680250
3
Verklein
Vergroot
Pagina terug
1/33
Pagina verder
Vigor N61
Wireless Adapter
User’s Guide
Version: 1.0
Date: 2007/10/02
Copyright 2007 All rights reserved.
This publication contains information that is protected by copyright. No part may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright
holders. The scope of delivery and other details are subject to change without prior notice.
Microsoft is a registered trademark of Microsoft Corp.
Windows, Windows 95, 98, Me, NT, 2000, XP and Explorer are trademarks of Microsoft Corp.
Apple and Mac OS are registered trademarks of Apple Computer Inc.
Other products may be trademarks or registered trademarks of their respective manufacturers.
Please visit www.draytek.com to get the newly updated manual at any time.
Vigor N61 User’s Guide
ii
This page is left blank.
Vigor N61 User’s Guide
iii
T
T
a
a
b
b
l
l
e
e
o
o
f
f
C
C
o
o
n
n
t
t
e
e
n
n
t
t
s
s
1
Preface ...............................................................................................................5
Wireless LAN Basics..................................................................................................................... 5
Warning...................................................................................................................................... 5
2
Installation Overview.........................................................................................7
Introduction ................................................................................................................................... 7
Installation Procedure ................................................................................................................... 7
Uninstalling USB Driver............................................................................................................... 12
3
Configuration...................................................................................................15
Wireless USB Adapter Utility....................................................................................................... 15
Configuration............................................................................................................................... 16
Status .......................................................................................................................................... 24
Option.......................................................................................................................................... 25
About........................................................................................................................................... 27
4
Miscellaneous..................................................................................................29
Windows Zero Configuration....................................................................................................... 29
Vigor N61 User’s Guide
iv
This page is left blank.
Vigor N61 User’s Guide
5
1
P
P
r
r
e
e
f
f
a
a
c
c
e
e
Thank you for purchasing Wireless LAN Adapter. This manual will assist you with the
installation procedure and is valid for Wireless LAN adapters.
W
W
i
i
r
r
e
e
l
l
e
e
s
s
s
s
L
L
A
A
N
N
B
B
a
a
s
s
i
i
c
c
s
s
Wireless LAN (Local Area Networks) systems offer a great number of advantages
over a traditional, wired system. Wireless LANs (WLANs) are more flexible, easier to
setup and manage and often more cost effective than their wired equivalence.
Using radio frequency (RF) technology, WLANs transmit and receive data over the air,
minimizing the need for wired connections. Thus, WLANs combine data connectivity
with user mobility, and, through simplified configuration, enable movable LANs.
With wireless LANs, users can access shared information without looking for a place
to plug in and network managers can set up or augment networks without installing or
moving wires. Wireless LANs offer the following productivity, convenience and cost
advantages over traditional wired networks:
y Mobility - Wireless LAN systems can provide LAN users with access to real-time
information anywhere in their organization. This mobility supports productivity
and service opportunities not possible with wired networks.
y Installation Speed and Simplicity - Installing a wireless LAN system can be fast
and easy and can eliminate the need to pull cable through walls and ceilings.
y Installation Flexibility - Wireless technology allows the network to go where
wires cannot go.
y Reduced Cost-of-Ownership - While the initial investment required for wireless
LAN hardware might be higher than the cost of wired LAN hardware, overall
installation expenses and life-cycle costs will be significantly lower. Long-term
cost benefits are greatest in dynamic environments requiring frequent moves,
adds, and changes.
y Scalability - Wireless LAN systems can be configured in a variety of topologies
to meet the needs of specific applications and installations. Configurations are
easily changed and range from peer-to-peer to full infrastructure networks, also
allow roaming over a broad area.
W
W
a
a
r
r
n
n
i
i
n
n
g
g
y Compatibility with IEEE 802.11n future version is not guaranteed.
y Compatibility with IEEE 802.11n draft devices from other manufacturer is not
guaranteed.
Vigor N61 User’s Guide
6
This page is left blank.
Vigor N61 User’s Guide
7
2
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
O
O
v
v
e
e
r
r
v
v
i
i
e
e
w
w
I
I
n
n
t
t
r
r
o
o
d
d
u
u
c
c
t
t
i
i
o
o
n
n
Before installing Vigor N61, make sure that there is already an Access Point existed on the
wireless network. It is needed in case of Infrastructure network mode.
Here are some steps you will perform in establishing your wireless network
connection:
y Install the USB Driver for Vigor N61 by using the Install CD.
y Install the Wireless card.
y Configure network protocol(s) that is required to communicate on your network. Most
likely you will need the TCP/IP protocol.
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
P
P
r
r
o
o
c
c
e
e
d
d
u
u
r
r
e
e
Important !!
Before you installing USB driver for Vigor N61, do not insert the
wireless adapter in your computer.
Follow the step below to install USB driver.
1. Insert the CD into your computer. The following screen will appear.
Vigor N61 User’s Guide
8
2. The setup wizard will appear as follows. Please click Next.
3. Now, you can insert Vigor N61 to the USB port of your computer. Then click Next.
Connect with USB cable
Connect directly
Vigor N61 User’s Guide
9
4. In this page, you have to choose “I accept…” to continue the installation. If you do not
accept the agreement, you can click “I do not…” to exit the wizard. And the driver
installation will not be installed to your computer.
5. There are two types of setup that you have to choose, Complete or Install Driver Only.
If you do not know which one is proper, simply choose Complete and click Next.
Vigor N61 User’s Guide
10
6. The default destination folder will be specified in this page. Also, you can click Browse...
to choose another folder for storing the driver. Click Next.
7. A default program folder will be offered by the setup program. If you do not want to
change it, simply click Next.
Vigor N61 User’s Guide
11
8. The setup program is executing the installation by copying corresponding files to your
computer.
9. Now the system will ask you to restart your computer to complete the whole installation.
After choosing the proper setting, please click Finish.
10. After restarting your system, the system will find out the hardware (wireless LAN card)
automatically. When it locates, a message will be shown on the system tray.
11. Now, you can find the N61 utility icon in the system tray. Double click it to open the
configuration window of Vigor N61 wireless adapter.
Vigor N61 User’s Guide
12
U
U
n
n
i
i
n
n
s
s
t
t
a
a
l
l
l
l
i
i
n
n
g
g
U
U
S
S
B
B
D
D
r
r
i
i
v
v
e
e
r
r
If you want to remove the driver for this wireless card, please do the following:
1. Run Start >> Programs>> Vigor N61 802.11n Wireless USB Adapter
Utility>>Uninstall.
2. The Preparing Setup will appear.
3. When the following screen appears, please click OK.
4. Now, the system starts to remove the corresponding files.
Vigor N61 User’s Guide
13
5. When the following dialog appears, please click Finish.
Vigor N61 User’s Guide
14
This page is left blank
Vigor N61 User’s Guide
15
3
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
W
W
i
i
r
r
e
e
l
l
e
e
s
s
s
s
U
U
S
S
B
B
A
A
d
d
a
a
p
p
t
t
e
e
r
r
U
U
t
t
i
i
l
l
i
i
t
t
y
y
After finish the driver installation, it is the time to configure the wireless utility for accessing
into Internet through wireless connection. Double click on the N61 utility icon on the system
tray. Or open the wireless monitor utility by clicking Start >> Programs>> USB Wireless
LAN Card >>802.11g USB Wireless LAN Card Utility.
The Wireless USB Adapter Utility window will appear as the following. Basically, the
software will scan and display available wireless AP automatically.
This chapter will introduce each tab in detail. Also, an example of configuration will
be provided for your reference.
Vigor N61 User’s Guide
16
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
The wireless USB adapter utility will find out all the available Access Points and list them
automatically for you to choose. The following figure is just an example. The real available
list depends on the AP(s) that found around your computer system.
In the field of Available WLANs, you can see:
SSID It displays the SSID of the AP.
means the AP is ready for you to connect
means connecting to that AP successfully
means connection is failed.
It the available APs are many, scroll bars will appear for the
user to scroll and select preferred AP. Please select the one
(Access Point) that you want to connect for accessing Internet.
MAC (BSSID) It means the MAC address of current wireless card.
Signal The more the percentage is, the better the link quality will be.
Security It displays security method that the AP used.
CH It displays the connection channel that the AP used.
Refresh It can re-search available APs on wireless network whenever
the user clicks it. By the way, the whole list will be refreshed in
a certain time automatically.
Connect It starts to build a connection between the station (client) and
the AP.
Vigor N61 User’s Guide
17
In the field of Profile Group Control, you can see:
New It allows you to add a new profile to group several APs.
Click New to open the following dialog box. Type a new name
in the box and click OK.
The new group with the name you typed will be shown as the
following.
Rename It allows you to modify the selected profile name.
Delete It allows you to delete the selected profile.
Select It allows you to select one profile for use.
Vigor N61 User’s Guide
18
In the field of Preferred WLANs, you can see:
SSID It displays the SSID of the AP.
Security It displays security method that the AP used.
New It allows you to add a new profile.
Move to It allows you to move a selected profile to another profile group.
After click this button, the following dialog will appear for you
to assign which group that you want to move to.
Remove It allows you to select one of the existed profiles and click this
button to remove it.
Export It allows you to save the profile record as a file with file format
of .AWP. Please type the required password as shown in the
following dialog.
Properties It displays properties of current connected AP.
For the detailed information, refer to “To add a new WLAN
AP…” below.
Import It allows you to load a pre-saved profile record into current
connected AP. When you want to import such profile, you have
to type the correct password for that AWP file.
Re-Connect It allows you to select one of the existed profiles for applying
with current connected Access Point.
To add a new WLAN AP, please click New to open the following dialog.
Vigor N61 User’s Guide
19
Different authentication mode will guide different data encryption, key length, default key and
so on.
Wireless network name
(SSID)
Please type the name for the AP or wireless router you want to
connect.
Authentication Mode There are six modes provided for you to choose for data
encryption in connection.
Data Encryption It will be different according to the Authentication Mode you
choose.
For Open System/Shared Key and Open System, the data
encryption can be disabled or assigned with WEP.
For Shared, WPA, WPA-PSK, WPA2 and WPA2_PSK, the
data encryption can be TKIP or AES. You have to choose the
one which is the same with the setting configured in AP that
you want to connect.
Vigor N61 User’s Guide
20
Key Length Choose the key length for the wireless card. The method you
choose here must be the same as the method set in the
connected AP.
The number you typed here should be the same as the number
set in the connected AP. According to the input method you
selected, the characters that you have to set will differ.
For 10/26 Hexadecimal digits: Type 10/26 hexadecimal
numbers in this field.
For 5/13 ASCII digits: Type 5/13 ASCII characters in this
field.
Default Key Specify the one which is the same as the setting in the
connected AP.
Enable 802.1X It will be available when you choose Open System.
Authentication Config Such button will be available after you check Enable 802.1X.
You have to type the same parameters as set in the connected
AP. Otherwise the connection will not be successful.
Vigor N61 User’s Guide
21
WPA Passphrase - Type the password for authentication with
AP while using WPA PSK mode.
Check Passphrase - Check this box to make the characters of
passwords being visible.
EAP Type - A type for authentication between station and
radius server while executing 802.1X mode. For some EAP
types, you have to choose a sub-item from the drop down menu
on its right side for using together. Refer to the following
sample graphics.
User Certificate – The radius server will assign a user
certificate for users. Type the characters in this box.
Validate Server Certificate - Check this box to validate the
server certificate for radius server.
User Name - Type the certificate account for radius server.
Domain Name - Type the domain name for the radius server.
Password – Type the password for connection with WPA-PSK
mode.
Confirm Password - Type the password again to confirm it.
TTLS Identify – Type the TTLS ID for the radius server.
Add – You can add a trust CA server by clicking Add. The
following dialog will appear for you to enter a new name.
Remove – For the CA server which is useless, please select that
one from Trust CA List and click this button to delete it.
IP & Proxy Setting This setting allows you to set IP and proxy. Please click this
button to open the following window.
Vigor N61 User’s Guide
22
Obtain an IP address automatically – Check this button to get
IP address automatically for such wireless card. If you do not
check this button, you have to type IP address, subnet mask and
default gateway manually.
IP Address – Type the LAN IP address for the wireless card.
Subnet mask – Type the subnet mask for the wireless card.
Default gateway – Type the default gateway for the wireless
card.
Obtain DNS server address automatically - Check this button
to get DNS server address automatically for such device. If you
do not check this button, you have to type Preferred DNS server
address and Alternative DNS server manually.
Preferred DNS server – Type the address for primary DNS
server.
Alternate DNS server – Type the address for secondary DNS
server.
Primary WINS - Type the IP address for primary WINS.
Secondary WINS - Type the IP address for secondary WINS.
To set proxy setting, click ProxySetting tab to display the
following window:
Vigor N61 User’s Guide
23
Automatically detect settings – Check this box to let the
system detect proxy settings automatically.
Use automatic configuration script – Check this box to use
the configuration script automatically according to the IP
address typed below.
Address - Type the LAN IP address to get the configuration
information for proxy.
Use a proxy server for LAN – Check this box to make the
proxy server being used in LAN.
Bypass proxy server for local address – The proxy server will
not be used for local address if you check this box.
HTTP/Port – Type proxy IP and port number used for HTTP.
Use the same proxy server for all protocols - Check this box
to make all the protocols to use same proxy server.
Secure/Port – Type proxy IP and port number for secure.
FTP/Port - Type proxy IP and port number for FTP.
Gopher/Port – Type proxy IP and port number for Gopher.
Socks/Port - Type proxy IP and port number for Socks.
Do not use proxy server for address beginning with - Type
the heading of IP address that you do not want to use as a proxy
server.
Vigor N61 User’s Guide
24
S
S
t
t
a
a
t
t
u
u
s
s
This page provides connection status and hardware information for the device. Simply click
Status tab on the Wireless USB Adapter window.
Connection Status It displays current status of connection.
SSID It displays the SSID of the AP that your computer connected.
BSSID It displays the MAC address for current device.
Network Type It displays the mode (Infrastructure or Ad-Hoc) that you set for
connecting to AP.
Frequency It displays the frequency that this wireless card. used.
Channel It displays the channel used for this wireless card.
Data Encryption It displays the encryption way for authentication mode used for
this wireless card.
Speed It displays current transferring rate for the link.
Authentication State It displays the encryption status for connection.
Signal Strength The longer the red bar for signal strength is, the better the
connection effect will be. The graph is active only when you
choose Access Point as the network type.
MAC Address It displays the MAC address for AP or wireless router that station
connected.
Regulatory Domain It displays Regulatory Domain for different areas. For example, it
will display ETSI (CH1~CH13) for nations in Europe, display
FCC(CH1~CH11) for USA, etc.
Radio Status It displays On or Off status for this wireless card.
Vigor N61 User’s Guide
25
O
O
p
p
t
t
i
i
o
o
n
n
Simply click Option tab on the Wireless USB Adapter window.
Auto launch when
Windows start up
Check this button to launch the wireless connection when
Windows starts up. If you do not check this box, you can launch
wireless connection manually.
Remember mini status
position
Remember and fix the position of mini status dialog.
Auto hide mini status
Check this button to hide the mini status icon which appears on
the right bottom of the desktop.
Set mini status always
on top
Check this button to make the mini status icon to be displayed
on the top of the desktop.
Enable IP Setting and
Proxy Setting in Profile
Check this box to enable IP setting and Proxy Setting in profile.
Refer to IP & Proxy Setting on page 20 for more information.
Group Roaming
You can configure several groups with different APs. The
wireless card allows the station to be roamed among different
groups of APs. Simply check this box to have group roaming.
Infrastructure and
Ad-hoc network
Infrastructure and Ad-hoc network are the common two types
for connection through wireless LAN. Click this radio button to
make the system selecting suitable type for your device.
Infrastructure network
only
Click this button to use infrastructure network only.
Ad-hoc network only
Click this button to use ad-hoc network only.
Automatically connect
to non-preferred
networks
Check this box to let your wireless card connect to any
non-preferred networks if the network you want to connect is
failed.
Disable Radio
Check this button to close the connection function of this
Vigor N61 User’s Guide
26
wireless card.
Fragmentation
Threshold
Set the value for fragmentation threshold. The default value is
2346.
RTS Threshold
Set the value for RTS threshold. The default value is 2347.
Frequency
Please choose the wireless frequency for this card.
Ad-hoc Channel
Please choose one channel. It must match the channel set in AP.
Power Save Mode
To save the power, you can choose Max Save or Fast Save. The
default setting is Disable.
MaxSave – It can save lots of power. However, the wireless
signal also is bad.
FastSave- It is standard mode for power saving.
Disable – The power will not be saved. However, the wireless
signal will be better.
Tx Burst
Such function can increase the data transmission rate within a
short time. Choose Enable to activate the function, otherwise,
choose Disable to close the function.
Vigor N61 User’s Guide
27
A
A
b
b
o
o
u
u
t
t
This page provides software information such as utility version and driver versions. Simply
click About tab on the Wireless USB Adapter window.
Utility Version It displays the version number of this utility.
Driver Version It displays the driver version of this wireless card.
Vigor N61 User’s Guide
28
This page is left blank
Vigor N61 User’s Guide
30
2. Next, the following window will appear.
3. Click Change Advanced Settings and the following window will be shown. Press the
Wireless Networks tab.
Vigor N61 User’s Guide
31
4. Click Add to open next window. In this window, type the SSID of the AP that you want to
connect with the wireless card. Here, Tom is entered as an example. And choose
WPA-PSK as the Network Authentication and TKIP as the Data encryption. Then, type
the encryption key characters.
The type for Network Authentication, Data encryption and key must be the same values as
configured in the AP that you want to connect.
Vigor N61 User’s Guide
32
5. Press the Authentication tab. Choose the EAP type which is the same as configured in the
AP.
6. After click OK, the wireless station can associate with the AP.
7. Open Wireless Connection window. Please choose “Tom” (as an example) and click
Connect.
Vigor N61 User’s Guide
33
8. The wireless connection starts. Please wait for it completes.
9. The wireless connection has been established.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Draytek Vigor N61 Wireless Adapter bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Draytek Vigor N61 Wireless Adapter in de taal/talen: Engels als bijlage per email.

De handleiding is 0,73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info