669057
75
Verklein
Vergroot
Pagina terug
1/88
Pagina verder
75
HOW TO USE
1. Insert your hands and the hand dryer will start automatically, creating sheets of air to scrape water from your hands.
2. Move your hands up and down slowly through the air.
TROUBLESHOOTING GUIDE
WARNING: RISK OF ELECTRIC SHOCK.
Problem Action
The hand dryer fails to start. Check fuse/circuit breaker is working and that the power supply is connected. Must be
performed by a qualified electrician.
If a safe method of switching is available, turn the unit on and off. If a safe method is
not available, a qualified electrician must perform this task.
The hand dryer sometimes cuts out when in use but
resumes operation after a period of time.
Check the air inlet is clean and free of dust. If the air inlet is dusty or dirty simply remove
the dust or debris with a soft cloth.
The dry time of the hand dryer has increased. Inspect the inlet grille for dust and remove.
Inspect filters and change if required.
The air flow from the hand dryer has decreased. Inspect the inlet grille for dust and remove.
Inspect filters and change if required.
If you have any further questions please contact the Dyson Helpline at 1-888-DYSON-AB.
USE IN FOOD PREPARATION AREAS
This hand dryer is suitable for use in food preparation areas. However to use a PC-ABS model in food handling areas
two rubber front fascia plugs must be installed. These are different from the plugs received with the unit.
If you are a food manufacturing, processing or catering unit please contact the Dyson Helpline in the number on the
back cover. You will receive a fascia plug pack, which includes the rubber plugs and instructions for fitting.
If you are installing this hand dryer in a food handling or food manufacturing environment, please contact the Dyson
Helpline for the specialist installation guide that supports this.
CLEANING
The hand dryer should be cleaned daily. Follow these 3 simple steps to ensure the machine performs to its best and
remains hygienic. Using the wrong cleaning method or product may invalidate your warranty.
1. Wipe all surfaces and the 4 sensor lenses with a soft cloth and non-abrasive cleaner. Particular attention should be
paid to the seals and sides of the unit.
2. Clean the air inlets on the base REGULARLY.
3. Clean the floor beneath and around the unit. This may be required more regularly in high use areas.
GENERAL ADVICE
All cleaning chemicals should be used exactly as indicated by the manufacturer’s instructions (including
appropriate dilution).
If a cleaning product is left on the machine for too long, a film will form. This may reduce the effectiveness of the anti-
microbial surfaces.
Any chemicals intended for use should first be tested on an inconspicuous area to confirm suitability.
Aside from cleaning chemicals, care should be taken to avoid any harmful fluids from coming into contact with the unit,
in particular oils and alcohol-based products.
CHEMICAL GUIDELINES
Many professional cleaning chemicals can be used. The following are some that are harmful to the unit and should not
be used. Use of these will invalidate your warranty.
Do not use:
Alcohol-acid mixes
Alcohol
Solvent /oil-based products
Quaternary ammonium
Alkali-bleach mixes
Foaming ingredients
Bleach or abrasive cleaners
Do not pressure wash
WATER GUIDELINES
This hand dryer has an IP35 certification.
Hand clean only. Do not pressure wash. Pressure washing may force water inside the casing, creating a risk
of electric shock and invalidate your warranty.
FILTER MAINTENANCE/AIR INLET
Regularly check the air inlet at the base of the hand dryer to ensure that it is free from dust and debris. Simply wiping
the inlet with a soft cloth should be sufficient to remove dust and debris.
If required for high usage environments, a Dyson filter change kit provides everything needed to change your machine’s
HEPA filter on site. Contact the Dyson Helpline at 1-888-DYSON-AB for more information.
Filter cleaning or replacement for your hand dryer can be carried out by carefully following the instructions given in the
filter change kit. If in any doubt, consult a qualified electrician or contact the Dyson Helpline at 1-888-DYSON-AB
for support.
SERVICING
If your hand dryer needs servicing, please call the Dyson Helpline at 1-888-DYSON-AB.
Also visit the website at www.dysonairblade.com
DISPOSAL INFORMATION
Please dispose of this product responsibly and recycle where possible.
CONFORMITY STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation, notwithstanding use by the general public in commercial, business and industrial environments. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the users authority
to operate the equipment.
PLEASE REGISTER AS A DYSON AIRBLADE dB HAND DRYER OWNER
To help us ensure you receive prompt and efficient service, please register your unit at www.dysonairblade.com
This will register your warranty, confirm ownership of your Dyson unit in the event of an insurance loss, and enable us to
contact you if necessary.
You will need your serial number, which is on the rating plate on the base of your unit, on a registration sheet in the box,
and also on an information sticker on the front of the unit when it is unpacked.
Please ensure all instructions and guidance in this operating manual and the installation guide are adhered to or your
warranty may be invalidated.
YOUR LIMITED WARRANTY
Terms and Conditions of the Dyson 5 year parts warranty and 1 year limited laborwarranty.
If you have registered your unit online, your warranty will start from the date of purchase. Please retain your proof of
purchase. If you do not have your proof of purchase, your warranty will start 90 days after the date of manufacture,
according to Dyson’s records.
This warranty will be void if the unit is installed and used in a country outside the one in which it was sold.
75

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Dyson-Airblade-dB---AB14

Zoeken resetten

  • Mijn Dyson AB14 geeft een kort geluidssignaal als de sensors een paar handen "zien", maar de motor slaat niet aan. Wat betekent dat kort signaal ? Gesteld op 9-9-2024 om 17:01

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Dyson Airblade dB - AB14 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Dyson Airblade dB - AB14 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 4,59 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Dyson Airblade dB - AB14

Dyson Airblade dB - AB14 Aanvulling / aanpassing - Alle talen - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info