power off and unplug before
emptying the bin.
If any part of your machine
becomes blocked, it may overheat
and then cut out. Unplug machine
and leave to cool down.
Please note: Clearing blockages is
not covered by your machine’s
guarantee. (Keep your proof of
purchase safe.)
Beware of sharp objects when
clearing blockages.
Secure all parts before using
the machine.
The ratchet noise warns you that
the brushbar is obstructed.
Disconnect the machine before
removing the obstruction.
Check tools are clear of blockages.
A Remove wand and check inside
wand and hose for blockages.
B Press hose release button at front
of machine and slide hose out
with lower cable winder at rear.
U bend inspection
C Tilt machine forward, slide out
U bend and check inside
for blockages.
Airway inspection
D Squeeze valve release catches and
check inside for blockages.
Brushbar obstructions
Lie cleaner on its front.
Undo fasteners using a coin and
remove soleplate.
Remove fluff and hair from brushbar.
Replace soleplate and tighten
fasteners.
Important information
A
B
C
D
