648115
21
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
Why is the battery not lasting long (less than two hours after fully charged)?
To maximize battery usage, please follow these steps:
RESET the unit(s) while getting charged.
Charge the battery for at least 8 hours.
Unplug the power adapter and use the unit(s) on battery power until it shuts down by
itself.
Repeat steps 2 and 3 for 2 more times.
With each charge you will find out that the battery will last longer than the previous time. If
you do not use the unit(s) on battery power on a regular basis, we recommend you to use the
unit(s) on battery power until it shuts down on its own at least one a week use, to optimize
battery usage and life.
I installed the micro SD card, why does it still display “No SD card”?
Before installing the micro SD card, please turn off the parent unit. If you install the micro SD
card in ON mode, please press the RESET button to restart the parent unit.
The parent unit displays multi view (4 cameras). How to change to full screen display mode?
Quickly press the POWER / MULTI / BACK button to exit / enable multi view display.
How come the parent unit does not take any pictures and/or videos?
There is no micro SD card in the receiver unit. Insert an appropriate micro SD card in the
receiver unit.
The memory capacity of the micro SD card inserted is full. Delete any existing recordings
or replace the micro SD card in the receiver unit with a new one.
Why does the baby unit not transmit any audio/video signals?
The sensitivity of the voice activation (VOX) and/or motion detection is set too low. Please
Why does parent unit intermittently displays “Connecting camera #...” error message
and/or a black screen (no video)?
This problem is normally caused by presence of other wireless devices, especially a wireless
network router/adapter or another wireless Audio/Video device using 2.4GHz wireless
frequency.
We suggest to:
Why does the parent unit display “Camera # unavailable” error message?
“Camera # unavailable" message normally appears if you are using a single baby unit (or
only one baby unit is registered) but you have set Auto Scan to a setting other than
"Never".
Why doesn’t my monitor work on rechargeable battery even when the battery charging
level indicator shows battery is fully charged?
If the battery charging level indicator shows battery is fully charged as soon as you plug the
power adapter to the monitor, then it's possible that the battery is not installed properly.
Press the RESET button on the camera to change communication channel between the
units.
Change the wireless channel setting of your router from AUTO to either lower channels
2 or 3 (if that does not help then upper channels 10 or 11) to reduce interference from
wireless network.
If possible, do not keep other wireless devices within 3-5meters from camera and
monitor.
40 41
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Duux Video baby monitor bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Duux Video baby monitor in de taal/talen: Engels als bijlage per email.

De handleiding is 0,93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Duux Video baby monitor

Duux Video baby monitor Gebruiksaanwijzing - Nederlands - 42 pagina's

Duux Video baby monitor Gebruiksaanwijzing - Deutsch - 42 pagina's

Duux Video baby monitor Gebruiksaanwijzing - Espanõl - 42 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info