793660
5
Verklein
Vergroot
Pagina terug
1/11
Pagina verder
ASSFMBLY !àISTRUCTIONS : HOMETRATNER CONCEPT 2SOO
l. Attach the front foot (2) and the back foot (l) to the main body (1) using bolts ({), washers (7) and nuts
(§). Tighten using a spanner.
2. Attach the saddle stem (9) to the saddle (8) using nylon nuts and washers, and tighten using a spanner.
3. Slide the saddle stem ínto main body and pull seat adjustment knob (18) to select desíred height. Always
ensure knob is screwed and fitted tightly.
4. Release locking clip (ft) by pulling resistance band (13) ensuring band does not come completely out of clip.
Connect the resistance adjustment cable (14 and the resistance band and spring(i3), then connect the
computer cables (l§) in one, pull the cable out of the top of the handlebar stem for connection with the
computer. Then fit the handlebar stem (l!) to the main body(l) using the domed socket bolts (i0 and
washers fl/1. Tighten the bolts. Ensure all cables are tucked inside the handlebar stem. With tension knob i
@ set at minimum pull resistance band upwards so that the flywheel turns freety and re-tighten the
locking clip. I
5. Slide the handlebar (19) into the handlebar holder, then tighten with the butterflyknob (fitted). Fit the
handlebar grips (24 to the handlebar (put a little soapy water for easier assembty), and insert the small
plastic caps into the handlebar pipe.
6. Fit the computerQJ) to the handlebar stem bracket and insert the plug into the computer. lnsert the
earclip into the pulse terminal.
7. ldentify the left and right hand pedals 129;. Attach the right hand pedal to the right crank on the main
body and tighten by turning in clockwise direction. The left hand pedal must be fitted to the left hand crank
and tighten by turning in an anticlockwise direction.
TIPS
l. Follow this assembly manual carefully.
2. Make sure all bolts and nuts are securily tightened, using the provided locking washers.
3. This hometrainer has been designed for a long and unproblematic use. Please check all bolts and nuts
regular and apply lubrication to moving parts regular.
CAUTION
1. Do not wear loose fitting clothing that could become entangled in any moving parts.
2, Do always wear shoes when you exercise.
3. Keep the unit out of reach for children.
4. children should not be in the immediate area when the unit is being used.
5. Consult your physian before starting any exercise program.
6. Stop exercising immediately in case of nausea, shaking, shortness of breath, pain in the chest or
headache.
7. Do not exercise 45 minutes before eating or J hour after eating.
INSTRUCTIOI|S MONTTOR
Functions buttons
l.ilODE
SET
RESET
ST/STOP
Press to select each mode.
Set target values time, distance, calorie, and pulse.
One-touch for single function value reset. lf hold on the button for values of all functions
reset.
Press to start or stop the operation of functions.
-5-
5

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Dunlop-Concept-2500

Zoeken resetten

  • bediening van de display van de Dunlop Cardio 1200/
    Dunlop Concept/mode heb er nieuwe batterijen in gedaan
    maar geeft aleen de snelheid aan de rest blijf op 0 staan ?
    graag een antwoordt b.v.d Eddy. Gesteld op 28-2-2023 om 13:18

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Dunlop Concept 2500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Dunlop Concept 2500 in de taal/talen: Nederlands, Engels, Frans als bijlage per email.

De handleiding is 6.54 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info