680225

Draytek Vigor 2960 series Handleiding

655
Verklein
Vergroot
Pagina terug
1/677
Pagina verder
Vigor2960 Series User’s Guide
ii
Vigor2960
Dual-WAN Security Firewall
User’s Guide
Version: 2.6
Firmware Version: V1.4.0
(For future update, please visit DrayTek web site for further information)
Date: May 17, 2018
Vigor2960 Series User’s Guide
iii
Intellectual Property Rights (IPR) Information
Copyrights
© All rights reserved. This publication contains information that is protected by
copyright. No part may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language without written permission from the copyright
holders.
Trademarks
The following trademarks are used in this document:
Microsoft is a registered trademark of Microsoft Corp.
Windows, Windows 95, 98, Me, NT, 2000, XP, Vista, 7, 8 and Explorer are
trademarks of Microsoft Corp.
Apple and Mac OS are registered trademarks of Apple Inc.
Other products may be trademarks or registered trademarks of their respective
manufacturers.
Safety Instructions and Approval
Safety
Instructions
Read the installation guide thoroughly before you set up the router.
The router is a complicated electronic unit that may be repaired only be
authorized and qualified personnel. Do not try to open or repair the router
yourself.
Do not place the router in a damp or humid place, e.g. a bathroom.
The router should be used in a sheltered area, within a temperature range of +5 to
+40 Celsius.
Do not expose the router to direct sunlight or other heat sources. The housing and
electronic components may be damaged by direct sunlight or heat sources.
Do not deploy the cable for LAN connection outdoor to prevent electronic shock
hazards.
Keep the package out of reach of children.
When you want to dispose of the router, please follow local regulations on
conservation of the environment.
Warranty
We warrant to the original end user (purchaser) that the router will be free from any
defects in workmanship or materials for a period of two (2) years from the date of
purchase from the dealer. Please keep your purchase receipt in a safe place as it serves
as proof of date of purchase. During the warranty period, and upon proof of purchase,
should the product have indications of failure due to faulty workmanship and/or
materials, we will, at our discretion, repair or replace the defective products or
components, without charge for either parts or labor, to whatever extent we deem
necessary tore-store the product to proper operating condition. Any replacement will
consist of a new or re-manufactured functionally equivalent product of equal value, and
will be offered solely at our discretion. This warranty will not apply if the product is
modified, misused, tampered with, damaged by an act of God, or subjected to abnormal
working conditions. The warranty does not cover the bundled or licensed software of
other vendors. Defects which do not significantly affect the usability of the product will
not be covered by the warranty. We reserve the right to revise the manual and online
documentation and to make changes from time to time in the contents hereof without
obligation to notify any person of such revision or changes.
Be a Registered
Owner
Web registration is preferred. You can register your Vigor router via
http://www.draytek.com.
Firmware & Tools
Updates
Due to the continuous evolution of DrayTek technology, all routers will be regularly
upgraded. Please consult the DrayTek web site for more information on newest
firmware, tools and documents.
http://www.draytek.com
Vigor2960 Series User’s Guide
iv
Vigor2960 Series User’s Guide
v
Table of Contents
Chapter 1: Introduction.....................................................................................................1
1.1 Web Configuration Buttons Explanation ...................................................................................... 1
1.2 LED Indicators and Connectors ................................................................................................... 2
1.3 Hardware Installation.................................................................................................................... 4
1.3.1 Network Connection ................................................................................................................4
1.3.2 Wall-Mounted Installation ........................................................................................................5
Chapter 2: Initial Configuration ........................................................................................7
2.1 Changing Password..................................................................................................................... 7
2.2 Quick Start Wizard........................................................................................................................ 9
2.2.1 Step 1 – Specifying the WAN Profile.......................................................................................9
2.2.2 Step 2 – Configuring the Selected Protocol.............................................................................9
2.3 Register Vigor Router................................................................................................................. 17
Chapter 3: Application and Tutorial................................................................................19
3.1 How to Build SSL VPN with RDP Service in the Browser via Logging in Router's HTTPS Server?
.......................................................................................................................................................... 19
3.2 How to Configure OSPF?........................................................................................................... 24
3.3 How to Configure LAN to LAN IPsec Tunnel between Vigor2960 and Other Router ................ 31
3.4 CVM Application - How to manage the CPE (router) through Vigor2960?................................ 34
3.5 CVM Application - How to build the VPN between remote devices and Vigor2960? ................ 39
3.6 CVM Application - How to upgrade CPE firmware through Vigor2960?.................................... 42
3.7 How to use High Availability for Vigor routers?.......................................................................... 48
3.8 How to Configure DNS Inbound Load Balance on Vigor 2960?................................................ 53
Chapter 4: Advanced Configuration...............................................................................57
4.1 WAN ........................................................................................................................................... 57
4.1.1 General Setup........................................................................................................................58
4.1.2 Inbound Load Balance...........................................................................................................80
4.1.3 Switch ...............................................................................................................................86
4.2 LAN ............................................................................................................................................ 90
4.2.1 General Setup........................................................................................................................91
4.2.2 PPPoE Server......................................................................................................................104
4.2.3 Switch .............................................................................................................................109
4.2.4 Bind IP to MAC ....................................................................................................................115
4.2.5 LAN DNS .............................................................................................................................119
4.3 Routing..................................................................................................................................... 123
4.3.1 Load Balance Pool...............................................................................................................123
4.3.2 Static Route .........................................................................................................................127
4.3.3 Policy Route.........................................................................................................................133
4.3.4 Fast Route ...........................................................................................................................150
4.3.5 Default Route.......................................................................................................................152
Vigor2960 Series User’s Guide
vi
4.3.6 RIP Configuration ................................................................................................................153
4.3.7 OSPF Configuration.............................................................................................................155
4.3.8 BGP Configuration...............................................................................................................157
4.4 NAT........................................................................................................................................... 162
4.4.1 Port Redirection...................................................................................................................162
4.4.2 Fast NAT .............................................................................................................................166
4.4.3 Server Load Balance...........................................................................................................170
4.4.4 DMZ Host .............................................................................................................................173
4.4.5 ALG .............................................................................................................................176
4.4.6 Connection Timeout.............................................................................................................177
4.5 Firewall..................................................................................................................................... 178
4.5.1 Filter Setup ..........................................................................................................................178
4.5.2 DoS Defense .......................................................................................................................201
4.5.3 MAC Block...........................................................................................................................205
4.5.4 Filter Counter.......................................................................................................................207
4.6 Objects Setting......................................................................................................................... 208
4.6.1 IP Object .............................................................................................................................209
4.6.2 IP Group .............................................................................................................................211
4.6.3 IPv6 Object ..........................................................................................................................213
4.6.4 MAC / Vendor Object...........................................................................................................215
4.6.5 Country Object.....................................................................................................................217
4.6.6 Service Type Object ............................................................................................................219
4.6.7 Service Type Group.............................................................................................................221
4.6.8 Keyword /DNS Object..........................................................................................................223
4.6.9 File Extension Object...........................................................................................................226
4.6.10 APP Object ........................................................................................................................229
4.6.11 Web Category Object ........................................................................................................233
4.6.12 QQ Object..........................................................................................................................237
4.6.13 QQ Group ..........................................................................................................................239
4.6.14 Time Object .......................................................................................................................241
4.6.15 Time Group........................................................................................................................243
4.6.16 SMS Service Object...........................................................................................................245
4.6.17 Mail Service Object............................................................................................................247
4.6.18 Notification Object..............................................................................................................250
4.7 User Management.................................................................................................................... 253
4.7.1 Web Portal...........................................................................................................................253
4.7.2 User Profile..........................................................................................................................260
4.7.3 User Group ..........................................................................................................................273
4.7.4 Guest Profile........................................................................................................................275
4.7.5 RADIUS .............................................................................................................................281
4.7.6 LDAP/Active Directory .........................................................................................................283
4.8 Application................................................................................................................................ 286
4.8.1 Dynamic DNS ......................................................................................................................286
4.8.2 DNS Security .......................................................................................................................292
4.8.3 GVRP .............................................................................................................................293
4.8.4 IGMP Proxy .........................................................................................................................294
4.8.5 UPnP .............................................................................................................................295
4.8.6 High Availability ...................................................................................................................296
4.8.7 Wake on LAN.......................................................................................................................305
4.8.8 SMS / Mail Alert Service......................................................................................................308
4.9 VPN and Remote Access......................................................................................................... 312
4.9.1 VPN Client Wizard...............................................................................................................312
4.9.2 VPN Server Wizard..............................................................................................................320
4.9.3 Remote Access Control.......................................................................................................326
Vigor2960 Series User’s Guide
vii
4.9.4 PPP General Setup .............................................................................................................327
4.9.5 OpenVPN General Setup ....................................................................................................333
4.9.6 IPsec General Setup............................................................................................................335
4.9.7 VPN Profiles ........................................................................................................................336
4.9.8 VPN Trunk Management.....................................................................................................351
4.9.9 Connection Management ....................................................................................................356
4.10 Certificate Management......................................................................................................... 358
4.10.1 Local Certificate.................................................................................................................359
4.10.2 Trusted CA Certificate .......................................................................................................364
4.10.3 Remote Certificate.............................................................................................................366
4.11 SSL Proxy............................................................................................................................... 368
4.11.1 SSL Web Proxy .................................................................................................................368
4.11.2 SSL Application .................................................................................................................370
4.11.3 Online User Status.............................................................................................................374
4.12 Bandwidth Management ........................................................................................................ 375
4.12.1 Quality of Service...............................................................................................................375
4.12.2 QoS Rule ...........................................................................................................................379
4.12.3 Sessions Limit....................................................................................................................386
4.12.4 Bandwidth Limit .................................................................................................................389
4.13 USB Application...................................................................................................................... 393
4.13.1 Disk Status.........................................................................................................................393
4.13.2 FTP Server ........................................................................................................................394
4.13.3 SAMBA Server...................................................................................................................395
4.13.4 Printer .............................................................................................................................398
4.13.5 Temperature Sensor..........................................................................................................399
4.13.6 Modem Support List...........................................................................................................401
4.14 System Maintenance.............................................................................................................. 402
4.14.1 TR-069 .............................................................................................................................402
4.14.2 Administrator Password.....................................................................................................405
4.14.3 Configuration Backup ........................................................................................................406
4.14.4 Syslog / Mail Alert..............................................................................................................410
4.14.5 Time and Date ...................................................................................................................413
4.14.6 Access Control...................................................................................................................414
4.14.7 SNMP Setup......................................................................................................................419
4.14.8 Reboot System ..................................................................................................................420
4.14.9 Firmware Upgrade.............................................................................................................424
4.14.10 APP Signature Upgrade ..................................................................................................428
4.14.11 APP Support List .............................................................................................................430
4.15 Diagnostics............................................................................................................................. 431
4.15.1 Routing Table ....................................................................................................................431
4.15.2 ARP Cache Table..............................................................................................................434
4.15.3 DNS Cache Table..............................................................................................................437
4.15.4 DHCP Table.......................................................................................................................438
4.15.5 Session Table....................................................................................................................440
4.15.6 MAC Address Table...........................................................................................................441
4.15.7 Traffic Statistics .................................................................................................................441
4.15.8 Traffic Graph......................................................................................................................443
4.15.9 Web Console .....................................................................................................................445
4.15.10 Ping/Trace Route.............................................................................................................445
4.15.11 Data Flow Monitor............................................................................................................446
4.15.12 User Status......................................................................................................................449
4.16 Central Management (VPN)................................................................................................... 450
4.16.1 General Setup....................................................................................................................450
Vigor2960 Series User’s Guide
viii
4.16.2 CPE Management .............................................................................................................453
4.16.3 Log/Alert ............................................................................................................................462
4.17 Central Management (AP) ..................................................................................................... 463
4.17.1 General Setup....................................................................................................................465
4.17.2 Dashboard .........................................................................................................................466
4.17.3 Status .............................................................................................................................466
4.17.4 WLAN Profile .....................................................................................................................468
4.17.5 AP Maintenance ................................................................................................................472
4.17.6 AP Map .............................................................................................................................473
4.17.7 Traffic Graph......................................................................................................................476
4.17.8 Rogue AP ..........................................................................................................................477
4.17.9 Event Log...........................................................................................................................479
4.17.10 Total Traffic......................................................................................................................480
4.17.11 Station Number................................................................................................................480
4.17.12 Load Balance...................................................................................................................481
4.17.13 Function Support List.......................................................................................................483
4.18 Central Management (Switch)................................................................................................ 484
4.18.1 Status .............................................................................................................................484
4.18.2 Profile .............................................................................................................................487
4.18.3 Group .............................................................................................................................491
4.18.4 Maintenance ......................................................................................................................492
4.18.5 Support List........................................................................................................................493
4.19 External Devices .................................................................................................................... 493
4.20 Product Registration............................................................................................................... 494
Chapter 5: Trouble Shooting.........................................................................................495
5.1 Checking If the Hardware Status Is OK or Not......................................................................... 495
5.2 Checking If the Network Connection Settings on Your Computer Is OK or Not ...................... 496
5.3 Pinging the Router from Your Computer.................................................................................. 499
5.4 Checking If the ISP Settings are OK or Not............................................................................. 500
5.5 Backing to Factory Default Setting If Necessary...................................................................... 501
5.6 Contacting DrayTek.................................................................................................................. 502
Chapter 6: Telnet Commands .......................................................................................503
6.1 Accessing Telnet of Vigor Router ............................................................................................. 503
6.2 Global Commands.................................................................................................................... 505
6.3 Available Configure Commands............................................................................................... 512
6.4 WAN Configuration................................................................................................................... 514
6.4.1 Telnet Command: pf............................................................................................................514
6.4.2 Telnet Command: defaultroute............................................................................................527
6.4.3 Telnet Command: lbpool......................................................................................................528
6.4.4 Telnet Command: autolb .....................................................................................................531
6.4.5 Telnet Command: switch.....................................................................................................532
6.4.6 Telnet Command: 3g...........................................................................................................533
6.5 LAN Configuration.................................................................................................................... 535
6.5.1 Telnet Command: ipbindmac...............................................................................................536
6.5.2 Telnet Command: iprouting .................................................................................................538
6.5.3 Telnet Command: pf............................................................................................................540
Vigor2960 Series User’s Guide
ix
6.5.4 Telnet Command: route.......................................................................................................551
6.5.5 Telnet Command: route6.....................................................................................................554
6.5.6 Telnet Command: switch.....................................................................................................556
6.6 NAT Configuration.................................................................................................................... 557
6.6.1 Telnet Command: port_redirect...........................................................................................558
6.6.2 Telnet Command: dmz ........................................................................................................562
6.7 Objects Setting Configuration .................................................................................................. 566
6.7.1 Telnet Command: fext_object..............................................................................................566
6.7.2 Telnet Command: ip_group.................................................................................................570
6.7.3 Telnet Command: ip_object.................................................................................................572
6.7.4 Telnet Command: keyword_object......................................................................................575
6.7.5 Telnet Command: service_group ........................................................................................577
6.7.6 Telnet Command: service_object........................................................................................578
6.7.7 Telnet Command: time_group.............................................................................................581
6.7.8 Telnet Command: time_object.............................................................................................583
6.7.9 Telnet Command: web_category.........................................................................................586
6.8 User Management Configuration ............................................................................................. 592
6.8.1 Telnet Command: users ......................................................................................................592
6.8.2 Telnet Command: group......................................................................................................599
6.9 Applications Configuration........................................................................................................ 602
6.9.1 Telnet Command: DDNS.....................................................................................................602
6.9.2 Telnet Command: GVRP.....................................................................................................604
6.9.3 Telnet Command: ldap ........................................................................................................605
6.9.4 Telnet Command: ospf ........................................................................................................608
6.9.5 Telnet Command: rip...........................................................................................................609
6.9.6 Telnet Command: SIP ALG.................................................................................................610
6.9.7 Telnet Command: UPnP......................................................................................................610
6.10 VPN Configuration ..................................................................................................................611
6.10.1 Telnet Command: lan2lan .................................................................................................612
6.10.2 Telnet Command: remotedialin .........................................................................................631
6.10.3 Telnet Command: trunk.....................................................................................................634
6.11 Bandwidth Management Configuration .................................................................................. 640
6.11.1 Telenet Command: access_barrier ...................................................................................640
6.11.2 Telenet Command: bandwidth_limit ..................................................................................641
6.11.3 Telenet Command: sesslimit .............................................................................................645
6.12 System Management Configuration....................................................................................... 648
6.12.1 Telnet Command: acc_ctrl.................................................................................................648
6.12.2 Telnet Command: admin_passwd.....................................................................................652
6.12.3 Telnet Command: autodiscovery.......................................................................................652
6.12.4 Telnet Command: cc..........................................................................................................652
6.12.5 Telnet Command: cmm .....................................................................................................653
6.12.6 Telnet Command: config ...................................................................................................654
6.12.7 Telnet Command: firmware ...............................................................................................658
6.12.8 Telnet Command: mailalert ...............................................................................................659
6.12.9 Telnet Command: ntpclient................................................................................................660
6.12.10 Telnet Command: reboot.................................................................................................662
6.12.11 Telnet Command: snmpagent .........................................................................................662
6.12.12 Telnet Command: syslogd...............................................................................................663
6.12.13 Telnet Command: tr069...................................................................................................665
Vigor2960 Series User’s Guide
1
C
C
h
h
a
a
p
p
t
t
e
e
r
r
1
1
:
:
I
I
n
n
t
t
r
r
o
o
d
d
u
u
c
c
t
t
i
i
o
o
n
n
The Vigor2960 Series integrates a rich suite of functions, including NAT, firewall, VPN,
load balance, and bandwidth management capability. These products are very suitable for
providing multi-integrated solutions to SME markets.
A Virtual Private Network (VPN) is an extension of a private network that encompasses
links across shared or public networks like an Intranet. A VPN enables you to send data
between two computers across a shared public Internet network in a manner that emulates
the properties of a point-to-point private link. The DrayTek Vigor2960 Series VPN router
supports Internet-industry standards technology to provide customers with open,
interoperable VPN solutions such as X.509, DHCP over Internet Protocol Security (IPsec)
up to 500 tunnels, and Point-to-Point Tunneling Protocol (PPTP).
1
1
.
.
1
1
W
W
e
e
b
b
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
B
B
u
u
t
t
t
t
o
o
n
n
s
s
E
E
x
x
p
p
l
l
a
a
n
n
a
a
t
t
i
i
o
o
n
n
Several main buttons appeared on the web pages are defined as the following:
Save and apply current settings.
Cancel current settings and recover to the previous saved settings, or
discard the settings configured in the page.
Go to next page.
Return to the previous page.
Complete the setting configuration.
Remove the setting if you are not satisfied with it.
Remove the selected entry.
Vigor2960 Series User’s Guide
2
Note: For the other buttons shown on the web pages, please refer to Chapter 4 for detailed
explanation.
1
1
.
.
2
2
L
L
E
E
D
D
I
I
n
n
d
d
i
i
c
c
a
a
t
t
o
o
r
r
s
s
a
a
n
n
d
d
C
C
o
o
n
n
n
n
e
e
c
c
t
t
o
o
r
r
s
s
Before you use the Vigor router, please get acquainted with the LED indicators and connectors first.
The displays of LED indicators and connectors for the routers are different slightly.
D
D
e
e
s
s
c
c
r
r
i
i
p
p
t
t
i
i
o
o
n
n
f
f
o
o
r
r
L
L
E
E
D
D
LED Status Explanation
Blinking The router is powered on and running
normally.
ACT (Activity)
Off The router is powered off.
CSM On The profile(s) of CSM (Content Security
Management) for IM/P2P, URL/Web Content
Filter application can be created and enabled
from Firewall >>Filter Setup.
On The VPN tunnel is active. VPN
Off No VPN tunnel is active.
On The DoS/DDoS function is active. DoS
Blinking It will blink while deleting an attack.
On The WAN1 or WAN2 connection is ready. WAN1/2
Blinking It will blink while transmitting data.
On The QoS function is active.
QoS
Off The QoS function is disabled.
On The USB device is connected and ready for
use.
USB1/2
Blinking The data is transmitting.
LED on Connector
On The port is connected.
Off The port is disconnected.
Left LED
(Green)
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
GigaWAN 1/2
Right LED
(Green)
Off The port is connected with 10/100Mbps.
On The port is connected.
Off The port is disconnected.
Left LED
(Green)
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
GigaLAN
1/2/3/4
Right LED
(Green)
Off The port is connected with 10/100Mbps.
Vigor2960 Series User’s Guide
3
C
C
o
o
n
n
n
n
e
e
c
c
t
t
o
o
r
r
s
s
Interface Description
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is
blinking). Press the hole and keep for more than 5 seconds. When you
see the ACT LED begins to blink rapidly than usual, release the button.
Then the router will restart with the factory default configuration.
GigaWAN 1/2 Connecters for remote networked devices.
GigaLAN 1/2/3/4 Connecters for local networked devices.
USB1/2 Connecter for Mobile HDD, 3G Modem or printer.
Connecter for a power cord.
ON/OFF - Power switch.
Vigor2960 Series User’s Guide
4
1
1
.
.
3
3
H
H
a
a
r
r
d
d
w
w
a
a
r
r
e
e
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
1
1
.
.
3
3
.
.
1
1
N
N
e
e
t
t
w
w
o
o
r
r
k
k
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
o
o
n
n
Before starting to configure the router, you have to connect your devices correctly.
1. Connect one end of an Ethernet cable (RJ-45) to one of the LAN ports of Vigor2960s.
2. Connect the other end of the cable (RJ-45) to the Ethernet port on your computer (that
device also can connect to other computers to form a small area network). The LAN
LED for that port on the front panel will light up.
3. Connect the cable Modem/DSL Modem/Media Converter to any WAN port of router
with Ethernet cable (RJ-45).
4. Connect the power cord to Vigor2960’s power port on the rear panel, and the other side
into a wall outlet.
5. Power on the device by pressing down the power switch on the rear panel. The PWR
LED should be ON.
6. The system starts to initiate. After completing the system test, the ACT LED will light
up and start blinking.
Below shows an outline of the hardware installation for your reference.
Vigor2960 Series User’s Guide
5
1
1
.
.
3
3
.
.
2
2
W
W
a
a
l
l
l
l
-
-
M
M
o
o
u
u
n
n
t
t
e
e
d
d
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
The Vigor2960 Series can be mounted on the wall by using standard brackets shown below.
Choose a flat surface (on the wall) which is suitable for placing the router. Make the screw
holes on the short side of the bracket aim at the screw holes on the router. Next, fasten both
the bracket and the router with two screws; and fasten both the wall and the bracket with
another two screws. Refer to the following figure.
Then, continue to fasten the screws on the other side of the router and the wall with other
screws.
When you finished about procedure, the router has been mounted on the wall firmly.
Vigor2960 Series User’s Guide
6
This page is left blank.
Vigor2960 Series User’s Guide
7
C
C
h
h
a
a
p
p
t
t
e
e
r
r
2
2
:
:
I
I
n
n
i
i
t
t
i
i
a
a
l
l
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
For use the router properly, it is necessary for you to change the password of web
configuration for security and adjust primary basic settings.
This chapter explains how to setup a password for an administrator and how to adjust basic
settings for accessing Internet successfully. Be aware that only the administrator can change
the router configuration.
2
2
.
.
1
1
C
C
h
h
a
a
n
n
g
g
i
i
n
n
g
g
P
P
a
a
s
s
s
s
w
w
o
o
r
r
d
d
To change the password for this device, you have to access into the web browse with default
password first.
1. Make sure your computer connects to the router correctly.
Notice: You may either simply set up your computer to get IP
dynamically from the router or set up the IP address of the computer to be
the same subnet as the default IP address of Vigor router 192.168.1.1.
For the detailed information, please refer to the later section - Trouble
Shooting of this guide.
2. Open a web browser on your PC and type http://192.168.1.1. A pop-up window will
open to ask for username and password. Please type default values on the window for
the first time accessing. The default value for user name is admin and the password is
admin. Next, click Login.
Vigor2960 Series User’s Guide
8
3. Now, the Main Screen will pop up.
4. Go to System Maintenance page and choose Administrator Password.
5. Enter the login password (admin, in default) on the field of Original Password. Type a
new one in the field of New Password and retype it on the field of Confirm Password.
Then click Apply to continue.
6. Now, the password has been changed. Next time, use the new password to access the
Web User Interface for this router.
Vigor2960 Series User’s Guide
9
2
2
.
.
2
2
Q
Q
u
u
i
i
c
c
k
k
S
S
t
t
a
a
r
r
t
t
W
W
i
i
z
z
a
a
r
r
d
d
Quick Start Wizard is a wizard which is designed for configuring your router accessing
Internet with simply steps. In the Quick Start Wizard group, you can configure the router to
access the Internet with different modes such as Static, DHCP, PPPoE, or PPTP modes.
For most users, Internet access is the primary application. The router supports the Ethernet
WAN interface for Internet access.
Click Quick Start Wizard from the home page. Quick Start Wizard will guide the user to
establish LAN interface profile, WAN interface profile and select proper protocol for
connection. The following will explain in more detail for the various broadband access
configurations.
2
2
.
.
2
2
.
.
1
1
S
S
t
t
e
e
p
p
1
1
–
–
S
S
p
p
e
e
c
c
i
i
f
f
y
y
i
i
n
n
g
g
t
t
h
h
e
e
W
W
A
A
N
N
P
P
r
r
o
o
f
f
i
i
l
l
e
e
In the first page of Quick Start Wizard, please choose a WAN profile and specify IPv4
protocol.
Available parameters are listed as follows:
Item Description
Profile
Use the drop down list to choose one of the WAN profiles
for modifying.
IPv4 Protocol
Use the drop down list to choose the type for the IPv4
protocol for such profile.
Vigor2960 Series User’s Guide
10
When you finish the above settings, please click Next to go to next page.
2
2
.
.
2
2
.
.
2
2
S
S
t
t
e
e
p
p
2
2
–
–
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
i
i
n
n
g
g
t
t
h
h
e
e
S
S
e
e
l
l
e
e
c
c
t
t
e
e
d
d
P
P
r
r
o
o
t
t
o
o
c
c
o
o
l
l
This page will be changed according to the IPv4 Protocol Type selected on last page.
I
I
f
f
S
S
t
t
a
a
t
t
i
i
c
c
i
i
s
s
s
s
e
e
l
l
e
e
c
c
t
t
e
e
d
d
If Static is selected, the following screen will appear. You can manually assign a static IP
address to the WAN interface and complete the configuration by applying the settings and
rebooting your router. Please type in values for Static IP address, Static Mask, Static
Gateway and Static DNS specified by your ISP, and then click Next.
Available parameters are listed as follows:
Item Description
IP Address
Type a public IP address for such WAN profile.
Subnet Mask
Choose the static mask from the drop down list.
Gateway IP Address
Type a public gateway address for such WAN profile.
DNS Server IP
Address
Add – Click this button to display the IP address field for
adding a new IP address. Type the IP address on the tiny boxes
one by one.
Vigor2960 Series User’s Guide
11
Save – After finished the IP address configuration, click Save
to save the setting onto the router.
Previous
Click it to return to previous setting page.
Finish
Click it to finish the configuration.
Cancel
Click it to discard the settings configured in this page.
When you finished the above settings, please click Finish.
Vigor2960 Series User’s Guide
12
I
I
f
f
D
D
H
H
C
C
P
P
i
i
s
s
s
s
e
e
l
l
e
e
c
c
t
t
e
e
d
d
DHCP allows a user to obtain an IP address automatically from a DHCP server on the
Internet. If you choose DHCP mode, the DHCP server of your ISP will assign a dynamic IP
address for Vigor2960 automatically. It is not necessary for you to assign any setting. (Host
Name is required for some ISPs).
Available parameters are listed as follows:
Item Description
Host Name (Optional)
Type a name as the host name for identification.
Previous
Click it to return to previous setting page.
Finish
Click it to finish the configuration.
Cancel
Click it to discard the settings configured in this page.
When you finished the above settings, please click Finish.
I
I
f
f
P
P
P
P
P
P
o
o
E
E
i
i
s
s
s
s
e
e
l
l
e
e
c
c
t
t
e
e
d
d
PPPoE stands for Point-to-Point Protocol over Ethernet. It relies on two widely accepted
standards: PPP and Ethernet. It connects users through an Ethernet to the Internet with a
common broadband medium, such as a single DSL line, wireless device or cable modem. All
the users over the Ethernet can share a common connection.
PPPoE is used for most of DSL modem users. All local users can share one PPPoE
connection for accessing the Internet. Your service provider will provide you information
about user name, password, and authentication mode.
If your ISP provides you the PPPoE (Point-to-Point Protocol over Ethernet) connection,
please select PPPoE for this router to get the following page. Enter the username and
password provided by your ISP on the web page.
Vigor2960 Series User’s Guide
13
Available parameters are listed as follows:
Item Description
Username
Type in the username provided by ISP in this field.
Password
Type in the password provided by ISP in this field.
Previous
Click it to return to previous setting page.
Finish
Click it to finish the configuration.
Cancel
Click it to discard the settings configured in this page.
When you finished the above settings, please click Finish.
Vigor2960 Series User’s Guide
14
I
I
f
f
P
P
P
P
T
T
P
P
i
i
s
s
s
s
e
e
l
l
e
e
c
c
t
t
e
e
d
d
This mode lets user get the IP group information by a DSL modem with PPTP service from
ISP. Your service provider will give you user name, password, and authentication mode for a
PPTP setting. Click PPTP as the protocol. Type in all the information that your ISP provides
for this protocol.
If your ISP offers you PPTP (Point-to-Point Tunneling Protocol) mode, please select PPTP
for this router. Next, enter the settings provided by your ISP on the web page.
Available parameters are listed as follows:
Item Description
PPTP Over
Usually ISP dynamically assigns IP address to you each time
you connect to it and request. In some case, your ISP provides
service to always assign you the same IP address whenever you
request. In this case, you can fill in this IP address in the Fixed
IP field. Please contact your ISP before you want to use this
function.
Static – specify the IP address.
DHCP - obtain the IP address automatically.
Vigor2960 Series User’s Guide
15
Server Address
Type a remote IP address of PPTP server.
Username
Type in the username provided by ISP in this field.
Password
Type in the password provided by ISP in this field.
IP Address
Type a public IP address for such WAN profile.
Subnet Mask
Choose the static mask from the drop down list.
Gateway IP Address
Type a public gateway address for such WAN profile.
DNS Server IP
Address
To add a new IP address, simply place the mouse cursor on this
filed. The following dialog will appear.
Add – Click this button to display the IP address field for
adding a new IP address.
Save – After finished the IP address configuration, click Save to
save the setting onto the router.
Previous
Click it to return to previous setting page.
Finish
Click it to finish the configuration.
Cancel
Click it to discard the settings configured in this page.
When you finished the above settings, please click Finish. Later, you can surf the Internet at
any time.
Vigor2960 Series User’s Guide
16
Vigor2960 Series User’s Guide
17
2
2
.
.
3
3
R
R
e
e
g
g
i
i
s
s
t
t
e
e
r
r
V
V
i
i
g
g
o
o
r
r
R
R
o
o
u
u
t
t
e
e
r
r
Please follow the steps below to register the router.
1 Before using such function, please register your router online first. Log into the Web
User Interface of Vigor2960 and click Product Registration.
2 A Login page will be shown on the screen. Please type the account and password that
you created previously. And click Login.
Notice: If you haven’t an accessing account, please create a new one first. Please
read the articles on the Agreement regarding user rights carefully while
creating a user account.
Vigor2960 Series User’s Guide
18
3 The following page will be displayed after you logging in MyVigor. When the
following page appears, please type in Nickname (for the router) and choose the right
registration date from the popup calendar (it appears when you click on the box of
Registration Date). Click Add.
4 When the following page appears, your router information has been added to the
database.
5 After clicking OK, you will see the following page. Your router has been registered to
myvigor website successfully.
Vigor2960 Series User’s Guide
19
C
C
h
h
a
a
p
p
t
t
e
e
r
r
3
3
:
:
A
A
p
p
p
p
l
l
i
i
c
c
a
a
t
t
i
i
o
o
n
n
a
a
n
n
d
d
T
T
u
u
t
t
o
o
r
r
i
i
a
a
l
l
3
3
.
.
1
1
H
H
o
o
w
w
t
t
o
o
B
B
u
u
i
i
l
l
d
d
S
S
S
S
L
L
V
V
P
P
N
N
w
w
i
i
t
t
h
h
R
R
D
D
P
P
S
S
e
e
r
r
v
v
i
i
c
c
e
e
i
i
n
n
t
t
h
h
e
e
B
B
r
r
o
o
w
w
s
s
e
e
r
r
v
v
i
i
a
a
L
L
o
o
g
g
g
g
i
i
n
n
g
g
i
i
n
n
R
R
o
o
u
u
t
t
e
e
r
r
'
'
s
s
H
H
T
T
T
T
P
P
S
S
S
S
e
e
r
r
v
v
e
e
r
r
?
?
Remote Desktop Protocol (RDP) is a protocol designed for secure communications in
networks using Microsoft Terminal Services. An easy way is provided to establish
connection between the router and the RDP Server via any browser.
1. Open the Web User Interfaceof Vigor2960.
2. Enable the HTTPS service from System Maintenance >> Access Control by clicking
Enable for HTTPS Allow and type 443 as the value of HTTPS Port.
Vigor2960 Series User’s Guide
20
3. Open SSL VPN >> SSL Application and click the RDP tab to create a profile named
“Win7”. Type IP address, Port number, and Screen Size based on the actual RDP server
information, then click Apply to save the settings.
4. Open User Management >> User Profile to create a new profile named “7788”. Set
the Password as 7788 and choose the profile of Win7 as SSL Application (RDP).
Click Apply.
5. Logout Vigor2960.
6. Login Vigor2960 HTTPS Server with 7788 for both Username and Password.
Vigor2960 Series User’s Guide
21
7. A screen like the following figure will appear. Simply click the SSL Application link.
8. In the following screen, click Connect for connecting to Win7, the RDP server.
Vigor2960 Series User’s Guide
22
9. After that, you can access into Windows 7 via a browser. Note the message below the
window. In which, TLS means Transport Layer Security.
Vigor2960 Series User’s Guide
23
Troubleshooting
If you have installed Java Runtime Environment edition 6 but still cannot establish the
connection, please make sure you have disabled “Use TLS 1.0” in the Java Control Panel
as figure shown below. Then, try to connect again.
Vigor2960 Series User’s Guide
24
3
3
.
.
2
2
H
H
o
o
w
w
t
t
o
o
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
e
e
O
O
S
S
P
P
F
F
?
?
OSPF (Open Shortest Path First) uses the algorithm of SPF (Shortest Path First) to calculate
the route metric. It is suitable for large network and complicated data exchange. Both
Vigor3900 and Vigor2960 support up to OSPF version 2(only for IPv4).
The autonomous system (AS) used in OSPF indicates the largest entity and can be divided
into several areas. Usually, Area 0 will be used as OSPF backbone which distributing the
routing information among areas.
When you need faster convergence than distance vector, want to support much larger
networks or want to have less susceptible to bad routing information, you can enable OSPF
feature to fit your request. Note that both routers must support OSPF function at the same
time to build the OSPF connection.
In the following example, a PC can go 192.168.2.0/24 and 192.168.4.0/24 without setting
any Static Route. Refer to the OSPF topology diagram listed below.
OSPF can place each router (e.g., Vigor3900A, Vigor3900B and Vigor2960 shown above) at
the root of a tree and calculate the shortest path to each destination according to the
cumulative cost to reach the destination.
Each router has its own view of the topology and calculates its own SPF tree, even though all
the routers build a shortest-path tree using the same link-state database.
Vigor2960 Series User’s Guide
25
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
f
f
o
o
r
r
V
V
i
i
g
g
o
o
r
r
3
3
9
9
0
0
0
0
A
A
,
,
1. Open Routing >> General Setup to create a LAN (192.168.1.1/24) profile named lan1
with the settings shown below.
2. Next, continue to create a LAN (192.168.3.1/24) profile named lan2 with the settings
shown below.
3. Open LAN >> Static Route Setup and click the Inter-LAN Route tab to enable this
profile.
Vigor2960 Series User’s Guide
26
4. Open LAN >> OSPF Configuration to enable this profile. Click Add to make the LAN
Profiles lan2 area setting as 11 and lan1 area as 11. (As shown in the topology diagram.)
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
f
f
o
o
r
r
V
V
i
i
g
g
o
o
r
r
3
3
9
9
0
0
0
0
B
B
,
,
1. Open LAN >> General Setup to create a LAN (192.168.2.1/24) profile named lan1
with the settings shown below.
2. Next, continue to create a LAN (192.168.3.2/24) profile named lan2 with the settings
shown below.
Vigor2960 Series User’s Guide
27
3. Open LAN >> Static Route Setup and click the Inter-LAN Route tab to enable this
profile.
4. Open LAN >> OSPF Configuration to enable this profile. Click Add to make the LAN
Profiles lan2 area setting as 11 and lan1 area as 11. (As shown in the topology diagram.)
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
f
f
o
o
r
r
V
V
i
i
g
g
o
o
r
r
2
2
9
9
6
6
0
0
,
,
1. Open LAN >> General Setup to create a LAN (192.168.4.1/24) profile named lan1
with the settings shown below.
Vigor2960 Series User’s Guide
28
2. Next, continue to create a LAN (192.168.3.3/24) profile named lan2 with the settings
shown below.
3. Open LAN >> General Setup and click the Inter-LAN Route tab to enable this profile.
Vigor2960 Series User’s Guide
29
4. Open Routing >> OSPF Configuration to enable this profile. Click Add to make the
LAN Profiles lan2 area setting as 11 and lan1 area as 11. (As shown in the topology
diagram.)
5. After setting, check the routing information (marked with red line) which is created by
OSPF.
R
R
o
o
u
u
t
t
i
i
n
n
g
g
i
i
n
n
f
f
o
o
r
r
m
m
a
a
t
t
i
i
o
o
n
n
f
f
o
o
r
r
V
V
i
i
g
g
o
o
r
r
3
3
9
9
0
0
0
0
A
A
R
R
o
o
u
u
t
t
i
i
n
n
g
g
i
i
n
n
f
f
o
o
r
r
m
m
a
a
t
t
i
i
o
o
n
n
f
f
o
o
r
r
V
V
i
i
g
g
o
o
r
r
3
3
9
9
0
0
0
0
B
B
R
R
o
o
u
u
t
t
i
i
n
n
g
g
i
i
n
n
f
f
o
o
r
r
m
m
a
a
t
t
i
i
o
o
n
n
f
f
o
o
r
r
V
V
i
i
g
g
o
o
r
r
2
2
9
9
6
6
0
0
Vigor2960 Series User’s Guide
30
Vigor2960 Series User’s Guide
31
3
3
.
.
3
3
H
H
o
o
w
w
t
t
o
o
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
e
e
L
L
A
A
N
N
t
t
o
o
L
L
A
A
N
N
I
I
P
P
s
s
e
e
c
c
T
T
u
u
n
n
n
n
e
e
l
l
b
b
e
e
t
t
w
w
e
e
e
e
n
n
V
V
i
i
g
g
o
o
r
r
2
2
9
9
6
6
0
0
a
a
n
n
d
d
O
O
t
t
h
h
e
e
r
r
R
R
o
o
u
u
t
t
e
e
r
r
Here provides an example about LAN to LAN IPsec tunnel established between Vigor2960
and Vigor2710.
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
i
i
n
n
g
g
V
V
i
i
g
g
o
o
r
r
2
2
9
9
6
6
0
0
1. Access into the Web User Interfaceof Vigor2960 and open VPN and Remote Access
>> VPN Profiles to add a new VPN configuration.
Type the Pre-shared key and choose a WAN Profile. Specify Local IP/Subnet Mask
with 192.168.29.0/24. The Remote Host should be Vigor 2710's WAN IP address; And
the Remote IP/Subnet Mask should be192.168.2.0/24.
2. Click Apply to save the settings and return to previous page.
Vigor2960 Series User’s Guide
32
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
i
i
n
n
g
g
V
V
i
i
g
g
o
o
r
r
2
2
7
7
1
1
0
0
1. In Vigor2710, it is necessary to build two VPN connections (for two WANs) to connect
with Vigor2960. Please open the Web User Interface of Vigor2710 and open VPN and
Remote Access >> LAN to LAN.
First, please type the name of such VPN connection in the field of Profile Name
(e.g., 2960).
Check the box of Enable this profile.
Choose Dial-Out as Call Direction and check the box of Always on.
2. For Dial-Out Settings, please choose IPsec Tunnel and type WAN IP address of
Vigor2960 in the field of Server IP/Host Name for VPN (e.g., 1.169.162.1). Type the
same IKE Pre-Shared Key configured in Vigor2960.
Vigor2960 Series User’s Guide
33
3. For the role of Vigor2710 is dialing-out, please skip Dial-In setting. Type the Remote
Network IP and Remote Network Mask of Vigor2960 to complete configuration.
4. Please check if the VPN connection is built successfully in both devices respectively.
For Vigor2960, open VPN and Remote Access>>IPsec>>Status for viewing the
result.
As to Vigor2710, please open VPN and Remote Access>>Connection Management
to confirm the result.
Vigor2960 Series User’s Guide
34
3
3
.
.
4
4
C
C
V
V
M
M
A
A
p
p
p
p
l
l
i
i
c
c
a
a
t
t
i
i
o
o
n
n
-
-
H
H
o
o
w
w
t
t
o
o
m
m
a
a
n
n
a
a
g
g
e
e
t
t
h
h
e
e
C
C
P
P
E
E
(
(
r
r
o
o
u
u
t
t
e
e
r
r
)
)
t
t
h
h
r
r
o
o
u
u
g
g
h
h
V
V
i
i
g
g
o
o
r
r
2
2
9
9
6
6
0
0
?
?
To manage CPEs through Vigor2960, you have to set URL on CPE first and set username
and password for Vigor2960. For this section, we use Vigor2830 series as the example. The
firmware upgrade for the CPE can be done through Vigor2830 series.
3
3
.
.
4
4
.
.
1
1
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
e
e
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
o
o
n
n
V
V
i
i
g
g
o
o
r
r
2
2
9
9
6
6
0
0
1. Access into the web user interface of Vigor2960.
2. Open System Maintenance>>Access Control. Check Enable for Web Allow and
type the value for Web Port. Then click Apply to save the settings.
3. Open Central VPN Management>>CPE Management. On the page of CPE
Maintenance, there is no CPE managed by Vigor2960.
4. Open Central VPN Management>>General Setup.
Vigor2960 Series User’s Guide
35
5. Click the General Setup tab. Check the Enable box. Specify the WAN interface from
the WAN Profile drop down list. Type the values for Port, Username, and Password
respectively. Remember the values configured in this page.
6. Click Apply to save the settings.
3
3
.
.
4
4
.
.
2
2
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
e
e
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
o
o
n
n
C
C
P
P
E
E
To manage CPEs through Vigor2960, you have to set ACS URL on CPE first and set
username and password for Vigor2960.
1. Connect one CPE (e.g., Vigor2830 series) and get ready to access into the web user
interface of the CPE.
2. Open a web browser (for example, IE, Mozilla Firefox or Netscape) on your computer
and type http://192.168.1.1.
3. Please type username and password on the window. If you don’t know the correct
username and password, please consult our dealer to get them.
4. Open System Maintenance >> TR-069.
5. In the field of ACS Server, type the URL (IP address with port number) of Vigor2960:
“http://{IP address of Vigor296}:{CVM port}/ACSServer/services/ACSServlet”
and type the same Username and Password defined on the page of Central VPN
Management>>General Setup in Vigor2960. Then, click Enable for CPE Client and
then click OK to save the settings.
Vigor2960 Series User’s Guide
36
3
3
.
.
4
4
.
.
3
3
I
I
n
n
v
v
o
o
k
k
e
e
R
R
e
e
m
m
o
o
t
t
e
e
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
f
f
o
o
r
r
C
C
P
P
E
E
1. Login the web user interface of the CPE.
2. Open System Maintenance>>Management Setup.
3. Check Allow management from the Internet to set management access control.
Vigor2960 Series User’s Guide
37
3
3
.
.
4
4
.
.
4
4
E
E
n
n
a
a
b
b
l
l
e
e
W
W
A
A
N
N
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
o
o
n
n
o
o
n
n
C
C
P
P
E
E
1. Login the web user interface of the CPE.
2. Open WAN>>Internet Access. Use the drop down list of Access Mode on WAN1 to
select MPoA (RFC1483/2684). Then, click Details Page.
3. Click Specify an IP address. Type correct WAN IP address, subnet mask and gateway
IP address for your CPE. Then click OK.
Note: Reboot the CPE device and re-log into Vigor2960. CPE which has registered
to Vigor2960 will be captured and displayed on the page of Central VPN
Management>>CPE Management.
Vigor2960 Series User’s Guide
38
3
3
.
.
4
4
.
.
5
5
C
C
h
h
e
e
c
c
k
k
C
C
P
P
E
E
M
M
a
a
i
i
n
n
t
t
e
e
n
n
a
a
n
n
c
c
e
e
P
P
a
a
g
g
e
e
1. Return to the web user interface of Vigor2960.
2. Open Central VPN Management>>CPE Management.
3. Now there is one CPE managed (Vigor2830) by Vigor2960 on the page of CPE
Maintenance.
Vigor2960 Series User’s Guide
39
3
3
.
.
5
5
C
C
V
V
M
M
A
A
p
p
p
p
l
l
i
i
c
c
a
a
t
t
i
i
o
o
n
n
-
-
H
H
o
o
w
w
t
t
o
o
b
b
u
u
i
i
l
l
d
d
t
t
h
h
e
e
V
V
P
P
N
N
b
b
e
e
t
t
w
w
e
e
e
e
n
n
r
r
e
e
m
m
o
o
t
t
e
e
d
d
e
e
v
v
i
i
c
c
e
e
s
s
a
a
n
n
d
d
V
V
i
i
g
g
o
o
r
r
2
2
9
9
6
6
0
0
?
?
When a remote device is managed by Vigor2960 series, it is easy to build VPN between
these two devices.
1. Access into the web user interface of Vigor2960 series.
2. Open Central VPN Management>>CPE Management. The icons displayed on the
screen means the remote devices are ready for building VPN with Vigor2960.
3. Click the device icon (marked with
) and click the PPTP or IPsec button.
Vigor2960 Series User’s Guide
40
Or click Advanced to open the following page for specified the CPE you want. Click
Connect after finished the settings.
4. A confirmation dialog will appear. Click OK and wait for a moment.
5. If VPN is built successfully, related information will be displayed on Connected
Devices.
Vigor2960 Series User’s Guide
41
6. A LAN to LAN profile for such VPN will be generated automatically. You can access
into VPN and Remote Access>>LAN to LAN of the remote device for viewing the
detailed information.
Note: The profile name is created automatically by the system. Do not modify any
value in such page to avoid VPN error.
Vigor2960 Series User’s Guide
42
3
3
.
.
6
6
C
C
V
V
M
M
A
A
p
p
p
p
l
l
i
i
c
c
a
a
t
t
i
i
o
o
n
n
-
-
H
H
o
o
w
w
t
t
o
o
u
u
p
p
g
g
r
r
a
a
d
d
e
e
C
C
P
P
E
E
f
f
i
i
r
r
m
m
w
w
a
a
r
r
e
e
t
t
h
h
r
r
o
o
u
u
g
g
h
h
V
V
i
i
g
g
o
o
r
r
2
2
9
9
6
6
0
0
?
?
3
3
.
.
6
6
.
.
1
1
I
I
m
m
p
p
o
o
r
r
t
t
f
f
i
i
r
r
m
m
w
w
a
a
r
r
e
e
f
f
i
i
l
l
e
e
f
f
r
r
o
o
m
m
y
y
o
o
u
u
r
r
P
P
C
C
t
t
o
o
V
V
i
i
g
g
o
o
r
r
2
2
9
9
6
6
0
0
1. Suppose the newest firmware file is located on your PC. You can upload it from your
PC to Vigor2960.
2. Log into the web user interface of Vigor2960.
3. Open System Maintenance>>Access Control. Check Enable for Web Allow and
type the value for Web Port. Then click Apply to save the settings.
4. Open Central VPN Management>>CPE Management. Click CPE Maintenance. In
the Maintenance area, click File Explorer.
5. In the File Explorer dialog, click Upload.
Vigor2960 Series User’s Guide
43
6. In the Upload dialog, click the Browse.. button to find out the firmware (e.g.,
2830_0508 in this case) you want to upload from PC to Vigor2960. Then, click
Upload.
Vigor2960 Series User’s Guide
44
7. When the file is uploaded successfully, later you will find the one in the File Explorer
dialog.
Vigor2960 Series User’s Guide
45
3
3
.
.
6
6
.
.
2
2
S
S
e
e
t
t
a
a
n
n
e
e
w
w
f
f
i
i
r
r
m
m
w
w
a
a
r
r
e
e
u
u
p
p
g
g
r
r
a
a
d
d
e
e
p
p
r
r
o
o
f
f
i
i
l
l
e
e
To create a new firmware upgrade profile, one CPE (e.g., 2830 in this case) must be
managed by Vigor2960 at least. Otherwise, the profile cannot be created successfully.
1. Open Central VPN Management>>CPE Management. Click CPE Maintenance. In
the Maintenance area, click Add.
2. In the following dialog, type the name for the new profile; specify the vigor router the
file will be applied to; choose Firmware Upgrade as the Action, choose Now as the
Schedule (it means the firmware upgrade will be performed after clicking Apply); and
type the string of the firmware filename or click
to choose a correct one.
Vigor2960 Series User’s Guide
46
3. When you finished the above settings, click Apply to save them. The new maintenance
profile has been created and displayed on the Maintenance area.
4. Now, the new firmware will be loaded into the CPE immediately (based on the
schedule setting – now).
Note that a red icon,
will appear during the period of firmware upgrading.
And, in the web user interface of client’s CPE, the system will show you that firmware
upgrade is on going.
Vigor2960 Series User’s Guide
47
5. Please wait for a moment. Later, open Central VPN Management>>Log/Alert>>Log
page to check the result. If [Finished] is displayed, it means the firmware upgrade of
specified CPE has completed.
3
3
.
.
6
6
.
.
3
3
C
C
h
h
e
e
c
c
k
k
t
t
h
h
e
e
D
D
e
e
v
v
i
i
c
c
e
e
I
I
n
n
f
f
o
o
r
r
m
m
a
a
t
t
i
i
o
o
n
n
1. Open Central VPN Management>>CPE Management. In the Managed Devices
Status area, choose the router (representing Vigor2830) and click Detail.
2. Check the software version field.
Vigor2960 Series User’s Guide
48
3
3
.
.
7
7
H
H
o
o
w
w
t
t
o
o
u
u
s
s
e
e
H
H
i
i
g
g
h
h
A
A
v
v
a
a
i
i
l
l
a
a
b
b
i
i
l
l
i
i
t
t
y
y
f
f
o
o
r
r
V
V
i
i
g
g
o
o
r
r
r
r
o
o
u
u
t
t
e
e
r
r
s
s
?
?
This document introduces how to set up HA in Hot-Standby mode and here is the scenario:
LAN1 and LAN2 have Internet Access through the Master device. When Master detects
LAN or WAN fails, both LAN1 and LAN2 will have Internet Access through the Backup
device. Before configuring High Availability, we need to setup LAN profiles and the LAN
VLAN ID configurations on each router by following rules:
The LAN profile name and LAN VLAN ID of corresponding LAN between different
routers must be the same.
The LAN profile IP address of HA LAN on each router must NOT be the same.
The LAN profile IP address except HA LAN on each router must be the same.
Example:
Router_A: LAN1(HA-LAN)-192.168.166.1 LAN2-10.10.10.1
Router_B: LAN1(HA-LAN)-192.168.166.2 LAN2-10.10.10.1
Vigor2960 Series User’s Guide
49
Note: Make sure the WAN interfaces for both Router A and Router B are well
connected. Both routers can be used to access into Internet.
Note: For advanced applications, please refer to FAQ/Application Notes on
www.draytek.com.
V
V
i
i
g
g
o
o
r
r
2
2
9
9
6
6
0
0
-
-
M
M
a
a
s
s
t
t
e
e
r
r
S
S
e
e
t
t
u
u
p
p
1. Go to Applications >> High Availability >> Hot-Standby Profile Setup page.
Select lan1 for HA LAN Profile.
Input Priority ID as 1 which is the highest priority.
Input 192.168.166.99 as Virtual IP for Gateway. (Virtual IP should be an IP in
lan1 network)
Input Group ID 100. (The other Vigor2960 should have same Group ID), then
click Apply.
2. Go to Applications >> High Availability >> Hot-Standby Global Setup page.
Check to Enable High Availability.
Select Hot-Standby as the Redundant Method.
Vigor2960 Series User’s Guide
50
Input Authentication Key (The other Vigor2960 should have same Authentication
Key, otherwise the configuration synchronization will fail.)
Select Immediate as the Advance Preemption Mode.
Select Enable for WAN Connection Status Detection.
Select At Least One Up for LAN Port Status Detection.
V
V
i
i
g
g
o
o
r
r
2
2
9
9
6
6
0
0
-
-
S
S
l
l
a
a
v
v
e
e
S
S
e
e
t
t
u
u
p
p
3. Go to LAN >>General Setup >>lan1 profile (the HA LAN profile) to change the IP
Address first, the LAN IP should be different from Vigor2960-Master.
4. Go to Applications >> High Availability >> Hot-Standby Profile Setup page.
Select lan1 for HA LAN Profile.
Input Priority ID as 2 since we already have the other Vigor2960 configuring with
Priority ID 1.
Input 192.168.166.99 as Virtual IP for Gateway. (Virtual IP should be the same
as the Virtual IP set up on the other Vigor2960.)
Vigor2960 Series User’s Guide
51
Input Group ID 100 (should be the same as the Group ID on the other Vigor2960)
then click Apply.
5. Go to Applications >> High Availability >> Hot-Standby Global Setup page.
Check to Enable High Availability.
Select Hot-Standby as the Redundant Method.
Input Authentication Key (The Authentication Key should be the same as the
other Vigor2960, otherwise the configuration synchronization will fail.)
Select Immediate as the Advance Preemption Mode.
Select Disable for WAN Connection Status Detection. (Because in Hot-Standby
mode, Master and Slave router share the same Internet connection. This is to ensure
Slave device will keep Inter-LAN working when WAN connection is really failed.)
Select Disable for LAN Port Status Detection.
6. After completing above configurations, we can connect Vigor2960 Slave's LAN to
Vigor2960 Master's LAN. Then configuration synchronization will start. Slave will
backup and restore the whole Master configurations except for LAN IP, HA
configurations, Administrator Password, and Router Name. Please do not connect the
WAN on the Vigor2960 Slave at the moment.
7. After configuration synchronized, Slave will do a restart. We can check HA Status via
Applications >> High Availability >> HA Status page.
Vigor2960 Series User’s Guide
52
8. By clicking Detail button, we can see more device information.
9. When Master meets WAN or LAN Fail Event, or be powered off, the Vigor2960 with
Priority ID 2 will become Master.
10. When upgrading the firmware version of the Master Vigor2960, Backup router will
upgrade to same firmware version automatically. The process is:
Master reboots for applying new firmware.
Master is up and exchanges HA information with the backup router.
Backup router finds firmware version is not equal.
Backup router will download the firmware from Master router, and then upgrade
itself automatically.
Vigor2960 Series User’s Guide
53
3
3
.
.
8
8
H
H
o
o
w
w
t
t
o
o
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
e
e
D
D
N
N
S
S
I
I
n
n
b
b
o
o
u
u
n
n
d
d
L
L
o
o
a
a
d
d
B
B
a
a
l
l
a
a
n
n
c
c
e
e
o
o
n
n
V
V
i
i
g
g
o
o
r
r
2
2
9
9
6
6
0
0
?
?
Vigor2960 can offer the mapped IP address to respond the DNS query coming from the
remote end through the designate domain to reduce the loading of the network traffic.
WAN1 IP Address: 1.1.1.1
WAN2 IP Address: 2.2.2.2
Inbound Load Balance
allows Vigor2960 acting as a DNS Server to separate the traffic for
each WAN interface according to the DNS query time. Follow the steps listed below to
Configure DNS Inbound Load Balance.
E
E
n
n
a
a
b
b
l
l
i
i
n
n
g
g
W
W
e
e
b
b
s
s
e
e
r
r
v
v
i
i
c
c
e
e
o
o
n
n
t
t
h
h
e
e
R
R
o
o
u
u
t
t
e
e
r
r
1. Open NAT >> Port Redirection to set up Port Redirection rules for the Web server.
Click Apply to save the settings.
Vigor2960 Series User’s Guide
54
2. Open WAN >> Load Balance and click the tab of Inbound Load Balance to enable the
service. Click Add.
3. Add a profile named “yourdomain.com”. Define WAN1 weights 1 and WAN2 weights 2.
It means the total DNS query time will be three, one will pass through WAN1; two will
pass through WAN2.
4. Click the Detail tab and locate Additional A Record. Type “www” as the name of the
Host, and type “192.168.1.10” as the IP Address.
Vigor2960 Series User’s Guide
55
5. Then click Apply to save the settings.
Now, make a test for inbound load balance.
Click Start>> Run and type cmd. Execute the command, nslookup, for DNS query test.
First DNS query
>www.yourdomain.com
Server: [google-public-dns-a.google.com]
Address: 8.8.8.8
Name: www. yourdomain.com
Address: 1.1.1.1
Second DNS query
> www.yourdomain.com
Server: [google-public-dns-a.google.com]
Address: 8.8.8.8
Name: www.yourdomain.com
Address: 2.2.2.2
Third DNS query
> www.yourdomain.com
Server: [google-public-dns-a.google.com]
Address: 8.8.8.8
Name: www.yourdomain.com
Address: 2.2.2.2
Note: It is recommended to clear cache before executing “nslookup” for DNS query.
Vigor2960 Series User’s Guide
56
This page is left blank.
Vigor2960 Series User’s Guide
57
C
C
h
h
a
a
p
p
t
t
e
e
r
r
4
4
:
:
A
A
d
d
v
v
a
a
n
n
c
c
e
e
d
d
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
After finished basic configuration of the router, you can access Internet with ease. For the
people who want to adjust more setting for suiting his/her request, please refer to this chapter
for getting detailed information about the advanced configuration of this router. As for other
examples of application, please refer to chapter 3.
4
4
.
.
1
1
W
W
A
A
N
N
Quick Start Wizard offers user an easy method to quick setup the connection mode for the
router. Moreover, if you want to adjust more settings for different WAN modes, please go to
WAN group and click the General Setup link.
B
B
a
a
s
s
i
i
c
c
s
s
o
o
f
f
I
I
n
n
t
t
e
e
r
r
n
n
e
e
t
t
P
P
r
r
o
o
t
t
o
o
c
c
o
o
l
l
(
(
I
I
P
P
)
)
N
N
e
e
t
t
w
w
o
o
r
r
k
k
IP means Internet Protocol. Every device in an IP-based Network including routers, print
server, and host PCs, needs an IP address to identify its location on the network. To avoid
address conflicts, IP addresses are publicly registered with the Network Information Centre
(NIC). Having a unique IP address is mandatory for those devices participated in the public
network but not in the private TCP/IP local area networks (LANs), such as host PCs under
the management of a router since they do not need to be accessed by the public. Hence, the
NIC has reserved certain addresses that will never be registered publicly. These are known as
private IP addresses, and are listed in the following ranges:
From 10.0.0.0 to 10.255.255.255
From 172.16.0.0 to 172.31.255.255
From 192.168.0.0 to 192.168.255.255
W
W
h
h
a
a
t
t
a
a
r
r
e
e
P
P
u
u
b
b
l
l
i
i
c
c
I
I
P
P
A
A
d
d
d
d
r
r
e
e
s
s
s
s
a
a
n
n
d
d
P
P
r
r
i
i
v
v
a
a
t
t
e
e
I
I
P
P
A
A
d
d
d
d
r
r
e
e
s
s
s
s
As the router plays a role to manage and further protect its LAN, it interconnects groups of
host PCs. Each of them has a private IP address assigned by the built-in DHCP server of the
Vigor router. The router itself will also use the default private IP address: 192.168.1.1 to
communicate with the local hosts. Meanwhile, Vigor router will communicate with other
network devices through a public IP address. When the data flow passing through, the
Network Address Translation (NAT) function of the router will dedicate to translate
public/private addresses, and the packets will be delivered to the correct host PC in the local
area network. Thus, all the host PCs can share a common Internet connection.
G
G
e
e
t
t
Y
Y
o
o
u
u
r
r
P
P
u
u
b
b
l
l
i
i
c
c
I
I
P
P
A
A
d
d
d
d
r
r
e
e
s
s
s
s
f
f
r
r
o
o
m
m
I
I
S
S
P
P
In ADSL deployment, the PPP (Point to Point)-style authentication and authorization is
required for bridging customer premises equipment (CPE). Point to Point Protocol over
Ethernet (PPPoE) connects a network of hosts via an access device to a remote access
concentrator or aggregation concentrator. This implementation provides users with
significant ease of use. Meanwhile it provides access control, billing, and type of service
according to user requirement.
When a router begins to connect to your ISP, a serial of discovery process will occur to ask
for a connection. Then a session will be created. Your user ID and password is authenticated
Vigor2960 Series User’s Guide
58
via PAP or CHAP with RADIUS authentication system. And your IP address, DNS server,
and other related information will usually be assigned by your ISP.
4
4
.
.
1
1
.
.
1
1
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
This section will introduce some general settings of Internet and explain the connection
modes for WAN profiles in details.
This router supports multi-WAN function. It allows users to access Internet and combine the
bandwidth of the WAN profiles to speed up the transmission through the network. Each
WAN port can connect to different ISPs, even if the ISPs use different technology to provide
telecommunication service (such as DSL, Cable modem, etc.). If any connection problem
occurred on one of the ISP connections, all the traffic will be guided and switched to the
normal communication port for proper operation.
Note: Some menu items (e.g., Bridge VLAN) are available only under Advance Mode.
Web Page in Basic Mode
Web Page in Advance Mode
Vigor2960 Series User’s Guide
59
Each item will be explained as follows:
Item Description
Add
Add a new WAN profile.
Such function is available in Advance mode only.
Edit
Modify the selected WAN profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected WAN profile. Such function is
available in Advance mode only.
To delete a profile, simply select the one you want to delete
and click the Delete button.
Refresh
Renew current web page.
Mode
Specify the mode for adding /editing (Advance) new WAN
profile or just editing (Basic) existing WAN profile.
Switch Mode
This mode determines a WAN interface can be set with
single or double VLAN ID values.
Normal – It means only one VLAN ID value can be
configured for the WAN interface.
Double Tag – It means two VLAN ID values (802.1q in q)
can be configured for a WAN interface.
Profile Number Limit
Display the total number (50) of the profiles to be created.
Vigor2960 Series User’s Guide
60
Profile (max length:7)
Display the profile name.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Description
Display a brief explanation for such profile.
Port
Display the physical WAN interface for such profile.
IPv4 Protocol Type
Display the IPv4 protocol selected by the profile.
IPv6 Protocol Type
Display the IPv6 protocol selected by the profile.
VLAN Tag
If the data transmitted with tag, Enable will be displayed in
this field. Otherwise, Disable will be shown instead.
VLAN ID
Display the VLAN ID of the profile.
Priority(802.1p)
Display the level of the priority for such profile.
4
4
.
.
1
1
.
.
1
1
.
.
1
1
E
E
t
t
h
h
e
e
r
r
n
n
e
e
t
t
W
W
A
A
N
N
P
P
r
r
o
o
f
f
i
i
l
l
e
e
s
s
How to add a new WAN profile:
1. If the router is under Basic mode, you have to switch into Advance mode. If the router
is under Advance mode, go to Step 4 directly.
2. A confirmation dialog will appear. Click OK to apply the related settings for Advance
mode.
3. Re-login the system.
4. Open WAN>>General Setup. Click the Add button to open the following dialog.
Different protocol type selected will bring up different configuration web page.
Vigor2960 Series User’s Guide
61
Available parameters for global configuration are listed as follows:
Item Description
Profile (max
length:7)
Type a name (less than 7 characters) for such profile.
Enable
Check this box to enable such profile.
Description
Give the brief description for such profile.
Port
Display the physical WAN interface for such profile.
Default MAC
Address
Enable – Click it to enable the default MAC address for
such profile.
Disable – Click it to type the MAC address manually for
such profile.
MAC Address - Specify the MAC address for such profile if
you click Disable for Default MAC address. In default, the
system will determine it automatically.
IPv4 Protocol
There are four connection modes for you to specify for IPv4
protocol type. Each mode will bring up different web page.
Mode
Determine such profile will be used for NAT or routing.
Vigor2960 Series User’s Guide
62
IPv6 Protocol
There are five connection modes for you to specify for IPv6
protocol type. Each mode will bring up different web page.
Enable Schedule
Reconnect
Enable – Click it to enable the function of reconnecting the
network automatically within the time schedule.
Schedule Time Object - Choose the time object profile
to be applied by such WAN.
Disable – Click it to disable the schedule reconnect function.
VLAN Tag
Enable – Click it to enable the function of VLAN Tag. Data
transmitted through the router will be tagged with specified
number for identification.
Disable – Click it to disable the function of VLAN Tag.
Data transmitted through the router will not be tagged with
any number.
VLAN ID
Type the VLAN ID number for such profile.
Priority(802.1p)
Type the packet priority number for such VLAN. The range
is from 0 to 7.
Apply
Click it to save the configuration and exit the dialog.
Cancel
Click it to exit the dialog without saving the configuration.
Global configuration allows you to enable the profile, give a brief explanation for such
profile, specify the VLAN ID, specify MAC address, choose IPv4 and IPv6 protocol,
and specify the mode of the data transmission (NAT or Routing).
Vigor2960 Series User’s Guide
63
Different IPv4 and IPv6 protocol types specified will bring up different configuration
web page.
If you choose Static as IPv4 protocol type, click the Static tab to open the following
page:
Available parameters are listed as follows:
Item Description
IP Address
Type the IP address (e.g., 192.168.1.x) specified for such
profile.
Subnet Mask
Use the drop down list to choose the subnet mask for such
profile.
Gateway IP
Address
Type a public gateway address for such WAN profile.
DNS Server IP
Address
Add – Click this button to display the IP address field for
adding a new IP address. Type the IP address on the tiny
boxes one by one.
Save – After finished the IP address configuration, click
Save to save the setting onto the router.
IP Alias
Type other IP addresses to be bound to this interface. This
Vigor2960 Series User’s Guide
64
setting is optional. If you have typed addresses here, you can
see and choose it in later web page settings (e.g.,
NAT>>Port Redirection/DMZ Host).
Add – Click this button to display the IP address field for
adding a new IP address. Type the IP address on the tiny
boxes one by one.
Save – After finished the IP address configuration, click
Save to save the setting onto the router.
MTU/MRU
Type the value of MTU/MRU. The default value is 1500.
Connection
Detection Mode
Select a detecting mode for this WAN interface. There are
three ways ARP, PING and HTTP supported in Vigor
router for you to choose to send the request out.
Connection
Detection Host
Assign an IP address or Domain name as a destination to be
detected whether the host is active (sending reply to the
router) or not. If not, the connection of WAN interface will
be regarded as breaking down. This function is available
when Connection Detection Mode is set with PING or
HTTP.
Add – click this button to have a field for adding a new IP
address.
Save – click this button to save the setting.
Connection
Detection Interval
Assign an interval period of time for each detecting.
Vigor2960 Series User’s Guide
65
Connection
Detection Retry
Assign detecting times to ensure the connection of the WAN
interface. After passing the times you set in this field and no
reply received by the router, the connection of WAN
interface will be regarded as breaking down.
Apply
Click it to save the configuration and exit the dialog.
Cancel
Click it to exit the dialog without saving the configuration.
If you choose DHCP as IPv4 protocol type, click the DHCP Tab to open the
following page:
Available parameters are listed as follows:
Item Description
Host Name
(Optional)
Type a name as the host name for identification.
IP Alias
Type other IP addresses to be bound to this interface. This
setting is optional. If you have typed addresses here, you can
see and choose it in later web page settings (e.g.,
NAT>>Port Redirection.
Add – To add a new IP address, click Add. Type the IP
address and use the drop down list to specify the subnet
mask. Next, click Save. The new one will be added and
displayed on the field under the box.
Save – Click this button to save the setting.
MTU/MRU
It means Max Transmit Unit for packet. The default setting
Vigor2960 Series User’s Guide
66
is 1500.
Connection
Detection Mode
Select a detecting mode for this WAN interface. There are
three ways ARP, PING and HTTP supported in Vigor
router for you to choose to send the request out.
Connection
Detection Host
Add – click this button to have a field for adding a new IP
address. Assign an IP address or Domain name as a
destination to be detected whether the host is active (sending
reply to the router) or not. If not, the connection of WAN
interface will be regarded as breaking down. This function is
available when Connection Detection Mode is set with
PING or HTTP.
Save – Click this button to save the setting.
Connection
Detection Interval
Assign an interval period of time for each detecting.
Connection
Detection Retry
Assign detecting times to ensure the connection of the WAN
interface. After passing the times you set in this field and no
reply received by the router, the connection of WAN
interface will be regarded as breaking down.
Vendor Class ID
(option 60)
Type a string for identification of vendor. It is required for
the mode, DHCP (option 60).
DHCP Client ID
(option 61)
Type a string (in the field of Username) for identification of
client. It is required for the mode, DHCP (option 61).
Specify username and password as the DHCP client
identifier for some ISP.
Username – Type a name for authentication.
Password – It is optional. If you want, simply type a
password for authentication if you want.
Specify DNS
Enable – Click it to enable the function of DNS specified.
It is used for local service (e.g., NTP, ping diagnostic) or
used for forwarding packets to PC on LAN/VPN.
Disable – Click it to disable the function of DNS specified.
DNS
Add – click this button to have a field for adding a new IP
address.
Save – click this button to save the setting.
Apply
Click it to save the configuration and exit the dialog.
Vigor2960 Series User’s Guide
67
Cancel
Click it to exit the dialog without saving the configuration.
If you choose PPPoE as IPv4 protocol type, click the PPPoE Tab to open the
following page:
Available parameters are listed as follows:
Item Description
Username
Type the user name offered by your ISP.
Password
Type the password offered by your ISP.
MTU/MRU
Type the value of MTU/MRU. The default value is 1492.
Service Name
This is an optional setting. Some ISP will offer such
information and ask you to type the same data on this field.
Debug
Click Enable to display the PPPoE debug message in
Syslog. The default setting is Disable.
Always On
Enable – Click it to enable the function of Always On. The
router will keep network connection all the time.
Disable – Click it to disable the function of Always On.
Fixed IP
Enable – Click it to enable the function of Always On. The
router will keep network connection all the time.
Disable – Click it to disable the function of Always On.
Fixed IP Address – Type an IP address here if you choose
Enable for Fixed IP.
Connection
Detection Mode
Select a detecting mode for this WAN interface. There are
two ways PING and HTTP supported in Vigor router for
you to choose to send the request out.
Vigor2960 Series User’s Guide
68
Connection
Detection Host
If you choose PING/HTTP as Connection Detection Mode,
you have to specify the detection host address in this field.
Use the default setting.
Add – Click this button to have a field for adding a new IP
address. Assign an IP address or Domain name as a
destination to be detected whether the host is active (sending
reply to the router) or not. If not, the connection of WAN
interface will be regarded as breaking down. This function
is available when Connection Detection Mode is set with
PING or HTTP.
Save – Click this button to save the setting.
Connection
Detection Interval
Assign an interval period of time for each detecting.
Connection
Detection Retry
Assign detecting times to ensure the connection of the WAN
interface. After passing the times you set in this field and no
reply received by the router, the connection of WAN
interface will be regarded as breaking down.
IP Alias
Type other IP addresses to be bound to this interface. This
setting is optional. If you have typed addresses here, you can
see and choose it in later web page settings (e.g.,
NAT>>Port Redirection/DMZ Host).
Add – Click this button to display the IP address field for
adding a new IP address. Type the IP address on the tiny
boxes one by one.
Save – After finished the IP address configuration, click
Save to save the setting onto the router.
Vigor2960 Series User’s Guide
69
Specify DNS
Enable – Click it to enable the function of DNS specified.
It is used for local service (e.g., NTP, ping diagnostic) or
used for forwarding packets to PC on LAN/VPN.
Disable – Click it to disable the function of DNS specified.
DNS
Add – click this button to have a field for adding a new IP
address.
Save – click this button to save the setting.
Apply
Click it to save the configuration and exit the dialog.
Cancel
Click it to exit the dialog without saving the configuration.
If you choose PPTP as IPv4 protocol type, click the PPTP Tab to open the
following page:
Available parameters are listed as follows:
Item Description
PPTP Over
Usually ISP dynamically assigns IP address to you each time
you connect to it and request. In some case, your ISP
provides service to always assign you the same IP address
whenever you request. In this case, you can fill in this IP
address in the Fixed IP field. Please contact your ISP
before you want to use this function.
Choose a proper protocol, Static or DHCP. After finished
the settings in such page, you need to open the Static or
DHCP tab for configuring the settings there.
Vigor2960 Series User’s Guide
70
Server Address
Type the IP address of PPTP server offered by your ISP.
Username
Type the user name offered by your ISP.
Password
Type the password offered by your ISP.
MTU/MRU
Type the value of MTU/MRU. The default value is 1452.
Debug
Click Enable to display the PPTP debug message in syslog.
The default setting is Disable.
Always On
Enable – Click it to enable the function of Always On. The
router will keep network connection all the time.
Disable – Click it to disable the function of Always On.
Connection
Detection Mode
Select a detecting mode for this WAN interface. There are
two ways PING and HTTP supported in Vigor router for
you to choose to send the request out.
Connection
Detection Host
If you choose PING/HTTP as Connection Detection Mode,
you have to specify the detection host address in this field.
Use the default setting.
Add – Click this button to have a field for adding a new IP
address. Assign an IP address or Domain name as a
destination to be detected whether the host is active (sending
reply to the router) or not. If not, the connection of WAN
interface will be regarded as breaking down. This function
is available when Connection Detection Mode is set with
PING or HTTP.
Save – Click this button to save the setting.
Connection
Detection Interval
Assign an interval period of time for each detecting.
Connection
Detection Retry
Assign detecting times to ensure the connection of the WAN
interface. After passing the times you set in this field and no
reply received by the router, the connection of WAN
interface will be regarded as breaking down.
Apply
After finished the PPTP configuration, please click Static or
DHCP (according to the PPTP Over Protocol setting) to
modify the Static/DHCP configuration for such profile.
Click it to save the configuration and exit the dialog.
Cancel
Click it to exit the dialog without saving the configuration.
Vigor2960 Series User’s Guide
71
If you choose Link-Local as IPv6 protocol type
Link-Local address is used for communicating with neighbouring nodes on the same
link. It is defined by the address prefix fe80::/64. You don't need to setup Link-Local
address manually for it is generated automatically according to your MAC Address.
If you choose PPP as IPv6 protocol type
Simply refer to the section of “If you choose PPPoE as IPv4 protocol type, click the
PPPoE Tab to open the following page” for detailed information.
If you choose Static as IPv6 protocol type, click the StaticV6 tab to open the
following page:
Available parameters are listed as follows:
Item Description
IPv6 Address
Type the IP address for such protocol.
IPv6 Prefix Length
Type your IPv6 address prefix length.
IPv6 Gateway
Address
Type your IPv6 gateway address.
IPv6 DNS Server
Address
Type your IPv6 primary DNS Server address.
Add – Click this button to have a field for adding a new IP
address.
Save – Click this button to save the setting.
Vigor2960 Series User’s Guide
72
Apply
Click it to save the configuration and exit the dialog.
Cancel
Click it to exit the dialog without saving the configuration.
If you choose DHCP IA NA as IPv6 protocol type, click the DHCPV6 Tab to open
the following page:
Available parameters are listed as follows:
Item Description
DHCP (IA_NA)
Gateway Address
Type the gateway IP address for IPv6 DHCP IA_NA mode.
DHCP (IA_NA)
DNS Address
Add – Click this button to type primary DNS server address
for IPv6.
Save – Click this button to save the setting.
Apply
Click it to save the configuration and exit the dialog.
Cancel
Click it to exit the dialog without saving the configuration.
If you choose DHCP IA PD as IPv6 protocol type
It is not necessary for you to configure any web page.
5. After finished the settings configuration, click Apply to save and apply the settings.
Vigor2960 Series User’s Guide
73
4
4
.
.
1
1
.
.
1
1
.
.
2
2
U
U
S
S
B
B
W
W
A
A
N
N
P
P
r
r
o
o
f
f
i
i
l
l
e
e
s
s
Open WAN>>General Setup and click the USB WAN tab.
Each item will be explained as follows:
Item Description
Edit
Modify the selected USB WAN profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Refresh
Renew current web page.
Profile
Display the profile name.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Description
Display a brief explanation for such profile.
Port
Display the physical WAN interface for such profile.
Protocol
Display the protocol selected by the profile.
Vigor2960 Series User’s Guide
74
H
H
o
o
w
w
t
t
o
o
e
e
d
d
i
i
t
t
a
a
U
U
S
S
B
B
W
W
A
A
N
N
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Choose one of the USB WAN profiles and click Edit.
2. The settings under Global tab are listed as below:
Available parameters are listed as follows:
Item Description
Profile
Display the name of the USB WAN profile.
Enable
Check it to enable the USB WAN profile.
Description
Give the brief description for such profile.
Port
Display the physical WAN interface for such profile.
Protocol
Choose the connection mode for USB WAN.
Connection
Detection Host
If you choose PING/HTTP as Connection Detection Mode,
you have to specify the detection host address in this field.
Use the default setting.
Add – Click this button to have a field for adding a new IP
address. Assign an IP address or Domain name as a
destination to be detected whether the host is active (sending
reply to the router) or not. If not, the connection of WAN
interface will be regarded as breaking down. This function
is available when Connection Detection Mode is set with
PING or HTTP.
Vigor2960 Series User’s Guide
75
Save – Click this button to save the setting.
Connection
Detection Interval
Assign an interval period of time for each detecting.
Connection
Detection Retry
Assign detecting times to ensure the connection of the WAN
interface. After passing the times you set in this field and no
reply received by the router, the connection of WAN
interface will be regarded as breaking down.
Default
Click it to restore the default settings.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
3. After finished the settings above, click the 3G/4G PPP or 4G DHCP tab (based on the
Protocol specified) to display the following page:
Or,
Vigor2960 Series User’s Guide
76
Available parameters are listed as follows:
Item Description
3G/4G PPP
SIM PIN code -Type PIN code of the SIM card that will be
used to access Internet.
Modem Initial String 1-Such value is used to initialize USB
modem. Please use the default value. If you have any
question, please contact to your ISP.
Modem Initial String 2-The initial string 1 is shared with
APN. In some cases, user may need another initial AT
command to restrict 3G band or do any special settings.
APN -APN means Access Point Name which is provided
and required by some ISPs. Type the name.
Modem Dial String -Such value is used to dial through USB
mode. Please use the default value. If you have any question,
please contact to your ISP.
PPP Username -Type the PPP username (optional).
PPP Password -Type the PPP password (optional).
4G DHCP
SIM Pin code –Type PIN code of the SIM card that will be
used to access Internet.
Network Mode – Force Vigor router to connect Internet
with the mode specified here. If you choose 4G/3G/2G as
network mode, the router will choose a suitable one
according to the actual wireless signal automatically.
APN – APN means Access Point Name which is provided
Vigor2960 Series User’s Guide
77
and required by some ISPs.
Default
Click it to restore the default settings.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
4. Enter all of the settings and click Apply.
Vigor2960 Series User’s Guide
78
4
4
.
.
1
1
.
.
1
1
.
.
3
3
B
B
r
r
i
i
d
d
g
g
e
e
V
V
L
L
A
A
N
N
P
P
r
r
o
o
f
f
i
i
l
l
e
e
s
s
Open WAN>>General Setup and click the Bridge VLAN tab.
It can specify a VLAN ID for WAN port and offers more advanced environmental
application for the users through the bridge technique in WAN port and LAN port.
Each item will be explained as follows:
Item Description
Add
Click to create a new profile.
Edit
Modify the selected USB WAN profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected WAN profile. Such function is
available in Advance mode only.
To delete a profile, simply select the one you want to delete
and click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number of the profiles to be created.
Profile
Display the profile name.
WAN Profile
Display the WAN profile selected.
LAN VLAN/Member
Display VLAN ID number of the LAN port selected.
Enable GRE Bridging
Display the status of GRE bridging.
Remote GRE IP
Display the IP information for remote GRE IP.
Vigor2960 Series User’s Guide
79
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
a
a
n
n
e
e
w
w
b
b
r
r
i
i
d
d
g
g
e
e
V
V
L
L
A
A
N
N
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Click Add.
2. The settings are listed as below:
Available parameters are listed as follows:
Item Description
Profile
Type the name of the profile.
WAN Profile
Use the drop down list to choose the WAN interface.
LAN
VLAN/Member
Choose a VLAN profile from the drop down list.
You have to open LAN>>Switch page and click 802.1Q
VLAN for creating VLAN ID number bound with LAN port
(802.1Q VLAN profile) first. Otherwise, no profiles will be
displayed here for you to specify.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
3. Enter all of the settings and click Apply. The new profile will be shown as below.
Vigor2960 Series User’s Guide
80
4
4
.
.
1
1
.
.
2
2
I
I
n
n
b
b
o
o
u
u
n
n
d
d
L
L
o
o
a
a
d
d
B
B
a
a
l
l
a
a
n
n
c
c
e
e
Vigor2960 can offer the mapped IP address to respond the DNS query coming from the
remote end through the designate domain to reduce the loading of the network traffic.
4
4
.
.
1
1
.
.
2
2
.
.
1
1
I
I
n
n
b
b
o
o
u
u
n
n
d
d
L
L
o
o
a
a
d
d
B
B
a
a
l
l
a
a
n
n
c
c
e
e
Open WAN>>Load Balance and click the Inbound Load Balance tab.
Each item will be explained as follows:
Item Description
Enable
Check the box the enable inbound load balance function.
Add
Add a new WAN profile for inbound load balance.
Edit
Modify the selected WAN profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Vigor2960 Series User’s Guide
81
Delete
Remove the selected WAN profile.
To delete a profile, simply select the one you want to delete
and click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number of the profiles to be created.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Domain Name
Display the domain name used by the profile.
Mode
Display the mode (failover or load balance) applied by the
profile.
IP Mapping
Display the WAN interfaces used by the profile.
Weight
Display the weight(s) that WAN interface(s) used.
Alias Interface
Display the WAN interfaces used by the IP alias.
IP
Display the alias IP settings used by the profile.
Alias Weight
Display the weight that the above IP address used.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
I
I
n
n
b
b
o
o
u
u
n
n
d
d
L
L
o
o
a
a
d
d
B
B
a
a
l
l
a
a
n
n
c
c
e
e
p
p
r
r
o
o
f
f
i
i
l
l
e
e
Such page allows you to create a new WAN profile for inbound load balance.
1. Open WAN>>Inbound Load Balance.
2. Simply click the Add button to open the following dialog.
Available parameters are listed as follows:
Item Description
Status
Check this box to enable such profile.
Domain Name
Type an available domain name to serve the inbound load
Vigor2960 Series User’s Guide
82
balance.
Mode
Specify the type (Load Balance or Failover) of the WAN
profile for inbound load balance
Priority Setting
It is available only when Failover is selected as the Mode.
There are five levels (Top, 2, 3, 4 and 5) which can be
specified for WAN profiles (including default WAN profiles
and user-defined WAN profiles).
Interface
Mapping/Weight
The domain name will inform the remote end with the IP
address for DNS query asked by the remote end.
The incoming query from the WAN interfaces specified in IP
Mapping will be processed according to the weight value.
Add – Click it to choose a WAN interface and weight.
Save – Click it to save the settings.
IP Mapping – Use the drop down list to choose a WAN
interface profile which will be used by the domain.
Weight – Use the drop down list to choose the one you want.
Alias Setting
The purpose of such setting is to specify a WAN IP address
from the WAN interface or by typing it manually to respond
DNS query.
Add – Click it to add a new IP address.
Save – Click it to save the settings.
Alias From WAN Interface – The alias IP setting can be
specified from existed WAN IP alias.
Alias From Manual Input – The alias IP setting can be
specified manually. The Alias Interface is not necessary for
such method.
Alias Interface –Use the drop down list to choose a WAN
interface profile for the alias IP setting.
Alias – Use the drop down list to choose an alias IP setting
(for Alias From WAN Interface) or type an IP address
manually (for Alias From Manual Input).
Weight –Use the drop down list to choose the one you want.
Vigor2960 Series User’s Guide
83
3. After finished the settings on the Basic page, click the Detail Tab to open the following
dialog.
Available parameters are listed as follows:
Item Description
DNS Parameter
To configure Vigor router as a DNS server, type the related
information for applying the function of DNS.
TTL – It means Time to live of a DNS response. Available
setting range is from 0 to 2147483647.
Refresh – Set the time for the PC in LAN to refresh the data.
Retry – Set the times of retry if the PC fails to contact with
Vigor router before the refreshing expired.
Expire – PC stops responding to the query from Vigor router
when such time setting has expired.
Negative Cache TTL – Set the negative caching time (name
error).
Email – Type the e-mail address of the administrator.
NS Record
This page is used to specify name server which will be used
as DNS server.
Add – Click it to add a new server with specified name and
IP address.
Save – Click it to save the settings.
HOST – Type the domain name of the server. This is
optional. If no information added here, the router will use the
DNS server configured in Domain Name under the Basic tab.
Name Server –Type the URL for the name server which will
be used to receive the DNS query forwarded by HOST.
IP Address – This is optional. If required, simply type the IP
address of the NS record server.
MX Record
This is used to specify the mail server with IP address.
Add –Click it to add a new server with specified name and IP
Vigor2960 Series User’s Guide
84
address.
Save – Click it to save the settings.
Host –Type the name (URL) of the mail server.
Mail Server – Type the name (URL) of the mail server.
IP Address – Type the IP address of the mail server.
Preference – Set a number for the priority of such mail
server.
Additional A
Record
It is used to record the DNS query by IPv4 address.
Add –Click it to add a new host with specified IP address.
Save – Click it to save the settings.
Host –Set a domain name.
IP Address – Type the IP address of the mail server.
AAAA Record
It is used to record the DNS query by IPv6 address.
Add –Click it to add a new host with specified IPv6 address.
Save – Click it to save the settings.
Host – Set a domain name.
IPv6 Address –Type the IPv6 address of the host.
Any query concerning of Host will be forwarded to the server
selected in Reference for advanced process.
CNAME Record
It is used to record the DNS query for CNAME.
Add – Click it to add a new host with specified reference.
Save – Click it to save the settings.
Host – Set a domain name.
Reference – Choose a sub domain name from the drop down
list.
Any query concerning of Host will be forwarded to the server
selected in Reference for advanced process.
4. Click Apply. A new profile will be added on the page.
You can create sub-domain by clicking
on the left side of the selected inbound load
balance profile. A sub-domain setting page will appear for you to add new profile.
Note that the configuration is similar to the way stated on the above steps.
Vigor2960 Series User’s Guide
85
4
4
.
.
1
1
.
.
2
2
.
.
2
2
I
I
n
n
b
b
o
o
u
u
n
n
d
d
L
L
o
o
a
a
d
d
B
B
a
a
l
l
a
a
n
n
c
c
e
e
O
O
p
p
t
t
i
i
o
o
n
n
s
s
This page is used for configuring detailed Domain Name Server settings. Open
WAN>>Load Balance and click the Inbound Load Balance Options tab.
Each item will be explained as follows:
Item Description
Only accept query in
access list
If it is enabled, Vigor router only accepts DNS queries
coming from the IP addresses or subnets in the Access List.
Access List – Display a table of IP address(es) with
subnet(s).
Add – Create an IP address with subnet mask.
Allow recursion
(external domain) query
If it is enabled, Vigor router will reply all DNS queries even
if querying an external domain which is NOT set in inbound
load balance page.
Apply
Save and activate the settings.
Vigor2960 Series User’s Guide
86
4
4
.
.
1
1
.
.
3
3
S
S
w
w
i
i
t
t
c
c
h
h
This page allows you to configure Mirroring Port, Mirrored Port, enable/disable WAN
interface, and configure 802.1Q VLAN ID for different WAN interfaces, and so on.
Vigor2960 Series User’s Guide
87
4
4
.
.
1
1
.
.
3
3
.
.
1
1
8
8
0
0
2
2
.
.
1
1
Q
Q
V
V
L
L
A
A
N
N
Packets passing through the WAN interface might be tagged or untagged with VLAN ID
number. It depends on the setting configured in this page for VLAN ID configured in WAN
>>General Setup>>Profile relates to the VLAN ID setting configured here.
This page simply displays current status of 802.1Q VALN setting profiles.
Each item will be explained as follows:
Item Description
Refresh
Click it to reload this page.
VLAN ID
Display the VLAN ID number.
Member
Display number of the WAN interface for the packets
tagged with such VLAN ID number to pass through.
Untag
Display number of the WAN interface for the VLAN ID
will be untagged for packets passing through the WAN
interface selected.
Vigor2960 Series User’s Guide
88
4
4
.
.
1
1
.
.
3
3
.
.
2
2
M
M
i
i
r
r
r
r
o
o
r
r
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
The administrator can monitor all the packets passing through mirrored port with the
mirroring port. It is useful for the administrator to analyze the troubles on Network.
Available parameters are listed as follows:
Item Description
Enable This Profile
Check the box to enable the Mirror function for the switch.
Mirroring Port
Select a port for the administrator to use for viewing traffic
sent from mirrored ports.
Mirrored Port
Select a port to make the packets passing through it
monitored by the administrator.
Apply
Click it to save the configuration.
Cancel
Click it to discard the settings configured in this page.
Vigor2960 Series User’s Guide
89
4
4
.
.
1
1
.
.
3
3
.
.
3
3
I
I
n
n
t
t
e
e
r
r
f
f
a
a
c
c
e
e
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
This page allows you to modify the status (enable / disable), duplex (Half/Full), speed and
802.3az for the WAN ports respectively.
Each item will be explained as follows:
Item Description
Edit
Choose the interface listed below and click the Edit button
to modify the settings. A pop up window will appear for you
to change the settings.
Interface – Display the name of WAN interface.
Enable – Check it to enable such interface.
Speed – Use the drop down list to specify the transmission
rate (Auto, 10M, 100M, 1000M,
1000M-Disable-Auto-Negotiation or
100M-Disable-Auto-Negotiation) for such interface.
802.3az – It is a function of energy-efficient Ethernet.
It can detect the network traffic automatically to adjust the
power output and let Vigor2960 save the energy during the
Vigor2960 Series User’s Guide
90
period of low traffic. Click Enable to activate the
power/energy saving function if required..
Apply – Click it to save and exit the dialog.
Cancel – Click it to exit the dialog without saving anything.
Refresh
Renew current web page.
Interface
Display the name of the WAN port on the router.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Duplex
Display the duplex used (full or half) by such profile.
Speed
Display the transmission rate (e.g., 1000M) for such
interface.
Flow Control
Display such function is enabled or disabled.
802.3az
Display such function is enabled or disabled.
4
4
.
.
2
2
L
L
A
A
N
N
Local Area Network (LAN) is a group of subnets regulated and ruled by router. The design
of network structure is related to what type of public IP addresses coming from your ISP.
The most generic function of Vigor router is NAT. It creates a private subnet of your own.
As mentioned previously, the router will talk to other public hosts on the Internet by using
public IP address and talking to local hosts by using its private IP address. What NAT does
is to translate the packets from private IP address to public IP address to forward the right
packets to the right host and vice versa. Besides, Vigor router has a built-in DHCP server
that assigns private IP address to each local host.
Vigor2960 Series User’s Guide
91
4
4
.
.
2
2
.
.
1
1
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
This page allows you to set LAN profiles for PCs in LAN. Settings of DHCP, DHCP Relay,
RADVD and DHCPv6 settings are generated automatically by the system when the LAN
profile is created. You can edit these settings by switching into each tab individually.
Note: One LAN profile shall be enabled at least to keep the normal operation. The default
LAN profile named “lan1” shall not be deleted. Otherwise, the system might be damaged. If
such file is deleted due to careless, please reset your router to restore the default setting.
4
4
.
.
2
2
.
.
1
1
.
.
1
1
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
This page allows you to enable the profile, give a brief explanation for such profile, specify
the VLAN ID, specify MAC address, and choose protocol type for such profile.
Each item will be explained as follows:
Item Description
Add
Add a new LAN profile.
Edit
Modify the selected LAN profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected LAN profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page
Profile Number Limit
Display the total number of the profiles to be created.
Profile (max length:7)
Display the name of the LAN profile.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Description
Display the brief explanation for the LAN profile.
Vigor2960 Series User’s Guide
92
VLAN ID
Display the VLAN ID configured for the LAN profile.
IPv4 Protocol
Display the IPv4 protocol type for the LAN profile.
IP Address
Display the IP address for such LAN profile.
Subnet Mask
Display the subnet mask for such LAN profile.
DHCP Server
Display the status (Enable/Disable) of the DHCP server.
IPv6 Protocol
Display the IPv6 protocol type for the LAN profile.
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
a
a
n
n
e
e
w
w
L
L
A
A
N
N
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open LAN>>General Setup and click the General Setup tab.
2. Click the Add button to open the following dialog. Different protocol type selected will
bring up different configuration web page.
Available parameters are listed as follows:
Item Description
Profile
(max length:7)
Type the name of the LAN profile.
Enable
Check this box to enable such profile.
Description
Type the description for the new LAN profile.
VLAN ID
Type a number as the VLAN ID to make the data be
identified while performing data transmission.
Priority(802.1p)
Type the packet priority number for such profile. The range is
from 0 to 7.
Default MAC
Enable – Click it to enable the default MAC address for such
Vigor2960 Series User’s Guide
93
Address
profile.
Disable – Click it to type the MAC address manually for such
profile.
MAC Address
If Default MAC address is disabled, please specify a MAC
address manually with the format like “00:1d:aa:b2:69:80”.
IPv4 Protocol
Display the fixed type (static) for the IPv4 protocol for such
profile.
Mode
Choose NAT or ROUTING as the operation mode for such
profile.
IP Address
Type the IP address (with the format like 192.168.1.25) of the
router for the LAN profile.
Subnet Mask
Use the drop down list to choose a suitable mask for the LAN
profile.
Connection
Detection Mode
Select a detecting mode for this LAN interface.
This feature is used to operate in coordination with Policy
Route profile. Vigor system can choose suitable router policy
through connection detection automatically.
Gateway IP
Address
It is available when ARP is selected as Connection Detection
Mode.
Type a public gateway address. Vigor router will detect the
destination IP specified here automatically when such LAN
profile is used. If the IP is not detected, the connection status
for LAN will be shown as “down”.
Connection
Detection Interval
It is available when ARP is selected as Connection Detection
Mode.
Assign an interval period of time for each detecting.
Connection
Detection Retry
It is available when ARP is selected as Connection Detection
Mode.
Assign detecting times to ensure the connection of the LAN
interface. After passing the times you set in this field and no
reply received by the router, the connection of LAN interface
will be regarded as breaking down.
DHCP Server
Enable – Click it to enable the DHCP server. The DHCP
server will assign the IP address randomly for the LAN user.
The range of the IP addresses must be defined in DHCP Start
IP and DHCP End IP.
Disable – Click it to disable the DHCP server.
DHCP Start IP
Type an IP address as the starting point for DHCP server.
DHCP End IP
Type an IP address as the ending point for DHCO server.
DHCP DNS
Set the private IP address for DNS server. If this field is
blank, users on LAN will treat Vigor2960 as the DNS server.
Vigor2960 Series User’s Guide
94
Add – Click it to add a new IP address for DNS server.
Save – Click it to save the setting.
DHCP IP Lease
Time
Set a lease time for the DHCP server. The time unit is minute.
DHCP Routers
In general, this box will be blank. It means Vigor2960 will be
regarded as the gateway for the user.
However, if you want to use other gateway, please assign the
IP address in this field.
DHCP Next Server
Type the IP address of the secondary DHCP server.
DHCP Options
DHCP packets can be processed by adding option number
and data information when such function is enabled.
Each DHCP option is composed by an option number with
data. For example,
Option number:100
Data: abcd
When such function is enabled, the specified values for
DHCP option will be seen in DHCP reply packets.
Add – Click it to add a new DHCP option profile.
Save – Click it to save the setting.
DHCP Option – Use the drop down list to choose the one
you want.
Value – Type the content of the data to be processed by the
function of DHCP option.
Specify Remote
Dial-in IP
Enable – Check the box to enable this function. Remote
clients within the range specified below can access into
Vigor2960 WUI.
Gateway IP
Address
Type a public gateway address for such WAN profile.
More Subnet
Different subnets can be created under one LAN profile.
Specify other subnets which might be needed in the future.
Vigor2960 Series User’s Guide
95
Add – Click it to add a new subnet mask with IP address and
specified mode.
Save – Click it to save the settings.
IP – Type the IP address if you click Add for adding a new
entry.
Subnet Mask – Use the drop down list to choose the one you
want.
Mode – Specify NAT or Routing as the mode.
DHCP – Click Enable to activate the DHCP function on such
subnet. When it is enabled, you have to specify the IP range
to be assigned by the DHCP server for such subnet.
Start IP – Type an IP address as a starting point.
End IP – Type an IP address as an ending point.
DNS Redirection
Enable – It can redirect DNS queries from such LAN profile
to router's DNS Server. It must work with LAN DNS
function.
IPv6 Protocol
It defines the IPv6 connection types for LAN interface.
Possible types contain Link-Local, Static and DHCP-SLA.
Except Link-Local, each type requires different parameter
settings.
Link-Local- Link-Local address is used for communicating
with neighbouring nodes on the same link. It is defined by the
address prefix fe80::/10. You don't need to setup Link-Local
address manually for it is generated automatically according
to your MAC Address.
Static –This type allows you to setup static IPv6 address for
LAN.
DHCP-SLA- DHCPv6 client mode would use IA_NA option
of DHCPv6 protocol to obtain IPv6 address from server.
IPv6 Address
If Static is chosen as IPv6 Protocol, please type the IPv6
address in this field.
IPv6 Prefix Length
Display the IPv6 prefix length.
DHCPv6 SLA
WAN Interface
If DHCP-SLA is chosen as IPv6 Protocol, please choose one
of the WAN profiles in this field.
DHCPv6 SLA ID
The ID number set here is used by an individual organization
to create its own local addressing hierarchy and to identify
subnets.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
3. When you finish the above settings, please click Apply to save the configuration and
exit the dialog.
Vigor2960 Series User’s Guide
96
4
4
.
.
2
2
.
.
1
1
.
.
2
2
D
D
H
H
C
C
P
P
R
R
e
e
l
l
a
a
y
y
DHCP stands for Dynamic Host Configuration Protocol. The router by factory default acts a
DHCP server for your network so it automatically dispatch related IP settings to any local
user configured as a DHCP client. It is highly recommended that you leave the router
enabled as a DHCP server if you do not have a DHCP server for your network.
If you want to use another DHCP server in the network other than the Vigor Router’s, you
can let Relay Agent help you to redirect the DHCP request to the specified location.
This page allows users to specify which subnet that DHCP server is located that the relay
agent should redirect the DHCP request to.
Each item will be explained as follows:
Item Description
Edit
Modify the selected LAN profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Refresh
Renew current web page.
Profile
Display the name of the LAN profile.
Enable
Display the status of the profile. False means disabled; True
means enabled.
DHCP Server Location
Display the LAN or WAN profile for the DHCP server.
DHCP Server IP
Display the IP address of DHCP server.
DHCP Relay Agent IP
Display the IP address of DHCP relay agent server.
Vigor2960 Series User’s Guide
97
H
H
o
o
w
w
t
t
o
o
e
e
d
d
i
i
t
t
a
a
L
L
A
A
N
N
p
p
r
r
o
o
f
f
i
i
l
l
e
e
f
f
o
o
r
r
D
D
H
H
C
C
P
P
R
R
e
e
l
l
a
a
y
y
1. Open LAN>>General Setup and click the DHCP Relay tab.
2. Choose one of the LAN profiles by clicking on it and click the Edit button to open the
following dialog.
Available parameters are listed as follows:
Item Description
Profile
Display the name of the LAN profile.
Enable
Check this box to enable this profile.
DHCP Server
Location
Choose the interface for the DHCP server.
DHCP Server IP
Type the IP address of DHCP Server.
DHCP Relay Agent
IP
Type the IP address of DHCP Relay Agent.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
3. When you finish the above settings, please click Apply to save the configuration and
exit the dialog.
4. The LAN profile has been edited.
Vigor2960 Series User’s Guide
98
4
4
.
.
2
2
.
.
1
1
.
.
3
3
I
I
n
n
t
t
e
e
r
r
-
-
L
L
A
A
N
N
R
R
o
o
u
u
t
t
e
e
Inter-LAN route profile is created for making the users in different LAN be able to
communicate with each other.
Each item will be explained as follows:
Item Description
Enable Inter-LAN
Route
In default, such function is disabled.
Check the box of Enable Inter-LAN Route to create route
profile. However, if there is no route profile created, all of
LAN users can communicate with each other.
Using Route Group
After checking Enable Inter-LAN Route, check this box to
specify which LANs are allowed to communicate with each
other.
For example, LAN1 and LAN2 are set as members in
group1; LAN3 and LAN4 are set as members in group2.
LAN1 can communicate with LAN2 but not LAN3/LAN4.
LAN3 can communicate with LAN4 but not LAN1/LAN2.
Add
Add a new LAN group profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a profile, simply select the one you want to delete
and click the Delete button.
Move Up / Move Down
Move the selected profile up or down.
Rename
Allow to modify the selected profile name.
Refresh
Renew current web page.
Vigor2960 Series User’s Guide
99
Profile Number Limit
Display the total number of the profiles to be created.
Group Profile
Display the name of the group profile.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Action
Display the action specified for such group profile.
Selected LANs
Display LAN profiles grouped under such group profile.
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
a
a
n
n
I
I
n
n
t
t
e
e
r
r
-
-
L
L
A
A
N
N
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open LAN>>General Setup and click the Inter-LAN Route tab.
2. Click the Add button to open the following dialog.
Available parameters are listed as follows:
Item Description
Group Name
Type the name for such group profile.
Enable
Check this box to enable this profile.
Action
Accept – Users in selected LANs can communicate with
each other.
Block – Users in selected LANs are unable to communicate
with each other.
Selected LANs
Choose LAN profiles by using the drop down list.
Users listed in the selected LAN will be influenced by the
action defined above.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
3. When you finish the above settings, please click Apply to save the configuration and
exit the dialog.
4. The inter-LAN route profile has been created.
Vigor2960 Series User’s Guide
100
4
4
.
.
2
2
.
.
1
1
.
.
4
4
R
R
A
A
D
D
V
V
D
D
The router advertisement daemon (radvd) sends Router Advertisement messages, specified
by RFC 2461, to a local Ethernet LAN periodically and when requested by a node sending a
Router Solicitation message. These messages are required for IPv6 stateless
auto-configuration.
Each item will be explained as follows:
Item Description
Edit
Modify the selected LAN profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Refresh
Renew current web page.
Profile
Display the name of the LAN profile.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Advertisement Lifetime
Display the lifetime value.
The lifetime associated with the default router in units of
minutes, ranging from 10 ~ 150. It is used to control the
lifetime of the prefix. A lifetime of 0 indicates that the router
is not a default router and should not appear on the default
router list.
Vigor2960 Series User’s Guide
101
H
H
o
o
w
w
t
t
o
o
e
e
d
d
i
i
t
t
a
a
L
L
A
A
N
N
p
p
r
r
o
o
f
f
i
i
l
l
e
e
f
f
o
o
r
r
R
R
A
A
D
D
V
V
D
D
1. Open LAN>>General Setup and click the RADVD tab.
2. Choose one of the LAN profiles by clicking on it and click the Edit button to open the
following dialog.
Available parameters are listed as follows:
Item Description
Profile
Display the name of the LAN profile.
Enable
Check this box to enable this profile.
Advertisement
Lifetime
Type a value for advertisement lifetime.
The lifetime associated with the default router in units of
minutes, ranging from 10 ~ 150. It is used to control the
lifetime of the prefix. A lifetime of 0 indicates that the router
is not a default router and should not appear on the default
router list.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
3. When you finish the above settings, please click Apply to save the configuration and
exit the dialog.
4. The LAN profile has been edited.
Vigor2960 Series User’s Guide
102
4
4
.
.
2
2
.
.
1
1
.
.
5
5
D
D
H
H
C
C
P
P
6
6
DHCP6 Server could assign IPv6 address to PC according to the Start/End IPv6 address
configuration.
Each item will be explained as follows:
Item Description
Edit
Modify the selected LAN profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Refresh
Renew current web page.
Profile
Display the name of the LAN profile.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Mode
Display the mode (automatic setting or manual setting)
specified for such profile.
Start IP
Display the starting IP address of the IP address pool for
DHCP server.
End IP
Display the ending IP address of the IP address pool for
DHCP server.
DNS
Display the private IP address for DNS server.
H
H
o
o
w
w
t
t
o
o
e
e
d
d
i
i
t
t
a
a
L
L
A
A
N
N
p
p
r
r
o
o
f
f
i
i
l
l
e
e
f
f
o
o
r
r
D
D
H
H
C
C
P
P
v
v
6
6
1. Open LAN>>General Setup and click the DHCPv6 tab.
2. Choose one of the LAN profiles by clicking on it and click the Edit button to open the
following dialog.
Vigor2960 Series User’s Guide
103
Available parameters are listed as follows:
Item Description
Profile
Display the name of the LAN profile.
Enable
Check this box to enable this profile.
Mode
Choose Automatic Setting or Manual Setting.
Automatic Setting – It is not necessary to configure Start
IP, End IP and DNS setting. The system will assign suitable
address automatically.
Manual Setting – You should type the Start IP address and
End IP address manually.
Start IP
Set the starting IP address of the IP address pool for DHCP
server. The format the IP address shall be similar to the
following example:
2000:0000:0000:0000:0000:0000:0000:10 or 2000::10.
End IP
Set the ending IP address of the IP address pool for DHCP
server. The format the IP address shall be similar to the
following example:
2000:0000:0000:0000:0000:0000:0000:10 or 2000::10.
DNS
It is available when Manual Setting is selected as Mode.
Set the private IP address for DNS server. If this field is
blank, users on LAN will treat Vigor2960 as the DNS server.
Vigor2960 Series User’s Guide
104
Add – Click it to add a new IP address for DNS server.
Save – Click it to save the setting.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
3. When you finish the above settings, please click Apply to save the configuration and
exit the dialog.
4. The LAN profile has been edited.
4
4
.
.
2
2
.
.
2
2
P
P
P
P
P
P
o
o
E
E
S
S
e
e
r
r
v
v
e
e
r
r
This feature makes the router working like an ISP, providing PPPoE connections to LAN
PCs. The only difference is that local PCs don't need an ADSL modem.
There are several advantages of using PPPoE connections on the LAN. Firstly, the PPPoE
server can secure the LAN PC connections with username/password authentication.
Secondly, it can prevent ARP attack by nature. Thirdly, the system administrator can
configure quota (time/traffic based) for each user as ISP does.
Vigor2960 Series User’s Guide
105
4
4
.
.
2
2
.
.
2
2
.
.
1
1
O
O
n
n
l
l
i
i
n
n
e
e
C
C
l
l
i
i
e
e
n
n
t
t
S
S
t
t
a
a
t
t
u
u
s
s
This page displays general information for PPPoE server; allows you to disconnect the
network connection to PPPoE server.
Each item will be explained as follows:
Item Description
Disconnect
Click it to disconnect the profile connection.
Auto Refresh
Specify the interval of refresh time to obtain the latest status.
The information will update immediately when the Refresh
button is clicked.
Refresh
Renew current web page.
MAC Address
Display the MAC address of the client’s host.
User Name
Display the user name used to access into the PPPoE server.
IP Address
Display the IP address of the client’s host.
Up Time
Display the time that the PPPoE connection built.
RX Bytes
Display the total amount of received packets.
TX Bytes
Display the total amount of transmitted packets.
Vigor2960 Series User’s Guide
106
4
4
.
.
2
2
.
.
2
2
.
.
2
2
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
t
t
i
i
n
n
g
g
Available parameters are listed as follows:
Item Description
PPPoE Server
Disable – Click it to disable this function.
Enable – Click it to enable the function of PPPoE server.
PPPoE User Isolation
Disable – Click it to disable this function.
Enable – Click it to isolate the PPPoE users who access into
Internet via Vigor router.
Deny Internet Access
Except PPPoE User
Disable –Click it to disable this function.
Enable – If you click Enable, only the PPPoE user can
access into Internet.
Access Concentrator
(AC) Name
Type the name which will be reported as the access
concentrator name.
Service Name
Type a specific string for authentication.
It causes the named service to be advertised in a Service
Name tagged in the PADO (PPPoE Active Discovery
Offer) frame.
Primary DNS
Type an IP address as primary DNS.
Secondary DNS
Type another IP address as secondary DNS.
PPPoE Server
Authentication Type
Choose the authentication type for PPPoE server.
Any PPPoE user shall pass the authentication of PPPoE
Vigor2960 Series User’s Guide
107
server and access into Internet.
User Authentication
Type
Users in LAN can access into Internet through Vigor router
with RADIUS, LDAP or local authentication. Specify the
type for the users.
LDAP profiles
It is available when LDAP is selected as User
Authentication Type.
If you choose LDAP as the authentication type, use the drop
down list to specify the LDAP profile.
DHCP From
It is available when RADIUS is selected as User
Authentication Type.
DHCP Relay
Enable - If you want to use another DHCP server in the
network other than the Vigor Router’s, you can let Relay
Agent help you to redirect the DHCP request to the specified
location.
DHCP Server Location – Choose one of the interfaces for
DHCP server.
DHCP Server IP Address - Set the IP address of the DHCP
server you are going to use so DHCP Relay can help to
forward the DHCP request to the DHCP server.
Apply
Click it to save and exit the dialog.
Cancel
Click it to discard current page modification.
Vigor2960 Series User’s Guide
108
4
4
.
.
2
2
.
.
2
2
.
.
3
3
H
H
i
i
s
s
t
t
o
o
r
r
y
y
This page displays records of connection status (up or down) and the connection time and the
name of the user who accesses into PPPoE server of such router.
Each item will be explained as follows:
Item Description
User Name
Display the user name used to access into the PPPoE server.
Action
Display the connection status (up or down) of the user
account.
Time
Display the connection time.
If the action is “Down”, such field will display the total
connection time.
If the action is “up”, such field will display the time point
that the user account access into the PPPoE server.
Vigor2960 Series User’s Guide
109
4
4
.
.
2
2
.
.
3
3
S
S
w
w
i
i
t
t
c
c
h
h
This page allows you to configure Mirroring Port, Mirrored Port, enable/disable LAN
interface, and configure 802.1Q VLAN ID for different LAN interfaces, and so on.
4
4
.
.
2
2
.
.
3
3
.
.
1
1
8
8
0
0
2
2
.
.
1
1
Q
Q
V
V
L
L
A
A
N
N
Virtual LANs (VLANs) are logical, independent workgroups within a network. These
workgroups communicate as if they had a physical connection to the network. However,
VLANs are not limited by the hardware constraints that physically connect traditional LAN
segments to a network. As a result, VLANs allow the network manager to segment the
network with a logical, hierarchical structure. VLANs can define a network by application or
department. For instance, in the enterprise, a company might create one VLAN for
multimedia users and another for e-mail users; or a company might have one VLAN for its
Engineering Department, another for its Marketing Department, and another for its guest
who can only use Internet not Intranet. VLANs can also be set up according to the
organization structure within a company. For example, the company president might have
his own VLAN, his executive staff might have a different VLAN, and the remaining
employees might have yet a different VLAN. VLANs can also set up according to different
company in the same building to save the money and reduce the device establishment.
User can select some ports to add into a VLAN group. In one VLAN group, the port number
can be single one or more.
The purpose of VLAN is to isolate traffic between different users and it can provide better
security application.
Each item will be explained as follows:
Item Description
Add
Add a new VLAN ID setting.
Edit
Modify the selected VLAN ID setting.
To edit VALN ID setting, simply select the one you want to
modify and click the Edit button. The edit window will
appear for you to modify the corresponding settings for the
selected rule.
Delete
Remove the selected VLAN ID setting.
Vigor2960 Series User’s Guide
110
To delete a VLAN ID setting, simply select the one you want
to delete and click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number of the profiles to be created.
VLAN ID
Display the VLAN ID number.
Member
Display the LAN interface that is used to access into Internet
for such LAN profile with the VLAN ID number.
Untag
Display the LAN interface that packets transmitted to
Internet through such LAN profile with the VLAN ID
number is tagged or untagged.
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
a
a
n
n
e
e
w
w
8
8
0
0
2
2
.
.
1
1
Q
Q
V
V
L
L
A
A
N
N
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open LAN>>Switch and click the 802.1Q VLAN tab.
2. Click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
VLAN ID
Type the number as the VLAN ID. Type a number used for
identification on VLAN for your computer. Later, you have
to type the same ID number for each PC which wants to be
grouped within the same VLAN group.
Member
Determine which LAN interface can be used to access into
Internet for such LAN profile with the VLAN ID number.
If the icon
appears in front of the drop down list, it means
one of the selections has been chosen by other profile. You
cannot choose it. If you want to specify that one for such
profile, please exit this dialog to release that selection from
its original VLAN profile, than return this page and make the
selection again.
Untag
Determine if the packets transmitted to Internet through such
LAN profile with the VLAN ID number is tagged or not.
If the icon
appears in front of the drop down list, it means
Vigor2960 Series User’s Guide
111
one of the selections has been chosen by other profile. You
cannot choose it. If you want to specify that one for such
profile, please exit this dialog to release that selection from
its original VLAN profile, than return this page and make the
selection again.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
4. Enter all of the settings and click Apply. The new profile will be added on the screen.
4
4
.
.
2
2
.
.
3
3
.
.
2
2
M
M
i
i
r
r
r
r
o
o
r
r
Vigor2960 supports port mirroring function in LAN interfaces. This mechanism helps
manager track the network errors or abnormal packets transmission without interrupting the
flow of data access the network. By the way, user can apply this function to monitor all
traffics which user needs to check.
There are some advantages supported in this feature. Firstly, it is more economical without
other detecting equipments to be set up. Secondly, it may be able to view traffic on one or
more ports within a VLAN at the same time. Thirdly, it can transfer all data traffics to be
mirrored to one analyzer connect to the mirroring port. Last, it is more convenient and easy
to configure in user’s interface.
Available parameters are listed as follows:
Item Description
Enable
Check the box to enable the Mirror function for the switch.
Mirroring Port
Select a port to view traffic sent from mirrored ports.
Mirrored Port
Select which port is necessary to be mirrored.
Vigor2960 Series User’s Guide
112
Refresh
Renew current web page.
Apply
Click it to save the settings.
4
4
.
.
2
2
.
.
3
3
.
.
3
3
I
I
n
n
t
t
e
e
r
r
f
f
a
a
c
c
e
e
This page allows you to modify the status (enable / disable), duplex (Half/Full), speed,
802.3az (enable / disable) for the LAN ports respectively.
Each item will be explained as follows:
Item Description
Edit
Choose the interface listed below and click the Edit button to
modify the settings. A pop up window will appear for you to
change the settings.
Refresh
Renew current web page.
Interface
Display the profile name of the interface.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Duplex
Display the duplex used (full or half) by such profile.
Speed
Display the transmission rate (e.g., Auto) for such profile.
Flow Control
Display such function is enabled or disabled.
802.3az
Display such function is enabled or disabled.
Note
Display addition information for such interface.
H
H
o
o
w
w
t
t
o
o
e
e
d
d
i
i
t
t
a
a
n
n
I
I
n
n
t
t
e
e
r
r
f
f
a
a
c
c
e
e
p
p
r
r
o
o
f
f
i
i
l
l
e
e
Vigor2960 Series User’s Guide
113
1. Open LAN>>Switch and click the Interface tab.
2. Please select a profile and click the Edit button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Interface
Display the name of LAN interface profile.
Enable
Check the box to enable the Mirror function for the switch.
Duplex
Choose Half or Full for the speed specified below.
Speed
Use the drop down list to specify the transmission rate for
such profile.
If Auto is selected, it is not necessary to specify the Duplex
setting.
802.3az
It is a function of energy-efficient Ethernet.
It can detect the network traffic automatically to adjust the
power output and let Vigor2960 save the energy during the
period of low traffic.
Note
Display addition information for such interface.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
4. Enter all of the settings and click Apply. The profile has been edited.
Vigor2960 Series User’s Guide
114
4
4
.
.
2
2
.
.
3
3
.
.
4
4
J
J
u
u
m
m
b
b
o
o
F
F
r
r
a
a
m
m
e
e
The purpose of Jumbo Frame is to increase the transmission rate for the packets coming from
LAN via enlarging data size.
MTU (Max Transmit Unit) determines the largest size of a packet. When a packet with large
size is transmitted through Vigor router, the router will cut it into several segments to
facilitate the transmission. It always takes a lot of time. To reduce the sending number of
times, wasted bandwidth and transmission time, use Jumbo Frame to enlarge the size of the
data and speed up the transmission rate for packets coming from LAN.
Vigor2960 Series User’s Guide
115
4
4
.
.
2
2
.
.
4
4
B
B
i
i
n
n
d
d
I
I
P
P
t
t
o
o
M
M
A
A
C
C
This function is used to bind the IP and MAC address in LAN to have a strengthen control in
network. When this function is enabled, all the assigned IP and MAC address binding
together cannot be changed. If you modified the binding IP or MAC address, it might cause
you not access into the Internet.
This page allows you to configure related settings for the function of Bind IP to MAC.
Each item will be explained as follows:
Item Description
ARP Table
This table is the LAN ARP table of this router. The
information for IP and MAC will be displayed in this field.
Each pair of IP and MAC address listed in ARP table can
be selected and added to IP Bind List by clicking Move on
IP Bind List
.
Select All - Allow you to choose all the items listed in ARP
Table.
Move -Move the selected item to IP Bind List.
Refresh - It is used to refresh the ARP table. When there is
one new PC added to the LAN, you can click this link to
obtain the newly ARP table information.
Mode -
Enable - Choose it to invoke this function.
However, IP/MAC which is not listed in IP Bind
List also can connect to Internet.
Disable - Choose it to disable this function. All
the settings on this page will be invalid.
Strict_Bind – Choose it to lock the connection
of the IP/MAC which is not listed in IP Bind
List.
Interface – When Strict Bind is selected, specify an
interface. The default is “lan1”.
Vigor2960 Series User’s Guide
116
Syslog - When Strict Bind is selected, you can check the
box to save records of Bind IP to MAC in Syslog.
Apply – Click it to save the setting.
IP Address - Display the IP address of one device.
MAC Address - Display the MAC address of the device.
Bind Table
It displays a list for the IP bind to MAC information.
Add -It allows you to add one pair of IP/MAC address and
display on the table of IP Bind List.
Edit -It allows you to edit and modify the selected IP
address and MAC address that you create before.
Delete -You can remove any item listed in IP Bind List.
Simply click and select the one, and click Delete. The
selected item will be removed from the IP Bind List.
Select All -Choose all of the selections at one time.
Rename -Allow to modify the selected profile name.
Export – The list for the IP bind to MAC information can
be stored as a text file. Such file can be imported by other
Vigor router. Thus, it is not necessary for that router to
create Bind IP to MAC one by one.
Import – Click it to import an IP bind to MAC information
(e.g., 123.txt) obtained from other Vigor router and to be
applied by Vigor2960.
Profile - Display the name of the profile.
IP Address - Display the IP address specified for the
profile.
MAC - Display the MAC address specified for the profile.
Comment – Display the brief description for such profile.
H
H
o
o
w
w
t
t
o
o
c
c
o
o
n
n
f
f
i
i
g
g
u
u
r
r
e
e
B
B
i
i
n
n
d
d
I
I
P
P
t
t
o
o
M
M
A
A
C
C
1. Open LAN>>Bind IP to MAC.
2. Use the drop down Mode menu to specify a suitable mode.
There are three modes offered for you to choose.
Vigor2960 Series User’s Guide
117
Disable – The function of Bind IP to MAC is disabled.
Enable – Specified IP addresses on the Bind Table will be reserved for the device
with bind MAC address. Other devices which are not listed on the Bind Table
shall still get the IP address from DHCP server.
Strict_Bind – Only specified IP addresses will be assigned to the device with
bind MAC address. Other devices which are not listed on the Bind Table shall
still NOT get the IP address from DHCP server.
3. Click Add on Bind Table.
4. The following dialog appears.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the profile.
IP Address
Type the IP address that will be used for the specified MAC
address.
MAC
Type the MAC address that is used to bind with the assigned
IP address.
Comment
Type a brief description for such profile.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
5. Enter all of the settings and click Apply.
Vigor2960 Series User’s Guide
118
6. A new profile has been added onto Bind Table.
Vigor2960 Series User’s Guide
119
4
4
.
.
2
2
.
.
5
5
L
L
A
A
N
N
D
D
N
N
S
S
LAN DNS is a simple version of DNS server. It is not necessary for the user to build another
DNS server in LAN. With such feature, the user can configure some services (such as ftp,
www or database) with domain name which is easy to be accessed.
Each item will be explained as follows:
Item Description
Add
Add a new VLAN ID setting.
Edit
Modify the selected VLAN ID setting.
To edit VALN ID setting, simply select the one you want to
modify and click the Edit button. The edit window will
appear for you to modify the corresponding settings for the
Vigor2960 Series User’s Guide
120
selected rule.
Delete
Remove the selected VLAN ID setting.
To delete a VLAN ID setting, simply select the one you want
to delete and click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number of the profiles to be created.
Profile
Display the name of the profile.
Enable
Display if such profile is enabled (true) or disabled (false).
Domain Name
Display the domain name configured for such profile.
Alias Domain Name
Display the alias domain name for such profile.
Mapping
Display the IP address that domain name and domain name
alias will be mapped to.
Apply to
Display which type (Specified LAN or All LANs) the LAN
DNS will be applied to.
LAN Profile
Display the LAN profile selected for applying LAN DNS
configuration.
Vigor2960 Series User’s Guide
121
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
a
a
n
n
e
e
w
w
L
L
A
A
N
N
D
D
N
N
S
S
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open LAN>>LAN DNS.
2. Click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type a name for such profile.
Status
Check the box to enable such profile.
Domain Name
Type the domain name for such profile.
Alias Domain Name
Type several domain names in this field. LAN DNS will
redirect both Domain name and Alias Domain Name to an
assigned IP.
For example, Domain Name is set with “www.draytek.com”,
and the Alias Domain Name is set as “www.dray.com”. If
the IP address is set with “192.168.1.123”, then both
“www.draytek.com” and “www.dray.com” will be directed
to “192.168.1.123”.
Type
When you choose IP, you need to type IP address and/or
IPv6 address as the mapping target.
When you choose CNAME, you need to type the content
(domain) of CNAME as the mapping target.
Please choose the suitable type to determine which IP
Vigor2960 Series User’s Guide
122
address or CNAME will be mapped by the above domain
name/alias domain name.
When you choose FORWARD, you need to type the IP
address of DNS server as the mapping target.
IP Address
Type the IP address in this field. Then, the above domain
and/or alias domain name will be mapped to such IP address.
IPv6 Address
Type the IPv6 address in this field. Then, the above domain
and/or alias domain name will be mapped to such IPv6
address.
CNAME
Type another domain name in this field. Then, the above
domain and/or alias domain name will be mapped to such
specified domain.
DNS Server
Type the IP address of the DNS server.
Applied to
LAN DNS can be applied to specified LAN interfaces or all
of the LAN interfaces.
LAN Profile – When you choose Specified LANs, it is
necessary to specify at least one LAN profile in this field.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
4. Enter all of the settings and click Apply. The new profile will be added on the screen.
Vigor2960 Series User’s Guide
123
4
4
.
.
3
3
R
R
o
o
u
u
t
t
i
i
n
n
g
g
This menu contains Load Balance Pool, Static Route, Policy Route, Default Route, RIP
Configuration, OSPF Configuration and BGP Configurations.
4
4
.
.
3
3
.
.
1
1
L
L
o
o
a
a
d
d
B
B
a
a
l
l
a
a
n
n
c
c
e
e
P
P
o
o
o
o
l
l
Vigor2960 supports a load balancing function. It can assign traffic with protocol type, IP
address for specific host, a subnet of hosts, and port range to be allocated in WAN interface.
User can assign traffic category and force it to go to dedicate network interface based on the
following web page setup.
In the Routing group, click the Load Balance Pool option.
This page allows the user to integrate several WAN profiles as a pool profile specified with
the function of load balance or failover. The profiles configured here will be selected in the
field of Routing >>Default Route page.
Each item will be explained as follows:
Item Description
Add
Add a new pool profile.
Edit
Modify the selected pool profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
Vigor2960 Series User’s Guide
124
pool.
Delete
Remove the selected pool profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
Profile
Display the name of the rule.
Mode
Display the protocol of such rule.
Interface
Display the name of the WAN profiles for Load Balance
rule.
Primary Profile
Display the primary profile configured in Failover page for
such profile.
Backup Profile
Display the backup profile configured in Failover page for
such profile.
There are two modes, Load Balance and Failover, for you to choose as the Pool
configuration. If you choose Load Balance, the tab of Load Balance will be shown which
allows you to configure for different WAN interfaces. If you choose Failover, the tab of
Failover will be displayed which allows you to specify the primary profile and backup
profile for such Pool setting.
Vigor2960 Series User’s Guide
125
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
a
a
p
p
o
o
o
o
l
l
p
p
r
r
o
o
f
f
i
i
l
l
e
e
f
f
o
o
r
r
L
L
o
o
a
a
d
d
B
B
a
a
l
l
a
a
n
n
c
c
e
e
1. Open Routing>>Load Balance Pool.
2. Simply click the Add button to open the following dialog. Type a name for such profile
(e.g., LB_1). Choose Load Balance as the Mode selection.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the profile.
Mode
Choose Load Balance as the Mode selection.
Interface
Click Add. A new line for adding new entry will appear.
Use the drop down list of Interface to choose the WAN
profiles that will be in the Load Balance Pool.
Type the value for Weight.
3. Click Apply. A new profile will be added on the page.
Vigor2960 Series User’s Guide
126
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
a
a
P
P
o
o
o
o
l
l
p
p
r
r
o
o
f
f
i
i
l
l
e
e
f
f
o
o
r
r
B
B
a
a
c
c
k
k
u
u
p
p
Such page allows you to set a backup profile which will be activated when the primary
profile is invalid by any reason.
1. Open Routing >>Load Balance Pool.
2. Simply click the Add button to open the following dialog. Type a name for such profile
(e.g., FL_1). Choose Backup as the Mode selection.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the profile.
Mode
Choose Backup as the Mode selection.
Primary Profile
In default, the system will apply Primary Profile. If Primary
Profile cannot be used any more, the Backup Profile will be
used instead. Use the drop down list to choose the one you
need.
Backup Profile
Use the drop down list to choose the one you need.
3. Click Apply. A new profile will be added on the page.
Vigor2960 Series User’s Guide
127
4
4
.
.
3
3
.
.
2
2
S
S
t
t
a
a
t
t
i
i
c
c
R
R
o
o
u
u
t
t
e
e
When there are several subnets in LAN, a more effective and quicker way for connection is
static route rather than other methods. Simply set rules to forward data from one specified
subnet to another specified subnet.
4
4
.
.
3
3
.
.
2
2
.
.
1
1
S
S
t
t
a
a
t
t
i
i
c
c
R
R
o
o
u
u
t
t
e
e
The router offers IPv4 and IPv6 for you to configure the static route. Both protocols bring
different web pages.
Each item will be explained as follows:
Item Description
Add
Add a new static route setting.
Edit
Modify the selected static route setting.
To edit static route setting, simply select the one you want to
modify and click the Edit button. The edit window will
appear for you to modify the corresponding settings for the
selected rule.
Delete
Remove the selected static route setting.
To delete a static route setting, simply select the one you
want to delete and click the Delete button.
Rename
Allow to modify the selected profile name.
Refresh
Renew current web page.
Profile Number Limit
Display the total number of the profiles to be created.
Profile
Display the name of such static route.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Destination IP Address
Display the IP address for such static route profile.
Subnet Mask
Display the subnet mask for such static route profile.
Gateway
Display the gateway address for such static route profile.
Vigor2960 Series User’s Guide
128
WAN/LAN Profile
Display the subnet / LAN or WAN profile of the gateway.
Metric
Display the distance to the target.
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
a
a
n
n
e
e
w
w
S
S
t
t
a
a
t
t
i
i
c
c
R
R
o
o
u
u
t
t
e
e
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Routing>>Static Routing and click the Static Route tab.
2. Click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the static route profile.
Enable
Check this box to enable such profile.
Destination IP
Address
Type the IP address for such static route profile.
Subnet Mask
Use the drop down list to choose the subnet mask for such
static route profile.
Gateway
Type the gateway address for such static route profile.
WAN/LAN Profile
Choose one of the LAN/WAN profiles of the gateway for
such static route.
Metric
Type the distance to the target (usually counted in hops).
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
5. Enter all of the settings and click Apply. The new profile will be added on the screen.
Vigor2960 Series User’s Guide
129
4
4
.
.
3
3
.
.
2
2
.
.
2
2
I
I
P
P
v
v
6
6
S
S
t
t
a
a
t
t
i
i
c
c
R
R
o
o
u
u
t
t
e
e
For IPv6 protocol, click the IPv6 Static Route tab to configure detailed settings.
Each item will be explained as follows:
Item Description
Add
Add a new static route setting.
Edit
Modify the selected static route setting.
To edit static route setting, simply select the one you want to
modify and click the Edit button. The edit window will
appear for you to modify the corresponding settings for the
selected rule.
Delete
Remove the selected static route setting.
To delete a static route setting, simply select the one you
want to delete and click the Delete button.
Refresh
Renew current web page.
Rename
Allow to modify the selected profile name.
Profile Number Limit
Display the total number of the profiles to be created.
Profile
Display the name of such static route.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Destination IP Address
Display the IP address for such static route profile.
Prefix Length
Display the prefix length of the profile.
Nexthop
Display the nexthop address for such static route profile.
Vigor2960 Series User’s Guide
130
WAN / LAN Profile
Display the subnet LAN or WAN profile of the gateway.
Metric
Display the distance to the target.
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
a
a
n
n
e
e
w
w
I
I
P
P
v
v
6
6
S
S
t
t
a
a
t
t
i
i
c
c
R
R
o
o
u
u
t
t
e
e
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Routing>>Static Route and click the IPv6 Static Route tab.
2. Click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile Name
Type the name of the static route profile.
Enable
Check this box to enable such profile.
Destination IP
Address
Type the IP address for such static route profile.
Prefix Length
Type the prefix length for such profile.
Nexthop
Type the nexthop address for such static route profile.
WAN/LAN Profile
Choose one of the LAN/WAN profiles of the gateway for
such static route.
Metric
Type the distance to the target (usually counted in hops).
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
4. Enter all of the settings and click Apply. The new profile will be added on the screen.
4
4
.
.
3
3
.
.
2
2
.
.
3
3
L
L
A
A
N
N
/
/
W
W
A
A
N
N
P
P
r
r
o
o
x
x
y
y
A
A
R
R
P
P
To make local device in LAN accessing into external network without passing NAT or let
the remote device access into the local device without passing NAT behind the router, please
use IP routing function to complete the work.
Usually, the local device might be assigned with a public IP address or an IP address with
the same subnet as certain WAN. When the local device tries to transmit the data packets out,
Vigor2960 Series User’s Guide
131
Vigor2960 will send it out through that certain WAN interface without passing through NAT.
Meanwhile, remote device also can access the local device directly without any difficulty.
Each item will be explained as follows:
Item Description
Add
Add a new static route setting.
Edit
Modify the selected static route setting.
To edit static route setting, simply select the one you want to
modify and click the Edit button. The edit window will
appear for you to modify the corresponding settings for the
selected rule.
Delete
Remove the selected static route setting.
To delete a static route setting, simply select the one you
want to delete and click the Delete button.
Rename
Allow to modify the selected profile name.
Refresh
Renew current web page.
Profile Number Limit
Display the total number of the profiles to be created.
Profile
Display the name of such profile
Enable
Display the status of the profile. False means disabled; True
means enabled.
WAN Profile
Display the WAN profile used for such ARP profile.
LAN Profile
Display the LAN profile used for such ARP profile.
IP
Display the IP address used by such ARP profile.
Mask
Display the mask address used by such ARP profile.
Vigor2960 Series User’s Guide
132
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
a
a
n
n
e
e
w
w
P
P
r
r
o
o
x
x
y
y
A
A
R
R
P
P
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Routing>>Static Route and click the LAN/WAN Proxy ARP tab.
2. Click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the static route profile.
Enable
Check this box to enable such profile.
WAN Profile
Choose one of the WAN/USB profiles of the gateway for
such profile.
LAN Profile
Choose one of the LAN profiles for such profile.
IP
Type an IP address for such profile.
Mask
Use the drop down menu to specify mask address.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
4. Enter all of the settings and click Apply. The new profile will be added on the screen.
Vigor2960 Series User’s Guide
133
4
4
.
.
3
3
.
.
3
3
P
P
o
o
l
l
i
i
c
c
y
y
R
R
o
o
u
u
t
t
e
e
Policy Route (also well known as PBR, policy-based routing) is a feature where you may
need to get a strategy for routing. Then packets will be directed to the specified interface if
they match one of the rules. You can setup your routing in various reasons such as load
balance, security, routing decision, and etc.
Through protocol, mode, IP address, port number and interface configuration, Policy Route
can be used to configure any routing rules to fit actual request. In general, Policy Route can
easily reach the following purposes:
Auto load balance to reduce the loading of the network traffic.
You have to manually create policy rules in order to force the traffic going to dedicate
network interface.
Strict Bind.
Through dedicated interface (WAN/LAN), the data can be sent from the source IP to
the destination IP.
Address Mapping.
Allows you specify the outgoing WAN IP address (es) for an internal private IP address
or a block of internal private IP addresses.
Other routing.
Specify routing policy to determine the direction of the data transmission.
Note: For more detailed information about using policy route, refer to Support
>>FAQ/Application Notes on www.draytek.com.
Each item will be explained as follows:
Item Description
Add
Add a new rule profile.
Edit
Modify the selected rule profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
Vigor2960 Series User’s Guide
134
rule.
Delete
Remove the selected rule profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Move Up / Move Down
Move the selected profile up or down.
Rename
Allow to modify the selected profile name.
Auto Refresh
Specify the interval of refresh time to obtain the latest status.
The information will update immediately when the Refresh
button is clicked.
Refresh
Renew current web page.
Profile
Display the name of the rule.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Priority
Display the priority of such rule.
Protocol
Display the protocol of such rule.
Time Objects
Display the name of time object.
Service Type Objects
Display the name of service type.
Source
Display the name of the source subnet/IP object/IP group.
Source Port
Display the source port range.
Destination
Display the name of the destination subnet/IP object/IP
group/DNS object.
Destination Port
Display the destination port range.
Out-going Rule
Display the route way (where the traffic forwarded) selected.
Mode
Display the route mode (NAT or Routing) used by such
policy route.
Failover to Next Rule
Display the status (enabled or disabled) of the function.
Failback (Quick
Recover)
Display the status (enabled or disabled) of the function.
Vigor2960 Series User’s Guide
135
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
a
a
n
n
e
e
w
w
p
p
o
o
l
l
i
i
c
c
y
y
r
r
u
u
l
l
e
e
1. Open Routing>>Policy Route.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the rule.
Enable
Check this box to enable such profile.
Priority
Choose the priority for such profile (top, high and normal).
Protocol
Choose a protocol (ALL, TCP, UDP, TCP/UDP and ICMP)
for such rule applied to load balance. All is the default
setting.
Time
Choose a time object to be applied by such profile.
Service Protocol
It is available when TCP/UDP is selected as protocol. Choose
a profile for such rule.
Source
Source Type - Choose the address type (Any, Subnet or
Object) for such rule.
Vigor2960 Series User’s Guide
136
Each type will bring different settings for configuration.
When Subnet is selected as Source Type
IP Address - Type an IP address here as the
source IP address for such rule.
Subnet Mask - Use the drop down list on the right
to choose a suitable mask for the source.
When Object is selected as Source Type
IP Object – Use the drop down list to choose the
source IP object(s) for such rule profile.
IP Group –Use the drop down list to choose the
source IP group(s) for such rule profile.
Destination Type - Choose the address type (Subnet or
Object) for such rule.
Each type will bring different settings for configuration.
When Subnet is selected as Destination Type
IP Address - Type an IP address here as the
destination IP address for such rule.
Subnet Mask - Use the drop down list on the right
to choose a suitable mask for the destination.
When Object is selected as Destination Type
IP Object – Use the drop down list to choose the
destination IP object(s) for such rule profile.
IP Group –Use the drop down list to choose the
destination IP group(s) for such rule profile.
DNS Object - Use the drop down list to choose
DNS object(s) for such rule profile.
When Country is selected as Destination Type
Destination
Country Object - Use the drop down list to
choose the country object(s) for such rule profile.
Route Rule
Out-going Rule - It determines the way (interface) that the
incoming traffic will be forwarded to.
Vigor2960 Series User’s Guide
137
Load Balance Pool –The incoming traffic will be forwarded
to specified WAN interface or load balance pool.
User Defined –The incoming traffic will be forwarded to the
specified WAN or LAN interface with a user defined
gateway.
VPN Trunk LB Pool –The incoming traffic will be
forwarded to specified VPN trunk profile.
PPTP – The incoming traffic will be forwarded to specified
PPTP VPN profile.
SSL VPN – The incoming traffic will be forwarded to
specified SSLVPN profile.
When Load Balance Pool is selected as Out-going Rule
Load Balance Rule - Choose one of the profiles
to be used by such rule. In which, wan1 to wan2
profiles are configured in default. In addition,
profiles configured in Routing>>Load Balance
Pool also will be displayed here.
Mode – Specify which mode (NAT or Routing)
will be used for such route rule.
Use IP Alias - Click Enable to enable such
function. Or, click Disable to disable such
function. When Enable is chosen, choose an alias
WAN IP address to replace the default WAN IP
address.
Failover to the Next Rule - When the specified
interface disconnects due to some reason, the
router can use next matched policy route rule to
perform data transmission automatically. Click
Enable to enable such function. Or, click Disable
to disable such function.
When interface down - When the specified
interface (selected by out-going rule)
disconnects, the router will use next rule
match with policy route to perform data
transmission.
When target …..- When certain IP or
domain connects successfully or fails to
connect for several seconds, Vigor router
will treat the selected interface as
disconnected and activate Failover
mechanism. For example, you might
configure settings as:
Out-going Rule : User Defined
Vigor2960 Series User’s Guide
138
Out-going interface : wan1
Failover : Enable
when target [8.8.8.8] ping [Fail] for [5]
seconds
Then, it means even if wan1 connects to
network always, once the target cannot be
detected by Vigor router for 5 seconds, Vigor
router will use next matched rule to perform
data transmission.
Failback (Quick Recover) - When the specified
interface re-connects, the traffic via other interface
will be interrupted immediately. The router will
use the specified interface for data transmission
again. Click Enable to enable such function. Or,
click Disable to disable such function.
When User Defined is selected as Out-going Rule
Outgoing Interface - Choose one of the profiles
to be used by such rule. In which, wan1 to wan2
profiles are configured in default.
Out-going (Gateway) – Type an IP address as the
gateway. Notice that LAN interface does not have
default gateway. You MUST specify a gateway if
you choose LAN as out-going interface.
Mode – Specify which mode (NAT or Routing)
will be used for such route rule.
Use IP Alias - Click Enable to enable such
function. Or, click Disable to disable such
function. When Enable is chosen, choose an alias
WAN IP address to replace the default WAN IP
address.
Failover to the Next Rule - When the specified
interface disconnects due to some reason, the
router can use next matched policy route rule to
perform data transmission automatically. Click
Enable to enable such function. Or, click Disable
to disable such function.
When interface down - When the specified
interface (selected by out-going rule)
disconnects, the router will use next rule
match with policy route to perform data
transmission.
When target …..- When certain IP or
domain connects successfully or fails to
connect for several seconds, Vigor router
will treat the selected interface as
disconnected and activate Failover
mechanism. For example, you might
configure settings as:
Out-going Rule : User Defined
Out-going interface : wan1
Vigor2960 Series User’s Guide
139
Failover : Enable
when target [8.8.8.8] ping [Fail] for [5]
seconds
Then, it means even if wan1 connects to
network always, once the target cannot be
detected by Vigor router for 5 seconds, Vigor
router will use next matched rule to perform
data transmission.
Failback (Quick Recover) - When the specified
interface re-connects, the traffic via other interface
will be interrupted immediately. The router will
use the specified interface for data transmission
again. Click Enable to enable such function. Or,
click Disable to disable such function.
When VPN Trunk LB Pool selected as Out-going Rule
Load Balance Pool – IPsec VPN trunk profile can
be selected by such policy route. You should
define the VPN trunk profile in VPN and Remote
Access >> VPN TRUNK Management >> Load
Balance Pool before
Mode – Specify which mode (NAT or Routing)
will be used for such route rule.
Failover to the Next Rule - When the specified
interface disconnects due to some reason, the
router can use next route rule to perform data
transmission automatically. Click Enable to
enable such function. Or, click Disable to disable
such function.
When interface down - When the specified
interface (selected by out-going rule)
disconnects, the router will use next rule
match with policy route to perform data
transmission.
When target …..- When certain IP or
domain connects successfully or fails to
connect for several seconds, Vigor router
will treat the selected interface as
disconnected and activate Failover
mechanism. For example, you might
configure settings as:
Out-going Rule : User Defined
Out-going interface : wan1
Failover : Enable
when target [8.8.8.8] ping [Fail] for [5]
seconds
Then, it means even if wan1 connects to
network always, once the target cannot be
detected by Vigor router for 5 seconds, Vigor
router will use next matched rule to perform
data transmission.
Vigor2960 Series User’s Guide
140
Failback (Quick Recover) - When the specified
interface re-connects, the traffic via other interface
will be interrupted immediately. The router will
use the specified interface for data transmission
again. Click Enable to enable such function. Or,
click Disable to disable such function.
When PPTP selected as Out-going Rule
PPTP Profile – VPN PPTP dial-out and VPN
PPTP dial-in profiles can be selected by such
policy route.
Mode – Specify which mode (NAT or Routing)
will be used for such route rule.
Failover to the Next Rule - When the specified
interface disconnects due to some reason, the
router can use next route rule to perform data
transmission automatically. Click Enable to
enable such function. Or, click Disable to disable
such function.
When interface down - When the specified
interface (selected by out-going rule)
disconnects, the router will use next rule
match with policy route to perform data
transmission.
When target …..- When certain IP or
domain connects successfully or fails to
connect for several seconds, Vigor router
will treat the selected interface as
disconnected and activate Failover
mechanism. For example, you might
configure settings as:
Out-going Rule : User Defined
Out-going interface : wan1
Failover : Enable
when target [8.8.8.8] ping [Fail] for [5]
seconds
Then, it means even if wan1 connects to
network always, once the target cannot be
detected by Vigor router for 5 seconds, Vigor
router will use next matched rule to perform
data transmission.
Failback (Quick Recover) - When the specified
interface re-connects, the traffic via other interface
will be interrupted immediately. The router will
use the specified interface for data transmission
again. Click Enable to enable such function. Or,
click Disable to disable such function.
When SSL VPN selected as Out-going Rule
SSL Profile – VPN SSL profiles can be selected
by such policy route.
Mode – Specify which mode (NAT or Routing)
Vigor2960 Series User’s Guide
141
will be used for such route rule.
Failover to the Next Rule - When the specified
interface disconnects due to some reason, the
router can use next route rule to perform data
transmission automatically. Click Enable to
enable such function. Or, click Disable to disable
such function.
When interface down - When the specified
interface (selected by out-going rule)
disconnects, the router will use next rule
match with policy route to perform data
transmission.
When target …..- When certain IP or
domain connects successfully or fails to
connect for several seconds, Vigor router
will treat the selected interface as
disconnected and activate Failover
mechanism. For example, you might
configure settings as:
Out-going Rule : User Defined
Out-going interface : wan1
Failover : Enable
when target [8.8.8.8] ping [Fail] for [5]
seconds
Then, it means even if wan1 connects to
network always, once the target cannot be
detected by Vigor router for 5 seconds, Vigor
router will use next matched rule to perform
data transmission.
Failback (Quick Recover) - When the specified
interface re-connects, the traffic via other interface
will be interrupted immediately. The router will
use the specified interface for data transmission
again. Click Enable to enable such function. Or,
click Disable to disable such function.
Apply
Click it to save the configuration.
Cancel
Click it to return to the factory setting.
4. Enter all of the settings and click Apply. The new rule profile will be added on the
screen.
Vigor2960 Series User’s Guide
142
E
E
x
x
a
a
m
m
p
p
l
l
e
e
1
1
:
:
H
H
o
o
w
w
t
t
o
o
S
S
e
e
t
t
u
u
p
p
A
A
d
d
d
d
r
r
e
e
s
s
s
s
M
M
a
a
p
p
p
p
i
i
n
n
g
g
b
b
y
y
U
U
s
s
i
i
n
n
g
g
P
P
o
o
l
l
i
i
c
c
y
y
R
R
o
o
u
u
t
t
e
e
Address mapping is used to map a specified private IP or a range of private IPs of NAT
subnet into a specified WAN IP (or WAN IP alias IP). Refer to the following figure.
Suppose the WAN settings for a router are configured as follows:
WAN1: 202.211.100.10, WAN1 alias: 202.211.100.11
WAN2: 203.98.200.10
Without address mapping feature, when a NAT host with an IP say "192.168.1.10" sends a
packet to the WAN side (or the Internet), the source address of the NAT host will be mapped
into either 202.211.100.10 or 203.98.200.10 (which IP or mapping is decided by the internal
load balancing algorithm).
With address mapping feature, you can manually configure any host mapping to any WAN
interface to fit the request. In the above example, you can configure NAT Host 1 to always
map to 202.211.100.10 (WAN1); Host 2 to always map to 202.211.100.11 (WAN1 alias);
Host 3 always map to 203.98.200.10 (WAN2) and Group 1 to always map to 202.211.100.10
(WAN1).
NAT Address Mapping function lets you specify the outgoing IP address(es) for one internal
IP address or a block of internal IP addresses.
We will take an example to introduce how to make use of this feature.
1. Log into the web user interface of Vigor2960.
Vigor2960 Series User’s Guide
143
2. Open WAN>>General Setup. For WAN1, choose wan1 item and click Edit. Choose
Static as the IPv4 Protocol.
3. From the following page, set main WAN IP address as 202.211.100.10.
Click Add on IP Alias to configure the other IP address which is 202.211.100.11.
4. After finished configuration for WAN1, continue to configure WAN2. At this time, the
IP switch shall be set as “203.98.200.10”.
Vigor2960 Series User’s Guide
144
5. Open Objects Setting>>Object and click Add to create a new IP object profile. Type
the required information as shown below. Click Apply to save the settings.
6. Open Routing>> Policy Route and click Add to create a new profile.
Vigor2960 Series User’s Guide
145
7. In the following page, check the box of Enable. Choose Object as the Source Type
and choose IP range object profile from the drop down list of IP Object. Click Apply to
save the settings.
And,
8. Upon completing the above configuration, you have specified the outgoing IP
address(es) for some specific computers.
Now, you bind some specific computers to some WAN IP alias for outgoing traffic.
Vigor2960 Series User’s Guide
146
E
E
x
x
a
a
m
m
p
p
l
l
e
e
2
2
:
:
H
H
o
o
w
w
t
t
o
o
S
S
e
e
t
t
u
u
p
p
L
L
o
o
a
a
d
d
B
B
a
a
l
l
a
a
n
n
c
c
e
e
b
b
y
y
U
U
s
s
i
i
n
n
g
g
P
P
o
o
l
l
i
i
c
c
y
y
R
R
o
o
u
u
t
t
e
e
The following figure shows a simple application of load balance. WAN1 and WAN2 can be
used to access into Internet. The PC in LAN1 can send the data to the remote PC through the
specified WAN1.
1. Access into web user interface of Vigor2960.
2. Open Routing>> Policy Route and click Add to create a new profile.
Vigor2960 Series User’s Guide
147
3. In the following page, type a name for such profile; check Enable; choose Subnet as
Destination Type; type 203.65.1.35 as IP address; choose Load Balance Pool as
Out-going Rule; choose WAN1 as the Load Balance Rule; click Disable for Failover
to Next Rule.
4. After finished the above settings, click Apply to save the configuration.
Now, any packets from LAN1 sent to the remote PC (IP address: 203.65.1.35) will be
forcefully to pass through WAN1.
Vigor2960 Series User’s Guide
148
E
E
x
x
a
a
m
m
p
p
l
l
e
e
3
3
:
:
H
H
o
o
w
w
t
t
o
o
C
C
u
u
s
s
t
t
o
o
m
m
i
i
z
z
e
e
a
a
S
S
e
e
c
c
u
u
r
r
e
e
R
R
o
o
u
u
t
t
e
e
b
b
e
e
t
t
w
w
e
e
e
e
n
n
H
H
e
e
a
a
d
d
q
q
u
u
a
a
r
r
t
t
e
e
r
r
a
a
n
n
d
d
B
B
r
r
a
a
n
n
c
c
h
h
b
b
y
y
U
U
s
s
i
i
n
n
g
g
P
P
o
o
l
l
i
i
c
c
y
y
R
R
o
o
u
u
t
t
e
e
A LAN to LAN VPN tunnel is built between DrayTek VPN router (e.g., Vigor2960) and the
remote router. Enterprise firewall router (in Headquarter) can control the all of the traffic
coming from the remote PC (in Branch) which wants to access into Internet.
1. Access into web user interface of Vigor2960.
2. Open Routing>> Policy Route and click Add to create a new profile.
Vigor2960 Series User’s Guide
149
3. In the following page, type a name for such profile (e.g., Secure_route); choose Subnet
as Source Type and type the source IP address with 172.16.3.25; choose User Defined
as Out-going Rule; choose lan1 as the Out-going Interface; type 192.168.1.2 as the
Out-going (Gateway); and click Disable for Failover to Next Rule.
4. After finished the above settings, click Apply to save the configuration.
Vigor2960 Series User’s Guide
150
4
4
.
.
3
3
.
.
4
4
F
F
a
a
s
s
t
t
R
R
o
o
u
u
t
t
e
e
This page allows you to configure fast paths between “2” routing subnets by using hardware
acceleration. The connection with fast route will ignore all firewall and portal examinations;
however it will have the highest priority and the best performance, instead.
Each item will be explained as follows:
Item Description
Add
Add a new route profile.
Edit
Modify the selected route profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
route profile.
Delete
Remove the selected route profile.
To delete a route profile, simply select the one you want to
delete and click the Delete button.
Move Up / Move Down
Move the selected profile up or down.
Rename
Allow to modify the selected profile name.
Reset
Reset the hit count.
Auto Refresh
Specify the interval of refresh time to obtain the latest status.
The information will update immediately when the Refresh
button is clicked.
Refresh
Renew current web page.
Profile
Display the name of the route profile.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Subnet 1/Subnet 2
Display the subnet mask defined in such profile.
Route
Display the direction of the specified 2 routes -- output
interface from Subnet 1 to Subnet 2.
Vigor2960 Series User’s Guide
151
Route
Display the direction of the specified 2 routes -- output
interface from Subnet 2 to Subnet 1.
Hit Count
Display how many connections matched this rule (enabled).
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
a
a
n
n
e
e
w
w
p
p
o
o
l
l
i
i
c
c
y
y
r
r
u
u
l
l
e
e
1. Open Routing>>Fast Route.
2. Simply click the Add button. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the route profile.
Enable
Check this box to enable such profile.
Subnet 1 / 2
Enter the IP addresses for subnet 1 and subnet 2. Use the
drop down list to specify subnet mask.
Apply
Click it to save the configuration.
Cancel
Click it to return to the factory setting.
3. Enter all of the settings and click Apply. The new rule profile will be added on the
screen.
Vigor2960 Series User’s Guide
152
4
4
.
.
3
3
.
.
5
5
D
D
e
e
f
f
a
a
u
u
l
l
t
t
R
R
o
o
u
u
t
t
e
e
This page allows you to assign a WAN profile as the default route.
Available parameters are listed as follows:
Item Description
WAN Profile
/Load Balance Pool
Name
Display the WAN profiles for user to choose as a default
route.
In which, wan1 to wan2 are factory default settings.
Auto Failover to Active
WANs
Enable – Check it to let the network connection being
established through any active WAN interface.
Disable – Check it to disable the function.
Load Balance Mode
IP Based - The same source / destination IP pair will select
the same WAN interface as policy. It is the default setting.
Session Based- All of the WAN interfaces will be used (as
out-going WAN) for passing through new sessions to get
better transmission speed. Though good speed test result for
throughput might be reached; however, some web site may
not open smoothly, especially the site need authentication,
e.g., FTP.
Exclude Service Type Object – Use the drop down
list to specify service type objects which can NOT
perform session based routing, (performing IP based
routing instead).
If you have no strong demand about speed test result, keep
default settings as IP based.
Apply
Click it to save the configuration.
Cancel
Discard current page modification.
Vigor2960 Series User’s Guide
153
4
4
.
.
3
3
.
.
6
6
R
R
I
I
P
P
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
The Routing Information Protocol (RIP) is a dynamic routing protocol used in local and
wide area networks. The routing information packet will be sent out by web server or router
periodically, and can be used to communicate with other routers. It will calculate the number
of network nodes on the route to ensure there is no obstruction on the network routine. In
addition, it will choose a correct route based on the method of Distance Vector Routing and
use the Bellman-Ford algorithm to calculate the routing table.
RIP can update the routing table automatically and find a route to send packet. See the
following figure as an example:
Suppose A supports RIP on WAN1/WAN2, B supports RIP on WAN1 and WAN2, and C
supports RIP on WAN1/WAN2.
B will tell A "if you want to send packets to C, please send it to me first", then A will create
a routing rule to forward packet that destination is C to B.
In another direction, C will do the same thing.
Vigor2960 Series User’s Guide
154
Available parameters are listed as follows:
Item Description
Enable
Check the box to enable the RIP function.
Profile
Choose the LAN/WAN profile(s).
Apply
Click it to save the settings.
Cancel
Click it to exit the dialog without saving anything.
After finished the settings, click Apply to save them.
Vigor2960 Series User’s Guide
155
4
4
.
.
3
3
.
.
7
7
O
O
S
S
P
P
F
F
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
OSPF (Open Shortest Path First) uses the algorithm of SPF (Shortest Path First) to calculate
the route metric. It is suitable for large network and complicated data exchange.
Vigor 2960
supports up to OSPF version 2(only for IPv4).
The Autonomous System (AS) used in OSPF indicates the largest entity and can be divided
into several areas. Usually, Area 0 will be used as OSPF backbone which distributing the
routing information among areas.
When you need faster convergence than distance vector, want to support much larger
networks or want to have less susceptible to bad routing information, you can enable OSPF
feature to fit your request. Note that both routers must support OSPF function at the same
time to build the OSPF connection.
Available parameters are listed as follows:
Item Description
Enable
Check the box to enable the function.
Router ID (e.g.1.2.3.4)
Specify the IP address of such Vigor router.
Such ID will help Vigor router to be identified in an
autonomous system. However, if no address is specified,
then an IP address of the active interface will be used by
system automatically.
Profile
Add- Click it to create a new profile.
Profile - Choose a LAN/WAN profile from the drop down
list to apply for such configuration.
Area – An AS will be divided into several areas. Each area
must be assigned with a dedicated number.
MD5 Auth – Enable/disable the MD5 authentication
mechanism for such profile.
Vigor2960 Series User’s Guide
156
Password – Type characters as the password for MD5
authentication.
Note: For the detailed information of OSPF application,
refer to section “3.2 How to Configure OSPF?”.
Apply
Click it to save the settings.
Cancel
Click it to discard the settings configured in this page.
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
a
a
n
n
e
e
w
w
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Routing>>OSPF Configuration.
2. Check Enable.
3. Enter the IP address as Router ID. Then, click Add.
4. Use the drop down list of LAN Profile to choose the one you need. And specify the
value of Area (either 0.0.0.0 ~ 255.255.255.255 or 0 ~ 4294967295) for that profile.
Enable/disable MD5 authentication and enter characters as the password.
5. Click Apply to save the settings.
Vigor2960 Series User’s Guide
157
4
4
.
.
3
3
.
.
8
8
B
B
G
G
P
P
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
BGP means Border Gateway Protocol. It is a standardized exterior gateway protocol which
can exchange routing and reachability information between autonomous systems (AS) on
Internet.
The protocol TCP is used by two routers supporting BGP for data transmission. They can
exchange the BGP routing information for each other. A BGP router is the “neighbor” of
other BGP routers. Define the IP address, AS number for the router is essential for TCP
connection of BGP routing information exchange.
AS, the abbreviation of Autonomous System, is a group interconnected with multiple IP
addresses. AS numbers indicate the full paths that the route information will be taken. It can
be operated by one or several ISPs and follows the routing policies made by ISP.
4
4
.
.
3
3
.
.
8
8
.
.
1
1
N
N
e
e
i
i
g
g
h
h
b
b
o
o
r
r
s
s
S
S
t
t
a
a
t
t
u
u
s
s
Such page displays current neighbors status in BGP routing environment.
Vigor2960 Series User’s Guide
158
Available parameters are listed as follows:
Item Description
Auto Refresh
Specify the interval of refresh time to obtain the latest status.
The information will update immediately when the Refresh
button is clicked.
Refresh
Renew current web page.
BGP Neighbor
Display the neighbor profile name configured successfully in
the Neighbor tab in Routing >>BGP configuration.
Neighbor IP
Display the neighbor IP address configured successfully in
the Neighbor tab in Routing >>BGP configuration.
Neighbor AS
Display the autonomous system number of the neighbor
configured successfully in the Neighbor tab in Routing
>>BGP configuration.
State
Display the status of neighbor profile. If it is established
successfully, “Established (time)” will be shown in this field.
Vigor2960 Series User’s Guide
159
4
4
.
.
3
3
.
.
8
8
.
.
2
2
B
B
G
G
P
P
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
This page is used to configure the general settings for the host which is ready for using BGP.
Available parameters are listed as follows:
Item Description
Enable
Check the box to enable BGP function.
Autonomous System
number
Type the autonomous system number for the host in BGP
application.
Router ID (e.g.1.2.3.4)
Specify the IP address of such Vigor router.
Such ID will help Vigor router to be identified in an
autonomous system. However, if no address is specified,
then an IP address of the active interface will be used by
system automatically.
Static Networks
Define the IP addresses (forming network range) which
allow to be connected by other clients through static route.
Add – Click it to add a specified IP address and subnet
mask.
Save – Click it to save the settings.
Profile Number Limit - Display the total number of the
profiles to be created.
IP – Type the IP address.
Subnet Mask – Display subnet mask for the IP address
automatically.
After finished the settings, click Apply to save the configuration.
Vigor2960 Series User’s Guide
160
4
4
.
.
3
3
.
.
8
8
.
.
3
3
N
N
e
e
i
i
g
g
h
h
b
b
o
o
r
r
This page is used to configure the IP address and AS number for the neighbor which will
exchange BGP routing information with your Vigor router.
Available parameters are listed as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
profile.
Delete
Remove the selected profile.
To delete a profile, simply select the one you want to delete
and click the Delete button.
Rename
Allow to modify the selected profile name.
Before using such function, there is one profile existed at
least.
Refresh
Renew current web page.
Profile
Display the name of the profile.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Vigor2960 Series User’s Guide
161
Neighbor IP Address
Display the IP address of the neighbor.
Autonomous System
Number
Display the autonomous system number of the neighbor in
BGP application.
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
a
a
n
n
e
e
w
w
B
B
G
G
P
P
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Routing>> BGP Configuration and click the Neighbor tab.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the profile.
Enable
Check the box to enable this profile.
Neighbor IP
Address
Type the private IP used for this profile.
Autonomous
System number
Type the autonomous system number for the neighbor in
BGP application.
Enable MD5 Auth
Click Enable to enable MD5 authentication.
Password – Type characters as the password for MD5
authentication.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
4. Enter all of the settings and click Apply.
5. A new profile has been added onto Neighbor table.
Vigor2960 Series User’s Guide
162
4
4
.
.
4
4
N
N
A
A
T
T
NAT (Network Address Translation) is a method of mapping one or more IP addresses
and/or service ports into different specified services. It allows the internal IP addresses of
many computers on a LAN to be translated to one public address to save costs and resources
of multiple public IP addresses. It also plays a security role by obscuring the true IP
addresses of important machines from potential hackers on the Internet. The Vigor 2960
Series is NAT-enabled by default and gets one globally routable IP addresses from the ISP
by Static, PPPoE, or DHCP mechanism. The Vigor2960 Series assigns private network IP
addresses according to RFC-1918 protocol and translates the private network addresses to a
globally routable IP address so that local hosts can communicate with the router and access
the Internet.
4
4
.
.
4
4
.
.
1
1
P
P
o
o
r
r
t
t
R
R
e
e
d
d
i
i
r
r
e
e
c
c
t
t
i
i
o
o
n
n
Port Redirection means port forwarding. It may be used to expose internal servers to the
public domain or open a specific port to internal hosts. Internet hosts can use the WAN IP
address to access internal network services, such as FTP, WWW and etc. The internal FTP
server is running on the local host addressed as 192.168.1.2. When other users send this type
of request to your network through the Internet, the router will direct these requests to an
appropriate host inside. A user can also translate the port to another port by configuration.
For example, port number with 1024 can be transferred into IP address of 192.168.1.100 of
LAN. The packet is forwarded to a specific local host if the port number matches that
defined in the table.
Vigor2960 Series User’s Guide
163
Each item will be explained as follows:
Item Description
Add
Add a new port redirect profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a profile, simply select the one you want to delete
and click the Delete button.
Move Up
Change the order of selected profile by moving it up.
Move Down
Change the order of selected profile by moving it down.
Rename
Allow to modify the selected profile name.
Before using such function, there is one profile existed at
least.
Refresh
Renew current web page.
Profile
Display the name of the profile.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Port Redirection Mode
Display the direction for the port to be redirected.
WAN Profile
Display the WAN interface of this profile.
Use IP Alias
Display the type (no, Single Alias, All) the IP Alias used.
Alias
Display the selected WAN IP address.
Protocol
Display the protocol used for the entry.
Source IP
Display the name of the source IP object.
Change Source IP
Display the changed source IP address.
Public Port Start
Display the starting number of the public port.
Public Port End
Display the ending number of the public port.
Private IP
Display the private IP used for this entry.
Private Port
Display the number of the private port.
Vigor2960 Series User’s Guide
164
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
a
a
n
n
e
e
w
w
P
P
o
o
r
r
t
t
R
R
e
e
d
d
i
i
r
r
e
e
c
c
t
t
i
i
o
o
n
n
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open NAT>> Port Redirection.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the profile.
Enable
Check the box to enable this profile.
Port Redirection
Mode
Specify the direction for the port to be redirected.
WAN Profile
Specify the WAN interface for such profile.
Use IP Alias
When All is selected as WAN Profile, such feature is
unavailable.
Use the drop down menu to specify which type of IP Alias
you want.
Vigor2960 Series User’s Guide
165
Single Alias – You have to type one IP address used for IP
Alias.
All – All the IP address can be treated as IP Alias.
Alias
WAN IP alias that can be selected and used for port
redirection. Before using it, please go to WAN>>General
Setup and enable the wan1 profile. Add several IP addresses
under Static mode for wan1.
Protocol
Choose the protocol used for the entry.
Source IP
Choose an IP object for port redirection.
Change Source IP
If the source IP object shall be changed due to some reason,
enter a new IP address in this field.
Public Port Start/
Public Port End
It is available when Range to One or Range to Range
(port) or Range to Range (IP) is selected as Port
Redirection Mode.
Type the starting/ending number of the public port.
For Range-to-One, set both Start and End values with the
same value.
Private IP
Specify the private IP address of the internal host providing
the service. Simply type the private IP used for this entry.
Private IP Start /
Private IP End
It is available when Range to Range (IP) is selected as Port
Redirection Mode.
Type the starting/ending IP address.
Private Port
Type a port number for such profile.
More Port
It is available when One to One is selected as Port
Redirection Mode.
Click Add to enter public port number and private port
number.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
4. Enter all of the settings and click Apply.
5. A new profile has been added onto Port Redirection table.
Vigor2960 Series User’s Guide
166
4
4
.
.
4
4
.
.
2
2
F
F
a
a
s
s
t
t
N
N
A
A
T
T
This page allows you to configure fast paths from chosen subnets to access Internet with
hardware acceleration. The network connection with fast NAT will ignore all firewall and
portal examinations; however it will have the higher priority and the better performance,
instead.
Note: Fast Route has the highest priority and the best performance, for network
connection.
Each item will be explained as follows:
Item Description
Add
(for Fast
NAT/Exceptions)
Add a new fast NAT / exceptions profile.
Edit
(for Fast
NAT/Exceptions)
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
profile.
Delete
(for Fast
NAT/Exceptions)
Remove the selected profile.
To delete a profile, simply select the one you want to delete
and click the Delete button.
Move Up / Move Down
(for Fast
NAT/Exceptions)
Change the order of selected profile by moving it up / down.
Rename
(for Fast
NAT/Exceptions)
Allow to modify the selected profile name.
Vigor2960 Series User’s Guide
167
Before using such function, there is one profile existed at
least.
Refresh
Renew current web page.
Reset
Reset the hit count.
Auto Refresh
Specify the interval of refresh time to obtain the latest status.
The information will update immediately when the Refresh
button is clicked.
Profile
Display the name of the “Fast NAT / Exceptions” profile.
Enable
Display the status of the profile.
False means disabled; True means enabled.
Source
Display the source IP address and subnet mask.
Out-going interface
Display the WAN interface for outgoing traffic.
Route
Display the direction of the specified 2 routes -- output
interface from Subnet 1 to Subnet 2.
Route
Display the direction of the specified 2 routes -- output
interface from Subnet 2 to Subnet 1.
Hit Count
Display how many connections matched this rule (enabled).
Exceptions
Destination subnets in this table do NOT perform Fast NAT.
Profile – Display the name of exception profile.
Destination – Display the IP address with subnet mask
specified in the exception profile.
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
a
a
n
n
e
e
w
w
F
F
a
a
s
s
t
t
N
N
A
A
T
T
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open NAT>> Fast NAT.
2. Simply click the Add button.
3. The following dialog will appear.
Vigor2960 Series User’s Guide
168
Available parameters are listed as follows:
Item Description
Profile
Type the name of the profile.
Enable
Check the box to enable this profile.
Source
Enter the IP address as source IP. Use the drop down list to
choose subnet mask.
Out-going interface
Specify an interface for outgoing traffic.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
4. Enter all of the settings and click Apply.
5. A new profile has been added onto Fast NAT table.
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
a
a
n
n
E
E
x
x
c
c
e
e
p
p
t
t
i
i
o
o
n
n
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open NAT>> Fast NAT.
2. Simply click the Add button below Exceptions.
3. The following dialog will appear.
Vigor2960 Series User’s Guide
169
Available parameters are listed as follows:
Item Description
Profile
Type the name of the profile.
Destination
Enter the IP address as destination IP. Use the drop down list
to choose subnet mask.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
4. Enter all of the settings and click Apply.
5. A new profile has been added onto Exceptions table.
Vigor2960 Series User’s Guide
170
4
4
.
.
4
4
.
.
3
3
S
S
e
e
r
r
v
v
e
e
r
r
L
L
o
o
a
a
d
d
B
B
a
a
l
l
a
a
n
n
c
c
e
e
When data traffic is large, Server Load Balance can distribute heavy traffic load among
different servers equally to reach load balance. Thus, each server may keep average
workload and the network will not become slowly or interrupted due to large traffic.
Each item will be explained as follows:
Item Description
Add
Add a new server load balance profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
profile.
Delete
Remove the selected profile.
Vigor2960 Series User’s Guide
171
To delete a profile, simply select the one you want to delete
and click the Delete button.
Rename
Allow to modify the selected profile name.
Before using such function, there is one profile existed at
least.
Refresh
Renew current web page.
Profile
Display the name of the profile.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Protocol
Display the protocol used for the entry.
WAN Profile
Display the WAN interface of this profile.
IP Alias
Display the selected WAN IP address.
Port
Display the port value used by WAN interface.
Scheduler
Display the algorithm (e.g., Source IP Based or Least
Connected) of schedule.
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
a
a
n
n
e
e
w
w
s
s
e
e
r
r
v
v
e
e
r
r
l
l
o
o
a
a
d
d
b
b
a
a
l
l
a
a
n
n
c
c
e
e
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open NAT>> Server Load Balance.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the profile.
Enable
Check the box to enable this profile.
Protocol
Choose the protocol (TCP or UDP) used for the entry.
Vigor2960 Series User’s Guide
172
WAN Profile
Specify the WAN interface for such profile.
Use IP Alias
Click Enable to specify IP alias for such profile.
Alias - WAN IP alias that can be selected and used for port
redirection. Before using it, please go to WAN>>General
Setup and enable the wan1 profile. Add several IP addresses
under Static mode for wan1.
Port
Type a public port number for WAN interface.
Scheduler
Any inquiry will be processed by the server according to the
algorithm selected.
Source IP Based – The inquiry will be assigned to the
corresponding server according to the source IP address of
the inquiry.
Least Connected – The inquiry will be processed by the
server with fewer sessions.
Real Server
Type the IP, port and weight values for the server(s) which is
installed behind Vigor router.
IP – Type the IP address (LAN subnet) of real server.
Port – Type a private port number for real server.
Weight – Greater value can be specified for a server with
high process capability.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
4. Enter all of the settings and click Apply.
5. A new profile has been added onto server load balance table.
Vigor2960 Series User’s Guide
173
4
4
.
.
4
4
.
.
4
4
D
D
M
M
Z
Z
H
H
o
o
s
s
t
t
In computer networks, a DMZ (De-Militarized Zone) is a computer host or small network
inserted as a neutral zone between a company’s private network and the outside public
network. It prevents outside users from getting direct access to company network. A DMZ is
an optional and more secure approach to a firewall and effectively acts as a proxy server as
well. In a typical DMZ configuration for a small company, a separate computer (or host in
network terms) receives requests from users within the private network for access to Web
sites or other companies accessible on the public network. The DMZ host then initializes
sessions for these requests on the public networks. However, the DMZ host is not able to
initiate a session back into the private network. It can only forward packets that have already
been requested. Users of the public network outside the company can access only the DMZ
host. The DMZ may typically also have the company’s Web pages so these could be
served to the outside world. If an outside user penetrated the DMZ host’s security, only the
Web pages will be corrupted but other company information would not be exposed.
Each item will be explained as follows:
Item Description
Add
Add a new DMZ host profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a profile, simply select the one you want to delete
and click the Delete button.
Rename
Allow to modify the selected profile name.
Vigor2960 Series User’s Guide
174
Before using such function, there is one profile existed at
least.
Refresh
Renew current web page.
Profile
Display the name of the profile.
Enable
Display the status of the profile. False means disabled; True
means enabled.
WAN Profile
Display the WAN profile that such DMZ host profile will be
applied to.
IP Alias
Display the selected WAN IP address if Use IP Alias is
enabled.
DMZ Host IP
Display the IP address of the DMZ host.
Allow DMZ Host to
Access Network
Display if such function is enabled or disabled.
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
a
a
n
n
e
e
w
w
D
D
M
M
Z
Z
H
H
o
o
s
s
t
t
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open NAT>> DMZ Host.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the profile.
Vigor2960 Series User’s Guide
175
Enable
Check the box to enable the DMZ Host profile.
WAN Profile
Choose a WAN profile for such entry.
Use IP Alias
Click Enable to invoke IP Alias function.
IP Alias - IP alias that can be selected and used for port
redirection. Before using it, please go to WAN>>General
Setup and enable the wan1 profile. Add several IP addresses
under Static mode for wan1.
DMZ Host IP
Type the IP address of the DMZ host.
Allow DMZ Host to
Access Network
Click Enable to make DMS host accessing network.
Allowed IP Object
This is an optional setting.
Use the drop down list to choose the IP object profile(s) to
apply to such profile.
Allowed IP Group
This is an optional setting.
Use the drop down list to choose the IP group profile(s) to
apply to such profile.
Allowed Service
Type
This is an optional setting.
Use the drop down list to choose the type(s) to apply to such
profile.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
4. Enter all of the settings and click Apply.
5. A new profile has been added onto DMZ Host table.
Vigor2960 Series User’s Guide
176
4
4
.
.
4
4
.
.
5
5
A
A
L
L
G
G
4
4
.
.
4
4
.
.
5
5
.
.
1
1
S
S
I
I
P
P
A
A
L
L
G
G
SIP ALG means Session Initiation Protocol, Application Layer Gateway. This page
allows make SIP message and RTP packets of voice being transmitting and receiving
correctly via NAT by Vigor router.
Available parameters are listed as follows:
Item Description
Enable SIP ALG
Check the box to enable the function for the switch.
Apply
Click it to save the settings.
Cancel
Click it to discard the settings configured in this page.
Vigor2960 Series User’s Guide
177
4
4
.
.
4
4
.
.
5
5
.
.
2
2
H
H
.
.
3
3
2
2
3
3
A
A
L
L
G
G
The H.323 ALG allows incoming and outgoing VoIP calls passing through NAT. If required,
check the box and click Apply to save the settings.
4
4
.
.
4
4
.
.
6
6
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
o
o
n
n
T
T
i
i
m
m
e
e
o
o
u
u
t
t
This feature is used to configure timeout setting for sessions established by TCP/UDP. When
a session is idle for a period of time, the connection will be terminated after reaching the
time limit configured in such page.
Available parameters are listed as follows:
Item Description
TCP Timeout
Set a time limit for sessions established by TCP (except Port
80 and Port 443).
UDP Timeout
Set a time limit for sessions established by UDP.
TCP WWW Timeout
Set a time limit for sessions established by TCP Port 80 and
Port 443.
TCP SYN Timeout
Set a time limit for sessions established by TCP SYN.
Vigor2960 Series User’s Guide
178
Apply
Click it to save the settings.
Cancel
Click it to discard the settings configured in this page.
4
4
.
.
5
5
F
F
i
i
r
r
e
e
w
w
a
a
l
l
l
l
The firewall controls the allowance and denial of packets through the router. The
Firewall Setup in the Vigor2960 Series mainly consists of packet filtering, Denial of
Service (DoS) and URL (Universal Resource Locator) content filtering facilities. These
firewall filters help to protect your local network against attack from outsiders. A firewall
also provides a way of restricting users on the local network from accessing inappropriate
Internet content and can filter out specific packets, which may trigger unexpected outgoing
connection such as a Trojan.
The following sections will explain how to configure the Firewall. Users can select IP Filter,
DoS Defense, MAC Block and Port Block options from Firewall menu. The DoS Defense
facility can detect and mitigate the DoS attacks.
4
4
.
.
5
5
.
.
1
1
F
F
i
i
l
l
t
t
e
e
r
r
S
S
e
e
t
t
u
u
p
p
Vigor firewall will filter the packets based on the settings, including IP Filter, Application
Filter, URL/Web Filter and QQ Filter configured under Firewall>>Filter Setup. These
filters will group certain objects (e.g., IP Object, Service Object, Keyword Object, File
Extension Object, IM Object, P2P Object, P2P Object, Protocol Object, Web Category
Object, QQ Object, QQ Group, Time Object, and etc.) and form a powerful firewall to
protect your computer.
4
4
.
.
5
5
.
.
1
1
.
.
1
1
I
I
P
P
F
F
i
i
l
l
t
t
e
e
r
r
This page allows you to create new IP filter group for your request.
Each item will be explained as follows:
Vigor2960 Series User’s Guide
179
Item Description
Add
Add a new group profile for IP filter.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
Move Up
Change the order of selected profile by moving it up.
Move Down
Change the order of selected profile by moving it down.
Profile Number Limit
Display the total number of the profiles to be created.
Group
Display the name of the IP filter group profile.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Comment
Display the description for such profile.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
I
I
P
P
F
F
i
i
l
l
t
t
e
e
r
r
g
g
r
r
o
o
u
u
p
p
To build an IP group containing IP filter rules, please follow the steps:
1. Open Firewall>>Filter Setup and click the IP Filter tab.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Group
Type the name of the IP filter group.
Enable
Check the box to enable this profile.
Comment
Give a brief description for the profile.
Apply
Click it to save and exit the dialog.
Vigor2960 Series User’s Guide
180
Cancel
Click it to exit the dialog without saving anything.
4. Enter all of the settings and click Apply.
5. A new filter group has been added.
6. You can create filter rule by clicking
on the left side of the selected IP filter group
profile. A setting page will appear for you to add new IP filter rule profile.
7. Move your mouse to click Add.
8. The following page for configuration will appear.
Vigor2960 Series User’s Guide
181
Available parameters are listed as follows:
Item Description
Profile
Type the name of the IP filter rule.
Enable
Check the box to enable this profile.
Action
The action to be taken when packets match the rule.
Block - Packets matching the rule will be dropped
immediately
Accept- Packets matching the rule will be passed
immediately.
Block If No Further Match - A packet matching the rule,
and that does not match further rules, will be dropped.
Accept If No Further Match - A packet matching the rule,
and that does not match further rules, will be passed through.
Connection Limit –Limiting the number of packets for new
connection can avoid attack driven by unknown person. For
each connection session, packets number smaller than the
Limit Packets setting can be passed immediately; however,
packets number greater that the Limit Packets setting will be
dropped. That is, packets to be passed or dropped are
determined by connection rate (new session) at that time.
Vigor2960 Series User’s Guide
182
Limit Packets
When you choose Connection Limit as Action, you have to
configure limit packets number to determine how many
packets per second will be passed through.
Limit Penalty
Enable – Click it to enable the function of limit penalty.
When the total packet number from source IP exceeds the
value defined in Limit Packets, all packets of source IP will
be blocked temporarily till the time is passed.
Block Time – Enter the values (unit is second).
Disable – In default, such function is disabled. Packets from
source IP will not be blocked.
Limit Mode
When you choose Connection Limit as Action, you have to
choose Share or Each in addition to the number of packets
limits.
Share – It means the total IP addresses in a segment will be
limited with certain packets number per second.
Each –It means each IP will be limited with certain packets
number per second.
Next Group
When you choose Block If No Further Match or Accept If
No Further Match as Action, you have to specify next IP
filter group for further matching.
Syslog
Click Enable to make the history of firewall actions
appearing on the System Maintenance >> Syslog/Mail
Alert >> Syslog File.
Input Interface
Choose one of the LAN or WAN profiles as data receiving
interface.
Output Interface
Choose one of the LAN or WAN profiles as data
transmitting interface.
Time Schedule
Time Object - Click the triangle icon
to display the
profile selection box. Choose a schedule object profile to be
applied on such rule. You can click
to create another
new time object profile.
Time Group - Click the triangle icon
to display the
profile selection box. Choose a schedule group profile to be
applied on such rule. You can click
to create another
Vigor2960 Series User’s Guide
183
new time group profile.
Advanced Setting – Check the box of Clear sessions when
schedule ON to clear the sessions when the above schedule
profiles are applied.
Service Protocol
Service Type Object –Click the triangle icon
to display
the profile selection box. Choose one or more service type
object profiles from the drop down list. The selected profile
will be treated as service type. You can click
to create
another new service type object profile.
Service Type Group –Click the triangle icon
to display
the profile selection box. Choose one or more service type
group profiles from the drop down list. The selected profile
will be treated as service type. You can click
to create
another new service type group profile.
Incoming Country
Filter
Source Country Object (At most accept 15 countries) -
Click the triangle icon
to display the profile selection
box. Choose one or more country object profiles from the
drop down list. The selected profile will be treated as an
incoming country filter. You can click
to create another
new filter profile.
Out-going Country
Filter
Destination Country Object (At most accept 15
countries) - Click the triangle icon
to display the profile
selection box. Choose one or more country object profiles
from the drop down list. The selected profile will be treated
as an outgoing country filter. You can click
to create
another new filter profile.
Source IP Source IP Object / Source IP Group / Source User Profile
/ Source User Group / Source LDAP Group / Source
Guest Group - Click the triangle icon
to display the
profile selection box. Choose one or more object profiles
from the drop down list. The selected profile will be treated
as source target. You can click
to create another new
object profile, or click the edit icon
to modify the
existed profile.
Destination IP Destination IP Object / Destination IP Group /
Destination DNS Object / Destination User Profile /
Destination User Group / Destination LDAP Group /
Destination Guest Group - Click the triangle icon
to
display the profile selection box. Choose one or more object
profiles from the drop down list. The selected profile will be
treated as destination target. You can click
to create
another new object profile, or click the edit icon
to
modify the existed profile.
Incoming MAC
Filter
Source MAC Object - Click the triangle icon
to display
the profile selection box. Choose one or more MAC object
profiles from the drop down list. The selected profile will be
treated as source target. You can click
to create another
new MAC object profile.
Vigor2960 Series User’s Guide
184
Out-going MAC
Filter
Destination MAC Object - Click the triangle icon
to
display the profile selection box. Choose one or more MAC
object profiles from the drop down list. The selected profile
will be treated as destination target. You can click
to
create another new MAC object profile.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
9. Enter all of the settings and click Apply.
10. A new IP filter rule has been added under the IP Filter Group (named IPF_Market in
this case).
Note
: You can create multiple IP filter rules under a certain IP Filter group.
Vigor2960 Series User’s Guide
185
4
4
.
.
5
5
.
.
1
1
.
.
2
2
I
I
P
P
v
v
6
6
F
F
i
i
l
l
t
t
e
e
r
r
This page allows you to create new IPv6 filter group for your request.
Each item will be explained as follows:
Item Description
Add
Add a new group profile for IPv6 filter.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
Move Up
Change the order of selected profile by moving it up.
Move Down
Change the order of selected profile by moving it down.
Profile Number Limit
Display the total number of the profiles to be created.
Group
Display the name of the IP filter group profile.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Comment
Display the description for such profile.
Vigor2960 Series User’s Guide
186
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
I
I
P
P
v
v
6
6
F
F
i
i
l
l
t
t
e
e
r
r
g
g
r
r
o
o
u
u
p
p
To build an IP group containing IP filter rules, please follow the steps:
1. Open Firewall>>Filter Setup and click the IPv6 Filter tab.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Group
Type the name of the IP filter group.
Enable
Check the box to enable this profile.
Comment
Give a brief description for the profile.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
4. Enter all of the settings and click Apply.
5. A new filter group has been added.
Vigor2960 Series User’s Guide
187
6. You can create filter rule by clicking on the left side of the selected IP filter group
profile. A setting page will appear for you to add new IP filter rule profile.
7. Move your mouse to click Add.
8. The following page for configuration will appear.
Available parameters are listed as follows:
Vigor2960 Series User’s Guide
188
Item Description
Profile
Type the name of the IP filter rule.
Enable
Check the box to enable this profile.
Action
The action to be taken when packets match the rule.
Block - Packets matching the rule will be dropped
immediately
Accept- Packets matching the rule will be passed
immediately.
Block If No Further Match - A packet matching the rule,
and that does not match further rules, will be dropped.
Accept If No Further Match - A packet matching the rule,
and that does not match further rules, will be passed through.
Next Group
When you choose Block If No Further Match or Accept If
No Further Match as Block Action, you have to specify
next IP filter group for further matching.
Syslog
Click Enable to make the history of firewall actions
appearing on the System Maintenance >> Syslog/Mail
Alert >> Syslog File.
Input Interface
Choose one of the LAN or WAN profiles as data receiving
interface.
Output Interface
Choose one of the LAN or WAN profiles as data
transmitting interface.
Time Schedule
Time Object - Click the triangle icon
to display the
profile selection box. Choose a schedule object profile to be
applied on such rule. You can click
to create another
new time object profile.
Time Group - Click the triangle icon
to display the
profile selection box. Choose a schedule group profile to be
applied on such rule. You can click
to create another
new time group profile.
Service Protocol
Service Type Object –Click the triangle icon
to display
the profile selection box. Choose one or more service type
object profiles from the drop down list. The selected profile
will be treated as service type. You can click
to create
another new service type object profile.
Vigor2960 Series User’s Guide
189
Service Type Group –Click the triangle icon to display
the profile selection box. Choose one or more service type
group profiles from the drop down list. The selected profile
will be treated as service type. You can click
to create
another new service type group profile.
Source IP
Source IPv6 Object - Click the triangle icon
to display
the profile selection box. Choose one or more IP object
profiles from the drop down list. The selected profile will be
treated as source target. You can click
to create another
new IP object profile.
Destination IP
Destination IPv6 Object- Click the triangle icon
to
display the profile selection box. Choose one or more IP
object profiles from the drop down list. The selected profile
will be treated as destination target. You can click
to
create another new IP object profile.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
9. Enter all of the settings and click Apply.
10. A new IPv6 filter rule has been added under the IPv6 Filter Group (named For_IPv6_1
in this case).
Note
: You can create multiple IPv6 filter rules under a certain IP Filter group.
Vigor2960 Series User’s Guide
190
4
4
.
.
5
5
.
.
1
1
.
.
3
3
A
A
p
p
p
p
l
l
i
i
c
c
a
a
t
t
i
i
o
o
n
n
F
F
i
i
l
l
t
t
e
e
r
r
Application Filter can integrate several application objects within one profile for restricting
the usage of application. For example, it can block people defined in IP object profile not
using IM application, not using P2P for file sharing, and not downloading files via certain
protocol.
Each item will be explained as follows:
Item Description
Add
Add a new group profile for Application filter.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Move Up
Change the order of selected profile by moving it up.
Move Down
Change the order of selected profile by moving it down.
Rename
Allow to modify the selected profile name.
Refresh
Renew current web page.
Profile
Display the name of the application filter profile.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Syslog
Display if information for application filter will be recorded
on Syslog or not (Enable/disable).
Time Schedule
If no time schedule is set, None will be shown in this field.
Firewall Target
Display the IP object profile selected for such application
profile.
Vigor2960 Series User’s Guide
191
Item Description
APP Block
Display the APP object profile selected for such application
profile.
Counter
Display the number of packets matched.
Clear Counter
Click the icon to reset the counter.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
A
A
p
p
p
p
l
l
i
i
c
c
a
a
t
t
i
i
o
o
n
n
F
F
i
i
l
l
t
t
e
e
r
r
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Firewall>>Filter Setup and click the Application Filter tab.
2. Simply click the Add button.
3. The following dialog will appear. Click the triangle icon
to display the profile
selection box (red rectangle).
Available parameters are listed as follows:
Item Description
Profile
Type the name of the application filter profile.
Enable
Check the box to enable this profile.
Syslog
Click Enable to make the history of firewall actions
appearing on the System Maintenance >> Syslog/Mail
Alert >> Syslog File.
Vigor2960 Series User’s Guide
192
Time Schedule
Time Object - Click the triangle icon
to display the
profile selection box. Choose a schedule profile to be applied
on such application filter profile. The router will perform the
filtering job based on the time object selected. You can click
to create another new time object profile, or you can
click the edit icon
to modify the existed object profile.
Time Group - Click the triangle icon
to display the
profile selection box. Choose a schedule group profile to be
applied on such rule. You can click
to create another
new time group profile, or you can click the edit icon
to modify the existed group profile.
Source IP Source IP Object / Source IP Group / Source User Profile
/ LDAP Group/ Guest Group - Click the triangle icon
to display the profile selection box. Choose one or more IP
object / IP group / user profile / user group / LDAP group /
Guest group profiles from the drop down list. The selected
object will be filtered by the router when such application
filter profile is applied. You can click
to create another
new object profile, or click the edit icon
to modify the
existed group profile.
Action Policy
APP Block - Click the triangle icon
to display the profile
selection box. Choose one or more APP object profiles from
the drop down list which will be allowed / not be allowed to
pass through the router. You can click
to create another
new APP object profile, or you can click the edit icon
to modify the existed object profile.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
4. Enter all of the settings and click Apply.
5. A new application filter profile has been added.
4
4
.
.
5
5
.
.
1
1
.
.
4
4
U
U
R
R
L
L
/
/
W
W
e
e
b
b
C
C
a
a
t
t
e
e
g
g
o
o
r
r
y
y
F
F
i
i
l
l
t
t
e
e
r
r
URL Filter can integrate URL, Keyword, File extension and WCF object profiles within one
profile for restricting certain people accessing into Internet.
Vigor2960 Series User’s Guide
193
Each item will be explained as follows:
Item Description
Add
Add a new group profile for URL filter.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Move Up
Change the order of selected profile by moving it up.
Move Down
Change the order of selected profile by moving it down.
Rename
Allow to modify the selected profile name.
Refresh
Renew current web page.
Profile Number Limit
Display the total number of the object profiles to be created.
Profile
Display the name of the application filter profile.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Filter Https
Display if the HTTPs filter is enabled or not.
Syslog
Display if information for URL/Web Category filter will be
recorded on Syslog or not (Enable/disable).
Time Schedule
If no time schedule is set, None will be shown in this field.
Firewall Target
Display the IP object profile selected for such application
profile.
Accept
Display the Keyword/File Extension object profile selected
for system to accept.
Block
Display the Keyword/File Extension object profile selected
Vigor2960 Series User’s Guide
194
Item Description
for system to block.
Web Category Block
Display the web category object profile selected for each
rule which is not allowed to pass through the router.
Counter
Display the number of packets matched.
Clear Counter
Click the icon to reset the counter.
Use Default Message
Enable – Use the default message to display on the page that
the user tries to access into the blocked web page.
Disable – Type the message manually to display on the page
that the user tries to access into the blocked web page.
Default Web Category
Administration Message
Such field is available when you disable the function of Use
Default Message.
The message will display on the user's browser when he/she
tries to access the blocked web page.
Use HTTPs Filter
Default Message
Enable – Use the default message to display on the page that
the user tries to access into the blocked web page through
HTTPs.
Disable – Type the message manually to display on the page
that the user tries to access into the blocked web page
through HTTPs.
Default HTTPS WebSite
Filter Message
The message will display on the user's browser when he/she
tries to access the blocked web page through HTTPs.
Apply
Click it to save and exit the dialog.
Cancel
Click it to discard the settings configured in this page.
After finished the above settings, click Apply to save the configuration.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
U
U
R
R
L
L
F
F
i
i
l
l
t
t
e
e
r
r
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Firewall>>Filter Setup and click the URL/Web Category Filter tab.
2. Simply click the Add button.
Vigor2960 Series User’s Guide
195
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the URL filter profile.
Enable
Check the box to enable this profile.
Filter https
Enable – Click it to enable the HTTPS filtering job.
Disable – When only keyword and web category are
selected for such rule, choose Disable.
Syslog
Click Enable to make the history of firewall actions
appearing on the System Maintenance >> Syslog/Mail
Alert >> Syslog File.
Morelog
Except the items displayed on Syslog, more items of log will
be shown if it is enabled.
Time Schedule
Time Object - Click the triangle icon
to display the
profile selection box. Choose a schedule profile to be applied
on such application filter profile. The router will perform the
filtering job based on the time object selected. You can click
to create another new time object profile, or you can
Vigor2960 Series User’s Guide
196
Item Description
click the edit icon to modify the existed object profile.
Time Group - Click the triangle icon
to display the
profile selection box. Choose a schedule group profile to be
applied on such rule. You can click
to create another
new time group profile, or you can click the edit icon
to modify the existed group profile.
Source IP Source IP Object / Source IP Group / Source User Profile
/ Source User Group / Source LDAP Group / Source
Guest Group - Click the triangle icon
to display the
profile selection box. Choose one or more object profiles
from the drop down list. The selected profile will be treated
as source target. You can click
to create another new
object profile, or click the edit icon
to modify the
existed profile.
Action Policy
File Extension Accept / File Extension Block - Click the
triangle icon
to display the profile selection box. Choose
one or more File Extension object profiles from the drop
down list which will be allowed / not be allowed to pass
through the router. You can click
to create another new
File Extension object profile, or you can click the edit icon
to modify the existed object profile.
Keyword Accept / Keyword Block - Click the triangle icon
to display the profile selection box. Choose e one or more
keyword object profiles from the drop down list which will
be allowed / not be allowed to pass through the router. You
can click
to create another new keyword object profile,
or you can click the edit icon
to modify the existed
object profile.
Web Category Policy - Click the triangle icon
to display
the profile selection box. Choose one or more web category
object profiles from the drop down list which will not be
allowed to pass through the router. You can click
to
create another new web category object profile, or you can
click the edit icon
to modify the existed object profile.
China Web Category Block - Click the triangle icon
to
display the profile selection box. Choose one or more web
category object profiles from the drop down list which will
not be allowed to pass through the router. You can click
to create another new web category object profile, or you can
click the edit icon
to modify the existed object profile.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
4. Enter all of the settings and click Apply.
5. A new URL filter profile has been added.
Vigor2960 Series User’s Guide
197
4
4
.
.
5
5
.
.
1
1
.
.
5
5
Q
Q
Q
Q
F
F
i
i
l
l
t
t
e
e
r
r
This page is designed for the user in China only. For people outside China, skip this
section.
Each item will be explained as follows:
Item Description
Add
Add a new group profile for QQ filter.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Move Up
Change the order of selected profile by moving it up.
Move Down
Change the order of selected profile by moving it down.
Rename
Allow to modify the selected profile name.
Refresh
Renew current web page.
Profile Number Limit
Display the total number of the object profiles to be created.
Profile
Display the name of the application filter profile.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Time Profile
If no time schedule is set, None will be shown in this field.
Source IP
Display the IP object profile selected for each rule.
QQ Account Pass
Display the account name which is allowed to pass if the
selected QQ profile is enabled.
QQ Account Block
Display the account name which will be blocked if the
Vigor2960 Series User’s Guide
198
Item Description
selected QQ profile is enabled.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
Q
Q
Q
Q
F
F
i
i
l
l
t
t
e
e
r
r
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Firewall>>Filter Setup and click the QQ Filter tab.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the QQ filter profile.
Enable
Check the box to enable this profile.
Time Profile
Use the drop down list to specify a time profile for such
profile.
You can click
to create another new time object profile.
Source IP
Specify user profiles for such profile. Users within the
source IP will be filtered by Vigor router when such profile
is applied.
QQ Account Pass
Use the drop down list to specify a QQ account profile for
such profile. The select account will not be blocked by Vigor
router.
You can click
to create another new QQ account.
QQ Account Block
Use the drop down list to specify a QQ account profile for
such profile. The select account will be blocked by Vigor
router.
Vigor2960 Series User’s Guide
199
Item Description
You can click to create another new QQ account.
Apply
Click it to save and exit the dialog.
Cancel
Click it to discard the settings configured in this page.
4. Enter all of the settings and click Apply.
5. A new QQ filter profile has been added.
4
4
.
.
5
5
.
.
1
1
.
.
6
6
D
D
e
e
f
f
a
a
u
u
l
l
t
t
P
P
o
o
l
l
i
i
c
c
y
y
Default policy will be applied to all of the incoming packets, if IP Filter, Application Filter,
URL/Web Category Filter and QQ Filter are not suitable for the incoming packets.
Available parameters are listed as follows:
Item Description
Default Policy
Pass – All of the incoming packets can pass through Vigor
router without any filtering.
Block – All of the incoming packets will be blocked except
the following rules.
Pass DNS Query – Check the box to make the DNS
query passing through Vigor router’s firewall.
Pass Reply of Port Redirection /DMZ – Check the
box to make the outgoing packets processed by Port
Redirection/DMZ passing through Vigor router’s
firewall.
Block All Incoming Traffic – Check the box to block
all of the incoming packets.
Enable Syslog – Check the box to make related
information for the blocked packets being recorded in
Syslog.
The above three policies also can be configured in
Firewall>>Filter Setup>>IP Filter/Application Filter.
Vigor2960 Series User’s Guide
200
Item Description
Packet Inspection
Disable – No inspection will be performed.
Enable – Packet inspection will be performed.
Packets Number
If Packet Inspection is enabled, choose a packet number for
filtering. Available settings are from 4 to 32. For example,
“8” is selected as packet number setting. It means only the
former 8 packets will be filtered and inspected by Firewall
rule. Others are allowed to pass through without any
inspection.
Apply
Click it to save the configuration.
Cancel
Click it to discard the settings configured in this page.
After finished the above settings, click Apply to save the configuration.
Vigor2960 Series User’s Guide
201
4
4
.
.
5
5
.
.
2
2
D
D
o
o
S
S
D
D
e
e
f
f
e
e
n
n
s
s
e
e
The DoS function helps to detect and mitigates DoS attacks. These include flooding-type
attacks and vulnerability attacks. Flooding-type attacks attempt to use up all your system's
resources while vulnerability attacks try to paralyze the system by offending the
vulnerabilities of the protocol or operation system.
4
4
.
.
5
5
.
.
2
2
.
.
1
1
S
S
w
w
i
i
t
t
c
c
h
h
R
R
a
a
t
t
e
e
L
L
i
i
m
m
i
i
t
t
Default interface profiles will be shown on the page.
Choose one of the profiles and click Edit. You can modify the rate limit manually for each
interface profile.
Available parameters are listed as follows:
Item Description
Vigor2960 Series User’s Guide
202
Interface
Display the interface selected.
Port Rate Limit
Enable Ingress Rate Limit (All Packets) – Check the box
to make all packets will be limited by the rate limit.
Rate Limit – The default setting is “-1”. It means no limit.
Storm Filter
Broadcast - Click Enable to block the packets attacks
coming from broadcast storm.
Multicast - Click Enable to block the packets attacks
coming from multicast storm.
Unicast - Click Enable to block the packets attacks coming
from unicast storm.
Unknown Unicast –Click Enable to block the packets
attacks coming from unknown unicast storm.
Unknown Multicast - Click Enable to block the packets
attacks coming from unknown multicast storm.
Filtering Rate – Type a number (1~4096, unit is 64Kpbs)
required for filtering.
Apply
Click it to save the configuration.
After finished the above settings, click Apply to save the configuration.
4
4
.
.
5
5
.
.
2
2
.
.
2
2
S
S
y
y
s
s
t
t
e
e
m
m
In the Firewall group, click the DOS Defense and click the tab of System. You will see the
following page. The DoS Defense Engine inspects each incoming packet against the attack
signature database. Any packet that may paralyze the host in the security zone is blocked.
The DoS Defense Engine also monitors traffic behavior. Any anomalous situation violating
the DoS configuration is reported and the attack is mitigated.
Available parameters are listed as follows:
Item Description
Enable
Check the box to enable this profile.
Exclude LAN-to-WAN
traffic from DoS
Defense
Check it to exclude traffic from LAN to WAN for DoS
Defense.
Vigor2960 Series User’s Guide
203
Item Description
Block SYN Flood
Click Enable to activate the SYN flood defense function.
If the amount of TCP SYN packets from the Internet exceeds
the user-defined threshold value, the router will be forced to
randomly discard the subsequent TCP SYN packets within
the user-defined timeout period.
SYN Flood Threshold
The default setting for threshold is 2000 packets per second.
SYN Flood Timeout
The default setting for timeout is 10 seconds.
Block ICMP Flood
Click Enable to activate the ICMP flood defense function.
If the amount of ICMP echo requests from the Internet
exceeds the user-defined threshold value, the router will
discard the subsequent echo requests within the user-defined
timeout period.
ICMP Flood Threshold
The default setting for threshold is 250 packets per second.
ICMP Flood Timeout
The default setting for timeout is 10 seconds.
Block UDP Flood
Click Enable to activate the UDP flood defense function.
If the amount of UDP packets from the Internet exceeds the
user-defined threshold value, the router will be forced to
randomly discard the subsequent UDP packets within the
user-defined timeout period.
UDP Flood Threshold
The default setting for threshold is 2000 packets per second.
UDP Flood Timeout
The default setting for timeout is 10 seconds.
Block Port Scan
Click Enable to activate the Port Scan detection function.
Port scan sends packets with different port numbers to find
available services, which respond. The router will identify it
and report a warning message if the port scanning rate in
packets per second exceeds the user-defined threshold value.
Port Scan Threshold
The default threshold is 2000 packets per second.
Block IP Options
Click Enable to activate the Block IP options function. The
router will ignore any IP packets with IP option field
appearing in the datagram header.
Block Land
Click Enable to activate the Block Land function. A Land
attack occurs when an attacker sends spoofed SYN packets
with identical source address, destination addresses and port
number as those of the victim.
Block SMURF
Click Enable to activate the Block Smurf function. The
router will reject any ICMP echo request destined for the
broadcast address.
Block Trace Route
Click Enable to activate the Block Trace Route function.
Block SYN Fragment
Click Enable to activate the Block SYN fragment function.
Any packets having the SYN flag and fragmented bit sets
will be dropped.
Block Fraggle
Click Enable to activate the Block fraggle Attack function.
Any broadcast UDP packets received from the Internet are
Vigor2960 Series User’s Guide
204
Item Description
blocked.
Block Tear Drop
Click Enable to activate the Block Tear Drop function. This
attack involves the perpetrator sending overlapping packets
to the target hosts so that target host will hang once they
re-construct the packets. The routers will block any packets
resembling this attacking activity.
Block Ping of Death
Click Enable to activate the Block Ping of Death function.
Many machines may crash when receiving an ICMP
datagram that exceeds the maximum length. The router will
block any fragmented ICMP packets with a length greater
than 1024 octets.
Block ICMP Fragment
Click Enable to activate the Block ICMP fragment function.
Any ICMP packets with fragmented bit sets are dropped.
Block Unknown
Protocol
Click Enable to activate the Block Unknown Protocol
function. The router will block any packets with unknown
protocol types.
Apply
Click it to save the configuration.
Cancel
Click it to discard the settings configured in this page.
After finished the above settings, click Apply to save the configuration.
Vigor2960 Series User’s Guide
205
4
4
.
.
5
5
.
.
3
3
M
M
A
A
C
C
B
B
l
l
o
o
c
c
k
k
MAC Block allows you to set lots of proprietary MAC Address. Packets will be dropped if
the source or destination MAC Address of packets is matched with these assigned MAC
Addresses. The advantage of MAC Block is that it can filter some unnecessary packets or
attacking packets on LAN network.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Rename
Allow to modify the selected profile name.
Refresh
Renew current web page.
Profile Number Limit
Display the total number of the object profiles to be created.
Profile
Display the name of the profile.
Enable
Display the status of the profile. False means disabled; True
means enabled.
MAC Address
Display the MAC address for such profile.
Vigor2960 Series User’s Guide
206
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
M
M
A
A
C
C
B
B
l
l
o
o
c
c
k
k
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Firewall>>MAC Block.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type the name which can briefly describe the reason of the
MAC block of such profile.
Enable
Check the box to enable this profile.
MAC Address
Type the MAC address which will be blocked by the system
for such profile.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
4. Enter all of the settings and click Apply.
5. A new MAC Block profile has been created.
Vigor2960 Series User’s Guide
207
4
4
.
.
5
5
.
.
4
4
F
F
i
i
l
l
t
t
e
e
r
r
C
C
o
o
u
u
n
n
t
t
e
e
r
r
Such page will display log or status for firewall group, rule information for IP Filter, IPv6
Filter, Application Filter and URL/Web Category Filter.
Simply click the tab of IP Filter, IPv6 Filter, Application Filter or URL/Web Category Filter
to get the status for each filter.
If there is no data (counter number is “0”) for certain rule displayed on such page, that means
such rule might be configured wrong or blocked by other rules. Then the administrator or the
user can adjust the filter to meet his request.
Vigor2960 Series User’s Guide
208
4
4
.
.
6
6
O
O
b
b
j
j
e
e
c
c
t
t
s
s
S
S
e
e
t
t
t
t
i
i
n
n
g
g
Vigor2960 allows users to set different filter profiles based on IP, MAC/Vendor, Country,
service type, keyword, file extension, instant message application, P2P application, protocol
application, web category, QQ application, time setting, SMS service, mail service,
notification and so on. These objects setting profiles can be applied in Firewall.
Vigor2960 Series User’s Guide
209
4
4
.
.
6
6
.
.
1
1
I
I
P
P
O
O
b
b
j
j
e
e
c
c
t
t
For IPs in a limited range usually will be applied in configuring router’s settings, we can
define them with objects and bind them with groups for using conveniently. Later, we can
select that object/group that can apply it. For example, all the IPs in the same department can
be defined with an IP object (a range of IP address).
This page allows you to specify certain IP address, range of IP addresses or subnet mask as
an object which will be applied in Firewall.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (256) of the object profiles to be
created.
Profile
Display the name of the profile.
Interface
Display the interface of the IP Object.
Address Type
Display the address type (single, range or subnet) for such
profile.
Start IP Address
Display the IP address of the starting point for such profile.
End IP Address
Display the IP address of the ending point for such profile.
It will be joint with Start IP Address only when you choose
Vigor2960 Series User’s Guide
210
Item Description
Range as the Address Type.
Subnet Mask
Display the subnet mask for such profile.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
I
I
P
P
O
O
b
b
j
j
e
e
c
c
t
t
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Objects Setting>>IP Object.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type the name of such profile.
Address Type
Choose the address type (Single / Range /Subnet) for such
profile.
Start IP Address
Type the IP address of the starting point for such profile.
End IP Address
Type the IP address of the ending point for such profile if
you choose Range as Address Type.
Subnet Mask
Use the drop down list to choose the subnet mask for such
profile if you choose Subnet as Address Type.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
4. Enter all of the settings and click Apply.
5. A new IP object profile has been created.
Vigor2960 Series User’s Guide
211
4
4
.
.
6
6
.
.
2
2
I
I
P
P
G
G
r
r
o
o
u
u
p
p
To manage conveniently, several IP object profiles can be grouped under a group. Different
IP group can contain different IP object profiles.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (32) of the object profiles to be
created.
Group Name
Display the name of the object group.
Description
Display the description for such profile.
Objects
Display the object profiles grouped under such group.
Vigor2960 Series User’s Guide
212
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
I
I
P
P
G
G
r
r
o
o
u
u
p
p
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Objects Setting>>IP Group.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Group Name
Type the name of the object group. The number of the
characters allowed to be typed here is 20.
Description
Make a brief explanation for such profile if the group name
is set not clearly.
Objects
Use the drop down list to check the IP object profiles under
such group.
All the available IP objects that you have added on Objects
Setting>>IP Object will be seen here.
To clear the selected one, click
to remove current object
selections.
Apply
Click it to save the configuration.
Cancel
Click it to exit the dialog without saving anything.
4. Enter all of the settings and click Apply.
5. A new IP Group profile has been created.
Vigor2960 Series User’s Guide
213
4
4
.
.
6
6
.
.
3
3
I
I
P
P
v
v
6
6
O
O
b
b
j
j
e
e
c
c
t
t
You can set up to 200 sets of IPv6 Objects with different conditions.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (200) of the object profiles to be
created.
Profile
Display the name of the object.
Address Type
Display the address type of the object.
Address Pool
Display the IP address/ IP range /subnet of the object.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
I
I
P
P
v
v
6
6
O
O
b
b
j
j
e
e
c
c
t
t
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Objects Setting>>IPv6 Object.
2. Simply click the Add button.
3. The following dialog will appear.
Vigor2960 Series User’s Guide
214
Available parameters are listed as follows:
Item Description
Profile
Type the name of the object.
Address Type
There are three types:
List – Allow to specify IP address.
Range – Allow to specify a range of IP addresses.
Prefix – Allow to specify prefix for IPv6 IP address.
Suffix – Allow to specify suffix for IPv6 IP address.
Address Pool
This field allows you to type IP address, specify Tag number
and type subnet mask based on IPv6 protocol.
Tag is an optional field only used for user to distinguish the
name/usage of the defined address.
Apply
Click it to save the configuration.
Cancel
Click it to exit the dialog without saving anything.
4. Enter all of the settings and click Apply.
5. A new IPv6 Object profile has been created.
Vigor2960 Series User’s Guide
215
4
4
.
.
6
6
.
.
4
4
M
M
A
A
C
C
/
/
V
V
e
e
n
n
d
d
o
o
r
r
O
O
b
b
j
j
e
e
c
c
t
t
MAC / Vendor object profile can determine which MAC address of vendor shall be blocked
by the Vigor router’s Firewall.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
M
M
A
A
C
C
/
/
V
V
e
e
n
n
d
d
o
o
r
r
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Objects Setting>> MAC / Vendor Object.
2. Simply click the Add button.
3. The following dialog will appear.
Vigor2960 Series User’s Guide
216
Available parameters are listed as follows:
Item Description
Profile
Type a name for such profile.
MAC Address
Click Add to have the fields of MAC Address and Mask.
Type the address with the correct format (will be shown
automatically when the mouse cursor is on it). Choose a
suitable mask selection.
Apply
Click it to save the configuration.
Vendor
Edit – Click it to open a table of vendor list. Check the
one(s) you want. The names for selected vendors will be
shown later.
Cancel
Click it to exit the dialog without saving anything.
4. Enter all of the settings and click Apply.
5. A new MAC/Vendor Object profile has been created.
Vigor2960 Series User’s Guide
217
4
4
.
.
6
6
.
.
5
5
C
C
o
o
u
u
n
n
t
t
r
r
y
y
O
O
b
b
j
j
e
e
c
c
t
t
The country object profile can determine which country/countries shall be blocked by the
Vigor router’s Firewall.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
C
C
o
o
u
u
n
n
t
t
r
r
y
y
O
O
b
b
j
j
e
e
c
c
t
t
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Objects Setting>>Country Object.
2. Simply click the Add button.
3. The following dialog will appear.
Vigor2960 Series User’s Guide
218
Available parameters are listed as follows:
Item Description
Profile
Type a name for such profile.
Countries
Check the box(es) for the country/countries to be blocked by
Firewall.
Apply
Click it to save the configuration.
Cancel
Click it to exit the dialog without saving anything.
4. Enter all of the settings and click Apply.
5. A new Country Object profile has been created.
Vigor2960 Series User’s Guide
219
4
4
.
.
6
6
.
.
6
6
S
S
e
e
r
r
v
v
i
i
c
c
e
e
T
T
y
y
p
p
e
e
O
O
b
b
j
j
e
e
c
c
t
t
TCP and UDP service with specified port range can be saved with different service type
object profiles. Later, it can be applied to Firewall as a filter rule.
In default, common used service type object profiles have been created in this page.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (96) of the object profiles to be
created.
Profile
Display the name of the service type object profile.
Protocol
Display the protocol selected for such profile.
Source Port Start
Display the starting source port for such profile.
Source Port End
Display the ending source port for such profile.
Destination Port Start
Display the starting destination port for such profile.
Destination Port End
Display the ending destination port for such profile.
Vigor2960 Series User’s Guide
220
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
S
S
e
e
r
r
v
v
i
i
c
c
e
e
T
T
y
y
p
p
e
e
O
O
b
b
j
j
e
e
c
c
t
t
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Objects Setting>> Service Type Object.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type a name for such profile. The number of the characters
allowed to be typed here is 10.
Protocol
Specify one of the protocols for such profile.
Source Port Start
It is available for TCP/UDP protocol. It can be ignored for
ICMP.
Type a port number (0 – 65535) as the starting source port.
Source Port End
It is available for TCP/UDP protocol. It can be ignored for
ICMP. Type a port number (0 – 65535) as the ending source
port.
Destination Port
Start
It is available for TCP/UDP protocol. It can be ignored for
ICMP.
Type a port number (0 – 65535) as the starting destination
port.
Destination Port
End
It is available for TCP/UDP protocol. It can be ignored for
ICMP. Type a port number (0 – 65535) as the ending
destination port.
Apply
Click it to save the configuration.
Cancel
Click it to exit the dialog without saving anything.
4. Enter all of the settings and click Apply.
5. A new Service Type Object profile has been created.
Vigor2960 Series User’s Guide
221
4
4
.
.
6
6
.
.
7
7
S
S
e
e
r
r
v
v
i
i
c
c
e
e
T
T
y
y
p
p
e
e
G
G
r
r
o
o
u
u
p
p
This page allows you to bind several service types into one group.
To manage conveniently, several service type profiles can be grouped under a service type
group. Different service type group can contain different service type profiles.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (32) of the object profiles to be
created.
Group Name
Display the name of the service type group.
Description
Display the description for such profile.
Objects
Display the service type object profiles grouped under such
group.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
S
S
e
e
r
r
v
v
i
i
c
c
e
e
T
T
y
y
p
p
e
e
G
G
r
r
o
o
u
u
p
p
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Objects Setting>> Service Type Group.
2. Simply click the Add button.
3. The following dialog will appear.
Vigor2960 Series User’s Guide
222
Available parameters are listed as follows:
Item Description
Group Name
Type the name of the service type object group. The number
of the characters allowed to be typed here is 20.
Group Name
Type the name of the service type object group. The number
of the characters allowed to be typed here is 20.
Objects
Use the drop down list to check the service type object
profiles under such group.
All the available service type objects that you have added on
Objects Setting>>Service Type Object will be seen here.
To clear the selected one, click
to remove current object
selections.
Apply
Click it to save the configuration.
Cancel
Click it to exit the dialog without saving the configuration.
4. Enter all of the settings and click Apply.
5. A new Service Type Group profile has been created.
Vigor2960 Series User’s Guide
223
4
4
.
.
6
6
.
.
8
8
K
K
e
e
y
y
w
w
o
o
r
r
d
d
/
/
D
D
N
N
S
S
O
O
b
b
j
j
e
e
c
c
t
t
4
4
.
.
6
6
.
.
8
8
.
.
1
1
K
K
e
e
y
y
w
w
o
o
r
r
d
d
O
O
b
b
j
j
e
e
c
c
t
t
Keyword can be set as a filter rule to be applied in Firewall. Vigor2960 allows users to set
keyword profile with several keywords. Even, it allows users to group several keyword
profiles within a keyword group.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (100) of the object profiles to be
created.
Profile
Display the name of the keyword object profile.
Member
Display the words specified in such profile.
Vigor2960 Series User’s Guide
224
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
K
K
e
e
y
y
w
w
o
o
r
r
d
d
O
O
b
b
j
j
e
e
c
c
t
t
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Objects Setting>> Keyword Object.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the Keyword Object. The number of the
characters allowed to be typed here is 10.
Member
Type the content for such profile. For example, type
gambling as Contents. When you browse the webpage, the
page with gambling information will be watched out and be
passed/blocked based on the configuration on Firewall
settings.
Add – Type the word in the box of Member and click this
button to add the new word as keyword object.
Save – Click it to save the setting.
Apply
Click it to save the configuration.
Cancel
Click it to exit the dialog without saving the configuration.
4. Enter all of the settings and click Apply.
5. A new Keyword Object profile has been created.
Vigor2960 Series User’s Guide
225
4
4
.
.
6
6
.
.
8
8
.
.
2
2
D
D
N
N
S
S
O
O
b
b
j
j
e
e
c
c
t
t
DNS can be set as a filter rule to be applied in Firewall.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (100) of the object profiles to be
created.
Profile
Display the name of the DNS object profile.
Member Table
Display the words specified in such profile.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
D
D
N
N
S
S
O
O
b
b
j
j
e
e
c
c
t
t
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Objects Setting>> DNS Object.
2. Simply click the Add button.
3. The following dialog will appear.
Vigor2960 Series User’s Guide
226
Available parameters are listed as follows:
Item Description
Profile
Type the name of the DNS object group.
Member Table
Type the domain name of the DNS that you want to filter.
Add – Type the word in the box of Member and click this
button to add the new word as DNS object.
Save – Click it to save the setting.
Apply
Click it to save the configuration.
Cancel
Click it to exit the dialog without saving the configuration.
4. Enter all of the settings and click Apply.
5. A new DNS Object profile has been created.
4
4
.
.
6
6
.
.
9
9
F
F
i
i
l
l
e
e
E
E
x
x
t
t
e
e
n
n
s
s
i
i
o
o
n
n
O
O
b
b
j
j
e
e
c
c
t
t
This page allows you to set file extension profiles which will be applied in Firewall. All the
files with the extension names specified in these profiles will be processed according to the
chosen action.
Each item will be explained as follows:
Vigor2960 Series User’s Guide
227
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (8) of the object profiles to be
created.
Profile
Display the name of the profile.
Image
Display the selected file extension of image.
Video
Display the selected file extension of video.
Audio
Display the selected file extension of audio.
Java
Display the selected file extension of java.
ActiveX
Display the selected file extension of activeX.
Compression
Display the selected file extension of compression.
Execution
Display the selected file extension of execution.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
F
F
i
i
l
l
e
e
E
E
x
x
t
t
e
e
n
n
s
s
i
i
o
o
n
n
O
O
b
b
j
j
e
e
c
c
t
t
P
P
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Objects Setting>>File Extension Object.
2. Simply click the Add button.
3. The following dialog will appear.
Vigor2960 Series User’s Guide
228
Available parameters are listed as follows:
Item Description
Profile
Type the name of the File Extension Object group. The
number of the characters allowed to be typed here is 10.
Image
Several file extensions for Image offered for you to choose.
Use the drop down list to check the box (es) to select the file
extension you need.
Video
Several file extensions for Video offered for you to choose.
Use the drop down list to check the box (es) to select the file
extension you need.
Audio
Several file extensions for Audio offered for you to choose.
Use the drop down list to check the box (es) to select the file
extension you need.
Java
Several file extensions for Java offered for you to choose.
Use the drop down list to check the box (es) to select the file
extension you need.
ActiveX
Several file extensions for ActiveX offered for you to
choose. Use the drop down list to check the box (es) to select
the file extension you need.
Compression
Several file extensions for compression offered for you to
choose. Use the drop down list to check the box (es) to select
the file extension you need.
Execution
Several file extensions for execution offered for you to
choose. Use the drop down list to check the box (es) to select
the file extension you need.
Apply
Click it to save the configuration.
Cancel
Click it to exit the dialog without saving the configuration.
4. Enter all of the settings and click Apply.
5. A new File Extension Object profile has been created.
Vigor2960 Series User’s Guide
229
4
4
.
.
6
6
.
.
1
1
0
0
A
A
P
P
P
P
O
O
b
b
j
j
e
e
c
c
t
t
The IM, P2P, Protocol and Others types can be integrated as an APP object which can be
used in Firewall to block certain applications.
Each item will be explained as follows:
Item Description
APP Signature Upgrade
Click it to open System Maintenance>>APP Signature
Upgrade configuration page.
APP Support List
APP Support List will display all of the applications with
versions supported by Vigor router. They are separated with
types of IM, P2P, Protocol and Others. Each tab will bring
out different items with supported versions.
Below shows the items with versions which are categorized
under IM.
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (32) of the object profiles to be
created.
Profile
Display the name of the IM object profile.
IM
Display the IM application specified in such profile.
Vigor2960 Series User’s Guide
230
P2P
Display the P2P specified in such profile.
Protocol
Display the protocol specified in such profile.
Others
Display other types specified in such profile.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
A
A
P
P
P
P
O
O
b
b
j
j
e
e
c
c
t
t
P
P
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Objects Setting>>APP Object.
2. Simply click the Add button.
3. The following dialog will appear. Click IM to get the following page. People like to
use Instant Message to communication with friends on line just for fun or just because
it is easy and convenient. However, it might reduce the productivity of employees to a
company. Therefore, a tool to block or limit the usage of IM application is important to
a company. IM object setting lists all of the popular instant message application for you
to choose to block. Choose the one(s) you want to block and save as an IM Object
profile. Later, it can be applied to Firewall as a filter rule and reach the purpose of
block.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the IM object group. The number of the
characters allowed to be typed here is 10.
IM Application
Several IM applications offered for you to choose. Check the
one(s) you want to add for such profile.
WebIM
It lists a package of IM application based on web page. You
may check the box to include all of them.
Apply
Click it to save the configuration.
Vigor2960 Series User’s Guide
231
Item Description
Cancel
Click it to exit the dialog without saving the configuration.
Click P2P to get the following page. Vigor2960 can block P2P application for users,
especially for the ones who always upload or download improper files to Internet.
P2P object setting lists all of the point to point application for you to choose to block.
Choose the one(s) you want to block and save as a P2P Object profile. Later, it can be
applied to Firewall as a filter rule and reach the purpose of block.
Item Description
Other P2P
Applications
Several P2P applications offered for you to choose. Check
the one(s) you want to add for such profile.
Click Protocol to get the following page. Network services, e.g., DNS, FTP, HTTP,
POP3, for LAN users can be blocked by Vigor2960. Common services will be listed in
this function and can be selected to be blocked by the router.
Item Description
Protocol
Several protocols offered for you to choose. Check the one
(s) you want to add for such profile.
Vigor2960 Series User’s Guide
232
Click Others to get the following page.
Item Description
Tunneling/Streamin
g/Remote
Control/Web HD
Several protocols offered for you to choose. Check the one
(s) you want to add for such profile.
4. Enter all of the settings and click Apply.
5. A new APP Object profile has been created.
Vigor2960 Series User’s Guide
233
4
4
.
.
6
6
.
.
1
1
1
1
W
W
e
e
b
b
C
C
a
a
t
t
e
e
g
g
o
o
r
r
y
y
O
O
b
b
j
j
e
e
c
c
t
t
We all know that the content on the Internet just like other types of media may be
inappropriate sometimes. As a responsible parent or employer, you should protect those in
your trust against the hazards. With web category filtering service of the Vigor router, you
can protect your business from common primary threats, such as productivity, legal liability,
network and security threats. For parents, you can protect your children from viewing adult
websites or chat rooms.
WCF adopts the mechanism developed and offered by certain service provider. No matter
activating WCF feature or getting a new license for web content filter, you have to click
Activate URL to satisfy your request. Note that service provider matching with Vigor router
currently offers a period of time for trial version for users to experiment. If you want to
purchase a formal edition, simply contact with your DrayTek dealer.
Note 1: Web Content Filter (WCF) is not a built-in service of Vigor router but a service
powered by Commtouch. If you want to use such service (trial or formal edition), you
have to perform the procedure of activation first. For the service of formal edition,
please contact with your dealer/distributor for detailed information.
Note 2: Commtouch is merged by Cyren and GlobalView services will be continued to
deliver powerful cloud-based information security solutions! Refer to:
http://www.prnewswire.com/news-releases/commtouch-is-now-cyren-239025151.html
Note 3: fragFINN service was terminated from 2015.
4
4
.
.
6
6
.
.
1
1
1
1
.
.
1
1
W
W
e
e
b
b
C
C
a
a
t
t
e
e
g
g
o
o
r
r
y
y
O
O
b
b
j
j
e
e
c
c
t
t
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Vigor2960 Series User’s Guide
234
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (16) of the object profiles to be
created.
Profile
Display the name of the object profile.
Child Protection
Display the items under certain category that you choose to
block for protecting the children.
Leisure
Display the items under certain category that you choose to
block.
Business
Display the items under certain category that you choose to
block.
Chatting
Display the items under certain category that you choose to
block.
Computer
Display the items under certain category that you choose to
block.
Other
Display the items under certain category that you choose to
block.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
W
W
e
e
b
b
C
C
a
a
t
t
e
e
g
g
o
o
r
r
y
y
O
O
b
b
j
j
e
e
c
c
t
t
P
P
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Objects Setting>> Web Category Object and click the Web Category Object
tab.
2. Simply click the Add button.
Vigor2960 Series User’s Guide
235
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the web category object profile. The
number of the characters allowed to be typed here is 10.
Child Protection
The web pages which are not suitable for children will be
classified into different categories. Simply check the one(s)
that you don’t want the children to visit.
Leisure
Simply check the one(s) that you don’t want the user to visit.
Business
Simply check the one(s) that you don’t want the user to visit.
Chatting
Simply check the one(s) that you don’t want the user to use
for gossip with remote people.
Computer
Simply check the one(s) that you don’t want the user to visit.
Other
Simply check the one(s) that you don’t want the user to visit.
Apply
Click it to save the configuration.
Cancel
Click it to exit the dialog without saving the configuration.
Vigor2960 Series User’s Guide
236
4. Enter all of the settings and click Apply.
5. A new Web Category Object profile has been created.
4
4
.
.
6
6
.
.
1
1
1
1
.
.
2
2
C
C
o
o
n
n
t
t
e
e
n
n
t
t
F
F
i
i
l
l
t
t
e
e
r
r
L
L
i
i
c
c
e
e
n
n
s
s
e
e
Move your mouse to the link of Activate URL and click it. The system will guide you to
access into MyVigor website.
After finishing the activation for the trial version of WCF, remember to purchase “Silver
Card” for WCF service from your DrayTek dealer or distributor.
4
4
.
.
6
6
.
.
1
1
1
1
.
.
3
3
Q
Q
u
u
e
e
r
r
y
y
S
S
e
e
r
r
v
v
e
e
r
r
It is recommended for you to use the default setting, auto-selected. You need to specify a
server for categorize searching when you type URL in browser based on the web content
filter profile.
Note: Due to the location difference, the response time for each query server will be
different and influence the effect of WCF.
Vigor2960 Series User’s Guide
237
4
4
.
.
6
6
.
.
1
1
2
2
Q
Q
Q
Q
O
O
b
b
j
j
e
e
c
c
t
t
Note: This page is designed for Chinese IM "Tencent QQ" users (especially for China)
only. For people who do not use QQ, skip this section.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (16) of the object profiles to be
created.
Profile
Display the name of the QQ object profile.
id
Display the account name of the QQ object profile.
Description
Display a brief explanation of the QQ object profile.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
Q
Q
Q
Q
o
o
b
b
j
j
e
e
c
c
t
t
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Objects Setting>> QQ Object.
2. Simply click the Add button.
Vigor2960 Series User’s Guide
238
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the QQ object profile. The number of the
characters allowed to be typed here is 10.
id
Create the account name for such QQ object profile.
Add – Click this button to add a new account.
Save – Click this button o save the new account.
Description
Type a brief explanation for the QQ object profile.
Apply
Click it to save the configuration.
Cancel
Click it to exit the dialog without saving the configuration.
4. Enter all of the settings and click Apply.
5. A new QQ Object profile has been created.
Vigor2960 Series User’s Guide
239
4
4
.
.
6
6
.
.
1
1
3
3
Q
Q
Q
Q
G
G
r
r
o
o
u
u
p
p
This page allows you to group several QQ object profiles.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (16) of the object profiles to be
created.
Group Name
Display the name of the group.
Description
Display the brief explanation for such group.
Objects
Display the objects selected by such group.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
Q
Q
Q
Q
g
g
r
r
o
o
u
u
p
p
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Objects Setting>> QQ Group.
2. Simply click the Add button.
3. The following dialog will appear.
Vigor2960 Series User’s Guide
240
Available parameters are listed as follows:
Item Description
Profile
Type the name of the time group. The number of the
characters allowed to be typed here is 10.
Description
Make a brief explanation for such profile if the group name
is set not clearly.
Objects
Use the drop down list to select the object profiles under
such group.
All the available objects that you have added on Objects
Setting>>QQ Object will be seen here.
To clear the selected one, click
to remove current object
selections.
Apply
Click it to save the configuration.
Cancel
Click it to exit the dialog without saving the configuration.
4. Enter all of the settings and click Apply.
5. A new QQ group profile has been created.
Vigor2960 Series User’s Guide
241
4
4
.
.
6
6
.
.
1
1
4
4
T
T
i
i
m
m
e
e
O
O
b
b
j
j
e
e
c
c
t
t
You restrict Internet access to certain hours so that users can connect to the Internet only
during certain hours, say, business hours. The schedule is also applicable to other functions,
e.g., Firewall.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (16) of the object profiles to be
created.
Profile
Display the name of the time object profile.
Frequency
Display the duration (or period) of the time object profile.
Start Date
Display the starting date of the time object profile.
Start Time
Display the starting time of the time object profile.
End Date
Display the ending date of the time object profile.
End Time
Display the ending time of the time object profile.
Weekdays
Display the frequency of such time object profile.
Vigor2960 Series User’s Guide
242
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
T
T
i
i
m
m
e
e
O
O
b
b
j
j
e
e
c
c
t
t
P
P
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Objects Setting>> Time Object.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the time object profile. The number of the
characters allowed to be typed here is 10.
Frequency
Specify how often (Weekdays or Once) the schedule will be
applied.
Start Date
Specify the starting date of the time object profile.
Start Time
Specify the starting time of the time object profile.
End Date
Specify the ending date of the time object profile.
End Time
Specify the ending time of the time object profile.
Weekdays
Specify which days in one week should perform the
schedule.
Vigor2960 Series User’s Guide
243
Apply
Click it to save the configuration.
Cancel
Click it to exit the dialog without saving the configuration.
4. Enter all of the settings and click Apply.
5. A new Time Object profile has been created.
4
4
.
.
6
6
.
.
1
1
5
5
T
T
i
i
m
m
e
e
G
G
r
r
o
o
u
u
p
p
This page allows you to group several time object profiles.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (8) of the object profiles to be
created.
Group Name
Display the name of the group.
Description
Display the brief explanation for such group.
Objects
Display the time objects selected by such group.
Vigor2960 Series User’s Guide
244
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
T
T
i
i
m
m
e
e
G
G
r
r
o
o
u
u
p
p
P
P
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Objects Setting>> Time Group.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the time group. The number of the
characters allowed to be typed here is 10.
Description
Make a brief explanation for such profile if the group name
is set not clearly.
Objects
Use the drop down list to check the time object profiles
under such group.
All the available time objects that you have added on
Objects Setting>>Time Object will be seen here.
Apply
Click it to save the configuration.
Cancel
Click it to exit the dialog without saving the configuration.
4. Enter all of the settings and click Apply.
5. A new time group profile has been created.
Vigor2960 Series User’s Guide
245
4
4
.
.
6
6
.
.
1
1
6
6
S
S
M
M
S
S
S
S
e
e
r
r
v
v
i
i
c
c
e
e
O
O
b
b
j
j
e
e
c
c
t
t
This page allows you to set ten profiles which will be applied in Application>>SMS/Mail
Alert Service.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
profile.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (8) of the object profiles to be
created.
Profile
Display the name of the profile.
Enable
Display the status of the profile. False means disabled; True
means enabled.
SMS Service Provider
Display the service provider which offers SMS service.
Username
Display the user name that the sender can use to register to
selected SMS provider.
Quota
Display the number of the credit that you purchase from the
service provider
Interval(s)
Display the time interval for sending the SMS.
Vigor2960 Series User’s Guide
246
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
S
S
M
M
S
S
s
s
e
e
r
r
v
v
i
i
c
c
e
e
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Objects Setting>> SMS Service Object.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type a name for such SMS profile. The maximum length of
the name you can set is 20 characters.
Enable
Check this box to enable such profile.
SMS Service
Provider
Use the drop down list to specify the service provider which
offers SMS service.
Username
Type a user name that the sender can use to register to
selected SMS provider.
The maximum length of the name you can set is 31
characters.
Password
Type a password that the sender can use to register to
selected SMS provider.
The maximum length of the password you can set is 31
characters.
Quota
Type the number of the credit that you purchase from the
service provider chosen above.
Note that one credit equals to one SMS text message on the
standard route.
Interval(s)
To avoid quota being exhausted soon, type time interval for
sending the SMS.
Apply
Click it to save the configuration.
Vigor2960 Series User’s Guide
247
Cancel
Click it to exit the dialog without saving the configuration.
4. Enter all of the settings and click Apply.
5. A new SMS object profile has been created.
4
4
.
.
6
6
.
.
1
1
7
7
M
M
a
a
i
i
l
l
S
S
e
e
r
r
v
v
i
i
c
c
e
e
O
O
b
b
j
j
e
e
c
c
t
t
This page allows you to set ten profiles which will be applied in Application>>SMS/Mail
Alert Service.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
profile.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (8) of the object profiles to be
created.
Profile
Display the name of the profile.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Mail From
Display the mail address of the sender.
SMTP Port
Display the port number used for the SMTP service.
SMTP Server
Display the IP address of the SMTP Server.
Vigor2960 Series User’s Guide
248
Item Description
SSL/TLS
Display the status of SSL/TLS service.
Authentication
Enable means such profile must be authenticated by the
server.
Disable means such profile will not be authenticated by the
server.
User Name
Display the name used for authentication.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
m
m
a
a
i
i
l
l
s
s
e
e
r
r
v
v
i
i
c
c
e
e
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Objects Setting>> Mail Service Object.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type a name for such SMS profile. The maximum length of
the name you can set is 20 characters.
Enable
Check this box to enable such profile.
Mail From
Type the e-mail address of the sender.
SMTP Port
Type the port number for SMTP server.
SMTP Server
Type the IP address of the mail server.
Connection
Security
Choose one of the security protocols (StartTLS or
SSL/TLS) for data encryption.
Vigor2960 Series User’s Guide
249
Authentication
The mail server must be authenticated with the correct
username and password to have the right of sending message
out. Click the Enable button to enable the function.
User Name – Type a name for authentication. The
maximum length of the name you can set is 31 characters.
User Password – Type a password for authentication. The
maximum length of the password you can set is 31
characters.
Apply
Click it to save the configuration.
Cancel
Click it to exit the dialog without saving the configuration.
4. Enter all of the settings and click Apply.
5. A new mail service object profile has been created.
Vigor2960 Series User’s Guide
250
4
4
.
.
6
6
.
.
1
1
8
8
N
N
o
o
t
t
i
i
f
f
i
i
c
c
a
a
t
t
i
i
o
o
n
n
O
O
b
b
j
j
e
e
c
c
t
t
This page allows you to set ten profiles which will be applied in Application>>SMS/Mail
Alert Service.
4
4
.
.
6
6
.
.
1
1
8
8
.
.
1
1
N
N
o
o
t
t
i
i
f
f
i
i
c
c
a
a
t
t
i
i
o
o
n
n
O
O
b
b
j
j
e
e
c
c
t
t
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
profile.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (8) of the object profiles to be
created.
Profile
Display the name of the profile.
WAN Disconnection
Display if such function is enabled or disabled.
WAN Reconnection
Display if such function is enabled or disabled.
VPN Disconnection
Display if such function is enabled or disabled.
VPN Reconnection
Display if such function is enabled or disabled.
Temperature
Display if such function is enabled or disabled.
Vigor2960 Series User’s Guide
251
Item Description
Router Reboot
Display if such function is enabled or disabled.
Syslog
Display if such function is enabled or disabled.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
n
n
o
o
t
t
i
i
f
f
i
i
c
c
a
a
t
t
i
i
o
o
n
n
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Objects Setting>>Notification Object.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type a name for such SMS profile. The maximum length of
the name you can set is 20 characters.
There are several situations to be monitored by such profile.
WAN
Disconnection
Enable – When disconnection happened to WAN interface,
the router system will send the alert message to the recipient.
WAN Reconnection
Enable - When reconnection happened to WAN interface,
the router system will send the alert message to the recipient.
VPN Disconnection
Enable – When disconnection happened to a VPN tunnel,
the router system will send the alert message to the recipient.
VPN Reconnection
Enable - When reconnection happened to a VPN tunnel, the
router system will send the alert message to the recipient.
Temperature
Enable - When the temperature is out of range, the router
system will send the alert message to the recipient.
Vigor2960 Series User’s Guide
252
Router Reboot
Enable - When the router reboots, the router system will
send the alert message to the recipient.
CPU Usage
Enable – When the CPU usage reaches a certain value, the
router system will send the alert message to the recipient.
Memory Usage
Enable – When the memory usage reaches a certain value,
the router system will send the alert message to the recipient.
TX Usage/RX
Usage
Enable – When TX/RX usage reaches a certain value, the
router system will send the alert message to the recipient.
High Availability
Enable – When such Vigor router becomes the “Master”
device in the application of HA, the router system will send
the alert message to the recipient.
Syslog
Enable – Such notification will be recorded in Syslog.
Apply
Click it to save the configuration.
Cancel
Click it to exit the dialog without saving the configuration.
4. Enter all of the settings and click Apply.
5. A new notification object profile has been created.
4
4
.
.
6
6
.
.
1
1
8
8
.
.
2
2
A
A
d
d
v
v
a
a
n
n
c
c
e
e
d
d
S
S
e
e
t
t
t
t
i
i
n
n
g
g
Such page is used to set the limit value for CPU, Memory, TX / RX. When CPU, Memory,
TX / RX usage reaches the threshold, the router system will send the alert message to the
recipient.
Vigor2960 Series User’s Guide
253
4
4
.
.
7
7
U
U
s
s
e
e
r
r
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
User Management can manage all the accounts (user profiles) to connect to Internet via
different protocols.
Below shows the menu items for User Management:
4
4
.
.
7
7
.
.
1
1
W
W
e
e
b
b
P
P
o
o
r
r
t
t
a
a
l
l
Web Portal is a gateway which organizes the network access of LAN hosts. The identity of
LAN host can be recognized by web portal mechanism and then be managed for functions
like firewall or load balance.
This page can determine the general rule for the users controlled by User Management. The
mode selected in this page will influence the contents of the filter rule(s) applied to every
user.
4
4
.
.
7
7
.
.
1
1
.
.
1
1
O
O
n
n
l
l
i
i
n
n
e
e
U
U
s
s
e
e
r
r
S
S
t
t
a
a
t
t
u
u
s
s
The Online User Status is a monitoring tool which only works after you choose HTTP or
HTTPS as the Mode setting on General Setup page of User Management>>Web Portal.
Refer to section 4.7.1.2 General Setup to get more detailed information of setting web portal.
Vigor2960 Series User’s Guide
254
Available parameters will be explained as follows:
Item Description
Auto Refresh
Specify the interval of refresh time to obtain the latest status.
The information will update immediately when the Refresh
button is clicked.
Refresh
Renew current web page.
User Name
Display the name information for the user who logs into the
WUI of Vigor2960.
IP
Display the IP address of the user who logs into the WUI of
Vigor2960.
Allow Time
Display the total network connection time allowed for the
log-in user.
Login Time
Display the starting time of the network connection.
End Time
Display the ending time of the network connection.
Rest Time
Display the rest time of the network connection.
Auth Type
Display the authentication type (local, RADIUS, LDAP,
Login Disable, Guest) used by such user.
LDAP Group
Display the LDAP group used by such user.
Logout/Clear
It is a button which is used to disconnect the connection
manually.
Vigor2960 Series User’s Guide
255
4
4
.
.
7
7
.
.
1
1
.
.
2
2
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
This page configures the main settings of web portal function.
Available parameters will be explained as follows:
Item Description
Web Portal
Click Enable to enable such function.
Use LAN DNS
Choose one of the LAN DNS profile
Login Mode
There are several login modes offered here for you to
choose.
Non Auth – Authentication is not required.
HTTP/HTTPS- If you choose such mode, the user can
access into Vigor router by HTTP or HTTPS.
HTTPS Redirect
This option is available when the Login Mode is set as
HTTP or HTTPS.
Enable – Only HTTPS sessions will be processed by Vigor
router when multiple users access into Vigor router via the
web portal.
Authentication Type
This option is available when the Login Mode is set as
HTTP or HTTPS. Note that the authentication sequence
adopted by the system will be Local first, Guest second,
RADIUS third, then LDAP the last. However, if you check
SMS, the router will authenticate the user with SMS rules
and the others (Local, Guest, RADIUS, LDAP) at the same
time.
LDAP Profiles - It is available when LDAP is selected as
Authentication Type. You have to specify one profile
(defined in User Management>>LDAP/Active Directory)
Vigor2960 Series User’s Guide
256
from the drop down list for LDAP authentication.
Bulletin Board
Disable – The function of Bulletin Board is disabled.
Enable – The function of Bulleting Board is enabled. The
message on the Bulleting Board will be displayed on the
screen when the user logs into the web user interface of
Vigor router.
Show Bulletin in Captive Portal Page – It is available
when Bulletin Board is enabled and HTTP/HTTPS is
selected as Login Mode. It is used to determine
showing bulletin in web portal login page or not.
Allow non-HTTP traffic before Portal Page shows –
It is available when Bulletin Board is enabled and Non
Auth is selected as Login Mode. When it is enabled,
non-HTTP traffic is allowed before the portal page
appears.
Block Mobile Device
Enable – Vigor router will detect and block if there is any
mobile device trying to access into Internet via Vigor router.
Alert Message – If a mobile device is detected, a warning
message (typed in this field) will be displayed on the screen
of mobile device. The default content is “Mobile Device
Detected”.
URL Redirection After
Login
User Requested – After passed the authentication made by
Vigor router, the user will be redirected to original requested
web page.
Bulletin – If it is selected, users will be forced to see the
information displayed on bulletin after passing through web
Vigor2960 Series User’s Guide
257
portal.
Custom URL - Any user who wants to access into Internet
through this router will be forcefully redirected to the URL
specified here first no matter what URL he types. It is a
useful method for the purpose of advertisement. For
example, force the wireless user(s) in hotel to access into the
web page that the hotel wants the user(s) to visit.
Custom URL – Type the URL of specified web page
for redirection if Custom URL is selected as URL
Redirection After Login.
SMS Setting – It is available when SMS is selected as the Authentication Type. When a
user wants to log into Internet, he/she will be asked for passing the authentication process
by using the applied validation code. The following settings are used to specify will be
sent to specified users through SMS.
SMS Provider
Use the drop down list to specify the service provider which
offers SMS service.
SMS Button Name
It is a button with short message which will appear to remind
the user that SMS is allowed to get username and password
for accessing into Vigor router.
SMS resend interval
Type a time interval in this field. The advantage of such
feature is that SMS will not be sent frequently within a short
time and cost too much.
SMS Content
Type the content of the SMS. The default URL encode
format for SMS is “UTF-8”.
Before typing the content, make sure the encode format that
the SMS server offers. If it does not support “UTF-8”,
transcoding shall be done first. If you have any question,
contact the SMS service provider.
Customized Field 1/2/3
The administrator can collect data (such as name, e-mail,
address, age, job and etc.) offered by users who ask for
validation code to access into Internet. There are three fields
allowed for acquiring data coming from mobile user. Each
field can be enabled / disabled separately.
Enable – Make the title (defined in Customized Field 1/2/3
Label) be seen on the mobile phone. When the field is
enabled, the mobile user must offer the data related to the
defined label to get the validation code.
Disable – The title (defined in Customized Field 1/2/3
Label) will not be shown on the mobile phone. The mobile
user can get the validation code after typing the phone
number and click the confirmation button (which is defined
in SMS Button Name).
Enable and Required - The mobile user MUST type the
phone number and fill in all the required information on the
screen and click the confirmation button (which is defined in
SMS Button Name). Then Vigor router will send SMS of
validation code to the mobile user.
Customized Field 1/2/3
Label
Type a brief text as the title for the above customized field.
Vigor2960 Series User’s Guide
258
Log File Limit
Information collected from mobile users (through the request
of validation code) will be stored in a log file. It is used to
restrict the maximum size of the log file.
Export Log File
The log of SMS can be exported as a file with the file format
of “.csv”.
Timeout Setting
Daily Logout
Enable - Force the online user logging out the web user
interface of Vigor router everyday.
Daily Time to Logout - It is available when Daily
Logout is enabled. Type that time setting (HH:MM) for
the router to force online user leaving Vigor router.
Fully Recharge Time Quota After…. - It is available
when Daily Logout is enabled. The time quota of all
local users will be recharged whenever Daily Logout is
executed.
Period Logout
Enable - Force the online user logging out the web user
interface of Vigor router after passing a period of time.
Period Time to Logout - It is available when Period
Logout is enabled.
Idle Logout
Enable - Force the online user logging out the web user
interface of Vigor router when the router is idle. Enable such
feature if time quota is used.
Idle Time – Set a time period. When the time is up,
Vigor router will terminate the network connection for
the online user.
Whitelist Setting
White List
Select the source IP objects/groups that are ignored by web
portal function.
White List IPv6
Select the source IP objects/groups that are ignored by web
portal function.
Apply
Click it to save the configuration.
Cancel
Click it to discard the settings configured in this page.
Note: To turn off the web portal function, disable Login Mode and Bulletin Board at the
same time.
4
4
.
.
7
7
.
.
1
1
.
.
3
3
P
P
o
o
r
r
t
t
a
a
l
l
P
P
a
a
g
g
e
e
S
S
e
e
t
t
u
u
p
p
This page allows you to configure specified messages (HTML-supported) in web portal
pages, and shows them to users accessing into Internet via web portal.
No matter what the purpose of the wireless/LAN client is, he/she will be forced into the URL
configured here while trying to access into the Internet or the desired web page through this
router. That is, a company which wants to have an advertisement for its products to users can
specify the URL in this page to reach its goal
Vigor2960 Series User’s Guide
259
Available parameters will be explained as follows:
Item Description
Welcome Message
Type words or sentences here. The message will be
displayed on the top of the login page.
Upload Bulletin Message
Upload Selected File - It is available when Enable is
selected in Upload Bulletin Message. Choose a file to
upload to Vigor2960.
Bulletin Message
It is available when Disable is selected in Upload Bulletin
Message.
The bulletin message is shown on login page or
authorization page. In login page, it can be disabled by Show
Bulletin In Login Page.
Authorization Message
The welcome message is shown in authorization page which
is the page after a user passing the authentication
successfully.
Guest Message
A welcome message is shown on the screen after the guest
passing the authentication successfully.
Customized Login
Image
Specify an image file which will be displayed on the login
page when a user or guest tries to access into Internet.
Upload Login Image – Choose a file to upload to
Vigor2960. It is useful for advertisement.
Customized Background
Image
Specify an image file which will be display on the login page
as a background. It is useful for advertisement.
Upload Background Image – Choose a file to upload to
Vigor2960.
Login Page Preview
Click it to have a preview of login page (including welcome
message, and bulletin message).
Reset All to Default
Reset the above message fields to default settings. Check the
box and then press Apply.
Apply
Click it to save the configuration.
Cancel
Click it to discard the settings configured in this page.
Vigor2960 Series User’s Guide
260
After finished the above settings, click Apply to save the configuration.
4
4
.
.
7
7
.
.
1
1
.
.
4
4
L
L
o
o
g
g
i
i
n
n
H
H
i
i
s
s
t
t
o
o
r
r
y
y
This page shows the history that wireless clients access into Vigor2960.
4
4
.
.
7
7
.
.
2
2
U
U
s
s
e
e
r
r
P
P
r
r
o
o
f
f
i
i
l
l
e
e
This function allows to configure all accounts (user profiles) in Vigor2960, including
PPTP/L2TP, System user, and so on.
4
4
.
.
7
7
.
.
2
2
.
.
1
1
U
U
s
s
e
e
r
r
P
P
r
r
o
o
f
f
i
i
l
l
e
e
User profile is used to configure different authorities, including web portal, VPN dial-in,
PPPoE server, System Administration, etc., for different users.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
Vigor2960 Series User’s Guide
261
Item Description
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number of the user profiles to be created.
Username
Display the name of the user.
Enable
Display the status of the profile. False means disabled; True
means enabled.
System User
Display the status of the System User. False means disabled;
True means enabled.
Web Portal Login
Display the status (Enable/Disable) of the account usage for
web portal login.
Time Quota
Display the status (Enable/Disable) of time quota mechanism
for web portal use.
Remaining Time
Display the remaining time for the user profile.
Recharge – It can recharge the remaining time quota of the
user on-the-fly (will not log out online users).
PPTP Dial-in
Display the status of PPTP connection for such user profile.
L2TP Dial-in
Display the status of L2TP connection for such user profile.
SSL Tunnel
Display if SSL Tunnel is activated (enable or disable) or not.
Use mOTP
Display if mOTP is activated (enable or disable) or not.
PPPoE Server Login
Display the status of PPPoE connection for such user profile.
(enable or disable)
FTP Server Login
Display if FTP Server Login is activated (enable or disable)
or not.
SMABA Server Login
Display if SMABA Server Login is activated (enable or
disable) or not.
Radius Server Login
Display if Radius Server Login is activated (enable or
disable) or not.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
U
U
s
s
e
e
r
r
P
P
r
r
o
o
f
f
i
i
l
l
e
e
1. Open User Management>>User Profile.
2. Simply click the Add button.
Vigor2960 Series User’s Guide
262
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Username
Type a name for such user profile (e.g.,
LAN_User_Group_1, WLAN_User_Group_A,
WLAN_User_Group_B, etc). When a user tries to access
Internet through this router, an authentication step must
be performed first. The user has to type the Username
specified here to pass the authentication. When the user
passes the authentication, he/she can access Internet via
this router. However the accessing operation will be
restricted with the conditions configured in this user
profile.
Enable
Check this box to enable such profile.
Password
Type a password for such profile (e.g., lug123,
wug123,wug456, etc). When a user tries to access
Internet through this router, an authentication step must
be performed first. The user has to type the password
specified here to pass the authentication. When the user
passes the authentication, he/she can access Internet via
this router with the limitation configured in this user
profile.
Vigor2960 Series User’s Guide
263
System User
Only the user profile with privilege level has the right to
operate the function of the router as the administrator of
the router.
False – Choose it to disable the function of System User.
Such user profile does not have the right to operate the
router’s function.
True – Choose it to enable the function of System User.
Privilege Level – If true is selected for System User,
you have to specify the privilege level (Guest
operator/User/Operator/Admin) for such profile.
Admin has the greatest authority for router operation;
Guest operator has the smallest authority for router
operation.
PPTP/L2TP/SSL/PPPoE Server General Setup
Idle Timeout (sec)
If the user is idle over the limitation of the timer, the
network connection will be stopped for such user. By
default, the Idle Timeout is set to 300 seconds.
DHCP from
Choose a LAN profile for DHCP server IP dispatching.
Remote clients using this profile to do PPTP/L2TP
dial-in will be assigned IP addresses according to this
DHCP pool.
Static IP Address
Type an IP address for such user profile which accesses
Internet with PPTP/L2TP connection.
User Management
Allow Web Portal Login
Enable – Click it to enable web portal login with such
profile.
Disable – Click it to disable the option.
Time Quota
Enable – Click it to enable time quota function.
Set Time Quota (min) – Type the time value.
Remaining Time – Display the remaining time for
the user profile.
Disable – Click it to disable the function.
Note: The range of Time Quota is 1~14400 minutes.
Max Simultaneous
Login
It means the maximum online number of clients logging
with this profile.
The range is from 1 to 255. -1 means no limit; 0 means
No access.
Vigor2960 Series User’s Guide
264
Logout Earliest User
Force the earliest user to logout when exceeded the
maximum number of online user setting.
Enable – Click it to enable such function.
Disable – Click it to disable such function.
PPTP/L2TP/SSL Server
PPTP Dial-in / L2TP
Dial-in / SSL Tunnel
Click Enable to make network connection through
PPTP/L2TP/SSL Tunnel protocol for users who access
into Internet via such profile.
OpenVPN Dial-in
OpenPVN is a mechanism which is easy for users to
build safe and reliable virtual network, even if the brand
or model of router used by both ends are totally
different.
Enable – Click it to enable such function.
Disable – Click it to disable such function.
XAuth / EAP
Click Enable to allow the remote user accessing into
Internet via IPsec authentication.
Enable – Click it to enable such function.
Disable – Click it to disable such function.
Use mOTP
Click Enable to make the authentication with mOTP
function.
mOTP PIN Code - Type the code for authentication
(e.g., 1234).
mOTP Secret - Use the 32 digit-secret number
generated by mOTP in the mobile phone (e.g.,
e759bb6f0e94c7ab4fe6).
Time Objects
Choose a time object or time objects for such user
profile. Users in this profile can access into Vigor router
within the time period defined by the selected time
object.
SSL Proxy
It is available when System User is set with false. The
web proxy over SSL will be applied for VPN.
To clear the selected one, click
to remove current
object selections.
SSL Application (VNC)
It is available when System User is set with false.
Choose one of the SSL Application profiles (VNC) for
applying into this profile.
To clear the selected one, click
to remove current
object selections.
SSL Application (RDP)
It is available when System User is set with false.
Choose one of the SSL Application profiles (RDP) for
applying into this profile.
To clear the selected one, click
to remove current
object selections.
Vigor2960 Series User’s Guide
265
Remote IP/Host Name
Specify an IP address for remote dial-in VPN client.
Client with such user profile can only use such IP or host
name to access into such Vigor router. If not, the VPN
connection is not allowed.
PPPoE Server
PPPoE Server Login
Click Enable to activate related PPPoE configuration.
Quota Reset Frequency
It is used to configure the cycle time for PPPoE quota.
Note that each time when the quota is reset, the value of
Current Time Used/Current Traffic Quota will be reset
to initial situation (0).
Everyday – The quota for PPPoE will be reset every
day.
Everymonth – The quota for PPPoE will be reset
every month.
Time Quota (min)
Type a time quota for PPPoE connection.
Note: The range of Time Quota is 1~14400 minutes.
Current Time Used
(min)
Display the cumulative amount of time that the user
used.
Reset - Click it to reset the setting to default value (0).
Traffic Quota(MB)
It is used to set the maximum traffic (MB) for such user
profile.
Current Traffic Used
(MB)
Display the cumulative amount of data traffic that the
user used.
Reset - Click it to reset the setting to default value (0).
MAC Binding
Specify a MAC address which is limited and used for
such PPPoE account.
Enable – Click it to enable the function.
MAC Address – If MAC Binding is enabled, simply
type the MAC address of the router in this field.
FTP/SAMBA User Setting
FTP/SAMBA Server
Login
Click Enable to allow the remote user accessing into
Internet via FTP/SAMBA server.
Radius User Setting
Radius Server Login
Click Enable to allow the remote user accessing into
Internet via Radius server.
Apply
Click it to save the configuration.
Cancel
Click it to exit the dialog without saving the
configuration.
4. Enter all of the settings and click Apply.
Vigor2960 Series User’s Guide
266
5. A new User Profile has been created. Below shows an example of user profile.
4
4
.
.
7
7
.
.
2
2
.
.
2
2
A
A
p
p
p
p
l
l
y
y
A
A
l
l
l
l
This page allows you to modify many options for ALL user profiles in one apply operation.
It is useful for administrator to edit the options of all users without opening profile one by
one.
You can click Apply to save the settings and apply all of the modifications to all user
profiles.
Available parameters are listed as follows:
Item Description
Modify Web Portal
Login Status
Check the box to configure detailed setting.
Enable – Click it to enable the web portal login function for
remote client.
Modify Time Quota
Status
Check the box to configure detailed setting.
Enable – Click it to enable the time quota function for all
user profiles.
Modify Time Quota
Value
Check the box to configure detailed setting. You have to
check this box and type the time quota value in Time Quota
Value(min).
Modify Max User Login
Check the box to configure detailed setting.
Max User Login - -1 means no limit; 0 means No access.
Modify Idle Timeout
Check the box to configure detailed setting.
Idle Timeout - If the user is idle over the limitation of the
timer, the network connection will be stopped for such
user. By default, the Idle Timeout is set to 300 seconds.
Modify PPTP Status
/Modify L2TP Status
/Modify SSL Tunnel
Status
Check the box to configure detailed setting.
Enable – Click it to enable the PPTP/L2TP/SSL tunnel
network connection all user profiles.
Vigor2960 Series User’s Guide
267
Modify mOTP Status
Check the box to configure detailed setting.
Enable – Click it to enable the mOTP function all user
profiles.
Modify PPPoE / FTP /
Radius/ SAMBA Server
Login Status, and
Modify XAuth Status
Check the box to configure detailed setting.
Enable – Click it to enable the PPPoE / FTP / Radius /
SAMBA/XAuth authentication function all user profiles.
Apply to
All – Apply all of the modifications to all user profiles.
Partial – Apply all of the modifications to specified user
profile.
After finished the above settings, click Apply to save the configuration.
Vigor2960 Series User’s Guide
268
E
E
x
x
a
a
m
m
p
p
l
l
e
e
:
:
H
H
o
o
w
w
t
t
o
o
G
G
e
e
n
n
e
e
r
r
a
a
t
t
e
e
M
M
a
a
s
s
s
s
L
L
A
A
N
N
C
C
l
l
i
i
e
e
n
n
t
t
s
s
w
w
i
i
t
t
h
h
U
U
s
s
e
e
r
r
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
o
o
n
n
V
V
i
i
g
g
o
o
r
r
2
2
9
9
6
6
0
0
/
/
V
V
i
i
g
g
o
o
r
r
3
3
9
9
0
0
0
0
The following table shows the function differences between User Profile and Guest Profile
(created by using Mass Guest Generator):
User Profile Mass User Generator
Number of
Account
Create at most 500 user accounts
at a time
Create at most 255 user accounts
at a time
Account
Manually Auto-generated with regularity
Password
Distinct password created by
Administrator
Randomly generated, and the
length is defined by
Administrator
Max Simultaneous
users per account
1~255 or unlimited (-1) Not support
Privilege
Internet Access, VPN, PPPOE
client…
Internet Access only
Usage Restriction
/Expired Time
Time Quota (1~14400 minutes) Time Quota (1~14400 minutes)
Validity Period (days)
Authentication
YES YES
Max Simultaneous
user
YES NO
Bind IP
YES NO
1. Open User Management >> User Profile, and click Add.
2. Set up user profile as shown below. Type Username; check Enable and
type Password. Then, type Max User Login. Click Apply to save the settings.
Vigor2960 Series User’s Guide
269
3. Open Objects Setting >> IP Object, and click Add.
4. Set up IP Object for Executive. Type the name of the Profile (e.g., boss in this case);
choose Single as the Address Type; and type 192.168.1.11 as Start IP Address.
Click Apply to save the settings.
5. Open User Management >> Guest Profile and click the Mass Guest Generator tab
to open the following page. Type the Group Name (in this case, Room); Guest Name
Prefix, and Number of Generate (in this case, 100); click Enable for Validity Period
to type the Start Time and End time, and click Apply to save the settings.
Vigor2960 Series User’s Guide
270
6. Open User Management >> Guest Profile and click Guest Group to check the Mass
User account Group.
By clicking each account (e.g., choose 1001 and click Edit), we can check the
information for this account, and we may also modify the account name and password
manually.
Vigor2960 Series User’s Guide
271
Note that Administrator is able to Export the information for the whole group to a .csv
file, which is useful to redistribute the account and password combinations to guests.
Vigor2960 Series User’s Guide
272
7. Open User Management >> Web Portal and click the General Setup tab to open the
following page. Check Local and Guest as Authentication Type. Check IP object
named of Boss to put it into the white list, and this will allow this IP address to access
to the Internet without authentication.
8. After finishing configuration, Vigor2960 will redirect users to the authentication page
when they try accessing to the Internet.
Vigor2960 Series User’s Guide
273
For Employees to access into Internet:
For Room guest to access into Internet:
4
4
.
.
7
7
.
.
3
3
U
U
s
s
e
e
r
r
G
G
r
r
o
o
u
u
p
p
The User Group can consist of several user profiles, which help the administrator to manage
a large number of users conveniently.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
Vigor2960 Series User’s Guide
274
Item Description
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (500) of the profiles to be created.
Usergroup
Display the name of the user group.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Member
Display the user profiles under such group.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
U
U
s
s
e
e
r
r
G
G
r
r
o
o
u
u
p
p
P
P
r
r
o
o
f
f
i
i
l
l
e
e
1. Open User Management>>User Group.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Usergroup
Type the name of such profile.
Enable
Check this box to enable such profile.
Member
Use the drop down list to check the user profile(s) under
such group.
To clear the selected one, click
to remove current object
selections.
Apply
Click it to save the configuration.
Cancel
Click it to exit the dialog without saving the configuration.
4. Enter all of the settings and click Apply.
Vigor2960 Series User’s Guide
275
5. A new User Profile has been created.
4
4
.
.
7
7
.
.
4
4
G
G
u
u
e
e
s
s
t
t
P
P
r
r
o
o
f
f
i
i
l
l
e
e
Guest Profile allows the users to access Internet within validity period and limit the user
accessing into the specified URL configured by web portal.
4
4
.
.
7
7
.
.
4
4
.
.
1
1
G
G
u
u
e
e
s
s
t
t
G
G
r
r
o
o
u
u
p
p
Available parameters are listed as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
Clean Deadline
Renew the usage time designated for such profile.
Profile Number Limit
Display the total number (30) of the profiles to be created.
Group
Display the name of the guest group.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Comment
Display the description for the profile.
Usage Period
Display the status (Enable/Disable) for the function of usage
time.
Usage Time(min)
Display the usage time for the guest accessing into Internet
each time.
Vigor2960 Series User’s Guide
276
Item Description
Validity Period
Display the valid period for the guest accessing into Internet.
Start Time/ End Time
Display the detailed time setting (starting and ending).
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
G
G
u
u
e
e
s
s
t
t
G
G
r
r
o
o
u
u
p
p
P
P
r
r
o
o
f
f
i
i
l
l
e
e
1. Open User Management>>Guest Group. Click the Guest Group tab.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Group
Type the name of such profile.
Enable
Check this box to enable such profile.
Comment
Give a brief description for the profile.
Usage Period
It determines the usage time for the guest accessing into
Internet each time. Click Enable to enable such option.
Usage Time(min)- Determines the connection time allowed
for accessing Internet every time. The default setting is 180
minutes. When the time is up, the user will be forced to exit
Internet.
Validity Period
Validity Period determines the effective time for the user
account/guest. Within the period of the validity, the
user/guest can access into Internet whenever he wants.
Start Time/End Time – Specify the valid period by typing
the time with the format of YYYY-MM-DD-HH-MM.
When it is set with “--“, that means such time setting is no
limit.
Max Simultaneous
Login
It means the maximum online number of clients logging with
this profile.
The range is from 1 to 255. -1 means not limit; 0 means No
Vigor2960 Series User’s Guide
277
access.
Logout Earliest
User
Force the earliest user to logout when exceeded the
maximum number of online user setting. (The number is
defined in Max Simultaneous Login).
Enable – Click it to enable such function.
Disable – Click it to disable such function.
Apply
Click it to save the configuration.
Cancel
Click it to exit the dialog without saving the configuration.
4. Enter all of the settings and click Apply.
5. A new guest group profile has been created.
6. You can create several guest names by clicking
on the left side of the selected guest
group profile. A setting page will appear for you to add new guest list.
7. Move your mouse to click Add.
Vigor2960 Series User’s Guide
278
8. The following page for configuration will appear.
Available parameters are listed as follows:
Item Description
Guest Name
Type the name of the guest under the guest group.
Comment
Give a brief description for the guest.
Apply to Web
Portal
Enable – Click it to make such profile being applied to web
portal.
Disable – Click it to disable the option.
Clean Deadline
The guest profile can be unlocked to be used by other users.
9. Enter all of the settings and click Apply.
10. A new guest has been added under the Guest Group (named Carrie in this case).
Vigor2960 Series User’s Guide
279
4
4
.
.
7
7
.
.
4
4
.
.
2
2
M
M
a
a
s
s
s
s
G
G
u
u
e
e
s
s
t
t
G
G
e
e
n
n
e
e
r
r
a
a
t
t
o
o
r
r
This option is useful to create a lot of guest profiles with the most expeditious manner.
Available parameters are listed as follows:
Item Description
Name Settings
Group Name – Type the name of the guest group.
Guest Name Prefix – The guest names created with such
manner requires a prefix as the basis of name input.
Note: Guest Name Prefix disallows these 6 characters
"^?$%.&".
Start Index – Type a number which will be treated as the
starting number for generating mass guest profiles.
Note: The range of Start index is 1~10000.
Number to Generate – Type the total number of guests to
be generated at one time.
The guest name will be named by combining “Guest Name
Prefix” + “Start Index”, for example:
Guest Name Prefix => teashop_
Start Index => 100
Number to Generate => 50
Then, the guests names generated will be:
teashop_100 (starting)
teashop_101
teashop_102
...
teashop_150 (ending)
Random Password
Settings
Length – Type a number to determine the length of the
random passwords which will be assigned to the mass guest
profiles by the system. The range of Password Length is
6~12.
Vigor2960 Series User’s Guide
280
Item Description
Usage Settings
Usage Period –It determines the usage time for the guest
accessing into Internet each time. Click Enable to enable
such option.
Usage Time(min)-The default setting is 180 minutes.
Validity Period –It determines the valid period for the guest
accessing into Internet. That is, the guest cannot access into
the Internet anytime outside the valid period. Click Enable
to enable such option.
Start Time/End Time – Specify the valid period by
typing the time with the format of
YYYY-MM-DD-MM.
Max Simultaneous
Login
It means the maximum online number of clients logging with
this profile.
The range is from 1 to 255. -1 means no limit; 0 means No
access.
Apply
Click it to save the configuration.
Cancel
Click it to discard the settings configured in this page.
4
4
.
.
7
7
.
.
4
4
.
.
3
3
E
E
x
x
p
p
o
o
r
r
t
t
This function is used to export the guest profile names and random passwords.
Available parameters are listed as follows:
Item Description
Guest Group
Choose a group that you want to export the settings,
including guest profile names and random passwords as a
file for reference.
Vigor2960 Series User’s Guide
281
4
4
.
.
7
7
.
.
5
5
R
R
A
A
D
D
I
I
U
U
S
S
Remote Authentication Dial-In User Service (RADIUS) is a security authentication
client/server protocol that supports authentication, authorization and accounting, which is
widely used by Internet service providers. It is the most common method of authenticating
and authorizing dial-up and tunneled network users.
The built-in RADIUS client feature enables the router to assist the remote dial-in user or a
wireless station and the RADIUS server in performing mutual authentication. It enables
centralized remote access authentication for network management.
4
4
.
.
7
7
.
.
5
5
.
.
1
1
R
R
a
a
d
d
i
i
u
u
s
s
P
P
r
r
o
o
f
f
i
i
l
l
e
e
Vigor router can specify external RADIUS server for performing security authentication.
Available parameters are listed as follows:
Item Description
Enable
Check this box to enable such profile.
Use Local Radius Server
Enable- Choose it to use local RADIUS server for user
authentication.
Disable – Choose it to specify another server for user
authentication.
Server IP Address
Enter the IP address of RADIUS server.
Destination Port
The UDP port number that the RADIUS server is using. The
default value is 1812, based on RFC 2138.
Shared Secret
The RADIUS server and client share a secret that is used to
authenticate the messages sent between them. Both sides
must be configured to use the same shared secret.
Logout After(min)
It means the maximum usage duration for RADIUS
authentication.
Apply
Click it to save the configuration.
Cancel
Click it to discard the settings configured in this page.
After finished the above settings, click Apply to save the configuration.
Vigor2960 Series User’s Guide
282
4
4
.
.
7
7
.
.
5
5
.
.
2
2
R
R
a
a
d
d
i
i
u
u
s
s
S
S
e
e
r
r
v
v
e
e
r
r
In addition to specifying an external RADIUS server for security authentication, Vigor router
also can be treated as a RADIUS server for performing security authentication and offer the
RADIUS service for wireless clients.
Available parameters are listed as follows:
Item Description
Enable RADIUS Server
Check this box to make Vigor router as a RADIUS server.
Interface
Only the clients from the selected interface can be
authenticated by Vigor RADIUS server.
Port
Clients can use the specified port number to exchange
RADIUS information.
Authentication Client
Only the clients specified in this field can be authenticated
by Vigor RADIUS server.
Apply
Click it to save the configuration.
Cancel
Click it to discard the settings configured in this page.
After finished the above settings, click Apply to save the configuration.
Note: “Allow Radius Server Login” can be enabled from the configuration page in User
Management>>User Profile. It allows the clients to be authenticated by internal
RADIUS server of Vigor router.
Vigor2960 Series User’s Guide
283
4
4
.
.
7
7
.
.
6
6
L
L
D
D
A
A
P
P
/
/
A
A
c
c
t
t
i
i
v
v
e
e
D
D
i
i
r
r
e
e
c
c
t
t
o
o
r
r
y
y
Lightweight Directory Access Protocol (LDAP) is a communication protocol for using in
TCP/IP network. It defines the methods to access distributing directory server by clients,
work on directory and share the information in the directory by clients. The LDAP standard
is established by the work team of Internet Engineering Task Force (IETF).
As the name described, LDAP is designed as an effect way to access directory service
without the complexity of other directory service protocols. For LDAP is defined to perform ,
inquire and modify the information within the directory, and acquire the data in the directory
securely, therefore users can apply LDAP to search or list the directory object, inquire or
manage the active directory.
Available parameters are listed as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (32) of the profiles to be created.
Profile
Display the name of the profile.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Bind Type
Display the type setting selected for such profile.
Server IP Address
Display the IP address of the LDAP server.
Port
Display the port number set for such profile.
Vigor2960 Series User’s Guide
284
Item Description
Common Name
Identifier
Display the name for identification.
Base DN
Display the configured Base DN if Bind Type is set with
Simple Mode.
Group DN
Display the configured Group DN if Bind Type is set with
Simple Mode.
Regular DN
Display the configured regular DN if Bind Type is set with
Regular Mode.
Regular Password
Display the configured regular password if Bind Type is set
with Regular Mode.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
L
L
D
D
A
A
P
P
/
/
A
A
c
c
t
t
i
i
v
v
e
e
D
D
i
i
r
r
e
e
c
c
t
t
o
o
r
r
y
y
P
P
r
r
o
o
f
f
i
i
l
l
e
e
1. Open User Management>>LDAP/Active Directory.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type a name for such profile.
Enable
Check this box to enable such profile.
Vigor2960 Series User’s Guide
285
Use SSL
Check this box to enable SSL tunnel for such profile.
Bind Type
There are three types of bind type supported.
Simple Mode – Just simply do the bind authentication
without any search action.
Anonymous – Perform a search action first with
Anonymous account then do the bind authentication.
Regular Mode– Mostly it is the same with anonymous
mode. The different is that, the server will firstly check if
you have the search authority.
For the regular mode, you’ll need to type in the Regular DN
and Regular Password.
Server IP Address
Enter the IP address of LDAP server.
Port
Type a port number as the destination port for LDAP server.
Common Name
Identifier
Type or edit the common name identifier for the LDAP
server. The common name identifier for most LDAP server
is “cn”.
Base DN
It means “Base Distinguished Name”. Type the
distinguished name used to look up entries on the LDAP
server.
Group DN
It means “Group Distinguished Name”. Type the
distinguished name used to look up entries on the LDAP
server.
Regular DN
Type this setting if Regular Mode is selected as Bind Type.
Regular Password
Specify a password if Regular Mode is selected as Bind
Type.
Logout After (min)
It means the maximum usage duration for LDAP
authentication.
Apply
Click it to save the configuration.
Cancel
Click it to exit the dialog without saving the configuration.
4. Enter all of the settings and click Apply.
5. A new LADP/Active Directory Profile has been created.
Vigor2960 Series User’s Guide
286
4
4
.
.
8
8
A
A
p
p
p
p
l
l
i
i
c
c
a
a
t
t
i
i
o
o
n
n
Below shows the menu items for Applications.
4
4
.
.
8
8
.
.
1
1
D
D
y
y
n
n
a
a
m
m
i
i
c
c
D
D
N
N
S
S
The ISP often provides you with a dynamic IP address when you connect to the Internet via
your ISP. It means that the public IP address assigned to your router changes each time you
access the Internet. The Dynamic DNS feature lets you assign a domain name to a dynamic
WAN IP address. It allows the router to update its online WAN IP address mappings on the
specified Dynamic DNS server. Once the router is online, you will be able to use the
registered domain name to access the router or internal virtual servers from the Internet. It is
particularly helpful if you host a web server, FTP server, or other server behind the router.
Before you use the Dynamic DNS feature, you have to apply for free DDNS service to the
DDNS service providers. The router provides up to ten accounts from eight different DDNS
service providers. Basically, Vigor routers are compatible with the DDNS services supplied
by most popular DDNS service providers such as www.dyndns.org, www.no-ip.com,
www.dtdns.com, www.changeip.com, www.dynamic- nameserver.com. You should visit
their websites to register your own domain name for the router.
Vigor2960 Series User’s Guide
287
4
4
.
.
8
8
.
.
1
1
.
.
1
1
S
S
t
t
a
a
t
t
u
u
s
s
This page displays all the available DDNS profiles.
Each item will be explained as follows:
Item Description
Auto Refresh
Specify the interval of refresh time to obtain the latest status.
The information will update immediately when the Refresh
button is clicked.
Refresh
Renew current web page.
Profile
Display the name of the DDNS.
Status
Display the connection status of the DDNS server.
Domain Name
Display the domain name for the DDNS server.
Vigor2960 Series User’s Guide
288
4
4
.
.
8
8
.
.
1
1
.
.
2
2
S
S
e
e
t
t
t
t
i
i
n
n
g
g
This page allows you to configure DDNS server for your request.
Each item will be explained as follows:
Item Description
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
rule.
Force Update
Force the router updates its information to DDNS server
immediately.
Refresh
Renew current web page.
Profile
Display the name of the profile.
Enable
Display the status of the profile. False means disabled; True
means enabled.
WAN Profile
Display current WAN profile used by such DDNS profile.
Routing Policy
Display the routing policy used for such DDNS profile.
Service Provider
Display the name of service provider used by such profile.
Service Type
Display the type for such profile.
Domain Name
Display the domain name of such profile.
IP Source
Display the interface (My WAN IP or My Internet IP)
selected by such DDNS profile.
Force update interval
Display the interval setting to refresh the data for such
profile.
H
H
o
o
w
w
t
t
o
o
e
e
d
d
i
i
t
t
a
a
n
n
e
e
x
x
i
i
s
s
t
t
i
i
n
n
g
g
D
D
D
D
N
N
S
S
P
P
r
r
o
o
f
f
i
i
l
l
e
e
There are 10 sets of DDNS server offered for you to modify and configure. Please choose
any one of them and click Edit to open the following page for modification.
Vigor2960 Series User’s Guide
289
1. Open Applications>>Dynamic DNS and click the Setting tab.
2. Choose one of the DDNS profiles and click the Edit button
Available parameters are listed as follows:
Item Description
Profile
Display the name of the profile.
Enable
Check this box to enable such profile.
WAN Profile
Choose a WAN profile that such profile will apply to.
Routing Policy
Choose a routing policy applied to the DDNS profile.
selected wan first – The DDNS profile will be applied to the
traffic via WAN interface first, then applied to other
interface.
selected wan only – The DDNS profile will be applied to
the traffic via WAN interface only. No other interface will
be used.
Service Provider
Select the service provider for the DDNS account.
Vigor2960 Series User’s Guide
290
Service Type
Select a service type (Dynamic, Custom or Static). If you
choose Custom, you can modify the domain that is chosen in
the Domain Name field.
Domain Name
Type in one domain name that you applied previously. Use
the drop down list to choose the desired domain.
User Login Name
Type in the login name that you set for applying domain.
Password
Type in the password that you set for applying domain.
IP Source
Choose My WAN IP or My Internet IP as the source for the
DDNS profile.
Wildcard and
Backup MX
The Wildcard and Backup MX features are not supported for
all Dynamic DNS providers. You could get more detailed
information from their websites.
Mail Extender
Type the IP/Domain name of the mail server.
Force update
interval
Set the time for the router to perform auto update for DDNS
service.
Clear
Click it to restore the default settings for such profile.
Force Update
Click it to force update the profile.
Apply
Click it to save the configuration.
Cancel
Click it to exit the dialog without saving the configuration.
3. Enter all of the settings and click Apply.
4. The DDNS Profile has been modified.
Vigor2960 Series User’s Guide
291
4
4
.
.
8
8
.
.
1
1
.
.
3
3
D
D
D
D
N
N
S
S
L
L
o
o
g
g
This page displays the information related to all DDNS.
4
4
.
.
8
8
.
.
1
1
.
.
4
4
D
D
r
r
a
a
y
y
D
D
D
D
N
N
S
S
L
L
i
i
c
c
e
e
n
n
s
s
e
e
Such page displays license information for DrayDDNS service.
Vigor2960 Series User’s Guide
292
4
4
.
.
8
8
.
.
2
2
D
D
N
N
S
S
S
S
e
e
c
c
u
u
r
r
i
i
t
t
y
y
DNS security is able to ensure that the incoming data is not falsified and the source of the
data is secure and correct to prevent from DNS attack by someone.
Available parameters are listed as follows:
Item Description
Enable DNS Security
Check the box to enable the DNS security management.
Check DNS Reply
Strictly
In default, Vigor router does not check that unsigned DNS
replies are legal or not: they are assumed to be valid and
passed on. This does not protect against an attacker forging
unsigned replies for signed DNS zones, but it is fast. If this
option is enabled, Vigor router will check the zones of
unsigned replies to ensure that unsigned replies are allowed
in those zones. The cost of this is more upstream queries and
slower performance.
Enable – It will check if the unsigned DNS replies are
unsigned or not.
Disable – The unsigned DNS replies will be regarded as
“legal”. It is default setting.
DNS Server check for
DNS Security
Vigor router will check and display if the DNS servers listed
in WAN profiles supporting DNS security or not.
Apply
Click it to save the configuration.
Cancel
Click it to discard the settings configured in this page.
Vigor2960 Series User’s Guide
293
4
4
.
.
8
8
.
.
3
3
G
G
V
V
R
R
P
P
This function can define the method for the changing the VLAN information among devices.
With supporting GVRP, the device can receive the VLAN information coming from other
devices.
Available parameters are listed as follows:
Item Description
Enable This Profile
Check this box to enable GVRP function.
Interface
Choose LAN and/or WAN profiles.
To clear the selected one, click
to remove current object
selections.
Join Time
Define the time for the system to send GVRP packet to other
device. The unit is second.
Apply
Click it to save the configuration.
Cancel
Click it to discard the settings configured in this page.
Vigor2960 Series User’s Guide
294
4
4
.
.
8
8
.
.
4
4
I
I
G
G
M
M
P
P
P
P
r
r
o
o
x
x
y
y
IGMP is the abbreviation of Internet Group Management Protocol. It is a communication
protocol which is mainly used for managing the membership of Internet Protocol multicast
groups.
Available parameters are listed as follows:
Item Description
Enable
Check this box to enable IGMP proxy function.
IGMP Proxy Channel
The application of multicast will be executed through WAN
port. In addition, such function is available in NAT mode.
Downstream
Use the drop down list to specify the LAN profile as the
destination of data coming from WAN interface (defined in
IGMP Proxy Channel).
Add PPP header
Enable – For PPPoE WAN connection, the IGMP packets
will be sent with PPP header and WAN IP address.
Disable – For PPPoE WAN connection, the IGMP packets
will be sent without PPP header. IGMP interface IP will be
used as source IP address.
IGMP Interface IP – Type the IP address of IGMP
server.
Apply
Click it to save the configuration.
Cancel
Click it to discard the settings configured in this page.
Vigor2960 Series User’s Guide
295
4
4
.
.
8
8
.
.
5
5
U
U
P
P
n
n
P
P
The UPnP (Universal Plug and Play) protocol is supported to bring to network connected
devices the ease of installation and configuration which is already available for directly
connected PC peripherals with the existing Windows 'Plug and Play' system. For NAT
routers, the major feature of UPnP on the router is “NAT Traversal”. This enables
applications inside the firewall to automatically open the ports that they need to pass through
a router. It is more reliable than requiring a router to work out by itself which ports need to
be opened. Further, the user does not have to manually set up port mappings or a DMZ.
UPnP is available on Windows XP and the router provide the associated support for MSN
Messenger to allow full use of the voice, video and messaging features.
Available parameters are listed as follows:
Item Description
Enable
Check this box to enable UPnP function.
Download
Enter the maximum sustained WAN download speed in
kilobits/second. Such information can be requested by UPnP
clients.
Upload
Enter the maximum sustained WAN upload speed in
kilobits/second. Such information can be requested by UPnP
clients.
External Interface
Select a WAN profile for UPnP protocol.
Internal Interface
Select a LAN profile for UPnP protocol.
Max Session
Determine the maximum session number for UPnP function.
Apply
Click it to save the configuration.
Cancel
Click it to discard the settings configured in this page.
The reminder as regards concern about Firewall and UPnP
Can't work with Firewall Software
Vigor2960 Series User’s Guide
296
Enabling firewall applications on your PC may cause the UPnP function not working
properly. This is because these applications will block the accessing ability of some
network ports.
Security Considerations
Activating the UPnP function on your network may incur some security threats. You
should consider carefully these risks before activating the UPnP function.
Some Microsoft operating systems have found out the UPnP weaknesses and hence
you need to ensure that you have applied the latest service packs and patches.
Non-privileged users can control some router functions, including removing and
adding port mappings.
The UPnP function dynamically adds port mappings on behalf of some UPnP-aware
applications. When the applications terminate abnormally, these mappings may not be
removed.
4
4
.
.
8
8
.
.
6
6
H
H
i
i
g
g
h
h
A
A
v
v
a
a
i
i
l
l
a
a
b
b
i
i
l
l
i
i
t
t
y
y
The High Availability (HA) feature refers to the awareness of component failure and the
availability of backup resources. The complexity of HA is determined by the availability
needs and the tolerance of system interruptions. Systems, provide nearly full-time
availability, typically have redundant hardware and software that make the system available
despite failures.
The high availability of the Vigor2960 Series is designed to avoid single points-of-failure.
When failures occur, the failover process moves processing performed by the failed
component (the “Master”) to the backup component (the “Slave”). This process remains
system-wide resources, recovers partial of failed transactions, and restores the system to
normal within a matter of microseconds.
Take the following picture as an example. The upper Vigor2960 is regarded as Master
(Active) device, the lower Vigor2960 is regarded as Slave (standby) device. When Master
Vigor2960 Series is broken down, the Slave device could replace the Master role to take
over all jobs as soon as possible. However, once the original Master is working again, the
Slave would be changed to original role to stand by.
Vigor2960 Series User’s Guide
297
4
4
.
.
8
8
.
.
6
6
.
.
1
1
H
H
i
i
g
g
h
h
A
A
v
v
a
a
i
i
l
l
a
a
b
b
i
i
l
l
i
i
t
t
y
y
G
G
l
l
o
o
b
b
a
a
l
l
S
S
e
e
t
t
u
u
p
p
Available parameters are listed as follows:
Item Description
Enable High
Availability
Check this box to enable HA function.
Redundant Method
Choose Hot-Standby or Active-Standby as the method for HA.
Hot-Standby – Hot-Standby is a redundant method of having
several secondary service nodes running standby with another
identical primary service node. Upon failure of the primary
node, the system immediately elects one from all secondary
nodes to replace the failure one and take over the service.
While in the standby status, the secondary nodes are still
mirrored the configuration of primary in real time, thus the
whole systems are assured of having identical configuration.
Active-Standby –Active-Standby is a redundant method of
having the access points configured independently by
participating in HA session with individual LAN interface. As
an active gateway LAN, it routes user’s traffic while others stay
in standby status.
Settings under
Hot-Standby
Authentication Key – Type a string as the authentication key.
It is used for encrypting the HA session communication to
prevent malicious attack.
Advance Preemption Mode –
Specify a mode for changing
the Config Synchronization Role.
Immediate – The router will be restored to primary
(master) router once the service is restored.
Delayed – The router must wait for a period of time to
restore to primary (master) router when the service is
Vigor2960 Series User’s Guide
298
restored.
Delayed Interval: Specify the time for waiting.
Manual – Restoring must be done according to the setting
of Manual Preemption Status.
Manual Preemption Status – Click Active or Inactive.
Manual Mode Threshold – Set a period of time for the
system to determine the master router when there is no
master router detected.
If the router is set as Master router, and you change the Manual
Preemption Status from Active to Inactive. Once the router
detects that it is in Inactive state, it will not take preemption.
However, if there is no secondary router taking over the
service, all the data traffic would be terminated.
To solve the problem, two methods can be executed:
1. Simply reset Manual Preemption Status from Inactive to
Active and then click Apply to save the settings.
2. Set the value for Manual Mode Threshold. After passing the
time configured in Manual Mode Threshold, if the system
detects no master router existing, then Manual Preemption
Status will be reset to Active to locate the master router.
WAN Connection Status Detection –Click Enable to make
the router detecting WAN connection status. It is similar to
"LAN Port Detection Mode" but will detect connection status
of all enabled WAN profiles. If connection status of all enabled
WAN profiles are down, the master router hands off its
position.
LAN Port Detection Mode – The router (with the role of
Primary - Master) will detect if there is malfunction on LANs
automatically. This function will force the master router to
failover to other backups if any failure of LAN is detected.
There are two schemes to determine the failure of LAN ports:
At Least One Up - The master router can own its position
only if one LAN port is connecting.
All Must Be Up - The master router can own its position
only when all of LAN ports are connecting.
Settings under
Active-Standby
Authentication Key – Type a string as the authentication key.
It is used for encrypting the HA session communication to
prevent malicious attack.
WAN Connection Status Detection – Click Enable to make
the router detecting WAN connection status. It is similar to
"LAN Port Detection Mode" but will detect connection status
of all enabled WAN profiles. If connection status of all enabled
WAN profiles are down, the master router hands off its
position.
Vigor2960 Series User’s Guide
299
4
4
.
.
8
8
.
.
6
6
.
.
2
2
H
H
o
o
t
t
-
-
S
S
t
t
a
a
n
n
d
d
b
b
y
y
P
P
r
r
o
o
f
f
i
i
l
l
e
e
S
S
e
e
t
t
u
u
p
p
The Hot-Standby mechanism is that the router with highest priority to be Master device. And
other lower priority router will be a backup device for the highest router.
When the Master device fails, one of the backup devices will be chosen by priority as the
Master device to offer the network service for the connected PCs.
Available parameters are listed as follows:
Item Description
HA LAN Profile
Choose one of the LAN profiles for communication in HA
application.
Priority ID
“1” has the highest priority. For example, Vigor router with the
priority of “1” shall play the role of Master device.
Virtual IP for
Gateway
Assign an IP address as a virtual IP.
Group ID
Type a value as Group ID for identification in HA application.
All of the routers under a certain HA application must be
configured with the same group ID. Different HA applications
shall have different group ID.
HA Status
It will display the HA status (Master or Backup) for such
router.
Apply
Click it to save the configuration.
Cancel
Click it to discard the settings configured in this page.
Vigor2960 Series User’s Guide
300
4
4
.
.
8
8
.
.
6
6
.
.
3
3
A
A
c
c
t
t
i
i
v
v
e
e
-
-
S
S
t
t
a
a
n
n
d
d
b
b
y
y
M
M
e
e
c
c
h
h
a
a
n
n
i
i
s
s
m
m
The active-standby Mechanism is that each access point in LAN will participate in different
high availability sessions. All the WAN interfaces can be active which provide more flexible
utilization of network service.
When LAN1 in Router A fails, one of the available line connections (e.g., LAN1 in Router C)
will be selected to offer the network service for all the connected PCs.
Vigor2960 Series User’s Guide
301
The following page is used to create Active-Standby profiles.
Available parameters are listed as follows:
Item Description
Add
Add a new HA profile.
Edit
Modify the selected HA profile.
To edit the profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for you
to modify the corresponding settings for the selected profile.
Delete
Remove the selected HA profile.
To delete a profile, simply select the one you want to delete and
click the Delete button.
Auto Refresh
Specify the interval of refresh time to obtain the latest status.
The information will update immediately when the Refresh
button is clicked.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (4) of the object profiles to be created.
Profile
Display the name of the HA profile.
HA LAN Profile
Display the LAN profile used by such HA.
Virtual IP for
Gateway
Display the IP address of the gateway.
VHID
Display the virtual host ID number of the profile.
Role
Display the role of this profile in the corresponding HA group.
HA Status
Display the online status (Master, Backup, LAN_failed and
WAN_Failed) of such HA profile.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
A
A
c
c
t
t
i
i
v
v
e
e
-
-
S
S
t
t
a
a
n
n
d
d
b
b
y
y
P
P
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Applications>>High Availability and click the Active-Standby Profile Setup
tab.
Vigor2960 Series User’s Guide
302
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type a name for such profile.
HA LAN Profile
Choose one of the LAN profiles that such function will be
applied to.
Virtual IP for
Gateway
Assign an IP address as a virtual IP.
VHID
It means Virtual Host ID. Type a number as VHID for such
function. VHID is used for Backup router to identify which
Master will be backed up.
Role
LAN profiles configured for HA application can run
independently and will not interfere with each other.
Therefore, LAN1 (Backup) of router A can be the backup of
LAN1 (Master) of router B; LAN2 (Backup) of router B can
the backup of LAN2 of router A(Master).
Each HA LAN profile (configured under the same router) must
be specified a role as Master or Backup.
HA Status
Display the online status (Master, Backup, LAN_failed and
WAN_Failed) of such HA profile.
Apply
Click it to save the configuration.
Cancel
Click it to discard the settings configured in this page.
4. Enter all of the settings and click Apply.
Vigor2960 Series User’s Guide
303
4
4
.
.
8
8
.
.
6
6
.
.
4
4
H
H
A
A
S
S
t
t
a
a
t
t
u
u
s
s
This page displays status information of High Availability.
Each item is explained as follows:
Item Description
Auto Refresh
Specify the interval of refresh time to obtain the latest status.
The information will update immediately when the Refresh
button is clicked.
Refresh
Renew current web page.
Group ID
Display the group ID number of such router.
Priority ID
Display the number which represents the priority of Vigor
router in HA application. The less the number is; the higher the
priority shall be. The router with the highest priority will be
treated as the Master device in HA application.
IP
Display the IP address of Vigor router.
Router Name
Display the name of Vigor router.
Redundant Method
Display the method (Hot-Standby or Active-Standby) used for
HA.
HA Status
Display the online status (Master, Backup, LAN_failed and
WAN_Failed) of such HA profile.
Vigor2960 Series User’s Guide
304
Detail
An icon displayed here allows to open a detailed settings page
for HA configuration.
Vigor2960 Series User’s Guide
305
4
4
.
.
8
8
.
.
7
7
W
W
a
a
k
k
e
e
o
o
n
n
L
L
A
A
N
N
A PC client on LAN can be woken up by the router it connects. When a user wants to wake
up a specified PC through the router, he/she must type correct MAC address of the specified
PC on this web page of Wake on LAN of this router.
In addition, such PC must have installed a network card supporting WOL function. By the
way, WOL function must be set as “Enable” on the BIOS setting.
4
4
.
.
8
8
.
.
7
7
.
.
1
1
W
W
a
a
k
k
e
e
o
o
n
n
L
L
A
A
N
N
Available parameters are listed as follows:
Item Description
Configure Bind IP to
MAC
Click it to open the setting page of Bind IP to MAC.
Wake by
Three types provide for you to wake up the bound IP. If you
choose Wake by MAC Address, you have to type the correct
MAC address of the host in MAC Address boxes. If you
choose Wake by IP Address, you have to choose the correct
IP address.
Profile Name – Choose a profile (created by LAN>>Bind
IP to MAC) from the drop down list.
IP Address - The IP addresses that have been configured in
Firewall>>Bind IP to MAC will be shown in this drop
down list. Choose the IP address from the drop down list that
you want to wake up.
MAC Address - Type any one of the MAC address of the
bind PCs.
LAN Profile – Use the drop down list to choose one of the
LAN profiles.
Wake Up
Click this button to wake up the selected IP. See the
following figure. The result will be shown on the box.
Delete
Click this button to remove the result.
Vigor2960 Series User’s Guide
306
4
4
.
.
8
8
.
.
7
7
.
.
2
2
S
S
c
c
h
h
e
e
d
d
u
u
l
l
e
e
W
W
a
a
k
k
e
e
o
o
n
n
L
L
A
A
N
N
This page is used to set profiles which will perform WOL based on the conditions specified
by Bind Table profile, MAC address, LAN profile and time profile.
Available parameters are listed as follows:
Item Description
Add
Add a new schedule profile.
Edit
Modify the selected schedule profile.
To edit the profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
profile.
Delete
Remove the selected schedule profile.
To delete a profile, simply select the one you want to delete
and click the Delete button.
Refresh
Renew current web page.
Profile
Display the name of the profile.
Enable
Display the status of profile (true means Enable/ false means
Disable).
Bind Table
Display the profile name from Bind Table.
MAC Address
Display the MAC address of the computer to be woke on
LAN.
Time Object
Display the name of the time object selected for WOL.
LAN Profile
Display the name of LAN profile.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
s
s
c
c
h
h
e
e
d
d
u
u
l
l
e
e
p
p
r
r
o
o
f
f
i
i
l
l
e
e
f
f
o
o
r
r
W
W
O
O
L
L
1. Open Applications>>Wake on LAN and click the Schedule Wake on LAN tab.
2. Simply click the Add button.
3. The following dialog will appear.
Vigor2960 Series User’s Guide
307
Available parameters are listed as follows:
Item Description
Profile
Type a name for such profile.
Enable
Check the box to enable such profile.
Mode
Choose the type for data input, Bind Table or MAC Address.
Bind Table
Choose one of the profiles listed in Bind Table.
MAC Address
If MAC Address is selected as Mode, you have to type MAC
address in this field. Then only the PC with such address will
be waken up remotely.
Time Object
Choose time object profile for waking up the computer in
specified time. Time object profiles can be configured in
Object Settings>>Time Object previously.
LAN Profile
Choose one of the LAN profiles. The computers specified in
the selected LAN profile will be waken up remotely.
Apply
Click it to save the configuration and exit the page.
Cancel
Click it to exit the dialog without saving the configuration.
4. Enter all of the settings and click Apply.
Vigor2960 Series User’s Guide
308
4
4
.
.
8
8
.
.
8
8
S
S
M
M
S
S
/
/
M
M
a
a
i
i
l
l
A
A
l
l
e
e
r
r
t
t
S
S
e
e
r
r
v
v
i
i
c
c
e
e
The function of SMS (Short Message Service)/Mail Alert is that Vigor router sends a
message to user’s mobile or e-mail box through specified service provider to assist the user
knowing the real-time abnormal situations.
Vigor router allows you to set up to 10 SMS profiles which will be sent out according to
different conditions.
4
4
.
.
8
8
.
.
8
8
.
.
1
1
S
S
M
M
S
S
A
A
l
l
e
e
r
r
t
t
S
S
e
e
r
r
v
v
i
i
c
c
e
e
This page allows you to specify SMS provider, who will get the SMS, what the content is
and when the SMS will be sent.
Each item will be explained as follows:
Item Description
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
profile.
Refresh
Renew current web page.
Index
Display the index number (from 1 to 10) of the profile.
Enable
Display the status of the profile. False means disabled; True
means enabled.
SMS Provider
Display the name of the SMS provider.
Recipient
Display the one who will receive the SMS.
Notify Profile
Display the name of the notify profile.
Vigor2960 Series User’s Guide
309
H
H
o
o
w
w
t
t
o
o
e
e
d
d
i
i
t
t
t
t
h
h
e
e
S
S
M
M
S
S
a
a
l
l
e
e
r
r
t
t
s
s
e
e
r
r
v
v
i
i
c
c
e
e
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Applications>> SMS/Mail Alert Service and click the SMS Alert Service tab.
2. Choose one of the index numbers and click the Edit button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Enable
Check this box to enable such profile.
SMS Provider
Choose the SMS provider object profile from the drop down
list.
Such profiles can be created from Object Setting>>SMS
Service Object.
Recipient
Type the cell phone number to receive the SMS.
Notify Profile
Choose a profile (specify the timing for sending SMS) from
the drop down list.
Such profiles can be created from Object
Setting>>Notification Object.
Apply
Click it to save the configuration and exit the page.
Cancel
Click it to exit the dialog without saving the configuration.
4. Enter all of the settings and click Apply.
5. The SMS alert service profile has been modified.
Vigor2960 Series User’s Guide
310
4
4
.
.
8
8
.
.
8
8
.
.
2
2
M
M
a
a
i
i
l
l
A
A
l
l
e
e
r
r
t
t
S
S
e
e
r
r
v
v
i
i
c
c
e
e
This page allows you to specify Mail Server profile, who will get the notification e-mail,
what the content is and when the message will be sent.
Each item will be explained as follows:
Item Description
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
profile.
Refresh
Renew current web page.
Index
Display the index number (from 1 to 10) of the profile.
Enable This Profile
Display the status of the profile. False means disabled; True
means enabled.
Mail Profile
Display the name of the mail profile.
Recipient
Display the one who will receive the mail alert.
Notify Profile
Display the name of the notify profile.
H
H
o
o
w
w
t
t
o
o
e
e
d
d
i
i
t
t
t
t
h
h
e
e
m
m
a
a
i
i
l
l
a
a
l
l
e
e
r
r
t
t
s
s
e
e
r
r
v
v
i
i
c
c
e
e
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Applications>> SMS/Mail Alert Service and click the Mail Alert Service tab.
2. Choose one of the index numbers and click the Edit button.
3. The following dialog will appear.
Vigor2960 Series User’s Guide
311
Available parameters are listed as follows:
Item Description
Enable This Profile
Check this box to enable such profile.
Mail Profile
Choose the mail service object profile from the drop down
list.
Such profiles can be created from Object Setting>>Mail
Service Object.
Recipient
Type the e-mail address for receiving the mail.
Notify Profile
Choose a profile (specify the timing for sending SMS) from
the drop down list.
Such profiles can be created from Object
Setting>>Notification Object.
Send A Test Mail
Click it to send a test mail.
Apply
Click it to save the configuration and exit the page.
Cancel
Click it to exit the dialog without saving the configuration.
4. Enter all of the settings and click Apply.
5. The mail alert service profile has been modified.
Vigor2960 Series User’s Guide
312
4
4
.
.
9
9
V
V
P
P
N
N
a
a
n
n
d
d
R
R
e
e
m
m
o
o
t
t
e
e
A
A
c
c
c
c
e
e
s
s
s
s
A Virtual Private Network (VPN) is the extension of a private network that encompasses
links across shared or public networks like the Internet. In short, by VPN technology, you
can send data between two computers across a shared or public network in a manner that
emulates the properties of a point-to-point private link.
Below shows the menu items for VPN and Remote Access.
4
4
.
.
9
9
.
.
1
1
V
V
P
P
N
N
C
C
l
l
i
i
e
e
n
n
t
t
W
W
i
i
z
z
a
a
r
r
d
d
Such wizard is used to configure VPN settings for VPN client. Such wizard will guide to set
the LAN-to-LAN profile for VPN dial out connection (from server to client) step by step.
Vigor2960 Series User’s Guide
313
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
L
L
A
A
N
N
-
-
t
t
o
o
-
-
L
L
A
A
N
N
p
p
r
r
o
o
f
f
i
i
l
l
e
e
f
f
o
o
r
r
V
V
P
P
N
N
c
c
l
l
i
i
e
e
n
n
t
t
(
(
d
d
i
i
a
a
l
l
-
-
o
o
u
u
t
t
)
)
1. Open VPN and Remote Access >> VPN Client Wizard.
2. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Type
Specify which protocol (PPTP/IPsec/SSL) will be used for
such VPN profile.
VPN Settings Via
Select From Current Settings - Current VPN LAN to LAN
profiles will be listed below such setting. Choose the one
you need.
Create New VPN Profile – It allows you to create a new
VPN LAN to LAN profile. Simply type the name in the field
of Profile Name. The field of Profile Name is available only
when you click this setting.
Vigor2960 Series User’s Guide
314
3. Specify the type. Click Create New VPN Profile and type the name of the profile.
Then, click Next.
4. If you choose PPTP as the Type, you will get the following screen:
Available parameters are listed as follows:
Item Description
Profile
Display the name of the VPN profile.
Enable
Check this box to enable such profile.
Always On
Click Enable to make the profile being always on.
Vigor2960 Series User’s Guide
315
Dial-Out Through
Choose a wan profile to be used by such profile. Then, use
the default WAN IP or specify a WAN Alias IP for VPN
tunnel.
Failover to
Choose a wan profile which will lead the data passing
through other WAN automatically when the selected WAN
interface (in Dial-Out Through) is failover.
Idle Timeout
When Always On is disabled, you have to type the value for
terminating the network connection.
Server IP/Host
Name
Type the IP address or host name of PPTP server.
PPTP User Name
Type a user name for authentication in PPTP connection.
PPTP Password
Type a password for authentication in PPTP connection.
Local IP/Subnet
Mask
Type the IP address and subnet mask of local host.
Remote IP/Subnet
Mask
Type the LAN IP address and LAN subnet mask for the
remote host.
Route/NAT Mode
Specify the purpose for such profile.
Netbios Naming
Packet
Enable – Click it to have an inquiry for data transmission
between the hosts located on both sides of VPN Tunnel
while connecting.
Disable –When there is conflict occurred between the hosts
on both sides of VPN Tunnel in connecting, such function
can block data transmission of Netbios Naming Packet inside
the tunnel.
Multicast via VPN
Some programs might send multicast packets via VPN
connection.
Enable – Click this button to let multicast packets pass
through the router.
Disable – This is default setting. Click this button to let
multicast packets be blocked by the router.
RIP via VPN
Enable – Click it to exchange routing information
protocol packets via VPN connection.
Disable – Disable such function. This is default setting.
Vigor2960 Series User’s Guide
316
If you choose IPsec as the Type, you will get the following screen:
Available parameters are listed as follows:
Item Description
Profile
Display the name of the VPN profile.
Enable
Check this box to enable such profile.
WAN Profile
Choose a wan profile to be used by such profile.
Local IP/Subnet
Mask
Type the IP address and subnet mask of local host.
Local Next Hop
Specify the gateway for WAN interface. Usually, use the
default setting (leave it in blank).
Remote Host
Type the WAN IP address for the remote host.
Remote IP / Subnet
Mask
Type the LAN IP address and LAN subnet mask for the
remote host.
More Remote
Subnet
Add more remote subnet in this field if required.
IKE Phase 1
The ultimate outcome is to exchange security proposals to
create a protected secure channel. Main mode is more secure
than Aggressive mode since more exchanges are done in a
secure channel to set up the IPSec session. However, the
Aggressive mode is faster. The default value in Vigor router
is Main mode.
Local ID – Type the ID for Vigor router which can be
configured by the remote end. It is available only when
Aggressive Mode is enabled.
Remote ID – It is on behalf of the IP address while identity
authentication with remote VPN server. The length of ID is
limited to 47 characters. It is available only when Aggressive
Vigor2960 Series User’s Guide
317
Mode is enabled.
Auth Type
The authentication to be used by Pre-Shared Key or RSA
Signature. Choose PSK or RSA for such profile.
Preshared Key
Type a pre-shared key for authentication if PSK is selected
as Auth Type.
Security Protocol
Choose ESP to specify the IPsec protocol for the
Encapsulating Security Payload protocol. The data will be
encrypted and authenticated. Choose AH to specify the IPsec
protocol for the Authentication Header protocol. The data
will be authenticated but not be encrypted.
DPD Delay
DPD means dead peer detection. It is a keep-alive timer. A
Hello message will be emitted periodically when a tunnel is
idle. Use the value 0 to disable this function. The
recommended value is 30 seconds if enabled.
DPD Timeout
It is the timeout timer. The peer will be declared dead once
no acknowledge message is received after timeout value.
Use the value 0 to disable this function. The recommended
value is 120 seconds if enabled.
If you choose SSL as the Type, you will get the following screen:
Available parameters are listed as follows:
Item Description
Profile
Display the name of the VPN profile.
Enable
Check this box to enable such profile.
Always On
Click Enable to make the profile being always on.
Dial-Out Through
Choose a wan profile to be used by such profile. Then, use
the default WAN IP or specify a WAN Alias IP for VPN
Vigor2960 Series User’s Guide
318
tunnel.
Failover to
Choose a wan profile which will lead the data passing
through other WAN automatically when the selected WAN
interface (in Dial-Out Through) is failover.
Idle Timeout
When Always On is disabled, you have to type the value for
terminating the network connection.
Server IP/Host
Name
Type the IP address or host name of SSL VPN server.
SSL User Name
Type a user name for authentication in SSL VPN connection.
SSL Password
Type a password for authentication in SSL VPN connection.
Local IP/Subnet
Mask
Type the IP address and subnet mask of local host.
Remote IP/Subnet
Mask
Type the LAN IP address and LAN subnet mask for the
remote host.
Route/NAT Mode
Specify the purpose for such profile.
Netbios Naming
Packet
Enable – Click it to have an inquiry for data transmission
between the hosts located on both sides of VPN Tunnel
while connecting.
Disable –When there is conflict occurred between the hosts
on both sides of VPN Tunnel in connecting, such function
can block data transmission of Netbios Naming Packet inside
the tunnel.
Multicast via VPN
Some programs might send multicast packets via VPN
connection.
Enable – Click this button to let multicast packets pass
through the router.
Disable – This is default setting. Click this button to let
multicast packets be blocked by the router.
RIP via VPN
Enable – Click it to exchange routing information
packets via VPN connection.
Disable – Disable such function.
5. Fill in the required information on this page and click Finish. Later, a new profile has
been created.
Vigor2960 Series User’s Guide
319
Vigor2960 Series User’s Guide
320
4
4
.
.
9
9
.
.
2
2
V
V
P
P
N
N
S
S
e
e
r
r
v
v
e
e
r
r
W
W
i
i
z
z
a
a
r
r
d
d
Such wizard is used to configure VPN settings for VPN server. Such wizard will guide to set
the LAN-to-LAN profile for VPN dial in connection (from client to server) step by step.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
L
L
A
A
N
N
-
-
t
t
o
o
-
-
L
L
A
A
N
N
p
p
r
r
o
o
f
f
i
i
l
l
e
e
f
f
o
o
r
r
V
V
P
P
N
N
s
s
e
e
r
r
v
v
e
e
r
r
1. Open VPN and Remote Access >> VPN Server Wizard.
2. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Type
Specify which protocol (PPTP/IPsec/SSL) will be used for
such VPN profile.
Vigor2960 Series User’s Guide
321
VPN Settings Via
Select From Current Settings - Current VPN LAN to LAN
profiles will be listed below such setting. Choose the one
you need.
Create New VPN Profile – It allows you to create a new
VPN LAN to LAN profile. Simply type the name in the field
of Profile Name. The field of Profile Name is available only
when you click this setting.
Profile Name
Type a new name for such profile.
Next
Go to next page.
Cancel
Cancel the configuration and return to the home page of such
function.
3. Click Create New VPN Profile and type the name of the profile. Click Next to get into
next page. Note that if you choose PPTP as the Type in Step 2, you will see the page
as below:
Item Description
Profile
Display the name of the profile.
Enable
Check this box to enable such profile.
PPTP User Name
Choose a user for authentication in PPTP connection.
Such profile shall be created in User Management>>User
Profile previously. Otherwise, there are no selections
displayed here.
Local IP / Subnet
Mask
Type the IP address and subnet mask of local host.
Remote IP / Subnet
Mask
Type the LAN IP address and LAN subnet mask for the
remote host.
Vigor2960 Series User’s Guide
322
Netbios Naming
Packet
Enable – Click it to have an inquiry for data transmission
between the hosts located on both sides of VPN Tunnel
while connecting.
Disable –When there is conflict occurred between the hosts
on both sides of VPN Tunnel in connecting, such function
can block data transmission of Netbios Naming Packet inside
the tunnel.
Multicast via VPN
Some programs might send multicast packets via VPN
connection.
Enable – Click this button to let multicast packets pass
through the router.
Disable – This is default setting. Click this button to let
multicast packets be blocked by the router.
RIP via VPN
Enable – Click it to exchange routing information
packets via VPN connection.
Disable – Disable such function. This is default setting.
If you choose IPsec as the Type in Step 1, you will get the following page:
Available parameters are listed as follows:
Item Description
Profile
Display the name of the VPN profile.
Enable
Check this box to enable such profile.
WAN Profile
Choose a WAN profile to be used by such profile.
Local IP/Subnet
Mask
Type the IP address and subnet mask of local host.
Local Next Hop
Specify the gateway for WAN interface. Usually, use the
default setting (leave it in blank).
Remote Host
Type the WAN IP address for the remote host.
Vigor2960 Series User’s Guide
323
Remote IP / Subnet
Mask
Type the LAN IP address and LAN subnet mask for the
remote host.
More Remote
Subnet
Add more remote subnet in this field if required.
IKE Phase 1
The ultimate outcome is to exchange security proposals to
create a protected secure channel. Main mode is more secure
than Aggressive mode since more exchanges are done in a
secure channel to set up the IPSec session. However, the
Aggressive mode is faster. The default value in Vigor router
is Main mode.
Local ID – Type the ID for Vigor router which can be
configured by the remote end. It is available only when
Aggressive Mode is enabled.
Remote ID – It is on behalf of the IP address while identity
authentication with remote VPN server. The length of ID is
limited to 47 characters. It is available only when Aggressive
Mode is enabled.
Auth Type
The authentication to be used by Pre-Shared Key or RSA
Signature. Choose PSK or RSA for such profile.
Preshared Key
Type a pre-shared key for authentication if PSK is selected
as Auth Type.
Security Protocol
Choose ESP to specify the IPsec protocol for the
Encapsulating Security Payload protocol. The data will be
encrypted and authenticated. Choose AH to specify the IPsec
protocol for the Authentication Header protocol. The data
will be authenticated but not be encrypted.
DPD Delay
DPD means dead peer detection. It is a keep-alive timer. A
Hello message will be emitted periodically when a tunnel is
idle. Use the value 0 to disable this function. The
recommended value is 30 seconds if enabled.
DPD Timeout
It is the timeout timer. The peer will be declared dead once
no acknowledge message is received after timeout value.
Use the value 0 to disable this function. The recommended
value is 120 seconds if enabled.
Vigor2960 Series User’s Guide
324
If you choose SSL as the Type in Step 1, you will get the following page:
Item Description
Profile
Display the name of the profile.
Enable
Check this box to enable such profile.
SSL User Name
Choose a user for authentication in SSL connection.
Such profile shall be created in User Management>>User
Profile previously. Otherwise, there are no selections
displayed here.
Local IP / Subnet
Mask
Type the IP address and subnet mask of local host.
Remote IP / Subnet
Mask
Type the LAN IP address and LAN subnet mask for the
remote host.
Netbios Naming
Packet
Enable – Click it to have an inquiry for data transmission
between the hosts located on both sides of VPN Tunnel
while connecting.
Disable –When there is conflict occurred between the hosts
on both sides of VPN Tunnel in connecting, such function
can block data transmission of Netbios Naming Packet inside
the tunnel.
Multicast via VPN
Some programs might send multicast packets via VPN
connection.
Enable – Click this button to let multicast packets pass
through the router.
Disable – This is default setting. Click this button to let
multicast packets be blocked by the router.
RIP via VPN
Enable – Click it to exchange routing information
Vigor2960 Series User’s Guide
325
packets via VPN connection.
Disable – Disable such function. It is default setting.
4. Fill in the required information on this page and click Finish. A pop-up window will
appear.
5. Click OK. Then, return to VPN and Remote Access>>VPN Server Wizard. The new
added VPN server profile will be displayed on the screen.
Vigor2960 Series User’s Guide
326
4
4
.
.
9
9
.
.
3
3
R
R
e
e
m
m
o
o
t
t
e
e
A
A
c
c
c
c
e
e
s
s
s
s
C
C
o
o
n
n
t
t
r
r
o
o
l
l
Enable the necessary VPN service as you need. If you intend to run a VPN server inside your
LAN, you should disable the VPN service (e.g., PPTP VPN, L2TP VPN, SSL VPN,
OpenVPN, IPsec etc.) of Vigor Router to allow VPN tunnel pass through.
Available parameters are listed as follows:
Item Description
Enable PPTP/L2TP
VPN Service / SSL
Tunnel / OpenVPN /
IPsec Service
Check the box(es) to enable the service.
IPsec Remote Dial-In
Service
Choose one of the services by clicking on the radio button.
Apply
Click it to save the configuration.
Cancel
Click it to discard the settings configured in this page.
Vigor2960 Series User’s Guide
327
4
4
.
.
9
9
.
.
4
4
P
P
P
P
P
P
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
Remote users can connect to the site, host, server and etc. via VPN connection built between
the router and the users by authentication procedure.
4
4
.
.
9
9
.
.
4
4
.
.
1
1
P
P
P
P
T
T
P
P
This page display current status for VPN tunnel built with PPTP protocol.
Available parameters are listed as follows:
Item Description
Authenticate Protocol
The router will authenticate the dial-in user with the protocol
selected here.
PAP - It means the router will attempt to authenticate dial-in
users with the PAP protocol.
CHAP - It means the router will attempt to authenticate
dial-in users with the CHAP protocol.
MPPE Encryption
Specify one of the encryptions for such server. It is available
only when MS-CHAP or MS-CHAP_v2 is selected.
User Authentication
Type
Set user authentication to Local, RADIUS or LDAP server.
LDAP profiles
Choose a LDAP profile for PPTP Server if LDAP is selected
Vigor2960 Series User’s Guide
328
as user authentication type.
To clear the selected one, click
to remove current object
selections.
DHCP from
Choose a LAN profile for L2TP Server if RADIUS is
selected as user authentication type.
WAN Profile
Choose an interface (e.g., wan1, usb1) profile.
DHCP Relay
Enable - Let the router assign IP address to every host in the
LAN.
Disable - Let you manually assign IP address to every host
in the LAN.
PPTP MSS
Type the maximum segment size (MSS) for PPTP VPN
tunnel.
NetBIOS Naming
Packet
Pass – Click it to have an inquiry for data transmission
between the hosts located on both sides of VPN Tunnel
while connecting.
Block – When there is conflict occurred between the hosts
on both sides of VPN Tunnel in connecting, such function
can block data transmission of Netbios Naming Packet inside
the tunnel.
Multicast Packet via
VPN
Some programs might send multicast packets via VPN
connection.
Pass – Click this button to let multicast packets pass
through the router.
Block – This is default setting. Click this button to let
multicast packets be blocked by the router.
PPTP Acceleration
Enable – Click it to make PPTP acceleration for VPN.
Apply
Click it to save the configuration.
Cancel
Click it to discard the settings configured in this page.
4
4
.
.
9
9
.
.
4
4
.
.
2
2
L
L
2
2
T
T
P
P
This page display current status for VPN tunnel built with L2TP protocol.
Vigor2960 Series User’s Guide
329
Available parameters are listed as follows:
Item Description
Authenticate Protocol
The router will authenticate the dial-in user with the
protocol selected here.
PAP - It means the router will attempt to authenticate
dial-in users with the PAP protocol.
CHAP - It means the router will attempt to authenticate
dial-in users with the CHAP protocol.
User Authentication
Type
Set user authentication to Local server or RADIUS server.
LDAP profiles
Choose a LDAP profile for L2TP Server if LDAP is
selected as user authentication type.
To clear the selected one, click
to remove current
object selections.
DHCP from
Choose a LAN profile for L2TP Server if RADIUS is
selected as user authentication type.
DHCP Relay
Enable - Let the router assign IP address to every host in
the LAN.
Disable - Let you manually assign IP address to every host
in the LAN.
DHCP Server Location
It is available when DHCP Relay is enabled.
Choose the WAN/LAN interface for the DHCP server.
Vigor2960 Series User’s Guide
330
DHCP Server IP
Address
It is available when DHCP Relay is enabled. Set the IP
address of the DHCP server you are going to use so the
relay agent can help to forward the DHCP request to the
DHCP server.
Force L2TP with IPsec
policy
If it is checked, the router will use L2TP with IPsec policy
for VPN connection.
Apply
Click it to save the configuration.
Cancel
Click it to discard the settings configured in this page.
Enter all of the settings and click Apply.
Vigor2960 Series User’s Guide
331
4
4
.
.
9
9
.
.
4
4
.
.
3
3
S
S
S
S
L
L
V
V
P
P
N
N
This page display current status for VPN tunnel built with SSL protocol.
Available parameters are listed as follows:
Item Description
Authenticate Protocol
The router will authenticate the dial-in user with the protocol
selected here.
PAP - It means the router will attempt to authenticate dial-in
users with the PAP protocol.
CHAP - It means the router will attempt to authenticate
dial-in users with the CHAP protocol.
User Authentication
Type
Set user authentication to Local server, LDAP server or
RADIUS server.
LDAP profiles
Choose a LDAP profile for PPTP Server if LDAP is selected
as user authentication type.
To clear the selected one, click
to remove current object
selections.
DHCP from
Choose a LAN profile for L2TP Server if RADIUS is
selected as user authentication type.
DHCP Relay
Enable - Let the router assign IP address to every host in the
LAN.
Disable - Let you manually assign IP address to every host in
the LAN.
DHCP Server Location
It is available when DHCP Relay is enabled.
Choose the WAN/LAN interface for the DHCP server.
Vigor2960 Series User’s Guide
332
DHCP Server IP
Address
It is available when DHCP Relay is enabled. Set the IP
address of the DHCP server you are going to use so the relay
agent can help to forward the DHCP request to the DHCP
server.
SSL VPN MSS
Type the maximum segment size (MSS) for SSL VPN tunnel.
NetBIOS Naming
Packet
Pass – Click it to have an inquiry for data transmission
between the hosts located on both sides of VPN Tunnel while
connecting.
Block – When there is conflict occurred between the hosts on
both sides of VPN Tunnel in connecting, such function can
block data transmission of Netbios Naming Packet inside the
tunnel.
Multicast Packet via
VPN
Some programs might send multicast packets via VPN
connection.
Pass – Click this button to let multicast packets pass through
the router.
Block – This is default setting. Click this button to let
multicast packets be blocked by the router.
Apply
Click it to save the configuration.
Cancel
Click it to discard the settings configured in this page.
Enter all of the settings and click Apply.
Vigor2960 Series User’s Guide
333
4
4
.
.
9
9
.
.
5
5
O
O
p
p
e
e
n
n
V
V
P
P
N
N
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
In general, both server and client must use routers with the same model to make a successful
VPN. If not, a problem would be caused due to wrong brands of models. Main advantage for
OpenPVN is that it is a mechanism which is easy for users to build safe and reliable virtual
network, even if the brand or model of router used by both ends are totally different.
OpenVPN allows Vigor router to establish an instant VPN connection across the Internet
with any router (e.g., non-Vigor router) by using simple and easy configuration.
With integration of OpenVPN, Vigor2960 can help users to achieve a more robust, reliable
and secure private connections for business needs.
4
4
.
.
9
9
.
.
5
5
.
.
1
1
O
O
p
p
e
e
n
n
V
V
P
P
N
N
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
Before establishing OpenVPN connection, general settings for OpenVPN service shall be
configured first.
Available parameters are listed as follows:
Item Description
Enable
Click it to enable the function of OpenVPN between VPN
client and VPN server.
TCP Mode
Enable – Click it for entering TCP port number.
TCP Port
Enter a number for TCP protocol.
UDP Mode
Enable – Click if for entering UDP port number.
UDP Port
Enter a number for UDP protocol.
Apply
Click it to save the configuration.
Cancel
Click it to discard the settings configured in this page.
4
4
.
.
9
9
.
.
5
5
.
.
2
2
O
O
p
p
e
e
n
n
V
V
P
P
N
N
C
C
l
l
i
i
e
e
n
n
t
t
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
The settings on this page can be downloaded as a file. Later, such file can be imported and
applied to remote end’s CPE (as VPN client). Then, a private connection via OpenVPN
tunnel between the server and the client can be connected successfully.
Vigor2960 Series User’s Guide
334
Available parameters are listed as follows:
Item Description
Remote Host
Specify the type used for remote host.
Default WAN IP – Click it to use default WAN IP of remote
host. You need to choose an interface for such VPN.
Customized – Click it to specify URL for the remote host.
You need to enter the URL content in the field of Host.
Interface
It is available when Default WAN IP is selected as Remote
Host.
Specify a WAN interface (e.g., WAN1/2) for setting up VPN
connection.
If there is any IP alias setting created for the selected WAN
interface, you can choose one of the IP alias for the remote
client to connect to.
Host
It is available when Customized is selected as Remote Host.
Protocol
Simply choose UDP or TCP as protocol for building
OpenVPN connection between the server and the remote
client.
Auto Dial-Out
Enable – Once the OpenVPN tunnel is disconnected, Vigor
router will dial out for rebuilding the VPN automatically.
Disable – When the OpenVPN tunnel is disconnected, Vigor
router will not dial out for rebuilding the VPN automatically.
Set VPN as Default
Gateway
After importing the configuration file to remote CPE’s
device, all the data can be transmitted through the original
gateway or such OpenVPN tunnel.
Enable – All the data traffic will be processed through such
OpenVPN tunnel.
Disable – All the data traffic will be processed through
original gateway.
Config Finename
Type a name for the configuration file.
Download
The settings in this page can be saved as a file after clicking
such button. Later, the downloaded file can be imported to
Vigor2960 Series User’s Guide
335
the VPN client for building OpenVPN connection.
4
4
.
.
9
9
.
.
6
6
I
I
P
P
s
s
e
e
c
c
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
The IPsec services can provide access control, connectionless integrity, data origin
authentication, rejection of replayed packets that is a form of partial sequence integrity, and
confidentiality by encryption. These objectives are met through the use of two traffic
security protocols, the Authentication Header (AH) and the Encapsulating Security Payload
(ESP), and through the use of cryptographic key management procedures and protocols.
Available parameters are listed as follows:
Item Description
Preshared Key
Specify a key for IKE authentication.
IPsec User Preshared
Key
Specify a key for IPsec XAuth/EAP user authentication.
WAN Profile
Choose a WAN interface profile to be used.
To clear the selected one, click
to remove current
profile selections.
User Authentication
Type
Set IPsec user authentication to Local server, LDAP server
or RADIUS server.
DHCP LAN Profile
Choose one of the LAN profiles for VPN.
IKE Port
Type the UDP port number for Internet Key Exchange (IKE)
traffic to the VPN server.
NAT-T Port
Type the UDP port number for IPsec network address
translator traversal (NAT-T) traffic.
IPsec MSS
Type the maximum segment size (MSS) for IPsec VPN
tunnel.
Security Method
Select the encryption method (DES, 3DES, AES) for the
security of data transmission.
Vigor2960 Series User’s Guide
336
Apply
Click it to save the configuration.
Cancel
Click it to discard the settings configured in this page.
Enter all of the settings and click Apply.
4
4
.
.
9
9
.
.
7
7
V
V
P
P
N
N
P
P
r
r
o
o
f
f
i
i
l
l
e
e
s
s
The router allows you to create VPN profiles via the protocol of IPsec or PPTP (dial-in or
dial-out).
The router supports up to 200 VPN tunnels simultaneously. The following figure shows the
summary table.
4
4
.
.
9
9
.
.
7
7
.
.
1
1
I
I
P
P
s
s
e
e
c
c
T
T
u
u
n
n
n
n
e
e
l
l
Display the name of LAN to LAN profile with IPsec policy.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
profile.
Delete
Remove the selected profile.
To delete a profile, simply select the one you want to delete
and click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (200) of the object profiles to be
created.
Profile
Display the name of LAN to LAN profile with IPsec policy.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Vigor2960 Series User’s Guide
337
Dial-Out Through
Display the WAN interface selected for the profile.
Local IP / Subnet Mask
Display the LAN IP address with subnet mask of this profile.
Remote Host
Display the name of the remote host of this profile.
Remote IP / Subnet
Mask
Display the WAN IP address with subnet mask of this
profile.
More Remote Subnet
Display other LAN IP addresses with subnet mask which can
be used of this profile.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
I
I
P
P
s
s
e
e
c
c
V
V
P
P
N
N
p
p
r
r
o
o
f
f
i
i
l
l
e
e
The IPsec services can provide access control, connectionless integrity, data origin
authentication, rejection of replayed packets that is a form of partial sequence integrity, and
confidentiality by encryption. These objectives are met through the use of two traffic
security protocols, the Authentication Header (AH) and the Encapsulating Security Payload
(ESP), and through the use of cryptographic key management procedures and protocols.
1. Open VPN and Remote Access >> VPN Profiles.
2. Simply click the Add button.
3. The following dialog will appear. Click the Basic tab to configure the settings.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the profile.
Enable
Check this box to enable this profile.
Basic
Auto Dial-Out – Click Enable to make Vigor router
performing VPN connection based on the condition selected
(e.g., Always Dial-Out, if.wan1/wan2/usb1/usb2 down).
For Remote Dial-In User- Click Enable to allow the
connection via IPsec remote dial-in host.
Vigor2960 Series User’s Guide
338
Dial-Out Through- Choose a wan profile to be used by such
profile.
Failover to – Choose a wan profile which will lead the data
passing through other WAN automatically when the selected
WAN interface (in Dial-Out Through) is failover.
Local IP/Subnet Mask - Type the IP address and subnet
mask of local host.
Local Next Hop - Specify the gateway for WAN interface.
Usually, use the default setting (leave it in blank).
Remote Host - Type the WAN IP address for the remote
host.
Remote IP / Subnet Mask - Type the LAN IP address and
LAN subnet mask for the remote host.
More Remote Subnet – Add more remote subnet in this
field if required.
IKE Protocol – Choose IKEv1 or IKEv2.
IKE Phase 1 - Select from Main mode and Aggressive
mode. The ultimate outcome is to exchange security
proposals to create a protected secure channel. Main mode is
more secure than Aggressive mode since more exchanges
are done in a secure channel to set up the IPsec session.
However, the Aggressive mode is faster. The default value
in Vigor router is Main mode.
Auth Type - The authentication to be used by Pre-Shared
Key or RSA Signature. Choose PSK or RSA for such
profile.
Local Certificate - Choose a local certificate from the drop
down list if RSA is selected as Auth Type.
Local ID – Type the ID for Vigor2960 which can be
configured by the remote end. It is available for Aggressive
Mode enabled only.
Remote ID – Peer ID is on behalf of the IP address while
identity authenticating with remote VPN server. The length
of the ID is limited to 47 characters. It is available for
Aggressive Mode enabled only.
Preshared Key – Specify a key for IKE authentication if
PSK is selected as Auth Type.
Security Protocol – Choose ESP to specify the IPsec
protocol for the Encapsulating Security Payload protocol.
The data will be encrypted and authenticated. Choose AH to
specify the IPsec protocol for the Authentication Header
protocol. The data will be authenticated but not be
encrypted.
Apply
Click it to save the configuration.
Cancel
Click it to exit the page without saving the configuration.
The Advanced tab provides more parameters of IPsec tunnel, change setting if needed.
Vigor2960 Series User’s Guide
339
Available parameters are listed as follows:
Item Description
Phase 1 Key Life
Time
The rekey-renegotiated period of the IKE Phase1 keying
channel of a connection. The acceptable range is from 5 to
480 minutes (8 hours).
Phase 2 Key Life
Time
The rekey-renegotiated period of the IKE Phase 2 keying
channel of a connection. The acceptable range is from 5 to
480 minutes (8 hours).
Perfect Forward
Secrecy Status
Enable the PFS function. A new Diffie-Hellman Key
Exchange is included every time an encryption and/or
authentication key are computed on PFS.
Dead Peer
Detection Status
Enable or disable the DPD function.
DPD Delay
The keep-alive timer. A Hello message will be emitted
periodically when a tunnel is idle. Use the value 0 to disable
this function. The recommended value is 30 seconds if
enabled.
DPD Timeout
The timeout timer. The peer will be declared dead once no
acknowledge message is received after timeout value. Use
the value 0 to disable this function. The recommended value
is 120 seconds.
Ping to Keep Alive
Enable – Click it to enable such function.
Ping to the IP - If you enable the PING function, please
specify the IP address for the system to PING it for keeping
alive.
Route/NAT Mode
If the remote network only allows you to dial in with single
IP, please choose this mode, otherwise please choose Route
Mode.
Source IP
Choose one of the LAN profiles as a source IP.
Vigor2960 Series User’s Guide
340
Apply NAT Policy
Enable – This option allows for performing one-to-one NAT
for all traffic flowing across the VPN.
Translated Local Network – Specify the IP address with
subnet mask of the network that all traffic will be translated
into.
Netbios Naming
Packet
Enable – Click it to have an inquiry for data transmission
between the hosts located on both sides of VPN Tunnel
while connecting.
Disable –When there is conflict occurred between the hosts
on both sides of VPN Tunnel in connecting, such function
can block data transmission of Netbios Naming Packet inside
the tunnel.
Multicast via VPN
Some programs might send multicast packets via VPN
connection.
Enable – Click this button to let multicast packets pass
through the router.
Disable – This is default setting. Click this button to let
multicast packets be blocked by the router.
RIP via VPN
Enable – Click it to exchange routing information
protocol packets via VPN connection.
Disable – Disable such function. This is default setting.
Packet-Triggered
Enable – Click it to establish on-demand IPsec VPN.
The IPsec negotiation will be triggered by packets sent
to remote IP/subnet. This is default setting.
Disable – Disable such function.
Force UDP
Encapsulation
Enable – Click it to encapsulate all ISAKMP packets
with NAT-T encapsulation.
Disable –This is default setting.
Apply
Click it to save the configuration.
Cancel
Click it to exit the page without saving the configuration.
For GRE over IPsec Tunnel, please enable GRE function and enter your GRE IP for
both sides.
Vigor2960 Series User’s Guide
341
Available parameters are listed as follows:
Item Description
Enable GRE
Function
Click Enable to enable such function.
Local GRE IP
The virtual IP address of the router, specified for this tunnel.
Remote GRE IP
The virtual IP address of the remote client, specified for this
tunnel.
Auto Generate
GRE Key
Click Enable to enable such function.
If you click Disable, you have to type GRE In Key and
GRE Out Key respectively.
GRE In Key
Type the hexadecimal number as GRE In Key. This value is
used for the router to authenticate the source of the packet.
The length is 4 bytes
GRE Out Key
Type the hexadecimal number as GRE Out Key. This value
is used for the remote client to authenticate the source of the
packet. The length is 4 bytes.
Apply
Click it to save the configuration.
Cancel
Click it to exit the page without saving the configuration.
The Proposal tab lists encryption and authentication algorithms to be negotiated with
the remote IPsec peer. Change settings to meet the security requirement.
Vigor2960 Series User’s Guide
342
Available parameters are listed as follows:
Item Description
IKE Phase1
Proposal (Dial-Out)
Propose the local available authentication schemes and
encryption algorithms to the VPN peers, and get its feedback
to find a match.
IKE Phase1
Authentication
(Dial-Out)
Propose the local available algorithms to the VPN peers, and
get its feedback to find a match.
IKE Phase2
Proposal (Dial-Out)
Propose the local available authentication schemes and
encryption algorithms to the VPN peers, and get its feedback
to find a match.
IKE Phase2
Authentication
(Dial-Out)
Propose the local available algorithms to the VPN peers, and
get its feedback to find a match.
Accepted Proposal
(Dial-In)
For the dial-in VPN user, please specify the limitation of the
proposal.
acceptall - When the VPN tunnel is established, all the
proposals supported by this device will be accepted and
applied.
acceptabove - When the VPN tunnel is established, only the
selected proposal will be accepted and applied by this
device.
Apply
Click it to save the configuration.
Cancel
Click it to exit the page without saving configuration.
Multiple SAs will negotiate IPSec SAs in IKE phase 2 to establish multiple IPSec
tunnels for each subnet routing. Configure if required.
Vigor2960 Series User’s Guide
343
Available parameters are listed as follows:
Item Description
Enable
An IPsec VPN profile can support 1 up to 16 multiple SAs
(security association). Check the one you want to enable it.
Local IP /Subnet
Mask
Type the IP address and subnet mask of local host.
Remote IP /Subnet
Mask
Type the LAN IP address and LAN subnet mask for the
remote host.
4. After filling the required information, click Apply and a new IPsec LAN-to-LAN
profile will be created.
Vigor2960 Series User’s Guide
344
4
4
.
.
9
9
.
.
7
7
.
.
2
2
P
P
P
P
T
T
P
P
D
D
i
i
a
a
l
l
-
-
o
o
u
u
t
t
/
/
S
S
S
S
L
L
D
D
i
i
a
a
l
l
-
-
o
o
u
u
t
t
T
T
u
u
n
n
n
n
e
e
l
l
Display the name of LAN to LAN profile with PPTP dial-out/SSL dial-out tunnel.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
profile.
Delete
Remove the selected profile.
To delete a profile, simply select the one you want to delete
and click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (200) of the object profiles to be
created.
Profile
Display the name of LAN to LAN profile with PPTP/SSL
dial-out policy.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Dial-Out Through
Display the WAN interface selected for the profile.
Server IP/Host Name
Display the IP address or the host name of PPTP/SSL server.
PPTP User Name/
SSL User Name
Display the user name for authentication in PPTP/SSL
connection.
Local IP / Subnet Mask
Display the LAN IP address with subnet mask of this profile.
Remote IP / Subnet
Mask
Display the WAN IP address with subnet mask of this
profile.
Vigor2960 Series User’s Guide
345
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
P
P
P
P
T
T
P
P
D
D
i
i
a
a
l
l
-
-
O
O
u
u
t
t
/
/
S
S
S
S
L
L
D
D
i
i
a
a
l
l
-
-
o
o
u
u
t
t
V
V
P
P
N
N
p
p
r
r
o
o
f
f
i
i
l
l
e
e
Below will guide you to create a PPTP/SSL dial-out profile for VPN connection:
1. Open VPN and Remote Access >> VPN Profiles.
2. witch to the tab of PPTP Dial-Out/SSL Dial-Out Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the profile.
Enable
Check this box to enable this profile.
Always On
Click Enable to make the profile being always on.
Dial-Out Through
Choose a wan interface to be used by such profile. Then, use
the default WAN IP or specify a WAN Alias IP for VPN
tunnel.
Failover to
Choose a wan profile which will lead the data passing
through other WAN automatically when the selected WAN
interface (in Dial-Out Through) is failover.
Idle Timeout (sec)
If the user is idle over the limitation of the timer, the
network connection will be stopped for such user. By
default, the Idle Timeout is set to 300 seconds.
Server IP/Host
Name
Type the IP address or the host name of PPTP/SSL server.
PPTP User Name/
Type a user name for authentication in PPTP/SSL
Vigor2960 Series User’s Guide
346
SSL User Name
connection.
PPTP Password/
SSL Password
Type a password for authentication in PPTP/SSL connection.
Local IP/Subnet
Mask
Type the IP address and subnet mask of local host.
Remote IP / Subnet
Mask
Type the LAN IP address and LAN subnet mask for the
remote host.
Route / NAT Mode
Specify the purpose for such profile.
Netbios Naming
Packet
Enable – Click it to have an inquiry for data transmission
between the hosts located on both sides of VPN Tunnel
while connecting.
Disable – When there is conflict occurred between the hosts
on both sides of VPN Tunnel in connecting, such function
can block data transmission of Netbios Naming Packet inside
the tunnel.
Multicast via VPN
Some programs might send multicast packets via VPN
connection.
Enable – Click this button to let multicast packets pass
through the router.
Disable – This is default setting. Click this button to let
multicast packets be blocked by the router.
RIP via VPN
Enable – Click it to exchange routing information
protocol packets via VPN connection.
Disable – Disable such function. This is default setting.
Apply
Click it to save the configuration.
Cancel
Click it to exit the page without saving the configuration.
4. Enter all of the settings and click Apply.
5. A new PPTP/SSL Dial-Out VPN profile has been created.
Vigor2960 Series User’s Guide
347
4
4
.
.
9
9
.
.
7
7
.
.
3
3
P
P
P
P
T
T
P
P
D
D
i
i
a
a
l
l
-
-
i
i
n
n
/
/
S
S
S
S
L
L
D
D
i
i
a
a
l
l
-
-
i
i
n
n
T
T
u
u
n
n
n
n
e
e
l
l
Display the name of LAN to LAN profile with PPTP dial-in/SSL dial-in tunnel.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
profile.
Delete
Remove the selected profile.
To delete a profile, simply select the one you want to delete
and click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (200 for PPTP, 50 for SSL) of the
object profiles to be created.
Profile
Display the name of LAN to LAN profile with PPTP/SSL
dial-in policy.
Enable
Display the status of the profile. False means disabled; True
means enabled.
PPTP User Name /
SSL User Name
Display the user name for authentication in PPTP/SSL
connection.
Local IP / Subnet Mask
Display the LAN IP address with subnet mask of this profile.
Remote IP / Subnet
Mask
Display the WAN IP address with subnet mask of this
profile.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
P
P
P
P
T
T
P
P
D
D
i
i
a
a
l
l
-
-
I
I
n
n
/
/
S
S
S
S
L
L
D
D
i
i
a
a
l
l
-
-
I
I
n
n
V
V
P
P
N
N
p
p
r
r
o
o
f
f
i
i
l
l
e
e
Below will guide you to create a PPTP dial-in/SSL dial-in profile for VPN connection:
1. Open VPN and Remote Access >> VPN Profiles.
Vigor2960 Series User’s Guide
348
2. Switch to the tab of PPTP Dial-in/SSL Dial-In. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Display the name of the profile.
Enable
Check this box to enable this profile.
PPTP User Name /
SSL User Name
Choose a PPTP/SSL user profile for authentication in
PPTP/SSL connection.
Such profile shall be created in User Management>>User
Profile previously.
Local IP/Subnet
Mask
Type the IP address and subnet mask of local host.
Remote IP / Subnet
Mask
Type the LAN IP address and LAN subnet mask for the
remote host.
Netbios Naming
Packet
Enable – Click it to have an inquiry for data transmission
between the hosts located on both sides of VPN Tunnel
while connecting.
Disable –When there is conflict occurred between the hosts
on both sides of VPN Tunnel in connecting, such function
can block data transmission of Netbios Naming Packet inside
the tunnel.
Multicast via VPN
Some programs might send multicast packets via VPN
connection.
Enable – Click this button to let multicast packets pass
through the router.
Disable – This is default setting. Click this button to let
multicast packets be blocked by the router.
RIP via VPN
Enable – Click it to exchange routing information
protocol packets via VPN connection.
Disable – Disable such function. This is default setting.
Vigor2960 Series User’s Guide
349
Apply
Click it to save the configuration.
Cancel
Click it to exit the page without saving the configuration.
4. Enter all of the settings and click Apply.
5. A new PPTP/SSL Dial-In LAN-to-LAN profile has been created.
4
4
.
.
9
9
.
.
7
7
.
.
4
4
G
G
R
R
E
E
T
T
u
u
n
n
n
n
e
e
l
l
Display the name of LAN to LAN profile with GRE tunnel.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
profile.
Delete
Remove the selected profile.
To delete a profile, simply select the one you want to delete
and click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number of the object profiles to be created.
Profile
Display the name of LAN to LAN profile with GRE policy.
Enable
Display the status of the profile. False means disabled; True
means enabled.
WAN Interface
Display the WAN interface used for GRE tunnel.
Remote IP
Display the WAN IP address with subnet mask of this
profile.
GRE IP
Display the GRE interface IP address for local host.
Vigor2960 Series User’s Guide
350
Remote IP / Subnet
Mask
Display the IP address and subnet mask of remote client.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
G
G
R
R
E
E
V
V
P
P
N
N
p
p
r
r
o
o
f
f
i
i
l
l
e
e
Below will guide you to create a GRE profile for VPN connection:
1. Open VPN and Remote Access >> VPN Profiles.
2. Switch to the tab of GRE. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Display the name of the profile.
Enable
Check this box to enable this profile.
WAN Interface
Specify a WAN interface used for GRE tunnel.
Remote IP
Type the LAN IP address for the remote host.
GRE IP
Type the GRE interface IP address for local host.
Remote IP/Subnet
Mask
Type the IP address and subnet mask of remote client.
Apply
Click it to save the configuration.
Cancel
Click it to exit the page without saving the configuration.
4. Enter all of the settings and click Apply.
5. A new GRE LAN-to-LAN profile has been created.
Vigor2960 Series User’s Guide
351
4
4
.
.
9
9
.
.
8
8
V
V
P
P
N
N
T
T
r
r
u
u
n
n
k
k
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
VPN Load Balance Mechanism can set multiple VPN tunnels for using as traffic load
balance tunnel. It can assist users to do effective load sharing for multiple VPN tunnels
according to real line bandwidth. Moreover, it offers three types of algorithms for load
balancing and binding tunnel policy mechanism to let the administrator manage the network
more flexibly.
Three types of load sharing algorithm offered, Round Robin, Weighted Round Robin
and Fastest
Binding Tunnel Policy mechanism allows users to encrypt the data in transmission or
specified service function in transmission and define specified VPN Tunnel for having
effective bandwidth management
Dial-out connection types contain IPsec, PPTP, L2TP, L2TP over IPsec and GRE over
IPsec
The web page is simple to understand and easy to configure
The TCP Session transmitted by using VPN TRUNK-VPN Load Balance mechanism will
not be lost due to one of VPN Tunnels disconnected. Users do not need to reconnect with
setting TCP/UDP Service Port again. The VPN Load Balance function can keep the
transmission for internal data on tunnel stably.
Vigor2960 Series User’s Guide
352
4
4
.
.
9
9
.
.
8
8
.
.
1
1
L
L
o
o
a
a
d
d
B
B
a
a
l
l
a
a
n
n
c
c
e
e
P
P
o
o
o
o
l
l
This page allows the user to integrate several WAN profiles as a pool profile specified with
the function of load balance or failover.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
profile.
Delete
Remove the selected profile.
To delete a profile, simply select the one you want to delete
and click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (32) of the profiles to be created.
Profile
Display the name of the profile.
Mode
Display which mode (load_balance or failover) is selected.
Interface
Display the name of the Load Balance profile grouped under
such pool profile.
Primary Interface
Display the primary interface for failover.
Backup Interface
Display the backup interface for failover.
Vigor2960 Series User’s Guide
353
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
a
a
L
L
o
o
a
a
d
d
B
B
a
a
l
l
a
a
n
n
c
c
e
e
P
P
o
o
o
o
l
l
P
P
r
r
o
o
f
f
i
i
l
l
e
e
1. Open VPN and Remote Access >>VPN TRUNK Management and click the Load
Balance Pool tab.
2. Simply click the Add button.
3. The following dialog will appear. Type the name of the profile (e.g., LB_Pool_1,
within 10 characters including digit, letter, and underline) under the Mode tab.
Available settings are listed below:
Item Description
Profile
Type the name of the profile (e.g., LB_Pool_1, within 10
characters including digit, letter, and underline).
Mode
Choose Load Balance or Failover.
Load Balance
Interface – Choose VPN profile(s) as the
interface.
Note: Only the IPsec VPN profiles with GRE
function enabled will be listed and selected as
Interface setting. If there is nothing displayed,
please go to VPN and Remote Access>>VPN
Profiles to create a new IPsec VPN profile with
GRE function enabled first.
Weight – Type a value in such field.
Failover
Primary Interface / Backup Interface - Use the
drop down list to specify the VPN profiles for
Primary Interface and Backup Interface
respectively.
Vigor2960 Series User’s Guide
354
Important!!! If there is no selection for Interface option, please go to VPN and
Remote Access>>VPN Profiles to create a new IPsec LAN to LAN profile with
enabled GRE setting. Then, return to this page to specify the Interface option.
4. Enter all of the settings and click Apply.
5. A new profile has been created.
Refer to Chapter 3, How to Configure VPN Load Balance between Vigor2960 and Other
Router for getting more detailed information about Load Balance application.
4
4
.
.
9
9
.
.
8
8
.
.
2
2
L
L
o
o
a
a
d
d
B
B
a
a
l
l
a
a
n
n
c
c
e
e
R
R
u
u
l
l
e
e
To build VPN load balance connection with other router, you can define the load balance
rule in this page.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
profile.
Delete
Remove the selected profile.
To delete a profile, simply select the one you want to delete
and click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (128) of the profiles to be created.
Profile
Display the name of the profile.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Protocol
Display the protocol configured by such profile.
Source IP Address
Display the source IP address specified for this profile.
Vigor2960 Series User’s Guide
355
Source Mask
Display the subnet mask address specified for the source IP
of this entry.
Destination IP Address
Display the destination IP address specified for this entry.
Destination Mask
Display the subnet mask address specified for the destination
IP of this entry.
Destination Port Start
Display the start point specified in the Dest Port Range for
this entry.
Destination Port End
Display the end point specified in the Dest Port Range for
this entry.
Load Balance Pool
Display the load balance pool selected for such rule.
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
a
a
L
L
o
o
a
a
d
d
B
B
a
a
l
l
a
a
n
n
c
c
e
e
R
R
u
u
l
l
e
e
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open VPN and Remote Access >>VPN TRUNK Management and click the Load
Balance Rule tab.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the profile.
Enable
Check this box to enable such profile.
Protocol
Type the protocol configured by such profile.
Source IP Address
Type the source IP address specified for this profile.
Source Mask
Type the subnet mask address specified for the source IP.
Destination IP
Address
Type the destination IP address specified for this entry.
Vigor2960 Series User’s Guide
356
Destination Mask
Type the subnet mask address specified for the destination
IP.
Destination Port
Start
Type the start point.
Destination Port
End
Type the end point.
Load Balance Pool
Use the drop down list to choose one profile configured in
load balance pool. Then, such rule will be applied by the
pool.
Apply
Click it to save the configuration.
Cancel
Click it to exit the page without saving the configuration.
4. Enter all of the settings and click Apply.
5. A new profile has been created.
4
4
.
.
9
9
.
.
9
9
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
o
o
n
n
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
4
4
.
.
9
9
.
.
9
9
.
.
1
1
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
o
o
n
n
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
You can find the summary table of all VPN connections. You may disconnect any VPN
connection by clicking Disconnect button.
Each item will be explained as follows:
Item Description
IPsec/PPTP/SSL
Click it to perform IPsec VPN/PPTP/SSL connection.
Profile
This filed displays the profile configured in LAN-to-LAN
(with Index number and VPN Server IP address). The VPN
connection built by General Mode does not support VPN
backup function.
Connect
Click this button to execute dial out function.
Refresh
Renew current web page.
Vigor2960 Series User’s Guide
357
Auto Refresh
Specify the interval of refresh time to obtain the latest status.
The information will update immediately when the Refresh
button is clicked.
VPN
Display the name of VPN profile.
Type
Display the connection type (PPTP or IPsec) for such VPN
profile.
Interface
Display the WAN interface for such VPN profile.
Remote IP
Display the remote IP configure by VPN profile.
Virtual Network
Display the virtual network established by such VPN profile.
Up Time
Display the connection time of this VPN tunnel.
RX (Packets)
Display the total received packets through this VPN.
TX (Packets)
Display the total transmitted packets through this VPN.
Operation
Display the icons to terminate / view the VPN profile.
4
4
.
.
9
9
.
.
9
9
.
.
2
2
H
H
i
i
s
s
t
t
o
o
r
r
y
y
This page displays the history of VPN connection.
Each item will be explained as follows:
Item Description
VPN
Display the name of VPN profile.
Type
Display the connection type used of such VPN.
Remote IP
Display the IP address of the remote end.
Action
Display the connection status (UP or DOWN) of VPN
profile.
Time
Display the time the VPN profile connects/disconnects.
Vigor2960 Series User’s Guide
358
4
4
.
.
1
1
0
0
C
C
e
e
r
r
t
t
i
i
f
f
i
i
c
c
a
a
t
t
e
e
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
A digital certificate works as an electronic ID, which is issued by a certification authority
(CA). It contains information such as your name, a serial number, expiration dates etc., and
the digital signature of the certificate-issuing authority so that a recipient can verify that the
certificate is real. Here Vigor router support digital certificates conforming to standard
X.509.
Any entity wants to utilize digital certificates should first request a certificate issued by a CA
server. It should also retrieve certificates of other trusted CA servers so it can authenticate
the peer with certificates issued by those trusted CA servers.
Here you can generate and manage the local digital certificates, and set trusted CA
certificates. Remember to adjust the time of Vigor router before using the certificate so that
you can get the correct valid period of certificate.
Below shows the menu items for Certificate Management.
Local certificate is created by the end user and must be signed by a trusted CA center.
Vigor2960 Series User’s Guide
359
4
4
.
.
1
1
0
0
.
.
1
1
L
L
o
o
c
c
a
a
l
l
C
C
e
e
r
r
t
t
i
i
f
f
i
i
c
c
a
a
t
t
e
e
This page allows users to generate certificate based on different work requests. Local
certificate can be signed by itself or signed by a root CA.
Each item will be explained as follows:
Item Description
Upload
Click this button to open the following dialog to upload
selected certificate onto the router.
After choosing the certificate file type, type the required
information and choose the required file (e.g., Key
Passphrase, Key File, PKCS12 Password and PKCS12 File).
Later, click Upload on the dialog to upload the file onto
Vigor router.
Vigor2960 Series User’s Guide
360
Delete
Remove the selected item of local certificate listed below.
Download
Allow you to download an existing local certificate to the
router.
Generate
Open another web page for generating the local certificate.
Name
Display the name of local certificate.
Issuer
Display the issuer of local certificate.
Subject
Display the subject of local certificate.
Status
Display the status of local certificate.
Valid From
Display the starting point of the valid time of local
certificate.
Valid To
Display the end point of the valid time of local certificate
H
H
o
o
w
w
t
t
o
o
b
b
u
u
i
i
l
l
d
d
a
a
l
l
o
o
c
c
a
a
l
l
c
c
e
e
r
r
t
t
i
i
f
f
i
i
c
c
a
a
t
t
e
e
1. Open Certificate Management>> Local Certificate.
2. Simply click the Generate button.
3. The following dialog will appear.
Vigor2960 Series User’s Guide
361
Available parameters are listed as follows:
Item Description
Certificate Name
Type the name of the local certificate.
ID Type
The ID type for such certificate. There are four types:
Domain Name: Certificated by domain name.
IP: Certificated by IP address.
Email: Certificated by email address.
None: Do not enter an ID value.
ID Value
The ID value is determined by the ID Type selected for such
certificate.
For example, if you choose Domain Name as the ID Type,
please type the domain name in this field.
Country(C)
Type the name of the country that such certificate located.
State(S)
Type the name of the state /province for such certificate.
Locality (L)
Type the name of the city for such certificate.
Organization (O)
Type a description for the organization unit.
Organization (OU)
Type the name of the organization.
Common
Name(CN)
Type the common name for such certificate.
Email(E)
Type the e-mail address for such certificate.
Key Size
Choose one of the key sizes for such certificate.
Self Sign
Enable – Click it to use the router’s built-in default
certificate. The default certificate can be used in SSL VPN
server and HTTPS Web Proxy.
CA Key Passphrase
Type characters as encryption.
Apply
Click it to create a new local certificate based on the
configuration here.
Cancel
Click it to exit the web page without saving the
configuration.
4. Enter all of the settings and click Apply.
5. A new generated Local Certificate has been created.
Vigor2960 Series User’s Guide
362
H
H
o
o
w
w
t
t
o
o
d
d
o
o
w
w
n
n
l
l
o
o
a
a
d
d
a
a
l
l
o
o
c
c
a
a
l
l
c
c
e
e
r
r
t
t
i
i
f
f
i
i
c
c
a
a
t
t
e
e
i
i
n
n
t
t
o
o
s
s
p
p
e
e
c
c
i
i
f
f
i
i
e
e
d
d
l
l
o
o
c
c
a
a
t
t
i
i
o
o
n
n
Vigor router allows you to generate a certificate request and submit it the CA server. After
generating a local certificate, you can download it as a file into any place you want.
If you have already gotten a certificate from a third party, you may import it directly. The
supported types are PKCS12 Certificate and Certificate with a private key.
1. Open Certificate Management>> Local Certificate.
2. Specify a certificate and click the Download button.
3. Click Save. The file will be stored under the folder you specified above.
H
H
o
o
w
w
t
t
o
o
u
u
p
p
l
l
o
o
a
a
d
d
a
a
l
l
o
o
c
c
a
a
l
l
c
c
e
e
r
r
t
t
i
i
f
f
i
i
c
c
a
a
t
t
e
e
1. Open Certificate Management>> Local Certificate.
2. Click Upload to open the following dialog.
Vigor2960 Series User’s Guide
363
3. Choose Local Certificate and click the Select button to open the follwoing dialog.
4. From the above dialog, choose the certificate you want and click Open. The dialog box
with the selected certificate file name will be shown as follows.
5. Click Upload. The system will start to upload the selected file.
Vigor2960 Series User’s Guide
364
4
4
.
.
1
1
0
0
.
.
2
2
T
T
r
r
u
u
s
s
t
t
e
e
d
d
C
C
A
A
C
C
e
e
r
r
t
t
i
i
f
f
i
i
c
c
a
a
t
t
e
e
The CA (certification authority) certificate specified in this page is the issuer of the
certificates for both clients requesting for network connection.
It allows you to import the third-party certificate authenticated by other certification
authority (CA) to be used as a CA for signing the local certicate.
Just create a new Trust CA Certificate first.
Each item will be explained as follows:
Item Description
Upload
Click this button to open the following dialog to upload
selected certificate onto the router.
After choosing the trusted CA mode, type the required
information and choose the required file (e.g., Key
Vigor2960 Series User’s Guide
365
Passphrase, Key File, PKCS12 Password and PKCS12 File).
Later, click Upload on the dialog to upload the file onto
Vigor router.
Delete
Remove the selected item of trusted CA listed below.
Download
Allow you to download an existing trusted CA certificate to
the router.
Build RootCA
Open another web page for generating the trusted CA
certificate.
Name
Display the name of trusted certificate built.
Subject
Display the subject of trusted certificate built.
Issuer
Display the issuer of trusted certificate built.
Status
Display the status of trusted certificate built.
Valid From
Display the starting point of the valid time of trusted
certificate.
Valid To
Display the end point of the valid time of trusted certificate.
Vigor2960 Series User’s Guide
366
4
4
.
.
1
1
0
0
.
.
3
3
R
R
e
e
m
m
o
o
t
t
e
e
C
C
e
e
r
r
t
t
i
i
f
f
i
i
c
c
a
a
t
t
e
e
This page allows users to upload acceptable certificate of remote client.
Each item will be explained as follows:
Item Description
Upload
Click this button to open the following dialog to upload
selected certificate onto the router.
After choosing the PKCS12 Certificate mode, type the
required information and choose the required file (e.g.,
PKCS12 Password and PKCS12 File).
Later, click Upload on the dialog to upload the file onto
Vigor router.
Delete
Remove the selected item of trusted CA listed below.
Vigor2960 Series User’s Guide
367
Download
Allow you to download an existing trusted CA certificate to
the router.
Sign
Click it to make the selected certificate to be used as a
certificate.
Name
Display the name of certificate built.
Subject
Display the subject of certificate built.
Status
Display the status of certificate built.
Vigor2960 Series User’s Guide
368
4
4
.
.
1
1
1
1
S
S
S
S
L
L
P
P
r
r
o
o
x
x
y
y
An SSL VPN (Secure Sockets Layer virtual private network) is a form of VPN that can be
used with a standard Web browser.
There are two benefits that SSL VPN provides:
It is not necessary for users to preinstall VPN client software for executing SSL VPN
connection.
There are less restrictions for the data encrypted through SSL VPN in comparing with
traditional VPN.
4
4
.
.
1
1
1
1
.
.
1
1
S
S
S
S
L
L
W
W
e
e
b
b
P
P
r
r
o
o
x
x
y
y
SSL Web Proxy will allow the remote users to access the internal web sites over
SSL.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
profile.
Delete
Remove the selected profile.
To delete a profile, simply select the one you want to delete
and click the Delete button.
Refresh
Renew current web page.
Vigor2960 Series User’s Guide
369
Profile Number Limit
Display the total number (30) of the profiles to be created.
Profile
Display the name of the profile that you create.
URL
Display the URL.
Host IP Address
Display the IP address for the Host.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
S
S
S
S
L
L
W
W
e
e
b
b
P
P
r
r
o
o
x
x
y
y
1. Open SSL VPN>> SSL Web Proxy.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type name of the profile.
URL
Type the address (function variation or IP address) or path of
the proxy server.
Host IP Address
If you type function variation as URL, you have to type
corresponding IP address in this filed. Such field must match
with URL setting.
Apply
Click it to save the configuration.
Cancel
Click it to exit the page without saving the configuration.
4. Enter all of the settings and click Apply.
5. A new SSL Web Proxy profile has been created.
Vigor2960 Series User’s Guide
370
4
4
.
.
1
1
1
1
.
.
2
2
S
S
S
S
L
L
A
A
p
p
p
p
l
l
i
i
c
c
a
a
t
t
i
i
o
o
n
n
It provides a secure and flexible solution for network resources, including VNC (Virtual
Network Computer) /RDP (Remote Desktop Protocol), to any remote user with access to
Internet and a web browser.
4
4
.
.
1
1
1
1
.
.
2
2
.
.
1
1
V
V
N
N
C
C
VNC stands for Virtual Network Computing. It allows you to access and control a remote
PC through VNC protocol.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
profile.
Delete
Remove the selected profile.
To delete a profile, simply select the one you want to delete
and click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (30) of the profiles to be created.
Profile
Display the name of the profile that you create.
IP Address
Display the IP address for this protocol.
Port
Display the port used for this protocol.
Scaling
Display the percentage for such application.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
S
S
S
S
L
L
A
A
p
p
p
p
l
l
i
i
c
c
a
a
t
t
i
i
o
o
n
n
w
w
i
i
t
t
h
h
V
V
N
N
C
C
p
p
r
r
o
o
t
t
o
o
c
c
o
o
l
l
1. Open SSL VPN>> SSL Application and click the VNC tab.
2. Simply click the Add button.
Vigor2960 Series User’s Guide
371
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the profile that you create.
IP Address
Type the IP address for this protocol.
Port
Specify the port used for this protocol. The default setting is
5900.
Scaling
Chose the percentage (100%, 80%, 60%) for such
application.
Apply
Click it to save the configuration.
Cancel
Click it to exit the page without saving the configuration.
4. Enter all of the settings and click Apply.
5. A new SSL Application profile has been created.
Vigor2960 Series User’s Guide
372
4
4
.
.
1
1
1
1
.
.
2
2
.
.
2
2
R
R
D
D
P
P
RDP stands for Remote Desktop Protocol. It allows you to access and control a remote PC
through RDP protocol.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
profile.
Delete
Remove the selected profile.
To delete a profile, simply select the one you want to delete
and click the Delete button.
Refresh
Renew current web page.
Profile Number Limit
Display the total number (30) of the profiles to be created.
Profile
Display the name of the profile that you create.
IP Address
Display the IP address for this protocol.
Port
Display the port used for this protocol.
Screen Size
Display the screen size for such application.
H
H
o
o
w
w
t
t
o
o
c
c
r
r
e
e
a
a
t
t
e
e
a
a
n
n
e
e
w
w
S
S
S
S
L
L
A
A
p
p
p
p
l
l
i
i
c
c
a
a
t
t
i
i
o
o
n
n
w
w
i
i
t
t
h
h
R
R
D
D
P
P
p
p
r
r
o
o
t
t
o
o
c
c
o
o
l
l
1. Open SSL VPN>> SSL Application and click the RDP tab.
2. Simply click the Add button.
3. The following dialog will appear.
Vigor2960 Series User’s Guide
373
Available parameters are listed as follows:
Item Description
Profile
Type the name of the profile that you create.
IP Address
Type the IP address for this protocol.
Port
Specify the port used for this protocol.
Screen Size
Chose the screen size for such application.
Apply
Click it to save the configuration.
Cancel
Click it to exit the page without saving the configuration.
4. Enter all of the settings and click Apply.
5. A new SSL Application profile has been created.
Vigor2960 Series User’s Guide
374
4
4
.
.
1
1
1
1
.
.
3
3
O
O
n
n
l
l
i
i
n
n
e
e
U
U
s
s
e
e
r
r
S
S
t
t
a
a
t
t
u
u
s
s
If you have finished the configuration of SSL Web Proxy (server), users can find out
corresponding settings when they access into DrayTek SSL VPN portal interface.
Each item will be explained as follows:
Item Description
Refresh
Renew current web page.
Auto Refresh
Specify the interval of refresh time to obtain the latest status.
The information will update immediately when the Refresh
button is clicked.
User Name
Display current user who visit SSL VPN server.
Remote IP
Display the IP address for the host.
Time out
Display the time remaining for logging out.
Vigor2960 Series User’s Guide
375
4
4
.
.
1
1
2
2
B
B
a
a
n
n
d
d
w
w
i
i
d
d
t
t
h
h
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
Below shows the menu items for Bandwidth Management.
The QoS (Quality of Service) guaranteed technology in the Vigor router allows the network
administrator to monitor, analyze, and allocate bandwidth for various types of network
traffic in real-time and/or for business-critical traffic. Thus, timing-sensitive applications will
not be impacted by web surfing traffic or other non-critical applications, such as file transfer.
Without QoS-guaranteed control, there would be virtually no way to prioritize users/services
or guarantee allocation of finite bandwidth resources to network or servers for supporting
timing-sensitive and mission-critical network applications, such as VoIP (Voice over IP) and
online gaming applications.
Differentiated quality of service is therefore one of the most important issues over the
Internet infrastructure. In Vigor router, DSCP (Differentiated Service Code Point) support is
also taken into consideration in the design of the QoS-guaranteed control module.
The QoS function handles incoming and outgoing classes independently. Users can
configure incoming or outgoing separately without any impact on the other.
4
4
.
.
1
1
2
2
.
.
1
1
Q
Q
u
u
a
a
l
l
i
i
t
t
y
y
o
o
f
f
S
S
e
e
r
r
v
v
i
i
c
c
e
e
The QoS function handles incoming and outgoing classes independently. Users can
configure incoming or outgoing separately without any impact on the other.
4
4
.
.
1
1
2
2
.
.
1
1
.
.
1
1
Q
Q
o
o
S
S
S
S
t
t
a
a
t
t
u
u
s
s
This page displays current QoS Status.
Vigor2960 Series User’s Guide
376
4
4
.
.
1
1
2
2
.
.
1
1
.
.
2
2
S
S
o
o
f
f
t
t
w
w
a
a
r
r
e
e
Q
Q
o
o
S
S
This page displays current software QoS status and allows you to edit related settings,
including bandwidth, queue (high, medium, normal and low) for each QoS WAN.
Available parameters are listed as follows:
Item Description
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
profile.
Refresh
Renew current web page.
WAN
Display the WAN interface used for QoS.
Outgoing Status
Display bandwidth for the outgoing data is enabled or
disabled.
Outgoing Bandwidth
Display the total number of transmission rate for the
outgoing data.
Incoming Status
Display the total number of transmission rate for the
incoming data.
Incoming Bandwidth
Display bandwidth for the incoming data is enabled or
disabled.
H
H
o
o
w
w
t
t
o
o
e
e
d
d
i
i
t
t
a
a
Q
Q
o
o
S
S
P
P
r
r
o
o
f
f
i
i
l
l
e
e
Follow the steps below to create a new maintenance profile.
1. Click one of the QoS WAN profiles to select the one you want to edit.
2. Click Edit.
Vigor2960 Series User’s Guide
377
3. The QoS settings page appears.
Available parameters are listed as follows:
Item Description
WAN
Use the drop down list to set WAN interface for QoS by
choosing one of the WAN interfaces.
Status
Enable – Click it to enable such profile.
Disable – Click it to disable the QoS profile.
Bandwidth
Type the number as the total transmission rate for the
outgoing /incoming data. The range can be set from 64000 to
10000000.
Click the unit (Kbps or Mbps) for such rate.
High/Medium/
Normal/Low
There are several available outgoing queues. All queues in
the data group to be initialized with weights of zero,
resulting in a strict service to completion (STC) mechanism
across all queues.0.
Type the weight of queues in bytes, range from 0 to
1000000.
Apply
Click it to save and exit the dialog.
Vigor2960 Series User’s Guide
378
Cancel
Click it to exit the dialog without saving anything.
4. Enter all of the settings and click Apply.
4
4
.
.
1
1
2
2
.
.
1
1
.
.
3
3
H
H
a
a
r
r
d
d
w
w
a
a
r
r
e
e
Q
Q
o
o
S
S
This page allows you to configure bandwidth of data and voice signals transmission for
outgoing data and incoming data through hardware interface.
Note: The difference between Hardware QoS and Software QoS is that only one WAN
interface is supported by Hardware QoS. However, there are six WAN interfaces supported
by Software QoS.
Available parameters are listed as follows:
Item Description
WAN
Use the drop down list to choose the WAN interface to apply
hardware QoS.
Status
Enable – Click it to enable QoS for outgoing/incoming
traffic.
Disable – Click it to disable QoS for outgoing/incoming
traffic.
Bandwidth
Type the number as the total transmission rate for the
outgoing /incoming data. The range can be set from 64 to
1000000 kbps.
Click the unit (Kbps or Mbps) for such rate.
High/Medium/
Normal/Low
It determines the weight for each queue. All queues in the
data group to be initialized with weights of zero, resulting in
a strict service to completion (STC) mechanism across all
queues.0.
Type the weight of queues in bytes, range from 0 to
1000000.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
Enter all of the settings and click Apply.
Vigor2960 Series User’s Guide
379
4
4
.
.
1
1
2
2
.
.
2
2
Q
Q
o
o
S
S
R
R
u
u
l
l
e
e
There are 32 filter rules that can be configured in such page for incoming and outgoing data.
4
4
.
.
1
1
2
2
.
.
2
2
.
.
1
1
Q
Q
o
o
S
S
R
R
u
u
l
l
e
e
Available parameters are listed as follows:
Item Description
Add
Add a new rule profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
profile.
Delete
Remove the selected profile.
To delete a profile, simply select the one you want to delete
and click the Delete button.
Rename
Allow to modify the selected profile name.
Refresh
Renew current web page.
Profile
Display the name of the profile for the filter.
Profile Number Limit
Display the total number (32) of the profiles to be created.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Local IP Object
Display the source IP address for the filter.
Remote IP Object
Display the destination IP address for the filter.
Service Type
Display the service type (e.g., IKE, HTTP, AUTH and etc)
for the filter.
Match Type
Display the match type (e.g., TOS or DSCP) for the filter.
DSCP
Display the setting of DSCP.
Vigor2960 Series User’s Guide
380
TOS
Display the setting of TOS.
Traffic Class
Display the queue number that such filter is categorized.
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
a
a
Q
Q
o
o
S
S
r
r
u
u
l
l
e
e
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Bandwidth Management>> QoS Rule.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the filter profile.
Enable
Check this box to enable such profile.
Match Type
Use the drop down list to specify a suitable match type.
DSCP
It is available when DSCP is selected as the Match type.
Vigor2960 Series User’s Guide
381
TOS
It is available when TOS is selected as the Match type.
Traffic Class
Choose a level to category the packets matching with the
condition configured as above. High is the highest; Normal
is the lowest.
Local Address
Click
on the left side of the Source IP Object/Source IP
Group profile. Check the object profile(s) as the source
target.
Local IP Object – Use the drop down list to choose one of
the IP objects for such rule profile.
Local IP Group – Use the drop down list to choose one of
the IP group for such rule profile.
If you want to create a new IP object, simply click
to
open the following dialog.
Vigor2960 Series User’s Guide
382
Profile – type a new name for such IP object.
Address Type –Choose the address type (Single or
Range) for such rule. Each type will bring different
settings for configuration.
Start IP Address - Type the IP address of the starting
point for such profile.
End IP Address - Type the IP address of the ending
point for such profile if you choose Range as Address
Type.
Subnet Mask – Choose the subnet mask from the drop
down list if you choose Subnet as Address Type.
Remote Address
Click
on the left side of the Remote IP Object/ Remote
IP Group profile. Check the object profile(s) as the
destination target.
Remote IP Object – Use the drop down list to choose one of
the destination IP objects for such rule profile.
Remote IP Group – Use the drop down list to choose one of
the destination IP group for such rule profile.
If you want to create a new IP object, simply click
to
open the following dialog.
Profile – Type a new name for such IP object.
Address Type – Choose the address type (Single or
Range) for such rule. Each type will bring different
settings for configuration.
Start IP Address - Type the IP address of the starting
point for such profile.
Vigor2960 Series User’s Guide
383
End IP Address - Type the IP address of the ending
point for such profile if you choose Range as Address
Type.
Subnet Mask – Choose the subnet mask from the drop
down list if you choose Subnet as Address Type.
Service Type
Service Type - Choose one of the service types from the
drop down list.
If you want to create a new service type, simply click
to
open the following dialog.
Profile – type a new name for such service type.
Protocol –There are two options: TCP, UDP and
TCP/UDP. Select the protocol that you want to use.
Source Port Start /End - Type the start /end number
for the port range of the source port for such filter.
Destination Port Start / End - Type the start /end
number for the port range of the destination port for
such filter.
Apply
Click it to save the configuration and exit the page.
Cancel
Click it to exit the page without saving the configuration.
4. Enter all of the settings and click Apply.
5. A QoS rule profiler has been created.
Vigor2960 Series User’s Guide
384
4
4
.
.
1
1
2
2
.
.
2
2
.
.
2
2
V
V
o
o
I
I
P
P
Q
Q
o
o
S
S
When this feature is enabled, the VoIP SIP/UDP packets will be sent with highest priority
during the process of data transmission.
Each item will be explained as follows:
Item Description
Enable
Enable - Click it to enable VoIP QoS function.
SIP UDP Port
Set a port number used for SIP.
Apply
Click it to save and exit the dialog.
Cancel
Click it to discard the settings configured in this page.
Vigor2960 Series User’s Guide
385
4
4
.
.
1
1
2
2
.
.
2
2
.
.
3
3
D
D
S
S
C
C
P
P
R
R
e
e
-
-
T
T
a
a
g
g
Packets coming from LAN IP can be retagged through QoS setting. When the packets sent
out through WAN interface, all of them will be tagged with certain header and that will be
easily to be identified by server on ISP.
Each item will be explained as follows:
Item Description
Enable
Enable – Click it to enable DSCP Re-Tag function.
High / Medium / Normal
/ Low
There are four queues allowed for QoS control. Use the drop
down list to specify the heading for each queue which will
be applied to the packets tagged.
Apply
Click it to save and exit the dialog.
Cancel
Click it to discard the settings configured in this page.
Vigor2960 Series User’s Guide
386
4
4
.
.
1
1
2
2
.
.
3
3
S
S
e
e
s
s
s
s
i
i
o
o
n
n
s
s
L
L
i
i
m
m
i
i
t
t
A PC with private IP address can access to the Internet via NAT router. The router will
generate the records of NAT sessions for such connection. The P2P (Peer to Peer)
applications (e.g., BitTorrent) always need many sessions for procession and also they will
occupy over resources which might result in important accesses impacted. To solve the
problem, you can use limit session to limit the session procession for specified Hosts.
In the Bandwidth Management menu, click Sessions Limit to open the web page.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
profile.
Delete
Remove the selected profile.
To delete a profile, simply select the one you want to delete
and click the Delete button.
Move Up
Change the order of selected profile by moving it up.
Move Down
Change the order of selected profile by moving it down.
Rename
Allow to modify the selected profile name.
Refresh
Renew current web page.
Profile
Display the name of the profile.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Limit
Display the maximum session number allowed for the
profile.
Source IP Object
Display the source IP object profile name.
Vigor2960 Series User’s Guide
387
Source IP Group
Display the source IP group profile name.
Time Object
If no time schedule is set, None will be shown in this field.
Time Group
Display the Time group profile selected for such application
profile.
Default Session Limit
Display the default session number used for each computer
in LAN.
Default Max Sessions
Display the default maximum session number used for each
computer in LAN.
Use Default Message
Enable – Use the default message to display on the page that
the user tries to access into the blocked web page..
Disable – Type the message manually to display on the page
that the user tries to access into the blocked web page.
Default Connection
Limit Administration
Message
Such field is available when you disable the function of Use
Default Message.
The message will display on the user's browser when he/she
tries to access the blocked web page.
Apply
Click it to save and exit the dialog.
Cancel
Click it to discard the settings configured in this page.
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
a
a
s
s
e
e
s
s
s
s
i
i
o
o
n
n
l
l
i
i
m
m
i
i
t
t
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Bandwidth Management>> Sessions Limit.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Vigor2960 Series User’s Guide
388
Item Description
Profile
Type the name of the profile.
Enable
Check this box to enable such profile.
Max Sessions
Defines the available session number for each host in the
specific range of IP addresses. If you do not set the session
number in this field, the system will use the default session
limit for the specific limitation you set for each index. This
field cannot be typed with “0”, otherwise the profile cannot
be saved.
general target
Time Object - Click the triangle icon
to display the
profile selection box. Choose a schedule object profile to be
applied on such rule. You can click
to create another
new time object profile.
Time Group - Click the triangle icon
to display the
profile selection box. Choose a schedule group profile to be
applied on such rule. You can click
to create another
new time group profile.
source target
Click the triangle icon
to display the profile selection
box. Choose one or more IP object/IP group/User
Profile/User Group/LDAP Group/Guest Group profiles from
the drop down list. The selected profile will be treated as
source target. You can click
to create another new
object profile.
Apply
Click it to save the configuration and exit the dialog.
Cancel
Click it to exit the dialog without saving the configuration.
4. Enter all of the settings and click Apply.
5. A session limit profile has been created.
Vigor2960 Series User’s Guide
389
4
4
.
.
1
1
2
2
.
.
4
4
B
B
a
a
n
n
d
d
w
w
i
i
d
d
t
t
h
h
L
L
i
i
m
m
i
i
t
t
The downstream or upstream from FTP, HTTP or some P2P applications will occupy large
of bandwidth and affect the applications for other programs. Please use Limit Bandwidth to
make the bandwidth usage more efficient.
In the Bandwidth Management menu, click Bandwidth Limit to open the web page.
Each item will be explained as follows:
Item Description
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
profile.
Delete
Remove the selected profile.
To delete a profile, simply select the one you want to delete
and click the Delete button.
Move Up
Change the order of selected profile by moving it up.
Move Down
Change the order of selected profile by moving it down.
Rename
Allow to modify the selected profile name.
Refresh
Renew current web page.
Profile
Display the name of the bandwidth limitation profile.
Enable
Display the status of the profile. False means disabled; True
means enabled.
RX Limit(kbps)
Display the limitation for the speed of the downstream.
TX Limit(kbps)
Display the limitation for the speed of the upstream.
Mode
Display the mode selection (Each/Shared) of the selected
profile.
Source IP Object
Display the source IP object profile name.
Vigor2960 Series User’s Guide
390
Source IP Group
Display the source IP group profile name.
Time Object
If no time schedule is set, None will be shown in this field.
Time Group
Display the Time group profile selected for such application
profile.
Allow auto
adjustment…
Check this box to make the best utilization of available
bandwidth.
Default TX/RX Limit
The default limit will apply to LAN IP(s) not in the above
configuration profiles
Default TX Limit – Define the limitation for the speed of
the upstream.
Default RX Limit –Define the limitation for the speed of the
downstream.
Enable Smart
Bandwidth Limit
Check this radio button to configure the default limitation for
bandwidth for any LAN IP not included in the Limitation
List.
Session Threshold
When session number exceeds the set threshold, Smart
Bandwidth limit will work.
TX Limit
Define the speed of the upstream for Smart Bandwidth
Limit. If you do not set the limit in this field, the system will
use the default speed for the data transmission.
RX Limit
Define the speed of the downstream for Smart Bandwidth
Limit. If you do not set the limit in this field, the system will
use the default speed for the data transmission
Apply
Click it to save and exit the dialog.
Cancel
Click it to discard the settings configured in this page.
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
a
a
b
b
a
a
n
n
d
d
w
w
i
i
d
d
t
t
h
h
l
l
i
i
m
m
i
i
t
t
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open Bandwidth Management>>Bandwidth Limit.
2. Simply click the Add button.
3. The following dialog will appear.
Vigor2960 Series User’s Guide
391
Available parameters are listed as follows:
Item Description
Profile
Type the name of the profile.
Enable
Check this box to enable such profile.
TX Limit(Kbps)
Define the limitation for the speed of the upstream. If you do
not set the limit in this field, the system will use the default
speed for the specific limitation you set for each index. Do
not type the value with “0”, otherwise the profile cannot be
saved.
RX Limit(Kbps)
Define the limitation for the speed of the downstream. If you
do not set the limit in this field, the system will use the
default speed for the specific limitation you set for each
index. Do not type the value with “0”, otherwise the profile
cannot be saved.
Mode
Select Each to make each IP within the range of Start IP and
End IP having the same speed defined in TX limit and RX
limit fields; select Shared to make all the IPs within the
range of Start IP and End IP share the speed defined in TX
limit and RX limit fields.
general target
Time Object - Click the triangle icon
to display the
profile selection box. Choose a schedule object profile to be
applied on such rule. You can click
to create another
new time object profile.
Vigor2960 Series User’s Guide
392
Time Group - Click the triangle icon
to display the
profile selection box. Choose a schedule group profile to be
applied on such rule. You can click
to create another
new time group profile.
source target
Click the triangle icon
to display the profile selection
box. Choose one or more IP object/IP group/User
Profile/User Group/LDAP Group/Guest Group profiles from
the drop down list. The selected profile will be treated as
source target. You can click
to create another new
object profile.
Service target
Click the triangle icon
to display the profile selection
box. Choose one or more Service object/Service Group
profiles from the drop down list. The selected profile will be
treated as source target. You can click
to create another
new object profile.
Apply
Click it to save the configuration and exit the dialog.
Cancel
Click it to exit the dialog without saving the configuration.
4. Enter all of the settings and click Apply.
5. A bandwidth limit profile has been created.
Vigor2960 Series User’s Guide
393
4
4
.
.
1
1
3
3
U
U
S
S
B
B
A
A
p
p
p
p
l
l
i
i
c
c
a
a
t
t
i
i
o
o
n
n
USB storage disk connected on Vigor router can be regarded as a server or WAN interface.
By way of Vigor router, clients on LAN can access, write and read data stored in USB
storage disk with different applications. After setting the configuration in USB Application,
you can type the IP address of the Vigor router and username/password created in User
Management>>User Profile on the client software. Then, the client can use the FTP site
(USB storage disk) through Vigor router.
Note: USB ports on Vigor router are allowed to connect to USB modem. Models of the
modems supported by Vigor router can be seen from USB Application>>Modem
Support List. For network connection via USB modem, refer to WAN>>General
Setup for detailed information.
4
4
.
.
1
1
3
3
.
.
1
1
D
D
i
i
s
s
k
k
S
S
t
t
a
a
t
t
u
u
s
s
This page is to monitor the status for the users who accessing into FTP server (USB storage
disk) via the Vigor router. In addition, the status of the USB modem or USB printer
connecting to Vigor router can be checked from such page.
Available settings are explained as follows:
Item Description
Refresh
Click it to refresh current USB connection status. The
result will be shown on the screen immediately.
Restart Devices
Click it to restart the USB device.
Manufacturer
Display the manufacturer of the USB device.
Vigor2960 Series User’s Guide
394
Model
Display the type of the USB device.
Size
Display the total disk capacity of the USB device.
Free Capacity
Display the remaining disk space of the USB device.
Status
Display the status of the USB device.
(Remove Icon)
At present, FAT, EXT2, EXT3 USB format can be
supported by Vigor router. If such USB is inserted into the
USB slot, the Status field will display “In Use” and the
remove icon will appear on the screen. If you want to
remove the USB disk, simply click this icon.
4
4
.
.
1
1
3
3
.
.
2
2
F
F
T
T
P
P
S
S
e
e
r
r
v
v
e
e
r
r
This page allows you to edit FTP user setting for FTP users. Any user who wants to access
into the USB storage disk must type the same username and password configured for the
user profile. Before adding or modifying settings in this page, please insert a USB storage
disk first.
At present, the Vigor router can support USB storage disk with versions of FAT16/32 and
EXT2/3 only. Therefore, before connecting the USB storage disk into the Vigor router,
please make sure the memory format for the USB storage disk is FAT16/32 or EXT2/3.
All of the profiles displayed here are created by User Management>>User Profile, with
Allow FTP Server Login enabled.
Available settings are explained as follows:
Item Description
Edit
Click it to edit the selected USB device.
Refresh
Click it to refresh current USB connection status.
User Name
It displays the username that user uses to login to the FTP
server. If there is nothing displayed here, it means there is
no FTP user profile created. Just open User
Management>>User Profile, create a new user profile
with Allow FTP Server Login enabled.
Volume
It displays the proper volume for the connected USB disk.
Vigor2960 Series User’s Guide
395
Path
It displays the directory name for the connected USB disk.
Access Rights
It displays the access right for the connected USB disk.
Enable FTP
Check the box to enable FTP server.
Port
Type required port number for FTP server. Or, use the
default value.
Maximum Number of
Connections
It means the maximum session limit for the FTP server.
The default setting is “4” for downloading, uploading and
keeping network connection.
Maximum Connection per
IP
It means the maximum session limit for the FTP server
per each IP address. For example, an IP address is used by
two FTP users for connecting network. That means there
are two sessions used for the IP and the FTP server.
The default setting is “10”.
4
4
.
.
1
1
3
3
.
.
3
3
S
S
A
A
M
M
B
B
A
A
S
S
e
e
r
r
v
v
e
e
r
r
SAMBA server offers the file sharing service for users through a specified file folder. Any
user who wants to access into the USB storage disk must type the same name and use the
same workgroup. Before adding or modifying settings in this page, please insert a USB
storage disk first.
4
4
.
.
1
1
3
3
.
.
3
3
.
.
1
1
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
This page allows you to configure settings for SAMBA server.
Available settings are explained as follows:
Item Description
Enable
Check the box to enable SAMBA server.
Name
Type the NetBios name of the SAMBA Server.
Description
Type any text to describe SMABA server.
Workgroup
Type the name of the workgroup for the SAMBA server
Vigor2960 Series User’s Guide
396
to be located by Windows system.
Default name will be offered for Windows XP user.
Enable SMBv1
For the system security, use the default setting (Disable).
SMBv1 is used for the computer with old operation
system which does not support SMBv2 or SMBv3.
4
4
.
.
1
1
3
3
.
.
3
3
.
.
2
2
S
S
A
A
M
M
B
B
A
A
F
F
o
o
l
l
d
d
e
e
r
r
Due to the file sharing feature of SAMBA server, this page allows you to create any profile
which can be shared by clients on the network.
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
/
/
e
e
d
d
i
i
t
t
a
a
S
S
M
M
A
A
B
B
A
A
f
f
o
o
l
l
d
d
e
e
r
r
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open USB Application>>SMABA Server and click SAMBA Folder tab.
2. Click the Add button. For an existed profile, simply choose that profile and click the
Edit button.
3. The following dialog will appear.
Available parameters are listed as follows:
Vigor2960 Series User’s Guide
397
Item Description
Profile
Type the name of the profile to be shared.
Enable
Check this box to enable such profile.
Visible
Check this box to make such profile be seen by users. If not,
the user must know and type the path of the folder name to
access into that folder.
Comment
Type any text to describe such profile if required.
Volume
Use the drop down list to specify the proper volume for the
connected USB disk.
Path
It indicates the directory name for the connected USB disk.
The default setting is “/”.
Access
There are three options for you to specify.
All Users Read-only – Such option allows all of the users
sharing the SAMBA service to read the file stored under the
sharing folder.
All Users Read-Write – Such option allows all of the users
sharing the SAMBA service to read and write the file stored
under the sharing folder.
If Specific Users is selected, you have to additionally
specify Read-Only User and Read-Write User.
Read-Only User – User profiles (with Allow SAMBA
Server Login Enabled) created under User
Management>>User Profile will be displayed here.
Choose the one to have the right to read the file on
SAMBA folder.
Read-Write User - User profiles (with Allow SAMBA
Server Login Enabled) created under User
Management>>User Profile will be displayed here.
Choose the one to have the right to read and write the
file on SAMBA folder.
Apply
Click it to save the configuration and exit the dialog.
Cancel
Click it to exit the dialog without saving the configuration.
4. Enter all of the settings and click Apply.
5. A folder profile has been created.
Vigor2960 Series User’s Guide
398
4
4
.
.
1
1
3
3
.
.
4
4
P
P
r
r
i
i
n
n
t
t
e
e
r
r
This page is used to enable the printer server state when a printer device is connected via
USB port.
Available settings are explained as follows:
Item Description
Printer Server State
Auto- It’s the default setting. Vigor router will detect if
the connected device is printer or not. If yes, the printer
server will be enabled automatically to activate the
printer.
Enable – The printer server will be enabled.
Disable – The printer server will be disabled.
Apply
Click it to save the configuration.
Cancel
Click it to return to factory default setting.
Vigor2960 Series User’s Guide
399
4
4
.
.
1
1
3
3
.
.
5
5
T
T
e
e
m
m
p
p
e
e
r
r
a
a
t
t
u
u
r
r
e
e
S
S
e
e
n
n
s
s
o
o
r
r
A USB Thermometer is now available that complements your installed DrayTek router
installations that will help you monitor the server or data communications room environment
and notify you if the server room or data communications room is overheating.
During summer in particular, it is important to ensure that your server or data
communications equipment are not overheating due to cooling system failures.
The inclusion of a USB thermometer in compatible Vigor routers will continuously monitor
the temperature of its environment. When a pre-determined threshold is reached you will be
alerted by either an email or SMS so you can undertake appropriate action.
4
4
.
.
1
1
3
3
.
.
5
5
.
.
1
1
T
T
e
e
m
m
p
p
e
e
r
r
a
a
t
t
u
u
r
r
e
e
G
G
r
r
a
a
p
p
h
h
Below shows an example of temperature graph:
Vigor2960 Series User’s Guide
400
4
4
.
.
1
1
3
3
.
.
5
5
.
.
2
2
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
Available settings are explained as follows:
Item Description
Enable Temperature
Sensor
Check this box to enable such function.
Display Unit
Choose Celsius or Fahrenheit as the display unit.
Temperature Alert Lower
limit / Temperature Alert
Upper limit
Type the upper limit and lower limit for the system to
send out temperature alert.
Calibration
Type a value used for correcting the temperature error.
Temperature Alert Time
Interval
The default setting is one minute. That means, the
temperature alert will be sent per minute.
Apply
Click it to save the configuration and exit the dialog.
Cancel
Click it to exit the dialog without saving the configuration.
Enter all of the settings and click Apply.
Vigor2960 Series User’s Guide
401
4
4
.
.
1
1
3
3
.
.
6
6
M
M
o
o
d
d
e
e
m
m
S
S
u
u
p
p
p
p
o
o
r
r
t
t
L
L
i
i
s
s
t
t
Such page provides the information about the brand name and model name of the USB
modems which are supported by Vigor router.
Vigor2960 Series User’s Guide
402
4
4
.
.
1
1
4
4
S
S
y
y
s
s
t
t
e
e
m
m
M
M
a
a
i
i
n
n
t
t
e
e
n
n
a
a
n
n
c
c
e
e
For the system setup, there are several items that you have to know the way of configuration:
Status, Administrator Password, Configuration Backup, Syslog/Mail Alert, Time and Date,
Access Control, SNMP Setup, Reboot System, Firmware Upgrade and APP Signature
Upgrade.
Below shows the menu items for System Maintenance.
4
4
.
.
1
1
4
4
.
.
1
1
T
T
R
R
-
-
0
0
6
6
9
9
4
4
.
.
1
1
4
4
.
.
1
1
.
.
1
1
T
T
R
R
-
-
0
0
6
6
9
9
This device supports TR-069 standard. Parameters in this page are used for the administrator
to manage a TR-069 device (Vigor router, AP and etc.) through VigorACS SI (
Auto
Configuration Server).
Available settings are listed as follows:
Item Description
Enable
Check this box to enable such profile.
Vigor2960 Series User’s Guide
403
ACS server on
Choose one of the WAN/LAN profiles which will be
recognized by VigorACS.
Auto Failover to Active
WANs
Specify the WAN interface to take over the job of network
connection when the original WAN interface fails.
ACS Server URL/
ACS Server Username /
ACS Server Password
Such data must be typed according to the ACS (Auto
Configuration Server) you want to link. Please refer to Auto
Configuration Server user’s manual for detailed information.
Last Inform Response
Time
Display the response time informed by VigorACS.
ACS Connection Status
When it lights in green, it means the router has been detected
and can be managed by VigorACS.
CPE Protocol
Select HTTP or HTTPs for the router to communicate with
VigorACS.
Port
Type the port number for Vigor2960 which will be
recognized by VigorACS.
CPE URL
Display the URL of such CPE.
CPE Username
Type the user name for the CPE which will be used by the
administrator of VigorACS to log into the WUI of
Vigor2960.
CPE Password
Type the password for the CPE which will be used by the
administrator of VigorACS to log into the WUI of
Vigor2960.
Turn on log message to
syslog
The default setting Disable. Click Enable to make the log
message being recorded by Syslog.
Periodic Status
The default setting is Enable. Please set periodic time for
VigorACS to send notification to CPE. Or click Disable to
close the mechanism of notification.
Periodic Time
Set the time for VigorACS to send notification to CPE.
Enable STUN
Enable/Disable - The default is Disable. If you click
Enable, please type the relational settings listed below:
Server Address – Type the IP address of the STUN server.
Server Port – Type the port number of the STUN server.
Minimum Keep Alive Period – If STUN is enabled, the
CPE must send binding request to the server for the purpose
of maintaining the binding in the Gateway. Please type a
number as the minimum period. The default setting is “60
seconds”.
Maximum Keep Alive Period – If STUN is enabled, the
CPE must send binding request to the server for the purpose
of maintaining the binding in the Gateway. Please type a
number as the maximum period. A value of “-1” indicates
that no maximum period is specified.
Apply
Click it to save the configuration.
Cancel
Click it to discard the settings configured in this page.
Enter all of the settings and click Apply.
Vigor2960 Series User’s Guide
404
4
4
.
.
1
1
4
4
.
.
1
1
.
.
2
2
A
A
p
p
p
p
l
l
y
y
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
t
t
o
o
V
V
i
i
g
g
o
o
r
r
A
A
P
P
This feature is able to apply TR-069 settings (including STUN and ACS server settings) to
all of APs managed by Vigor2960 at the same time.
Item Description
Apply Settings to APs
Check this box to make the settings in this page apply to
VigorAP.
AP Password
Type the password of the VigorAP that you want to apply
Vigor2960’s TR-069 settings.
Apply Specific STUN
Settings to APs
After clicking the Enable radio button for Apply Settings to
APs, if you want to apply specific STUN settings (not the
STUN Settings configured for Vigor2925) to VigorAPs to
meet specific requirements, simply check this box. Then,
type the server IP address, server port, minimum keep alive
period and maximum keep alive period respectively.
Minimum Keep Alive
Period
If STUN is enabled, the CPE must send binding request to
the server for the purpose of maintaining the binding in the
Gateway. Please type a number as the minimum period. The
default setting is “60 seconds”.
Maximum Keep Alive
Period
If STUN is enabled, the CPE must send binding request to
the server for the purpose of maintaining the binding in the
Gateway. Please type a number as the maximum period. A
value of “-1” indicates that no maximum period is specified.
Apply
Click it to save the configuration.
Cancel
Click it to discard the settings configured in this page.
Vigor2960 Series User’s Guide
405
4
4
.
.
1
1
4
4
.
.
2
2
A
A
d
d
m
m
i
i
n
n
i
i
s
s
t
t
r
r
a
a
t
t
o
o
r
r
P
P
a
a
s
s
s
s
w
w
o
o
r
r
d
d
This page allows you to set new password for accessing into the WUI of the router.
Each item will be explained as follows:
Item Description
Original Password
Type the old password.
New Password
Type the new password.
Confirm Password
Re-type the new password for confirmation.
Apply
Click this button to save the configuration and exit the web
page.
Enter all of the settings and click Apply.
Vigor2960 Series User’s Guide
406
4
4
.
.
1
1
4
4
.
.
3
3
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
B
B
a
a
c
c
k
k
u
u
p
p
Most of the settings can be saved locally as a configuration file, and can be applied to
another router. The router supports functions of restore and backup for the configuration
file.
4
4
.
.
1
1
4
4
.
.
3
3
.
.
1
1
B
B
a
a
c
c
k
k
u
u
p
p
This page allows you to set general settings (e.g., encryption mode, backup type, config file
name) for configuration backup.
Each item will be explained as follows:
Item Description
Encrypt
None – No encryption will be used.
Encrypt Config File – Choose it to encrypt the whole
configuration file.
Password – Type a password for encrypting the file.
Confirm Password – Retype the password for
confirmation.
Encode Password in Config – Choose it to encrypt the
password information in configuration file.
Backup Type
Choose one of the types to determine where the file will be
stored.
Backup to Local File – The configuration file will be stored
in local host.
Backup to Remote TFTP Server – The configuration file
will be stored in the remote TFTP server specified.
Remote Server IP – Type the IP address of the remote
server.
Vigor2960 Series User’s Guide
407
Backup Selected Config – The configuration file will be
stored with an existing file in local host. You must select
which file you want to store.
Select Config File – Choose and check which type(s)
of configuration will be saved.
Select Lang File – Choose and check which
language(s) to be saved.
Config File Name
The default configuration file name (file format shall be .tgz)
will be shown here. You can change the name if required.
Backup
Execute the file downloading job to the computer.
4
4
.
.
1
1
4
4
.
.
3
3
.
.
2
2
A
A
u
u
t
t
o
o
B
B
a
a
c
c
k
k
u
u
p
p
The configuration can be stored to Vigor router as a backup file. Such page can set
conditions for Vigor router to perform configuration backup automatically
.
Each item will be explained as follows:
Item Description
Enable
Check it to enable Auto Backup function.
Automatic backup
interval
Specify the type of backup interval for the system to perform
configuration backup automatically.
Daily – Configuration backup will be performed everday.
Weekly – Configuration backup will be performed per week.
Monthly – Configuration backup will be performed per
month.
date_weekday
It is available when Weekly is selected as Automatic backup
interval.
Use the drop down list to choose one day.
date_day
It is available when Monthly is selected as Automatic
backup interval.
Enter a number (1 to 31) to represent the day within a month.
backup time in a day
It is available when Weekly / Daily is selected as Automatic
Vigor2960 Series User’s Guide
408
backup interval.
Set the time interval by entering “hh:mm” (hours:minutes).
Only backup when
config changed
Enable – Click it to enable such function. Then, backup will
be executed whenever the configuration is changed.
Disable – The backup will be executed periodically based on
the conditions set above.
Backup config file
The records of configuration backup files will be shown in
this table.
Apply
Click this button to save the settings configured in this page.
Cancel
Click this button to discard the settings configured in this
page.
4
4
.
.
1
1
4
4
.
.
3
3
.
.
3
3
R
R
e
e
s
s
t
t
o
o
r
r
e
e
Each item will be explained as follows:
Item Description
Decrypt Config
Check this box to decrypt an encrypted configuration file.
You can specify a password for decrypting the file for
restoring it for use next time.
Password – Type a password for encrypting the file.
Confirm Password – Retype the password for
confirmation.
Restore Type
Choose one of the types to determine where the file will be
downloaded from.
Vigor2960 Series User’s Guide
409
Restore Settings via Local Config File – Click it to restore
the configuration settings through a configuration file stored
locally.
Restore Settings via TFTP Server – Click it to restore the
configuration settings through TFTP server.
Remote Server IP – Type the IP address of the TFTP
server.
Config File Name – Type the configuration file name
to be restored.
Select File
Use the Browse... button to locate the file for uploading to
the router.
Restore
Click it to upload the selected file to the router. After
finishing the restoration, the system will ask you to reboot
the router.
4
4
.
.
1
1
5
5
.
.
3
3
.
.
4
4
A
A
n
n
a
a
l
l
y
y
s
s
i
i
s
s
Such analysis page will show user defined settings result. In comparing the default settings
with information displayed in this page, it will be convenient for administrator, user or RD
member for debug possible error.
Vigor2960 Series User’s Guide
410
4
4
.
.
1
1
4
4
.
.
4
4
S
S
y
y
s
s
l
l
o
o
g
g
/
/
M
M
a
a
i
i
l
l
A
A
l
l
e
e
r
r
t
t
SysLog function is provided for users to monitor router. There is no bother to directly get
into the Web User Interface of the router or borrow debug equipments.
4
4
.
.
1
1
4
4
.
.
4
4
.
.
1
1
S
S
y
y
s
s
L
L
o
o
g
g
F
F
i
i
l
l
e
e
This page displays all the operation logs for the router.
Available parameters are listed as follows:
Item Description
Refresh
Renew the web page.
Download Log
Save or open the Syslog file.
Clear Syslog
Remove all of the records.
Auto Refresh
Specify the interval of refresh time to obtain the latest status.
The information will update immediately when the Refresh
button is clicked.
4
4
.
.
1
1
4
4
.
.
4
4
.
.
2
2
S
S
y
y
s
s
l
l
o
o
g
g
A
A
c
c
c
c
e
e
s
s
s
s
S
S
e
e
t
t
u
u
p
p
To configure settings for Syslog, open System Maintenance>>Syslog/Mail Alert and click
the Syslog Access Setup tab.
Vigor2960 Series User’s Guide
411
Available parameters are listed as follows:
Item Description
Status
Choose one of the selections to determine current status for
Syslog access. If you choose Local as Status, you don’t need
to type any server IP and port. Just give a name for the
router.
Save to USB
Such option is available when Remote/Local/Both is
selected in Status.
Enable – Click it to save the log onto USB disk.
Disable – Click it to disable the function of log to USB.
USB Syslog Keep Days – Type the days that USB disk will
keep the log without deleting.
Router Name
Type the name of the router. The default name is Vigor.
Server IP/Host Name
Such option is available when Remote/Both is selected in
Status. Type the IP address or host name of the Syslog
server.
It is available when Remote or Both is selected as Status.
Server Port
Such option is available when Remote/Both is selected in
Status. Type the port number for the Syslog server.
It is available when Remote or Both is selected as Status.
Firewall Log
Click Enable to make the firewall log recorded in the
Syslog.
VPN Log
Click Enable to make the VPN log recorded in the Syslog.
User Access Log
Click Enable to make the user access log recorded in the
Vigor2960 Series User’s Guide
412
Syslog.
WAN Log
Click Enable to make the WAN log recorded in the Syslog.
Others Log
Click Enable to make other logs recorded in the Syslog.
Apply
Click this button to save the configuration and exit the web
page.
Cancel
Click it to discard the settings configured in this page.
Enter all of the settings and click Apply.
4
4
.
.
1
1
4
4
.
.
4
4
.
.
3
3
M
M
a
a
i
i
l
l
A
A
l
l
e
e
r
r
t
t
Available parameters are listed as follows:
Item Description
Enable
Check the box to enable such profile.
Mail From
Type a mail address for the mail sender.
Mail To
Assign a mail address for the mail receiver.
Add – Click this button to display a field for adding e-mail
address.
Save – After finished the address configuration, click Save to
save the setting onto the router.
SMTP Port
Type the port number for SMTP server.
SMTP Server
Type the IP address for SMTP server.
Connection Security
Choose SSL/TLS or StartTLS to activate corresponding
server.
Authentication
Click Enable to make any user logging into the mail server.
If you click Enable, you have to type user name and user
password on the below fields.
User Name – Type the user name for authentication.
User Password – Type the password for authentication.
User Access Mail Alert
Enable – Vigor router sends a mail as an alert if it detects
Vigor2960 Series User’s Guide
413
any user access event.
Disable – Vigor router does not send any mail to inform the
user login event.
VPN Mail Alert
Enable – Vigor router sends a mail as an alert to inform VPN
connection.
Disable – Vigor router does not send any mail to inform
VPN connection.
Send A Test Mail
Click it to send a test mail to the specified address.
Apply
Click this button to save the configuration and exit the web
page.
Cancel
Click it to discard the settings configured in this page.
Enter all of the settings and click Apply.
4
4
.
.
1
1
4
4
.
.
5
5
T
T
i
i
m
m
e
e
a
a
n
n
d
d
D
D
a
a
t
t
e
e
This page allows you to specify where the time of the router should be inquired from.
As an NTP (Network Time Protocol) client, the router gets standard time from the time
server. Some time-based functions cannot work properly until the system time functions run
successfully. Typically, NTP achieves high accuracy and reliability with multiple redundant
servers and diverse network paths.
Available parameters are listed as follows:
Item Description
Current System Time
Click Inquire Time to get the current time.
Time Type
NTP – Select to inquire time information from Time Server
on the Internet using assigned protocol.
Browser – Select this option to use the browser time from
the remote administrator PC host as router’s system time.
Server
Type the domain name of the server.
Port
Type the port number for the time server.
Vigor2960 Series User’s Guide
414
Interval
Select a time interval for updating from the NTP server.
Time Zone
Select the time zone where the router is located.
Daylight Saving
Click Enable to enable the daylight saving. Such feature is
available for certain area.
Apply
Click this button to save the configuration and exit the web
page.
Cancel
Click it to discard the settings configured in this page.
Enter all of the settings and click Apply.
4
4
.
.
1
1
4
4
.
.
6
6
A
A
c
c
c
c
e
e
s
s
s
s
C
C
o
o
n
n
t
t
r
r
o
o
l
l
4
4
.
.
1
1
4
4
.
.
6
6
.
.
1
1
A
A
c
c
c
c
e
e
s
s
s
s
C
C
o
o
n
n
t
t
r
r
o
o
l
l
This page allows you to open or close the web user interface of Vigor2960 by using Telnet,
SSH, HTTP, HTTPS… and etc…
Available parameters are listed as follows:
Item Description
Default: Disable
Auto-Logout
Enable – Vigor router will auto logout based on the
specified time setting (e.g., 1, 3, 5 and 10 minutes).
Disable – Default setting. The function of Auto-Logout will
be disabled.
Use Validation Code
Enable – While accessing into the web user interface of
Vigor router, a validation code will appear to authenticate
the user trying to log into web user interface.
Fail Times to Trigger – The number selected here
means the times for login failure that will trigger
Validation Code for authentication. The default setting
is “0”. That means no failure of login is allowed.
Disable – No validation will be done when a user tries to log
into the web user interface of Vigor router.
Customized Login
Enable – Click it to customize the background image of the
Vigor2960 Series User’s Guide
415
Image
login dialog.
Upload Login Image – Specify an image file by
pressing the Select button.
Disable – Click it to disable the function of customized login
image. The default background image will be used
automatically.
Enforce HTTPS
Management
Click Enable to force the user accessing into web user
interface of Vigor router by HTTPS.
Internet Access Control
Apply to WAN Interface
Check the interface(s) for Internet Access. Any user can
access into Internet via Vigor2960 through the interface
specified here.
Web Allow
Click Enable to allow system administrator to login from the
Internet and management the web page of the router.
Telnet Allow
Click Enable to allow system administrator access Telnet
server.
SSH Allow
Click Enable to allow system administrator access SSH
server.
HTTPS Allow
Click Enable to allow system administrator to login from the
HTTPS server and management the web page of the router.
SSL Proxy Allow
Click Enable to allow SSL Proxy user to login SSL Proxy
Service.
FTP Allow
Click Enable to allow system administrator access FTP
server.
SAMBA Allow
Click Enable to allow the users (with SAMBA function
enabled) login into the SAMBA server through Vigor router.
TR069 Allow
Click Enable to allow Vigor router to be managed by
VigorACS via WAN connection.
Server Certificate
Use the default setting.
Access List
Click Enable to allow system administrator to login from the
user defined IP address and management the web page of the
router. If you enable such function, the system can be
managed by these three IP addresses via WAN.
IP List
Type the first IP address for the system administrator to
login.
The former boxes indicate the IP address allowed to login to
the router, and the later box indicates a subnet mask allowed
to login to the router.
Allow Ping from WAN
Click Enable to allow system administrator to ping the router
from WAN interface.
LAN Access Control
Allow management from
LAN
Click Enable to control such router from LAN.
Apply to LAN Subnet
Choose the LAN profile(s) that the IPs controlled under such
Vigor2960 Series User’s Guide
416
profile are allowed to access into the web user interface of
Vigor2960.
Web Allow
Click Enable to allow system administrator to login from the
Internet and management the web page of the router.
Telnet Allow
Click Enable to allow system administrator access Telnet
server.
SSH Allow
Click Enable to allow system administrator access SSH
server.
HTTPS Allow
Click Enable to allow system administrator to login from the
HTTPS server and management the web page of the router.
SSL Proxy Allow
Click Enable to allow SSL Proxy user to login SSL Proxy
Service.
FTP Allow
Click Enable to allow system administrator access FTP
server.
SAMBA Allow
Click Enable to allow the users (with SAMBA function
enabled) login into the SAMBA server through Vigor router.
TR069 Allow
Click Enable to allow Vigor router to be managed by
VigorACS via LAN connection
Allow Ping form LAN
Click Enable to allow system administrator to ping the router
from LAN interface.
Management Port Setup
Web Port
Type the port number for the management through web
page.
Telnet Port
Type the port number for the management through telnet
page.
SSH Port
Type the port number for the management through SSH
server.
HTTPS Port
Type the port number for the management through HTTPS
server.
SSL Proxy Port
Type the port number for the SSL Proxy service.
SSL VPN Port
Type the port number for the management through SSL VPN
server.
FTP Port
Type the port number for the management through FTP
server.
Apply
Click this button to save the configuration and exit the web
page.
Cancel
Click it to discard the settings configured in this page.
Enter all of the settings and click Apply.
4
4
.
.
1
1
4
4
.
.
6
6
.
.
2
2
F
F
a
a
i
i
l
l
t
t
o
o
B
B
a
a
n
n
When someone tries/fails to login the router many times, Vigor router system will block the
network connection for a while to protect system. At present, five protocols (Web User
Vigor2960 Series User’s Guide
417
Interface, SSH, FTP, Telnet, PPTP/SSL) are available for configuration to avoid malicious
attacks.
Available parameters are listed as follows:
Item Description
Enable Fail to Ban
Enable the function to protect Vigor system while being
attacked by malicious accounts and passwords.
Web UI/SSH/FTP/
TELNET/PPTP/SSL
Enable – Enable the function of Fail to Ban via different
protocols (Web UI/SSH/FTP/TELNET/PPTP/SSL).
Login Max-failed Times – The number typed here
means the maximum logging times allowed for a group of
user account and password trying to login Vigor router.
Penalty Time – This field is used to configure the
blocking time. The default setting is 60 seconds. It
means, when a user tries to login Vigor router with a user
account for many times (defined in Login Max-failed
Times) but fails, he/she will be prohibited to login for a
period of time. When the penalty time limit is up, he/she
is allowed to login into Vigor router again.
Disable - Disable the function of Fail to Ban for Web
UI/SSH/FTP/TELNET/PPTP/SSL.
Apply
Click this button to save the configuration.
Cancel
Click it to discard the settings configured in this page.
4
4
.
.
1
1
4
4
.
.
6
6
.
.
3
3
A
A
c
c
c
c
e
e
s
s
s
s
B
B
a
a
r
r
r
r
i
i
e
e
r
r
This page is used to configure the access barrier to protect the system from brute-force attack
and flooding attack, and ensure following protocols can run properly.
Vigor2960 Series User’s Guide
418
Available parameters are listed as follows:
Item Description
Syslog
Check the box to make information related to access control
recorded on Syslog.
PPTP/IPsec/Web/HTTPS
SSH/Telnet/FTP Access
Barrier
The port number used by these protocols always became the
target attacked by hacker. Therefore, the settings for packet
reception rate for certain protocol can be configured to avoid
attack from unknown people.
Apply
Click this button to save the configuration.
Cancel
Click it to discard the settings configured in this page.
Vigor2960 Series User’s Guide
419
4
4
.
.
1
1
4
4
.
.
7
7
S
S
N
N
M
M
P
P
S
S
e
e
t
t
u
u
p
p
This page allows you to manage the settings for SNMP setup.
The SNMPv3 is more secure than SNMP through the encryption method (support AES and
DES) and authentication method (support MD5 and SHA) for the management needs.
Available parameters are listed as follows:
Item Description
Enable
Check the box to enable such profile.
Get Community
Set the name for getting community by typing a proper
character. The default setting is public.
Set Community
Set community by typing a proper name. The default setting
is private.
Default Host IP/Mask
Click Enable to use the default IP and mask of the host as
the SNMP agent.
Manager Host IP/Mask
If you click Disable as Default Host IP/Mask, you need to
type the IP address and choose the mask manually in these
fields.
Notification Host IP
Type the IP address of the host for notification.
Enable SNMPV3
Click Enable to enable this function.
USM User
USM means user-based security mode.
Type a username which will be used for authentication. The
maximum length of the text is limited to 23 characters.
Auth Algorithm
Choose one of the encryption methods listed below as the
authentication algorithm.
Auth Password (Min.
Length:8)
Type a password for authentication. The maximum length of
the text is limited to 23 characters.
Privacy Algorithm
Choose one of the methods listed below as the privacy
algorithm.
Vigor2960 Series User’s Guide
420
Privacy Password(Min.
Length:8)
Type a password for privacy. The maximum length of the
text is limited to 23 characters.
Apply
Click this button to save the configuration and exit the web
page.
Cancel
Click it to discard the settings configured in this page.
Enter all of the settings and click Apply.
4
4
.
.
1
1
4
4
.
.
8
8
R
R
e
e
b
b
o
o
o
o
t
t
S
S
y
y
s
s
t
t
e
e
m
m
The Vigor router system can be restarted from a Web browser. You have to reboot the router
to invoke the configured settings that you made before.
4
4
.
.
1
1
4
4
.
.
8
8
.
.
1
1
R
R
e
e
b
b
o
o
o
o
t
t
S
S
y
y
s
s
t
t
e
e
m
m
If you want to reboot the router using the current configuration, choose Reboot with
Current Configurations and click Reboot. To reset the router settings to default values,
click Reboot with Factory Default Configurations and click Reboot. The router will take
a period of time to reboot the system.
Open System Maintenance>> Reboot System.
Available parameters are listed as follows:
Item Description
Reboot with
Current
Configurations
Click it to reboot the router using the current configuration. Then,
click Reboot.
Reboot with
Factory Default
Configurations
Click it to reset the router settings to default values. Then, click
Reboot.
Clear All Certificate Files – In general, the factory default
configurations for Vigor2960 do not include certificate files.
Therefore, even if the router reboots with default settings, all of the
certificate files will be kept unless such option is enabled.
Reboot with
Customized
Click it to reboot the router using the current configuration (only the
configuration settings listed and selected below). If you choose this
Vigor2960 Series User’s Guide
421
Configurations
option, Select Config File will be available for you to select.
After choosing the configuration files, click Reboot.
Reboot
Click this button to execute the rebooting job.
4
4
.
.
1
1
4
4
.
.
8
8
.
.
2
2
S
S
c
c
h
h
e
e
d
d
u
u
l
l
e
e
R
R
e
e
b
b
o
o
o
o
t
t
Vigor router can be rebooted based on schedule setting. Check the box of Enable Schedule
Reboot and choose a time object from the drop down list of Schedule Time Object. After
clicking Apply, Vigor router will reboot at the specified time.
Available parameters are listed as follows:
Item Description
Enable Schedule Reboot
Check the box to enable such option.
Schedule Time Object
Use the drop down list to choose one of the time objects to
perform the schedule reboot.
Add
Add a new profile.
Edit
Modify the selected profile.
To edit a profile, simply select the one you want to modify
and click the Edit button. The edit window will appear for
you to modify the corresponding settings for the selected
profile.
Vigor2960 Series User’s Guide
422
Delete
Remove the selected profile.
To delete a rule, simply select the one you want to delete and
click the Delete button.
Refresh
Renew current web page.
Profile
Display the name of the schedule profile.
Frequency
Display the type (Once or Weekdays) of frequency selected
for the profile.
Start Date
Display the starting date of the profile.
Start Time
Display the starting time of the profile.
End Date
Display the ending date of the profile.
End Time
Display the ending time of the profile.
Weekdays
Display which day in a week shall perform the reboot job.
Usually, you have to configure required time object from Objects Setting>>Time Object
before choosing it for applying. If you do not create any time object previously, you can also
create a required one in this page directly. The bottom of this page offers tools for you to
create time object. The way of configuration is the same as settings in Objects
Setting>>Time Object.
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
a
a
s
s
c
c
h
h
e
e
d
d
u
u
l
l
e
e
p
p
r
r
o
o
f
f
i
i
l
l
e
e
1. Open System Maintenance>>Schedule Reboot.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the profile.
Vigor2960 Series User’s Guide
423
Frequency
Specify how often the schedule will be applied.
Once -The schedule will be applied just once
Weekdays -Specify which days in one week should perform
the schedule.
Start Date
Specify the starting date of the schedule.
Start Time
Specify the starting time of the schedule.
End Date
Specify the ending date of the schedule.
End Time
Specify the ending time of the schedule.
4. Enter all the settings and click Apply.
5. A schedule profile has been created.
Vigor2960 Series User’s Guide
424
4
4
.
.
1
1
4
4
.
.
9
9
F
F
i
i
r
r
m
m
w
w
a
a
r
r
e
e
U
U
p
p
g
g
r
r
a
a
d
d
e
e
The following web page will guide you to upgrade firmware by using such page.
Download the newest firmware from DrayTek's web site or FTP site. The DrayTek web site
is www.DrayTek.com (or local DrayTek's web site) and FTP site is ftp.DrayTek.com.
Click System Maintenance>> Firmware Upgrade.
4
4
.
.
1
1
4
4
.
.
9
9
.
.
1
1
U
U
p
p
g
g
r
r
a
a
d
d
e
e
F
F
i
i
r
r
m
m
w
w
a
a
r
r
e
e
This page display current firmware version used in Vigor router. In addition, it allows you to
select the newest firmware version manually and update to such Vigor router immediately.
A user must connect to website (http://www.draytek.com.tw/ftp) previously to download the
newest firmware to the computer.
Available parameters are listed as follows:
Item Description
Current Firmware
Version
Display current version of the firmware.
Select File
Use the Select button to locate and select the new firmware.
Upgrade
Click it to perform the firmware upgrade.
Vigor2960 Series User’s Guide
425
4
4
.
.
1
1
4
4
.
.
9
9
.
.
2
2
A
A
u
u
t
t
o
o
F
F
i
i
r
r
m
m
w
w
a
a
r
r
e
e
U
U
p
p
g
g
r
r
a
a
d
d
e
e
By clicking Check Update/Install Update, Vigor router can download/upgrade firmware
directly from website (http://www.draytek.com.tw/ftp) automatically.
Available parameters are listed as follows:
Item Description
Current Firmware
Version
Display the firmware version used currently by such model.
Server Firmware
Version
Display the firmware version shown on website
(http://www.draytek.com.tw/ftp).
Upgrade from Server
Check Update –Vigor router will inquire to website
(http://www.draytek.com.tw/ftp) if there is any newest
firmware available for use. If yes, Vigor router will
download the newest firmware from the website to the host
(Vigor router) automatically.
Install Update –If the firmware version stored on the
website (http://www.draytek.com.tw/ftp) is newer than the
version used by the host (Vigor router), then Vigor router
will download and install the newest firmware version
automatically.
Notify me when new firmware is available – If it is
enabled, after detecting the newest firmware from the
website, Vigor router’s system will automatically download
(but not install) the firmware and store on the host. Later,
when the user logs into the router’s web user interface, the
system will give a hint to notify the user in the logging
window.
Vigor2960 Series User’s Guide
426
4
4
.
.
1
1
4
4
.
.
9
9
.
.
3
3
F
F
i
i
r
r
m
m
w
w
a
a
r
r
e
e
P
P
a
a
t
t
c
c
h
h
Vigor router administrator/user can manually select file (.pat) to fix/modify the mistakes,
bugs or error occurred on current firmware. Usually, such firmware with instant
modifications can be obtained from DrayTek MyVigor Patch Server.
4
4
.
.
1
1
4
4
.
.
9
9
.
.
4
4
A
A
u
u
t
t
o
o
F
F
i
i
r
r
m
m
w
w
a
a
r
r
e
e
P
P
a
a
t
t
c
c
h
h
Vigor router system will automatically download newest firmware with the modifications
from DrayTek MyVigor Patch Server automatically to modify/fix the mistakes or error
occurred on current firmware.
Available parameters are listed as follows:
Item Description
Current Patch Version
Display the installed patch version on local system
Server Patch Version
Display the latest patch version on DrayTek MyVigor server.
Server Patch
Information
Display detailed patch information.
Upgrade from Server
Check Update – Click the button to let the system check
Vigor2960 Series User’s Guide
427
and get server patch version.
Install Update – Click it to install the server patch version
onto Vigor router.
Mode
There are three modes available for you to choose.
Manual upgrade – If it is selected, check and installation
for patch will be executed only when Check Update/Install
Update is pressed.
Notify me when new patch is available - If it is specified,
after detecting the newest patch from MyVigor server, Vigor
router’s system will automatically download the patch
information and store on the host. Later, when the user logs
into the router’s web user interface, the system will give a
hint to notify the user in the logging window.
Auto upgrade when new patch is available - If the patch
information stored on MyVigor server is newer than
information stored in the host (Vigor router), then Vigor
router will download and upgrade the newest information
automatically.
Server
Use the drop down list to specify a suitable server.
Syslog
Check the box to store the patch log into Syslog.
Patch Log
This area will show log related to firmware patch
automatically if firmware patch is executed.
Vigor2960 Series User’s Guide
428
4
4
.
.
1
1
4
4
.
.
1
1
0
0
A
A
P
P
P
P
S
S
i
i
g
g
n
n
a
a
t
t
u
u
r
r
e
e
U
U
p
p
g
g
r
r
a
a
d
d
e
e
The APP object profile adopted by Vigor router will be treated as the APP signature.
DrayTek will periodically upgrade versions for all of the APPs supported by Vigor router.
However, it might be inconvenient for users to upgrade the APP version one by one. This
feature is specially designed to offer a quick method to execute APP version upgrade. Users
can perform the APP signature upgrade manually or configure the settings on this page to
make Vigor router performing the APP signature automatically.
4
4
.
.
1
1
4
4
.
.
1
1
0
0
.
.
1
1
A
A
P
P
P
P
S
S
i
i
g
g
n
n
a
a
t
t
u
u
r
r
e
e
U
U
p
p
g
g
r
r
a
a
d
d
e
e
Before upgrading APP signature to Vigor2960, open this page and specify a signature file by
clicking Select. Later, click Upgrade to execute signature upgrade.
4
4
.
.
1
1
4
4
.
.
1
1
0
0
.
.
2
2
A
A
u
u
t
t
o
o
A
A
P
P
P
P
S
S
i
i
g
g
n
n
a
a
t
t
u
u
r
r
e
e
U
U
p
p
g
g
r
r
a
a
d
d
e
e
This page allows Vigor router to execute signature upgrade automatically.
Available parameters are listed as follows:
Item Description
Current Signature Date
Display the date of current signature installed on Vigor2960.
Vigor2960 Series User’s Guide
429
Server Signature Date
Display the newest signature version recorded on server
(myvigor.draytek.com or myvigoreu.draytek.com).
Upgrade from Server
Get the newest signature from MyVigor server
(myvigor.draytek.com or myvigoreu.draytek.com).
Check Update –Vigor router will inquire to MyVigor server
(myvigor.draytek.com or myvigoreu.draytek.com) if there is
any newest signature available for use. If yes, Vigor router
will download the newest signature from the website to the
host (Vigor router) automatically.
Install Update –If the signature information stored on
MyVigor server (myvigor.draytek.com
or myvigoreu.draytek.com) is newer than the version used by
the host (Vigor router), then the system will install the
newest signature version information automatically.
Mode
Choose the condition to execute APP signature upgrade or
send a notification.
Manual upgrade – If it is selected, check and installation
for signature will be executed only when Check
Update/Install Update is pressed.
Notify me when new signature is available - If it is
specified, after detecting the newest signature from MyVigor
server, Vigor router’s system will automatically download
the signature information and store on the host. Later, when
the user logs into the router’s web user interface, the system
will give a hint to notify the user in the logging window.
Auto upgrade when new signature is available - If the
signature information stored on MyVigor server is newer
than information stored in the host (Vigor router), then Vigor
router will download and upgrade the newest information
automatically.
Server
Choose a proper server for signature upgrade from the drop
down list. At present, only two servers
(myvigor.draytek.com or myvigoreu.draytek.com) are
supported.
Syslog
Check the box to record related information on Syslog.
Vigor2960 Series User’s Guide
430
4
4
.
.
1
1
4
4
.
.
1
1
1
1
A
A
P
P
P
P
S
S
u
u
p
p
p
p
o
o
r
r
t
t
L
L
i
i
s
s
t
t
APP Support List displays all of the applications with versions supported by Vigor router.
They are separated with types of IM, P2P, Protocol and Others. Each tab will bring out
different items with supported versions.
Vigor2960 Series User’s Guide
431
4
4
.
.
1
1
5
5
D
D
i
i
a
a
g
g
n
n
o
o
s
s
t
t
i
i
c
c
s
s
In some cases, a user may need to know some information about the router, such as static or
dynamic databases, or other routing information.
4
4
.
.
1
1
5
5
.
.
1
1
R
R
o
o
u
u
t
t
i
i
n
n
g
g
T
T
a
a
b
b
l
l
e
e
Click Diagnostics and click Routing Table to open the web page.
4
4
.
.
1
1
5
5
.
.
1
1
.
.
1
1
R
R
o
o
u
u
t
t
i
i
n
n
g
g
T
T
a
a
b
b
l
l
e
e
Display the information for each route.
Each item will be explained as follows:
Item Description
Refresh
Renew the web page.
Search
Move the mouse cursor onto the box of Search. Click the
Vigor2960 Series User’s Guide
432
mouse button and type the keyword inside the box. The
system will display the records relating to the keyword.
Destination
Display the destination IP address for various routings.
Gateway
Display the default gateway.
Genmask
Display the subnet mask for various routings.
Flags
Display the flag of the routing entry. Possible flags include:
U (route is up)
H (target is a host)
G (use gateway)
R (reinstate route for dynamic routing)
D (dynamically installed by daemon or redirect)
M (modified from routing daemon or redirect)
A (installed by addrconf)
C (cache entry)
! (reject route)
Metric
Display the distance to the target (usually counted in hops).
It may be needed by routing daemons.
Iface
Display the direction of such route represented with
LAN/WAN profile (starting from LAN/WAN profile to
LAN/WAN profile).
Vigor2960 Series User’s Guide
433
4
4
.
.
1
1
5
5
.
.
1
1
.
.
2
2
I
I
P
P
v
v
6
6
R
R
o
o
u
u
t
t
i
i
n
n
g
g
T
T
a
a
b
b
l
l
e
e
Display the information for each route with IPv6 protocol.
Each item will be explained as follows:
Item Description
Refresh
Renew the web page.
Destination
Display the destination IP address for various routings.
Next Hop
Display the next hop address for such route.
Flags
Display the flag of the routing entry. Possible flags include:
U (route is up)
H (target is a host)
G (use gateway)
R (reinstate route for dynamic routing)
D (dynamically installed by daemon or redirect)
M (modified from routing daemon or redirect)
A (installed by addrconf)
C (cache entry)
! (reject route)
Metric
Display the distance to the target (usually counted in hops).
It may be needed by routing daemons.
Iface
Display the direction of such route represented with
LAN/WAN profile (starting from LAN/WAN profile to
LAN/WAN profile).
Vigor2960 Series User’s Guide
434
4
4
.
.
1
1
5
5
.
.
2
2
A
A
R
R
P
P
C
C
a
a
c
c
h
h
e
e
T
T
a
a
b
b
l
l
e
e
Click Diagnostics and click ARP Cache Table to view the content of the ARP (Address
Resolution Protocol) cache held in the router. The table shows a mapping between an
Ethernet hardware address (MAC Address) and an IP address.
4
4
.
.
1
1
5
5
.
.
2
2
.
.
1
1
A
A
R
R
P
P
C
C
a
a
c
c
h
h
e
e
T
T
a
a
b
b
l
l
e
e
Each item will be explained as follows:
Item Description
Refresh
Renew the web page.
Clear All
Remove all of the information from this page.
Search
Move the mouse cursor onto the box of Search. Click the
mouse button and type the keyword inside the box. The
system will display the records relating to the keyword.
IP Address
Display the IP address for different ARP cache.
MAC Address
Display the MAC address for different ARP cache.
User
Display the user name of the client.
Vendor
Display the vendor of the device.
Clear
Delete the selected profile.
IP Object
Click the Add button to add a new IP object for such
Vigor2960 Series User’s Guide
435
4
4
.
.
1
1
5
5
.
.
2
2
.
.
2
2
I
I
P
P
v
v
6
6
N
N
e
e
i
i
g
g
h
h
b
b
o
o
r
r
T
T
a
a
b
b
l
l
e
e
Each item will be explained as follows:
Item Description
Refresh
Renew the web page.
Search
Move the mouse cursor onto the box of Search. Click the
mouse button and type the keyword inside the box. The
system will display the records relating to the keyword.
IP Address
Display the IPv6 address of the neighbor.
Profile
Display the interface to which this neighbor is attached.
MAC Address
Display the MAC address of the neighbor.
Status
Display the status for such neighbor.
INCOMPLETE - Address resolution is in progress and the
link-layer address of the neighbor has not yet been
determined.
REACHABLE - The neighbor is reachable recently (within
tens of seconds ago).
STALE-The neighbor is no longer to be reachable. Yet, until
traffic is sent to the neighbor, no attempt should be made to
verify its reachability.
DELAY - The neighbor is no longer to be reachable, and the
traffic has recently been sent to the neighbor.
Vigor2960 Series User’s Guide
436
Item Description
Rather than probe the neighbor immediately, however, delay
sending probes for a short while in order to give upper layer
protocols a chance to provide reachability confirmation.
PROBE - The neighbor is no longer to be reachable, and
unicast Neighbor Solicitation probes are being sent to verify
reachability.
Vigor2960 Series User’s Guide
437
4
4
.
.
1
1
5
5
.
.
3
3
D
D
N
N
S
S
C
C
a
a
c
c
h
h
e
e
T
T
a
a
b
b
l
l
e
e
The record of domain name and the mapping IP address for answering the DNS query from
LAN will be stored on Vigor router’s Cache temporarily.
Vigor2960 Series User’s Guide
438
4
4
.
.
1
1
5
5
.
.
4
4
D
D
H
H
C
C
P
P
T
T
a
a
b
b
l
l
e
e
The facility provides information on IP address assignments. This information is helpful in
diagnosing network problems, such as IP address conflicts, etc.
4
4
.
.
1
1
5
5
.
.
4
4
.
.
1
1
D
D
H
H
C
C
P
P
T
T
a
a
b
b
l
l
e
e
Click Diagnostics and click DHCP Table to open the web page.
Each item will be explained as follows:
Item Description
Refresh
Renew the web page.
Search
Move the mouse cursor onto the box of Search. Click the
mouse button and type the keyword inside the box. The
system will display the records relating to the keyword.
IP Address
Display the IP address of the static DHCP server.
Start Date
Display the starting date that DHCP server is activated.
Start Time
Display the starting time that DHCP server is activated.
End Date
Display the end date that DHCP server is closed.
End Time
Display the end time that DHCP server is closed.
Mac Address
Display the MAC address of the static DHCP server.
Host ID
Display the IP address or name of the host.
Vigor2960 Series User’s Guide
439
4
4
.
.
1
1
5
5
.
.
4
4
.
.
2
2
D
D
H
H
C
C
P
P
v
v
6
6
T
T
a
a
b
b
l
l
e
e
Click DHCPv6 Table to open the web page.
Each item will be explained as follows:
Item Description
Refresh
Renew the web page.
Search
Move the mouse cursor onto the box of Search. Click the
mouse button and type the keyword inside the box. The
system will display the records relating to the keyword.
Interface
Display the interface used by the DHCP server.
IPv6 Address
Display the IPv6 address of the static DHCP server.
Start Time
Display the starting time that DHCP server is activated.
End Time
Display the end time that DHCP server is closed.
DUID
Display the detailed information for DUID.
Vigor2960 Series User’s Guide
440
4
4
.
.
1
1
5
5
.
.
5
5
S
S
e
e
s
s
s
s
i
i
o
o
n
n
T
T
a
a
b
b
l
l
e
e
Session table can display about 30000 sessions with 20 pages. Click NAT, Local Service,
Open Port or VPN to check the detailed information if required.
Each item will be explained as follows:
Item Description
Refresh
Renew the web page.
Search
Move the mouse cursor onto the box of Search. Click the
mouse button and type the keyword inside the box. The
system will display the records relating to the keyword.
Source
Display the source IP address and port of local PC.
Destination
Display the destination IP address and port of remote host.
WAN
Display the WAN interface used.
Protocol
Display the protocol of such session used.
State
Display the actual state of the TCP connection.
TTL
Display how long the conntrack entry has to live.
Vigor2960 Series User’s Guide
441
4
4
.
.
1
1
5
5
.
.
6
6
M
M
A
A
C
C
A
A
d
d
d
d
r
r
e
e
s
s
s
s
T
T
a
a
b
b
l
l
e
e
The MAC Address Table contains up to 8192 entries, and is sorted first by VLAN ID, then
by MAC address.
Each page shows up to 999 entries from the MAC table, default being 20, selected through
the "entries per page" input field. When first visited, the web page will show the first 20
entries from the beginning of the MAC Table. The first displayed will be the one with the
lowest VLAN ID and the lowest MAC address found in the MAC Table.
Clicking the Refresh button will update the displayed table starting from that or the closest
next MAC Table match.
4
4
.
.
1
1
5
5
.
.
7
7
T
T
r
r
a
a
f
f
f
f
i
i
c
c
S
S
t
t
a
a
t
t
i
i
s
s
t
t
i
i
c
c
s
s
Port Statistics Overview offers an overview of general traffic statistics for all connecting
ports.
Each item will be explained as follows:
Item Description
Vigor2960 Series User’s Guide
442
Refresh
Click it to reload the page.
Clear
Click it to clear the counters for all ports.
Port
Display the interface that data transmission passing through.
Receive/Transmit
(Packets)
Display the packet sizes for data transmission in receiving
and sending.
Receive/Transmit
(Bytes)
Display the number of received and transmitted bytes per
port.
Receive/Transmit
(Error)
Display the number of the error occurred in data receiving
and data sending.
Filtered Receive
Display the number of received frames filtered by the
forwarding process.
Port Detailed Statistics displays detailed statistics for WAN/LAN interface.
Vigor2960 Series User’s Guide
443
4
4
.
.
1
1
5
5
.
.
8
8
T
T
r
r
a
a
f
f
f
f
i
i
c
c
G
G
r
r
a
a
p
p
h
h
Click Diagnostics and click Traffic Graph to pen the web page. Choose the Setup tab to
specify LAN and WAN profiles to display corresponding graphs for CPU, Memory, LAN,
WAN and sessions configurations. Click Refresh to renew the graph at any time.
Each item will be explained as follows:
Item Description
Setup
In this page, simply specify which LAN profile and WAN
profile will be applied. The traffic graph will be drawn based
on the profiles selected.
Enable – Check this box to enable such profile.
LAN – Use the drop down menu to choose a LAN profile.
WAN –Use the drop down menu to choose a WAN profile.
Apply - Click it to save the configuration configured under
the Setup tab.
CPU
Click the CPU tab.
There are three selections provided for you to specify.
Recent 24 Hours – Display the information of CPU
operation about recent 24 hours.
Recent 7 Days – Display the information of CPU operation
about recent 7 days.
Recent 4 Weeks – Display the information of CPU
operation about recent 4 weeks.
Memory
Click the Memory tab.
There are three selections provided for you to specify.
Recent 24 Hours – Display the information of memory
operation about recent 24 hours.
Recent 7 Days – Display the information of memory
operation about recent 7 days.
Recent 4 Weeks – Display the information of memory
operation about recent 4 weeks.
Vigor2960 Series User’s Guide
444
Item Description
LAN
Click the LAN tab.
There are three selections provided for you to specify.
Network Interface – Display the information of LAN or
WAN operation.
Recent 24 Hours – Display the information of LAN
operation about recent 24 hours.
Recent 7 Days – Display the information of LAN operation
about recent 7 days.
Recent 4 Weeks – Display the information of LAN
operation about recent 4 weeks.
WAN
Click the WAN tab.
There are three selections provided for you to specify.
Network Interface – Display the information of WAN or
WAN operation.
Recent 24 Hours – Display the information of WAN
operation about recent 24 hours.
Recent 7 Days – Display the information of WAN operation
about recent 7 days.
Recent 4 Weeks – Display the information of WAN
operation about recent 4 weeks.
Below show a graphic for CPU:
Vigor2960 Series User’s Guide
445
4
4
.
.
1
1
5
5
.
.
9
9
W
W
e
e
b
b
C
C
o
o
n
n
s
s
o
o
l
l
e
e
Click Diagnostics and click Web Console to pen the web page for typing commands used in
console connection. A remote user can operate Vigor2960 from this web page without
installing and opening other connection utility.
4
4
.
.
1
1
5
5
.
.
1
1
0
0
P
P
i
i
n
n
g
g
/
/
T
T
r
r
a
a
c
c
e
e
R
R
o
o
u
u
t
t
e
e
This page allows you to trace the routes from router to the host. Simply type the IP address
of the host in the box and click Start. The result of route trace will be shown on the screen.
Each item will be explained as follows:
Item Description
Ping / TraceRoute
Click Ping to perform ping function.
Click TraceRoute to invoke trace router function.
IPv4 / IPv6
Click IPv4 /IPv6 to determine the format of the IP address
that you can type.
Host
Type the IP address of the host.
Interface
Choose one of the LAN or WAN profile to be applied by
such function.
Start
Click it to start the action of Ping or Trace Route.
Stop
Click it to terminate the action of Ping or Trace Route.
Vigor2960 Series User’s Guide
446
4
4
.
.
1
1
5
5
.
.
1
1
1
1
D
D
a
a
t
t
a
a
F
F
l
l
o
o
w
w
M
M
o
o
n
n
i
i
t
t
o
o
r
r
This page displays the running procedure (such as IP address, session number, transmission
rate, receiving rate, and duration of the time block) by list or by chart for the IP address
monitored and refreshes the data in an interval of several seconds.
4
4
.
.
1
1
5
5
.
.
1
1
1
1
.
.
1
1
D
D
a
a
t
t
a
a
F
F
l
l
o
o
w
w
M
M
o
o
n
n
i
i
t
t
o
o
r
r
Each item will be explained as follows:
Item Description
Enable Dataflow
Monitor
Check this box to enable such function.
Block
Prevent the specified PC accessing into Internet within 5
minutes.
UnBlock
Allow the specified PC accessing into Internet within 5
minutes.
Chart
Click this button to illustrate data chart. Refer to the
following figure as an example.
Recent 1 Hour/ Recent
24 Hours / Recent 7
Days
Display the records with 1 hour/24 hours/7 days recently.
Auto Refresh
Specify the interval of refresh time to obtain the latest status.
The information will update immediately when the Refresh
button is clicked.
Vigor2960 Series User’s Guide
447
Item Description
Refresh
Click it to renew the web page.
IP Address
Display the IP address of the monitored device.
TX rate (Kbps)
Display the transmission speed of the monitored device.
RX rate (Kbps)
Display the receiving speed of the monitored device.
Sessions
Display the session number that you specified in Limit
Session web page.
Block Time
Display the time for the duration of the block.
Profile
Display the WAN interface.
IP
Display the IP address of the WAN interface.
RX Rate
Display the rate of data received.
TX Rate
Display the rate of data transmitted.
RX byte
Display the file size of data received.
TX byte
Display the file size of data transmitted.
4
4
.
.
1
1
5
5
.
.
1
1
1
1
.
.
2
2
S
S
e
e
r
r
v
v
i
i
c
c
e
e
U
U
s
s
a
a
g
g
e
e
M
M
o
o
n
n
i
i
t
t
o
o
r
r
Each item will be explained as follows:
Item Description
Enable Dataflow
Monitor
Check this box to enable such function.
Vigor2960 Series User’s Guide
448
4
4
.
.
1
1
5
5
.
.
1
1
1
1
.
.
3
3
P
P
a
a
c
c
k
k
e
e
t
t
M
M
o
o
n
n
i
i
t
t
o
o
r
r
This function can be used to capture the packets for analysis in the future. Moreover, the
traffic data (obtaining from data flow monitor) also can be downloaded from Vigor router
and stored in the host for future use.
Each item will be explained as follows:
Item Description
Packet count
Specify the threshold value of the packets to be captured by
Vigor router. If the packet captured reaches the threshold
value, Vigor router will cease the packet capturing.
Interface
Specify an interface which will be used to capture the
packets. The default setting is “All”.
Host / Port
Type the IP address of the host or the post number that you
want to monitor.
Start
Click it to capturing the packets and display the results on
this page.
Download
The packets captured by Vigor router will be stored in router
as “packetmonitor.pcap”. Download the file and store on
your host.
Note
A pop up window appears to show special notices for such
function.
Vigor2960 Series User’s Guide
449
4
4
.
.
1
1
5
5
.
.
1
1
1
1
.
.
4
4
G
G
r
r
o
o
u
u
p
p
B
B
a
a
n
n
d
d
w
w
i
i
d
d
t
t
h
h
This page display 怎樣資訊? 這裡提到的 group 是指什麼 group 呢??
4
4
.
.
1
1
5
5
.
.
1
1
2
2
U
U
s
s
e
e
r
r
S
S
t
t
a
a
t
t
u
u
s
s
This page displays connection information of user account /VPN profile, PPPoE Server,
User Management, VPN Connection Management and SSL Proxy for reference.
Vigor2960 Series User’s Guide
450
4
4
.
.
1
1
6
6
C
C
e
e
n
n
t
t
r
r
a
a
l
l
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
(
(
V
V
P
P
N
N
)
)
Vigor2960 can build virtual private network (VPN) between itself and any other TR-069
CPE by the function of central VPN management. In addition, it can be treated as a server
which can manage TR-069 CPE for periodical firmware upgrade, configuration backup and
restoring configuration.
Below shows the menu items:
Note: 1. Such menu can manage the CPE connected through WAN only.
2. Up to 16 devices can be managed.
4
4
.
.
1
1
6
6
.
.
1
1
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
General Setup is used to configure settings which will be used by the clients to register to
such Vigor router. Click the tabs of General Setup and VPN General Setup to configure
the basic settings for Central Management VPN mechanism.
4
4
.
.
1
1
6
6
.
.
1
1
.
.
1
1
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
To enable the Central Management VPN feature, the first thing you have to do is enabling
port settings.
Vigor2960 Series User’s Guide
451
Available parameters are listed as follows:
Item Description
Enable
Check the box to enable such function.
WAN Profile
Choose one interface (WAN or USB) for VPN
establishment.
HTTP Allow
Click Enable to active the HTTP setting.
HTTP Port
Type a port number for HTTP. The default value is 8080.
HTTPS Allow
Click Enable to activate the HTTPS setting.
HTTPS Port
Type a port number for HTTPS. The default value is 8443.
Username
Type a username which will be used by any CPE trying to
connect to Vigor router.
Password
Type a password which will be used by any CPE tried to
connect to Vigor router.
Polling Status
Click Enable to activate polling interval setting.
Polling Interval
Type the time value (unit is second). The range is from 60 ~
86400.
Apply
Click it to save the configuration.
Cancel
Click it to discard the settings configured in this page.
Vigor2960 Series User’s Guide
452
4
4
.
.
1
1
6
6
.
.
1
1
.
.
2
2
V
V
P
P
N
N
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
This page allows you to configure the basic settings for the VPN tunnel of Vigor router.
Item Description
WAN Profile
Choose a WAN interface profile to be used.
Local IP/Subnet
Type the IP address and subnet mask of local host.
IPsec Security Method
Choose one of the following methods for the security of data
transmission. For example, choose AH to specify the IPSec
protocol for the Authentication Header protocol. The data
will be authenticated but not be encrypted.
IKE Phase1 Mode
Choose Aggressive or Main as the IKE Phase1 Mode.
Apply
Click it to save the configuration.
Cancel
Click it to discard the settings configured in this page.
Vigor2960 Series User’s Guide
453
4
4
.
.
1
1
6
6
.
.
2
2
C
C
P
P
E
E
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
All the CPEs managed by Vigor2960 can be seen with icons from this page.
4
4
.
.
1
1
6
6
.
.
2
2
.
.
1
1
C
C
P
P
E
E
M
M
a
a
i
i
n
n
t
t
e
e
n
n
a
a
n
n
c
c
e
e
This page allows you to manage the CPEs connected to Vigor2960.
Page without CPE connected
Page with CPE connected
Available parameters are listed as follows:
Item Description
Managed Devices Status
This area displays icons for the CPE managed by Vigor2960.
Edit – To modify the name and location of specific CPE,
click the one you want and click the Edit button. A pop up
window will appear. Simply change the name (for
identification) and/or location manually.
Vigor2960 Series User’s Guide
454
Detail – It displays the same content as the Edit button.
However, it cannot be used to modify name or location.
Delete – To disconnect the management of any CPE, click
the CPE icon you want and click the Delete button.
Refresh – Click it to refresh current page.
Recycle Bin – All the deleted CPEs will be stored in a
temporary place for the administrator to retrieve. It is useful
especially for the CPEs deleted carelessly.
If you want to retrieve some CPE, click it to open another
window. Deleted CPEs containing related information will
be displayed on the window. Choose the one you want to
retrieve and click Restore. Later, the selected one will appear
on the Managed Devices Status area again.
Maintenance
This area displays all the profiles which are created for
applying to the managed device.
Add – To add a new profile, simply click it to open a pop up
window.
Vigor2960 Series User’s Guide
455
Edit – To modify existed profile, choose the one you want to
change and click this button to open the pop up window.
Delete – To discard any existed profile, simply choose one
you want and click this button to delete the profile.
Refresh – Click it to refresh current page.
File Explorer – Click it to open a file explorer. The
available firmware will be displayed in such page.
Profile – Display the name of the profile.
Device – Display the name (named by Vigor2960) of the
devices selected by such profile.
Name – Display the name (can be modified by the
administrator) of the device.
Action – Display the action specified for such profile.
Schedule – Display the frequency of for such profile which
will be performed by Vigor router.
Weekdays – Display the day(s) chosen for such profile.
Filename – Display the filename of the firmware.
Status – Display current status of the profile has been
Vigor2960 Series User’s Guide
456
finished or not.
Refer to sections “3.4 How to manage the CPE (router) through Vigor2960?” and “3.6
How to upgrade CPE firmware through Vigor2960?” for more detailed information.
H
H
o
o
w
w
t
t
o
o
a
a
d
d
d
d
a
a
n
n
e
e
w
w
M
M
a
a
i
i
n
n
t
t
e
e
n
n
a
a
n
n
c
c
e
e
P
P
r
r
o
o
f
f
i
i
l
l
e
e
Follow the steps below to create a new maintenance profile.
1. Click Add on the Maintenance area.
2. The Maintenance dialog appears.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the maintenance profile.
Device
The drop down list will display all the devices detected by
Vigor2960. Choose the one which will be applied with such
new created profile.
Usually, the name of the device will be assigned by
Vigor2960 automatically. If you want to give a name easy
for easy recognition, refer to 4.11.2.1 CPE Maintenance to
specify another name for the device additionally.
Name
Display the name (can be modified by the administrator) of
Vigor2960 Series User’s Guide
457
the device.
Action
There are three actions for you to choose for such profile.
Firmware Upgrade – It means such profile will be used for
firmware upgrade.
Configuration Backup – It means such profile will be used
for configuration backup of the selected CPE.
Configuration Restore – It means such profile will be used
for restoring the configuration of the selected CPE.
Schedule
The new created profile can be applied to the selected CPE
based on the schedule configured here.
Now – The action will be performed for the selected CPE
immediately.
Once – The action will be performed for the selected CPE at
the specified time, and will be done for once.
Weekdays – The action will be performed for the selected
CPE at the time and date specified below every week.
Start Date /
End Date
It is available only when Once is selected as Schedule.
Specify the starting date /ending date with the format
YYYY-MM-DD.
Start Time /
End Time
It is available only when Once is selected as Schedule.
Specify the starting time /ending time with the format
HH-MM-SS.
Weekdays
It is available only when Weekdays is selected as Schedule.
Simply check the day you want.
Filename
Type the name string of the file which will be used for
firmware upgrade, configuration backup or configuration
restore.
Apply
Click it to save and exit the dialog.
Vigor2960 Series User’s Guide
458
Cancel
Click it to exit the dialog without saving anything.
3. Enter all of the settings and click Apply.
4. A new maintenance profile has been created.
4
4
.
.
1
1
6
6
.
.
2
2
.
.
2
2
V
V
P
P
N
N
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
An easy method is offered to configure VPN settings for building VPN connection between
Vigor2960 (treated as VPN server) and other Vigor router (treated as CPE device, i.e., VPN
client).
Available parameters are listed as follows:
Item Description
Display Screen
Once the device is managed (controlled) by Vigor2960, it
will be displayed on such screen automatically. If not, refer
to sections “3.4 How to manage the CPE (router) through
Vigor2960?” for more detailed information.
If the VPN isn’t established successfully, a red line will
appear instead.
PPTP
To build a quick VPN connection with PPTP, simply click
the remote CPE (waiting for the icon to be bigger) first and
then click it. If the connection is built successfully, a green
line will appear.
IPsec
To build a quick VPN connection with IPsec, simply click
Vigor2960 Series User’s Guide
459
the remote CPE (waiting for the icon to be bigger) first and
then click it. If the connection is built successfully, a blue
line will appear.
SSL
To build a quick VPN connection with SSL, simply click the
remote CPE (waiting for the icon to be bigger) first and then
click it. If the connection is built successfully, a blue line
will appear.
Advanced
To build a VPN connection with detailed configuration (such
as PPP authentication and VJ compression), click Advanced
tool.
Specify the CPE from the Device drop down list; choose the
name of the CPE; select PPTP or IPsec as the Dial Type;
choose PAP_only or PAP_or_CHAP as PPP authentication;
enable or disable VJ Compression; then click Connect to
build the VPN connection.
Note: If the VPN connection has been established
successfully, a new LAN to LAN profile will be created for
the CPE automatically.
Keep VPN Settings
To avoid the VPN be disconnected due to the settings
changed by the client, the connection status can be kept by
specified by such feature.
Add – Click it to open the following dialog. Type the name
of the profile and choose the CPE from the Device drop
down list. Then, click Apply to save the settings. Such
profile will be applied to the device connecting to Vigor2960
with VPN.
Delete – Click it to delete the profile. The VPN between the
router and the client might not be guaranteed.
Refresh – Click it to refresh current page.
Profile – Display of the profile used now.
Vigor2960 Series User’s Guide
460
Device – Display the name of the CPE connected to Vigor
router via VPN.
Name – Display the name (can be modified by the
administrator) of the device. Refer to 4.11.2.1 CPE
Maintenance for detailed information.
Connected Devices
Once the VPN is established successfully, the basic
information such as the connection type, IP address, RX/RX
will be displayed on this field.
Refresh – Click it to refresh current page.
VPN – Display the name of the VPN.
Type – Display the type of the connection mode.
Interface – Display the WAN interface.
Remote IP – Display the IP address of the remote end.
Virtual Network – Display the IP address of Vigor2960.
Up Time –Display the connection time of such VPN.
RX(Packets) /TX(Packets) –Display the number of the
packets exchanged in such VPN.
Disconnect – Click it to disconnect the VPN.
Vigor2960 Series User’s Guide
461
4
4
.
.
1
1
6
6
.
.
2
2
.
.
3
3
M
M
a
a
p
p
To display the location of the selected CPE with a bird’s eye view, open Central
Management>>VPN>>CPE Management and click the tab of Map.
Vigor2960 Series User’s Guide
462
4
4
.
.
1
1
6
6
.
.
3
3
L
L
o
o
g
g
/
/
A
A
l
l
e
e
r
r
t
t
The Log page offers brief information to identify the CPE connected to Vigor2960.
The Alert page offers brief information to identify the CPE connected to Vigor2960.
Vigor2960 Series User’s Guide
463
4
4
.
.
1
1
7
7
C
C
e
e
n
n
t
t
r
r
a
a
l
l
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
(
(
A
A
P
P
)
)
Vigor2960 can manage the access points supporting AP management via Central AP
Management.
A
A
P
P
M
M
a
a
p
p
AP Map is helpful to determine the best location for VigorAP in a room. A floor plan of a
room is required to be uploaded first. By dragging and dropping available VigorAP icon
from the list to the floor plan, the placement with the best wireless coverage will be clearly
indicated through simulated signal strength
L
L
o
o
a
a
d
d
B
B
a
a
l
l
a
a
n
n
c
c
e
e
f
f
o
o
r
r
A
A
P
P
The parameters configured for Load Balance can help to distribute the traffic for all of the
access points registered to Vigor router. Thus, the bandwidth will not be occupied by certain
access points.
A
A
P
P
M
M
a
a
i
i
n
n
t
t
e
e
n
n
a
a
n
n
c
c
e
e
Vigor router can execute configuration backup, configuration restoration, firmware upgrade
and remote reboot for the APs managed by the router. It is very convenient for the
administrator to process maintenance without accessing into the web user interface of the
access point.
Click Central Management>>AP.
Vigor2960 Series User’s Guide
464
Configuration pages with new designed web pages will be shown as follows. They are
suitable and easy to browse on network for PC users and mobile users.
Menu items related to AP are General Setup, Dashboard, Status, WLAN Profile, Rogue AP,
Total Traffic, Event Log, Station Number, AP Maintenance, Traffic Graph, Load Balance,
AP Map, and Function Support List.
Vigor2960 Series User’s Guide
465
4
4
.
.
1
1
7
7
.
.
1
1
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
To enable the Central Management AP feature, the first thing you have to do is enabling port
settings. Click AP Management>>General Setup to get the following page.
Available parameters are listed as follows:
Item Description
AP Management
Check Enable to enable the settings configured in this page.
HTTP Allow
Click Enable to active the HTTP setting.
HTTP Port
Type a port number for HTTP. The default value is 9080.
HTTPS Allow
Click Enable to activate the HTTPS setting.
HTTPS Port
Type a port number for HTTPS. The default value is 9443.
Username
Type a username which will be used by any Access Point
trying to connect to Vigor router.
Password
Type a password which will be used by any Access Point
tried to connect to Vigor router.
Polling Status
Click Enable to activate polling interval setting.
Polling Interval
Type the time value (unit is second). The range is from 60 ~
86400.
Apply
Click it to save the configuration.
Vigor2960 Series User’s Guide
466
4
4
.
.
1
1
7
7
.
.
2
2
D
D
a
a
s
s
h
h
b
b
o
o
a
a
r
r
d
d
This page shows VigorAP’s information about Event Log, Total Traffic or Station
Number by displaying text and histogram.
4
4
.
.
1
1
7
7
.
.
3
3
S
S
t
t
a
a
t
t
u
u
s
s
This page displays general information for the VigorAP managed by Vigor2960.
Available parameters are listed as follows:
Item Description
Status
Display current status (connected or disconnected) of the
managed AP.
Device Name
The name of the AP managed by Vigor router will be
displayed here.
IP Address
Display the true IP address of the access point.
SSID
Display the SSID configured for the access point(s)
Vigor2960 Series User’s Guide
467
connected to Vigor2960.
Ch.
Display the channel used by the access point.
WL Client
Display current number/maximum number (ex: 0/64) of
clients connecting to the selected wireless access point.
Version
Display the firmware version used by the access point.
Config
Click it to open the configuration page of the selected
VigorAP. The device name, Login username and Login
password can be modified if required.
Clear
Such button allows you to remove the selected VigorAP.
Vigor2960 Series User’s Guide
468
4
4
.
.
1
1
7
7
.
.
4
4
W
W
L
L
A
A
N
N
P
P
r
r
o
o
f
f
i
i
l
l
e
e
WLAN profile is used to apply to a selected access point. It is very convenient for the
administrator to configure the setting for access point without opening the web user interface
of the access point.
Check the box on the left side of the selected profile to modify the content of the profile. The
Clone, Edit and Apply To Device buttons will be available then.
Available settings are explained as follows:
Item Description
Profile Name
Display the name of the profile.
The default profile cannot be renamed.
Main SSID
Display the SSID configured by such wireless profile.
Security
Display the security mode selected by such wireless profile.
Multi-SSID
Enable means multiple SSIDs (more than one) are active.
Disable means only SSID1 is active.
WLAN ACL
Display the mode of the access control list.
Rate Control
Display the upload and/or download transmission rate.
Clone
It can copy settings from an existing WLAN profile to
another WLAN profile.
First, you have to check the box of the existing profile as the
original profile. Second, click Clone. The following dialog
will appear.
Vigor2960 Series User’s Guide
469
Third, choose the profile index to accept the settings from the
original profile. Forth, type a new name in the field of
Renamed as. Last, click Apply to save the settings on this
dialog.
The new profile has been created with the settings coming
from the original profile.
Edit / Add
It allows you to modify an existing wireless profile or create a
new wireless profile.
Apply to Device
Click it to apply the selected wireless profile to the specified
Access Point.
Simply choose the device you want from Existing Device
field. Click >> to move the device to Selected Device field.
Then, click OK.
The selected WLAN profile will be applied to the selected
access point immediately. Later the access point will reboot.
Vigor2960 Series User’s Guide
470
H
H
o
o
w
w
t
t
o
o
e
e
d
d
i
i
t
t
t
t
h
h
e
e
w
w
i
i
r
r
e
e
l
l
e
e
s
s
s
s
L
L
A
A
N
N
p
p
r
r
o
o
f
f
i
i
l
l
e
e
?
?
1. Check the box on the left side of the selected profile.
2. Click the Edit button to display the following page.
Note: The function of Auto Provision is available for the default WLAN profile.
3. After finished the general settings configuration, click Next to open the following page
for 2.4G wireless security settings.
Vigor2960 Series User’s Guide
471
4. After finished the above web page configuration, click Next to open the following page
for 5G wireless security settings.
5. When you finished the above web page configuration, click Finish to exit and return to
the first page. The modified WLAN profile will be shown on the web page.
Vigor2960 Series User’s Guide
472
4
4
.
.
1
1
7
7
.
.
5
5
A
A
P
P
M
M
a
a
i
i
n
n
t
t
e
e
n
n
a
a
n
n
c
c
e
e
Vigor router can execute configuration backup, configuration restoration, firmware upgrade
and remote reboot for the APs managed by the router. It is very convenient for the
administrator to process maintenance without accessing into the web user interface of the
access point.
Config Backup can be performed to one AP at one time. Others functions (e.g., Config
Restore, Firmware Upgrade, Remote Reboot) can be performed to more than one AP at one
time by using Vigor2960.
Available settings are explained as follows:
Item Description
Action Type
There are four actions provided by Vigor router to manage
the access points.
Vigor router can backup the configuration of the selected
AP, restore the configuration for the selected AP, perform
the firmware upgrade of the selected AP, reboot the
selected AP remotely and perform the factory reset for the
selected AP.
File/Path
Specify the file and the path which will be used to perform
Config Restore or Firmware Upgrade.
Available Device
Model – Display the model name connected to Vigor2960.
Device name – Display the device name of AP connected to
Vigor2960.
Apply
Click it to apply the action to the selected AP.
Vigor2960 Series User’s Guide
473
4
4
.
.
1
1
7
7
.
.
6
6
A
A
P
P
M
M
a
a
p
p
This function is helpful to determine the best location for VigorAP in a room. A floor plan of
a room is required to be uploaded first. By dragging and dropping available VigorAP icon
from the list to the floor plan, the placement with the best wireless coverage will be clearly
indicated through simulated signal strength.
Each item will be explained as follows:
Item Description
Location
Display a brief description (e.g., ground, roof) of the AP
Map.
Online APs
Display the number of VigorAP configured and powered up.
Total APs
Display the total number of VigorAP configured.
Clients
Display the number of clients accessing Internet through the
VigorAP.
Dimension(m)
Display the width and length of the AP map.
View
Click it to review the layout for the selected AP map.
Edit
Click it to modify AP map.
C
C
r
r
e
e
a
a
t
t
i
i
n
n
g
g
/
/
E
E
d
d
i
i
t
t
i
i
n
n
g
g
t
t
h
h
e
e
A
A
P
P
M
M
a
a
p
p
P
P
r
r
o
o
f
f
i
i
l
l
e
e
1. Select a radio button and click Edit to open the following web page.
Vigor2960 Series User’s Guide
474
Available settings are explained as follows:
Item Description
Location (Profile
Name)
Type a name (e.g., MKT_car) for the AP map profile.
Upload Map
Click the Select button to choose an image file (only JPG and
PNG are supported) for floor plan.
Next
Click it to go to the next configuration page.
Cancel
Click it to cancel the configuration.
2. Click Next. The configuration page with floor plan will be shown on the web page. Set
the dimensions by typing suitable numbers (unit: meter) for the length and width. Or
use the ruler icon to draw a line on the map to calculate the dimensions.
Vigor2960 Series User’s Guide
475
3. Click the Planning tab. Drag and drop an AP icon from Compatible AP List to the
map on the left side.
4. Check the box of Show AP Coverage on 5GHz/2.4 to display the signal coverage area.
5. Adjust the AP on the map to find out which place can have the best wireless coverage.
At last, click Save.
Vigor2960 Series User’s Guide
476
4
4
.
.
1
1
7
7
.
.
7
7
T
T
r
r
a
a
f
f
f
f
i
i
c
c
G
G
r
r
a
a
p
p
h
h
Click Traffic Graph to open the web page. Choose one of the managed Access Points,
LAN-A or LAN-B, daily or weekly for viewing data transmission chart. Click Refresh to
renew the graph at any time.
Vigor2960 Series User’s Guide
477
4
4
.
.
1
1
7
7
.
.
8
8
R
R
o
o
g
g
u
u
e
e
A
A
P
P
Access Points can be classified with friendly (green) APs, rogue APs (red) and unknown
(black) APs in different colors.
This page displays the access point scanned by Vigor router.
Each item will be explained as follows:
Item Description
Rescan
Click to scan the access points again.
Reload
Click it to refresh the web page immediately.
Filter by type
AP status page will be displayed based on the type (Friendly,
Rogue, Unknown) of access points. That is, only the selected
type (Friendly, Rogue, Unknow) will be shown on this page.
However, if unknown is selected, Vigor router will let you to
classify the selected AP as a Rogue or Friendly AP.
Filter by AP
AP status page will be displayed based on the model of the
access points. That is, only the selected AP model will be
shown on this page.
AP’s MAC Address
When an AP is selected, the MAC address related to that AP
Vigor2960 Series User’s Guide
478
Item Description
will be displayed automatically.
AP’s SSID
When an AP is selected, the SSID of the selected AP will be
displayed automatically.
Add to Friendly APs
Add - Click it to make the selected AP be classified as
friendly AP.
Rogue APS
Add - Click it to make the selected AP be classified as rogue
AP.
Delete from Friendly /
Rogue APs
Click it to make the selected AP be classified as unknown
AP.
Ch
Display the channel used by the detected access point.
SSID
Display the SSID specified for the detected access point.
BSSID
Display the MAC address of the detected access point.
Security
Display the security mode (e.g., WPA/PSK, Mixed
(WPA+WPA2)..) used by the selected access point.
Signal
Display the wireless signal strength of the access point.
Last Detected
Display the date and time that such access point was detected
by Vigor router.
Vigor2960 Series User’s Guide
479
4
4
.
.
1
1
7
7
.
.
9
9
E
E
v
v
e
e
n
n
t
t
L
L
o
o
g
g
Time and event log for all of the APs managed by Vigor router will be shown on this page. It
is useful for troubleshooting if required.
Each item will be explained as follows:
Item Description
Refresh
Click it to refresh the web page immediately.
Auto Refresh
The system will refresh the web after specified time
automatically.
Display
Specify how many records will be displayed in this page.
Type
Display the type (processing or finished) of the event.
Date
Display the date and time of the event occurred.
Device
Display the name of the access point.
Action
Display the action executed for the access point.
Message
Display the detailed execution process.
Vigor2960 Series User’s Guide
480
4
4
.
.
1
1
7
7
.
.
1
1
0
0
T
T
o
o
t
t
a
a
l
l
T
T
r
r
a
a
f
f
f
f
i
i
c
c
Such page will display the total traffic of data receiving and data transmitting for VigorAPs
managed by Vigor router.
4
4
.
.
1
1
7
7
.
.
1
1
1
1
S
S
t
t
a
a
t
t
i
i
o
o
n
n
N
N
u
u
m
m
b
b
e
e
r
r
The total number of the wireless clients will be shown on this page, no matter what mode of
wireless connection (2.4G WLAN or 5G WLAN) used by wireless clients to access into
Internet through VigorAP.
Vigor2960 Series User’s Guide
481
4
4
.
.
1
1
7
7
.
.
1
1
2
2
L
L
o
o
a
a
d
d
B
B
a
a
l
l
a
a
n
n
c
c
e
e
The parameters configured for Load Balance can help to distribute the traffic for all of the
access points registered to Vigor router. Thus, the bandwidth will not be occupied by certain
access points.
Available settings are explained as follows:
Item Description
AP Load Balance
It is used to determine the operation mode when the system
detects overload between access points.
By Station Number –The operation of load balance will be
executed based on the station number configured in this
page. It is used to limit the allowed number for the station
connecting to the access point. The purpose is to prevent lots
of stations connecting to access point at the same time and
causing traffic unbalanced.
By Traffics – The operation of load balance will be executed
according to the traffic configuration in this page.
By Station Numbers or Traffics - The operation of load
balance will be executed by station number or traffic by the
system automatically.
Station Number
Threshold
Please define the required station number for WLAN
(2.4GHz) and WLAN (5GHz) separately.
Traffic Threshold
Upload Limit –Use the drop down list to specify the traffic
limit for uploading.
Download Limit – Use the drop down list to specify the
traffic limit for downloading.
Action when Threshold
Exceeded
Stop accepting new connections – When the access point is
overload (e.g., reaching the limit of station number or limit
of network traffic), it will terminate any new connection
requested by client’s station.
Vigor2960 Series User’s Guide
482
Item Description
Dissociate existing station by longest idle time - When the
access point is overload (e.g., reaching the limit of station
number or limit of network traffic), it will terminate the
network connection of the client’s station which is idle for a
longest time.
Dissociate existing station by worst signal strength -
When the access point is overload (e.g., reaching the limit of
station number or limit of network traffic), it will terminate
the network connection of the client’s station with the
weakest signal.
Apply
Click it to save the configuration.
Vigor2960 Series User’s Guide
483
4
4
.
.
1
1
7
7
.
.
1
1
3
3
F
F
u
u
n
n
c
c
t
t
i
i
o
o
n
n
S
S
u
u
p
p
p
p
o
o
r
r
t
t
L
L
i
i
s
s
t
t
Click the Client tab to list the AP management functions that the Access Points support
under different firmware versions.
Click the Server tab to list the AP management functions that Vigor router supports under
different firmware versions.
Vigor2960 Series User’s Guide
484
4
4
.
.
1
1
8
8
C
C
e
e
n
n
t
t
r
r
a
a
l
l
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
(
(
S
S
w
w
i
i
t
t
c
c
h
h
)
)
Vigor router can manage lots of VigorSwitch devices connected to it. Through profile and
group settings, the administrator can execute firmware/configuration backup, restore for
VigorSwitch device, reboot the device or return to factory default settings of VigorSwitch at
one time. Before using such menu, please enable External Devices Auto Discovery on
External Devices first.
Click Central Management>>Switch to open configuration pages in new designed web
pages. They are suitable and easy to browse on network for PC users and mobile users.
Menu items related to Switch are Status, Profile, Group, Maintenance and Support List.
4
4
.
.
1
1
8
8
.
.
1
1
S
S
t
t
a
a
t
t
u
u
s
s
4
4
.
.
1
1
8
8
.
.
1
1
.
.
1
1
S
S
w
w
i
i
t
t
c
c
h
h
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
Such page displays information, including Group, Switch name, IP address, model, System
Up Time, Port in Use, Clients, and Firmware Version of VigorSwitch connected to
Vigor2960 series.
VigorSwitch listed below Status means the switch is managed by Viogr2960; a VigorSwitch
listed below New Switch means it is not managed by Vigor2960 yet.
Vigor2960 Series User’s Guide
485
Each item will be explained as follows:
Item Description
Enable Switch
Management
Check the box to enable switch management.
Refresh
Renew current web page.
Auto Refresh
Specify the interval of refresh time to obtain the latest status.
The information will update immediately when the Refresh
button is clicked.
Status
Status – Green icon means the VigorSwitch does connect to
Vigor2960 and is managed by Vigor2960. Grey icon means
Vigor2960 is detecting such VigorSwitch still. Red icon
means Vigor2960 cannot access it to get status information
for accessing password configuration of VigorSwitch is
wrong or Telnet service is disabled.
Switch Name – Display the name of VigorSwitch.
Group – Display the name of the group.
IP Address – Display the IP address link of VigorSwitch.
You can click the link to access into the web user interface
of VigorSwitch.
Mac Address – Display the MAC address of VigorSwitch.
Model – Display the model name of VigorSwitch.
System Up Time – Display the time accumulated since this
Vigorwitch is powered up.
Port in Use –Display the number of LAN ports used in
VigorSwitch.
Clients –Display how many devices connected to
VigorSwitch.
Firmware Version - Display the firmware version that
VigorSwitch current used.
Vigor2960 Series User’s Guide
486
New Switch
Status –Green icon means the VigorSwitch does connect to
Vigor2960 and is managed by Vigor2960. Grey icon means
Vigor2960 is detecting such VigorSwitch still. Red icon
means Vigor2960 cannot access it to get status information
for accessing password configuration of VigorSwitch is
wrong or Telnet service is disabled.
Switch Name – Display the name of VigorSwitch.
IP Address – Display the IP address link of VigorSwitch.
You can click the link to access into the web user interface
of VigorSwitch.
Mac Address – Display the MAC address of VigorSwitch.
Model – Display the model name of VigorSwitch.
Firmware Version – Display the firmware version that
VigorSwitch current used.
Account - It is used to change the password for accessing
into VigorSwitch.
Add – Click it to make the selected VigorSwitch be
managed by Vigor2960.
4
4
.
.
1
1
8
8
.
.
1
1
.
.
1
1
S
S
w
w
i
i
t
t
c
c
h
h
H
H
i
i
e
e
r
r
a
a
r
r
c
c
h
h
y
y
Such page displays the hierarchy of VigorSwitch(es) managed under Vigor2960.
Note: If the hierarchy display is incorrect, please access into the web user interface of
VigorSwitch and enable the function of LLDP (e.g., Configuration >>DDLP>>LLDP
General Setup in VigorSwitch 2261). The interval for LLDP shall be less than 3 minutes
(the default setting, 30 seconds).
Vigor2960 Series User’s Guide
487
4
4
.
.
1
1
8
8
.
.
2
2
P
P
r
r
o
o
f
f
i
i
l
l
e
e
This page will show general information, such as name, group, IP address, MAC address,
model and password of VigorSwitch only when it connects to Vigor2960 series. By clicking
the edit button, a profile setting page for that switch will be shown. Note that each profile
represents one VigorSwitch.
Each item will be explained as follows:
Item Description
Enable Switch
Management
Check the box to enable switch management.
Refresh
Renew current web page.
Auto Refresh
Specify the interval of refresh time to obtain the latest status.
The information will update immediately when the Refresh
button is clicked.
Switch List
Status – Green icon means the VigorSwitch does connect to
Vigor2960 and is managed by Vigor2960. Grey icon means
Vigor2960 is detecting such VigorSwitch still. Red icon
means Vigor2960 cannot access it to get status information
for accessing password configuration of VigorSwitch is
wrong or Telnet service is disabled.
Switch Name – Display the name of VigorSwitch.
Group – Display the name of the group.
IP Address – Display the IP address link of VigorSwitch.
You can click the link to access into the web user interface
of VigorSwitch.
Mac Address – Display the MAC address of VigorSwitch.
Model – Display the model name of VigorSwitch.
Account - It is used to change the password for accessing
into VigorSwitch.
Edit – It is used to change general settings for the selected
VigorSwitch.
Del – It is used to remove the profiles for the selected
Vigor2960 Series User’s Guide
488
VigorSwitch.
New Switch
Status –Green icon means the VigorSwitch does connect to
Vigor2960 and is managed by Vigor2960. Grey icon means
Vigor2960 is detecting such VigorSwitch still. Red icon
means Vigor2960 cannot access it to get status information
for accessing password configuration of VigorSwitch is
wrong or Telnet service is disabled.
Switch Name – Display the name of VigorSwitch.
IP Address – Display the IP address link of VigorSwitch.
You can click the link to access into the web user interface
of VigorSwitch.
Mac Address – Display the MAC address of VigorSwitch.
Model – Display the model name of VigorSwitch.
Firmware Version – Display the firmware version that
VigorSwitch current used.
Account - It is used to change the password for accessing
into VigorSwitch.
Add - The one under New Switch List is allowed to be
managed under current used group.
H
H
o
o
w
w
t
t
o
o
E
E
d
d
i
i
t
t
t
t
h
h
e
e
V
V
i
i
g
g
o
o
r
r
S
S
w
w
i
i
t
t
c
c
h
h
P
P
r
r
o
o
f
f
i
i
l
l
e
e
From the Switch List, choose the one you want to edit and then click the Edit icon to open
the following page. The original settings configured in VigorSwitch will be displayed as
follows:
Item Description
Info
Display the basic information of selected VigorSwitch.
sync
Click the button to download configuration settings of
VigorSwitch to be used by Switch Management.
IP Address
The IP address of VigorSwitch will be displayed
automatically.
Vigor2960 Series User’s Guide
489
Switch Name
Name of VigorSwitch will be displayed here automatically.
Comment
Type any description for such switch if required.
Enable Copy
Configuration
Check Enable to activate such function.
Send to Device
Current setting will be saved. Meanwhile, the configuration
in VigorSwitch also will be rewritten immediately.
Type new values and click Send to Device for saving the configurations.
Then, click the Port tab to change the port setting if required.
After finished the port configuration, click the VLAN tab to modify settings relevant to
VLAN.
Vigor2960 Series User’s Guide
490
Vigor2960 Series User’s Guide
491
4
4
.
.
1
1
8
8
.
.
3
3
G
G
r
r
o
o
u
u
p
p
Different switches can be classified into different group(s).
Through the common password setting, it is not necessary for the system administrator to
remember various login passwords to access into different VigorSwitch devices.
Click the icon under Operation to create/edit a switch group.
Available settings are explained as follows:
Item Description
Group Name
Type a name as the group name. Different switches can be
classified within a group.
Existing Switch
Display all of the VigorSwitch devices connecting to
Vigor2960.
Member Switch
Choose the switches you want to group and click the button
“” to move the selected devices onto the field of Member
Switch. Devices under Member Switch will be grouped
under such group profile.
Vigor2960 Series User’s Guide
492
Apply
Click it to save the configuration.
Cancel
Click it to exit the setting page without saving any change.
4
4
.
.
1
1
8
8
.
.
4
4
M
M
a
a
i
i
n
n
t
t
e
e
n
n
a
a
n
n
c
c
e
e
Such feature can execute configuration backup, restore of selected VigorSwitch device(s) or
reboot the VigorSwitch devices remotely or reset the VigorSwitch devices with factory
default settings, without accessing into the web user interface of VigorSwitch respectively. It
is convenient for system administrator to manage VigorSwitch devices.
Available settings are explained as follows:
Item Description
Action Type
Five actions including configuration backup, configuration
restore, configuration restore to router and switch, remote
reboot and factory reset are offered by Vigor2960 to perform
on VigorSwitch.
Select File
Click
to find out the required file. Such option is
available when Config Restore To Router / Config Restore
To Router And Switch is selected as Action Type.
Select Device
Choose the switch to be applied with the action
Apply
Click it to immediately perform the action (configuration
backup, configuration restore, remote reboot and factory
reset) on the device(s) listed in Selected Device.
Cancel
Click it to cancel the setting changes.
Vigor2960 Series User’s Guide
493
4
4
.
.
1
1
8
8
.
.
5
5
S
S
u
u
p
p
p
p
o
o
r
r
t
t
L
L
i
i
s
s
t
t
This page lists all models of VigorSwitch which can be managed by Vigor2960 via Switch
Management.
4
4
.
.
1
1
9
9
E
E
x
x
t
t
e
e
r
r
n
n
a
a
l
l
D
D
e
e
v
v
i
i
c
c
e
e
s
s
Vigor router can be used to connect with many types of external devices. In order to control
or manage the external devices conveniently, open External Devices to make detailed
configuration.
Each item will be explained as follows:
Item Description
External Devices Auto
Discovery
Check the box to detect the external device connected to
Vigor2960.
Refresh
Click it to renew the web page.
Vigor2960 Series User’s Guide
494
Item Description
Status
Display current status (online or offline) of the device.
Model Name
Display the model name of the external product.
MAC Address
Display the MAC address of the external product.
IP Address
Display the IP address of the external product.
Connection Time
Display the connection time that the external product
connecting to Vigor2960.
Clear
Click the icon
to remove the record of the device
when it is offline.
From this web page, check the box of Enable External Devices. Later, all the available
devices will be displayed in this page with icons and corresponding information. You can
change the device name if required or remove the information for off-line device whenever
you want.
Note: Only DrayTek products can be detected by this function.
4
4
.
.
2
2
0
0
P
P
r
r
o
o
d
d
u
u
c
c
t
t
R
R
e
e
g
g
i
i
s
s
t
t
r
r
a
a
t
t
i
i
o
o
n
n
Please refer to section 2.3 Register Vigor Router for more detailed information.
Vigor2960 Series User’s Guide
495
C
C
h
h
a
a
p
p
t
t
e
e
r
r
5
5
:
:
T
T
r
r
o
o
u
u
b
b
l
l
e
e
S
S
h
h
o
o
o
o
t
t
i
i
n
n
g
g
This section will guide you to solve abnormal situations if you cannot access into the Internet
after installing the router and finishing the web configuration. Please follow sections below
to check your basic installation status stage by stage.
Checking if the hardware status is OK or not.
Checking if the network connection settings on your computer are OK or not.
Pinging the router from your computer.
Checking if the ISP settings are OK or not.
Backing to factory default setting if necessary.
If all above stages are done and the router still cannot run normally, it is the time for you to
contact your dealer for advanced help.
5
5
.
.
1
1
C
C
h
h
e
e
c
c
k
k
i
i
n
n
g
g
I
I
f
f
t
t
h
h
e
e
H
H
a
a
r
r
d
d
w
w
a
a
r
r
e
e
S
S
t
t
a
a
t
t
u
u
s
s
I
I
s
s
O
O
K
K
o
o
r
r
N
N
o
o
t
t
Follow the steps below to verify the hardware status.
1. Check if the power line and WLAN/LAN cable connections is OK.
If not, refer to “1.3 Hardware Installation” for reconnection.
2. Turn on the router. Make sure the ACT LED blink once per second and the
correspondent LAN LED is bright.
3. If not, it means that there is something wrong with the hardware status. Simply back to
“1.3 Hardware Installation” to execute the hardware installation again. And then, try
again.
Vigor2960 Series User’s Guide
496
5
5
.
.
2
2
C
C
h
h
e
e
c
c
k
k
i
i
n
n
g
g
I
I
f
f
t
t
h
h
e
e
N
N
e
e
t
t
w
w
o
o
r
r
k
k
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
o
o
n
n
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
o
o
n
n
Y
Y
o
o
u
u
r
r
C
C
o
o
m
m
p
p
u
u
t
t
e
e
r
r
I
I
s
s
O
O
K
K
o
o
r
r
N
N
o
o
t
t
Sometimes the link failure occurs due to the wrong network connection settings. After trying
the above section, if the link is stilled failed, please do the steps listed below to make sure
the network connection settings is OK.
F
F
o
o
r
r
W
W
i
i
n
n
d
d
o
o
w
w
s
s
The example is based on Windows 7. As to the examples for other operation
systems, please refer to the similar steps or find support notes in
www.draytek.com.
1. Open All Programs>>Getting Started>>Control Panel. Click Network and
Sharing Center.
2. In the following window, click Change adapter settings.
3. Icons of network connection will be shown on the window. Right-click on Local Area
Connection and click on Properties.
Vigor2960 Series User’s Guide
497
4. Select Internet Protocol Version 4 (TCP/IP) and then click Properties.
5. Select Obtain an IP address automatically and Obtain DNS server address
automatically. Finally, click OK.
F
F
o
o
r
r
M
M
a
a
c
c
O
O
S
S
1. Double click on the current used Mac OS on the desktop.
2. Open the Application folder and get into Network.
Vigor2960 Series User’s Guide
498
3. On the Network screen, select Using DHCP from the drop down list of Configure
IPv4.
Vigor2960 Series User’s Guide
499
5
5
.
.
3
3
P
P
i
i
n
n
g
g
i
i
n
n
g
g
t
t
h
h
e
e
R
R
o
o
u
u
t
t
e
e
r
r
f
f
r
r
o
o
m
m
Y
Y
o
o
u
u
r
r
C
C
o
o
m
m
p
p
u
u
t
t
e
e
r
r
The default gateway IP address of the router is 192.168.1.1. For some reason, you might
need to use “ping” command to check the link status of the router. The most important
thing is that the computer will receive a reply from 192.168.1.1. If not, please check the
IP address of your computer. We suggest you setting the network connection as get IP
automatically. (Please refer to the section 5.2)
Please follow the steps below to ping the router correctly.
F
F
o
o
r
r
W
W
i
i
n
n
d
d
o
o
w
w
s
s
1. Open the Command Prompt window (from Start menu> Run).
2. Type command (for Windows 95/98/ME) or cmd (for Windows NT/ 2000/XP/Vista/7).
The DOS command dialog will appear.
3. Type ping 192.168.1.1 and press [Enter]. If the link is OK, the line of “Reply from
192.168.1.1:bytes=32 time<1ms TTL=255” will appear.
4. If the line does not appear, please check the IP address setting of your computer.
F
F
o
o
r
r
M
M
a
a
c
c
O
O
S
S
(
(
T
T
e
e
r
r
m
m
i
i
n
n
a
a
l
l
)
)
1. Double click on the current used Mac OS on the desktop.
2. Open the Application folder and get into Utilities.
3. Double click Terminal. The Terminal window will appear.
4. Type ping 192.168.1.1 and press [Enter]. If the link is OK, the line of “64 bytes from
192.168.1.1: icmp_seq=0 ttl=255 time=xxxx ms” will appear.
Vigor2960 Series User’s Guide
500
5
5
.
.
4
4
C
C
h
h
e
e
c
c
k
k
i
i
n
n
g
g
I
I
f
f
t
t
h
h
e
e
I
I
S
S
P
P
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
a
a
r
r
e
e
O
O
K
K
o
o
r
r
N
N
o
o
t
t
Open Online Status to check current network status. Be careful to check if the settings
coming from your ISP have been typed correctly or not.
Vigor2960 Series User’s Guide
501
If there is something wrong with the configuration, please go to WAN page and choose
General Setup again to modify the WAN connection.
5
5
.
.
5
5
B
B
a
a
c
c
k
k
i
i
n
n
g
g
t
t
o
o
F
F
a
a
c
c
t
t
o
o
r
r
y
y
D
D
e
e
f
f
a
a
u
u
l
l
t
t
S
S
e
e
t
t
t
t
i
i
n
n
g
g
I
I
f
f
N
N
e
e
c
c
e
e
s
s
s
s
a
a
r
r
y
y
Sometimes, a wrong connection can be improved by returning to the default settings. Try to
reset the router by software or hardware.
Warning: After pressing factory default setting, you will lose all settings you did
before. Make sure you have recorded all useful settings before you pressing.
S
S
o
o
f
f
t
t
w
w
a
a
r
r
e
e
R
R
e
e
s
s
e
e
t
t
You can reset router to factory default via Web page.
Go to System Maintenance>> Reboot System on the web page. The following screen will
appear. Choose the selection you need and click Reboot After few seconds, the router will
return all the settings to the factory settings.
Vigor2960 Series User’s Guide
502
H
H
a
a
r
r
d
d
w
w
a
a
r
r
e
e
R
R
e
e
s
s
e
e
t
t
While the router is running (ACT LED blinking), press the Factory Reset button and hold
for more than 5 seconds. When you see the ACT LED blinks rapidly, please release the
button. Then, the router will restart with the default configuration.
After restore the factory default setting, you can configure the settings for the router again to
fit your personal request.
5
5
.
.
6
6
C
C
o
o
n
n
t
t
a
a
c
c
t
t
i
i
n
n
g
g
D
D
r
r
a
a
y
y
T
T
e
e
k
k
If the router settings are correct at all, and the router still does not connect to internet, please
contact DrayTek to help you for configuration.
Also, if the router still cannot work correctly, please contact DrayTek for help. For any
further questions, please send e-mail to support@draytek.com
.
Vigor2960 Series User’s Guide
503
C
C
h
h
a
a
p
p
t
t
e
e
r
r
6
6
:
:
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
s
s
6
6
.
.
1
1
A
A
c
c
c
c
e
e
s
s
s
s
i
i
n
n
g
g
T
T
e
e
l
l
n
n
e
e
t
t
o
o
f
f
V
V
i
i
g
g
o
o
r
r
R
R
o
o
u
u
t
t
e
e
r
r
This chapter also gives you a general description for accessing telnet and describes the
firmware versions for the routers explained in this manual.
Info
For Windows 7 user, please make sure the Windows Features of Telnet
Client has been turned on under Control Panel>>Programs.
Type cmd and press Enter. The Telnet terminal will be open later.
In the following window, type Telnet 192.168.1.1 as below and press Enter. Note that the IP
address in the example is the default address of the router. If you have changed the default,
enter the current IP address of the router.
Next, type admin/admin for Account/Password.
Vigor2960 Series User’s Guide
504
For users using previous Windows system (e.g., 2000/XP), simply click Start >> Run and
type Telnet 192.168.1.1 in the Open box as below.
Next, type admin/admin for Account/Password.
Vigor2960 Series User’s Guide
505
6
6
.
.
2
2
G
G
l
l
o
o
b
b
a
a
l
l
C
C
o
o
m
m
m
m
a
a
n
n
d
d
s
s
Type ? to get a list of global commands.
Global Commands contains - apply, enable, fpp, help, history, logout, ping, ping6, restart,
status, traceroute, uci, wd_off and exit. Each command will be explained as follows.
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
a
a
p
p
p
p
l
l
y
y
This command is used for applying settings/modifications onto Vigor router. To configure,
create, delete, or edit any command, type this command to activate the configuration.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960>apply [config]
Vigor2960>apply [config name]
Command Description
[config /
config name]
Type the name of the configuration, e.g., “appuser” (means application
user profile).
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960> apply appuser
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
e
e
n
n
a
a
b
b
l
l
e
e
This command is used for changing current status into “enable” mode. Next, the
configuration commands (including applications, bandwidth, fw, nat, object_setting, system
terminal, user, vpn and etc.,) can be seen and used only when the enable command is used
first.
To leave “enable” mode, simply type “exit”.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960 Series User’s Guide
506
Vigor2960>enable
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960> enable
Entering enable mode...
Vigor2960# exit
Leaving enable mode...
Vigor2960>
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
f
f
p
p
p
p
This command can change inspection policy and packet count for default policy.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960>fpp [inspection] [packets]
Command Description
[inspection]
Set 1 to enable inspection based on user-defined packet number.
Set 0 to make inspection based on default packet number.
[packets]
Set the number of packets needed to be inspected.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960> fpp
fpp [inspection] [packets]
Vigor2960> fpp 1 1000
Set inspection : 1
Set packets : 1000
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
h
h
e
e
l
l
p
p
This command is used for displaying an overview of CLI syntax.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960>help
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960> help
CONTEXT SENSITIVE HELP
[?] - Display context sensitive help. This is either a list of possible
command completions with summaries, or the full syntax of the
current command. A subsequent repeat of this key, when a command
has been resolved, will display a detailed reference.
AUTO-COMPLETION
The following keys both perform auto-completion for the current command
line.
If the command prefix is not unique then the bell will ring and a
subsequent repeat of the key will display possible completions.
Vigor2960 Series User’s Guide
507
[enter] - Auto-completes, syntax-checks then executes a command. If
there is a syntax error then offending part of the command line will
be highlighted and explained.
.
.
.
.
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
h
h
i
i
s
s
t
t
o
o
r
r
y
y
This command can display current session command line history.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960>history
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960> history
1 status
2 status conn_num
4 status dhcp host ID
5 status dhcp
6 status firewall
7 status interface
8 status lan
9 status wan
10 status vpn
11 status system
12 status switch
13 status switch lan
14 status switch wan
15 status route
16 status route6
Vigor2960>
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
l
l
o
o
g
g
o
o
u
u
t
t
This command is used for logout of current CLI session.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960>logout
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960> logout
login: admin
Password:
Vigor2960>
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
p
p
i
i
n
n
g
g
This command can send ICMP ECHO_REQUEST packets to network host (with IPv4
address).
Vigor2960 Series User’s Guide
508
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960>ping [host] [src_if]
Command Description
[host]
Type the IP address of the host for pinging.
[src_if]
Specify the interface (wan1 or wan2) to execute pinging.
This is optional setting.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960> ping 6
PING 6 (0.0.0.6): 56 data bytes
ping: sendto: Network is unreachable
Send ICMP ECHO_REQUEST packets done.
Vigor2960> ping 8.8.8.8 wan2
PING 8.8.8.8 (8.8.8.8): 56 data bytes
64 bytes from 8.8.8.8: icmp_seq=0 ttl=56 time=11.3 ms
64 bytes from 8.8.8.8: icmp_seq=1 ttl=56 time=10.6 ms
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
p
p
i
i
n
n
g
g
6
6
This command can send ICMP ECHO_REQUEST packets to network host (with IPv6
address).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960>ping6 [host] [src_if] [count] [packetsize] [quiet]
Command Description
[host]
Type the IPv6 address of the host for pinging.
[src_if]
Specify the interface (wan1 or wan2) to execute pinging.
This is optional setting.
[count]
Set the number of the packets for pinging.
[packetsize]
Set the packet size for pinging.
[quiet]
Type “true” to display the pinging result only for all packets.
If this parameter is not used, the pinging result for each packet will be
displayed completely.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>ping6
ping6 [host] [src_if] [count] [packetsize] [quiet]
Vigor2960> ping6 2001:b000:168::1 wan2 3
PING 2001:b000:168::1(2001:b000:168::1) from
2001:b011:700a:1a62:940:1a4d:7eb:1e3a : 56 data bytes
64 bytes from 2001:b000:168::1: icmp_seq=1 ttl=248 time=9.32 ms
64 bytes from 2001:b000:168::1: icmp_seq=2 ttl=248 time=5.50 ms
64 bytes from 2001:b000:168::1: icmp_seq=3 ttl=248 time=5.46 ms
--- 2001:b000:168::1 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2002ms
rtt min/avg/max/mdev = 5.467/6.766/9.328/1.811 ms
Vigor2960 Series User’s Guide
509
Send ICMP ECHO_REQUEST packets done.
Vigor2960>
Vigor2960>
Vigor2960> ping6 2001:b000:168::1 wan2 3 50 true
PING 2001:b000:168::1(2001:b000:168::1) from
2001:b011:700a:1a62:940:1a4d:7eb:1e3a : 50 data bytes
--- 2001:b000:168::1 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2010ms
rtt min/avg/max/mdev = 5.467/5.534/5.588/0.050 ms
Send ICMP ECHO_REQUEST packets done.
Vigor2960>
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
r
r
e
e
s
s
t
t
a
a
r
r
t
t
This command can activate service of DDNS, DHCP, DHCP6, DNS Proxy, FPP, HTTP,
IPsec, PPTPD, SSH and xl2tpd by restarting Vigor router.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960>restart [service]
Command Description
[service]
Type the following string to represent different services:
ddns, dhcp, dhcp6, dns_proxy, fpp, http, ipsec, pptpd, ssh, xl2tpd
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960> restart
Restart [service]
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
t
t
a
a
t
t
u
u
s
s
This command can get current system status related to ARP, conn, conn_num, conntract,
dhcp, firewall, interface, lan, neighbor6, process, route, route6, switch, system, vpn, and
wan.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960>status arp / conn / conn_num /contract / dhcp / firewall / interface / lan /
neighbor6 / process / route / route6 / switch / system / vpn / wan
Command Description
Arp
Display ARP status.
conn
Display conntrack (connection tracking session) for specified
source/destination IP.
conn_num
Display the total session number.
conntract
Display real-time session status.
You can type “ctrl+c” to exit the dialog.
dhcp
Display DHCP active session situation including IP address, start time,
end time, MAC address and Host ID.
firewall
Display current firewall status.
Vigor2960 Series User’s Guide
510
interface
Display information about interface (e.g., eth0, eth2, lan-lan1 and local
loopback).
lan
Display status information for LAN.
neighbor6
Display information about current IPv6 neighbor table.
process
Display process information that Vigor router is performing.
route
Display route information (IPv4).
route6
Display route information (IPv6).
switch
Switch lan – Display current status for switch in LAN port.
Switch wan – Display current status for switch in WAN port.
system
Display basic system status information.
vpn
Display information for VPN connection status.
wan
Display status information for WAN.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960> status arp
IP Address HW Type MAC Address Flags Profile
User
Netbios Name Vendor
192.168.1.10 ether 00:05:5d:e4:d8:ee C lan-lan1
NA
NA D-Link
Vigor2960>status contract
IPTState - IPTables State Top
Version: 2.2.3 Sort: SrcIP b: change sorting h: help
Total States: 176 -- TCP: 116 UDP: 31 ICMP: 3 Other: 1 (Filtered: 25)
Source Destination Interface Protocol State TTL Class
10.10.1.11:43665 108.177.125.188:5228 wan-wan2 tcp ESTABLISHED
0:00:43 Normal
10.10.1.11:43724 216.58.200.232:443 wan-wan2 tcp ESTABLISHED 0:00:46
Normal
10.10.1.11:46635 111.13.142.2:5222 wan-wan2 tcp ESTABLISHED 21:51:50
Normal
10.10.1.11:48702 120.92.96.2:5222 wan-wan2 tcp ESTABLISHED 0:05:55
Normal
10.10.1.11:42280 64.233.188.188:5228 wan-wan2 tcp ESTABLISHED 0:09:08
Normal
10.10.1.11:40372 203.205.151.233:443 wan-wan2 tcp ESTABLISHED 0:09:44
Normal
10.10.1.11:49130 122.248.234.207:8080 wan-wan2 tcp ESTABLISHED
21:34:20 Normal
10.10.1.11:45699 111.13.142.2:5222 wan-wan2 tcp ESTABLISHED 21:09:54
Normal
.
.
Vigor2960> status vpn
VPN Name : ipsec2_out
Remote IP : 1.169.175.175
Virtual Network : 11.11.2.0/24
Algorithm : IPsec/3DES_HMAC_MD5
Vigor2960 Series User’s Guide
511
Up Time : 0 days 6 hours 0 minutes 42 seconds
Transmitted : 2540480 packets
Received : 1568532 packets
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
t
t
r
r
a
a
c
c
e
e
r
r
o
o
u
u
t
t
e
e
This command can print the route packets trace to network host.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960> traceroute [host][src_if]
Command Description
[host]
Type the IPv6 address of the host for pinging.
[src_if]
Specify the interface (wan1 or wan2) to execute pinging.
This is optional setting.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960> traceroute 8.8.8.8 wan2
traceroute to 8.8.8.8 (8.8.8.8) from 172.17.5.194, 30 hops max, 38 byte
packets
1 172.17.5.5 (172.17.5.5) 1.614 ms 1.553 ms 1.374 ms
2 h254.s98.ts.hinet.net (168.95.98.254) 6.257 ms 5.992 ms 5.980
ms
3 sczs-3312.hinet.net (168.95.25.210) 6.103 ms 6.004 ms 245.245
ms
4 sczs-3201.hinet.net (220.128.8.246) 6.294 ms
sczs-3202.hinet.net (220.128.8.254) 6.302 ms sczs-3201.hinet.net
(220.128.8.246) 17.018
ms
5 TPDT-3012.hinet.net (220.128.2.30) 8.072 ms TPDT-3011.hinet.net
(220.128.1.30) 10.666 ms TPDT-3012.hinet.net (220.128.2.150)
11.229 m
s
6 220-128-25-182.hinet-ip.hinet.net (220.128.25.182) 8.257 ms
417.435 ms 10.486 ms
7 220-128-3-34.hinet-ip.hinet.net (220.128.3.34) 9.224 ms
pcpd-3212.hinet.net (220.128.27.77) 8.684 ms pcpd-3211.hinet.net
(220.128.26.7
7) 7.675 ms
8 72.14.202.178 (72.14.202.178) 7.998 ms 72.14.202.34
(72.14.202.34) 9.311 ms pcpd-3211.hinet.net (220.128.26.77) 8.774
ms
9 72.14.202.178 (72.14.202.178) 404.354 ms 72.14.202.34
(72.14.202.34) 8.214 ms 8.213 ms
10 72.14.238.125 (72.14.238.125) 8.662 ms 72.14.238.97
(72.14.238.97) 8.362 ms 108.170.244.129 (108.170.244.129) 13.026 ms
11 216.239.63.75 (216.239.63.75) 8.485 ms
google-public-dns-a.google.com (8.8.8.8) 10.766 ms 339.871 ms
Traceroute done.
Vigor2960#
Vigor2960 Series User’s Guide
512
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
u
u
c
c
i
i
This command is used for RD debug.
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
w
w
d
d
_
_
o
o
f
f
f
f
This command can close watch dog (which is running in default after reboot).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960>wd_off
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960> wd_off
Watch Dog Closed
Vigor2960>
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
e
e
x
x
i
i
t
t
This command can exit telnet command dialog or return to previous command layer.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960>exit
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960> enable
Entering enable mode...
Vigor2960# exit
Leaving enable mode...
Vigor2960>
6
6
.
.
3
3
A
A
v
v
a
a
i
i
l
l
a
a
b
b
l
l
e
e
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
e
e
C
C
o
o
m
m
m
m
a
a
n
n
d
d
s
s
Main parameter settings can be configured only “enable” mode is set first.
Command Description
applications
Settings for DDNS, GVRP, LDAP, OSPF, RIP, SIP ALG, and UPnP can
be configure with this command.
Vigor2960>enable
Vigor2960# configure applications
Vigor2960@config-app#
bandwidth
Settings for access barrier, bandwidth limit profile, session limit profile
can be configured with such command.
Vigor2960>enable
Vigor2960# configure bandwidth
Vigor2960@config-bandwidth#
nat
Settings for address mapping, DMZ, and port redirection can be
configured with such command.
Vigor2960>enable
Vigor2960# configure nat
Vigor2960 Series User’s Guide
513
Vigor2960@config-nat#
object_setting
Settings for File Extension Object, IP Group, IP Object, Keyword
Object, Service Group, Service Object, Time Group, Time Object and
Web Category Object can be configured with such command.
Vigor2960>enable
Vigor2960# configure object
Vigor2960@config-object#
system
Settings for Access Control, Administrator Password, Auto Discovery,
Country Code, Fast Forward Conntrack module monitor, Configuration
Backup and Restore, firmware management, Mail Alert, NTP client ,
System Reboot, SNMP agent, Syslog Server, and TR-069 can be
configured with such command.
Vigor2960>enable
Vigor2960# configure system
Vigor2960@config-sys#
terminal
Settings for LAN and WAN can be configured with such command.
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#
Refer to section 6.4 (WAN) and section 6.5 (LAN) for more detailed
information.
user
Settings for user accounts and user groups can be configured with such
command.
Vigor2960>enable
Vigor2960# configure user
Vigor2960@config-user#
vpn
Settings for LAN to LAN, Remote Dial-In, and Trunk can be configured
with such command.
Vigor2960>enable
Vigor2960# configure vpn
Vigor2960@config-vpn#
Vigor2960 Series User’s Guide
514
6
6
.
.
4
4
W
W
A
A
N
N
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
To make WAN configuration, you have to type “configure terminal” to access into next
phase.
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#
.. Go back to upper layer menu
exit Go back to main menu
lan Configure lan profile
wan Configure wan profile
Vigor2960@config-t# wan
Vigor2960@config-t-wan# ?
.
.
.
There are four functions for WAN – General Setup (command “pf”), Default Route, Load
Balance (including load balancer pool, rule and auto load balance for china) and Switch.
Available sub-commands under WAN include:
- pf (refer to 6.4.1)
- defaultroute (refer to 6.4.2)
- lbpool (refer to 6.4.3)
- autolb (refer to 6.4.4)
- switch (refer to 6.4.5)
- 3g (refer to 6.4.6)
Note:
[XXX XXX] - [ ] means such command is optional. The former is command itself; the
latter is value/selection for such command.
<XXX XXX> - < > means such command is required. The former is command itself;
the latter is value/selection for such command.
6
6
.
.
4
4
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
p
p
f
f
It is used to configure WAN Profile to add or delete the profile or use “show” to get the
profile list in the directory. Enter the profile name to open it and modify the profile directly.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#
Vigor2960@config-t# wan
Vigor2960@config-t-wan# pf add <SectionName>
Vigor2960@config-t-wan# pf delete <SectionName>
Vigor2960@config-t-wan# pf show
Vigor2960@config-t-wan# pf <SectionName>
Command Description
Vigor2960 Series User’s Guide
515
pf add
<SectionName>
Create a new WAN profile (without detailed settings)
<SectionName> - Enter a name (e.g., wan_carrie) for creating a new
WAN profile.
pf delete
<SectionName>
Delete a WAN profile.
<SectionName> - Enter a name (e.g., wan_carrie) to be removed.
pf show
Display configuration on WAN profile.
pf
<SectionName>
Modify a selected WAN profile.
<SectionName> - Enter the name of WAN profile to be modified.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#wan
Vigor2960@config-t-wan# pf add wan_carrie
Vigor2960@config-t-wan-pf-wan_carrie#
Vigor2960@config-t-wan-pf-wan_carrie# ..
Vigor2960@config-t-wan# pf show
interface status desc port proto
proto6 tag vid pvid
wan1 enable WAN1 static
link-local enable 10 0
wan2 enable WAN2 dhcp
link-local enable 11 0
w_carri enable WAN1 none
link-local enable 1 0
wan_carrie disable none
link-local enable 1 0
Vigor2960@config-t-wan#
6
6
.
.
4
4
.
.
1
1
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
p
p
f
f
a
a
d
d
d
d
?
?
To configure detailed settings for a WAN profile, users could use [pf add] to create a new
WAN profile with detailed settings in one line.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-wan# pf add [status status] [desc description] [port
port] [default_mac default_mac][mac macaddr] [proto proto] [mode mode]
[proto6 proto6] [schedule_reconnect schedule_reconnect] [timeobj
timeobj] [tag tag] [vid vid] [pvid pvid] <SectionName>
Command Description
[status status]
Enable or disable the specified WAN profile.
[status] - Enter Enable or Disable.
[desc description]
Make a brief explanation for the WAN profile.
[description] - Enter any words to describe such WAN profile.
[port port]
Specify the interface for the WAN profile.
[port] - Set WAN1 / WAN2 as the interface for network
Vigor2960 Series User’s Guide
516
connection.
[default_mac
default_mac]
Enable / disable the function of specifying the MAC address as
default setting.
[default_mac] - Enter Enable or Disable.
[mac macaddr]
Enter the MAC address.
[macaddr] - Enter the MAC address with the format of
“xx-xx-xx-xx-xx-xx”
[proto proto]
Specify the protocol type for IPv4 connection.
[proto] - Available types contain None / Static / DHCP / PPoE /
PPTP.
[mode mode]
Specify NAT or ROUTE mode on this interface
[mode] - Enter NAT or ROUTING.
[proto6 proto6]
Specify protocol type for IPv6 connection.
[proto6] - Available types contain:
Link_Local
Static
PPP
DHCP_IA_NA
DHCP_IA_PD
[schedule_reconnect
schedule_reconnect]
Enable or disable the function of WAN schedule reconnection.
[schedule_reconnect] - Enter Enable or Disable.
[timeobj timeobj]
Specify a time period for schedule reconnection.
[imeobj] - Specify the time object. Enter the name of the object
profile.
[tag tag]
Enable or disable the function of packet tagging.
[tag] - Specify a VLAN tag for the incoming packet.
[vid vid]
Specify the name of the VLAN ID.
[vid] - Set a number (1 ~ 4095) as VLAN ID.
[pvid pvid]
Specify the priority (0/1/2/3/4/5/6/7) for this VLAN profile.
[pvid] – Available settings include 0/1/2/3/4/5/6/7.
<SectionName>
Enter a name (e.g., wan_carrie) for creating a new WAN profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a WAN profile named with “wan_test”.
Vigor3900>enable
Vigor3900# configure terminal
Vigor3900@config-t#wan
Vigor3900@config-t-wan# pf add status enable wan_test vid 6 pvid 2 proto
none
Vigor3900@config-t-wan-pf-wan_test#
Vigor3900@config-t-wan-pf-wan_test#exit
Vigor3900@config-t-wan#
Vigor2960 Series User’s Guide
517
6
6
.
.
4
4
.
.
1
1
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
c
c
d
d
h
h
o
o
s
s
t
t
Users could use [cdhost] command to configure connection detection hosts of a WAN
profile. Choose the [dhcp] or [static] item and then use [add] or [remove] to set the profile.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-wan-pf-<SectionName># cdhost hdcp add
<dhcp_cd_host>
Vigor2960@config-t-wan-pf-<SectionName># cdhost dhcp remove
<dhcp_cd_host>
Vigor2960@config-t-wan-pf-<SectionName># cdhost static add
<static_cd_host>
Vigor2960@config-t-wan-pf-<SectionName># cdhost static remove
<static_cd_host>
Command Description
cdhost hdcp add
<dhcp_cd_host>
Add DHCP connection detection host to this profile.
<dhcp_cd_host>- Enter the name of WAN profile.
cdhost dhcp remove
<dhcp_cd_host>
Remove DHCP connection detection host from this profile.
<dhcp_cd_host>- Enter the name of WAN profile.
cdhost static add
<static_cd_host>
Add a static connection detection host to this profile.
<static_cd_host>- Enter the name of WAN profile.
cdhost static
remove
<static_cd_host >
Remove a static connection detection host from this profile.
<static_cd_host>- Enter the name of WAN profile.
6
6
.
.
4
4
.
.
1
1
.
.
3
3
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
c
c
o
o
n
n
n
n
e
e
c
c
t
t
/
/
d
d
i
i
s
s
c
c
o
o
n
n
n
n
e
e
c
c
t
t
Users could use [connect] or [disconnect] command to connect or disconnect
DHCP/PPPoE/PPTP network connection for the selected WAN profile.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-wan-pf-<SectionName># connect
Vigor2960@config-t-wan-pf-<SectionName># disconnect
Command Description
<SectionName>
Display the name of WAN profile.
connect
Set the DHCP/PPPoE/PPTP connect ion.
disconnect
Set the DHCP/PPPoE/PPTP disconnection
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#wan
Vigor2960@config-t-wan# pf w_carrie
Vigor2960@config-t-wan-pf-w_carrie#
Vigor2960@config-t-wan-pf-w_carrie# connect
Vigor2960@config-t-wan-pf-w_carrie# disconnect
6
6
.
.
4
4
.
.
1
1
.
.
4
4
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
d
d
n
n
s
s
Vigor2960 Series User’s Guide
518
Users could use this command to configure the DNS server to add or remove DNS server
(based on IPv4).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-wan-pf-<SectionName># dns add <dns>
Vigor2960@config-t-wan-pf-<SectionName># dns remove <dns>
Command Description
<SectionName>
Display the name of WAN profile.
dns add <dns>
Add an IPv4 address for the DNS server.
<dns> - Enter an IPv4 address for DNS server.
dns remove <dns>
Delete the IP address setting for the DNS server.
<dns> - Enter an IPv4 address for DNS server.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#wan
Vigor2960@config-t-wan# pf add w_carrie
Vigor2960@config-t-wan-pf-w_carrie#
Vigor2960@config-t-wan-pf-w_carrie# dns add 192.168.1.89
Vigor2960@config-t-wan-pf-w_carrie# dns remove 192.168.1.89
6
6
.
.
4
4
.
.
1
1
.
.
5
5
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
d
d
n
n
s
s
6
6
Users could use this command to configure the DNS server to add or remove DNS server
(based on IPv6).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-wan-pf-<SectionName># dns6 dhcp6-ia_na add <IPv6
address>
Vigor2960@config-t-wan-pf-<SectionName># dns6
dhcp6-ia_na remove <IPv6
address>
Vigor2960@config-t-wan-pf-<SectionName># dns6
static6 add <IPv6 address>
Vigor2960@config-t-wan-pf-<SectionName># dns6
static6 remove <IPv6
address>
Command Description
<SectionName>
Display the name of WAN profile.
dns6 dhcp6-ia_na
add <IPv6 address>
Add an IPv6 address for the DNS server based on IA-NA type.
<IPv6 address> - Enter an IPv6 address for DNS server.
dns6 dhcp6-ia_na
remove <IPv6
address>
Delete the IPv6 address setting for the DNS server based on
IA-NA type.
<IPv6 address> - Enter an IPv6 address for DNS server.
dns6 static6 add
<IPv6 address>
Add an IPv6 address for the DNS server based on static6 type.
<IPv6 address> - Enter an IPv6 address for DNS server.
dns6 static6 remove
<IPv6 address>
Delete the IPv6 address setting for the DNS server based on static6
type.
Vigor2960 Series User’s Guide
519
<IPv6 address> - Enter an IPv6 address for DNS server.
6
6
.
.
4
4
.
.
1
1
.
.
6
6
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
e
e
x
x
i
i
t
t
Users could use this command to go back to upper level.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-wan-pf-<SectionName># exit
Command Description
<SectionName>
Display the name of WAN profile.
exit
Go back to upper level (e.g., config-t-wan menu).
6
6
.
.
4
4
.
.
1
1
.
.
7
7
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
g
g
e
e
t
t
Users could use this command to display the detailed configuration (including DHCP, IPv6
DHCP IA_NA, global, PPPoE, PPTP, Static, IPv6 Static and so on) information of the
selected profile
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-wan-pf-<SectionName># get
Vigor2960@config-t-wan-pf-<SectionName>#get dhcp
Vigor2960@config-t-wan-pf-<SectionName>#get dhcp6_ia_na
Vigor2960@config-t-wan-pf-<SectionName>#get dmz
Vigor2960@config-t-wan-pf-<SectionName>#get global
Vigor2960@config-t-wan-pf-<SectionName>#get pppoe
Vigor2960@config-t-wan-pf-<SectionName>#get static
Vigor2960@config-t-wan-pf-<SectionName>#get static6
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a WAN profile named with “w_carrie”.
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#wan
Vigor2960@config-t-wan# pf add w_carrie
Vigor2960@config-t-wan-pf-w_carrie#
Vigor2960@config-t-wan-pf-w_carrie# get dhcp
hostname :
ipalias :
mtu : 1500
cdmode : arp
cdhost :
cdint : 10
cdretry : 3
dhcp_vendor_class_id:
dhcp_client_id_label :
dhcp_client_id :
dhcp_client_id_pass :
user_dns_status : disable
user_dns :
Vigor2960@config-t-wan-pf-w_carrie#
Vigor2960@config-t-wan-pf-w_carrie# get global
Vigor2960 Series User’s Guide
520
status : Disable
wan4_dmz_status : Disable
desc :
port :
default_mac : Enable
mac : 00:50:7f:7b:83:01
proto : None
mode : NAT
proto6 : Link_Local
schedule_reconnect : Disable
timeobj :
tag : Disable
vid : 1
pvid : 0
Vigor2960@config-t-wan-pf-w_carrie#
6
6
.
.
4
4
.
.
1
1
.
.
8
8
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
i
i
p
p
a
a
l
l
i
i
a
a
s
s
Use this command to configure the IP alias address. Choose the [dhcp] or [static] item and
use [add] or [remove] to set this profile.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-wan-pf-<SectionName># ipalias dhcp add
<dhcp_ipalias>
Vigor2960@config-t-wan-pf-<SectionName># ipalias dhcp remove
<dhcp_ipalias>
Vigor2960@config-t-wan-pf-<SectionName># ipalias static add <IP
address>
Vigor2960@config-t-wan-pf-<SectionName># ipalias static remove <IP
address>
Command Description
<SecionName>
Display the name of the profile.
ipalias dhcp add
<dhcp_ipalias>
Add an IP alias, based on DHCP type, to the selected profile.
<dhcp_ipalias> - Enter an IPv4 address for the WAN profile.
In which, the format for IP address is “AAA.BBB.CCC.DDD”
where each part is in the range 0-255. Mask number ranges from
0 to 32.
ipalias dhcp remove
<dhcp_ipalias>
Remove an IP alias to/from the selected profile.
<dhcp_ipalias>- Specify an IPv4 address for the WAN profile.
ipalias static add
<static_ipalias>
Add an IP alias, based on static IP type, to the selected profile.
<static_ipalias> - Specify an IPv4 address for the WAN profile.
ipalias static remove
<static_ipalias>
Remove an IP alias, based on static IP type, to the selected
profile.
<static_ipalias> - Specify an IPv4 address for the WAN profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#wan
Vigor2960 Series User’s Guide
521
Vigor2960@config-t-wan# pf w_carrie
Vigor2960@config-t-wan-pf-w_carrie#
Vigor2960@config-t-wan-pf-w_carrie# ipalias dhcp add 192.168.1.56/32
Vigor2960@config-t-wan-pf-w_carrie#
6
6
.
.
4
4
.
.
1
1
.
.
9
9
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
t
t
It is used for reviewing the detailed settings (including DHCP, IPv6 DHCP IA_NA, DMZ,
global, PPPoE, Static, IPv6 Static and so on) or modifying settings for the selected profile.
S
S
y
y
n
n
t
t
a
a
x
x
f
f
o
o
r
r
s
s
e
e
t
t
D
D
H
H
C
C
P
P
p
p
r
r
o
o
f
f
i
i
l
l
e
e
Use [set dhcp] command to configure the DHCP WAN profile in details.
Vigor2960@config-t-wan-pf-<SectionName># set dhcp [hostname
dhcp_hostname] [ipalias dhcp_ipalias] [mtu dhcp_mtu]
[cdmodedhcp_cd_mode] [cdhost dhcp_cd_host] [cdint dhcp_cd_interval]
[cdretry dhcp_cd_retry] [dhcp_vendor_class_id dhcp_vendor_class_id]
[dhcp_client_id dhcp_client_id] [dhcp_client_id_pass
dhcp_client_id_pass] [user_dns_status user_dns_status] [user_dns
user_dns]
Command Description
<SectionName>
Display the name of the WAN profile.
[hostname
dhcp_hostname]
Specify an IP address for DHCP server.
[dhcp_hostname] - Enter a name for DHCP server.
[ipalias
dhcp_ipalias]
Specify an IP alias address for DHCP server.
[dhcp_ipalias] - Enter the IP alias address with mask number as
the DHCP server (e.g., 192.168.1.56/32).
In which, the format for IP address is “AAA.BBB.CCC.DDD”
where each part is in the range 0-255. Mask number ranges from 0
to 32.
[mtu dhcp_mtu]
Set MTU/MRU value (max. 1500) for DHCP server.
[dhcp_mtu] - Ranges from 1~ 1500.
[cdmodedhcp_cd_m
ode]
Set connection detection mode (None/ARP/PING/HTTP) for
DHCP server.
[dhcp_cd_mode] - Available modes include None, ARP, PING,
and HTTP.
[cdhost
dhcp_cd_host]
Set connection detection host for DHCP server.
[dhcp_cd_host]- Enter a name for the host.
[cdint
dhcp_cd_interval]
Set connection detection interval for DHCP server.
[dhcp_cd_interval]- Ranges from 0 to 65535.
[cdretry
dhcp_cd_retry]
Set connection detection retry for DHCP server.
[dhcp_cd_retry]- Enter any number.
[dhcp_vendor_class
_id
dhcp_vendor_class_
id]
Set vendor class ID for DHCP server.
[dhcp_vendor_class_id] - Enter a string.
Vigor2960 Series User’s Guide
522
[dhcp_client_id
dhcp_client_id]
Set the user name for DHCP client.
[dhcp_client_id] - Enter username for DHCP client.
[dhcp_client_id_pas
s
dhcp_client_id_pass
]
Set a password for DHCP client.
[dhcp_client_id_pass] - Enter a password for DHCP client.
[user_dns_status
user_dns_status]
Enable / disable the function of DNS settings configuration.
[user_dns_status] - Enter Enable or Disable.
[user_dns user_dns]
Specify DNS Settings.
[user_dns] - Enter the IP address of DNS server.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#wan
Vigor2960@config-t-wan# pf wan1
Vigor2960@config-t-wan-pf-wan1# set dhcp cdmode ARP
set done
Vigor2960@config-t-wan-pf-wan1# set dhcp mtu 1500
set done
Vigor2960@config-t-wan-pf-wan1# set dhcp cdint 10
set done
Vigor2960@config-t-wan-pf-wan1# set dhcp dhcp_vendor_class_id
draytek
set done
Vigor2960@config-t-wan-pf-wan1# set dhcp user_dns_status enable
set done
Vigor2960@config-t-wan-pf-wan1# set dhcp ipalias 192.168.1.56/32
set done
Vigor2960@config-t-wan-pf-wan1# ipalias dhcp add 192.168.1.100/32
Vigor2960@config-t-wan-pf-wan1# ipalias dhcp add 192.168.1.200/32
Vigor2960@config-t-wan-pf-wan1# ipalias dhcp add 192.168.1.155/32
Vigor2960@config-t-wan-pf-wan1# get dhcp
hostname :
ipalias : 192.168.1.10/32, 192.168.1.100/32,
192.168.1.200/32, 192.
168.1.155/32
mtu : 1500
cdmode : ARP
cdhost :
cdint : 10
cdretry : 3
dhcp_vendor_class_id : draytek
dhcp_client_id_label :
dhcp_client_id :
Vigor2960 Series User’s Guide
523
dhcp_client_id_pass :
user_dns_status : Enable
user_dns :
Vigor2960@config-t-wan-pf-wan1# set dhcp ipalias 192.168.1.250/32
set done
Vigor2960@config-t-wan-pf-wan1# get dhcp
hostname :
ipalias : 192.168.1.250/32
mtu : 1500
cdmode : ARP
cdhost :
cdint : 10
cdretry : 3
dhcp_vendor_class_id : draytek
dhcp_client_id_label :
dhcp_client_id :
dhcp_client_id_pass :
user_dns_status : Enable
user_dns :
Vigor2960@config-t-wan-pf-wan1#
S
S
y
y
n
n
t
t
a
a
x
x
f
f
o
o
r
r
s
s
e
e
t
t
g
g
l
l
o
o
b
b
a
a
l
l
p
p
r
r
o
o
f
f
i
i
l
l
e
e
Use [set global] command to configure the global profile in details.
Vigor2960@config-t-wan-pf-<SectionName># set global [status status]
[desc description][port port] [default_mac default_mac] [mac macaddr]
[proto proto] [mode mode] [proto6 proto6] [schedule_reconnect
schedule_reconnect] [timeobj timeobj] [tag tag] [vid vid] [pvid pvid]
Command Description
<SectionName>
Display the name of the WAN profile.
[status status]
Enable or disable the WAN profile.
[status] - Enter Enable or Disable.
[desc description]
Give a brief description for WAN profile.
[description] - Type the description in this field.
[port port]
Specify the physical port.
[port] – Available settings include WAN1, WAN2.
[default_mac
default_mac]
Enable or disable the default MAC setting.
[default_mac] - Enter Enable or Disable.
[mac macaddr]
Specify a MAC address for WAN profile.
[macaddr] - Enter the MAC address in this field.
[proto proto]
Specify an IPv4 protocol type for WAN profile.
[proto] - Available types include None, Static, DHCP, PPPoE,
PPTP.
[mode mode]
Specify NAT or Routing mode for the interface.
[mode] – Available modes include NAT, Routing.
Vigor2960 Series User’s Guide
524
[proto6 proto6]
Specify an IPv6 protocol type for WAN profile.
[proto6] - Available types include Link Local, Static, PPP,
DHCP-IA NA, DHCP-IA PD.
[schedule_reconnect
schedule_reconnect]
Enable / disable the function of WAN reconnection based on
schedule.
[schedule_reconnect]- Enter Enable or Disable.
[timeobj timeobj]
If [schedule_reconnect] is enabled, specify a time object profile.
[timeobj] – Enter the name of the time object.
[tag tag]
Enable /disable the function to bring VLAN tag when egress.
[tag] - Enter Enable or Disable.
[vid vid]
Specify a VLAN ID for WAN profile.
[vid] - Ranges from 1 to 4095.
[pvid pvid]
Specify the priority for the VLAN ID.
[vid] - Ranges from 0 to 7.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#wan
Vigor2960@config-t-wan# pf wan1
Vigor2960@config-t-wan-pf-wan1#
Vigor2960@config-t-wan-pf-wan1# set global status enable
set done
Vigor2960@config-t-wan-pf-wan1# set global desc global_test_file
set done
Vigor2960@config-t-wan-pf-wan1# set global vid 20
set done
Vigor2960@config-t-wan-pf-wan1# set global default_mac enable
set done
Vigor2960@config-t-wan-pf-wan1# set global proto DHCP
set done
Vigor2960@config-t-wan-pf-wan1#
S
S
y
y
n
n
t
t
a
a
x
x
f
f
o
o
r
r
s
s
e
e
t
t
P
P
P
P
P
P
o
o
E
E
p
p
r
r
o
o
f
f
i
i
l
l
e
e
Use [set pppoe] command to configure the PPPoE WAN profile in details.
Vigor2960@config-t-wan-pf-<SectionName># set pppoe [username
pppoe_username] [password pppoe_password] [mtu pppoe_mtu] [service_name
service_name] [debug pppoe_debug] [always_on pppoe_always_on] [fixed_ip
pppoe_fixed_ip] [fixed_ip_address pppoe_fixed_ip_address] [cdmode
pppoe_cd_mode] [cdhost pppoe_cd_host] [cdint pppoe_cd_interval]
Vigor2960 Series User’s Guide
525
[cdretry pppoe_cd_retry] [ipalias pppoe_ipalias] [user_dns_status
user_dns_status] [user_dns user_dns]
Command Description
<SectionName>
Display the name of the WAN profile.
[username
pppoe_username]
Specify a username for PPPoE connection.
[pppoe_username] - Define a name in this field.
[password
pppoe_password]
Specify a password for the PPPoE connection.
[pppoe_password] - Define the password in this field.
[mtu pppoe_mtu]
Set MTU/MRU value for PPPoE connection.
[pppoe_mtu] - Ranges from 1 to 1500.
[service_name
service_name]
It is optional setting.
[service_name] – Enter the name of the service.
[debug
pppoe_debug]
Enable / disable the PPPoE debug action.
[pppoe_debug] - Enter Enable or Disable.
[always_on
pppoe_always_on]
Enable /disable the function of “always on” for PPPoE
connection.
[pppoe_always_on] - Enter Enable or Disable.
[fixed_ip
pppoe_fixed_ip]
Enable /disable the function of Fixed IP for PPPoE connection.
[pppoe_fixed_ip] - Enter Enable or Disable.
[fixed_ip_address
pppoe_fixed_ip_add
ress]
Specify a fixed IP.
[pppoe_fixed_ip_address] – Enter the IP address.
[cdmode
pppoe_cd_mode]
Specify the detection mode for PPPoE connection.
[pppoe_cd_mode] – Available settings include
None
PING
HTTP
[cdhost
pppoe_cd_host]
Specify the IP address as connection detection host.
[pppoe_cd_host] – Enter the IP address.
[cdint
pppoe_cd_interval]
Set connection detection interval for PPPoE connection.
[pppoe_cd_interval] - Ranges from
0 to 65535.
[cdretry
pppoe_cd_retry]
Set connection detection retry for PPPoE connection.
[pppoe_cd_retry] - Enter a number.
[ipalias
pppoe_ipalias]
Set an IP alias address for PPPoE connection.
[pppoe_ipalias] - Enter an IP address.
[user_dns_status
user_dns_status]
Enable / disable the function of defining a DNS server.
[user_dns_status] – Enter Enable or Disable.
[user_dns user_dns]
Specify an IP address as DNS server.
[user_dns]- Enter an IP address.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960 Series User’s Guide
526
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#wan
Vigor2960@config-t-wan# pf wan1
Vigor2960@config-t-wan-pf-wan1#
Vigor2960@config-t-wan-pf-wan1# set pppoe username marketing_test
set done
Vigor2960@config-t-wan-pf-wan1# set pppoe password marketing_123
set done
S
S
y
y
n
n
t
t
a
a
x
x
f
f
o
o
r
r
s
s
e
e
t
t
S
S
t
t
a
a
t
t
i
i
c
c
p
p
r
r
o
o
f
f
i
i
l
l
e
e
Use [set static] command to configure the static IP profile in details.
Vigor2960@config-t-wan-pf-<SectionName># set static [ipaddr
static_ipaddress] [mask static_mask] [gateway static_gateway] [dns
static_dns] [ipalias static_ipalias] [mtu static_mtu] [cdmode
static_cd_mode] [cdhost static_cd_host] [cdint static_cd_interval]
[cdretry static_cd_retry]
Command Description
<SectionName>
Display the name of the WAN profile.
[ipaddr
static_ipaddress]
Specify an IP address.
[static_ipaddress] - Define an IPv4 address in this field.
[mask static_mask]
Specify the net mask address.
[static_mask] - Define the net mask address for such profile.
[gateway
static_gateway]
Specify the IPv4 address as the gateway.
[static_gateway] - Define an IPv4 address as the gateway.
[dns static_dns]
Specify an IP address as DNS server.
[static_dns] - Define an IPv4 address for the DNS server.
[ipalias
static_ipalias]
Set an IP alias address for static connection.
[static_ipalias] - Enter an IP address.
[mtu static_mtu]
Set MTU/MRU value for static connection.
[static_mtu] - Ranges from 1 to 1500.
[cdmode
static_cd_mode]
Set connection detection mode (ARP/PING/HTTP).
static_cd_mode] - Available modes include ARP, PING, and
HTTP.
[cdhost
static_cd_host]
Set a static connection detection host.
[static_cd_host]- Type a name for the host.
[cdint
static_cd_interval]
Set connection detection interval for static connection.
[static_cd_interval] - Ranges from
0 to 65535.
[cdretry
static_cd_retry]
Set connection detection retry for static connection.
[static_cd_retry] - Enter a number.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960 Series User’s Guide
527
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#wan
Vigor2960@config-t-wan# pf wan1
Vigor2960@config-t-wan-pf-wan1#
Vigor2960@config-t-wan-pf-wan1# set static ipaddr 192.168.1.126
set done
Vigor2960@config-t-wan-pf-wan_carrie# set static cdint 65535
set done
Vigor2960@config-t-wan-pf-wan_carrie#
S
S
y
y
n
n
t
t
a
a
x
x
f
f
o
o
r
r
s
s
e
e
t
t
S
S
t
t
a
a
t
t
i
i
c
c
6
6
p
p
r
r
o
o
f
f
i
i
l
l
e
e
Use [set static6] command to configure the static IPv6 profile in details.
Vigor2960@config-t-wan-pf-<SectionName># set static6 [ip6addr
static_ip6address] [ip6length static_ip6length] [gateway6
static_gateway6] [dns6 static_dns6]
Command Description
<SectionName>
Display the name of the WAN profile.
[ip6addr
static_ip6address]
Specify an IPv6 address.
[static_ipaddress] - Define an IPv4 address in this field.
[ip6length
static_ip6length]
Specify the prefix length for the IPv6 address.
[static_ip6length] - Define the prefix length for IPv6 address.
[gateway6
static_gateway6]
Specify the IPv6 address as the gateway.
[static_gateway6] - Define an IPv6 address as the gateway.
[dns6 static_dns6]
Specify an IPv6 address as DNS server.
[static_dns6] - Define an IPv6 address for the DNS server.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#wan
Vigor2960@config-t-wan# pf wan1
Vigor2960@config-t-wan-pf-wan1#
Vigor2960@config-t-wan-pf-wan1# set static6 ip6addr
FE80::0202:B3FF:FE1E:8329
set done
Vigor2960@config-t-wan-pf-wan1#
6
6
.
.
4
4
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
d
d
e
e
f
f
a
a
u
u
l
l
t
t
r
r
o
o
u
u
t
t
e
e
It is used to configure default route profile. Use “set” to configure detailed settings for
default route. Then use “get” to get the profile list in the directory.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960 Series User’s Guide
528
Vigor2960@config-t-wan# defaultroute get
Vigor2960@config-t-wan# defaultroute set [pool lb_pool] [auto_lb
auto_lb] [ct_rt ct_rt] [session_rt_excp session_rt_excp]
Command Description
get
Get the configuration of default route.
set
Modify the settings of default route.
[pool lb_pool]
Set the load balance pool for a wan profile.
[lb_pool] - Enter the name of the WAN profile (e.g., w_carrie) /
WAN interface (e.g., WAN1/USB1).
[auto_lb auto_lb]
Enable or disable the Auto Failover to Active WANs.
[auto_lb] - Enter Enable or Disable.
[ct_rt ct_rt]
Specify the load balance mode.
[cr_rt] - Enter IP_Based or Session_Based.
[session_rt_excp
session_rt_excp]
Specify the service type object profile to be excluded.
[session_rt_excp] – Enter the name of the service type object.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#wan
Vigor2960@config-t-wan# defaultroute get
pool : default_pool
auto_lb : Enable
ct_rt : 0
session_rt_excp : HTTPS, IKE, IPSecNAT
Vigor2960@config-t-wan# defaultroute set pool wan1
set done
6
6
.
.
4
4
.
.
3
3
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
l
l
b
b
p
p
o
o
o
o
l
l
Use this command to add or delete Load Balance Pool profile or use “get” to get the profile
list in the directory. Enter the profile name to open it and modify the profile directly.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-wan# lbpool add <SectionName>
Vigor2960@config-t-wan# lbpool delete <SectionName>
Vigor2960@config-t-wan# lbpool show
Vigor2960@config-t-wan# lbpool <SectionName>
Command Description
lbpool add
<SectionName>
Add a new load balance pool profile.
<SectionName> - Enter the name (e.g., lb_carrie) of the balance
pool profile.
lbpool delete
<SectionName>
Delete a selected balance pool profile.
<SectionName> - Enter the name of the load balance pool profile.
Vigor2960 Series User’s Guide
529
lbpool show
Display the setting status of the load balance pool profile.
lbpool
<SectionName>
Modify settings for the selected profile.
<SectionName> - Enter the name of the load balance pool profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a load balance profile named with “lb_carrie”.
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#wan
Vigor2960@config-t-wan# lbpool add lb_carrie
Vigor2960@config-t-wan# lbpool show
6
6
.
.
4
4
.
.
3
3
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
l
l
b
b
p
p
o
o
o
o
l
l
a
a
d
d
d
d
?
?
To configure detailed settings for a load balance pool profile, users could use [lbpool add] to
create a new profile with detailed settings.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-wan# lbpool add [mode mode] [lbif lb_iface] [primary
primary_pf] [backup backup_pf] <SectionName>
Command Description
[mode mode]
Set a load balance mode for such profile.
[mode] – Available settings include:
Load_Balance
Backup
[lbif lb_iface]
Specify an interface for such load balance profile.
[lb_iface] - Name of the WAN profile (e.g., wan1, wan4, w_carrie).
[primary
primary_pf]
Specify a primary profile from existed WAN profile (e.g.,
w_carrie).
[primary_pf] - Enter the name for the load balance pool profile
which is going to be as the primary profile.
[backup backup_pf]
Specify a backup profile from existed WAN profile (e.g., w_david).
[backup_pf] - Enter the name for the load balance pool profile
which is going to be as the backup profile.
<SectionName>
<SectionName> - Enter the name (e.g., lb_carrie) of the balance
pool profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a load balance profile named with “lb_carrie”.
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#wan
Vigor2960@config-t-wan# lbpool add mode backup lb_carrie
Vigor2960@config-t-wan-lb-pool-lb_carrie#
Vigor2960@config-t-wan-lb-pool-lb_carrie# get
mode : Backup
lbif :
Vigor2960 Series User’s Guide
530
primary :
backup :
Vigor2960@config-t-wan-lb-pool-lb_carrie#
6
6
.
.
4
4
.
.
3
3
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
t
t
,
,
g
g
e
e
t
t
,
,
a
a
d
d
d
d
,
,
r
r
e
e
m
m
o
o
v
v
e
e
It is used for reviewing the detailed settings or modifying settings for the selected load
balance pool profile (e.g., lb_carrie).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-wan-lbpool-<SectionName># get
Vigor2960@config-t-wan-lbpool-
<SectionName># set [mode mode] [lbif
lb_iface] [primary primary_pf] [backup backup_pf]
Vigor2960@config-t-wan-lbpool-
<SectionName># add <lb_iface>
<lb_iface_weight>
Vigor2960@config-t-wan-lbpool-
<SectionName># remove [lbif lb_iface]
<lb_iface_weight>
Command Description
<SectionName>
Display the name of the load balance pool profile.
get
Get the configuration of load balance pool.
set
Modify the settings of load balance pool.
[mode mode]
Set a load balance mode for such profile.
[mode] – Available settings include:
Load_Balance
Backup
[lbif lb_iface]
Specify an interface for such load balance profile.
[lb_iface] - Name of the WAN profile (e.g., wan1, wan4, w_carrie).
[primary
primary_pf]
Specify a primary profile from existed WAN profile (e.g.,
w_carrie).
[primary_pf] - Enter the name for the load balance pool profile
which is going to be as the primary profile.
[backup backup_pf]
Specify a backup profile from existed WAN profile (e.g., w_david).
[backup_pf] - Enter the name for the load balance pool profile
which is going to be as the backup profile.
add <lb_iface>
Specify an interface for such load balance profile.
<lb_iface> - Name of the WAN profile (e.g., wan1, wan4,
w_carrie).
add
<lb_iface_weight>
Specify the weight value for the selected load balance interface.
<lb_iface_weight> - Ranges from 1 to 5.
remove [lbif
lb_iface]
<lb_iface_weight>
Delete an interface / weight value for such load balance profile.
<lb_iface> - Name of the WAN profile (e.g., wan1, wan4,
w_carrie).
<lb_iface_weight> - Ranges from 1 to 5.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960 Series User’s Guide
531
In this example, we create a load balance profile named with “lb_carrie”.
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#wan
Vigor2960@config-t-wan# lbpool add lb_carrie
Vigor2960@config-t-wan# lbpool show
lb-pool mode lbif primary backup
default_pool loadbalance wan1 1 wan2 1 wan3 1 wan4 1 wan5 1
usb1 1 usb
2 1
lb_carrie loadbalance
Vigor2960@config-t-wan# lbpool lb_carrie
Vigor2960@config-t-wan-lb-pool-lb_carrie# set mode Load_Balance lbif
wan1 primary w_carrie
Set done
Vigor2960@config-t-wan-lb-pool-lb_carrie# set backup w_david
Set done
Vigor2960@config-t-wan-lb-pool-lb_carrie# add wan2 400
Vigor2960@config-t-wan-lb-pool-lb_carrie#
Vigor2960@config-t-wan-lb-pool-lb_carrie# get
mode : Load_Balance
lbif : wan1, wan2 400
primary : w_carrie
backup : w_david
Vigor2960@config-t-wan-lb-pool-lb_carrie#
6
6
.
.
4
4
.
.
4
4
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
a
a
u
u
t
t
o
o
l
l
b
b
Use this command to set Auto Load Balance profile or use “get” to get the profile list in the
directory.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-wan# autolb get
Vigor2960@config-t-wan# autolb set [status status] [telecom
telecom_pool] [cnc cnc_pool] [default default_pool]
Command Description
get
Get the configuration of auto load balance.
set
Modify the settings of auto load balance.
[status status]
Enable or disable the function of auto load balance.
[status] - Type Enable or Disable.
[telecom
telecom_pool]
Specify a WAN profile / load balance pool for China telecom.
[telecom_pool] - Name of the WAN profile (e.g., wan1, wan4,
wan_carrie) or profile name defined in load balance pool.
[cnc cnc_pool]
Specify a WAN profile / load balance pool for China CNC.
[cnc_pool]- Name of the WAN profile (e.g., wan1, wan4,
wan_carrie) or profile name defined in load balance pool.
Vigor2960 Series User’s Guide
532
[default
default_pool]
Specify a WAN profile / load balance pool as default setting for
China.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#wan
Vigor2960@config-t-wan#
Vigor2960@config-t-wan# autolb get
status : Disable
telecom : wan1
cnc : wan1
default : wan1
Vigor2960@config-t-wan#
6
6
.
.
4
4
.
.
5
5
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
w
w
i
i
t
t
c
c
h
h
Use this command to set switch profile, then type [vlan] command to configure the details.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-wan-switch# vlan add <vlan_id>
Vigor2960@config-t-wan-switch# vlan delete <vlan_id>
Vigor2960@config-t-wan-switch# vlan show
Vigor2960@config-t-wan-switch-<vlan_id># get
Vigor2960@config-t-wan-switch-<vlan_id># member add <member>
Vigor2960@config-t-wan-switch-<vlan_id># member remove <member>
Vigor2960@config-t-wan-switch-<vlan_id># untag add <untag>
Vigor2960@config-t-wan-switch-<vlan_id># untag remove <untag>
Command Description
vlan add <vlan_id>
Add a new switch VLAN profile.
<vlan_id> - Available number is from 1 to 多少?
vlan delete
<vlan_id>
Specify an interface for switch profile.
<vlan_id> - Available number is from 1 to 多少?
vlan show
Display current settings status.
get
Display configuration information for the selected switch VLAN
profile.
member add
<member>
Specify the interface for switch VLAN profile.
<member> - Enter WAN1 or WAN2.
member remove
<member>
Delete the interface from such switch VLAN profile.
<member> - Enter WAN1 or WAN2.
untag add
<member>
Select the interface to be untagged for switch VLAN profile.
<member> - Enter WAN1 or WAN2.
untag remove
<member>
Delete the untagged interface from such switch VLAN profile.
<member> - Enter WAN1 or WAN2.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960 Series User’s Guide
533
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#wan
Vigor2960@config-t-wan# switch
Vigor2960@config-t-wan-switch#
Vigor2960@config-t-wan-switch# vlan show
vlanid member untag
10 1 1
11 2 2
1 1 1
Vigor2960@config-t-wan-switch#
6
6
.
.
4
4
.
.
6
6
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
3
3
g
g
Use this command to display the status of 3G USB connection and configure detailed
settings for 3G connection.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor3900@config-t-wan# 3g show
Vigor3900@config-t-wan-3g-<SectionName># get
Vigor3900@config-t-wan-3g-<SectionName># set [status status] [desc
description] [port port] [proto proto] [cdmode cd_mode] [cdhost cd_host]
[cdint cd_interval] [cdretry cd_retry] [pincode pincode] [init_string1
modem_init_string_1] [init_string2 modem_init_string_2] [apn apn]
[dial_string modem_dial_string] [username ppp_username] [password
ppp_password] [4g_pincode 4g_pincode] [4g_net_mode 4g_net_mode] [4g_apn
4g_apn]
Command Description
3g show
Display the status for 3G USB.
3g
<SectionName>
Specify a USB port for configuration.
<SectionName> - Enter “usb1” or “usb2”.
get
Display configuration information for the selected switch VLAN
profile.
set
Modify the settings for 3G USB connection.
[status status]
Enable / disable the USB WAN profile.
[status] – Enter Enable or Disable.
[desc description]
Give the brief description for such profile.
[description] – Enter the description.
[proto proto]
Specify the connection mode for such USB WAN.
[proto] – Available settings are:
3G/4G_PPP
4G_DHCP
[cdmode cd_mode]
Specify the connection detection mode.
[cd_mode] - Available settings are:
None
PING
HTTP
Vigor2960 Series User’s Guide
534
[cdhost cd_host]
Specify the IP address as connection detection host.
[cd_host] – Enter the IP address.
[cdint cd_interval]
Assign an interval period of time for each detecting.
[cd_interval] – Enter a number (unit is second).
[cdretry cd_retry]
Assign detecting times to ensure the connection of the WAN
interface.
[cd_retry] - Enter a number.
[pincode pincode]
Specify the SIM card PIN code for accessing Internet.
[pincode]- Enter the PIN code of the SIM card.
[init_string1
modem_init_string_
1]
Such value can initialize USB modem.
[modem_init_string_1] – Contact your ISP for getting the right
value.
[init_string2
modem_init_string_
2]
The initial string 1 is shared with APN. In some cases, user may
need another initial AT command to restrict 3G band or do any
special settings. Contact your ISP for getting the right value.
[apn apn]
[apn] – Enter the name of APN (provided by ISP).
[dial_string
modem_dial_string]
It is used to dial through USB mode.
[modem_dial_string] – Contact your ISP for getting the right
value.
[username
ppp_username]
PPP Username.
[ppp_username]- Enter the name.
[password
ppp_password]
PPP Password.
[ppp_password] – Enter the password.
[4g_pincode
4g_pincode]
When 4G_DHCP is specified as connection mode, use such
command to specify the SIM card PIN code for accessing Internet.
[pincode]- Enter the PIN code of the SIM card.
[4g_net_mode
4g_net_mode]
When 4G_DHCP is specified as connection mode, use such
command to set the network connection mode for USB 4G.
4G/3G/2G
4G?Only
3G?Only
2G?Only
[4g_apn 4g_apn]
[apn] – Enter the name of APN (provided by ISP).
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor3900>enable
Vigor3900# configure terminal
Vigor3900@config-t#wan
Vigor3900@config-t-wan# 3g usb1
Vigor3900@config-t-wan# usb1
Vigor3900@config-t-wan-3g-usb1# get
status : Disable
desc :
proto : 3G/4G_PPP
cdmode : none
Vigor2960 Series User’s Guide
535
cdhost :
cdint : 10
cdretry : 3
pincode :
init_string1 : AT&F
init_string2 : ATE0V1X1&D2&C1S0=0
apn : internet
dial_string : ATDT*99#
username :
password :
4g_pincode :
4g_net_mode : 0
4g_apn : internet
Vigor3900@config-t-wan-3g-usb1# set status enable
set done
Vigor3900@config-t-wan-3g-usb1# get
status : Enable
desc :
proto : 3G/4G_PPP
cdmode : none
cdhost :
cdint : 10
cdretry : 3
pincode :
init_string1 : AT&F
init_string2 : ATE0V1X1&D2&C1S0=0
apn : internet
dial_string : ATDT*99#
username :
password :
4g_pincode :
4g_net_mode : 4G/3G/2G
4g_apn : internet
6
6
.
.
5
5
L
L
A
A
N
N
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
LAN (Local Area Network) is a group of subnets regulated and ruled by router. The design
of network structure is related to what type of public IP addresses coming from your ISP.
Vigor2960 provides many functions in LAN – users could use the commands below to set up
the details.
To make LAN configuration, you have to type “
configure terminal” to access into next
phase.
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#
.. Go back to upper layer menu
exit Go back to main menu
lan Configure lan profile
wan Configure wan profile
Vigor2960@config-t# lan
Vigor2960@config-t-lan# ?
.
.
Vigor2960 Series User’s Guide
536
.
There are several functions for WAN – General Setup (command “pf”), Inter-LAN Route, IP
Bind MAC, IP Routing, Route/Route 6 and Switch.
Available sub-commands under LAN include:
- ipbindmac (refer to 6.5.1)
- iprouting (refer to 6.5.2)
- pf (refer to 6.5.3)
- route (refer to 6.5.4)
- route6 (refer to 6.5.5)
- switch (refer to 6.5.6)
Note:
[XXX XXX] - [ ] means such command is optional. The former is command itself; the
latter is value/selection for such command.
<XXX XXX> - < > means such command is required. The former is command itself;
the latter is value/selection for such command.
6
6
.
.
5
5
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
i
i
p
p
b
b
i
i
n
n
d
d
m
m
a
a
c
c
Users could use [ipbindmac] command to configure IP Bind MAC. Before using such
command, create a LAN profile (e.g., bind_carrie) first.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-lan#ipbindmac add <ProfileName>
Vigor2960@config-t-lan#ipbindmac delete <ProfileName>
Vigor2960@config-t-lan#ipbindmac show
Vigor2960@config-t-lan#ipbindmac show <ProfileName>
Vigor2960@config-t-lan#ipbindmac <Profile>
Vigor2960@config-t-lan#ipbindmac get
Command Description
ipbindmac add
<ProfileName>
Add a new IP Bind MAC profile.
<ProfileName> - Enter the name of IP Bind MAC profile.
ipbindmac delete
<ProfileName>
Remove a selected IP Bind MAC profile.
<ProfileName> - Enter the name (e.g., bind_carrie) of IP Bind
MAC profile to be deleted.
Ipbindmac show
Display the address (IP/MAC) information for the profiles.
ipbindmac show
<ProfileName>
Display the address (IP/MAC) information of selected IP Bind
MAC profile.
<ProfileName> - Enter the name (e.g., bind_carrie) of IP Bind
MAC profile.
ipbindmac
<ProfileName>
Modify detailed settings for the selected profile.
<ProfileName> - Enter the name (e.g., bind_carrie) of s IP Bind
MAC profile to be modified.
ipbindmac get
Display the status for all IP Bind MAC profiles.
Vigor2960 Series User’s Guide
537
6
6
.
.
5
5
.
.
1
1
.
.
1
1
T
T
e
e
l
l
e
e
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
i
i
p
p
b
b
i
i
n
n
d
d
m
m
a
a
c
c
a
a
d
d
d
d
?
?
To configure detailed settings for an IP bind MAC profile, users could use [ipbindmac add]
to create a new profile with detailed settings.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-lan#ipbindmac add [ip ip] [macaddr macaddr] [comment
comment] <ProfileName>
Command Description
add
Add a new IP Bind MAC profile.
[ip ip]
[IP] - Define an IPv4 address in this field.
[macaddr macaddr]
[MAC address] - Enter the MAC address.
[comment
comment]
[comment] - Enter a brief description for such profile.
<ProfileName>
<ProfileName> - Enter the name (e.g., Bind_carrie) of IP Bind
MAC profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#lan
Vigor2960@config-t-lan#
Vigor2960@config-t-lan#ipbindmac add ip 192.168.1.89 Bind_carrie
Vigor2960@config-t-lan-ipbindmac-Bind_carrie#
6
6
.
.
5
5
.
.
1
1
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
t
t
,
,
g
g
e
e
t
t
It is used for reviewing the detailed settings or modifying settings for the selected IP bind
MAC profile (e.g., bind_carrie).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-lan#ipbindmac get
Vigor2960@config-t-lan#ipbindmac set [ip ip] [macaddr macaddr] [comment
comment]
Command Description
get
Get the configuration of IP bind MAC.
set
Modify the settings of IP bind MAC.
[ip ip]
[IP] - Define an IPv4 address in this field.
[macaddr macaddr]
[MAC address] - Enter the MAC address.
[comment
comment]
[comment] - Enter a brief description for such profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#lan
Vigor2960@config-t-lan#
Vigor2960 Series User’s Guide
538
Vigor2960@config-t-lan#ipbindmac Bind_carrie
Vigor2960@config-t-lan-ipbindmac-Bind_carrie#
Vigor2960@config-t-lan-ipbindmac-bind_carrie# set ip 192.168.1.86
set done
Vigor2960@config-t-lan-ipbindmac-bind_carrie# get
ip : 192.168.1.86
macaddr :
comment :
6
6
.
.
5
5
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
i
i
p
p
r
r
o
o
u
u
t
t
i
i
n
n
g
g
Users could use [iprouting] command to configure IP Routing (LAN/WAN Proxy ARP) to
add or delete the profile or use “show” to get the profile list in the directory. Enter the profile
name to open it and modify the profile directly.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-lan#iprouting add <SectionName>
Vigor2960@config-t-lan#iprouting delete <SectionName>
Vigor2960@config-t-lan#iprouting show
Vigor2960@config-t-lan#iprouting show <SectionName>
Vigor2960@config-t-lan#iprouting <SectionName>
Command Description
iprouting add
<SectionName>
Add a new IP routing profile.
<SectionName> - Enter the name of IP routing profile.
iprouting delete
<SectionName>
Remove a selected IP routing profile.
<SectionName> - Enter the name (e.g., iprouting_carrie) of
routing profile to be deleted.
iprouting show
Display a summary for all IP routing profiles.
iprouting show
<SectionName>
Display a summary for the selected IP routing profile.
<SectionName> - Enter the name (e.g., iprouting_carrie) of IP
routing profile.
iprouting
<SectionName>
Modify detailed settings for the selected IP routing profile.
< SectionName > - Enter the name (e.g., iprouting_carrie) of
routing profile to be modified.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#lan
Vigor2960@config-t-lan#iprouting iprouting_carrie
Vigor2960@config-t-lan-iprouting-iprouting_carrie#
6
6
.
.
5
5
.
.
2
2
.
.
1
1
T
T
e
e
l
l
e
e
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
i
i
p
p
r
r
o
o
u
u
t
t
i
i
n
n
g
g
a
a
d
d
d
d
?
?
To configure detailed settings for a session limit profile, users could use [iprouting add] to
create a new profile with detailed settings.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960 Series User’s Guide
539
Vigor2960@config-t-lan# iprouting add [status status] [wan_pf
wan_profile] [lan_pf lan_profile] [ipaddr ipaddr] [mask mask]
<SectionName>
Command Description
add
Add a new IP routing profile.
[status status]
[status] - Enter Enable or Disable.
[wan_pf
wan_profile]
[wan_profile] - Enter the name (e.g., w_carrie) of WAN profile.
[lan_pf lan_profile]
[lan_profile] - Enter the name (e.g., lan_carrie) of LAN profile.
[ipaddr ipaddr]
[ipaddr] - Enter the IP address for such profile.
[mask mask]
Enter the network mask for such profile.
[mask] - Available options include:
255.255.255.252/30
255.255.255.248/29
255.255.255.240/28
255.255.255.224/27
255.255.255.192/26
255.255.255.128/25
255.255.255.0/24
<SectionName>
Enter the name (e.g., iprouting_carrie) of routing profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#lan
Vigor2960@config-t-lan#
Vigor2960@config-t-lan#iprouting add status enable wan_pf wan_carrie
lan_pf lan_david ipaddr 192.168.1.53 mask 255.255.255.252/30
iprouting_david
Vigor2960@config-t-lan-iprouting-iprouting_david#
6
6
.
.
5
5
.
.
2
2
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
t
t
,
,
g
g
e
e
t
t
It is used for reviewing the detailed settings or modifying settings for the selected IP routing
profile (e.g., iprouting_carrie).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-lan-iprouting-<SectionName>#get
Vigor2960@config-t-lan-iprouting-<SectionName>#set [status status]
[wan_pf wan_profile] [lan_pf lan_profile] [ipaddr ipaddr] [mask mask]
Command Description
get
Display current settings of the selected IP routing profile.
set
Change or modify the settings for a selected profile.
[status status]
[status] - Enter Enable or Disable.
[wan_pf
[wan_profile] - Enter the name (e.g., wan_carrie) of WAN profile.
Vigor2960 Series User’s Guide
540
wan_profile]
[lan_pf lan_profile]
[lan_profile] - Enter the name (e.g., lan_carrie) of LAN profile.
[ipaddr ipaddr]
[ipaddr] - Enter the IP address for such profile.
[mask mask]
Enter the network mask for such profile.
[mask] - Available options include:
255.255.255.252/30
255.255.255.248/29
255.255.255.240/28
255.255.255.224/27
255.255.255.192/26
255.255.255.128/25
255.255.255.0/24
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#lan
Vigor2960@config-t-lan#iprouting iprouting_carrie
Vigor2960@config-t-lan-iprouting-iprouting_carrie#
Vigor2960@config-t-lan-iprouting-iprouting_carrie# set wan_pf
wan_carrie
set done
Vigor2960@config-t-lan-iprouting-iprouting_carrie# set lan_pf
lan_carrie
set done
6
6
.
.
5
5
.
.
3
3
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
p
p
f
f
It is used to configure LAN Profile to add or delete the profile or use “show” to get the
profile list in the directory. Enter the profile name to open it and modify the profile directly.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-lan#pf add <SectionName>
Vigor2960@config-t-lan#pf delete <SectionName>
Vigor2960@config-t-lan#pf show
Vigor2960@config-t-lan#pf show <SectionName>
Vigor2960@config-t-lan#pf <SectionName>
Command Description
pf add
<SectionName>
Add a new LAN profile.
<SectionName> - Enter the name (e.g., lan_carrie) of new LAN
profile.
pf delete
<SectionName>
Remove a selected IP routing profile.
<SectionName> - Enter the name (e.g., lan_carrie) of routing
profile to be deleted.
Vigor2960 Series User’s Guide
541
pf show
Display a summary for all LAN profiles.
pf show
<SectionName>
Display detailed settings for the specified LAN profile.
pf <SectionName>
Modify detailed settings for the selected profile.
<SectionName> - Enter the name (e.g., lan_carrie) of LAN profile
to be modified.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#lan
Vigor2960@config-t-lan#
Vigor2960@config-t-lan#pf show
interface status desc vid proto
ipaddr mask dhcp_status proto6
lan1 enable 10 static
192.168.1.1 255.255.255.0 enable link-local
lan_carrie disable 1 static
0.0.0.0 255.255.255.0 enable link-local
Vigor2960@config-t-lan#pf show lan_carrie
status : Disable
desc :
vid : 1
pvid : 0
default_mac : Enable
mac : 00:50:7f:7b:83:00
proto : static
mode : NAT
ipaddr : 0.0.0.0
mask : 255.255.255.0
cdmode : None
gateway :
cdint : 5
cdretry : 3
dhcp_status : Enable
start :
end :
dns :
lease : 86400
…………………
6
6
.
.
5
5
.
.
3
3
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
p
p
f
f
a
a
d
d
d
d
?
?
To configure detailed settings for a LAN profile, users could use [pf add] to create a new
LAN profile with detailed settings.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-lan# pf add [status status] [desc description] [vid
vid] [pvid pvid] [default_mac default_mac] [mac macaddr] [mode mode]
[ipaddr ipaddress] [mask mask] [cdmode static_cd_mode] [gateway
static_gateway] [cdint static_cd_interval] [cdretry static_cd_retry]
[dhcp_status dhcp_status] [start dhcp_start] [end dhcp_end] [dns
dhcp_dns] [lease lease] [router router] [dhcp_next_server
dhcp_next_server] [dhcp_options dhcp_options] [rdi_pool rdi_pool]
[rdi_start rdi_start] [rdi_end rdi_end] [2nd_subnet 2nd_subnet]
Vigor2960 Series User’s Guide
542
[lan_dns_redirect lan_dns_redirect] [proto6 proto6] [ip6addr
static_ip6address] [ip6length static_ip6length] [sla_wan dhcp6_sla_wan]
[sla_id dhcp6_sla_id] <SectionName>
Command Description
[status status]
Enable or disable the specified LAN profile.
[status] - Enter Enable or Disable.
[desc description]
Make a brief explanation for the LAN profile.
[description] - Enter any words to describe such LAN profile.
[vid vid]
Specify the name of the VLAN ID.
[vid] - Set a number (1 ~ 4095) as VLAN ID.
[pvid pvid]
Specify the priority (0/1/2/3/4/5/6/7) for this LAN profile.
[pvid] - Set the priority by entering the number of
0/1/2/3/4/5/6/7.
[default_mac
default_mac]
Enable / disable the function of specifying the MAC address as
default setting.
[default_mac] - Enter Enable or Disable.
[mac macaddr]
Enter the MAC address if default MAC address is disabled.
[macaddr] - Enter the MAC address with the format of
“xx-xx-xx-xx-xx-xx”
[mode mode]
From this subnet to remote network, you have to do NAT or
ROUTING (NAT/ROUTING)
[mode] - Enter NAT or ROUTING.
[ipaddr ipaddress]
Set a private IP address of this router for LAN profile.
[ipaddress] - Enter a private IP address.
[mask mask]
Set a subnet mask for LAN profile.
[mask]- Enter the subnet mask with the format of
“xxx.xxx.xxx.xxx/0-32”.
[cdmode
static_cd_mode]
Select a detecting mode for this profile.
[static_cd_mode] - Enter None or ARP.
[gateway
static_gateway]
If ARP is selected as cdmode, set this IP address.
[static_gateway] - Enter a public IP address as gateway.
[cdint
static_cd_interval]
If ARP is selected as cdmode, set connection detection interval.
[static_cd_interval] - Enter an interval period of time for each
detecting.
[cdretry
static_cd_retry]
If ARP is selected as cdmode, set connection detection retry.
[static_cd_retry] - Enter detecting times to ensure the connection
of the LAN interface
[dhcp_status
dhcp_status]
Enable or disable the function of the DHCP server.
[dhcp_status] - Enter Enable or Disable.
[start dhcp_start]
Set an IP address as the starting point for DHCP server.
[dhcp_start] - Enter an IP address.
[end dhcp_end]
Set an IP address as the ending point for DHCP server.
[dhcp_end] - Enter an IP address.
[dns dhcp_dns]
Set an IP address for the DHCP DNS server.
Vigor2960 Series User’s Guide
543
[dhcp_dns] - Enter an IP address.
[lease lease]
Set a lease time for the DHCP server. The time unit is minute.
[lease] - Enter any number.
[router router]
Vigor router will be treated as gateway in default. If you want to
assign other device as gateway, please enter the IP address in
this field.
[router] - Enter the IP address of the other gateway.
[dhcp_next_server
dhcp_next_server]
Set next server for DHCP server.
[dhcp_next_server] - Enter the IP address of the secondary
DHCP server.
[dhcp_options
dhcp_options]
Set DHCP option number for DHCP sever.
[dhcp_options] - Set the option number.
[rdi_pool rdi_pool]
Enable or disable the function of remote dial-in IP.
[rdi_pool]- Enter Enable / Disable.
[rdi_start rdi_start]
Set the starting IP address for remote dial-in IP range.
[rdi_start] - Enter an IP address.
[rdi_end rdi_end]
Set the ending IP address for remote dial-in IP range.
[rdi_end] - Enter an IP address.
[2nd_subnet
2nd_subnet]
Specify the second subnet.
<2nd_subnet> - Enter the IP address.
[lan_dns_redirect
lan_dns_redirect]
Enable or disable the function of redirecting DNS queries from
such LAN profile to router's DNS Server.
[lan_dns_redirect]- Enter Enable or Disable.
[proto6 proto6]
Defines the IPv6 connection types for LAN interface.
[proto6]- Available IPv6 protocols contain:
Link_Local
Static
DHCP_SLA
[ip6addr
static_ip6address]
If Static is set as IPv6 Protocol, please enter the IPv6 address in
this field.
[static_ip6address] - Enter the IPv6 address for LAN profile.
[ip6length
static_ip6length]
Set prefix length for Static IPv6.
[static_ip6length] - Enter the value.
[sla_wan
dhcp6_sla_wan]
If DHCP-SLA is chosen as IPv6 Protocol, set one of the WAN
profiles in this field.
[dhcp6_sla_wan] - Enter the name of WAN profile.
[sla_id dhcp6_sla_id]
Set SLA_ID number for DHCPv6 server.
[dhcp6_sla_id] - Enter number as SLA ID number.
<SectionName>
[SectionName]- Enter the name of LAN profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a LAN profile named with “lan_test”.
Vigor2960>enable
Vigor2960 Series User’s Guide
544
Vigor2960# configure terminal
Vigor2960@config-t# lan
Vigor2960@config-t-lan # pf add status enable lan_test vid 6 pvid 2
proto none
Vigor2960@config-t-lan-pf-lan_test#
Vigor2960@config-t-lan-pf-lan_test#exit
Vigor2960@config-t-lan#
6
6
.
.
5
5
.
.
3
3
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
2
2
n
n
d
d
_
_
s
s
u
u
b
b
n
n
e
e
t
t
Users could use [2nd_subnet] command to modify second subnet of a specified LAN profile
(e.g., lan_carrie).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-LAN-pf-<SectionName>#2nd_subnet add <ipaddr> <netmsk>
<mode>
Vigor2960@config-t-LAN-pf-<SectionName>#2nd_subnet remove <ipaddr>
<netmsk> <mode>
Command Description
2nd_subnet add
<ipaddr>
<netmask>
<mode>
Specify settings as second subnet.
<ipaddr> - Enter an IP address.
<netmask> - Enter subnet mask.
<mode> - Enter NAT or ROUTING.
2nd_subnet
remove
Delete settings for the second subnet.
<ipaddr> - Enter the IP address of the second subnet.
<netmask> - Enter subnet mask of the second subnet.
<mode> - Enter NAT or ROUTING of the second subnet.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a LAN profile named with “lan_carrie”.
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#lan
Vigor2960@config-t-lan# pf add lan_carrie
Vigor2960@config-t-lan-pf-lan_carrie# 2nd_subnet add 192.168.1.201
255.255.255.255/24 NAT
6
6
.
.
5
5
.
.
3
3
.
.
3
3
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
d
d
h
h
c
c
p
p
Users could use [dhcp/dhcp6] command to modify DHCP server settings (such as DNS
server, DHCP server) for an existing LAN profile. Use the [get] or [set] command to
configure the information.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-lan-pf-<SectionName># dhcp
Vigor2960@config-t-lan-pf-<SectionName>_dhcp# dns add <dns>
Vigor2960@config-t-lan-pf-<SectionName>_dhcp# dns remove <dns>
Vigor2960@config-t-lan-pf-<SectionName>_dhcp# get
Vigor2960 Series User’s Guide
545
Vigor2960@config-t-lan-pf-<SectionName>_dhcp# set [status status]
[start start] [end end] [dns dns] [router router] [lease lease] [rdi_pool
status] [rdi_start rdi_start] [rdi_end rdi_end]
Command Description
dns add <dns>
Add an IP address as DNS server.
<dns> - Enter IP address for DNS server.
dns remove <dns>
Remove the IP address of the DNS server.
<dns> - Enter IP address for DNS server to be removed.
get
Display current DHCP status of the selected LAN profile.
set
Modify settings for the selected profile.
[status status]
Enable or Disable the profile.
[status] - Enter Enable or Disable.
[start start]
Enter an IP address as starting point.
[start] – Enter an IP address.
[end end]
Enter an IP address as ending point.
[end] – Enter an IP address.
[dns dns]
Enter an IP address as DNS server.
[dns] – Enter the IP address.
[router router]
Enter the IP address of the other gateway.
[router] – Enter an IP address.
[lease lease]
Enter any number as lease time for DHCP server.
[lease] – Enter a number.
[rdi_pool status]
Enable / Disable to the function of remote dial-in IP.
[status] – Enter Enable or Disable.
[rdi_start
rdi_start]
Enter an IP address as the starting IP address for remote dial-in IP
range.
[rdi_start] – Enter the IP address.
[rdi_end rdi_end]
Enter an IP address as the ending IP address for remote dial-in IP
range.
[rdi_end]- Enter the IP address.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a LAN profile named with “lan_carrie”.
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#lan
Vigor2960@config-t-lan# pf add lan_carrie
Vigor2960@config-t-lan-pf-lan_carrie#dhcp
Vigor2960@config-t-lan-pf-lan_carrie_dhcp#
6
6
.
.
5
5
.
.
3
3
.
.
4
4
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
d
d
h
h
c
c
p
p
6
6
Vigor2960 Series User’s Guide
546
Users could use [dhcp6] command to modify DHCPv6 server settings (such as DHCPv6
server) for an existing LAN profile. Use the [get] or [set] command to configure the
information.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-lan-pf-<SectionName># dhcp6
Vigor2960@config-t-lan-pf-<SectionName>-dhcp6# get
Vigor2960@config-t-lan-pf-<SectionName>-dhcp6# set [status status]
[mode mode] [dns_auto dns_auto] [start start] [end end] [dns dns]
Command Description
get
Display current DHCPv6 status of the selected LAN profile.
set
Modify settings for the selected profile.
[status status]
Enable or Disable the profile.
[status] - Enter Enable or Disable.
[mode mode]
Obtain IP address automatically or define the IPv6 address(es)
manually.
[mode] - Enter Automatic_Setting or Manual_Setting.
[dns_auto
dns_auto]
If Manual_Setting is specified as mode, enter Enable to make
Vigor2960 as DNS server automatically.
[dns_auto] – Enter Enable or Disable.
[start start]
If Manual_Setting is specified as mode, enter an IPv6 address as the
starting IP.
[start] – Enter an IPv6 address.
[end end]
If Manual_Setting is specified as mode, enter an IPv6 address as the
ending IP.
[end] – Enter an IPv6 address.
[dns dns]
If Manual_Setting is specified as mode, enter the IPv6 address of
DNS server.
[dns] – Enter an IPv6 address.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a LAN profile named with “lan_carrie”.
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#lan
Vigor2960@config-t-lan# pf add lan_carrie
Vigor2960@config-t-lan-pf-lan_carrie#dhcp6
Vigor2960@config-t-lan-pf-lan_carrie-dhcp6#get
status : Disable
mode : Automatic_Setting
start_auto :
end_auto :
dns_auto :
start :
end :
Vigor2960 Series User’s Guide
547
dns :
6
6
.
.
5
5
.
.
3
3
.
.
5
5
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
d
d
h
h
c
c
p
p
r
r
e
e
l
l
a
a
y
y
Users use [dhcprelay] command to modify / configure DHCP Relay agent, then type the [get]
or [set] command to configure the details information.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-lan-pf-<SectionName># dhcprelay
Vigor2960@config-t-lan-pf-<SectionName>-dhcprelay>#get
Vigor2960@config-t-lan-pf-<SectionName>-dhcprelay>#set [status status]
[wan wan_profile] [server server_ip] [agent_ip agent_ip]
Command Description
get
Get the configuration of DHCP relay profile.
set
Modify settings for the selected profile.
[status status]
Enable or Disable the profile.
[status] – Enter Enable or Disable.
[wan wan_profile]
Specify the interface (WAN profile name) for the DHCP server.
[wan_profile] – Enter the name of WAN profile.
[server server_ip]
Specify the IP address of DHCP Server.
[server_ip] – Enter an IP address.
[agent_ip agent_ip]
Enter the IP address of DHCP Relay Agent.
[agent_ip]- Enter the IP address.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a LAN profile named with “lan_carrie”.
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#lan
Vigor2960@config-t-lan# pf add lan_carrie
Vigor2960@config-t-lan-pf-lan_carrie#
Vigor2960@config-t-lan-pf-lan_carrie#dhcprelay
Vigor2960@config-t-lan-pf-lan_carrie-dhcprelay#get
status : Disable
wan :
server :
agent_ip :
6
6
.
.
5
5
.
.
3
3
.
.
6
6
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
e
e
x
x
i
i
t
t
Users could use this command to go back to upper level.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-LAN-pf-<SectionName># exit
Command Description
exit
Go back to upper level (e.g., config-t-LAN menu).
Vigor2960 Series User’s Guide
548
6
6
.
.
5
5
.
.
3
3
.
.
7
7
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
g
g
e
e
t
t
Users could use this command to display the detailed configuration information of the
selected LAN profile
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-LAN-pf-<SectionName># get
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a LAN profile named with “lan_carrie”.
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#lan
Vigor2960@config-t-lan# pf add lan_carrie
Vigor2960@config-t-lan-pf-lan_carrie#
Vigor2960@config-t-lan-pf-lan_carrie# get
status : Disable
desc :
vid : 1
pvid : 0
default_mac : Enable
mac : 00:50:7f:7b:83:00
proto : static
mode : NAT
ipaddr : 0.0.0.0
mask : 255.255.255.0
cdmode : None
gateway :
cdint : 5
cdretry : 3
dhcp_status : Enable
start :
end :
dns :
lease : 86400
router :
dhcp_next_server :
…………
……………
6
6
.
.
5
5
.
.
3
3
.
.
8
8
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
r
r
a
a
d
d
v
v
d
d
Uses can use [radvd] command to configure / modify RADVD settings for an existing LAN
profile.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-lan-pf-<SectionName>#
Vigor2960@config-t-lan-pf-<SectionName># radvd
Vigor2960@config-t-lan-pf-<SectionName>-radvd# get
Vigor2960@config-t-lan-pf-<SectionName>-radvd# set status [status
status] [lifetime lifetime]
Command Description
get
Display current RADVD of the selected LAN profile.
Vigor2960 Series User’s Guide
549
set
Modify settings for the selected profile.
[status status]
Enable or Disable the RADVD function.
[status] – Enter Enable or Disable.
[lifetime lifetime]
Enter a value (ranging from 10 ~ 150 minutes) for advertisement
lifetime.
[lifetime] – Enter a value.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a LAN profile named with “lan_carrie”.
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#lan
Vigor2960@config-t-lan# pf add lan_carrie
Vigor2960@config-t-lan-pf-lan_carrie#radvd
Vigor2960@config-t-lan-pf-lan_carrie_radvd#
Vigor2960@config-t-lan-pf-lan_carrie-radvd#get
status : Enable
lifetime : 30
6
6
.
.
5
5
.
.
3
3
.
.
9
9
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
t
t
It is used for reviewing the detailed settings or modifying settings for the selected profile
(e.g., lan_carrie).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-lan-pf-<SectionName># set [status status] [desc
description] [vid vid] [pvid pvid] [default_mac default_mac] [mac macaddr]
[mode mode] [ipaddr ipaddress] [mask mask] [cdmode static_cd_mode]
[gateway static_gateway] [cdint static_cd_interval] [cdretry
static_cd_retry] [dhcp_status dhcp_status] [start dhcp_start] [end
dhcp_end] [dns dhcp_dns] [lease lease] [router router] [dhcp_next_server
dhcp_next_server] [dhcp_options dhcp_options] [rdi_pool rdi_pool]
[rdi_start rdi_start] [rdi_end rdi_end] [2nd_subnet 2nd_subnet]
[lan_dns_redirect lan_dns_redirect] [proto6 proto6]
[ip6addrstatic_ip6address] [ip6length static_ip6length] [sla_wan
dhcp6_sla_wan] [sla_iddhcp6_sla_id]
Command Description
<SectionName>
Display the name of the profile.
[status status]
Enable or disable the specified LAN profile.
[status] - Enter Enable or Disable.
[desc description]
Make a brief explanation for the LAN profile.
[description] - Enter any words to describe such LAN profile.
[vid vid]
Specify the name of the VLAN ID.
[vid] - Set a number (1 ~ 4095) as VLAN ID.
[pvid pvid]
Specify the priority (0/1/2/3/4/5/6/7) for this LAN profile.
[pvid] - Set the priority by entering the number of 0/1/2/3/4/5/6/7.
[default_mac
default_mac]
Enable / disable the function of specifying the MAC address as
Vigor2960 Series User’s Guide
550
default setting.
[default_mac] - Enter Enable or Disable.
[mac macaddr]
Enter the MAC address if default MAC address is disabled.
[macaddr] - Enter the MAC address with the format of
“xx-xx-xx-xx-xx-xx”
[mode mode]
From this subnet to remote network, you have to do NAT or
ROUTING (NAT/ROUTING)
[mode] - Enter NAT or ROUTING.
[ipaddr ipaddress]
Set a private IP address of this router for LAN profile.
[ipaddress] - Enter a private IP address.
[mask mask]
Set a subnet mask for LAN profile.
[mask]- Enter the subnet mask with the format of
“xxx.xxx.xxx.xxx/0-32”.
[cdmode
static_cd_mode]
Select a detecting mode for this profile.
[static_cd_mode] - Enter None or ARP.
[gateway
static_gateway]
If ARP is selected as cdmode, set this IP address.
[static_gateway] - Enter a public IP address as gateway.
[cdint
static_cd_interval]
If ARP is selected as cdmode, set connection detection interval.
[static_cd_interval] - Enter an interval period of time for each
detecting.
[cdretry
static_cd_retry]
If ARP is selected as cdmode, set connection detection retry.
[static_cd_retry] - Enter detecting times to ensure the connection
of the LAN interface
[dhcp_status
dhcp_status]
Enable or disable the function of the DHCP server.
[dhcp_status] - Enter Enable or Disable.
[start dhcp_start]
Set an IP address as the starting point for DHCP server.
[dhcp_start] - Enter an IP address.
[end dhcp_end]
Set an IP address as the ending point for DHCP server.
[dhcp_end] - Enter an IP address.
[dns dhcp_dns]
Set an IP address for the DHCP DNS server.
[dhcp_dns] - Enter an IP address.
[lease lease]
Set a lease time for the DHCP server. The time unit is minute.
[lease] - Enter any number (between 300 and 604800).
[router router]
Vigor router will be treated as gateway in default. If you want to
assign other device as gateway, please enter the IP address in this
field.
[router] - Enter the IP address of the other gateway.
[dhcp_next_server
dhcp_next_server]
Set next server for DHCP server.
[dhcp_next_server] - Enter the IP address of the secondary DHCP
server.
[dhcp_options
dhcp_options]
Set DHCP option number for DHCP sever.
[dhcp_options] - Set the option number.
[rdi_pool rdi_pool]
Enable or disable the function of remote dial-in IP.
[rdi_pool]- Enter Enable / Disable.
Vigor2960 Series User’s Guide
551
[rdi_start rdi_start]
Set the starting IP address for remote dial-in IP range.
[rdi_start] - Enter an IP address.
[rdi_end rdi_end]
Set the ending IP address for remote dial-in IP range.
[rdi_end] - Enter an IP address.
[2nd_subnet
2nd_subnet]
Specify the second subnet.
<2nd_subnet> - Enter the IP address.
[lan_dns_redirect
lan_dns_redirect]
Enable or disable the function of redirecting DNS queries from
such LAN profile to router's DNS Server.
[lan_dns_redirect]- Enter Enable or Disable.
[proto6 proto6]
Defines the IPv6 connection types for LAN interface.
[proto6]- Available IPv6 protocols contain:
Link_Local
Static
DHCP_SLA
[ip6addr
static_ip6address]
If Static is set as IPv6 Protocol, please enter the IPv6 address in
this field.
[static_ip6address] - Enter the IPv6 address for LAN profile.
[ip6length
static_ip6length]
Set prefix length for Static IPv6.
[static_ip6length] - Enter the value.
[sla_wan
dhcp6_sla_wan]
If DHCP-SLA is chosen as IPv6 Protocol, set one of the WAN
profiles in this field.
[dhcp6_sla_wan] - Enter the name of WAN profile.
[sla_id
dhcp6_sla_id]
Set SLA_ID number for DHCPv6 server.
[dhcp6_sla_id] - Enter number as SLA ID number.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a LAN profile named with “lan_carrie”.
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#lan
Vigor2960@config-t-lan# pf add lan_carrie
Vigor2960@config-t-lan-pf-lan_carrie#set status enable desc
for_study default_mac enable mode NAT ipaddr 192.168.1.78 mask
255.255.255.0/24 cdmode none dhcp_status disable dns 192.168.1.100
lease 350 rdi_pool disable
set done
Vigor2960@config-t-lan-pf-lan_carrie#
6
6
.
.
5
5
.
.
4
4
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
r
r
o
o
u
u
t
t
e
e
Users could use [route] command to add or delete the static route profile or use “show” to
get the profile list in the directory. Enter the profile name to open it and modify the profile
directly.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-lan#route add <SecitonName>
Vigor2960@config-t-lan#route delete <SectionName>
Vigor2960 Series User’s Guide
552
Vigor2960@config-t-lan#route show
Vigor2960@config-t-lan#route show <SecitonName>
Vigor2960@config-t-lan#route <SecitonName>
Command Description
route add
<SectionName>
Add a new route profile.
<SectionName> - Enter the name of route profile.
route delete
<SectionName>
Remove a selected route profile.
<SectionName> - Enter the name (e.g., route_carrie) of route
profile to be deleted.
route show
Display the status for all route profiles.
route show
<SectionName>
Display the status of selected route profile.
<SectionName> - Enter the name (e.g., route_carrie) of route
profile.
route
<SectionName>
Modify detailed settings for the selected profile.
<SectionName> - Enter the name (e.g., route_carrie) of route
profile to be modified.
6
6
.
.
5
5
.
.
4
4
.
.
1
1
T
T
e
e
l
l
e
e
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
r
r
o
o
u
u
t
t
e
e
a
a
d
d
d
d
?
?
To configure detailed settings for a routing profile, users could use [route add] to create a
new profile with detailed settings.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-lan#route add [status status] [dest dest] [mask mask]
[gateway gateway] [pf profile] [metric metric] <SectionName>
Command Description
add
Add a new route profile based on IPv4.
[status status]
Enable or disable the route profile.
[status] – Enter Enable or Disable.
[dest dest]
Specify an IP address as the destination.
[dest] – Enter an IP address.
[mask mask]
Enter the network mask for the destination.
[mask] - Available options include:
255.255.255.252/30
255.255.255.248/29
255.255.255.240/28
255.255.255.224/27
255.255.255.192/26
255.255.255.128/25
255.255.255.0/24
[gateway gateway]
Enter an IP address as the gateway for the route profile.
[gateway] – Enter the IP address.
[pf profile]
Specify the interface (LAN or WAN profile) for this static route.
Vigor2960 Series User’s Guide
553
[profile] – Enter the name of the profile.
[metric metric]
Enter the distance to the target (usually counted in hops).
[metric] – Enter the value.
<SectionName>
Enter the name (e.g., rout_marketing) of static route profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#lan
Vigor2960@config-t-lan#route add status enable dest 192.168.1.100
route_david
Vigor2960@config-t-lan-route-route_david#
6
6
.
.
5
5
.
.
4
4
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
t
t
,
,
g
g
e
e
t
t
It is used for reviewing the detailed settings or modifying settings for the selected routing
profile (e.g., route_david).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-lan-route-<SectionName># get
Vigor2960@config-t-lan-route-<SectionName># set [status status] [dest
dest] [mask mask] [gateway gateway] [pf profile] [metric metric]
Command Description
<SectionName>
Display the name of the profile.
get
Get the configuration of route profile.
set
Modify settings for the selected profile.
[status status]
Enable or disable the route profile.
[status] – Enter Enable or Disable.
[dest dest]
Specify an IP address as the destination.
[dest] – Enter an IP address.
[mask mask]
Enter the network mask for the destination.
[mask] - Available options include:
255.255.255.252/30
255.255.255.248/29
255.255.255.240/28
255.255.255.224/27
255.255.255.192/26
255.255.255.128/25
255.255.255.0/24
[gateway gateway]
Enter an IP address as the gateway for the route profile.
[gateway] – Enter the IP address.
[pf profile]
Specify the interface (LAN or WAN profile) for this static route.
[profile] – Enter the name of the profile.
[metric metric]
Enter the distance to the target (usually counted in hops).
Vigor2960 Series User’s Guide
554
[metric] – Enter the value.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#lan
Vigor2960@config-t-lan#route add status enable dest 192.168.1.100
route_marketing
Vigor2960@config-t-lan-route-route_marketing#
Vigor2960@config-t-lan-route-route_marketing# get
status : Enable
dest : 192.168.1.100
mask :
gateway :
pf :
metric :
Vigor2960@config-t-lan-route-route_marketing#
Vigor2960@config-t-lan-route-route_marketing# set status enable dest
192.168.10
120 mask 255.255.252/30 gateway 192.168.10.210 pf lan_carrie metric
150
set done
Vigor2960@config-t-lan-route-route_marketing#
6
6
.
.
5
5
.
.
5
5
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
r
r
o
o
u
u
t
t
e
e
6
6
Users could use [route] command to add or delete the static profile based on IPv6 address or
use “show” to get the profile list in the directory. Enter the profile name to open it and
modify the profile directly.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-lan#route6 add <SecitonName>
Vigor2960@config-t-lan#route6 delete <SectionName>
Vigor2960@config-t-lan#route6 show
Vigor2960@config-t-lan#route6 show <SecitonName>
Vigor2960@config-t-lan#route6 <SecitonName>
Command Description
route6 add
<SectionName>
Add a new route profile.
<SectionName> - Enter the name of route profile.
route6 delete
<SectionName>
Remove a selected route profile.
<SectionName> - Enter the name (e.g., route6_production) of
route profile to be deleted.
route6 show
Display the status for all route profiles.
route6 show
<SectionName>
Display the status of selected route profile.
<SectionName> - Enter the name (e.g., route6_production) of
route profile.
route6
Modify detailed settings for the selected profile.
Vigor2960 Series User’s Guide
555
<SectionName>
<SectionName> - Enter the name (e.g., route6_production) of
route profile to be modified.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#lan
Vigor2960@config-t-lan#route6 add route6_production
Vigor2960@config-t-lan-route6-route6_production#
6
6
.
.
5
5
.
.
5
5
.
.
1
1
T
T
e
e
l
l
e
e
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
r
r
o
o
u
u
t
t
e
e
6
6
a
a
d
d
d
d
?
?
To configure detailed settings for a route profile (based on IPv6), users could use [route6 add]
to create a new profile with detailed settings.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-lan# route6 add [status status] [dest dest]
[prefix_len prefix_len] [nexthop nexthop] [pf profile] [metric metric]
<SectionName>
Command Description
add
Add a new route profile based on IPv6.
[status status]
Enable or Disable the route profile.
[status] – Enter Enable or Disable.
[dest dest]
Specify an IP address as the destination.
[dest] – Enter an IP address.
[prefix_len
prefix_len]
Specify the length of prefix.
[prefix_len] – Enter the length.
[nexthop nexthop]
Specify an IP address as the nexthop for the route profile.
[nexthop]- Enter the IP address.
[pf profile]
Specify the interface (LAN or WAN profile) for this static route.
[profile] – Enter the name of the profile.
[metric metric]
Specify the distance to the target (usually counted in hops).
[metric] – Enter the value.
<SectionName>
Enter the name (e.g., route6_production) of route profile to be
modified.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#lan
Vigor2960@config-t-lan#route6 add status enable route6_production
Vigor2960@config-t-lan-route6-route6_production#
6
6
.
.
5
5
.
.
5
5
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
t
t
,
,
g
g
e
e
t
t
Vigor2960 Series User’s Guide
556
It is used for reviewing the detailed settings or modifying settings for the selected profile
(e.g., route6_production).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-t-lan-route6-<SectionName># get
Vigor2960@config-t-lan-route6-<SectionName># set [status status] [dest
dest] [prefix_len prefix_len] [nexthop nexthop] [pf profile] [metric
metric]
Command Description
<SectionName>
Display the name of the profile.
get
Get the configuration of route6 profile.
set
Modify settings for the selected profile.
[status status]
Enable or Disable the route profile.
[status] – Enter Enable or Disable.
[dest dest]
Specify an IP address as the destination.
[dest] – Enter an IP address.
[prefix_len
prefix_len]
Specify the length of prefix.
[prefix_len] – Enter the length.
[nexthop nexthop]
Specify an IP address as the nexthop for the route profile.
[nexthop]- Enter the IP address.
[pf profile]
Specify the interface (LAN or WAN profile) for this static route.
[profile] – Enter the name of the profile.
[metric metric]
Specify the distance to the target (usually counted in hops).
[metric] – Enter the value.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#lan
Vigor2960@config-t-lan#route6 add status enable route6_production
Vigor2960@config-t-lan-route6-route6_production#
Vigor2960@config-t-lan-route6-route6_production# get
status : Enable
dest :
prefix_len :
nexthop :
pf :
metric :
6
6
.
.
5
5
.
.
6
6
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
w
w
i
i
t
t
c
c
h
h
Use [switch] command to configure Switch of the LAN profile; then type [vlan] command to
configure the details.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960 Series User’s Guide
557
Vigor2960@config-t-lan-switch# vlan add <vlan_id>
Vigor2960@config-t-lan-switch# vlan delete <vlan_id>
Vigor2960@config-t-lan-switch# vlan show
Vigor2960@config-t-lan-switch-vlan-<vlan_id># get
Vigor2960@config-t-lan-switch-vlan-<vlan_id># member add <member>
Vigor2960@config-t-lan-switch-vlan-<vlan_id># member remove <member>
Vigor2960@config-t-lan-switch-vlan-<vlan_id># untag add <untag>
Vigor2960@config-t-lan-switch-vlan-<vlan_id># untag remove <untag>
Command Description
vlan add <vlan_id>
Add a new switch VLAN profile.
<vlan_id> - Available number is from 1 to 4095.
vlan delete
<vlan_id>
Specify an interface for switch profile.
<vlan_id> - Available number is from 1 to 4095.
vlan show
Display current settings status.
get
Display configuration information for the selected switch VLAN
profile.
member add
<member>
Specify the interface for switch VLAN profile.
<member> - Enter LAN_Port_1, LAN_Port_2, LAN_ Port_3,
LAN_Port_4.
member remove
<member>
Delete the interface from such switch VLAN profile.
<member> - Enter LAN_Port_1, LAN_Port_2, LAN_ Port_3,
LAN_Port_4.
untag add
<member>
Select the interface to be untagged for switch VLAN profile.
<member> - Enter LAN_Port_1, LAN_Port_2, LAN_ Port_3,
LAN_Port_4.
untag remove
<member>
Delete the untagged interface from such switch VLAN profile.
<member> - Enter LAN_Port_1, LAN_Port_2, LAN_ Port_3,
LAN_Port_4.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure terminal
Vigor2960@config-t#lan
Vigor2960@config-t-lan# switch
Vigor2960@config-t-lan-switch#
Vigor2960@config-t-lan-switch# vlan show
vlanid member untag
10 1 1
11 2 2
1 1 1
Vigor2960@config-t-lan-switch#
6
6
.
.
6
6
N
N
A
A
T
T
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
NAT (Network Address Translation) is a method of mapping one or more IP addresses
and/or service ports into different specified services.Vigor2960 provides three functions in
NAT – Port Redirection and DMZ Host. Users could use the commands below to set up the
details.
Vigor2960 Series User’s Guide
558
To make NAT configuration, you have to type “configure nat” to access into next phase.
Vigor2960>enable
Vigor2960# configure nat
Vigor2960@config-nat# ?
.
There are three functions for NAT – Port Redirection, DMZ.
Available sub-commands under NAT include:
- port_redirect (refer to 6.6.1)
- dmz (refer to 6.6.2)
Note:
[XXX XXX] - [ ] means such command is optional. The former is command itself; the
latter is value/selection for such command.
<XXX XXX> - < > means such command is required. The former is command itself;
the latter is value/selection for such command.
6
6
.
.
6
6
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
p
p
o
o
r
r
t
t
_
_
r
r
e
e
d
d
i
i
r
r
e
e
c
c
t
t
Users could use [port_redirect] command to add or delete the Port Redirection profile or use
“show” to get the profile list in the directory. Enter the profile name to open it and modify
the profile detail configuration directly.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-nat#port_redirect add <ProfileName>
Vigor2960@config-nat#port_redirect delete <ProfileName>
Vigor2960@config-nat#port_redirect show
Vigor2960@config-nat#port_redirect show <ProfileName>
Vigor2960@config-nat#port_redirect <ProfileName>
Command Description
port_redirect add
<ProfileName>
Add a new port redirection profile.
<ProfileName> - Enter the name of port redirection profile.
port_redirect delete
<ProfileName>
Remove a selected port redirection profile.
<ProfileName> - Enter the name (e.g., port_r_carrie) of port
redirection profile to be deleted.
port_redirect show
Display the status for all Port Redirection profiles.
port_redirect show
<ProfileName>
Display the status of selected port redirection profile.
<ProfileName> - Enter the name (e.g., port_r_carrie) of port
redirection profile
port_redirect
<ProfilenName>
Modify detailed settings for the selected profile.
< ProfileName > - Enter the name (e.g., port_r_carrie) of profile
to be modified.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a port redirection profile named with “port_r_carrie”.
Vigor2960>enable
Vigor2960 Series User’s Guide
559
Vigor2960# configure nat
Vigor2960@config-nat# ?
Vigor2960@config-nat# port_redirect add status enable port_r_carrie
Vigor2960@config-nat-pr-port_r_carrie#
6
6
.
.
6
6
.
.
1
1
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
p
p
o
o
r
r
t
t
_
_
r
r
e
e
d
d
i
i
r
r
c
c
t
t
a
a
d
d
d
d
?
?
To configure detailed settings for a port redirect profile, users could use [port redirect add] to
create a new port redirect profile with detailed settings.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-nat# port_redirect add [status status] [redirect_mode
redirect_mode] [public_prof public_prof] [useipalias useipalias]
[ipalias ipalias] [proto proto] [snat_ip snat_ip] [public_port_start
public_port_start] [public_port_end public_port_end] [private_ip
private_ip] [private_ip_end private_ip_end] [private_port_start
private_port_start] [private_port_end private_port_end]
[more_1to1_port more_1to1_port]<ProfileName>
Command Description
[status status]
Enable or Disable the port redirection profile.
[status] – Enter Enable or Disable.
[redirect_mode
redirect_mode]
Specify the direction for the port to be redirected.
Available options include:
One_to_One
Range_to_One
Range_to_Range_port
Range_to_Range_IP
[public_prof
public_prof]
Specify the WAN profile for such profile.
[public_prof] - Enter the name of the WAN profile (e.g.,
wan_carrie)
[useipalias
useipalias]
Determine to use IP alias or not.
[useipalias] - Available options include
No – No IP alias will be used.
Single_Alias – Only one IP Alias will be used.
All – All of the IP address(es) will be used as IP Alias.
[ipalias ipalias]
Enter the IP alias address if Single Alias is selected.
[ipalias] - Enter the IP address.
[proto proto]
Specify one protocol for such profile.
[proto] - Enter TCP, UDP, or TCP/UDP.
[snat_ip snat_ip]
Change the source IP as the new IP address specified here.
[snat_ip] – Enter an IP address.
[public_port_start
public_port_start]
It is available when Range to One or Range to Range (port) or
Range to Range (IP) is selected as Port Redirection Mode.
[public_port_start] - Enter starting number of the public port.
Vigor2960 Series User’s Guide
560
[public_port_end
public_port_end]
It is available when Range to One or Range to Range (port) or
Range to Range (IP) is selected as Port Redirection Mode.
<public_port_end> - Enter ending number of the public port.
[private_ip
private_ip]
Specify the private IP address of the internal host providing the
service.
[private_ip]- Enter a private IP address.
[private_ip_end
private_ip_end]
It is available when Range to Range (IP) is selected as Port
Redirection Mode.
[private_ip_end]- Enter a private IP address.
[private_port_start
private_port_start]
It is available when Range to Range (IP) is selected as Port
Redirection Mode.
[private_port_start] - Enter a starting number of the private port.
[private_port_end
private_port_end]
It is available when Range to Range (IP) is selected as Port
Redirection Mode.
[private_port_end]- Enter the number of the private port.
[more_1to1_port
more_1to1_port]
It is available when One to One is selected as Port Redirection
Mode. It allows you configuring more port numbers.
[more_ltol_port]- Enter a number.
<ProfileName>
[ProfileName] - Enter the name of the profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a port redirection profile named with “port_r_david”.
Vigor2960>enable
Vigor2960# configure nat
Vigor2960@config-nat# ?
Vigor2960@config-nat# port_redirect add status enable redirect_mode
One_to_One public_prof w_carrie proto TCP port_r_david
Vigor2960@config-nat-pr-port_r_david#
6
6
.
.
6
6
.
.
1
1
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
t
t
,
,
g
g
e
e
t
t
It is used for reviewing the detailed settings or modifying settings for the selected profile
(e.g., port_r_david).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-nat-pr-<ProfileName>#set [status status]
[redirect_mode redirect_mode] [public_prof public_prof] [useipalias
useipalias] [ipalias ipalias] [proto proto]
[snat_ip snat_ip]
[public_port_start public_port_start] [public_port_end public_port_end]
[private_ip private_ip] [private_ip_end private_ip_end]
[private_port_start private_port_start] [private_port_end
private_port_end] [more_1to1_port more_1to1_port]
Vigor2960@config-nat-pr-<ProfileName># get
Command Description
<ProfileName>
Display the name of the profile.
get
Get the configuration of port redirection profile.
Vigor2960 Series User’s Guide
561
set
Modify settings for the selected profile.
[status status]
Enable or Disable the port redirection profile.
[status] – Enter Enable or Disable.
[redirect_mode
redirect_mode]
Specify the direction for the port to be redirected.
Available options include:
One_to_One
Range_to_One
Range_to_Range_port
Range_to_Range_IP
[public_prof
public_prof]
Specify the WAN profile for such profile.
[public_prof] - Enter the name of the WAN profile (e.g.,
wan_carrie)
[useipalias
useipalias]
Determine to use IP alias or not.
[useipalias] - Available options include
No – No IP alias will be used.
Single_Alias – Only one IP Alias will be used.
All – All of the IP address(es) will be used as IP Alias.
[ipalias ipalias]
Enter the IP alias address if Single Alias is selected.
[ipalias] - Enter the IP address.
[proto proto]
Specify one protocol for such profile.
[proto] - Enter TCP, UDP, or TCP/UDP.
[snat_ip snat_ip]
Change the source IP as the new IP address specified here.
[snat_ip] – Enter an IP address.
[public_port_start
public_port_start]
It is available when Range to One or Range to Range (port) or
Range to Range (IP) is selected as Port Redirection Mode.
[public_port_start] - Enter starting number of the public port.
[public_port_end
public_port_end]
It is available when Range to One or Range to Range (port) or
Range to Range (IP) is selected as Port Redirection Mode.
<public_port_end> - Enter ending number of the public port.
[private_ip
private_ip]
Specify the private IP address of the internal host providing the
service.
[private_ip]- Enter a private IP address.
[private_ip_end
private_ip_end]
It is available when Range to Range (IP) is selected as Port
Redirection Mode.
[private_ip_end]- Enter a private IP address.
[private_port_start
private_port_start]
It is available when Range to Range (IP) is selected as Port
Redirection Mode.
[private_port_start] - Enter a starting number of the private port.
[private_port_end
private_port_end]
It is available when Range to Range (IP) is selected as Port
Redirection Mode.
[private_port_end]- Enter the number of the private port.
[more_1to1_port
It is available when One to One is selected as Port Redirection
Vigor2960 Series User’s Guide
562
more_1to1_port]
Mode. It allows to configure more port numbers.
[more_ltol_port]- Enter a number.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure nat
Vigor2960@config-nat# ?
Vigor2960@config-nat# port_redirect add status enable port_r_david
Vigor2960@config-nat-pr-port_r_david# set status enable
more_1to1_port 10
set done
Vigor2960@config-nat-pr-port_r_david#
6
6
.
.
6
6
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
d
d
m
m
z
z
Users could use [dmz] command to configure DMZ Host to add or delete the profile or use
“show” to get the profile list in the directory. Enter the profile name to open it and modify
the profile directly.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-nat#dmz add <ProfileName>
Vigor2960@config-nat#dmz delete <ProfileName>
Vigor2960@config-nat#dmz show
Vigor2960@config-nat#dmz show <ProfileName>
Vigor2960@config-nat#dmz <ProfileName>
Command Description
dmz add
<ProfileName>
Add a new DMZ profile.
<ProfileName> - Enter the name of DMZ profile.
dmz delete
<ProfileName>
Remove a selected DMZ profile.
<ProfileName> - Enter the name (e.g., dmz_carrie) of DMZ
profile to be deleted.
dmz show
Display the status for all DMZ profiles.
dmz show
<ProfileName>
Display the status of selected DMZ profile.
<ProfileName> - Enter the name (e.g., dmz_carrie) of DMZ
profile.
dmz
<ProfilenName>
Modify detailed settings for the selected profile.
<ProfileName> - Enter the name (e.g., dmz_carrie) of DMZ
profile to be modified.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a DMZ profile named with “dmz_carrie”.
Vigor2960>enable
Vigor2960# configure nat
Vigor2960@config-nat# dmz add dmz_carrie
Vigor2960@config-nat-dmz-dmz_carrie#
Vigor2960 Series User’s Guide
563
6
6
.
.
6
6
.
.
2
2
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
d
d
m
m
z
z
a
a
d
d
d
d
?
?
To configure detailed settings for a DMZ host profile, users could use [dmz add] to create a
new DMZ host profile with detailed settings.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-nat#dmz add [status status] [prof prof] [useipalias
useipalias] [ipalias ipalias] [ip private_ip] [allow_access
allow_access] [dst_ip_obj dst_ip_obj] [dst_ip_grp dst_ip_grp]
[servicetype servicetype] <ProfileName>
Command Description
[status status]
Enable or Disable the DMZ profile.
[status] – Enter Enable or Disable.
[prof prof]
Specify a WAN profile for data outgoing.
[prof] - Enter the name of WAN profile (e.g., wan_carrie).
[useipalias
useipalias]
Enable or disable the IP Alias function.
[useipalias] - Enter Enable or Disable.
[ipalias ipalias]
If IP Alias is enabled, specify an IP alias for such profile.
[ipalias] - Enter the IP address you want.
[ip private_ip]
Set the IP address of the DMZ host.
[private_ip] - Enter the IP address.
[allow_access
allow_access]
Make DMZ host access into the network.
[allow_access] - Enter Enable or disable.
[dst_ip_obj
dst_ip_obj]
Specify an IP object to apply such profile.
[dst_ip_obj] - Enter the name of the object profile.
[dst_ip_grp
dst_ip_grp]
Specify an IP group to apply such profile.
[dst_ip_grp] - Enter the name of the object group profile.
[servicetype
servicetype]
Specify a user defined service type to apply such profile.
[servicetype] - Enter the name of the service type.
<ProfileName>
< ProfileName > - Enter the name (e.g., dmz_david) of DMZ
profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure nat
Vigor2960@config-nat# dmz add status enable prof w_carrie useipalias
disable ip 192.168.2.65 allow_access enable dmz_david
Vigor2960@config-nat-dmz-dmz_david#
Vigor2960@config-nat-dmz-dmz_david# get
status : Enable
prof : w_carrie
useipalias : Disable
Vigor2960 Series User’s Guide
564
ipalias : 0.0.0.0
ip : 192.168.2.65
allow_access : Enable
dst_ip_obj :
dst_ip_grp :
servicetype :
6
6
.
.
6
6
.
.
2
2
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
t
t
,
,
g
g
e
e
t
t
It is used for reviewing the detailed settings or modifying settings for the selected DMZ
profile (e.g., dmz_david).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-nat-dmz-<ProfileName>#set status <status> prof <prof>
useipalias <useipalias> ipalias <ipalias> ip <private_ip> allow_access
<allow_access> dst_ip_obj <dst_ip_obj> dst_ip_grp <dst_ip_grp>
servicetype <servicetype>
Vigor2960@config-nat-dmz-<ProfileName>#get
Command Description
<ProfileName>
Display the name of the profile.
get
Get the configuration of DMZ profile.
set
Modify settings for the selected profile.
[status status]
Enable or Disable the DMZ profile.
[status] – Enter Enableor Disable.
[prof prof]
Specify a WAN profile for data outgoing.
[prof] - Enter the name of WAN profile (e.g., w_carrie).
[useipalias
useipalias]
Enable or disable the IP Alias function.
[useipalias] - Enter Enable or Disable.
[ipalias ipalias]
If IP Alias is enabled, specify an IP alias for such profile.
[ipalias] - Enter the IP address you want.
[ip private_ip]
Set the IP address of the DMZ host.
[private_ip] - Enter the IP address.
[allow_access
allow_access]
Make DMZ host access into the network.
[allow_access] - Enter Enable or disable.
[dst_ip_obj
dst_ip_obj]
Specify an IP object to apply such profile.
[dst_ip_obj] - Enter the name of the object profile.
[dst_ip_grp
dst_ip_grp]
Specify an IP group to apply such profile.
[dst_ip_grp] - Enter the name of the object group profile.
[servicetype
servicetype]
Specify a user defined service type to apply such profile.
[servicetype] - Enter the name of the service type.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a DMZ profile named with “dmz_david”.
Vigor2960 Series User’s Guide
565
Vigor2960>enable
Vigor2960# configure nat
Vigor2960@config-nat# dmz dmz_david
Vigor2960@config-nat-dmz-dmz_david#set prof wan1
Set done
Vigor2960@config-nat-dmz-dmz_david# get
status : Enable
prof : wan1
useipalias : Disable
ipalias : 0.0.0.0
ip : 192.168.2.65
allow_access : Enable
dst_ip_obj :
dst_ip_grp :
servicetype :
Vigor2960 Series User’s Guide
566
6
6
.
.
7
7
O
O
b
b
j
j
e
e
c
c
t
t
s
s
S
S
e
e
t
t
t
t
i
i
n
n
g
g
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
Vigor2960 provides many functions in Objects Setting. Users could use the commands
below to set up the details.
To make object setting configuration, you have to type “
configure object_setting” to
access into next phase.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object#
.
There are several functions for object settings. Available sub-commands under Object
Setting include:
- fext_object (refer to 6.7.1)
- ip_group (refer to 6.7.2)
- ip_object (refer to 6.7.3)
- keyword_object (refer to 6.7.4)
- service_group (refer to 6.7.5)
- service_object (refer to 6.7.6)
- time_group (refer to 6.7.7)
- time_object (refer to 6.7.8)
- web_category (refer to 6.7.9)
Note:
[XXX XXX] - [ ] means such command is optional. The former is command itself; the
latter is value/selection for such command.
<XXX XXX> - < > means such command is required. The former is command itself;
the latter is value/selection for such command.
6
6
.
.
7
7
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
f
f
e
e
x
x
t
t
_
_
o
o
b
b
j
j
e
e
c
c
t
t
Users could use [fext_object] command to add or delete the File Extension Object profile or
use “show” to get the profile list in the directory. Enter the profile name to open it and
modify the profile directly.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-object#fext_object add <ProfileName>
Vigor2960@config-object#fext_object delete <ProfileName>
Vigor2960@config-object#fext_object show
Vigor2960@config-object#fext_object show <ProfileName>
Vigor2960@config-object#fext_object <ProfileName>
Command Description
fext_object add
<ProfileName>
Add a new File Extension Object profile.
<ProfileName> - Enter the name of File Extension Object profile.
fext_object delete
<ProfileName>
Remove a selected File Extension Object profile.
<ProfileName> - Enter the name (e.g., fex_obj_carrie) of File
Vigor2960 Series User’s Guide
567
Extension Object profile to be deleted.
fext_object show
Display the status for all File Extension Object profiles.
fext_object show
<ProfileName>
Display the status of selected File Extension Object profile.
<ProfileName> - Enter the name (e.g., fex_obj_carrie) of File
Extension Object profile.
fext_object
<ProfilenName>
Modify detailed settings for the selected profile.
<ProfileName> - Enter the name (e.g., fex_obj_carrie) of File
Extension Object profile to be modified.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create an object profile named with “fex_obj_carrie”.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object#fext_object add fex_obj_carrie
Vigor2960@config-object-fext-fex_obj_carrie#
6
6
.
.
7
7
.
.
1
1
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
f
f
e
e
x
x
t
t
_
_
o
o
b
b
j
j
e
e
c
c
t
t
a
a
d
d
d
d
?
?
To configure detailed settings for a File Extension Object profile, users could use
[fext_object add] to create a new File Extension Object profile with detailed settings.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-object# fext_object add [image image] [video video]
[audio audio] [java java] [activex activex] [zip zip] [exe exe]
<ProfileName>
Command Description
[image image]
Specify the image file extension.
[image] - Available settings include:
.bmp/.dib/.gif/.jpeg/.jpg/.jpg2/.jp2/.pct/.pcx/.pic/.pict/.png/.tif/.tiff
[video video]
Specify the video file extension.
[video] - Available settings include:
.asf/.avi/.mov/.mpe/.mpeg/.mpg/.mp4/.qt/.rm/.wmv/.3gp/.3gpp/.3g
pp2/.3g2
[audio audio]
Specify the audio file extension.
[audio] - Available settings include:
.aac/.aiff/.au/.mp3/.m4a/.m4p/.ogg/.ra/.ram/.vox/.wav/.wma
[java java]
Specify the JAVA file extension.
[java] - Available settings include:
.class/.jad/.jar/.jav/.java/.jcm/.js/.jse/.jsp/.jtk
[activex
activex]
Specify the ActiveX file extension.
[activx] - Available settings include:
.alx/.apb/.axs/.ocx/.olb/.ole/.tlb/.viv/.vrm
[zip zip]
Specify the ZIP file extension.
[zip] - Available settings include:
Vigor2960 Series User’s Guide
568
.ace/.arj/.bzip2/.bz2/.cab/.gz/.gzip/.rar/.sit/.zip
[exe exe]
Specify the execution file extension.
[exe] - Available settings include:
.bas/.bat/.com/.exe/.inf/.pif/.reg/.scr
<ProfileName>
< ProfileName > - Enter the name (e.g., fex_obj_david) of File
Extension Object profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object#
Vigor2960@config-object# fext_object add image .bmp java .class
exe .bat fex_obj_david
Vigor2960@config-object-fext-fex_obj_david#
6
6
.
.
7
7
.
.
1
1
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
a
a
d
d
d
d
,
,
r
r
e
e
m
m
o
o
v
v
e
e
,
,
g
g
e
e
t
t
It is used for reviewing the detailed settings or modifying settings for the selected File
Extension Object profile (e.g., fex_obj_david).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-object-<ProfileName>#get
Vigor2960@config-object-<ProfileName>#activex add <activex_ext>
Vigor2960@config-object-<ProfileName>#activex remove <activex_ext>
Vigor2960@config-object-<ProfileName>#audio add <audio_ext>
Vigor2960@config-object-<ProfileName>#audio remove <audio_ext>
Vigor2960@config-object-<ProfileName>#compression add
<compression_ext>
Vigor2960@config-object-<ProfileName>#compression remove
<compression_ext>
Vigor2960@config-object-<ProfileName>#execution add <execution_ext>
Vigor2960@config-object-<ProfileName>#execution remove <execution
_ext>
Vigor2960@config-object-<ProfileName>#image add <image_ext>
Vigor2960@config-object-<ProfileName>#image remove <image_ext>
Vigor2960@config-object-<ProfileName>#java add <java_ext>
Vigor2960@config-object-<ProfileName>#java remove <java_ext>
Vigor2960@config-object-<ProfileName>#video add <video_ext>
Vigor2960@config-object-<ProfileName>#video remove <video_ext>
Command Description
get
Display current setting status of the selected profile.
activex add
<activex_ext>
Add a new type to such profile.
Specify a type for adding onto ActiveX file extension.
<activex_ext> - Specify ActiveX file extension. Available settings
include:
.alx/.apb/.axs/.ocx/.olb/.ole/.tlb/.viv/.vrm
activex remove
<activex_ext>
Remove a type from the profile.
<activex_ext> - Available settings include:
.alx/.apb/.axs/.ocx/.olb/.ole/.tlb/.viv/.vrm
Vigor2960 Series User’s Guide
569
audio add
<audio_ext>
Add a new type to such profile.
<audio_ext> - Specify the audio file extension. Available settings
include:
.aac/.aiff/.au/.mp3/.m4a/.m4p/.ogg/.ra/.ram/.vox/.wav/.wma
audio remove
<audio_ext>
Remove a type from the profile.
<audio_ext> - Specify the audio file extension. Available settings
include:
.aac/.aiff/.au/.mp3/.m4a/.m4p/.ogg/.ra/.ram/.vox/.wav/.wma
compression add
<compression_ext
>
Add a new type to such profile.
<compression_ext> - Specify the compression file extension.
Available settings include:
.ace/.arj/.bzip2/.bz2/.cab/.gz/.gzip/.rar/.sit/.zip
compression
remove
<compression_ext
>
Remove a type from the profile.
<compression_ext> - Specify the compression file extension.
Available settings include:
.ace/.arj/.bzip2/.bz2/.cab/.gz/.gzip/.rar/.sit/.zip
execution add
<execution_ext>
Add a new type to such profile.
<execution_ext> - Specify the compression file extension.
Available settings include:
.bas/.bat/.com/.exe/.inf/.pif/.reg/.scr
execution remove
<execution_ext>
Remove a type from the profile.
<execution_ext> - Specify the compression file extension.
Available settings include:
.bas/.bat/.com/.exe/.inf/.pif/.reg/.scr
image add
<image_ext>
Add a new type to such profile.
<image_ext> - Specify the image file extension. Available settings
include:
.bmp/.dib/.gif/.jpeg/.jpg/.jpg2/.jp2/.pct/.pcx/.pic/.pict/.png/.tif/.tiff
image remove
<image_ext>
Remove a type from the profile.
<image_ext> - Specify the image file extension. Available settings
include:
.bmp/.dib/.gif/.jpeg/.jpg/.jpg2/.jp2/.pct/.pcx/.pic/.pict/.png/.tif/.tiff
java add
<java_ext>
Add a new type to such profile.
<java_ext> - Specify the JAVA file extension. Available settings
include:
.class/.jad/.jar/.jav/.java/.jcm/.js/.jse/.jsp/.jtk
java remove
<java_ext>
Remove a type from the profile.
<java_ext> - Specify the JAVA file extension. Available settings
include:
.class/.jad/.jar/.jav/.java/.jcm/.js/.jse/.jsp/.jtk
video add
<video_ext>
Add a new type to such profile.
<video_ext> - Specify the video file extension. Available settings
include:
.asf/.avi/.mov/.mpe/.mpeg/.mpg/.mp4/.qt/.rm/.wmv/.3gp/.3gpp/.3g
Vigor2960 Series User’s Guide
570
pp2/.3g2
video remove
<video_ext>
Remove a type from the profile.
<video_ext> - Specify the video file extension. Available settings
include:
.asf/.avi/.mov/.mpe/.mpeg/.mpg/.mp4/.qt/.rm/.wmv/.3gp/.3gpp/.3g
pp2/.3g2
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a file extension profile named with “fex_obj_david”.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object# fext_object fex_obj_david
Vigor2960@config-object-fext-fex_obj_david#get
Vigor2960@config-object-fext-fex_obj_david# image add .gif
Vigor2960@config-object-fext-fex_obj_david# get
image : .bmp, .gif
video :
audio :
java : .class
activex :
zip :
exe : .bat
Vigor2960@config-object-fext-fex_obj_david# image remove .gif
Vigor2960@config-object-fext-fex_obj_david# get
image : .bmp
video :
audio :
java : .class
activex :
zip :
exe : .bat
Vigor2960@config-object-fext-fex_obj_david#
6
6
.
.
7
7
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
i
i
p
p
_
_
g
g
r
r
o
o
u
u
p
p
Users could use [ip_group] command to configure IP Group to add or delete the profile or
use “show” to get the profile list in the directory. Enter the profile name to open it and
modify the profile directly.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-object#ip_group add <ProfileName>
Vigor2960@config-object#ip_group delete <ProfileName>
Vigor2960@config-object#ip_group show
Vigor2960@config-object#ip_group show <ProfileName>
Vigor2960@config-object#ip_group <ProfileName>
Command Description
Vigor2960 Series User’s Guide
571
ip_group add
<ProfileName>
Add a new IP group profile.
<ProfileName> - Enter the name of IP group profile.
ip_group delete
<ProfileName>
Remove a selected IP group profile.
<ProfileName> - Enter the name (e.g., ip_grp_carrie) of IP group
profile to be deleted.
ip_group show
Display the status for all IP group profiles.
ip_group show
<ProfileName>
Display the status of selected IP group profile.
<ProfileName> - Enter the name (e.g., ip_grp_carrie) of IP group
profile.
ip_group
<ProfilenName>
Modify detailed settings for the selected profile.
<ProfileName> - Enter the name (e.g., ip_grp_carrie) of IP group
profile to be modified.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create an IP group profile named with “ip_grp_carrie”.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object#ip_group add ip_grp_carrie
Vigor2960@config-object-ipgrp-ip_grp_carrie#
6
6
.
.
7
7
.
.
2
2
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
i
i
p
p
_
_
g
g
r
r
o
o
u
u
p
p
a
a
d
d
d
d
?
?
To configure detailed settings for an IP group profile, users could use [ip_group add] to
create a new IP group profile with detailed settings.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-object#ip_group add [desc description] <ProfileName>
Command Description
[desc description]
[description] - Enter a brief description for this profile.
<ProfileName>
< ProfileName > - Enter the name (e.g., ip_grp_david) of IP
Object profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create an IP group profile named with “ip_grp_david”.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object#ip_group add desc testing ip_grp_david
Vigor2960@config-object-ipgrp-ip_grp_david# get
desc : testing
obj :
Vigor2960@config-object-ipgrp-ip_grp_david#
6
6
.
.
7
7
.
.
2
2
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
t
t
,
,
o
o
b
b
j
j
e
e
c
c
t
t
s
s
,
,
g
g
e
e
t
t
It is used for reviewing the detailed settings or modifying settings for the selected IP group
profile (e.g., ip_grp_david).
Vigor2960 Series User’s Guide
572
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-object-ipgrp-<ProfileName>#set [desc description]
Vigor2960@config-object-ipgrp-<ProfileName>#objects add <member>
Vigor2960@config-object-ipgrp-<ProfileName>#objects remove <member>
Vigor2960@config-object-ipgrp-<ProfileName>#get
Command Description
get
Get the configuration of object profile.
set
Modify settings for the selected profile.
[desc description]
Enter a brief description for this profile.
[description] – Enter the description.
objects add
<member>
Add a new IP object profile to such group profile.
[member] – Enter the name of the IP object.
objects remove
<member>
Remove an IP object profile from the selected group profile.
[member] – Enter the name of the IP object.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create an IP group profile named with “ip_grp_david”.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object#ip_group add desc testing ip_grp_david
Vigor2960@config-object# ip_group add desc testing ip_grp_david
Vigor2960@config-object-ipgrp-ip_grp_david# get
desc : testing
obj :
Vigor2960@config-object-ipgrp-ip_grp_david#
Vigor2960@config-object-ipgrp-ip_grp_david# objects add IP_carrieg
Vigor2960@config-object-ipgrp-ip_grp_david# get
desc : testing
obj : IP_carrie
Vigor2960@config-object-ipgrp-ip_grp_david#
6
6
.
.
7
7
.
.
3
3
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
i
i
p
p
_
_
o
o
b
b
j
j
e
e
c
c
t
t
Users could use [ip_object] command to add or delete the IP Object profile or use “show” to
get the profile list in the directory. Enter the profile name to open it and modify the profile
directly.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-object#ip_object add <ProfileName>
Vigor2960@config-object#ip_object delete <ProfileName>
Vigor2960@config-object#ip_object show
Vigor2960@config-object#ip_object show <ProfileName>
Vigor2960@config-object#ip_object <ProfileName>
Command Description
Vigor2960 Series User’s Guide
573
ip_object add
<ProfileName>
Add a new IP Object profile.
<ProfileName> - Enter the name of IP Object profile.
ip_object delete
<ProfileName>
Remove a selected IP Object profile.
<ProfileName> - Enter the name (e.g., ip_obj_carrie) of IM
Object profile to be deleted.
ip_object show
Display the status for all IP Object profiles.
ip_object show
<ProfileName>
Display the status of selected IP Object profile.
<ProfileName> - Enter the name (e.g., ip_obj_carrie) of IP Object
profile.
ip_object
<ProfilenName>
Modify detailed settings for the selected profile.
<ProfileName> - Enter the name (e.g., ip_obj_carrie) of IP Object
profile to be modified.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create an IP object profile named with “ip_obj_carrie”.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object#ip_object add ip_obj_carrie
Vigor2960@config-object-ipobj-ip_obj_carrie#
6
6
.
.
7
7
.
.
3
3
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
i
i
p
p
_
_
o
o
b
b
j
j
e
e
c
c
t
t
a
a
d
d
d
d
?
?
To configure detailed settings for an IP Object profile, users could use [ip_object add] to
create a new IP Object profile with detailed settings.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-object#ip_object add [type type] [sip start_ip] [eip
end_ip] [mask mask] <ProfileName>
Command Description
[type type]
Specify the address type for the IP object.
[type] – Available settings include:
Single – If it is selected, please set [sip start_ip].
Range – If it is selected, please set [sip start_ip] and eip [eip
end_ip].
Subnet – If it is selected, please set [mask mask].
[sip start_ip]
Specify an IP address as the starting point.
[start_ip] – Enter an IP address.
[eip end_ip]
Specify an IP address as the ending point.
[end_ip]- Enter an IP address.
[mask mask]
Specify an IP address as Subnet Mask.
[mask] – Enter the subnet mask.
<ProfileName>
< ProfileName > - Enter the name (e.g., ip_obj_david) of IP
Object profile.
Vigor2960 Series User’s Guide
574
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create an IP object profile named with “ip_obj_david”.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object#ip_object add type single sip 192.168.1.72
ip_obj_david
Vigor2960@config-object-ipobj-ip_obj_david#
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
t
t
,
,
g
g
e
e
t
t
It is used for reviewing the detailed settings or modifying settings for the selected profile
(e.g., ip_obj_david).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-object-ipobj-<ProfileName>#set [type type] [sip
start_ip] [eip end_ip] [mask mask]
Vigor2960@config-object-ipobj-<ProfileName>#get
Command Description
<ProfileName>
Display the name of the profile.
get
Get the configuration of object profile.
set
Modify settings for the selected profile.
[type type]
Specify the address type for the IP object.
[type] - Available settings include:
Single – If it is selected, please set [sip start_ip].
Range – If it is selected, please set [sip start_ip] and eip [eip
end_ip].
Subnet – If it is selected, please set [mask mask].
[sip start_ip]
Specify an IP address as the starting point.
[start_ip] – Enter an IP address.
[eip end_ip]
Specify an IP address as the ending point.
[end_ip]- Enter an IP address.
[mask mask]
Specify an IP address as Subnet Mask.
[mask] – Enter the subnet mask.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create an IP object profile named with “ip_obj_david”.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object#ip_object add type single sip 192.168.1.72
ip_obj_david Vigor2960@config-object-ipobj-ip_obj_david#
Vigor2960@config-object-ipobj-ip_obj_david# get
type : Single
sip : 192.168.1.72
eip :
Vigor2960 Series User’s Guide
575
mask :
6
6
.
.
7
7
.
.
4
4
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
k
k
e
e
y
y
w
w
o
o
r
r
d
d
_
_
o
o
b
b
j
j
e
e
c
c
t
t
Users could use [keyword_object] command to add or delete keyword object profile or use
“show” to get the profile list in the directory. Enter the profile name to open it and modify
the profile directly.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-object#
Vigor2960@config-object#keyword_object add <ProfileName>
Vigor2960@config-object#keyword_object delete <ProfileName>
Vigor2960@config-object#keyword_object show
Vigor2960@config-object#keyword_object show <ProfileName>
Vigor2960@config-object#keyword_object <ProfileName>
Command Description
keyword_object
add <ProfileName>
Add a new keyword object profile.
<ProfileName> - Enter the name of keyword object profile.
keyword_object
delete
<ProfileName>
Remove a selected keyword object profile.
<ProfileName> - Enter the name (e.g., key_obj_carrie) of
keyword object profile to be deleted.
keyword_object
show
Display the status for all keyword object profiles.
keyword_object
show
<ProfileName>
Display the status of selected keyword object profile.
<ProfileName> - Enter the name (e.g., key_obj_carrie) of
keyword object profile.
keyword_object
<ProfilenName>
Modify detailed settings for the selected profile.
<ProfileName> - Enter the name (e.g., key_obj_carrie) of
keyword object profile to be modified.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a keyword object profile named with “key_obj_carrie”.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object#keyword_object add key_obj_carrie
Vigor2960@config-object-kwobj-key_obj_carrie#
6
6
.
.
7
7
.
.
4
4
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
k
k
e
e
y
y
w
w
o
o
r
r
d
d
_
_
o
o
b
b
j
j
e
e
c
c
t
t
a
a
d
d
d
d
?
?
To configure detailed settings for a keyword object profile, users could use [keyword_object
add] to create a new keyword object profile with detailed settings.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-object#keyword_object add [member member]
<ProfileName>
Command Description
Vigor2960 Series User’s Guide
576
[member member]
The object is used to match the keywords in the whole URL.
[member]- Enter the string for a keyword.
<ProfileName>
< ProfileName > - Enter the name (e.g., key_obj_david) of
keyword object profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a keyword object profile named with “key_obj_teacher”.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object# keyword_object add member great
key_obj_teacher
Vigor2960@config-object-kwobj-key_obj_teacher# get
member : great
Vigor2960@config-object-kwobj-key_obj_teacher#
6
6
.
.
7
7
.
.
4
4
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
m
m
e
e
m
m
b
b
e
e
r
r
,
,
g
g
e
e
t
t
It is used for reviewing the detailed settings or modifying settings for the selected keyword
object profile (e.g., key_obj_david).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-object-kwobj-<ProfileName>#member add <member>
Vigor2960@config-object-kwobj-<ProfileName>#member remove <member>
Vigor2960@config-object-kwobj-<ProfileName>#get
Command Description
get
Get the configuration of object profile.
member add
<member>
Add a string as a keyword and add onto such profile.
<member> - Enter a string.
member remove
<member>
Remove a keyword from such profile.
<member> - Enter a string.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a keyword object profile named with “key_obj_carrie”.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object#keyword_object add key_obj_david
Vigor2960@config-object-kwobj-key_obj_david# member add test
Vigor2960@config-object-kwobj-key_obj_david# get
member : test
Vigor2960@config-object-kwobj-key_obj_david#
Vigor2960 Series User’s Guide
577
6
6
.
.
7
7
.
.
5
5
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
r
r
v
v
i
i
c
c
e
e
_
_
g
g
r
r
o
o
u
u
p
p
Users could use [service_group] command to add or delete the Service Group profile or use
“show” to get the profile list in the directory. Enter the profile name to open it and modify
the profile directly.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-object#service_group add <ProfileName>
Vigor2960@config-object#service_group delete <ProfileName>
Vigor2960@config-object#service_group show
Vigor2960@config-object#service_group show <ProfileName>
Vigor2960@config-object#service_group <ProfileName>
Command Description
service_group add
<ProfileName>
Add a new service group profile.
<ProfileName> - Enter the name of service group profile.
service_group
delete
<ProfileName>
Remove a selected ervice group profile.
<ProfileName> - Enter the name (e.g., ser_grp_carrie) of service
group profile to be deleted.
service_group show
Display the status for all service group profiles.
service_group show
<ProfileName>
Display the status of selected service group profile.
<ProfileName> - Enter the name (e.g., ser_grp_carrie) of service
group profile.
service_group
<ProfilenName>
Modify detailed settings for the selected profile.
<ProfileName> - Enter the name (e.g., ser_grp_carrie) of service
group profile to be modified.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a service group profile named with “ser_grp_carrie”.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object#service_group add ser_grp_carrie
Vigor2960@config-object-srvgrp-ser_grp_carrie#
6
6
.
.
7
7
.
.
5
5
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
r
r
v
v
i
i
c
c
e
e
_
_
g
g
r
r
o
o
u
u
p
p
a
a
d
d
d
d
?
?
To configure detailed settings for a service group profile, users could use [service_group add]
to create a new service group profile with detailed settings.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-object# service_group add [desc description]
<ProfileName>
Command Description
[desc description]
Set a brief description for such service group.
[description] – Enter the description.
<ProfileName>
< ProfileName > - Enter the name (e.g., ser_grp_david) of service
group profile.
Vigor2960 Series User’s Guide
578
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a service group profile named with “ser_grp_david”.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object# service_group add desc combine_all
ser_grp_david
Vigor2960@config-object-srvgrp-ser_grp_david#
6
6
.
.
7
7
.
.
5
5
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
t
t
,
,
o
o
b
b
j
j
e
e
c
c
t
t
s
s
,
,
g
g
e
e
t
t
It is used for reviewing the detailed settings or modifying settings for the selected service
group profile (e.g., ser_grp_david).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-object-srvgrp-<ProfileName>#set [desc description]
Vigor2960@config-object-srvgrp-<ProfileName>#objects add <member>
Vigor2960@config-object-srvgrp-<ProfileName>#objects remove <member>
Vigor2960@config-object-srvgrp-<ProfileName>#get
Command Description
get
Get the configuration of object profile.
set
Modify settings for the selected profile.
[desc description]
Enter a brief description for such group.
objects add
<member>
Add a new service object profile (e.g., ser_obj_carrie) to such
group profile.
<member> - Enter the name of service object profile.
objects remove
<member>
Remove a service object profile from the selected group profile.
<member> - Enter the name of service object profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a service group profile named with “ser_grp_david”.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object# service_group add desc combine_all
ser_grp_david
Vigor2960@config-object-srvgrp-ser_grp_david# objects add
ser_obj_carrie
Vigor2960@config-object-srvgrp-ser_grp_david# get
desc : combine_all
obj : ser_obj_carrie
Vigor2960@config-object-srvgrp-ser_grp_david#
6
6
.
.
7
7
.
.
6
6
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
r
r
v
v
i
i
c
c
e
e
_
_
o
o
b
b
j
j
e
e
c
c
t
t
Users could use [service_object] command to add or delete the Service Type Object profile
or use “show” to get the profile list in the directory. Enter the profile name to open it and
modify the profile directly.
Vigor2960 Series User’s Guide
579
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-object#service_object add <ProfileName>
Vigor2960@config-object#service_object delete <ProfileName>
Vigor2960@config-object#service_object show
Vigor2960@config-object#service_object show <ProfileName>
Vigor2960@config-object#service_object <ProfileName>
Command Description
service_object add
<ProfileName>
Add a new service object profile.
<ProfileName> - Enter the name of service object profile.
service_object
delete
<ProfileName>
Remove a selected service object profile.
<ProfileName> - Enter the name (e.g., ser_obj_carrie) of service
object profile to be deleted.
service_object show
Display the status for all service object profiles.
service_object show
<ProfileName>
Display the status of selected service object profile.
<ProfileName> - Enter the name (e.g., ser_obj_carrie) of service
object profile.
service_object
<ProfilenName>
Modify detailed settings for the selected profile.
<ProfileName> - Enter the name (e.g., ser_obj_carrie) of service
object profile to be modified.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a service object profile named with “ser_obj_carrie”.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object#
Vigor2960@config-object# service_object add ser_obj_carrie
Vigor2960@config-object-srvobj-ser_obj_carrie#
6
6
.
.
7
7
.
.
6
6
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
r
r
v
v
i
i
c
c
e
e
_
_
o
o
b
b
j
j
e
e
c
c
t
t
a
a
d
d
d
d
?
?
To configure detailed settings for a service object profile, users could use [service_object
add] to create a new service object profile with detailed settings.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-object#service_object add [proto protocol] [spt_start
src_port_start] [spt_end src_port_end] [dpt_start dest_port_start]
[dpt_end dest_port_end] <ProfileName>
Command Description
[proto protocol]
Speicify a protocol for such object.
[protocol] - Available settings include:
TCP/UDP
TCP
UDP
ICMP
[spt_start
src_port_start]
Enter a value as starting point for source port.
[src_port_start] - Enter a number (range from 0 – 65535 )
Vigor2960 Series User’s Guide
580
[spt_end
src_port_end]
Enter a value as the ending point for source port.
[src_port_end] - Enter a number (range from 0 – 65535 )
[dpt_start
dest_port_start]
Enter a value as starting point for destination port.
[dest_port_start] - Enter a number (range from 0 – 65535 )
[dpt_end
dest_port_end]
Enter a value as ending point for destination port.
[dest_port_end] - Enter a number (range from 0 – 65535 )
<ProfileName>
< ProfileName > - Enter the name (e.g., pro_obj_david) of service
object profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a protocol object profile named with “ser_obj_david”.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object#service_object add proto TCP/UDP
ser_obj_david
Vigor2960@config-object-srvobj-ser_obj_david#
6
6
.
.
7
7
.
.
6
6
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
t
t
,
,
g
g
e
e
t
t
It is used for reviewing the detailed settings or modifying settings for the selected service
object profile (e.g., ser_obj_david).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-object-srvobj-<ProfileName>#proto [proto protocol]
[spt_start src_port_start] [spt_end src_port_end] [dpt_start
dest_port_start] [dpt_end dest_port_end]
Vigor2960@config-object-srvobj-<ProfileName>#get
Command Description
<ProfileName>
Display the name of the profile.
get
Get the configuration of object profile.
set
Modify settings for the selected profile.
[proto protocol]
Speicify a protocol for such object.
[protocol] - Available settings include:
TCP/UDP
TCP
UDP
ICMP
[spt_start
src_port_start]
Enter a value as starting point for source port.
[src_port_start] - Enter a number (range from 0 – 65535 )
[spt_end
src_port_end]
Enter a value as the ending point for source port.
[src_port_end] - Enter a number (range from 0 – 65535 )
[dpt_start
dest_port_start]
Enter a value as starting point for destination port.
[dest_port_start] - Enter a number (range from 0 – 65535 )
[dpt_end
dest_port_end]
Enter a value as ending point for destination port.
[dest_port_end] - Enter a number (range from 0 – 65535 )
Vigor2960 Series User’s Guide
581
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a service object profile named with “ser_obj_david”.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object#service_object add proto TCP/UDP
ser_obj_david
Vigor2960@config-object-srvobj-ser_obj_david# get
proto : TCP/UDP
spt_start : 1
spt_end : 65535
dpt_start : 1
dpt_end : 65535
Vigor2960@config-object-srvobj-ser_obj_david#set proto TCP/UDP
spt_start 50
set done
Vigor2960@config-object-srvobj-ser_obj_david# get
proto : TCP/UDP
spt_start : 50
spt_end : 65535
dpt_start : 1
dpt_end : 65535
6
6
.
.
7
7
.
.
7
7
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
t
t
i
i
m
m
e
e
_
_
g
g
r
r
o
o
u
u
p
p
Users could use [time_group] command to add or delete the Time Group profile or use
“show” to get the profile list in the directory. Enter the profile name to open it and modify
the profile directly.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-object#time_group add <ProfileName>
Vigor2960@config-object#time_group delete <ProfileName>
Vigor2960@config-object#time_group show
Vigor2960@config-object#time_group show <ProfileName>
Vigor2960@config-object#time_group <ProfileName>
Command Description
time_group add
<ProfileName>
Add a new time group profile.
<ProfileName> - Enter the name of time group profile.
time_group delete
<ProfileName>
Remove a selected time group profile.
<ProfileName> - Enter the name (e.g., time_grp_carrie) of time
group profile to be deleted.
time_group show
Display the status for all time group profiles.
time_group show
<ProfileName>
Display the status of selected time group profile.
<ProfileName> - Enter the name (e.g., time_grp_carrie) of time
group profile.
time_group
<ProfilenName>
Modify detailed settings for the selected profile.
<ProfileName> - Enter the name (e.g., time_grp_carrie) of time
group profile to be modified.
Vigor2960 Series User’s Guide
582
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a time group profile named with “time_grp_carrie”.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object# time_group add time_grp_carrie
Vigor2960@config-object-timegrp-time_grp_carrie#
6
6
.
.
7
7
.
.
7
7
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
t
t
i
i
m
m
e
e
_
_
g
g
r
r
o
o
u
u
p
p
a
a
d
d
d
d
?
?
To configure detailed settings for a time group profile, users could use [time_group add] to
create a new time group profile with detailed settings.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-object#time_group [desc description] <ProfileName>
Command Description
[desc description]
Enter a brief description for such group.
<ProfileName>
< ProfileName > - Enter the name (e.g., time_grp_david) of time
group profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a time group profile named with “time_grp_david”.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object#time_group add desc gameplay time_grp_david
Vigor2960@config-object-timegrp-time_grp_david#
6
6
.
.
7
7
.
.
7
7
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
t
t
,
,
o
o
b
b
j
j
e
e
c
c
t
t
s
s
,
,
g
g
e
e
t
t
It is used for reviewing the detailed settings or modifying settings for the selected time group
profile (e.g., time_grp_david).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-object-timegrp-<ProfileName>#set [desc description]
Vigor2960@config-object-timegrp-<ProfileName>#objects add <member>
Vigor2960@config-object-timegrp-<ProfileName>#objects remove <member>
Vigor2960@config-object-timegrp-<ProfileName>#get
Command Description
<ProfileName>
Display the name of the profile.
get
Get the configuration of object profile.
set
Modify settings for the selected profile.
[desc description]
Enter a brief description for such group.
objects add
<member>
Add a new time object profile (e.g., time_obj_carrie) to such
group profile.
<member> - Enter the name of the object profile.
objects remove
Remove a time object profile from the selected group profile.
Vigor2960 Series User’s Guide
583
<member>
<member> - Enter the name of the object profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a service object profile named with “time_grp_david”.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object#time_group add desc gameplay time_grp_david
Vigor2960@config-object-timegrp-time_grp_david#objects add
time_obj_carrie
Vigor2960@config-object-timegrp-time_grp_david#objects add
time_obj_david
Vigor2960@config-object-timegrp-time_grp_david#get
desc : gameplay_time
obj : time_obj_carrie, time_obj_david
Vigor2960@config-object-timegrp-time_grp_david#
6
6
.
.
7
7
.
.
8
8
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
t
t
i
i
m
m
e
e
_
_
o
o
b
b
j
j
e
e
c
c
t
t
Users could use [time_object] command to add or delete the Time Object profile or use
“show” to get the profile list in the directory. Enter the profile name to open it and modify
the profile directly.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-object#time_object add <ProfileName>
Vigor2960@config-object#time_object delete <ProfileName>
Vigor2960@config-object#time_object show
Vigor2960@config-object#time_object show <ProfileName>
Vigor2960@config-object#time_object <ProfileName>
Command Description
time_object add
<ProfileName>
Add a new time object profile.
<ProfileName> - Enter the name of time object profile.
time_object delete
<ProfileName>
Remove a selected time object profile.
<ProfileName> - Enter the name (e.g., time_obj_carrie) of time
object profile to be deleted.
time_object show
Display the status for all time object profiles.
time_object show
<ProfileName>
Display the status of selected time object profile.
<ProfileName> - Enter the name (e.g., time_obj_carrie) of time
object profile.
time_object
<ProfilenName>
Modify detailed settings for the selected profile.
<ProfileName> - Enter the name (e.g., time_obj_carrie) of time
object profile to be modified.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a time object profile named with “time_obj_carrie”.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object#
Vigor2960 Series User’s Guide
584
Vigor2960@config-object# time_object add time_obj_carrie
Vigor2960@config-object-timeobj-time_obj_carrie#
6
6
.
.
7
7
.
.
8
8
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
t
t
i
i
m
m
e
e
_
_
o
o
b
b
j
j
e
e
c
c
t
t
a
a
d
d
d
d
?
?
To configure detailed settings for a time object profile, users could use [time_object add] to
create a new time object profile with detailed settings.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-object# time_object add [freq frequency] [sdate
startdate] [stime starttime] [edate enddate] [etime endtime]
<ProfileName>
Command Description
[freq frequency]
Define the work frequency.
[frequency] - Available settings include:
Once
Weekdays
[sdate startdate]
Define the starting date for such time object.
[startdate] - Enter the data with the format of “YYYY-MM-DD”,
e.g. 1979-01-01
[stime starttime]
Define the starting time for such time object.
[starttime] - Enter the time with the format of “HH:MM:MM”,
e.g. 23:59:59
[edate enddate]
Define the ending date for such time object.
[enddate] - Enter the data with the format of “YYYY-MM-DD”,
e.g. 1979-01-01
[etime endtime]
Define the ending time for such time object.
[endtime] - Enter the time with the format of “HH:MM:MM”,
e.g. 23:59:59
<ProfileName>
< ProfileName > - Enter the name (e.g., time_obj_david) of time
object profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a time object profile named with “time_obj_david”.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object#
Vigor2960@config-object# time_object add freq once time_obj_david
Vigor2960@config-object-timeobj-time_obj_david#
6
6
.
.
7
7
.
.
8
8
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
t
t
,
,
w
w
e
e
e
e
k
k
d
d
a
a
y
y
s
s
,
,
g
g
e
e
t
t
It is used for reviewing the detailed settings or modifying settings for the selected time object
profile (e.g., time_obj_david).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960 Series User’s Guide
585
Vigor2960@config-object-timeobj-<ProfileName>#set [freq frequency]
[sdate startdate] [stime starttime] [edate enddate] [etime endtime]
Vigor2960@config-object-timeobj-<ProfileName>#weekdays add
<weekdays>
Vigor2960@config-object-timeobj-<ProfileName>#weekdays remove
<weekdays>
Vigor2960@config-object-timeobj-<ProfileName>#get
Command Description
<ProfileName>
Display the name of the profile.
get
Get the configuration of object profile.
set
Modify settings for the selected profile.
[freq frequency]
Define the work frequency.
[frequency] - Available settings include:
Once
Weekdays
[sdate startdate]
Define the starting date for such time object.
[startdate] - Enter the data with the format of “YYYY-MM-DD”,
e.g. 1979-01-01
[stime starttime]
Define the starting time for such time object.
[starttime] - Enter the time with the format of “HH:MM:MM”,
e.g. 23:59:59
[edate enddate]
Define the ending date for such time object.
[enddate] - Enter the data with the format of “YYYY-MM-DD”,
e.g. 1979-01-01
[etime endtime]
Define the ending time for such time object.
[endtime] - Enter the time with the format of “HH:MM:MM”,
e.g. 23:59:59
weekdays add
<weekdays>
Specify which day shall be included in such profile.
<weekdays> - Available settings include:
Mon
Tue
Wed
Thu
Fri
Sat
Sun
weekdays remove
<weekdays>
Specify which day shall be removed in such profile.
<weekdays> - Available settings include:
Mon
Tue
Wed
Thu
Fri
Sat
Vigor2960 Series User’s Guide
586
Sun
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a service object profile named with “ser_obj_david”.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object#
Vigor2960@config-object# time_object add freq once time_obj_david
Vigor2960@config-object-timeobj-time_obj_david#
Vigor2960@config-object-timeobj-time_obj_david# get
freq : Once
sdate : 2010-01-01
stime : 00:00:00
edate : 2010-01-01
etime : 00:00:00
weekdays :
Vigor2960@config-object-timeobj-time_obj_david#set sdate 2017-11-28
stime 12:00:00
set done
Vigor2960@config-object-timeobj-time_obj_david#weekdays add mon
Vigor2960@config-object-timeobj-time_obj_david#get
freq : Once
sdate : 2017-11-28
stime : 12:00:00
edate : 2010-01-01
etime : 00:00:00
weekdays : Mon
Vigor2960@config-object-timeobj-time_obj_david#
6
6
.
.
7
7
.
.
9
9
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
w
w
e
e
b
b
_
_
c
c
a
a
t
t
e
e
g
g
o
o
r
r
y
y
Users could use [web_category] command to add or delete the Web Category Object profile
or use “show” to get the profile list in the directory. Enter the profile name to open it and
modify the profile directly.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-object#web_category add <ProfileName>
Vigor2960@config-object#web_category delete <ProfileName>
Vigor2960@config-object#web_category show
Vigor2960@config-object#web_category show <ProfileName>
Vigor2960@config-object#web_category <ProfileName>
Command Description
web_categroy add
<ProfileName>
Add a new web category object profile.
<ProfileName> - Enter the name of web category profile.
web_categroy delete
<ProfileName>
Remove a selected web category profile.
<ProfileName> - Enter the name (e.g., web_obj_carrie) of web
category profile to be deleted.
web_categroy show
Display the status for all web category profiles.
Vigor2960 Series User’s Guide
587
web_categroy show
<ProfileName>
Display the status of selected web category profile.
<ProfileName> - Enter the name (e.g., web_obj_carrie) of web
category profile.
web_categroy
<ProfilenName>
Modify detailed settings for the selected profile.
<ProfileName> - Enter the name (e.g., web_obj_carrie) of web
category profile to be modified.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a web category object profile named with “web_obj_carrie”.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object#web_category add web_obj_carrie
Vigor2960@config-object-webcate-web_obj_carrie#
6
6
.
.
7
7
.
.
9
9
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
w
w
e
e
b
b
_
_
c
c
a
a
t
t
e
e
g
g
o
o
r
r
y
y
a
a
d
d
d
d
?
?
To configure detailed settings for a web category object profile, users could use
[web_category add] to create a new object profile with detailed settings.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-object# web_category add [childp child_protect]
[leisure leisure] [business business] [chat chat] [computer computer]
[other other] <ProfileName>
Command Description
[childp
child_protect]
Select category to filter the web page for children protection.
Available setting include:
Alcohol_And_Tobacco/Criminal_And_Activity/Gambling/Hate_
And_Intolerance/Illegal_Drug/Nudity/Pornography_And_Sexuall
y_explicit/Violence/Weapons/School_Cheating/Sex_Education/Ta
steless/Child_Abuse_Images
[leisure leisure]
Select category to filter the web page related to leisure matters.
Available setting include:
Entertainment
Games
Sports
Travel
Leisure_And_Recreation
Fashion_And_Beauty
[business business]
Select category to filter the web page related to business.
Available setting include:
Business
Job_Search
Web_Based_Email
[chat chat]
Select category to filter the web page related to chatting tool.
Available setting include:
Chat
Vigor2960 Series User’s Guide
588
Instant_Messaging
[computer
computer]
Select category to filter the web page related to computer.
Available setting include:
Anonymizers/Forums_And_Newsgroups/Computers_And_Techn
ology/Down_sites/Streaming_Media_And_Downloads/Phishing_
And_Fraud/Search_engines_And_Portals/Social_Networking/Spa
m_sites/Malware/Botnets/Hacking/Illegal_Softwares/Information
_Security/Peer_to_Peer
[other other]
Select category to filter the web page for special purpose.
Available setting include:
Advertisement_And_Pop_Ups/Arts/Transportation/Compromised/
Dating_And_Personals/Education/Finance/Government/Health_A
nd_Medicine/News/Non_profits_And_NGOs/Persional_Sites/Poli
tics/Real_Estate/Religion/Restaurants_And_Dining/Shopping/Tra
nslators/General/Cults/Greeting_Cards/Image_Sharing/Network_
Errors/Parked_Domains/Private_IP_Address/Uncategorised_Sites
<ProfileName>
< ProfileName > - Enter the name (e.g., web_obj_david) of web
category object profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a web category object profile named with “web_obj_david”.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object#
Vigor2960@config-object# web_category add childp Alcohol_And_Tobacco
web_obj_david
Vigor2960@config-object-webcate-web_obj_david#
6
6
.
.
7
7
.
.
9
9
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
b
b
u
u
s
s
i
i
n
n
e
e
s
s
s
s
,
,
c
c
h
h
a
a
t
t
,
,
c
c
h
h
i
i
l
l
d
d
_
_
p
p
r
r
o
o
t
t
e
e
c
c
t
t
,
,
c
c
o
o
m
m
p
p
u
u
t
t
e
e
r
r
,
,
l
l
e
e
i
i
s
s
u
u
r
r
e
e
,
,
o
o
t
t
h
h
e
e
r
r
,
,
g
g
e
e
t
t
It is used for reviewing the detailed settings or modifying settings for the selected web
category object profile (e.g., web_obj_david).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-object-webcate-<ProfileName>#business add
<category_type>
Vigor2960@config-object-webcate-<ProfileName>#business remove
<category_type>
Vigor2960@config-object-webcate-<ProfileName>#chat add
<category_type>
Vigor2960@config-object-webcate-<ProfileName>#chat remove
<category_type>
Vigor2960@config-object-webcate-<ProfileName>#child_protect add
<category_type>
Vigor2960@config-object-webcate-<ProfileName>#child_protect remove
<category_type>
Vigor2960@config-object-webcate-<ProfileName>#computer add
<category_type>
Vigor2960@config-object-webcate-<ProfileName>#computer remove
<category_type>
Vigor2960 Series User’s Guide
589
Vigor2960@config-object-webcate-<ProfileName>#leisure add
<category_type>
Vigor2960@config-object-webcate-<ProfileName>#leisure remove
<category_type>
Vigor2960@config-object-webcate-<ProfileName>#other add
<category_type>
Vigor2960@config-object-webcate-<ProfileName>#other remove
<category_type>
Vigor2960@config-object-webcate-<ProfileName>#get
Command Description
<ProfileName>
Display the name of the profile.
get
Get the configuration of object profile.
business add
<category_type>
Add a category to such profile.
<category_type> - Select a category to filter the web page related
to business. Available setting include:
Business
Job_Search
Web_Based_Email
business remove
<category_type>
Remove a category from such profile.
<category_type> - Select a category to filter the web page related
to business. Available setting include:
Business
Job_Search
Web_Based_Email
chat add
<category_type>
Add a category to such profile.
<category_type> - Select a category to filter the web page related
to chatting tool. Available setting include:
Chat
Instant_Messaging
chat remove
<category_type>
Remove a category from such profile.
<category_type> - Select a category to filter the web page related
to chatting tool. Available setting include:
Chat
Instant_Messaging
child_protect add
<category_type>
Add a category to such profile.
<category_type> - Select category to filter the web page for
children protection. Available setting include:
Alcohol_And_Tobacco/Criminal_And_Activity/Gambling/Hate_
And_Intolerance/Illegal_Drug/Nudity/Pornography_And_Sexuall
y_explicit/Violence/Weapons/School_Cheating/Sex_Education/Ta
steless/Child_Abuse_Images
child_protect
remove
<category_type>
Remove a category from such profile.
<category_type> - Select category to filter the web page for
children protection. Available setting include:
Alcohol_And_Tobacco/Criminal_And_Activity/Gambling/Hate_
And_Intolerance/Illegal_Drug/Nudity/Pornography_And_Sexuall
Vigor2960 Series User’s Guide
590
y_explicit/Violence/Weapons/School_Cheating/Sex_Education/Ta
steless/Child_Abuse_Images
computer add
<category_type>
Add a category to such profile.
<category_type> - Select category to filter the web page related to
computer. Available setting include:
Anonymizers/Forums_And_Newsgroups/Computers_And_Techn
ology/Down_sites/Streaming_Media_And_Downloads/Phishing_
And_Fraud/Search_engines_And_Portals/Social_Networking/Spa
m_sites/Malware/Botnets/Hacking/Illegal_Softwares/Information
_Security/Peer_to_Peer
computer remove
<category_type>
Remove a category from such profile.
<category_type> - Select category to filter the web page related to
computer. Available setting include:
Anonymizers/Forums_And_Newsgroups/Computers_And_Techn
ology/Down_sites/Streaming_Media_And_Downloads/Phishing_
And_Fraud/Search_engines_And_Portals/Social_Networking/Spa
m_sites/Malware/Botnets/Hacking/Illegal_Softwares/Information
_Security/Peer_to_Peer
leisure add
<category_type>
Add a category to such profile.
<category_type> - Select category to filter the web page related to
leisure matters. Available setting include:
Entertainment
Games
Sports
Travel
Leisure_And_Recreation
Fashion_And_Beauty
leisure remove
<category_type>
Remove a category from such profile.
<category_type> - Select category to filter the web page related to
leisure matters. Available setting include:
Entertainment
Games
Sports
Travel
Leisure_And_Recreation
Fashion_And_Beauty
other add
<category_type>
Add a category to such profile.
<category_type> - Select category to filter the web page for
special purpose. Available setting include:
Advertisement_And_Pop_Ups/Arts/Transportation/Compromised/
Dating_And_Personals/Education/Finance/Government/Health_A
nd_Medicine/News/Non_profits_And_NGOs/Persional_Sites/Poli
tics/Real_Estate/Religion/Restaurants_And_Dining/Shopping/Tra
nslators/General/Cults/Greeting_Cards/Image_Sharing/Network_
Errors/Parked_Domains/Private_IP_Address/Uncategorised_Sites
other remove
Remove a category from such profile.
Vigor2960 Series User’s Guide
591
<category_type>
<category_type> - Select category to filter the web page for
special purpose. Available setting include:
Advertisement_And_Pop_Ups/Arts/Transportation/Compromised/
Dating_And_Personals/Education/Finance/Government/Health_A
nd_Medicine/News/Non_profits_And_NGOs/Persional_Sites/Poli
tics/Real_Estate/Religion/Restaurants_And_Dining/Shopping/Tra
nslators/General/Cults/Greeting_Cards/Image_Sharing/Network_
Errors/Parked_Domains/Private_IP_Address/Uncategorised_Sites
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a web category bject profile named with “web_obj_david”.
Vigor2960>enable
Vigor2960# configure object_setting
Vigor2960@config-object#
Vigor2960@config-object# web_category add childp Alcohol_And_Tobacco
web_obj_david
Vigor2960@config-object-webcate-web_obj_david#business add
Web_Based_Email
Vigor2960@config-object-webcate-web_obj_david#computer add
Peer_to_Peer
Vigor2960@config-object-webcate-web_obj_david#leisure add
Leisure_And_Recreation
Vigor2960@config-object-webcate-web_obj_david#get
childp : Alcohol_And_Tobacco
leisure : Leisure_And_Recreation
business : Web_Based_Email
chat :
computer : Peer_to_Peer
other :
Vigor2960@config-object-webcate-web_obj_david#
Vigor2960 Series User’s Guide
592
6
6
.
.
8
8
U
U
s
s
e
e
r
r
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
User Management can manage all the accounts (user profiles) to connect to Internet via
different protocols.
To make user management configuration, you have to type “
configure user” to access
into next phase.
Vigor2960>enable
Vigor2960# configure user
Vigor2960@config-user#
.
There are several functions for user management – users, group.
Available sub-commands under User include:
- users (refer to 6.8.1)
- group (refer to 6.8.2)
Note:
[XXX XXX] - [ ] means such command is optional. The former is command itself; the
latter is value/selection for such command.
<XXX XXX> - < > means such command is required. The former is command itself;
the latter is value/selection for such command.
6
6
.
.
8
8
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
u
u
s
s
e
e
r
r
s
s
Users could use [users] command to add or delete the User Account Profile or use “show” to
get the profile list in the directory. Enter the profile name to open it and modify the profile
directly.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-user#users add <ProfileName>
Vigor2960@config-user#users delete <ProfileName>
Vigor2960@config-user#users show
Vigor2960@config-user#users show <ProfileName>
Vigor2960@config-user#users <ProfileName>
Command Description
users add
<ProfileName>
Add a new user account profile.
<ProfileName> - Enter the name of user account profile.
users delete
<ProfileName>
Remove a selected user account profile.
<ProfileName> - Enter the name (e.g., user_carrie) of user
account profile to be deleted.
users show
Display the status for all user account profiles.
users show
<ProfileName>
Display the status of selected user account profile.
<ProfileName> - Enter the name (e.g., user_carrie) of user
account profile.
users
<ProfileName>
Modify detailed settings for the selected profile.
<ProfileName> - Enter the name (e.g., user_carrie) of user
Vigor2960 Series User’s Guide
593
account profile to be modified.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a user account profile named with “user_carrie”.
Vigor2960>enable
Vigor2960# configure user
Vigor2960@config-user# users add user_carrie
Vigor2960@config-usr-user_carrie#
6
6
.
.
8
8
.
.
1
1
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
u
u
s
s
e
e
r
r
s
s
a
a
d
d
d
d
?
?
To configure detailed settings for a user account profile, users could use [user add] to create
a new users account profile with detailed settings.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-user# users add [status status] [pass password]
[sysuser sysuser] [group group] [guest_op guest_op] [timeout timeout]
[if pptpif] [fixip fixip] [user_mnt_status user_mnt_status]
[user_enable_time_quota user_enable_time_quota] [user_set_time_quota
user_set_time_quota] [login_quota login_quota] [forced_logout
forced_logout] [pptp pptp] [l2tp l2tp] [ssltunnel ssltunnel] [openvpn
openvpn] [ipsec ipsec] [motp en_motp] [pin motp_pin] [secret motp_secret]
[time_obj time_obj] [sslproxy ssl_proxy] [ssl_vnc ssl_vnc] [ssl_rdp
ssl_rdp] [remote_ip remote_ip] [pppoe pppoe][quota_rst_freq
quota_rst_freq] [quota_time quota_time] [quota_traffic quota_traffic]
[en_bindmac en_bindmac] [bind_mac bind_mac] [vsftpd_status
vsftpd_status][smb smb] [radiusd_status radiusd_status] <ProfileName>
Command Description
[status status]
Enable the user account profile.
[status] - Enter Enable or Disable.
[pass password]
Enter a password for such profile to pass the authentication.
[password] - Enter characters (number, letter) for a password.
[sysuser sysuser]
Only the user profile with privilege level has the right to operate
the function of the router as the administrator of the router.
[sysuser] - Enter true (enable the function of System User) or
false.
[group group]
If true is selected for sysuser (System User), you have to specify
the privilege level (Guest_operator/User/Operator/Admin) for
such profile.
[group] - Enter Guest_operator / User / Operator / Admin.
[guest_op guest_op]
If Operator is set as privilege level, set this command as true;
otherwise, set false.
Set Guest Operator as priviledge level.
[guest_op] – Enter True or False.
[timeout timeout]
If the user is idle over the limitation of the timer, the network
connection will be stopped for such user.
[timeout] - By default, the Idle Timeout is set to 300 seconds.
Vigor2960 Series User’s Guide
594
[if pptpif]
Specify a LAN profile for DHCP server IP dispatching.
[pptpif] – Enter the name of the LAN profile.
[fixip fixip]
Assign the fixed IP address when user login via PPTP or L2TP.
[fixip] - Enter IP address.
[user_mnt_status
user_mnt_status]
Enable web portal login with such profile.
[user_mnt_status] - Enter Enable or Disable.
[user_enable_time_
quota
user_enable_time_q
uota]
Enable the time quota mechanism for this user account.
[user_enable_time_quota] - Enter Enable or Disable.
[user_set_time_quot
a
user_set_time_quot
a]
Set time quota for this account.
[user_set_time_quota] - Enter the time value.
[login_quota
login_quota]
Set the maximum number of online user for this account
[login_quota] - The range is from 1 to 255. -1 means not limit; 0
means No access.
[forced_logout
forced_logout
]
Force the earliest user to logout when exceeded the maximum
number of online user setting.
[forced_logout] – Enter Enable or Disable.
[pptp pptp]
Enable PPTP dial-in function for PPTP server.
[pptp] - Enter Enable or Disable.
[l2tp l2tp]
Enable L2TP dial-in function for L2TP server.
[l2tp] - Enter Enable or Disable.
[ssltunnel ssltunnel]
Enable SSL Tunnel for SSL server.
[ssltunnel] - Enter Enable or Disable.
[openvpn openvpn]
Enable / disable the function of OpenVPN.
[openvpn] – Enter Enable or Disable.
[ipsec ipsec]
Enable / disable the function of “XAuth/EAP”.
[ipsec] – Enter Enable or Disable.
[motp en_motp]
Enable mOTP function to make the authentication with mOTP. If
enabled, mOTP pin and secret shall be specified.
[en_motp] - Enter Enable or Disable.
[pin motp_pin]
Specify PIN code for authentication.
[motp_pin] - Enter the code for authentication (e.g, 1234).
[secret motp_secret]
Specify initial secret.
[motp_secret] - Use the 32 digit-secret number generated by
mOTP in the mobile phone (e.g., e759bb6f0e94c7ab4fe6).
[time_obj time_obj]
Specify time objects for the server.
[time_obj] - Enter the name of time object profile.
[sslproxy ssl_proxy]
It is available when sysuser (System User) is set with false. The
web proxy over SSL will be applied for VPN.
Vigor2960 Series User’s Guide
595
[ssl_proxy]- Specify one of the SSL proxy profile.
[ssl_vnc ssl_vnc]
It is available when sysuser (System User) is set with false.
[ssl_vnc] - Specify one of the SSL Application profiles (VNC) for
applying into this profile.
[ssl_rdp ssl_rdp]
It is available when sysuser (System User) is set with false.
[ssl_rdp] - Specify one of the SSL Application profiles (RDP) for
applying into this profile.
[remote_ip
remote_ip]
Specify Remote IP Address/Domain Name for remote dial-in
VPN client.
[remote_ip] - Enter IP address or domain name.
[pppoe pppoe]
Activate related PPPoE configuration for such profile.
[pppoe] - Enter Enable or Disable.
[quota_rst_freq
quota_rst_freq]
Specify the cycle time for PPPoE quota.
[quota_rst_freq] - Enter None / Everyday / Everymonth.
[quota_time
quota_time]
Set a time quota for PPPoE connection.
[quota_time] - Enter a time quota (-1~50000, -1 means “unlimit”)
for PPPoE connection.
[quota_traffic
quota_traffic]
Set the maximum traffic (MB) for such user profile for PPPoE
Connection.
[quota_traffic] - Enter a number.
[en_bindmac
en_bindmac]
Enable the function of PPPoE MAC Binding.
[en_bindmac] - Enter Enable or Disable.
[bind_mac
bind_mac]
Specify a MAC Address for PPPoE MAC Binding.
[bind_mac] - Enter a MAC address.
[vsftpd_status
vsftpd_status]
Allow This Account for FTP Server.
[vsftpd_status] - Enter Enable or Disable.
[smb smb]
Allow the remote user accessing into Internet via SAMBA server.
[smb] - Enter Enable or Disable.
[radiusd_status
radiusd_status]
Allow This Account for Radius Server
[radiusd_status] - Enter Enable or Disable.
<ProfileName>
Enter the name (e.g., user_carrie) of user account profile to be
modified.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a user account profile named with “user_david”.
Vigor2960>enable
Vigor2960# configure user
Vigor2960@config-user# users add shown_name enable status enable pass
num0123456 sysuser true group user user_david
Vigor2960@config-usr-user_david#
Vigor2960 Series User’s Guide
596
6
6
.
.
8
8
.
.
1
1
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
t
t
,
,
g
g
e
e
t
t
It is used for reviewing the detailed settings or modifying settings for the selected user
account profile (e.g., user_david).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-user-<ProfileNmae># set [status status] [pass password]
[sysuser sysuser] [group group] [guest_op guest_op] [timeout timeout]
[if pptpif] [fixip fixip] [user_mnt_status user_mnt_status]
[user_enable_time_quota user_enable_time_quota] [user_set_time_quota
user_set_time_quota] [login_quota login_quota] [forced_logout
forced_logout] [pptp pptp] [l2tp l2tp] [ssltunnel ssltunnel] [openvpn
openvpn] [ipsec ipsec] [motp en_motp] [pin motp_pin] [secret motp_secret]
[time_obj time_obj] [sslproxy ssl_proxy] [ssl_vnc ssl_vnc] [ssl_rdp
ssl_rdp] [remote_ip remote_ip] [pppoe pppoe] [quota_rst_freq
quota_rst_freq] [quota_time quota_time] [quota_traffic
quota_traffic][en_bindmac en_bindmac] [bind_mac bind_mac]
[vsftpd_status vsftpd_status] [smb smb] [radiusd_status radiusd_status]
Vigor2960@config-user-<ProfileName>#
users get
Command Description
<ProfileName>
Display the name of the profile.
get
Get the configuration of object profile.
set
Modify settings for the selected profile.
[status status]
Enable the user account profile.
[status] - Enter Enable or Disable.
[pass password]
Enter a password for such profile to pass the authentication.
[password] - Enter characters (number, letter) for a password.
[sysuser sysuser]
Only the user profile with privilege level has the right to operate
the function of the router as the administrator of the router.
[sysuser] - Enter true (enable the function of System User) or
false.
[group group]
If true is selected for sysuser (System User), you have to specify
the privilege level (Guest_operator/User/Operator/Admin) for
such profile.
[group] - Enter Guest_operator / User / Operator / Admin.
[guest_op guest_op]
If Operator is set as privilege level, set this command as true;
otherwise, set false.
Set Guest Operator as priviledge level.
[guest_op] – Enter True or False.
[timeout timeout]
If the user is idle over the limitation of the timer, the network
connection will be stopped for such user.
[timeout] - By default, the Idle Timeout is set to 300 seconds.
[if pptpif]
Specify a LAN profile for DHCP server IP dispatching.
[pptpif] – Enter the name of the LAN profile.
[fixip fixip]
Assign the fixed IP address when user login via PPTP or L2TP.
[fixip] - Enter IP address.
Vigor2960 Series User’s Guide
597
[user_mnt_status
user_mnt_status]
Enable web portal login with such profile.
[user_mnt_status] - Enter Enable or Disable.
[user_enable_time_
quota
user_enable_time_q
uota]
Enable the time quota mechanism for this user account.
[user_enable_time_quota] - Enter Enable or Disable.
[user_set_time_quot
a
user_set_time_quot
a]
Set time quota for this account.
[user_set_time_quota] - Enter the time value.
[login_quota
login_quota]
Set the maximum number of online user for this account
[login_quota] - The range is from 1 to 255. -1 means not limit; 0
means No access.
[forced_logout
forced_logout
]
Force the earliest user to logout when exceeded the maximum
number of online user setting.
[forced_logout] – Enter Enable or Disable.
[pptp pptp]
Enable PPTP dial-in function for PPTP server.
[pptp] - Enter Enable or Disable.
[l2tp l2tp]
Enable L2TP dial-in function for L2TP server.
[l2tp] - Enter Enable or Disable.
[ssltunnel ssltunnel]
Enable SSL Tunnel for SSL server.
[ssltunnel] - Enter Enable or Disable.
[openvpn openvpn]
Enable / disable the function of OpenVPN.
[openvpn] – Enter Enable or Disable.
[ipsec ipsec]
Enable / disable the function of “XAuth/EAP”.
[ipsec] – Enter Enable or Disable.
[motp en_motp]
Enable mOTP function to make the authentication with mOTP. If
enabled, mOTP pin and secret shall be specified.
[en_motp] - Enter Enable or Disable.
[pin motp_pin]
Specify PIN code for authentication.
[motp_pin] - Enter the code for authentication (e.g, 1234).
[secret motp_secret]
Specify initial secret.
[motp_secret] - Use the 32 digit-secret number generated by
mOTP in the mobile phone (e.g., e759bb6f0e94c7ab4fe6).
[time_obj time_obj]
Specify time objects for the server.
[time_obj] - Enter the name of time object profile.
[sslproxy ssl_proxy]
It is available when sysuser (System User) is set with false. The
web proxy over SSL will be applied for VPN.
[ssl_proxy]- Specify one of the SSL proxy profile.
[ssl_vnc ssl_vnc]
It is available when sysuser (System User) is set with false.
[ssl_vnc] - Specify one of the SSL Application profiles (VNC) for
applying into this profile.
Vigor2960 Series User’s Guide
598
[ssl_rdp ssl_rdp]
It is available when sysuser (System User) is set with false.
[ssl_rdp] - Specify one of the SSL Application profiles (RDP) for
applying into this profile.
[remote_ip
remote_ip]
Specify Remote IP Address/Domain Name for remote dial-in
VPN client.
[remote_ip] - Enter IP address or domain name.
[pppoe pppoe]
Activate related PPPoE configuration for such profile.
[pppoe] - Enter Enable or Disable.
[quota_rst_freq
quota_rst_freq]
Specify the cycle time for PPPoE quota.
[quota_rst_freq] - Enter None / Everyday / Everymonth.
[quota_time
quota_time]
Set a time quota for PPPoE connection.
[quota_time] - Enter a time quota (-1~50000, -1 means “unlimit”)
for PPPoE connection.
[quota_traffic
quota_traffic]
Set the maximum traffic (MB) for such user profile for PPPoE
Connection.
[quota_traffic] - Enter a number.
[en_bindmac
en_bindmac]
Enable the function of PPPoE MAC Binding.
[en_bindmac] - Enter Enable or Disable.
[bind_mac
bind_mac]
Specify a MAC Address for PPPoE MAC Binding.
[bind_mac] - Enter a MAC address.
[vsftpd_status
vsftpd_status]
Allow This Account for FTP Server.
[vsftpd_status] - Enter Enable or Disable.
[smb smb]
Allow the remote user accessing into Internet via SAMBA server.
[smb] - Enter Enable or Disable.
[radiusd_status
radiusd_status]
Allow This Account for Radius Server
[radiusd_status] - Enter Enable or Disable.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a user account profile named with “user_david”.
Vigor2960>enable
Vigor2960# configure user
Vigor2960@config-user# users user_david
Vigor2960@config-usr-user_david#get
shown_name : user_tets
status : Disable
pass : num0123456
sysuser : true
group : User
timeout : 300
if : lan1
fixip :
user_mnt_status : Disable
user_enable_time_quota : Disable
user_set_time_quota : 1440
Vigor2960 Series User’s Guide
599
login_quota : -1
forced_logout : Disable
for_remote_dailin :
pptp : Disable
l2tp : Disable
ssltunnel : Disable
openvpn : Disable
ipsec : Disable
motp : Disable
pin :
secret :
time_obj :
sslproxy :
ssl_vnc :
ssl_rdp :
remote_ip :
pppoe : Disable
quota_rst_freq : None
quota_time : -1
time_used : 0
quota_traffic : -1
traffic_used : 0
en_bindmac : Disable
bind_mac : 00:00:00:00:00:00
vsftpd_status : Disable
smb : Disable
radiusd_status : Disable
6
6
.
.
8
8
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
g
g
r
r
o
o
u
u
p
p
Users could use [group] command to add or delete the User Group Profile or use “show” to
get the profile list in the directory. Enter the profile name to open it and modify the profile
directly.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-user#group add <ProfileName>
Vigor2960@config-user#group delete <ProfileName>
Vigor2960@config-user#group show
Vigor2960@config-user#group show <ProfileName>
Vigor2960@config-user#group <ProfileName>
Command Description
group add
<ProfileName>
Add a new user group profile.
<ProfileName> - Enter the name of user group profile.
group delete
<ProfileName>
Remove a selected user group profile.
<ProfileName> - Enter the name (e.g., user_carrie) of user group
profile to be deleted.
group show
Display the status for all user group profiles.
group show
<ProfileName>
Display the status of selected user group profile.
<ProfileName> - Enter the name (e.g., user_carrie) of user group
Vigor2960 Series User’s Guide
600
profile.
group
<ProfileName>
Modify detailed settings for the selected profile.
<ProfileName> - Enter the name (e.g., user_carrie) of user group
profile to be modified.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a web category bject profile named with “user_grp_carrie”.
Vigor2960>enable
Vigor2960# configure user
Vigor2960@config-user#group add user_grp_carrie
Vigor2960@config-usr-group-user_grp_carrie#
6
6
.
.
8
8
.
.
2
2
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
g
g
r
r
o
o
u
u
p
p
a
a
d
d
d
d
?
?
To configure detailed settings for a user group profile, users could use [gropu add] to create a
new time object profile with detailed settings.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-user#group add [status status] <ProfileName>
Command Description
[status status]
Enable the user group profile.
[status] - Enter Enable or Disable.
<ProfileName>
Enter the name (e.g., user_grp_david) of user group profile to be
modified.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a user groupprofile named with “user_grp_david”.
Vigor2960>enable
Vigor2960# configure user
Vigor2960@config-user# group add status enable user_grp_david
Vigor2960@config-usr-group-user_grp_david#
6
6
.
.
8
8
.
.
2
2
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
t
t
,
,
g
g
e
e
t
t
,
,
m
m
e
e
m
m
b
b
e
e
r
r
It is used for reviewing the detailed settings or modifying settings for the selected user group
profile (e.g., user_grp_david).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-usr-group-<ProfileName>#set [status status]
Vigor2960@config-usr-group-<ProfileName>#member add <member>
Vigor2960@config-usr-group-<ProfileName>#member remove <member>
Vigor2960@config-usr-group-<ProfileName>get
Command Description
<ProfileName>
Display the name of the profile.
get
Get the configuration of user group profile.
set
Modify settings for the selected profile.
Vigor2960 Series User’s Guide
601
[status status]
Enable the user group profile.
[status] - Enter Enable or Disable.
member add
<member>
Add a user profile to such group profile.
[member] - Enter the name of the user profile.
member remove
<member>
Remove a user profile from such group.
[member] - Enter the name of the user profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
In this example, we create a user group profile named with “user_grp_carrie”.
Vigor2960>enable
Vigor2960# configure user
Vigor2960@config-user#
Vigor2960@config-user# group user_grp_carrie
Vigor2960@config-usr-group-user_grp_carrie# member add user_carrie
Vigor2960@config-usr-group-user_grp_carrie# get
status : Disable
member : user_carrie
Vigor2960@config-usr-group-user_grp_carrie#
Vigor2960 Series User’s Guide
602
6
6
.
.
9
9
A
A
p
p
p
p
l
l
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
To make applications configuration, you have to type “configure application” to
access into next phase.
Vigor2960>enable
Vigor2960# configure applications
Vigor2960@config-app#
.
There are several functions for application – DDNS, GVRP, HA, LDAP, OSPF, RIP, SIP
ALG, and UPnP.
Available sub-commands under Application include:
- DDNS (refer to 6.9.1)
- GVRP (refer to 6.9.2)
- LDAP (refer to 6.9.3)
- OSPF (refer to 6.9.4)
- RIP (refer to 6.9.5)
- SIP ALG (refer to 6.9.6)
- UPnP (refer to 6.9.7)
Note:
[XXX XXX] - [ ] means such command is optional. The former is command itself; the
latter is value/selection for such command.
<XXX XXX> - < > means such command is required. The former is command itself;
the latter is value/selection for such command.
6
6
.
.
9
9
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
D
D
D
D
N
N
S
S
Users could use [ddns] command to configure Dynamic DNS. Use “show” to get the profile
list in the directory, or select the profile, then use the [get] or [set] command to configure the
Dynamic DNS details information.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-apps-ddns# set [status status] [if if-name] [policy
if-policy] [provider provider] [stype server_type] [domain domain-name]
[login login-name] [pw password] [ip_source ip_source] [wildcard
wildcard] [backup_mx backup-mx] [mx mail-extender] [time_interval
time_interval] <ProfileName>
Vigor2960@config-apps-ddns# get <profile name>
Vigor2960@config-apps-ddns# show
Command Description
[status status]
Enable the DDNS profile.
[status] - Enter Enable or Disable.
[if if-name]
Speicfy the interface that such profile will apply to.
[if-name] - Specify WAN profile.
[policy if-policy]
Specify a routing policy applied to DDNS profile.
Vigor2960 Series User’s Guide
603
[if-policy] - Available settings include
selected_wan_first
selected_wan_only.
[provider provider]
Specify DDNS server provider.
[provider] - Available settings include:
User-Defined/DrayTek_Global/3322/afraid/changeip/dns4biz/dns
dynamic/dnsexit/dnsmax/dnsomatic/dtdns/dy-name-server/dynami
/dyndns/editdns/Google_Domains/he.net/huagai/namecheap/no-ip
/OpenDNS/ovh/selfhost/strato/thatip/twoddns/tzo/ubddns.org/vigo
rddns/zoneedit
[stype server_type]
Specify service type for such DDNS profile.
[server_type] - Dynamic / Static / Custom
[domain
domain-name]
Specify a domain name for such DDNS profile. It is available
when Custom is selected as service type.
[domain-name] - Enter the domain name.
[login login-name]
Specify the name for user to login.
[login-name]- Enter a name for user to login.
[pw password]
Specify a password for user to login.
[password] - Enter a password for user to login.
[ip_source
ip_source]
Specify the IP source for the DDNS profile.
[ip_source] - Available settings include:
my_wan_ip
my_internet_ip
[wildcard wildcard]
Enable or disable the function of wild card.
[wildcard] - Enter Enable or Disable.
[backup_mx
backup-mx]
Enable or disable the function of Backup MX.
[backup-mx] - Enter Enable or Disable.
[mx mail-extender]
Specify the mail extender.
[mail-extender] - Enter the IP or domain name of the mail server.
[time_interval
time_interval]
Set the time for the router to perform auto update for DDNS
service.
[time_interval] - Range from 1 ~ 43200. The unit is minute.
<ProfileName>
Specify a DNS profile (ddns1 to ddns10).
get <profile name>
Display current setting status of the selected profile.
<profile name> – Range from “ddns1” to “ddns0”.
show
Display current setting status for all of the DDNS profiles.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure applications
Vigor2960@config-app#ddns
Vigor2960@config-apps-ddns#
Vigor2960 Series User’s Guide
604
Vigor2960@config-apps-ddns# set status enable ddns1
set done
Vigor2960@config-apps-ddns# get ddns1
status : Disable
if : wan1
policy : selected_wan_first
provider : dyndns
stype : Dynamic
domain :
login :
pw :
ip_source : 0
wildcard : Disable
backup_mx : Disable
mx :
time_interval : 14400
status : 0
Vigor2960@config-apps-ddns#
6
6
.
.
9
9
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
G
G
V
V
R
R
P
P
Users could use [gvrp] command to define a method for changing the VLAN information
among device.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-app#gvrp set [status status] [interface interface]
[join_time join_time]
Vigor2960@config-app#gvrp get
Command Description
get
Get the configuration of GVRP.
set
Modify settings for the GVRP.
[status status]
Enable the function of GVRP.
[status] - Enter Enable or Disable.
[interface interface]
Speicfy the interface for sending GVRP packet.
[interface] - Specify LAN or WAN profile.
[join_time
join_time]
Set the time for the system to send GVRP packet to other device.
[join_time] - Any value (e.g., 20). The unit is “second”.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure applications
Vigor2960@config-app#
Vigor2960@config-app# gvrp set status enable
set done
Vigor2960@config-app# gvrp set interface lan_carrie
Vigor2960 Series User’s Guide
605
set done
Vigor2960@config-app# gvrp set join_time 20
set done
Vigor2960@config-app#
6
6
.
.
9
9
.
.
3
3
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
l
l
d
d
a
a
p
p
Users could use [ldap] command to configure LDAP profile.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-app#ldap add <ProfileName>
Vigor2960@config-app#ldap delete <ProfileName>
Vigor2960@config-app#ldap show
Vigor2960@config-app#ldap show <ProfileName>
Vigor2960@config-app#ldap <ProfileName>
Command Description
ldap add
<ProfileName>
Add a new profile.
<ProfileName> - Enter the name of LDAP profile.
ldap delete
<ProfileName>
Remove a selected profile.
<ProfileName> - Enter the name (e.g., ldap_carrie) of LDAP
profile to be deleted.
ldap show
Display the status for all profiles.
ldap show
<ProfileName>
Display the status of selected profile.
<ProfileName> - Enter the name (e.g., ldap_carrie) of LDAP
profile.
ldap <ProfileName>
Modify detailed settings for the selected profile.
<ProfileName> - Enter the name (e.g., ldap_carrie) of LDAP
profile to be modified.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure applications
Vigor2960@config-app#
Vigor2960@config-app# ldap add ldap_carrie
Vigor2960@config-app-ldap-ldap_carrie#
6
6
.
.
9
9
.
.
3
3
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
l
l
d
d
a
a
p
p
a
a
d
d
d
d
?
?
To configure detailed settings for an LDAP profile, users could use [ldap add] to create a
new profile with detailed settings.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-app# ldap add [status status] [status status]
[bind_type bind_type] [server_ip server_ip][port port] [cid cid]
Vigor2960 Series User’s Guide
606
[base_dn base_dn] [group_dn group_dn] [regular_dn regulardn]
[regular_pwd regular_pwd] [usage_time usage_time] <ProfileName>
Command Description
[status status]
The first [status status] command is used to enable/disable LDAP
function.
[status]- Enter Enable or Disable.
[status status]
The second [status status] command is used to enable/disable
LDAP with TLS.
[status]- Enter Enable or Disable.
[bind_type
bind_type]
Specify the Bind Type.
[bind_type] – Available settings include:
Simple_Mode
Anonymous
Regular_Mode
[server_ip
server_ip]
Specify the IP address of LDAP server.
[server_ip] – Enter the IPv4 address.
[port port]
Specify a port number for LDAP server.
[port] – Enter a port number.
[cid cid]
Define common name identifier.
[cid]- Enter a name. The common name identifier for most LDAP
server is “cn”.
[base_dn base_dn]
Define base distinguished name.
[base_dn] – Enter a name.
[group_dn
group_dn]
Define group distinguished name.
[group_dn] – Enter a name.
[regular_dn
regulardn]
Define regular distinguished name.
[regular_dn] – Enter this setting if Regular Mode is selected as
Bind Type.
[regular_pwd
regular_pwd]
Define regular password.
[regular_pwd] – Enter a string as password if Regular Mode is
selected as Bind Type.
[usage_time
usage_time]
Define a value as default usage time.
[usage_time] – Enter a time value. The unit is minute.
<ProfileName>
Set a new name for LDAP profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure applications
Vigor2960@config-app#ldap add status enable bind_type simple_mode
port 5601 ladp_carrie
Vigor2960@config-app-ldap-ladp_carrie#
6
6
.
.
9
9
.
.
3
3
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
t
t
,
,
g
g
e
e
t
t
Vigor2960 Series User’s Guide
607
It is used for reviewing the detailed settings or modifying settings for the selected LDAP
profile (e.g., ldap_david).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-app-ldap-<ProfileName>#set [status status] [status
status] [bind_type bind_type] [server_ip server_ip][port port] [cid cid]
[base_dn base_dn] [group_dn group_dn] [regular_dn regulardn]
[regular_pwd regular_pwd] [usage_time usage_time]
Vigor2960@config-app-ldap#get
Command Description
<ProfileName>
Display the name of the profile.
get
Get the configuration of profile.
set
Modify settings for the profile.
[status status]
The first [status status] command is used to enable/disable LDAP
function.
[status]- Enter Enable or Disable.
[status status]
The second [status status] command is used to enable/disable
LDAP with TLS.
[status]- Enter Enable or Disable.
[bind_type
bind_type]
Specify the Bind Type.
[bind_type] - Available settings include:
Simple_Mode
Anonymous
Regular_Mode
[server_ip
server_ip]
Specify the IP address of LDAP server.
[server_ip] - Enter the IPv4 address.
[port port]
Specify a port number for LDAP server.
[port] - Enter a port number.
[cid cid]
Define common name identifier.
[cid]- Enter a name. The common name identifier for most LDAP
server is “cn”.
[base_dn base_dn]
Define base distinguished name.
[base_dn] - Enter a name.
[group_dn
group_dn]
Define group distinguished name.
[group_dn] - Enter a name.
[regular_dn
regulardn]
Define regular distinguished name.
[regular_dn] - Enter this setting if Regular Mode is selected as
Bind Type.
[regular_pwd
regular_pwd]
Define regular password.
[regular_pwd] - Enter a string as password if Regular Mode is
selected as Bind Type.
[usage_time
usage_time]
Define a value as default usage time.
[usage_time] - Enter a time value. The unit is minute.
Vigor2960 Series User’s Guide
608
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure applications
Vigor2960@config-app#ldap
Vigor2960@config-app-ldap#get
status : Disable
status : disable
bind_type : 0
server_ip :
port : 389
cid : cn
base_dn :
group_dn :
regular_dn :
regular_pwd :
usage_time : -1
Vigor2960@config-app-ldap#ldap ldap_carrie
Vigor2960@config-app-ldap-ldap_carrie# set status enable bind_type
Simple_Mode
set done
Vigor2960@config-app-ldap-ldap_carrie# get
status : Enable
status : Enable
bind_type : Simple_Mode
server_ip : 0.0.0.0
port : 389
cid : cn
base_dn :
group_dn :
regular_dn :
regular_pwd :
usage_time : -1
6
6
.
.
9
9
.
.
4
4
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
o
o
s
s
p
p
f
f
Users could use [ospf] command to configure OSPF setting.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-app-ospf#pf add <profile> <area>
Vigor2960@config-app-ospf#set
[status status] [router_id router_id] [pf
profile]
Vigor2960@config-app-ospf#get
Command Description
add
Add a profile to support OSPF.
get
Get the configuration of profile.
set
Modify settings for the profile.
Vigor2960 Series User’s Guide
609
<profile>
Create a new profile.
<profile> - Enter a name of WAN/LAN profile.
<area>
<area> - An AS will be divided into several areas. Each area must
be assigned with a dedicated number.
[status status]
Enable the OSPF function.
[status] - Enter Enable or Disable.
[router_id
router_id]
Specify an IP address for Vigor router which will be recognized in
an autonomous system.
[router_id] - Enter an IP address (e.g., 192.168.1.56).
[pf profile]
[profile] - Enter the name of LAN/WAN profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure applications
Vigor2960@config-app#ospf
Vigor2960@config-app-ospf#pf add wan2 11
Vigor2960@config-app-ospf#get
status : Disable
router_id :
pf : wan2 11
6
6
.
.
9
9
.
.
5
5
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
r
r
i
i
p
p
Users could use [rip] command to configure RIP setting.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-app-rip#pf add <profile>
Vigor2960@config-app-rip#set [status status] [pf profile]
Vigor2960@config-app-rip#get
Command Description
pf add
Add a profile to support add RIP.
get
Get the configuration for RIP.
set
Modify settings for RIP.
<profile>
<profile> - Enter a name for WAN/LAN profile to support RIP
function.
[status status]
Enable the RIP function.
[status] - Enter Enable or Disable.
[pf profile]
[profile] - Enter the name of LAN/WAN profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure applications
Vigor2960@config-app#rip
Vigor2960@config-app-rip#pf add wan1
Vigor2960 Series User’s Guide
610
Vigor2960@config-app-rip#get
status : Disable
pf : wan1
Vigor2960@config-app-rip#set status enable pf wan1
6
6
.
.
9
9
.
.
6
6
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
S
S
I
I
P
P
A
A
L
L
G
G
Users could use [sipalg] command to configure SIP ALG setting.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-app-sipalg#set [status status] [sip_port sip_port]
Vigor2960@config-app-sipalg#get
Command Description
get
Get the configuration for SIP ALG.
set
Modify settings for for SIP ALG.
[status status]
Enable the function of UPnP.
[status] - Enter Enable or Disable.
[sip_port sip_port]
Set a port number for SIP ALG.
[sip_port] - Enter a value (ranging from 1 to 65535). Default value
is 5060.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure applications
Vigor2960@config-app#sipalg
Vigor2960@config-app-sipalg#get
status : Disable
sip_port : 5060
6
6
.
.
9
9
.
.
7
7
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
U
U
P
P
n
n
P
P
Users could use [upnp] command to configure UPnP.User could use the [get] or [set]
command to configure the UPnP details information.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-app-upnp# set [status status] [download download]
[upload upload] [external external] [inernal internal] [max_session
max_session]
Vigor2960@config-app-upnp#get
Command Description
get
Get the configuration for UPnP.
set
Modify settings for for UPnP.
[status status]
Enable the function of UPnP.
[status] - Enter Enable or Disable.
[download
Enter the maximum sustained WAN download speed in
Vigor2960 Series User’s Guide
611
download]
kilobits/second.
[download] - Enter the speed rate (in kpbs).
[upload upload]
Enter the maximum sustained WAN upload speed in
kilobits/second.
[download] - Enter the speed rate (in kpbs).
[external external]
Select a WAN profile for UPnP protocol.
[external] - Enter the name of the WAN profile.
[inernal internal]
Select a LAN profile for UPnP protocol.
[internal] - Enter the name of LAN profile.
[max_session
max_session]
Determine the maximum session number for UPnP function.
[max_session] - Enter the number for maximum session (20 –
500).
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure applications
Vigor2960@config-app#upnp
Vigor2960@config-app-upnp#set status enable download 1000 upload 100
external wan1 internal lan1 max_session 500
Set done
Vigor2960@config-app-upnp#get
status : Enable
download : 1000
upload : 100
external : wan1
internal : lan1
max_session : 500
6
6
.
.
1
1
0
0
V
V
P
P
N
N
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
VPN (Virtual Private Network) is the extension of a private network that encompasses links
across shared or public networks like the Internet. In short, by VPN technology, user can
send data between two computers across a shared or public network in a manner that
emulates the properties of a point-to-point private link.
Vigor2960 provides three functions in VPN – LAN-to-LAN, remote dial-in and VPN
trunk.Users could use the commands below to set up the details.
To make VPN configuration, you have to type “
configure vpn” to access into next phase.
Vigor2960>enable
Vigor2960# configure vpn
Vigor2960@config-vpn#
There are several functions for VPN configuration – LAN to LAN, Remote Dial In, Trunk
and Virtual System.
- lan2lan (refer to 6.10.1)
- remotedialin (refer to 6.10.2)
- trunk (refer to 6.10.3)
Vigor2960 Series User’s Guide
612
Note:
[XXX XXX] - [ ] means such command is optional. The former is command itself; the
latter is value/selection for such command.
<XXX XXX> - < > means such command is required. The former is command itself;
the latter is value/selection for such command.
6
6
.
.
1
1
0
0
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
l
l
a
a
n
n
2
2
l
l
a
a
n
n
Users could use [lan2lan] command to configure LAN to LAN, then use [ipsecpolicy],
[ipsecsetup], [pptpdialin], [pptpdialout] commands to set the details.
Vigor2960>enable
Vigor2960# configure vpn
Vigor2960@config-vpn#
Vigor2960@config-vpn# lan2lan
Vigor2960@config-vpn-l2l#
6
6
.
.
1
1
0
0
.
.
1
1
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
i
i
p
p
s
s
e
e
c
c
p
p
o
o
l
l
i
i
c
c
y
y
Users could use [ipsecpolicy] command to add or delete the IPSec Policy profile or use
“show” to get the profile list in the directory. Enter the profile name to open it and modify
the profile directly.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-vpn-l2l# ipsecpolicy add <SectionName>
Vigor2960@config-vpn-l2l# ipsecpolicy delete <SectionName>
Vigor2960@config-vpn-l2l# ipsecpolicy show
Vigor2960@config-vpn-l2l# ipsecpolicy show <SectionName>
Vigor2960@config-vpn-l2l# ipsecpolicy <SectionName>
Command Description
ipsecpolicy add
<SectionName>
Add a new LAN to LAN profile.
<SectionName>- Enter the name of LAN to LAN profile.
ipsecpolicy delete
<SectionName>
Remove a selected LAN to LAN profile.
<SectionName> - Enter the name (e.g., l2l_carrie) of LAN to
LAN profile to be deleted.
ipsecpolicy show
Display the status for all LAN to LAN profiles.
ipsecpolicy show
<SectionName>
Display the status of selected LAN to LAN profile.
<SectionName>> - Enter the name (e.g., l2l_carrie) of LAN to
LAN profile.
ipsecpolicy
<SectionName>
Modify detailed settings for the selected profile.
<SectionName> - Enter the name (e.g., l2l_carrie) of LAN to
LAN profile to be modified.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure vpn
Vigor2960@config-vpn#
Vigor2960@config-vpn# lan2lan
Vigor2960 Series User’s Guide
613
Vigor2960@config-vpn-l2l# ipsecpolicy add l2l_carrie
Vigor2960@config-vpn-l2l# ipsecpolicy l2l_carrie
Vigor2960@config-vpn-l2l-ipsecpolicy-l2l_carrie#
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
i
i
p
p
s
s
e
e
c
c
p
p
o
o
l
l
i
i
c
c
y
y
a
a
d
d
d
d
?
?
To configure detailed settings for a LAN to LAN profile, users could use [ipsecpolicy add]
to create a new profile with detailed settings.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-vpn-l2l# ipsecpolicy add [status status] [always_on
always_on] [always_on_agent always_on_agent] [always_on_bk
always_on_bk] [for_remote_dialin for_remote_dialin]
[lefthost_if_alias_ip lefthost_if_alias_ip] [lefthost_if_alias
lefthost_if_alias] [lefthost_if lefthost_if] [lefthost_if_bk
lefthost_if_bk] [localsubnet localsubnet][localnext localnext]
[remotehost remotehost] [remotesubnet remotesubnet] [more_remotesubnet
more_remotesubnet] [ike_mode ike_mode] [aggrmode aggrmode] [auth auth]
[leftpem leftpem] [localid_type localid] [peerid_type remoteid]
[peerid_value remoteid] [peerid_value_cert cert] [psk psk] [leftid
localid] [rightid remoteid] [secret_type secret_type]
[phase1keylifetime phase1keylifetime] [phase2keylifetime
phase2keylifetime] [pfs pfs] [dpd dpd] [dpddelay dpddelay] [dpdtimeout
dpdtimeout] [ping ping] [pinghost pinghost] [natmode natmode] [srcip
srcip] [enable_netmap enable_netmap] [leftclient_nat leftclient_nat]
[enable_def_route enable_def_route] [nbns_pass nbns_pass] [mcast_pass
mcast_pass] [rip_pass rip_pass] [pkt_trigger pkt_trigger] [forceencaps
forceencaps] [gre gre] [localgreip localgreip] [remotegreip remotegreip]
[autogrekey autogrekey] [grekeyin grekeyin] [grekeyout grekeyout]
[ikephase1proposal ikephase1proposal] [ikephase1authproposal
ikephase1authproposal] [ikephase2proposal ikephase2proposal]
[ikephase2authproposalikephase2authproposal] [acceptall acceptall]
<SectionName>
Command Description
add
Create a new LAN to LAN profile based on IPsec policy.
[status status]
Enable the LAN to LAN profile.
[status] - Enter Enable or Disable.
[always_on
always_on]
Enable the function of Always On. If it is disabled,
[always_on_bk] will be invalid.
[status] - Enter Enable or Disable.
[always_on_agent
always_on_agent]
Enable the function of Always On.
[status] - Enter Enable or Disable.
[always_on_bk
always_on_bk]
When the select WAN profile is down, such LAN to LAN profile
be used for dialing-out.
[status] – Available settings include:
Empty
Any WAN profile (e.g., wan1, wan_carrie, wan_david)
[for_remote_dialin
for_remote_dialin]
Enable / disable to set remote dial-in for such profile.
[status] - Enter Enable or Disable.
Vigor2960 Series User’s Guide
614
[lefthost_if_alias_ip
lefthost_if_alias_ip]
Specify one WAN Alias IP.
[lefthost_if_alias_ip] – Enter the IP address (configured as WAN
Alias IP).
[lefthost_if_alias
lefthost_if_alias]
Enable / disable the function of WAN Alias IP.
[lefthost_if_alias] – Enter Enable or Disable.
[localhost
lefthost_if]
Specify the WAN interface for dialing out.
[lefthost] – Enter the name of WAN profile.
[localhost
lefthost_if_bk]
Specify WAN interface as backup WAN (failover WAN).
[lefthost_if_bk]- Enter WAN interface profile.
[localsubnet
localsubnet]
Specify subnet for local host.
[localsubnet] –Enter the subnet with mask (e.g., 192.168.1.0/24).
[localnext localnext]
Specify the gateway for WAN interface.
[localnext] – Enter the IP address.
[remotehost
remotehost]
Specify an IP address for remote host.
[remotehost] – Enter the IP address.
[remotesubnet
remotesubnet]
Specify the subnet mask for the remote host.
[remotesubnet] –Enter the subnet with mask (e.g.,
192.168.1.0/24).
[more_remotesubne
t
more_remotesubnet
]
Add more subnets for remotel host.
[localsubnet] –Enter the subnet with mask (e.g., 192.168.1.0/24).
[ike_mode
ike_mode]
Specify IKE Phase 1 protocol.
[ike_mode] – Available settings are:
IKEv1
IKEv2
[aggrmode
aggrmode]
Specify the aggressive mode for IKEv1 Phase 1.
[aggrmode] – Available settings are:
Main_Mode
Aggressive_Mode
[auth auth]
Specify the authentication type for Pre-Shared Key or RSA
Signature.
[auth]- Available settings are:
PSK
RSA
[leftpem leftpem]
Specify local certificate. It should be specified when RSA is
selected as “auth” type.
[leftpem] – Enter the name of local certificate.
[localid_type
localid]
Specify local peer ID.
[localid] – Available settings are:
SubjectName
SubjectAlternativeName
Vigor2960 Series User’s Guide
615
[peerid_type
remoteid]
Specify peer ID type for remote end by entering the required
string.
[remoteid] – Available settings are:
AcceptAny
SubjectAlterName:IP
SubjectAlterName:DomainName
SubjectAlterName:Email
Certificate
[peerid_value
remoteid]
Set the value for the remote client, if “2”, “3” or “4” is set as peer
ID type.
[remoteid] – Enter the IP address, Domain name or Email of
remote client (based on the ID type selected for peer side).
[peerid_value_cert
cert]
Set the value for the remote client, if “5” is set as peer ID type.
[cert] – Enter the name of certificate.
[psk psk]
Specify a key for IKE authentication if PSK is selected as Auth
Type.
[psk] – Enter the key.
[leftid localid]
Set a string as local ID if “PSK” is set as authentication type and
“Aggressive_Mode” is set as Aggressive mode.
[localid] – Enter a string.
[rightid remoteid]
Set a string as remote ID if “PSK” is set as authentication type and
“Aggressive_Mode” is set as Aggressive mode.
[remoteid] – Enter a string.
[secret_type
secret_type]
Specify the security protocol.
[secret_type] – Available settings are:
ESP
AH
[phase1keylifetime
phase1keylifetime]
Specify the life time for IKE Phase 1 key.
[phase1keylifetime] – Enter a number (from 3600 to 86400 sec.).
[phase2keylifetime
phase2keylifetime]
Specify the life time for IKE Phase 2 key.
[phase2keylifetime] –Enter a number (from 3600 to 86400 sec.).
[pfs pfs]
Enable / disable the perfect forward secrecy status
[pfs] – Enter Enable or Disable.
[dpd dpd]
Enable / disable the dead peer detection (DPD) status.
[dpd] – Enter Enable or Disable.
[dpddelay
dpddelay]
Set keep-alive timer for the DPD delay.
[dpddelay] – Enter a number. Default is 30 (sec.).
[dpdtimeout
dpdtimeout]
Specify the timeout timer for DPD.
[dpdtimeout] - Enter a number. Default is 120 (sec.).
[ping ping]
Enable / disable the function of Ping to Keeep Alive.
[ping] – Enter Enable or Disable.
Vigor2960 Series User’s Guide
616
[pinghost pinghost]
Specify the IP address for the system to PING it for keeping alive.
[pinghost] – Enter the IPv4 address.
[natmode natmode]
Specify NAT mode for LAN subnet to remote network.
[natmode] – Available settings are:
Route
NAT
[srcip srcip]
Specify the source IP address for the router to use when
transmitting a packet to the remote IPsec gatway.
[srcip] – Available settings include:
Enter “auto_detect_srcip”.
Enter the name of a LAN profile.
[enable_netmap
enable_netmap]
Enable NAT mapping function.
[enable_netmap] – Enter Enable or Disable.
[leftclient_nat
leftclient_nat]
Specify an IP address with subnet mask of the network that all
traffic will be translated into.
[leftclient_nat] – Enter the subnet with mask (e.g.,
192.168.1.0/24).
[enable_def_route
enable_def_route]
Change the default route to such tunnel (LAN to LAN profile).
[enable_def_route] - Enter Enable or Disable.
[nbns_pass
nbns_pass]
Enable / disable the function of passing NetBios Naming Packet.
[nbns_pass] - Enter Enable or Disable.
[mcast_pass
mcast_pass]
Enable / disable the function of Multicast via VPN.
[mcast_pass] - Enter Enable or Disable.
[rip_pass rip_pass]
Enable / disable the function of passing RIP packet via VPN.
[rip_pass] - Enter Enable or Disable.
[pkt_trigger
pkt_trigger]
Enable / disable the function of Packet-Triggered.
[pkt_trigger] - Enter Enable or Disable
[forceencaps
forceencaps]
Enable / disable the function of Force UDP Encapsulation with
4500 port.
[forceencaps] - Enter Enable or Disable.
[gre gre]
Enable / disable the GRE function.
[gre] - Enter Enable or Disable.
[localgreip
localgreip]
Specify local GRE IP address.
[localgreip] – Enter the IPv4 address.
[remotegreip
remotegreip]
Specify remote GRE IP address.
[remotegreip] – Enter the IPv4 address.
[autogrekey
autogrekey]
Enable / disable the function of generating GRE key
automatically.
[autogrekey] - Enter Enable or Disable.
[grekeyin grekeyin]
Specify the GRE in key.
[grekeyin] – Enter the key.
Vigor2960 Series User’s Guide
617
[grekeyout
grekeyout]
Specify the GRE out key.
[grekeyout] – Enter the key.
[ikephase1proposal
ikephase1proposal]
Specify the IKE phase1 proposal.
[ikephase1proposal] – Availale settings are:
DES_G1
DES_G2
DES_G5
DES_G14
3DES_G1
3DES_G2
3DES_G5
3DES_G14
AES128_G1
AES128_G2
AES128_G5
AES128_G14
AES192_G1
AES192_G2
AES192_G5
AES192_G14
AES256_G1
AES256_G2
AES256_G5
AES256_G14
[ikephase1authprop
osal
ikephase1authprop
osal]
Specify the authentication mofe for IKE phase1.
[ikephase1authproposal] – Available settings are:
ALL
MD5
SHA1
SHA2_256
[ikephase2proposal
ikephase2proposal]
Specify the proposal mofe for IKE phase2.
[ikephase2proposal] – Available settings are:
DES_without_Auth
DES_with_auth
3DES_without_auth
3DES_with_auth
AES128_without_auth
AES128_with_auth
AES192_without_auth
AES192_with_auth
AES256_without_auth
AES256_with_auth
Vigor2960 Series User’s Guide
618
[ikephase2authprop
osal
ikephase2authprop
osal]
Specify the authentication mofe for IKE phase2.
[ikephase2authproposal] – Available settings are:
ALL
MD5
SHA1
SHA2_256
[acceptall acceptall]
Specify the proposal for dial-in.
[acceptall]- Available settings are:
acceptall
acceptabove
<SectionName>
Specify a name for LAN to LAN profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure vpn
Vigor2960@config-vpn#
Vigor2960@config-vpn# lan2lan
Vigor2960@config-vpn-l2l# ipsecpolicy add status enable always_on
enable vpn_l2l_carrie
Vigor2960@config-vpn-l2l#
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
t
t
,
,
g
g
e
e
t
t
,
,
c
c
o
o
n
n
n
n
e
e
c
c
t
t
,
,
d
d
i
i
s
s
c
c
o
o
n
n
n
n
e
e
c
c
t
t
It is used for reviewing the detailed settings or modifying settings for the selected LAN to
LAN profile (e.g., l2l_carrie).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-vpn-l2l-ipsecpolicy-<SectionName>#connect
Vigor2960@config-vpn-l2l-ipsecpolicy-<SectionName>#disconnect
Vigor2960@config-vpn-l2l-ipsecpolicy-<SectionName>#get
Vigor2960@config-vpn-l2l-ipsecpolicy-<SectionName>#set [status status]
[always_on always_on] [always_on_agent always_on_agent] [always_on_bk
always_on_bk] [for_remote_dialin for_remote_dialin]
[lefthost_if_alias_ip lefthost_if_alias_ip] [lefthost_if_alias
lefthost_if_alias] [lefthost_if lefthost_if] [lefthost_if_bk
lefthost_if_bk] [localsubnet localsubnet][localnext localnext]
[remotehost remotehost] [remotesubnet remotesubnet] [more_remotesubnet
more_remotesubnet] [ike_mode ike_mode] [aggrmode aggrmode] [auth auth]
[leftpem leftpem] [localid_type localid] [peerid_type remoteid]
[peerid_value remoteid] [peerid_value_cert cert] [psk psk] [leftid
localid] [rightid remoteid] [secret_type secret_type]
[phase1keylifetime phase1keylifetime] [phase2keylifetime
phase2keylifetime] [pfs pfs] [dpd dpd] [dpddelay dpddelay] [dpdtimeout
dpdtimeout] [ping ping] [pinghost pinghost] [natmode natmode] [srcip
srcip] [enable_netmap enable_netmap] [leftclient_nat leftclient_nat]
[enable_def_route enable_def_route] [nbns_pass nbns_pass] [mcast_pass
mcast_pass] [rip_pass rip_pass] [pkt_trigger pkt_trigger] [forceencaps
forceencaps] [gre gre] [localgreip localgreip] [remotegreip remotegreip]
[autogrekey autogrekey] [grekeyin grekeyin] [grekeyout grekeyout]
[ikephase1proposal ikephase1proposal] [ikephase1authproposal
ikephase1authproposal] [ikephase2proposal ikephase2proposal]
[ikephase2authproposalikephase2authproposal] [acceptall acceptall]
Vigor2960 Series User’s Guide
619
Command Description
[status status]
Enable the LAN to LAN profile.
[status] - Enter Enable or Disable.
[always_on
always_on]
Enable the function of Always On. If it is disabled,
[always_on_bk] will be invalid.
[status] - Enter Enable or Disable.
[always_on_agent
always_on_agent]
Enable the function of Always On.
[status] - Enter Enable or Disable.
[always_on_bk
always_on_bk]
When the select WAN profile is down, such LAN to LAN profile
be used for dialing-out.
[status] – Available settings include:
Empty
Any WAN profile (e.g., wan1, wan_carrie, wan_david)
[for_remote_dialin
for_remote_dialin]
Enable / disable to set remote dial-in for such profile.
[status] - Enter Enable or Disable.
[lefthost_if_alias_ip
lefthost_if_alias_ip]
Specify one WAN Alias IP.
[lefthost_if_alias_ip] – Enter the IP address (configured as WAN
Alias IP).
[lefthost_if_alias
lefthost_if_alias]
Enable / disable the function of WAN Alias IP.
[lefthost_if_alias] – Enter Enable or Disable.
[lefthost_if
lefthost_if]
Specify the WAN interface for dialing out.
[lefthost] – Enter the name of WAN profile.
[lefthost_if_bk
lefthost_if_bk]
Specify WAN interface as backup WAN (failover WAN).
[lefthost_if_bk]- Enter WAN interface profile.
[localsubnet
localsubnet]
Specify subnet for local host.
[localsubnet] –Enter the subnet with mask (e.g., 192.168.1.0/24).
[localnext localnext]
Specify the gateway for WAN interface.
[localnext] – Enter the IP address.
[remotehost
remotehost]
Specify an IP address for remote host.
[remotehost] – Enter the IP address.
[remotesubnet
remotesubnet]
Specify the subnet mask for the remote host.
[remotesubnet] –Enter the subnet with mask (e.g.,
192.168.1.0/24).
[more_remotesubne
t
more_remotesubnet
]
Add more subnets for remotel host.
[localsubnet] –Enter the subnet with mask (e.g., 192.168.1.0/24).
[ike_mode
ike_mode]
Specify IKE Phase 1 protocol.
[ike_mode] – Available settings are:
IKEv1
Vigor2960 Series User’s Guide
620
IKEv2
[aggrmode
aggrmode]
Specify the aggressive mode for IKEv1 Phase 1.
[aggrmode] – Available settings are:
Main_Mode
Aggressive_Mode
[auth auth]
Specify the authentication type for Pre-Shared Key or RSA
Signature.
[auth]- Available settings are:
PSK
RSA
[leftpem leftpem]
Specify local certificate. It should be specified when RSA is
selected as “auth” type.
[leftpem] – Enter the name of local certificate.
[localid_type
localid]
Specify local peer ID.
[localid] – Available settings are:
SubjectName
SubjectAlternativeName
[peerid_type
remoteid]
Specify peer ID type for remote end by entering the required
string.
[remoteid] – Available settings are:
AcceptAny
SubjectAlterName:IP
SubjectAlterName:DomainName
SubjectAlterName:Email
Certificate
[peerid_value
remoteid]
Set the value for the remote client, if “2”, “3” or “4” is set as peer
ID type.
[remoteid] – Enter the IP address, Domain name or Email of
remote client (based on the ID type selected for peer side).
[peerid_value_cert
cert]
Set the value for the remote client, if “5” is set as peer ID type.
[cert] – Enter the name of certificate.
[psk psk]
Specify a key for IKE authentication if PSK is selected as Auth
Type.
[psk] – Enter the key.
[leftid localid]
Set a string as local ID if “PSK” is set as authentication type and
“Aggressive_Mode” is set as Aggressive mode.
[localid] – Enter a string.
[rightid remoteid]
Set a string as remote ID if “PSK” is set as authentication type and
“Aggressive_Mode” is set as Aggressive mode.
[remoteid] – Enter a string.
[secret_type
secret_type]
Specify the security protocol.
[secret_type] – Available settings are:
Vigor2960 Series User’s Guide
621
ESP
AH
[phase1keylifetime
phase1keylifetime]
Specify the life time for IKE Phase 1 key.
[phase1keylifetime] – Enter a number (from 3600 to 86400 sec.).
[phase2keylifetime
phase2keylifetime]
Specify the life time for IKE Phase 2 key.
[phase2keylifetime] –Enter a number (from 3600 to 86400 sec.).
[pfs pfs]
Enable / disable the perfect forward secrecy status
[pfs] – Enter Enable or Disable.
[dpd dpd]
Enable / disable the dead peer detection (DPD) status.
[dpd] – Enter Enable or Disable.
[dpddelay
dpddelay]
Set keep-alive timer for the DPD delay.
[dpddelay] – Enter a number. Default is 30 (sec.).
[dpdtimeout
dpdtimeout]
Specify the timeout timer for DPD.
[dpdtimeout] - Enter a number. Default is 120 (sec.).
[ping ping]
Enable / disable the function of Ping to Keeep Alive.
[ping] – Enter Enable or Disable.
[pinghost pinghost]
Specify the IP address for the system to PING it for keeping alive.
[pinghost] – Enter the IPv4 address.
[natmode natmode]
Specify NAT mode for LAN subnet to remote network.
[natmode] – Available settings are:
Route
NAT
[srcip srcip]
Specify the source IP address for the router to use when
transmitting a packet to the remote IPsec gatway.
[srcip] – Available settings include:
Enter “auto_detect_srcip”.
Enter the name of a LAN profile.
[enable_netmap
enable_netmap]
Enable NAT mapping function.
[enable_netmap] – Enter Enable or Disable.
[leftclient_nat
leftclient_nat]
Specify an IP address with subnet mask of the network that all
traffic will be translated into.
[leftclient_nat] – Enter the subnet with mask (e.g.,
192.168.1.0/24).
[enable_def_route
enable_def_route]
Change the default route to such tunnel (LAN to LAN profile).
[enable_def_route] - Enter Enable or Disable.
[nbns_pass
nbns_pass]
Enable / disable the function of passing NetBios Naming Packet.
[nbns_pass] - Enter Enable or Disable.
[mcast_pass
mcast_pass]
Enable / disable the function of Multicast via VPN.
[mcast_pass] - Enter Enable or Disable.
[rip_pass rip_pass]
Enable / disable the function of passing RIP packet via VPN.
Vigor2960 Series User’s Guide
622
[rip_pass] - Enter Enable or Disable.
[pkt_trigger
pkt_trigger]
Enable / disable the function of Packet-Triggered.
[pkt_trigger] - Enter Enable or Disable
[forceencaps
forceencaps]
Enable / disable the function of Force UDP Encapsulation with
4500 port.
[forceencaps] - Enter Enable or Disable.
[gre gre]
Enable / disable the GRE function.
[gre] - Enter Enable or Disable.
[localgreip
localgreip]
Specify local GRE IP address.
[localgreip] – Enter the IPv4 address.
[remotegreip
remotegreip]
Specify remote GRE IP address.
[remotegreip] – Enter the IPv4 address.
[autogrekey
autogrekey]
Enable / disable the function of generating GRE key
automatically.
[autogrekey] - Enter Enable or Disable.
[grekeyin grekeyin]
Specify the GRE in key.
[grekeyin] – Enter the key.
[grekeyout
grekeyout]
Specify the GRE out key.
[grekeyout] – Enter the key.
[ikephase1proposal
ikephase1proposal]
Specify the IKE phase1 proposal.
[ikephase1proposal] – Availale settings are:
DES_G1
DES_G2
DES_G5
DES_G14
3DES_G1
3DES_G2
3DES_G5
3DES_G14
AES128_G1
AES128_G2
AES128_G5
AES128_G14
AES192_G1
AES192_G2
AES192_G5
AES192_G14
AES256_G1
AES256_G2
AES256_G5
AES256_G14
Vigor2960 Series User’s Guide
623
[ikephase1authprop
osal
ikephase1authprop
osal]
Specify the authentication mofe for IKE phase1.
[ikephase1authproposal] – Available settings are:
ALL
MD5
SHA1
SHA2_256
[ikephase2proposal
ikephase2proposal]
Specify the proposal mofe for IKE phase2.
[ikephase2proposal] – Available settings are:
DES_without_Auth
DES_with_auth
3DES_without_auth
3DES_with_auth
AES128_without_auth
AES128_with_auth
AES192_without_auth
AES192_with_auth
AES256_without_auth
AES256_with_auth
[ikephase2authprop
osal
ikephase2authprop
osal]
Specify the authentication mofe for IKE phase2.
[ikephase2authproposal] – Available settings are:
ALL
MD5
SHA1
SHA2_256
[acceptall acceptall]
Specify the proposal for dial-in.
[acceptall]- Available settings are:
acceptall
acceptabove
<SectionName>
Specify a name for LAN to LAN profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960> enable
Vigor2960# configure vpn
Vigor2960@config-vpn#
Vigor2960@config-vpn# lan2lan
Vigor2960@config-vpn-l2l#
Vigor2960@config-vpn-l2l# ipsecpolicy add status enable always_on
enable vpn_l2l_carrie
Vigor2960@config-vpn-l2l# ipsecpolicy vpn_l2l_carrie
Vigor2960@config-vpn-l2l-ipsecpolicy-vpn_l2l_carrie#set gre enable
set done
Vigor2960@config-vpn-l2l-ipsecpolicy-vpn_l2l_carrie#
Vigor2960 Series User’s Guide
624
6
6
.
.
1
1
0
0
.
.
1
1
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
p
p
p
p
t
t
p
p
d
d
i
i
a
a
l
l
i
i
n
n
Users could use [pptpdialin] command to add or delete the PPTP dail-in profile or use
“show” to get the profile list in the directory. Enter the profile name to open it and modify
the profile directly.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-vpn-l2l# pptpdialin add <SectionName>
Vigor2960@config-vpn-l2l# pptpdialin delete <SectionName>
Vigor2960@config-vpn-l2l# pptpdialin show
Vigor2960@config-vpn-l2l# pptpdialin show <SectionName>
Vigor2960@config-vpn-l2l# pptpdialin <SectionName>
Command Description
pptpdialin add
<SectionName>
Add a new LAN to LAN profile.
<SectionName>- Enter the name of LAN to LAN profile.
pptpdialin delete
<SectionName>
Remove a selected LAN to LAN profile.
<SectionName> - Enter the name (e.g., dialin_carrie) of LAN to
LAN profile to be deleted.
pptpdialin show
Display the status for all LAN to LAN profiles.
pptpdialin show
<SectionName>
Display the status of selected LAN to LAN profile.
<SectionName>> - Enter the name (e.g., dialin_carrie) of LAN to
LAN profile.
pptpdialin
<SectionName>
Modify detailed settings for the selected profile.
<SectionName> - Enter the name (e.g., dialin_carrie) of LAN to
LAN profile to be modified.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure vpn
Vigor2960@config-vpn#
Vigor2960@config-vpn# lan2lan
Vigor2960@config-vpn-l2l#
Vigor2960@config-vpn-l2l# pptpdialin add pptp_carrie status enable
Vigor2960@config-vpn-l2l# pptpdialin show
pptp-l2l-din status status username
localsubnet
remotesubnet
pptp_carrie enable
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
p
p
p
p
t
t
p
p
d
d
i
i
a
a
l
l
i
i
n
n
a
a
d
d
d
d
?
?
To configure detailed settings for a PPTP dial-in profile, users could use [pptpdialin add] to
create a new profile with detailed settings.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-vpn-l2l# pptpdialin add [status status] [username
username][localsubnet localsubnet][remotesubnet remotesubnet]
[nbns_pass nbns_pass][mcast_pass mcast_pass][rip_pass rip_pass]
<SectionName>
Vigor2960 Series User’s Guide
625
Command Description
add
Create a new dial-in profile based on PPTP.
[status status]
Enable the LAN to LAN profile.
[status] - Enter Enable or Disable.
[username
username]
Specify a user name for such profile.
[username] – Enter a string as username.
[localsubnet
localsubnet]
Specify the local subnet.
[localsubnet] – Enter the subnet with mask (e.g., 192.168.1.0/24).
[remotesubnet
remotesubnet]
Specify remote subnet.
[remotesubnet] – Enter the subnet with mask (e.g., 192.168.1.0
/24).
[nbns_pass
nbns_pass]
Enable / disable the function of NetBios Naming Packet.
[nbns] - Enter Enable or Disable.
[mcast_pass
mcast_pass]
Enable / disable the function of Multicast via VPN for passing the
packets.
[mcast_pass] - Enter Enable or Disable.
[rip_pass rip_pass]
Enable / disable the function of RIP via VPN for passing the
packets.
Enter Enable or Disable.
<SectionName>
Enter the name of LAN to LAN profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure vpn
Vigor2960@config-vpn#
Vigor2960@config-vpn# lan2lan
Vigor2960@config-vpn-l2l#
Vigor2960@config-vpn-l2l# pptpdialin add dialin_carrie
Vigor2960@config-vpn-l2l#
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
t
t
,
,
g
g
e
e
t
t
,
,
d
d
i
i
s
s
c
c
o
o
n
n
n
n
e
e
c
c
t
t
It is used for reviewing the detailed settings or modifying settings for the selected profile.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-vpn-l2l-pptpdialin-<SectionName># get
Vigor2960@config-vpn-l2l-pptpdialin-<SectionName># set [status status]
[username username] [localsubnet localsubnet] [remotesubnet
remotesubnet] [nbns_pass nbns_pass] [mcast_pass mcast_pass] [rip_pass
rip_pass]
Command Description
disconnect
Terminate the LAN to LAN profile based on PPTP.
get
Get the configuration of LAN to LAN profile.
set
Modify settings for the selected LAN to LAN profile.
Vigor2960 Series User’s Guide
626
[status status]
Enable the LAN to LAN profile.
[status] - Enter Enable or Disable.
[username
username]
Specify a user profile (user account with PPTP dial-in enabled) for
such VPN LAN to LAN profile.
[username] – Enter the name of user profile (e.g., user_david).
[localsubnet
localsubnet]
Specify the local subnet.
[localsubnet] – Enter the subnet with mask (e.g., 192.168.1.0/24).
[remotesubnet
remotesubnet]
Specify remote subnet.
[remotesubnet] – Enter the subnet with mask (e.g., 192.168.1.0
/24).
[nbns_pass
nbns_pass]
Enable / disable the function of NetBios Naming Packet.
[nbns] - Enter Enable or Disable.
[mcast_pass
mcast_pass]
Enable / disable the function of Multicast via VPN for passing the
packets.
[mcast_pass] - Enter Enable or Disable.
[rip_pass rip_pass]
Enable / disable the function of RIP via VPN for passing the
packets.
Enter Enable or Disable.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure vpn
Vigor2960@config-vpn#
Vigor2960@config-vpn# lan2lan
Vigor2960@config-vpn-l2l#
Vigor2960@config-vpn-l2l# pptpdialin add dialin_carrie
Vigor2960@config-vpn-l2l# pptpdialin dialin_carrie
Vigor2960@config-vpn-l2l-pptpdialin-dialin_carrie# set status enable
username user_david
set done
Vigor2960@config-vpn-l2l-pptpdialin-dialin_carrie# set rip_pass
enable
set done
Vigor2960@config-vpn-l2l-pptpdialin-dialin_carrie# get
status : Enable
username : user_david
localsubnet :
remotesubnet :
nbns_pass : Disable
mcast_pass : Disable
rip_pass : Enable
6
6
.
.
1
1
0
0
.
.
1
1
.
.
3
3
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
p
p
p
p
t
t
p
p
d
d
i
i
a
a
l
l
o
o
u
u
t
t
Users could use [pptpdialout] command to add or delete the PPTP dail-out profile or use
“show” to get the profile list in the directory. Enter the profile name to open it and modify
the profile directly.
Vigor2960 Series User’s Guide
627
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-vpn-l2l# pptpdialout add <SectionName>
Vigor2960@config-vpn-l2l# pptpdialout delete <SectionName>
Vigor2960@config-vpn-l2l# pptpdialout show
Vigor2960@config-vpn-l2l# pptpdialout show <SectionName>
Vigor2960@config-vpn-l2l# pptpdialout <SectionName>
Command Description
pptpdialout add
<SectionName>
Add a new LAN to LAN profile.
<SectionName>- Enter the name of LAN to LAN profile.
pptpdialout delete
<SectionName>
Remove a selected LAN to LAN profile.
<SectionName> - Enter the name (e.g., dialout_carrie) of LAN to
LAN profile to be deleted.
pptpdialout show
Display the status for all LAN to LAN profiles.
pptpdialout show
<SectionName>
Display the status of selected LAN to LAN profile.
<SectionName>> - Enter the name (e.g., dialout_carrie) of LAN
to LAN profile.
pptpdialout
<SectionName>
Modify detailed settings for the selected profile.
<SectionName> - Enter the name (e.g., dialout_carrie) of LAN to
LAN profile to be modified.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure vpn
Vigor2960@config-vpn#
Vigor2960@config-vpn# lan2lan
Vigor2960@config-vpn-l2l# pptpdialout add dial_out_carrie
Vigor2960@config-vpn-l2l# pptpdialout show dial_out_carrie
status : Disable
alwayson : disable
dummy_wan_alias :
lefthost_if_alias_ip :
localhost :
idle : 300
serverip :
username :
password :
localsubnet :
remotesubnet :
natmode : 0
nbns_pass : disable
mcast_pass : disable
rip_pass : disable
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
p
p
p
p
t
t
p
p
d
d
i
i
a
a
l
l
o
o
u
u
t
t
a
a
d
d
d
d
?
?
To configure detailed settings for a PPTP dial-out profile, users could use [pptpdialout add]
to create a new profile with detailed settings.
Vigor2960 Series User’s Guide
628
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-vpn-l2l# pptpdialout add [status status] [alwayson
alwayson] [lefthost_if_alias_ip lefthost_if_alias_ip]
[lefthost_if_alias lefthost_if_alias] [lefthost_if lefthost_if]
[lefthost_if_bk lefthost_if_bk] [idle idle] [serverip serverip]
[username username] [password password] [localsubnet localsubnet]
[remotesubnet remotesubnet] [natmode natmode] [nbns_pass nbns_pass]
[mcast_pass mcast_pass] [rip_pass rip_pass] <SectionName>
Command Description
add
Create a new LAN to LAN profile.
[status status]
Enable the LAN to LAN profile.
[status] - Enter Enable or Disable.
[alwayson
alwayson]
Enable the function of Always On.
[status] - Enter Enable or Disable.
[lefthost_if_alias_ip
lefthost_if_alias_ip]
Specify one WAN Alias IP.
[lefthost_if_alias_ip] – Enter the IP address (configured as WAN
Alias IP).
[lefthost_if_alias
lefthost_if_alias]
Enable / disable the function of WAN Alias IP.
[lefthost_if_alias] – Enter Enable or Disable.
[lefthost_if
lefthost_if]
Specify the WAN interface for dialing out.
[lefthost_if] – Enter the name of WAN profile.
[lefthost_if_bk
lefthost_if_bk]
Specify WAN interface as backup WAN (failover WAN).
[lefthost_if_bk]- Enter WAN interface profile.
[idle idle]
Set a timeout for idle period.
[idle] – Enter the value. Default is 300 (sec.).
[serverip serverip]
Specify the IP address of PPTP server.
[serverip] – Enter the IP address.
[username
username]
Specify a string as username.
[username] – Enter a string.
[password
password]
Specify a password.
[password] – Enter a set of characters.
[localsubnet
localsubnet]
Specify subnet for local host.
[localsubnet] – Enter the subnet with mask (e.g., 192.168.1.0/24).
[remotesubnet
remotesubnet]
Specify the subnet mask for the remote host.
[remotesubnet] –Enter the subnet with mask (e.g.,
192.168.1.0/24).
[natmode natmode]
Specify NAT mode for LAN subnet to remote network.
[natmode] – Available settings are:
Route
NAT
[nbns_pass
nbns_pass]
Enable / disable the function of passing NetBios Naming Packet.
[nbns_pass] - Enter Enable or Disable.
Vigor2960 Series User’s Guide
629
[mcast_pass
mcast_pass]
Enable / disable the function of Multicast via VPN.
[mcast_pass] - Enter Enable or Disable.
[rip_pass rip_pass]
Enable / disable the function of passing RIP packet via VPN.
[rip_pass] - Enter Enable or Disable.
<SectionName>
Enter the name of the profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure vpn
Vigor2960@config-vpn#
Vigor2960@config-vpn# lan2lan
Vigor2960@config-vpn-l2l#pptpdialout add status enable alwayson
enable dial_out_david
Vigor2960@config-vpn-l2l#
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
t
t
,
,
g
g
e
e
t
t
,
,
c
c
o
o
n
n
n
n
e
e
c
c
t
t
,
,
d
d
i
i
s
s
c
c
o
o
n
n
n
n
e
e
c
c
t
t
It is used for reviewing the detailed settings or modifying settings for the selected dial-out
profile.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-vpn-l2l-pptpdialout-<SectionName>#connect
Vigor2960@config-vpn-l2l-pptpdialout-<SectionName>#disconnect
Vigor2960@config-vpn-l2l-pptpdialout-<SectionName>#get
Vigor2960@config-vpn-l2l-pptpdialout-<SectionName>#set [status status]
[status on_status] [alwayson alwayson][dummy_wan_alias dummy_wan_alias]
[lefthost_if_alias_ip lefthost_if_alias_ip] [lefthost_if_alias
lefthost_if_alias] [localhost lefthost_if] [localhost lefthost_if_bk]
[idle idle] [serverip serverip] [username username] [password password]
[localsubnet localsubnet] [remotesubnet remotesubnet] [natmode natmode]
[nbns_pass nbns_pass] [mcast_pass mcast_pass] [rip_pass rip_pass]
Command Description
<SectionName>
Display the name of the profile.
connect
Initiate the LAN to LAN profile based on IPsec policy.
disconnect
Terminate the LAN to LAN profile based on IPsec policy.
get
Get the configuration of LAN to LAN profile.
set
Modify settings for the selected LAN to LAN profile.
[status status]
Enable the LAN to LAN profile.
[status] - Enter Enable or Disable.
[alwayson
alwayson]
Enable the function of Always On.
[status] - Enter Enable or Disable.
[lefthost_if_alias_ip
lefthost_if_alias_ip]
Specify one WAN Alias IP.
[lefthost_if_alias_ip] – Enter the IP address (configured as WAN
Alias IP).
[lefthost_if_alias
Enable / disable the function of WAN Alias IP.
Vigor2960 Series User’s Guide
630
lefthost_if_alias]
[lefthost_if_alias] – Enter Enable or Disable.
[localhost
lefthost_if]
Specify the WAN interface for dialing out.
[lefthost] – Enter the name of WAN profile.
[localhost
lefthost_if_bk]
Specify WAN interface as backup WAN (failover WAN).
[lefthost_if_bk]- Enter WAN interface profile.
[idle idle]
Set a timeout for idle period.
[idle] – Enter the value. Default is 300 (sec.).
[serverip serverip]
Specify the IP address of PPTP server.
[serverip] – Enter the IP address.
[username
username]
Specify a string as username.
[username] – Enter a string.
[password
password]
Specify a password.
[password] – Enter a set of characters.
[localsubnet
localsubnet]
Specify subnet for local host.
[localsubnet] – Enter the subnet with mask (e.g., 192.168.1.0/24).
[remotesubnet
remotesubnet]
Specify the subnet mask for the remote host.
[remotesubnet] –Enter the subnet with mask (e.g.,
192.168.1.0/24).
[natmode natmode]
Specify NAT mode for LAN subnet to remote network.
[natmode] – Available settings are:
Route
NAT
[nbns_pass
nbns_pass]
Enable / disable the function of passing NetBios Naming Packet.
[nbns_pass] - Enter Enable or Disable.
[mcast_pass
mcast_pass]
Enable / disable the function of Multicast via VPN.
[mcast_pass] - Enter Enable or Disable.
[rip_pass rip_pass]
Enable / disable the function of passing RIP packet via VPN.
[rip_pass] - Enter Enable or Disable.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure vpn
Vigor2960@config-vpn#
Vigor2960@config-vpn# lan2lan
Vigor2960@config-vpn-l2l# pptpdialout add dial_out_carrie
Vigor2960@config-vpn-l2l# pptpdialout dial_out_carrie
Vigor2960@config-vpn-l2l-pptpdialout-dial_out_carrie#set rip_pass
enable
Vigor2960 Series User’s Guide
631
6
6
.
.
1
1
0
0
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
r
r
e
e
m
m
o
o
t
t
e
e
d
d
i
i
a
a
l
l
i
i
n
n
Users could use [remotedialin] command to configure remote dial-in profiles, then use
[ipsecremotedialin], [l2tpserver], [pptpserver] commands to set the details. Refer to the
following chapters for descriptions of commonly used commands.
Vigor2960> enable
Vigor2960# configure vpn
Vigor2960@config-vpn#
Vigor2960@config-vpn# remotedialin
Vigor2960@config-vpn-remotedialin#
6
6
.
.
1
1
0
0
.
.
2
2
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
l
l
2
2
t
t
p
p
s
s
e
e
r
r
v
v
e
e
r
r
Users could use [l2tpserver] command to configure L2TP Server, then use the [get] or [set]
command to configure the L2TP Server details information.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-vpn-remotedialin-l2tpserver#get
Vigor2960@config-vpn-remotedialin-l2tpserver#set[auth authentication]
[user_auth user_authentication] [ldap_profile ldap_profile] [lanpf
lan_profile] [dhcp_relay dhcp_relay] [dhcp_loc dhcp_loc] [relay_ip
relay_ip] [force_ipsec status]
Command Description
get
Get the configuration of L2TP server profile.
set
Modify settings for the selected L2TP server profile.
[auth
authentication]
Specify a protocol for L2TP server authentication.
[authentication] – Available settings include:
PAP
CHAP
MS_CHAP
MS_CHAP_v2
[user_auth
user_authentication
]
Specify a type for user authentication.
[user_authentication] – Available settings include:
Local
RADIUS
LDAP
[ldap_profile
ldap_profile]
Choose a LDAP profile.
[ldap_profile] – Enter the name of LDAP profile.
[lanpf lan_profile]
Specify a LAN interface for local IP address.
[lan_profile] – Enter the name of LAN interface.
[dhcp_relay
dhcp_relay]
Enable / disable the function of DHCP relay.
[dhcp_relay] - Enter Enable or Disable.
[dhcp_loc dhcp_loc]
Specify an interface for DHCP server.
[dhcp_loc]- Enter the name of WAN/LAN profile.
[relay_ip relay_ip]
Specify an IP address as DHCP relay.
Vigor2960 Series User’s Guide
632
[relay_ip]- Enter an IP address.
[force_ipsec status]
Enable / disable the function of Force L2TP with IPsec Policy.
[status] - Enter Enable or Disable.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure vpn
Vigor2960@config-vpn#
Vigor2960@config-vpn# remotedialin
Vigor2960@config-vpn-remotedialin# l2tpserver
Vigor2960@config-vpn-remotedialin-l2tpserver# get
auth : CHAP
user_auth : Local
ldap_profile :
lanpf : lan1
dhcp_relay : 0
dhcp_loc : wan1
relay_ip :
force_ipsec : enable
Vigor2960@config-vpn-remotedialin-l2tpserver#set auth MS_CHAP
dhcp_loc lan1
set done
6
6
.
.
1
1
0
0
.
.
2
2
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
p
p
p
p
t
t
p
p
s
s
e
e
r
r
v
v
e
e
r
r
Users could use [pptpserver] command to configure pptp server, then use the [get] or [set]
command to configure the PPTP server details information.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-vpn-remotedialin-pptpserver#get
Vigor2960@config-vpn-remotedialin-pptpserver#set [auth authentication]
[encp encryption] [user_auth user_authentication] [ldap_profile
ldap_profile] [lanpf lan_profile] [localhost localhost] [dhcp_relay
dhcp_relay] [dhcp_loc dhcp_loc] [relay_ip relay_ip] [mss pptp_mss]
[disable_nbns dummy] [disable_mcast disable_mcast] [disable_pptp_fpp
dummy]
Command Description
get
Get the configuration of PPTP server profile.
set
Modify settings for the selected PPTP server profile.
[auth
authentication]
Specify a protocol for PPTP server authentication.
[authentication] – Available settings include:
PAP
CHAP
MS_CHAP
MS_CHAP_v2
[encp encryption]
Set the encryption length for PPTP server.
Vigor2960 Series User’s Guide
633
[encryption] – Availalbel settings include:
40/128_bit
128_bit
Disable
[user_auth
user_authentication
]
Specify a type for user authentication.
[user_authentication] – Available settings include:
Local
RADIUS
LDAP
[ldap_profile
ldap_profile]
Choose a LDAP profile.
[ldap_profile] – Enter the name of LDAP profile.
[lanpf lan_profile]
Specify a LAN interface for local IP address.
[lan_profile] – Enter the name of LAN interface.
[localhost localhost]
Specify a WAN interface.
[localhost] – Enter the name of WAN profile.
[dhcp_relay
dhcp_relay]
Enable / disable the function of DHCP relay.
[dhcp_relay] - Enter Enable or Disable.
[dhcp_loc dhcp_loc]
Specify an interface for DHCP server.
[dhcp_loc]- Enter the name of WAN/LAN profile.
[relay_ip relay_ip]
Specify an IP address as DHCP relay.
[relay_ip]- Enter an IP address.
[mss pptp_mss]
Specify MSS value for PPTP server.
[pptp_mss]- Enter a number for MTU/MRU. (Maximum is 1500).
[disable_nbns
dummy]
Let the NetBios Naming Packet pass through or be blocked.
[dummy] - Enter Pass or Block.
[disable_mcast
disable_mcast]
Let the Multicast Packet pass through or be blocked.
[disable_mcast]- Enter Pass or Block.
[disable_pptp_fpp
dummy]
Enable (Pass) / disable (Block) the function of PPTP acceleration.
[dummy] - Enter Pass or Block.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure vpn
Vigor2960@config-vpn#
Vigor2960@config-vpn# remotedialin
Vigor2960@config-vpn-remotedialin#
Vigor2960@config-vpn-remotedialin# pptpserver
Vigor2960@config-vpn-remotedialin-pptpserver#
Vigor2960@config-vpn-remotedialin-pptpserver# get
auth : MS_CHAP_v2
encp : 128_bit
user_auth : Local
ldap_profile :
Vigor2960 Series User’s Guide
634
lanpf : lan1
localhost :
dhcp_relay : 0
dhcp_loc : wan1
relay_ip :
mss : 1300
dummy : 1
disable_mcast : 1
dummy : Enable
Vigor2960@config-vpn-remotedialin-pptpserver#set encp 40/128_bit lanpf
lan_carrie
set done
set dummy pass dummy block
6
6
.
.
1
1
0
0
.
.
3
3
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
t
t
r
r
u
u
n
n
k
k
Users could use [trunk] command to configure VPN TRUNK Manager, then use
[ipseclbpool], [ipseclbrule] commands to set the details. Refer to the following sections for
descriptions of commonly used commands.
Vigor2960> enable
Vigor2960# configure vpn
Vigor2960@config-vpn#
Vigor2960@config-vpn# trunk
Vigor2960@config-vpn-trunk#
6
6
.
.
1
1
0
0
.
.
3
3
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
i
i
p
p
s
s
e
e
c
c
l
l
b
b
r
r
u
u
l
l
e
e
Users could use [ipseclbrule] command to add or delete the Load Balance Rule profile or use
“show” to get the profile list in the directory. Enter the profile name to open it and modify
the profile directly.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-vpn-trunk# ipseclbrule add <SectionName>
Vigor2960@config-vpn-trunk# ipseclbrule delete <SectionName>
Vigor2960@config-vpn-trunk# ipseclbrule show
Vigor2960@config-vpn-trunk# ipseclbrule show <SectionName>
Vigor2960@config-vpn-trunk# ipseclbrule <SectionName>
Command Description
ipseclbrule add
<SectionName>
Add a new load balance profile.
<SectionName> - Enter the name of load balance profile.
ipseclbrule delete
<SectionName>
Remove a selected load balance profile.
<SectionName> - Enter the name (e.g., lbrule_carrie) of load
balance profile to be deleted.
ipseclbrule show
Display the status for all load balance profiles.
ipseclbrule show
<SectionName>
Display the status of selected load balance profile.
<SectionName> - Enter the name (e.g., lbrule_carrie) of load
balance profile.
ipseclbrule
Modify detailed settings for the selected profile.
Vigor2960 Series User’s Guide
635
<SectionName>
<SectionName> - Enter the name (e.g., lbrule_carrie) of load
balance profile to be modified.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure vpn
Vigor2960@config-vpn#
Vigor2960@config-vpn# trunk
Vigor2960@config-vpn-trunk# ipseclbrule add lbrule_carrie
Vigor2960@config-vpn-ipsec-trunk-lb-rule-lbrule_carrie#
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
i
i
p
p
s
s
e
e
c
c
l
l
b
b
r
r
u
u
l
l
e
e
a
a
d
d
d
d
?
?
To configure detailed settings for a profile, users could use [ipseclbrule add] to create a new
profile with detailed settings.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-vpn-trunk# ipseclbrule add [status status] [proto
protocol] [sip src_ip] [smask src_mask] [dip dest_ip] [dmask dest_mask]
[dport dest_port] [dport_end dest_port_end] [pool lb_pool]
<SectionName>
Command Description
[status status]
Enable the load balance profile.
[status] - Enter Enable or Disable.
[proto protocol]
Specify a protocol for load balance profile.
[protocol] – Available settings include:
ALL
TCP/UDP
TCP
UDP
ICMP
FTP
TFTP
HTTP
SMTP
POP3
[sip src_ip]
Specify an IP address as source IP.
[src_ip]- Enter an IP address.
[smask src_mask]
Specify subnet mask for source IP.
[src_mask] – Enter a subnet mask.
[dip dest_ip]
Specify an IP address as destination IP.
[dest_ip]- Enter an IP address.
[dmask dest_mask]
Specify subnet mask for destination IP.
[dest_mask] – Enter a subnet mask.
Vigor2960 Series User’s Guide
636
[dport dest_port]
Specify a port number as destination port.
[dest_port] – Enter a value.
[dport_end
dest_port_end]
Specify the ending port number.
[dest_port_end] – Enter a value.
[pool lb_pool]
Specify a load balance pool profile.
[lb_pool] – Enter the name of the load balance pool profile.
<SectionName>
Enter the name (e.g., lbrule_carrie) of IPsec load balance profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure vpn
Vigor2960@config-vpn#
Vigor2960@config-vpn# trunk
Vigor2960@config-vpn-trunk#ipseclbrule add status enable proto ALL
sip 192.168.1.59 ibrule_david
Vigor2960@config-vpn-ipsec-trunk-lb-rule-ibrule_david#
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
t
t
,
,
g
g
e
e
t
t
It is used for reviewing the detailed settings or modifying settings for the selected load
balance profile (e.g., lbrule_david).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-vpn-ipsec-trunk-lb-rule-<SectionName>#get
Vigor2960@config-vpn-ipsec-trunk-lb-rule-<SectionName>#set [status
status] [proto protocol] [sip src_ip] [smask src_mask] [dip dest_ip]
[dmask dest_mask] [dport dest_port] [dport_end dest_port_end] [pool
lb_pool]
Command Description
get
Get the configuration of load balance rule profile.
set
Modify settings for the selected load balance rule profile.
[status status]
Enable the load balance profile.
[status] - Enter Enable or Disable.
[proto protocol]
Specify a protocol for load balance profile.
[protocol] – Available settings include:
ALL
TCP/UDP
TCP
UDP
ICMP
FTP
TFTP
HTTP
SMTP
Vigor2960 Series User’s Guide
637
POP3
[sip src_ip]
Specify an IP address as source IP.
[src_ip]- Enter an IP address.
[smask src_mask]
Specify subnet mask for source IP.
[src_mask] – Enter a subnet mask.
[dip dest_ip]
Specify an IP address as destination IP.
[dest_ip]- Enter an IP address.
[dmask dest_mask]
Specify subnet mask for destination IP.
[dest_mask] – Enter a subnet mask.
[dport dest_port]
Specify a port number as destination port.
[dest_port] – Enter a value.
[dport_end
dest_port_end]
Specify the ending port number.
[dest_port_end] – Enter a value.
[pool lb_pool]
Specify a load balance pool profile.
[lb_pool] – Enter the name of the load balance pool profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure vpn
Vigor2960@config-vpn#
Vigor2960@config-vpn# trunk
Vigor2960@config-vpn-trunk#
Vigor2960@config-vpn-trunk# ipseclbrule ibrule_david
Vigor2960@config-vpn-ipsec-trunk-lb-rule-ibrule_david# get
status : Enable
proto : ALL
sip : 192.168.1.59
smask :
dip :
dmask :
dport :
dport_end :
pool :
6
6
.
.
1
1
0
0
.
.
3
3
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
i
i
p
p
s
s
e
e
c
c
l
l
b
b
p
p
o
o
o
o
l
l
Users could use [ipseclbpool] command to add or delete the Load Balance pool profile or use
“show” to get the profile list in the directory. Enter the profile name to open it and modify
the profile directly.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-vpn-trunk# ipseclbpool add <SectionName>
Vigor2960@config-vpn-trunk# ipseclbpool delete <SectionName>
Vigor2960@config-vpn-trunk# ipseclbpool show
Vigor2960@config-vpn-trunk# ipseclbpool show <SectionName>
Vigor2960@config-vpn-trunk# ipseclbpool <SectionName>
Vigor2960 Series User’s Guide
638
Command Description
ipseclbpool add
<SectionName>
Add a new load balance pool profile.
<SectionName> - Enter the name of load balance pool profile.
ipseclbpool delete
<SectionName>
Remove a selected load balance pool profile.
<SectionName> - Enter the name (e.g., lbpool_carrie) of load
balance pool profile to be deleted.
ipseclbpool show
Display the status for all load balance pool profiles.
ipseclbpool show
<SectionName>
Display the status of selected load balance pool profile.
<SectionName> - Enter the name (e.g., lbpool_carrie) of load
balance pool profile.
ipseclbpool
<SectionName>
Modify detailed settings for the selected profile.
<SectionName> - Enter the name (e.g., lbpool_carrie) of load
balance pool profile to be modified.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure vpn
Vigor2960@config-vpn#
Vigor2960@config-vpn# trunk
Vigor2960@config-vpn-trunk# ipseclbpool add lbpool_carrie
Vigor2960@config-vpn-trunk-ipsec-lb-pool-lbpool_carrie#..
Vigor2960@config-vpn-trunk# ipseclbpool show lbpool_carrie
mode : Load_Balance
lbif :
primary :
backup :
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
i
i
p
p
s
s
e
e
c
c
l
l
b
b
p
p
o
o
o
o
l
l
a
a
d
d
d
d
?
?
To configure detailed settings for a profile, users could use [ipseclpool add] to create a new
profile with detailed settings.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-vpn-trunk# ipseclbpool add [mode mode] [lbif lb_iface]
<SectionName>
Command Description
[mode mode]
Specify load balance mode.
[mode] – Available settings include:
Load_Balance
Backup
[lbif lb_iface]
Specify an interface for applying load balance pool.
[lb_iface] – Enter the name of LAN/WAN profile.
<SectionName>
Enter the name (e.g., lbpool_david) of load balance pool profile.
Vigor2960 Series User’s Guide
639
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure vpn
Vigor2960@config-vpn#
Vigor2960@config-vpn# trunk
Vigor2960@config-vpn-trunk#ipseclbpool add mode load_balance
ibpool_david
Vigor2960@config-vpn-ipsec-trunk-lb-pool-ibpool_david#
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
t
t
,
,
g
g
e
e
t
t
,
,
a
a
d
d
d
d
,
,
r
r
e
e
m
m
o
o
v
v
e
e
It is used for reviewing the detailed settings or modifying settings for the selected load
balance profile (e.g., lbpool_david).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-vpn-ipsec-trunk-lb-pool-<SectionName>#add <lb_iface>
Vigor2960@config-vpn-ipsec-trunk-lb-pool-<SectionName>#get
Vigor2960@config-vpn-ipsec-trunk-lb-pool-<SectionName>#set [mode mode]
[lbif lb_iface]
Vigor2960@config-vpn-ipsec-trunk-lb-pool-<SectionName>#remove [lbif
lb_iface]
Command Description
<SectionName>
Display the name of load balance pool profile.
add <lb_iface>
Add the interface setting for load balance pool profile.
<lb_iface> - Enter the name of VPN profile with GRE enabled
(e.g., vpn_l2l_carrie).
get
Get the configuration of load balance pool profile.
set
Modify settings for the selected load balance pool profile.
[mode mode]
Specify load balance mode.
[mode] – Available settings include:
Load_Balance
Backup
[lbif lb_iface]
Specify an interface for applying load balance pool.
[lb_iface] – Enter the name of LAN/WAN profile.
remove [lbif
lb_iface]
Remove the load balance interface setting.
[lb_iface] - Enter the name of VPN profile with GRE enabled
(e.g., vpn_l2l_carrie).
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure vpn
Vigor2960@config-vpn#
Vigor2960@config-vpn# trunk
Vigor2960@config-vpn-trunk#
Vigor2960@config-vpn-trunk# ipseclbpool ibpool_david
Vigor2960 Series User’s Guide
640
Vigor2960@config-vpn-ipsec-trunk-lb-pool-ibpool_david# set lbif
vpn_l2l_carrie
Vigor2960@config-vpn-trunk-ipsec-lb-pool-ibpool_david# set lbif
vpn_l2l_carrie
set done
Vigor2960@config-vpn-trunk-ipsec-lb-pool-ibpool_david# get
mode : Load_Balance
lbif : vpn_l2l_carrie
primary :
backup :
6
6
.
.
1
1
1
1
B
B
a
a
n
n
d
d
w
w
i
i
d
d
t
t
h
h
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
Vigor2960 provides three functions in Bandwidth Managemant – bandwidth limit and
sessions limit .Users could use the commands below to set up the details.
To make bandwidth management configuration, you have to type “
configure bandwidth”
to access into next phase.
Vigor2960>enable
Vigor2960# configure bandwidth
Vigor2960@config-bandwidth#
There are several functions for Bandwidth Managemant – Access Barrier, Bandwidth Limit
and Session Limit.
Available sub-commands under Bandwidth include:
- access_barrier (refer to 6.11.1)
- bandwidth_limit (refer to 6.11.2)
- sesslimit (refer to 6.11.3)
Note:
[XXX XXX] - [ ] means such command is optional. The former is command itself; the
latter is value/selection for such command.
<XXX XXX> - < > means such command is required. The former is command itself;
the latter is value/selection for such command.
6
6
.
.
1
1
1
1
.
.
1
1
T
T
e
e
l
l
e
e
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
a
a
c
c
c
c
e
e
s
s
s
s
_
_
b
b
a
a
r
r
r
r
i
i
e
e
r
r
Users could use [access_barrier] command configure the access barrier to protect the system
from brute-force attack and flooding attack
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-bandwidth# access_barrier [option] [action]
Command Description
access_barrier
[option] [action]
Specify the type of access barrier.
[option] – Available settings include:
Vigor2960 Series User’s Guide
641
pptp
Ipsec
Web
telnet
https
ssh
ftp
[action] – Enable or disable the access barrier function.
on
off
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure bandwidth
Vigor2960@config-bandwidth#
Vigor2960@config-bandwidth# access_barrier pptp on
Success !!
Vigor2960@config-bandwidth#
6
6
.
.
1
1
1
1
.
.
2
2
T
T
e
e
l
l
e
e
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
b
b
a
a
n
n
d
d
w
w
i
i
d
d
t
t
h
h
_
_
l
l
i
i
m
m
i
i
t
t
Users could use [bandwidth_limit] command to add or delete the bandwidth limit profile or
use “show” to get the profile list in the directory. Enter the profile name to open it and
modify the profile directly.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-bandwidth# bandwidth_limit add <SectionName>
Vigor2960@config-bandwidth# bandwidth_limit delete <SectionName>
Vigor2960@config-bandwidth# bandwidth_limit show
Vigor2960@config-bandwidth# bandwidth_limit show <SectionName>
Vigor2960@config-bandwidth# bandwidth_limit <SectionName>
Command Description
bandwidth_limit
add <SectionName>
Add a new bandwidth limit profile.
<SectionName> - Enter the name of bandwidth limit profile.
bandwidth_limit
delete
<SectionName>
Remove a selected bandwidth limit profile.
<SectionName> - Enter the name (e.g., bandli_carrie) of
bandwidth limit profile to be deleted.
bandwidth_limit
show
Display the status for all bandwidth limit profiles.
bandwidth_limit
show
<SectionName>
Display the status of selected bandwidth limit profile.
<SectionName> - Enter the name (e.g., bandli_carrie) of
bandwidth limit profile.
bandwidth_limit
<SectionName>
Modify detailed settings for the selected profile.
<SectionName> - Enter the name (e.g., bandli_carrie) of
bandwidth limit profile to be modified.
Vigor2960 Series User’s Guide
642
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure bandwidth
Vigor2960@config-bandwidth# bandwidth_limit add bandli_carrie
Vigor2960@config-bw-limit-bandli_carrie#
6
6
.
.
1
1
1
1
.
.
2
2
.
.
1
1
T
T
e
e
l
l
e
e
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
b
b
a
a
n
n
d
d
w
w
i
i
d
d
t
t
h
h
_
_
l
l
i
i
m
m
i
i
t
t
a
a
d
d
d
d
?
?
To configure detailed settings for a bandwidth limit profile, users could use [bandwidth_limit
add] to create a new bandwidth limit profile with detailed settings.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-bandwidth# bandwidth_limit add [status status]
[rx_limit rx_limit] [tx_limit tx_limit] [mode mode] [ip_obj ip_obj]
[ip_grp ip_grp] [time_objs time_objs] [time_grps time_grps] [usr_obj
usr_obj] [usr_grp usr_grp] [ldap_grp ldap_grp][user_obj user_obj]
[usr_grp usr_grp] [guest_grp guest_grp] [srv_obj srv_obj] [srv_grp
srv_grp] <SectionName>
Command Description
[status status]
Enable / disable the bandwidth limit profile.
[status] - Enter Enable or Disable the bandwidth limit profile.
[rx_limit rx_limit]
Define the limitation for the speed of the downstream.
[rx_limit] - Enter a number (0 is not allowed).
[tx_limit tx_limit]
Define the limitation for the speed of the upstream.
[tx-limit] - Enter a number (0 is not allowed).
[mode mode]
Select Each to make each IP within the range of Start IP and End
IP having the same speed defined in TX limit and RX limit fields;
select Shared to make all the IPs within the range of Start IP and
End IP share the speed defined in TX limit and RX limit fields.
[mode] - Available modes include:
Each
Shared
[ip_obj ip_obj]
Specify an IP object to apply such profile.
[ip_obj] - Enter a name of the IP object profile.
[ip_grp ip_grp]
Specify an IP group to apply such profile.
[ip_grp] - Enter a name of the IP group profile.
[time_objs
time_objs]
Specify a time object to apply such profile.
[time_objs] - Enter a name of the time object profile.
[time_grps
time_grps]
Specify a time group to apply such profile.
[time_grps] - Enter a name of the time group profile.
[usr_obj usr_obj]
Specify a user account object to apply such profile.
[usr_obj] - Enter a name of the user account object profile.
[usr_grp usr_grp]
Specify a user group to apply such profile.
[usr_grp] - Enter a name of the user group profile.
Vigor2960 Series User’s Guide
643
[ldap_grp
ldap_grp]
Specify a LDAP group to apply such profile.
[ldap_grp] - Enter a name of the LDAP group profile.
[guest_grp
guest_grp]
Specify a guest group to apply such profile.
[guest_grp] - Enter a name of the guest group profile.
[srv_obj srv_obj]
Specify a service object to apply such profile.
[usr_obj] - Enter a name of the service object profile.
[srv_grp srv_grp]
Specify a service group to apply such profile.
[usr_grp] - Enter a name of the service group profile.
<SectionName>
<SectionName> - Enter the name (e.g., bandli_david) of
bandwidth limit profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure bandwidth
Vigor2960@config-bandwidth# bandwidth_limit add status enable ip_grp
ip_grp_david bandli_david
Vigor2960@config-bw-limit-bandli_david#
6
6
.
.
1
1
1
1
.
.
2
2
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
t
t
,
,
g
g
e
e
t
t
It is used for reviewing the detailed settings or modifying settings for the selected bandwidth
limit profile (e.g., bandli_david).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-bw-limit-<SectionName># get
Vigor2960@config-bw-limit-<SectionName># set [status status] [rx_limit
rx_limit] [tx_limit tx_limit] [mode mode] [ip_objip_obj] [ip_grp ip_grp]
[time_objs time_objs] [time_grps time_grps] [usr_obj usr_obj] [usr_grp
usr_grp] [ldap_grp ldap_grp] [usr_obj usr_obj] [usr_grp usr_grp]
[ldap_grp ldap_grp] [guest_grp guest_grp] [srv_obj srv_obj] [srv_grp
srv_grp]
Command Description
<SectionName>
Display the name of bandwidth limit profile.
get
Get the configuration of bandwidth limit profile.
set
Modify settings for the selected bandwidth limit profile.
[status status]
Enable / disable the bandwidth limit profile.
[status] - Enter Enable or Disable the bandwidth limit profile.
[rx_limit rx_limit]
Define the limitation for the speed of the downstream.
[rx_limit] - Enter a number (0 is not allowed).
[tx_limit tx_limit]
Define the limitation for the speed of the upstream.
[tx-limit] - Enter a number (0 is not allowed).
[mode mode]
Select Each to make each IP within the range of Start IP and End
IP having the same speed defined in TX limit and RX limit fields;
select Shared to make all the IPs within the range of Start IP and
Vigor2960 Series User’s Guide
644
End IP share the speed defined in TX limit and RX limit fields.
[mode] - Available modes include:
Each
Shared
[ip_obj ip_obj]
Specify an IP object to apply such profile.
[ip_obj] - Enter a name of the IP object profile.
[ip_grp ip_grp]
Specify an IP group to apply such profile.
[ip_grp] - Enter a name of the IP group profile.
[time_objs
time_objs]
Specify a time object to apply such profile.
[time_objs] - Enter a name of the time object profile.
[time_grps
time_grps]
Specify a time group to apply such profile.
[time_grps] - Enter a name of the time group profile.
[usr_obj usr_obj]
Specify a user account object to apply such profile.
[usr_obj] - Enter a name of the user account object profile.
[usr_grp usr_grp]
Specify a user group to apply such profile.
[usr_grp] - Enter a name of the user group profile.
[ldap_grp
ldap_grp]
Specify a LDAP group to apply such profile.
[ldap_grp] - Enter a name of the LDAP group profile.
[guest_grp
guest_grp]
Specify a guest group to apply such profile.
[guest_grp] - Enter a name of the guest group profile.
[srv_obj srv_obj]
Specify a service object to apply such profile.
[usr_obj] - Enter a name of the service object profile.
[srv_grp srv_grp]
Specify a service group to apply such profile.
[usr_grp] - Enter a name of the service group profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure bandwidth
Vigor2960@config-bandwidth# bandwidth_limit add bandli_david
Vigor2960@config-bw-limit-bandli_david# set status enable
set done
Vigor2960@config-bw-limit-bandli_david# set rx_limit 1000 ip_obj
ip_david
set done
Vigor2960@config-bw-limit-bandli_david# get
status : enable
rx_limit : 1000
tx_limit :
mode :
ip_obj : ip_david
ip_grp :
time_objs :
time_grps :
usr_obj :
usr_grp :
ldap_grp :
Vigor2960 Series User’s Guide
645
guest_grp :
srv_obj :
srv_grp :
Vigor2960@config-bw-limit-bandli_david#
6
6
.
.
1
1
1
1
.
.
3
3
T
T
e
e
l
l
e
e
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
s
s
s
s
l
l
i
i
m
m
i
i
t
t
Users could use [sesslimit] command to add or delete the sessions limit profiles or use
“show” to get the profile list in the directory. Enter the profile name to open it and modify
the profile directly.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-bandwidth# sesslimit add <SectionName>
Vigor2960@config-bandwidth# sesslimit delete <SectionName>
Vigor2960@config-bandwidth# sesslimit show
Vigor2960@config-bandwidth# sesslimit show <SectionName>
Vigor2960@config-bandwidth# sesslimit <SectionName>
Command Description
sesslimit add
<SectionName>
Add a new session limit profile.
<SectionName> - Enter the name of session limit profile.
sesslimit delete
<SectionName>
Remove a selected session limit profile.
<SectionName> - Enter the name (e.g., sess_carrie) of session
limit profile to be deleted.
sesslimit show
Display the status for all session limit profiles.
sesslimit show
<SectionName>
Display the status of selected session limit profile.
<SectionName> - Enter the name (e.g., sess_carrie) of session
limit profile.
sesslimit
<SectionName>
Modify detailed settings for the selected profile.
<SectionName> - Enter the name (e.g., sess_carrie) of session
limit profile to be modified.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure bandwidth
Vigor2960@config-bandwidth# sesslimit add sess_carrie
Vigor2960@config-bw-sesslimit-sess_carrie#
6
6
.
.
1
1
1
1
.
.
3
3
.
.
1
1
T
T
e
e
l
l
e
e
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
s
s
s
s
l
l
i
i
m
m
i
i
t
t
a
a
d
d
d
d
?
?
To configure detailed settings for a session limit profile, users could use [sesslimit add] to
create a new session limit profile with detailed settings.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-bandwidth# sesslimit add [status status] [session
session] [ip_obj ip_obj] [ip_grp ip_grp] [time_objs time_objs]
[time_grps time_grps] [usr_obj usr_obj] [usr_grp usr_grp] [ldap_grp
ldap_grp] [guest_grp guest_grp] <SectionName>
Vigor2960 Series User’s Guide
646
Command Description
[status status]
Enable / disable the session limit profile.
[status] - Enter Enable or Disable the session limit profile.
[session session]
Define the maximum sessions for such profile.
[session] – Enter a number ranging from 20 to 1000.
[ip_obj ip_obj]
Specify an IP object to apply such profile.
[ip_obj] - Enter a name of the IP object profile.
[ip_grp ip_grp]
Specify an IP group to apply such profile.
[ip_grp] - Enter a name of the IP group profile.
[time_objs
time_objs]
Specify a time object to apply such profile.
[time_objs] - Enter a name of the time object profile.
[time_grps
time_grps]
Specify a time group to apply such profile.
[time_grps] - Enter a name of the time group profile.
[usr_obj usr_obj]
Specify a user account object to apply such profile.
[usr_obj] - Enter a name of the user account object profile.
[usr_grp usr_grp]
Specify a user group to apply such profile.
[usr_grp] - Enter a name of the user group profile.
[ldap_grp
ldap_grp]
Specify a LDAP group to apply such profile.
[ldap_grp] - Enter a name of the LDAP group profile.
[guest_grp
guest_grp]
Specify a guest group to apply such profile.
[guest_grp] - Enter a name of the guest group profile.
<SectionName>
< SectionName > - Enter the name (e.g., session_david) of session
limit profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure bandwidth
Vigor2960@config-bandwidth# sesslimit add status enable ip_obj
ip_obj_david session_david
Vigor2960@config-bw-sesslimit-session_david#
6
6
.
.
1
1
1
1
.
.
3
3
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
e
e
t
t
,
,
g
g
e
e
t
t
It is used for reviewing the detailed settings or modifying settings for the selected session
limit profile (e.g., session_david).
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-bw-sesslimit-<SectionName># get
Vigor2960@config-bw-sesslimit-<SectionName># set [status status]
[session session] [ip_obj ip_obj] [ip_grp ip_grp] [time_objs time_objs]
[time_grps time_grps] [usr_obj usr_obj] [usr_grp usr_grp][ldap_grp
ldap_grp] [guest_grp guest_grp]
Command Description
Vigor2960 Series User’s Guide
647
<SectionName>
Display the name of session limit profile.
get
Get the configuration of session limit profile.
set
Modify settings for the selected session limit profile.
[status status]
Enable / disable the session limit profile.
[status] - Enter Enable or Disable the session limit profile.
[session session]
Define the maximum sessions for such profile.
[session] – Enter a number ranging from 20 to 1000.
[ip_obj ip_obj]
Specify an IP object to apply such profile.
[ip_obj] - Enter a name of the IP object profile.
[ip_grp ip_grp]
Specify an IP group to apply such profile.
[ip_grp] - Enter a name of the IP group profile.
[time_objs
time_objs]
Specify a time object to apply such profile.
[time_objs] - Enter a name of the time object profile.
[time_grps
time_grps]
Specify a time group to apply such profile.
[time_grps] - Enter a name of the time group profile.
[usr_obj usr_obj]
Specify a user account object to apply such profile.
[usr_obj] - Enter a name of the user account object profile.
[usr_grp usr_grp]
Specify a user group to apply such profile.
[usr_grp] - Enter a name of the user group profile.
[ldap_grp
ldap_grp]
Specify a LDAP group to apply such profile.
[ldap_grp] - Enter a name of the LDAP group profile.
[guest_grp
guest_grp]
Specify a guest group to apply such profile.
[guest_grp] - Enter a name of the guest group profile.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure bandwidth
Vigor2960@config-bandwidth# sesslimit add status enable ip_obj
ip_obj_david session_david
Vigor2960@config-bw-sesslimit-session_david# set ip_grp ip_grp_david
usr_obj usr_david
set done
Vigor2960@config-bw-sesslimit-session_david# get
status : enable
session : 1000
ip_obj : ip_obj_david
ip_grp : ip_grp_david
time_objs :
time_grps :
usr_obj : usr_david
usr_grp :
ldap_grp :
guest_grp :
Vigor2960 Series User’s Guide
648
6
6
.
.
1
1
2
2
S
S
y
y
s
s
t
t
e
e
m
m
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
Vigor2960 provides many functions in system management .Users could use the commands
below to set up the details.
To make system management configuration, you have to type “
configure system” to
access into next phase.
Vigor2960>enable
Vigor2960# configure system
Vigor2960@config-sys#
There are several functions for System Managemant – acc_ctrl, admin_passwd,
autodiscovery, cc, cmm, config, firmware, mailalert, ntpclient, reboot, snmpagent, syslogd
and tr069.
Available sub-commands under System include:
- acc_ctrl (refer to 6.12.1)
- admin_passwd (refer to 6.12.2)
- autodiscovery (refer to 6.12.3)
- cc (refer to 6.12.4)
- cmm (refer to 6.12.5)
- config (refer to 6.12.6)
- firmware (refer to 6.12.7)
- mailalert (refer to 6.12.8)
- ntpclient (refer to 6.12.9)
- reboot (refer to 6.12.10)
- snmpagent (refer to 6.12.11)
- syslogd (refer to 6.12.12)
- tr069 (refer to 6.12.13)
Note:
[XXX XXX] - [ ] means such command is optional. The former is command itself; the
latter is value/selection for such command.
<XXX XXX> - < > means such command is required. The former is command itself;
the latter is value/selection for such command.
6
6
.
.
1
1
2
2
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
a
a
c
c
c
c
_
_
c
c
t
t
r
r
l
l
Users could use the [acc_ctrl] command to configure Access control and type the [get], [set]
command to configure the details information.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-sys# acc_ctrl get
Vigor2960@config-sys# acc_ctrl set [disable_auto_logout
disable_auto_logout] [validation_code validation_code] [fail_times
fail_times] [upload_login_image_status upload_login_image_status]
[enforce_https enforce_https] [apply_to_wan_interface apply_to_wan_if]
[web_allow web_allow] [telnet_allow telnet_allow] [ssh_allow ssh_allow]
Vigor2960 Series User’s Guide
649
[https_allow https_allow] [sslproxy_allow sslproxy_allow] [ftp_allow
ftp_allow] [samba_allow samba_allow] [tr069_allow tr069_allow]
[server_cert server_cert] [user_define_ip user_define_ip] [allow_ip
allow_ip] [wan_ping_allow wan_ping_allow] [allow_to_lan allow_to_lan]
[apply_to_lan_subnet apply_to_lan_subnet] [web_lan_allow web_lan_allow]
[telnet_lan_allow telnet_lan_allow] [ssh_lan_allow ssh_lan_allow]
[https_lan_allow https_lan_allow] [sslproxy_lan_allow
sslproxy_lan_allow] [ftp_lan_allow ftp_lan_allow] [samba_lan_allow
samba_lan_allow] [tr069_lan_allow tr069_lan_allow] [lan_ping_allow
lan_ping_allow] [web_port web_port] [telnet_port telnet_port] [ssh_port
ssh_port] [https_port https_port] [sslproxy_port sslproxy_port]
[sslvpn_port sslvpn_port] [ftp_port ftp_port] [mngt_wan mngt_wan]
Command Description
get
Get the configuration of access control.
set
Configure settings for access control.
[disable_auto_logou
t
disable_auto_logout
]
Enable / disable the function of Auto-Logout.
[disable_auto_logout] - Enter Enable or Disable.
[validation_code
validation_code]
Enable / disable the function of Validation Code.
[validation_code] - Enter Enable or Disable.
[fail_times
fail_times]
It is available when Use Validation Code is enabled. The number
selected here means the times for login failure that will trigger
Validation Code for authentication.
[fail_times] – Available settings include: 0, 1, 2, 3, 4 and 5.
[upload_login_imag
e_status
upload_login_image
_status]
Enable / disable the function of specifying an image file which
will be displayed on the login page when a user or guest tries to
access into Internet.
[upload_login_image_status] - Enter Enable or Disable.
[enforce_https
enforce_https]
Force the user accessing into web user interface of Vigor router by
HTTPS.
[enforce_https] - Enter Enable or Disable.
[apply_to_wan_inte
rface
apply_to_wan_if]
Specify the WAN interface(s) to apply such feature.
[apply_to_wan_if] – Enter the name for one WAN interace (e.g.,
wan1, wan2, wan3, wan4, wan5, usb1, usb2).
[web_allow
web_allow]
Enable or disable the permission of web access.
[web_allow] - Enter Enable or Disable.
[telnet_allow
telnet_allow]
Enable or disable the permission of telnet access.
[telnet_allow] - Enter Enable or Disable.
[ssh_allow
ssh_allow]
Enable or disable the permission of SSH access.
[ssh_allow] - Enter Enable or Disable.
[https_allow
https_allow]
Enable or disable the permission of HTTPS access.
[https_allow] - Enter Enable or Disable.
[sslproxy_allow
sslproxy_allow]
Enable or disable the permission of SSL Proxy access.
[sslproxy_allow] - Enter Enable or Disable.
Vigor2960 Series User’s Guide
650
[ftp_allow
ftp_allow]
Enable or disable the permission of FTP access.
[ftp_allow] - Enter Enable or Disable.
[samba_allow
samba_allow]
Enable or disable the permission of SAMBA access.
[samba_allow] - Enter Enable or Disable.
[tr069_allow
tr069_allow]
Enable or disable the permission of TR069 access.
[tr069_allow] - Enter Enable or Disable.
[server_cert
server_cert]
Specify a server certificate.
[server_cert] – Enter ‘Default” to use the default sever certificate.
[user_define_ip
user_define_ip]
Enable or disable the function of user defined IP address.
[user_define_ip] - Enter Enable or Disable.
[allow_ip allow_ip]
System administrator can login from the IP address defined here.
[allow_ip] – Enter IP address with subnet mask (ex,
192.168.1.11/24).
[wan_ping_allow
wan_ping_allow]
Enable / disable the function of Allow Ping from WAN.
[wan_ping_allow] - Enter Enable or Disable.
[allow_to_lan
allow_to_lan]
Enable / disable the function of Allow management from LAN.
[allow_to_lan]- Enter Enable or Disable.
[apply_to_lan_subn
et
apply_to_lan_subne
t]
Specify which LAN interface shall be applied to.
[apply_to_lan_subnet] – Enter the name of LAN profile (e.g.,
lan1).
[web_lan_allow
web_lan_allow]
Enable or disable the permission of web access.
[web_lan_allow] - Enter Enable or Disable.
[telnet_lan_allow
telnet_lan_allow]
Enable or disable the permission of telnet access.
[telnet_lan_allow] - Enter Enable or Disable.
[ssh_lan_allow
ssh_lan_allow]
Enable or disable the permission of SSH access.
[ssh_lan_allow] - Enter Enable or Disable.
[https_lan_allow
https_lan_allow]
Enable or disable the permission of HTTPS access.
[https_lan_allow] - Enter Enable or Disable.
[sslproxy_lan_allow
sslproxy_lan_allow]
Enable or disable the permission of SSL Proxy access.
[sslproxy_lan_allow] - Enter Enable or Disable.
[ftp_lan_allow
ftp_lan_allow]
Enable or disable the permission of FTP access.
[ftp_lan_allow]- Enter Enable or Disable.
[samba_lan_allow
samba_lan_allow]
Enable or disable the permission of SAMBA access.
[samba_lan_allow] - Enter Enable or Disable.
[tr069_lan_allow
tr069_lan_allow]
Enable or disable the permission of TR069 access.
[tr069_lan_allow]- Enter Enable or Disable.
[lan_ping_allow
lan_ping_allow]
Enable or disable the function of Allow ping from the LAN.
[lan_ping_allow] – Enter Enable or Disable.
[web_port
Specify a number as web service port.
Vigor2960 Series User’s Guide
651
web_port]
[web_port] – Enter a number. (The default value is 80)
[telnet_port
telnet_port]
Specify a number as telnet service port.
[telnet_port] – Enter a number. (The default value is 23)
[ssh_port ssh_port]
Specify a number as SSH service port.
[ssh_port] - Enter a number. (The default value is 22)
[https_port
https_port]
Specify a number as HTTPS service port.
[https_port] - Enter a number. (The default value is 443)
[sslproxy_port
sslproxy_port]
Specify a number as SSL Proxy service port.
[sslproxy_port] –Enter a number. (The default value is 44300)
[sslvpn_ports
slvpn_port]
Specify a number as SSL VPN port.
[slvpn_port] - Enter a number. (The default value is 443)
[ftp_port ftp_port]
Specify a number as FTP service port.
[ftp_port] - Enter a number. (The default value is 21)
[mngt_wan
mngt_wan]
Specify a WAN profile for accessing Vigor router.
[mngt_wan] – Enter the name of WAN proifle.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure system#acc_ctrl set web_allow enable
set done
Vigor2960@config-sys# acc_ctrl get
disable_auto_logout : disable
validation_code : Enable
fail_times : 2
upload_login_image_status : disable
upload_login_image :
enforce_https : disable
wan_access_control : Internet Access Control
apply_to_wan_interface : wan1, wan2, wan3, wan4, wan5, usb1, usb2
web_allow : Disable
telnet_allow : Disable
ssh_allow : Disable
https_allow : Disable
sslproxy_allow : disable
ftp_allow : Disable
samba_allow : Disable
.
.
.
Vigor2960 Series User’s Guide
652
6
6
.
.
1
1
2
2
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
a
a
d
d
m
m
i
i
n
n
_
_
p
p
a
a
s
s
s
s
w
w
d
d
Users could use the [admin_passwd] command to configure administrator password by
entering new password, and confirm password.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-sys# admin_passwd
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure system#
Vigor2960@config-sys# admin_passwd
Vigor2960@config-sys# admin_passwd
Changing password for admin
New password:
Bad password: similar to username
Retype password:
Password for admin changed by root
Vigor2960@config-sys#
6
6
.
.
1
1
2
2
.
.
3
3
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
a
a
u
u
t
t
o
o
d
d
i
i
s
s
c
c
o
o
v
v
e
e
r
r
y
y
Users could use the [autodiscovery] command to enable auto discovery mode.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-sys# autodiscovery get
Vigor2960@config-sys# autodiscovery set [mode mode]
Command Description
get
Get the configuration of auto discovery mode.
set
Configure settings for auto discovery mode.
[mode mode]
Enable / disable the function of auto discovery mode.
[mode] - Enter Enable or Disable.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure system#
Vigor2960@config-sys#
Vigor2960@config-sys# autodiscovery set mode enable
set done
Vigor2960@config-sys# autodiscovery get
mode : Enable
Vigor2960@config-sys#
6
6
.
.
1
1
2
2
.
.
4
4
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
c
c
c
c
Users could use the [cc] command to configure country code settings.
Vigor2960 Series User’s Guide
653
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-sys# cc get
Vigor2960@config-sys# cc set [value]
Command Description
get
Get the configuration of country code.
set
Configure settings for country code.
[value]
Enter the number which can represent a country.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure system#
Vigor2960@config-sys#
Vigor2960@config-sys# cc set 23
Set country code success.
Vigor2960@config-sys# cc get
Country code=23
6
6
.
.
1
1
2
2
.
.
5
5
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
c
c
m
m
m
m
Users can use the [cmm] command to configure Connect to Fast Forward Conntrack; then
the screen will Entering character mode.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-sys# cmm
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure system#
Vigor2960@config-sys#
Vigor2960@config-sys# cmm
Entering character mode
Escape character is '^]'.
Welcome to the Fast Forward Contrack module monitor CLI
cmm> ?
help Show available commands
quit Disconnect
logout Disconnect
exit Exit from current mode
history Show a list of previously run commands
enable Turn on privileged commands
show
query
set
ipv4
ipv6
prf
Vigor2960 Series User’s Guide
654
mspmem
vlan
gre GRE settings
6
6
.
.
1
1
2
2
.
.
6
6
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
c
c
o
o
n
n
f
f
i
i
g
g
Users could use [config] command to configure Configuration Backup.
6
6
.
.
1
1
2
2
.
.
6
6
.
.
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
a
a
u
u
t
t
o
o
m
m
a
a
t
t
i
i
c
c
g
g
e
e
t
t
,
,
a
a
u
u
t
t
o
o
m
m
a
a
t
t
i
i
c
c
s
s
e
e
t
t
It is used for reviewing the detailed settings or modifying settings for automatic backup
configuration.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-sys# config automatic get
Vigor2960@config-sys# config automatic set [status status] [interval
interval] [date_day date_day] [date_weekday date_weekday] [date_time
date_time] [only_change only_change]
Command Description
get
Get the configuration of automatic backup configuration.
set
Modify settings for automatic backup configuration.
[status status]
Enable / disable the function of automatic backup configuration.
[status] – Enter Enable or Disable.
[interval interval]
Specify an interval for automatic backup.
[interval]- Available settings include:
Daily
Weekly
Monthly
[date_day
date_day]
Specify a date.
[date_day] – Enter 1 to 31 to reprensent different date in a month.
[date_weekday
date_weekday]
Specify which day (in one week) to perform the automatic
backup.
[date_weekday] – Available settings include:
Mon
Tue
Wed
Thu
Fri
Sat
Sun
[date_time
date_time]
Specify the backup time in a day.
[date_time] – Enter the hour and the minute (e.g., 00:00)
[only_change
only_change]
Enable / disable the function of Only backup when config
changed.
[only_change] – Enter Enable or Disable.
Vigor2960 Series User’s Guide
655
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure system#
Vigor2960@config-sys#
Vigor2960@config-sys# config automatic set date_time 01:01
only_change enable
set done
Vigor2960@config-sys# config automatic set status enable
Vigor2960@config-sys# config automatic get
status : Enable
interval : Weekly
date_day : 1
date_weekday : Sun
date_time : 01:01
only_change : Enable
cfg_files : backup-20110102-080509-1.4.0_Beta,
backup-20110102-080858-1.4.0_Beta
Vigor2960@config-sys#
6
6
.
.
1
1
2
2
.
.
6
6
.
.
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
b
b
a
a
c
c
k
k
u
u
p
p
It is used for backup configuration to remote TFTP server.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-sys# config backup [serverip][filename]
Command Description
[serverip]
Specify the IP address of TFTP server.
[serverip] – Enter the IP address (e.g., 192.168.1.130) of TFTP
server.
[filename]
Specify the filename on server (e.g., cfg.tar.gz).
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure system#
Vigor2960@config-sys#
Vigor2960@config-sys# config backup 192.168.1.130 cfg.tar.gz
Configuration backup... tar: removing leading '/' from member names
done
Vigor2960@config-sys#
6
6
.
.
1
1
2
2
.
.
6
6
.
.
3
3
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
d
d
e
e
f
f
a
a
u
u
l
l
t
t
_
_
s
s
e
e
t
t
It is used for customizing default configuration.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-sys# config default_set enable [filename]
Vigor2960@config-sys# config default_set disable
Vigor2960@config-sys# config default_set get
Vigor2960 Series User’s Guide
656
Command Description
default_set enable
[filename]
Enable the function of customized default configuration.
[filename] – Enter the name of configuration backup file (created
by using config local backup, refer to 6.12.6.4).
default_set disable
Disable the function of customized default configuration.
default_set get
Get the information for customized default configuration.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure system#
Vigor2960@config-sys# config default_set
Vigor2960@config-sys# config default_set enable
backup-20171208-173919-1.4.0_Beta
Vigor2960@config-sys#
Vigor2960@config-sys# config default_set get
Customized default configuration enabled. configuration name:
Name: backup-20171208-173919-1.4.0_Beta
Model: Vigor2960
Created time: 2017-12-08 17:39:19
Firmware version: 1.4.0_Beta
Comment: test_for_carrie
Vigor2960@config-sys#
6
6
.
.
1
1
2
2
.
.
6
6
.
.
4
4
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
l
l
o
o
c
c
a
a
l
l
It is used for creating or deleting configuration backup file in local storage. Before using the
commands of “backup”, “restore” or “default_set”, perform such command first.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-sys# config local backup [comment]
Vigor2960@config-sys# config local delete [conf_name]
Vigor2960@config-sys# config local download [serverip][filename]
Vigor2960@config-sys# config local list
Vigor2960@config-sys# config local restore [filename]
Vigor2960@config-sys# config local upload [serverip] [filename]
Command Description
backup [comment]
[comment] – Enter a name for configuration backup.
delete [conf_name]
Delete backup configuration file in local storage.
[conf_name] – Enter the name of backup configuration file.
download [serverip]
[filename]
Download backup configuration file from local storage to TFTP
server.
[serverip] – Enter the IP address (e.g., 192.168.1.130) of TFTP
server for storing the configuration file.
[filename] – Enter the name (e.g., e.g.,
backup-20180105-150537-1.4.0_Beta) of the backup
configuration file.
list
Display the backup configuration with detailed settings.
Vigor2960 Series User’s Guide
657
restore [filename]
Restore backup configuration from the local storage.
[filename] – Enter the name (e.g.,
backup-20180105-150537-1.4.0_Beta) of the backup
configuration file.
Upload [serverip]
[filename]
Upload backup configuration file from TFTP server to local
storage.
[serverip] – Enter the IP address (e.g., 192.168.1.130) of TFTP
server for storing the configuration file.
[filename] – Enter the name of the backup configuration file (e.g.,
backup-20180105-150537-1.4.0_Beta).
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure system#
Vigor2960@config-sys# config local backup test_for_carrie
Starting backup ...
Backup created.
Vigor2960@config-sys#
Vigor2960@config-sys# config local list
Total 1 backup configuration(s).
List of local backup configuration(s):
Name: backup-20171208-173919-1.4.0_Beta
Model: Vigor2960
Created time: 2017-12-08 17:39:19
Firmware version: 1.4.0_Beta
Comment: test_for_carrie
Vigor2960@config-sys#config local download 192.168.1.130
backup-20110102-080858-1.4.0_Beta
download
Vigor2960@config-sys#config local restore
backup-20180105-150537-1.4.0_Beta
Start restoring configuration ...
Restore OK ,reboot
Vigor2960@config-sys#
遺失與主機的連線。
6
6
.
.
1
1
2
2
.
.
6
6
.
.
5
5
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
r
r
e
e
s
s
t
t
o
o
r
r
e
e
It is used for restoring configuration from remote TFTP server.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-sys# config restore [serverip][filename]
Command Description
[serverip][filename]
[serverip] – Enter the IP address (e.g, 192.168.1.130) of TFTP
server.
[filename] – Enter the name of TFTP server (e.g., cfg.tar.gz).
Vigor2960 Series User’s Guide
658
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure system#
Vigor2960@config-sys# config restore
Vigor2960@config-sys# config restore 192.168.1.130 cfg.tar.gz
Configuration restore... tar: removing leading '/' from member names
etc/persistence/config/
etc/persistence/config/vs
etc/persistence/config/dmz
etc/persistence/config/lpd
etc/persistence/config/nat
etc/persistence/config/qos
etc/persistence/config/rrd
etc/persistence/config/swm
…….
etc/persistence/data/ipsec.d/private/private_key_Local_CA.pem
cp: cannot stat '/tmp/config': No such file or directory
rm: cannot remove '/tmp/config': No such file or directory
done
Vigor2960@config-sys#
6
6
.
.
1
1
2
2
.
.
7
7
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
f
f
i
i
r
r
m
m
w
w
a
a
r
r
e
e
Users could use [firmware] command to perform firmware upgrade.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-sys# firmware upgrade [serverip] [filename] [default]
Command Description
[serverip]
[serverip] – Enter the IP address of TFTP server.
[filename]
[filename] – Enter the name of the firmware (e.g., V3K9.all) of
Vigor router stored in TFTP server. Such file shall be stored in the
database of Vigor router beforehand.
[default]
Reboot Vigor router with default setting.
[default] – Enter “true” or “false”.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960# configure system#
Vigor2960@config-sys# firmware upgrade
Vigor2960@config-sys# firmware upgrade 192.168.1.130 V3K9.all
Firmware Update: Downloading image file from server.
Firmware Update: Download OK
Firmware Update: Checking if the firmware is valid
Firmware Update: Checksum passed. from tmp
Firmware Update: Shutting down applications
Firmware Update: Writing image to flash. Do not turn off or reboot the
machine. from
Vigor2960 Series User’s Guide
659
Firmware Update: Upgrade success. from
Firmware Update: Rebooting...
6
6
.
.
1
1
2
2
.
.
8
8
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
m
m
a
a
i
i
l
l
a
a
l
l
e
e
r
r
t
t
Users could use [mailalert] command to configure Mail Alert settings and use the [get], [set],
[mailto] command to configure the details information.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-sys# mailalert get
Vigor2960@config-sys# mailalert set [status status] [mailfrom mailfrom]
[smtpserver smtpserver] [smtpport smtpport] [ssl_tls ssl_tls]
[user_login user_login] [user_name user_name] [user_password
user_password] [usermail usermail] [vpnmail vpnmail]
Vigor2960@config-sys# mailalert mailto add <member>
Vigor2960@config-sys# mailalert mailto remove <member>
Command Description
get
Get the configuration of mail alert configuration.
set
Modify settings for mail alert configuration.
[status status]
Enable / disable the function of Mail Alert.
[status] – Enter Enable or Disable.
[mailfrom
mailfrom]
Specify an e-mail address of sender.
[mailfrom] – Enter the e-mail address.
[smtpserver
smtpserver]
Specify an IP address for SMTP server.
[smtpserver] – Enter the IP address.
[smtpport
smtpport]
Specify a port number for SMTP server.
[smtpport] – Enter a number (ranging from 1 ~ 65535).
[ssl_tls ssl_tls]
Specify communications privacy over the Internet.
[ssl_tls] – Available settings include:
Disable
StartTLS
SSL
TLS
[user_login
user_login
Enable / disable the function of login by SMTP server.
[user_login] - Enter Enable or Disable.
[user_name
user_name]
Specify a login name for SMTP server.
[user_name] – Enter a string as login name.
[user_password
user_password]
Specify a password for SMTP server.
[user_password] – Enter a string as password.
[usermail usermail]
Enable / disable the function of User Access Mail Alert.
[usermail] - Enter Enable or Disable.
[vpnmail vpnmail]
Enable / disable the function of VPN Mail Alert.
[vpnmail] – Enter Enable or Disable.
Vigor2960 Series User’s Guide
660
mailto add
<member>
Add a destination e-mail address.
<member> - Enter an e-mail address.
mailto remove
<member>
Remove an existed e-mail address.
<member> - Enter an e-mail address.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Entering enable mode...
Vigor2960# configure system
Vigor2960@config-sys# mailalert get
status : Disable
mailfrom :
mailto :
smtpserver :
smtpport : 25
ssl_tls : disable
user_login : Disable
user_name :
usermail : enable
vpnmail : Disable
Vigor2960@config-sys# mailalert set status enable vpnmail enable
set done
Vigor2960@config-sys#
6
6
.
.
1
1
2
2
.
.
9
9
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
n
n
t
t
p
p
c
c
l
l
i
i
e
e
n
n
t
t
It is used for configuring time and date of Vigor router.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-sys# ntpclient get
Vigor2960@config-sys# ntpclient set [status status] [server server]
[port port] [interval interval] [zone zone] [daylight daylight]
Vigor2960@config-sys# ntpclient manual <date>
Command Description
get
Get the time configuration.
set
Modify the time settings.
[status status]
Specify which time type will be used.
[status] – Enter NTP or Browser.
[server server]
Specify the IP address / domain name of NTP server.
[server]- Enter the IP address or the domain name.
[port port]
Specify a port number for NTP server.
[port] – Enter a port number.
[interval interval]
Specify the request interval.
Vigor2960 Series User’s Guide
661
[interval] - Enter
[zone zone]
Specify the time zone for Vigor router.
[zone] – Available settings include:
Eniwetok/MidwayIslands/Samoa/Hawaii/Alaska/PacificTime/Tiju
ana/Arizona/MountainTime/CentralTime/MexicoCity/Saskatchew
an/Tegucigalpa/Bogota/EasternTime/Indiana/Lima/Quito/Caracas/
AtlanticTime/Georgetown/LaPaz/Santiago/Newfoundland/Brasilia
/BuenosAires/Mid-Atlantic/Azores/Casablanca/Greenwich/Lisbon
/London/Monrovia/Amsterdam/Belgrade/Berlin/Bern/Bratislava/B
russels/Budapest/Copenhagen/Edinburgh/Ljubljana/Madrid/Oslo/
Paris/Prague/Rome/Sarajevo/Skopje/Stockholm/Vienna/Warsaw/
Zagreb/Windhoek/Athens/Bucharest/Cairo/Harare/Helsinki/Istanb
ul/Jerusalem/Pretoria/Riga/Sofia/Tallinn/Vilnius/Baghdad/Kuwait
/Moscow/Nairobi/Riyadh/Tehran/AbuDhabi/Baku/Muscat/SaintPe
tersburg/Tbilisi/Volgograd/Kabul/Ekaterinburg/Islamabad/Karach
i/Mumbai/Kolkata/Colombo/Madras/NewDelhi/Kathmandu/Alma
ty/Astana/Dhaka/Rangoon/Bangkok/Hanoi/Jakarta/Beijing/Chong
qing/HongKong/Perth/Singapore/Taipei/Urumqi/Osaka/Sapporo/S
eoul/Tokyo/Yakutsk/Adelaide/Darwin/Brisbane/Canberra/Guam/
Hobart/Magadan/Melbourne/PortMoresby/Sydney/Vladivostok/N
ewCaledonia/SolomonIslands/Auckland/Fiji/Kamchatka/Kwajalei
n/MarshallIslands/Wellington
[daylight daylight]
Enable / disable the function of daylight saving.
[daylight] – Enter Enable or Disable.
manual <date>
Manually set current time and date.
<date> - Enter the date and time with the format of
“MMDDhhmmYYYY” (e.g., manual 120812102017).
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960@config-sys# ntpclient get
Current System Time :
status : NTP
server : pool.ntp.org
port : 123
interval : 600
zone : Taipei
daylight : Disable
Vigor2960@config-sys# ntpclient set status Browser
set done
Vigor2960@config-sys# ntpclient manual 120812102017
Vigor2960@config-sys# ntpclient get
Current System Time :
status : Browser
server : pool.ntp.org
port : 123
interval : 600
zone : Taipei
daylight : Disable
Vigor2960 Series User’s Guide
662
Vigor2960@config-sys#
6
6
.
.
1
1
2
2
.
.
1
1
0
0
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
r
r
e
e
b
b
o
o
o
o
t
t
Users can use the [reboot] command to reboot Vigor router and type the [reboot default]
command to reboot with factory by default.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-sys# reboot
Vigor2960@config-sys# reboot default
6
6
.
.
1
1
2
2
.
.
1
1
1
1
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
n
n
m
m
p
p
a
a
g
g
e
e
n
n
t
t
Users can use the [snmpagent] command to configure SNMP and then use the [get], [set]
command to configure the the details information.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-sys# snmpagent get
Vigor2960@config-sys# snmpagent set [status status] [getcommunity
getcommunity] [setcommunity setcommunity] [dfl dfl_host] [mgnip mgnip]
[notification_host notification_host] [snmpv3_status snmpv3_status]
[usm usm] [auth auth_algorithm] [auth_password auth_password] [privacy
privacy_algorithm] [privacy_password privacy_password]
Command Description
get
Get the configuration of SNMP agent.
set
Modify the settings of SNMP agent.
[status status]
Enable / disable the function of SNMP.
[status] – Enter Enable or Disable.
[getcommunity
getcommunity]
Set the get community.
[getcommunity] – Enter a string. The default is “public”.
[setcommunity
setcommunity]
Set the set community.
[setcommunity] – Enter a string. The default is “private”.
[dfl dfl_host]
Enable / disable the function of Default Host IP/Mask.
[dfl_host] - Enter Enable or Disable.
[mgnip mgnip]
Set an IP range to manage.
[mgnip]- Enter an IP address with subnet mask (e.g.,
192.168.1.1/24).
[notification_host
notification_host]
Specify an IP address for notification host.
[notification_host] – Enter an IP address.
[snmpv3_status
snmpv3_status]
Enable / disable the SNMPV3 agent.
[snmpv3_status] - Enter Enable or Disable.
[usm usm]
It means “user-based security mode”.
[usm]- Enter a user name which will be used for authentication.
The maximum length of the text is limited to 23 characters.
[auth
Specify the authentication algorithm.
Vigor2960 Series User’s Guide
663
auth_algorithm]
[auth_algorithm] – Available settings include:
No_Auth
MD5
SHA
[auth_password
auth_password]
Set a password for authentication.
[auth_password] – Enter a string as password.
[privacy
privacy_algorithm]
Specify the privacy algorithm.
[privacy_algorithm] – Available settings include:
No_Priv
DES
AES
[privacy_password
privacy_password]
Set a password for privacy.
[privacy_password] – Enter a string as password.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960@config-sys# snmpagent get
status : Disable
getcommunity : public
setcommunity : private
dfl : enable
mgnip : default
notification_host : 0.0.0.0
snmpv3_status : Disable
usm :
auth : No_Auth
auth_password :
privacy : No_Priv
privacy_password :
6
6
.
.
1
1
2
2
.
.
1
1
2
2
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
s
s
y
y
s
s
l
l
o
o
g
g
d
d
Users can use the [syslogd] command to configure syslog and use [get] or [set] command to
configure the details information.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-sys# syslogd get
Vigor2960@config-sys# syslogd set [status status] [ip remotehost] [port
remoteport] [log_to_usb log_to_usb] [reposit_days reposit_days]
[routername routername] [firewall firewall] [vpn vpn] [useraccess
useraccess] [ua_high_priority ua_high_priority] [wan wanlog] [others
others]
Command Description
get
Get the configuration of SNMP agent.
set
Modify the settings of SNMP agent.
[status status]
Specify a method to determine current status for Syslog access.
Vigor2960 Series User’s Guide
664
[status] – Available settings include:
Disable
Remote
Local
Both
[ip remotehost]
Such option is available when Remote / Both is selected in Status.
Set the IP address of host name of Syslog server.
[remotehost] – Enter the IP address or host name.
[port remoteport]
Set the port number for the Syslog server. Such option is available
when Remote / Both is selected in Status.
[remoteport] – Enter a port number.
[log_to_usb
log_to_usb]
Enable / disable the function of storing syslog in USB disk.
[log_to_usb] – Enter Enable or Disable.
[reposit_days
reposit_days]
Specify the period of keeping record of Syslog in USB.
[reposit_days]- Enter a number (ranging from 1 to 9999).
[routername
routername]
Set a name for such router.
[routername] – Enter a string.
[firewall firewall]
Enable / disable the function of recording Firewall log onto
Syslog.
[firewall] – Enter Enable or Disable.
[vpn vpn]
Enable / disable the function of recording VPN log onto Syslog.
[vpn] – Enter Enable or Disable.
[useraccess
useraccess]
Enable / disable the function of recording user access log onto
Syslog.
[useraccess] – Enter Enable or Disable.
[ua_high_priority
ua_high_priority]
Enable / disable the function of User Access Log High Priority
which can reduce the loss of user access log.
[ua_high_priority] – Enter Enable or Disable.
[wan wanlog]
Enable / disable the function of recording WAN log onto Syslog.
[wanlog] – Enter Enable or Disable.
[others others]
Enable / disable the function of recording all other log onto
Syslog.
[others] – Enter Enable or Disable.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960@config-sys# syslogd set reposit_days 6 vpn disable
set done
Vigor2960@config-sys# syslogd get
status : Local
ip : 127.0.0.1
port : 514
Vigor2960 Series User’s Guide
665
log_to_usb : Disable
reposit_days : 6
routername : Vigor
firewall : Enable
vpn : Disable
useraccess : Disable
ua_high_priority : Disable
wan : Enable
others : Enable
6
6
.
.
1
1
2
2
.
.
1
1
3
3
T
T
e
e
l
l
n
n
e
e
t
t
C
C
o
o
m
m
m
m
a
a
n
n
d
d
:
:
t
t
r
r
0
0
6
6
9
9
Users can use the [tr069] command to configure TR-069 settings and use [get] or [set]
command to configure the details information.
S
S
y
y
n
n
t
t
a
a
x
x
Vigor2960@config-sys# tr069 get
Vigor2960@config-sys# tr069 set [status status] [wan_profile
wan_profile] [wan_failover wan_failover][acs_server acs_server]
[acs_username acs_username] [acs_password acs_password][cpe_proto
cpe_proto] [port port] [cpe_username cpe_username] [cpe_password
cpe_password] [tr069_log tr069_log] [period_status period_status]
[period period] [stun_status stun_status] [stun_host stun_ip]
[stun_port stun_port] [stun_min_period stun_min_keepalive]
[stun_max_period stun_max_keepalive]
Command Description
get
Get the configuration of SNMP agent.
set
Modify the settings of SNMP agent.
[status status]
Enable / disable the configuration of TR-069.
[status] – Enter Enable or Disable.
[wan_profile
wan_profile]
Specify WAN/LAN profile to be recognized by VigorACS.
[wan_profile] – Enter the name of WAN interface (e.g., wan1).
[wan_failover
wan_failover]
Specify the WAN interface to take over the job of network
connection when the original WAN interface fails.
[wan_failover] – Enter the name of WAN/USB WAN interface
(e.g., wan2).
[acs_server
acs_server]
Specify the IP address of VigorACS server.
[acs_server] – Enter the IP address.
[acs_username
acs_username]
Specify a username for VigorACS server.
[acs_username] – Enter a string.
[acs_password
acs_password]
Specify a password for VigorACS server.
[acs_password] – Enter a string.
[cpe_proto
cpe_proto]
Specify CPE protocol.
[cpe_proto] – Available settings include:
http
https
Vigor2960 Series User’s Guide
666
[port port]
Specify a port number for Vigor router.
[port] – Enter a port number (ranging from 0 – 65535).
[cpe_username
cpe_username]
Specify user name for the CPE which will be used by the
administrator of VigorACS to log into the WUI of Vigor2960.
[cpe_username] – Enter a string as username.
[cpe_password
cpe_password]
Specify password for the CPE which will be used by the
administrator of VigorACS to log into the WUI of Vigor2960.
[cpe_password] – Enter a string as password.
[tr069_log
tr069_log]
Record log related to TR-069 configuration.
[tr069_log] – Enter Enable or Disable.
[period_status
period_status]
Enable / disable the function of Periodic Status.
[period_status] – Enter Enable or Disable.
[period period]
Specify a time period as Periodic Time.
[period] – Enter a number (ranging from 60 ~ 86400). Unit is
second.
[stun_status
stun_status]
Enable / disable the STUN server.
[stun_status] – Enter Enable or Disable.
[stun_host stun_ip]
Specify the IP address of STUN server.
[stun_ip]- Enter the IP address.
[stun_port
stun_port]
Specify a port number for STUN server.
[stun_port] – Enter a port number (ranging from 1 – 65535).
[stun_min_period
stun_min_keepalive
]
If STUN server is enabled, specify a time period (minimum) for
maintaining the binding in the Gateway. The default setting is “60
seconds”.
[stun_min_keepalive] – Enter a number (ranging from 60 ~
86400). Unit is second.
[stun_max_period
stun_max_keepalive
]
If STUN server is enabled, specify a time period (maximum) for
maintaining the binding in the Gateway. A value of “-1” indicates
that no maximum period is specified.
[stun_max_keepalive] – Enter a number (ranging from 60 ~
86400). Unit is second.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
Vigor2960>enable
Vigor2960@config-sys# tr069 set status enable wan_failover wan2
tr069_log enable period 1000
set done
Vigor2960@config-sys# tr069 get
status : Enable
wan_profile : wan1
wan_failover : wan2
acs_server :
acs_username : acs
acs_password : **********
cpe_time :
Vigor2960 Series User’s Guide
667
connect_acs_status : OFF
cpe_proto : http
port : 8069
cpe_url : http://:8069/cwmp/creq
cpe_username : vigor
cpe_password : **********
tr069_log : Enable
period_status : Enable
period : 1000
stun_status : Disable
stun_host : 0.0.0.0
stun_port : 3478
stun_min_period : 60
stun_max_period : 90
… 655 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Draytek Vigor 2960 series bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Draytek Vigor 2960 series in de taal/talen: Engels als bijlage per email.

De handleiding is 10,87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info