502869

Draytek VIGOR 2130 Handleiding

16
Verklein
Vergroot
Pagina terug
1/241
Pagina verder
Vigor2130 Series User’s Guide
ii
Vigor2130 Series
High Speed Gigabit Router
User’s Guide
Version: 1.2
Firmware Version: V1.3.0.1
Date: 29/04/2010
Vigor2130 Series User’s Guide
iii
Copyright Information
Copyright
Declarations
Copyright 2010 All rights reserved. This publication contains information that is
protected by copyright. No part may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language without written permission from the
copyright holders.
Trademarks
The following trademarks are used in this document:
z Microsoft is a registered trademark of Microsoft Corp.
z Windows, Windows 95, 98, Me, NT, 2000, XP, Vista and Explorer are
trademarks of Microsoft Corp.
z Apple and Mac OS are registered trademarks of Apple Inc.
z Other products may be trademarks or registered trademarks of their respective
manufacturers.
Safety Instructions and Approval
Safety
Instructions
z Read the installation guide thoroughly before you set up the router.
z The router is a complicated electronic unit that may be repaired only be
authorized and qualified personnel. Do not try to open or repair the router
yourself.
z Do not place the router in a damp or humid place, e.g. a bathroom.
z The router should be used in a sheltered area, within a temperature range of +5 to
+40 Celsius.
z Do not expose the router to direct sunlight or other heat sources. The housing and
electronic components may be damaged by direct sunlight or heat sources.
z Do not deploy the cable for LAN connection outdoor to prevent electronic shock
hazards.
z Keep the package out of reach of children.
z When you want to dispose of the router, please follow local regulations on
conservation of the environment.
Warranty
We warrant to the original end user (purchaser) that the router will be free from any
defects in workmanship or materials for a period of two (2) years from the date of
purchase from the dealer. Please keep your purchase receipt in a safe place as it serves
as proof of date of purchase. During the warranty period, and upon proof of purchase,
should the product have indications of failure due to faulty workmanship and/or
materials, we will, at our discretion, repair or replace the defective products or
components, without charge for either parts or labor, to whatever extent we deem
necessary tore-store the product to proper operating condition. Any replacement will
consist of a new or re-manufactured functionally equivalent product of equal value, and
will be offered solely at our discretion. This warranty will not apply if the product is
modified, misused, tampered with, damaged by an act of God, or subjected to abnormal
working conditions. The warranty does not cover the bundled or licensed software of
other vendors. Defects which do not significantly affect the usability of the product will
not be covered by the warranty. We reserve the right to revise the manual and online
documentation and to make changes from time to time in the contents hereof without
obligation to notify any person of such revision or changes.
Be a Registered
Owner
Web registration is preferred. You can register your Vigor router via
http://www.draytek.com.
Firmware & Tools
Updates
Due to the continuous evolution of DrayTek technology, all routers will be regularly
upgraded. Please consult the DrayTek web site for more information on newest
firmware, tools and documents.
http://www.draytek.com
Vigor2130 Series User’s Guide
iv
European Community Declarations
Manufacturer: DrayTek Corp.
Address: No. 26, Fu Shing Road, HuKou County, HsinChu Industrial Park, Hsin-Chu, Taiwan 303
Product: Vigor2130 Series Router
DrayTek Corp. declares that Vigor2130 Series of routers are in compliance with the following essential
requirements and other relevant provisions of R&TTE Directive 1999/5/EEC.
The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive 2004/108/EC by
complying with the requirements set forth in EN55022/Class B and EN55024/Class B.
The product conforms to the requirements of Low Voltage (LVD) Directive 2006/95/EC by complying with the
requirements set forth in EN60950-1.
Regulatory Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the use is encouraged to try to correct the interference by one of the following measures:
z Reorient or relocate the receiving antenna.
z Increase the separation between the equipment and receiver.
z Connect the equipment into an outlet on a circuit different form that to which the receiver is connected.
z Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device may accept any interference received, including interference that may cause undesired operation.
Please visit http://www.draytek.com/user/AboutRegulatory.php
This product is designed for 2.4GHz WLAN network throughout the EC region and Switzerland with restrictions
in France. Please see the user manual for the applicable networks on your product.
Vigor2130 Series User’s Guide
v
T
T
a
a
b
b
l
l
e
e
o
o
f
f
C
C
o
o
n
n
t
t
e
e
n
n
t
t
s
s
1
Preface ...............................................................................................................1
1.1 Web Configuration Buttons Explanation ................................................................................. 1
1.2 LED Indicators and Connectors.............................................................................................. 2
1.2.1 For Vigor2130................................................................................................................... 2
1.2.2 For Vigor2130n................................................................................................................. 4
1.2.3 For Vigor2130Vn............................................................................................................... 6
1.3 Hardware Installation .............................................................................................................. 8
Stand Installation ....................................................................................................................... 9
1.4 Printer Installation ................................................................................................................. 10
2
Configuring Basic Settings ............................................................................15
2.1 Two-Level Management........................................................................................................15
2.2 Accessing Web Page ............................................................................................................ 15
2.3 Changing Password.............................................................................................................. 16
2.4 Quick Start Wizard ................................................................................................................ 18
2.4.1 Setting up the Password................................................................................................. 18
2.4.2 Setting up the Time Zone ............................................................................................... 19
2.4.3 Setting up the Internet Connection................................................................................. 19
2.4.4 Setting up the Wireless Connection ............................................................................... 24
2.4.5 Saving the Wizard Configuration.................................................................................... 29
2.5 Online Status......................................................................................................................... 29
2.6 Saving Configuration............................................................................................................. 30
3
User Mode Operation............................................................................................31
3.1 WAN...................................................................................................................................... 31
3.1.1 Internet Access............................................................................................................... 33
3.1.2 Ports................................................................................................................................ 39
3.1.3 3G Backup...................................................................................................................... 40
3.2 LAN ....................................................................................................................................... 41
3.2.1 General Setup................................................................................................................. 44
3.2.2 Ports................................................................................................................................ 45
3.2.3 MAC Address Table........................................................................................................ 47
3.2.4 VLAN............................................................................................................................... 48
3.2.5 Monitor Port .................................................................................................................... 49
3.2.6 Static Route .................................................................................................................... 50
3.2.7 Bind IP to MAC ............................................................................................................... 51
3.3 NAT ....................................................................................................................................... 53
3.3.1 Hardware NAT................................................................................................................ 53
Vigor2130 Series User’s Guide
vi
3.3.2 Open Ports...................................................................................................................... 54
3.3.3 DMZ Host........................................................................................................................ 55
3.4 Bandwidth Management ....................................................................................................... 56
3.4.1 Session Limit .................................................................................................................. 56
3.4.2 Bandwidth Limit .............................................................................................................. 57
3.4.3 Port Rate Control............................................................................................................ 59
3.4.4 QoS Control List ............................................................................................................. 59
3.4.5 Ports Priority ................................................................................................................... 64
3.4.6 QoS Statistics ................................................................................................................. 65
3.5 Applications........................................................................................................................... 67
3.5.1 Dynamic DNS ................................................................................................................. 67
3.5.2 Schedule......................................................................................................................... 68
3.5.3 IGMP Snooping .............................................................................................................. 70
3.5.4 IGMP Status ................................................................................................................... 70
3.5.5 UPnP Configuration........................................................................................................71
3.5.6 Wake On LAN................................................................................................................. 72
3.6 Wireless LAN ........................................................................................................................ 73
3.6.1 Basic Concepts............................................................................................................... 73
3.6.2 General Setup................................................................................................................. 75
3.6.3 Access Control................................................................................................................ 80
3.6.4 Station List...................................................................................................................... 81
3.6.5 Access Point Discovery .................................................................................................. 82
3.7 USB Application .................................................................................................................... 82
3.7.1 USB General Settings..................................................................................................... 82
3.7.2 FTP User Management .................................................................................................. 83
3.7.3 Disk Status...................................................................................................................... 84
3.7.4 Disk Shares .................................................................................................................... 84
3.8 IPv6 ....................................................................................................................................... 86
3.8.1 IPv6 WAN Setup............................................................................................................. 86
3.8.2 IPv6 LAN Setup .............................................................................................................. 90
3.8.3 IPv6 Firewall Setup......................................................................................................... 91
3.8.4 IPv6 Routing ................................................................................................................... 93
3.8.5 IPv6 Neighbour............................................................................................................... 94
3.8.6 IPv6 TSPC Status........................................................................................................... 94
3.9 User....................................................................................................................................... 97
3.9.1 User Configuration.......................................................................................................... 97
3.10 System Maintenance........................................................................................................... 98
3.10.1 System Status............................................................................................................... 98
3.10.2 TR069......................................................................................................................... 100
3.10.3 User Password ........................................................................................................... 101
3.10.4 Configuration Backup ................................................................................................. 102
3.10.5 Syslog / Mail Alert....................................................................................................... 104
3.10.6 Time and Date ............................................................................................................ 106
3.10.7 Management............................................................................................................... 107
3.10.8 Reboot System ........................................................................................................... 108
3.10.9 Firmware Upgrade...................................................................................................... 108
4
Admin Mode Operation.......................................................................................109
4.1 WAN.................................................................................................................................... 109
Vigor2130 Series User’s Guide
vii
4.1.1 Internet Access............................................................................................................. 111
4.1.2 Ports.............................................................................................................................. 117
4.1.3 3G Backup.................................................................................................................... 118
4.2 LAN ..................................................................................................................................... 120
4.2.1 General Setup............................................................................................................... 122
4.2.2 Ports.............................................................................................................................. 123
4.2.3 MAC Address Table...................................................................................................... 125
4.2.4 VLAN............................................................................................................................. 126
4.2.5 Monitor Port .................................................................................................................. 127
4.2.6 Static Route .................................................................................................................. 127
4.2.7 Bind IP to MAC ............................................................................................................. 129
4.3 NAT ..................................................................................................................................... 130
4.3.1 Hardware NAT.............................................................................................................. 131
4.3.2 Open Ports.................................................................................................................... 131
4.3.3 DMZ Host...................................................................................................................... 133
4.4 Firewall................................................................................................................................ 134
4.4.1 DoS Defense ................................................................................................................ 134
4.4.2 Ports Configuration....................................................................................................... 135
4.4.3 Access Control List....................................................................................................... 137
4.5 Bandwidth Management ..................................................................................................... 149
4.5.1 Session Limit ................................................................................................................ 149
4.5.2 Bandwidth Limit ............................................................................................................ 150
4.5.3 Port Rate Control.......................................................................................................... 152
4.5.4 QoS Control List ........................................................................................................... 152
4.5.5 Ports Priority ................................................................................................................. 157
4.5.6 QoS Statistics ............................................................................................................... 158
4.6 Applications......................................................................................................................... 160
4.6.1 Dynamic DNS ............................................................................................................... 160
4.6.2 Schedule....................................................................................................................... 161
4.6.3 IGMP Snooping ............................................................................................................ 163
4.6.4 IGMP Status ................................................................................................................. 163
4.6.5 UPnP Configuration...................................................................................................... 164
4.6.6 Wake On LAN............................................................................................................... 166
4.7 VPN and Remote Access.................................................................................................... 166
4.7.1 Remote Access Control................................................................................................ 167
4.7.2 PPTP Remote Dial-in.................................................................................................... 168
4.7.3 IPSec Remote Dial-in ................................................................................................... 169
4.7.4 Remote Dial-in Status................................................................................................... 171
4.7.5 LAN to LAN................................................................................................................... 172
4.8 Wireless LAN ...................................................................................................................... 175
4.8.1 Basic Concepts............................................................................................................. 175
4.8.2 General Setup............................................................................................................... 176
4.8.3 Access Control.............................................................................................................. 182
4.8.4 Station List.................................................................................................................... 182
4.8.5 Access Point Discovery ................................................................................................ 183
4.9 USB Application .................................................................................................................. 184
4.9.1 USB General Settings................................................................................................... 184
4.9.2 FTP User Management ................................................................................................ 184
4.9.3 Disk Status.................................................................................................................... 185
4.9.4 Disk Shares .................................................................................................................. 186
4.10 IPv6 ................................................................................................................................... 187
Vigor2130 Series User’s Guide
viii
4.10.1 IPv6 WAN Setup......................................................................................................... 187
4.10.2 IPv6 LAN Setup .......................................................................................................... 191
4.10.3 IPv6 Firewall Setup..................................................................................................... 192
4.10.4 IPv6 Routing ............................................................................................................... 195
4.10.5 IPv6 Neighbour........................................................................................................... 196
4.10.6 IPv6 TSPC Status....................................................................................................... 196
4.11 User................................................................................................................................... 199
4.11.1 User Configuration...................................................................................................... 199
4.12 System Maintenance......................................................................................................... 201
4.12.1 System Status............................................................................................................. 201
4.12.2 TR-069........................................................................................................................ 202
4.12.3 System Password....................................................................................................... 204
4.12.4 User Password ........................................................................................................... 204
4.12.5 Configuration Backup ................................................................................................. 205
4.12.6 Syslog/Mail Alert......................................................................................................... 207
4.12.7 Time and Date ............................................................................................................ 209
4.12.8 Management............................................................................................................... 210
4.12.9 Reboot System ........................................................................................................... 211
4.12.10 Firmware Upgrade.................................................................................................... 211
4.13 Diagnostics........................................................................................................................ 212
4.13.1 Ping............................................................................................................................. 212
4.13.2 Routing Table ............................................................................................................. 213
4.13.3 System Log................................................................................................................. 214
4.13.4 Traffic Overview.......................................................................................................... 214
4.13.5 Detailed Statistics ....................................................................................................... 215
4.13.6 MAC Address Table.................................................................................................... 217
4.13.7 DHCP Table................................................................................................................ 219
4.13.8 Data Flow Monitor....................................................................................................... 220
4.13.9 Ports State.................................................................................................................. 221
5
Trouble Shooting...........................................................................................223
5.1 Checking If the Hardware Status Is OK or Not.................................................................... 223
5.2 Checking If the Network Connection Settings on Your Computer Is OK or Not ................. 224
5.3 Pinging the Router from Your Computer............................................................................. 226
5.4 Checking If the ISP Settings are OK or Not........................................................................ 227
5.5 Forcing Vigor Router into TFTP Mode for Performing the Firmware Upgrade ................... 229
5.6 Backing to Factory Default Setting If Necessary ................................................................ 232
5.7 Contacting Your Dealer ....................................................................................................... 233
Vigor2130 Series User’s Guide
1
1
P
P
r
r
e
e
f
f
a
a
c
c
e
e
The Vigor2130 series are the routers with high speed in data transmission through WAN port
and LAN ports. With hardware NAT acceleration, the rate of Vigor2130 series can be greater
than 900Mbps almost.
With the development of NGN (Next Generation Network), you may recently hear the news
about FTTx deployment in your local area or even have already subscribed the unbundling last
mile service (e.g. VDSL2) from local ITSP for FTTx. As adopting FTTx, the main question
for end users is whether your legacy router could fully utilize its bandwidth or not.
For example, you purchase a 120 Mbps Internet connection from your ISP but your existing
router cannot support 90 Mbps throughput. That’s why DrayTek launches Vigor 2130 series –
High speed Gigabit router, perfectly complied with VDSL2 environment including Vigor2130,
Vigor2130n and Vigor2130Vn for speed-wanted customers. With high throughput
performance and secured broadband connectivity provided by Vigor 2130 series, you can
simultaneously engage these bandwidth-intensive applications, such as high-definition video
streaming, online gaming, and Internet telephony / access.
1
1
.
.
1
1
W
W
e
e
b
b
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
B
B
u
u
t
t
t
t
o
o
n
n
s
s
E
E
x
x
p
p
l
l
a
a
n
n
a
a
t
t
i
i
o
o
n
n
Several main buttons appeared on the web pages are defined as the following:
Save and apply current settings.
Cancel current settings and recover to the previous saved settings.
Clear all the selections and parameters settings, including selection from
drop-down list. All the values must be reset with factory default settings.
Add new settings for specified item.
Edit the settings for the selected item.
Delete the selected item with the corresponding settings.
Note: For the other buttons shown on the web pages, please refer to Chapter 4 for detailed
explanation.
Vigor2130 Series User’s Guide
2
1
1
.
.
2
2
L
L
E
E
D
D
I
I
n
n
d
d
i
i
c
c
a
a
t
t
o
o
r
r
s
s
a
a
n
n
d
d
C
C
o
o
n
n
n
n
e
e
c
c
t
t
o
o
r
r
s
s
Before you use the Vigor router, please get acquainted with the LED indicators and connectors
first.
1
1
.
.
2
2
.
.
1
1
F
F
o
o
r
r
V
V
i
i
g
g
o
o
r
r
2
2
1
1
3
3
0
0
LED Status Explanation
Blinking The router is powered on and running
normally.
ACT
(Activity)
Off The router is powered off.
On Hardware NAT is enabled. HPA
Off Hardware NAT is disabled.
On (Orange) The port is connected with 100Mbps.
On (Green) The port is connected with 1000Mbps.
Off The port is disconnected.
WAN
Blinking It will blink while transmitting data.
On (Orange) The port is connected with 100Mbps.
On (Green) The port is connected with 1000Mbps.
Off The port is disconnected.
LAN
1/2/3/4
Blinking The data is transmitting.
On A USB device is connected and active.USB1/2
Blinking The data is transmitting.
VPN On The VPN tunnel is active.
QoS
On The QoS function is active.
On The DoS/DDoS function is active.
DoS
Blinking It will blink while detecting an attack.
Interfac
e
Description
WAN Connector for accessing the Internet.
LAN
(1/2/3/4)
Connectors for local networked devices.
USB
(1/2)
Connector for USB storage device (Pen Driver/Mobile
HD) or printer or 3G backup.
Vigor2130 Series User’s Guide
3
Interface Description
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press
the hole and keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart with the
factory default configuration.
PWR Connector for a power adapter.
ON/OFF
Power Switch.
Vigor2130 Series User’s Guide
4
1
1
.
.
2
2
.
.
2
2
F
F
o
o
r
r
V
V
i
i
g
g
o
o
r
r
2
2
1
1
3
3
0
0
n
n
LED Status Explanation
Blinking The router is powered on and running
normally.
ACT
(Activity)
Off The router is powered off.
On Hardware NAT is enabled. HPA
Off Hardware NAT is disabled.
On (Orange) The port is connected with 100Mbps.
On (Green) The port is connected with 1000Mbps.
Off The port is disconnected.
WAN
Blinking It will blink while transmitting data.
On (Orange) The port is connected with 100Mbps.
On (Green) The port is connected with 1000Mbps.
Off The port is disconnected.
LAN
1/2/3/4
Blinking The data is transmitting.
On A USB device is connected and active.USB1/2
Blinking The data is transmitting.
VPN On The VPN tunnel is active.
QoS
On The QoS function is active.
On Wireless access point is ready. WLAN
Blinking It will blink while wireless traffic goes
through.
On Press this button for 2 seconds to wait
for client device making network
connection through WPS. When the
LED lights up, the WPS connection
will be on.
Off The WPS is off.
WPS
Button
Blinking Waiting for wireless client sending
requests for connection about two
minutes.
Interface Description
WLAN
Press the button once to enable (WLAN LED on) or
disable (WLAN LED off) wireless connection.
WAN Connector for accessing the Internet.
LAN
(1/2/3/4)
Connectors for local networked devices.
USB (1/2) Connector for USB storage (Pen Driver /Mobile HD) or
printer.
Vigor2130 Series User’s Guide
5
Interface Description
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press
the hole and keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart with the factory
default configuration.
PWR Connector for a power adapter.
ON/OFF
Power Switch.
Vigor2130 Series User’s Guide
6
1
1
.
.
2
2
.
.
3
3
F
F
o
o
r
r
V
V
i
i
g
g
o
o
r
r
2
2
1
1
3
3
0
0
V
V
n
n
LED Status Explanation
Blinking The router is powered on and running
normally.
ACT
(Activity)
Off The router is powered off.
On Hardware NAT is enabled. HPA
Off Hardware NAT is disabled.
On (Orange) The port is connected with 100Mbps.
On (Green) The port is connected with 1000Mbps.
Off The port is disconnected.
WAN
Blinking It will blink while transmitting data.
On (Orange) The port is connected with 100Mbps.
On (Green) The port is connected with 1000Mbps.
Off The port is disconnected.
LAN
1/2/3/4
Blinking The data is transmitting.
On A USB device is connected and active. USB1/2
Blinking The data is transmitting.
On The phone connected to this port is
off-hook.
Off The phone connected to this port is
on-hook.
Phone1/
Phone2
Blinking A phone call comes.
On Wireless access point is ready. WLAN
Blinking It will blink while wireless traffic goes
through.
On Press this button for 2 seconds to wait
for client device making network
connection through WPS. When the
LED lights up, the WPS connection will
be on.
Off The WPS is off.
WPS
Button
Blinking Waiting for wireless client sending
requests for connection about two
minutes.
Interface Description
WLAN
Press the button once to enable (WLAN LED on) or
disable (WLAN LED off) wireless connection.
WAN Connector for accessing the Internet.
LAN
(1/2/3/4)
Connectors for local networked devices.
USB (1/2) Connector for USB storage (Pen Driver/Mobile HD) or
printer.
Vigor2130 Series User’s Guide
7
Interface Description
Phone2/Phone1
Connector of analog phone for VoIP communication
.
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press
the hole and keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart with the factory
default configuration.
PWR Connector for a power adapter.
ON/OFF
Power Switch.
Vigor2130 Series User’s Guide
8
1
1
.
.
3
3
H
H
a
a
r
r
d
d
w
w
a
a
r
r
e
e
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
Before starting to configure the router, you have to connect your devices correctly.
1. Connect Line port to land line jack with a RJ-11 cable (Vn model).
2. Connect this device to a modem with an Ethernet cable.
3. Connect one port of 4-port switch to your computer with a RJ-45 cable. This device
allows you to connect 4 PCs directly.
4. Connect Phone port to a conventional analog telephone.
5. Connect detachable antennas to the router for Vigor2130 series (n model).
6. Connect one end of the power cord to the power port of this device. Connect the other
end to the wall outlet of electricity.
7. Power on the router.
8. Check the ACT and WAN, LAN LEDs to assure network connections.
(For the detailed information of LED status, please refer to section 1.1.)
Caution:
1. Each of the Phone ports can be connected to an analog phone only. Do not connect the
phone ports to the land line jack. Such connection might damage your router.
2. When the power is shutdown, VoIP phone will be disconnected. However, a phone set
connected to Phone 2 port can be used as the traditional telephone for the line will be
guided to land line jack via the router (loop through).
Vigor2130 Series User’s Guide
9
S
S
t
t
a
a
n
n
d
d
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
The Vigor2130 must be placed erectly. Therefore you have to install a stand onto the router to
make it standing firmly. Please follow the figures listed below to finish the installation.
c
d
e f
Vigor2130 Series User’s Guide
10
1
1
.
.
4
4
P
P
r
r
i
i
n
n
t
t
e
e
r
r
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
You can install a printer onto the router for sharing printing. All the PCs connected this router
can print documents via the router. The example provided here is made based on Windows
XP/2000. For Windows 98/SE/Vista, please visit www.draytek.com.
Before using it, please follow the steps below to configure settings for connected computers
(or wireless clients).
1. Connect the printer with the router through USB/parallel port.
2. Open Start->Settings-> Printer and Faxes.
3. Open File->Add a New Computer. A welcome dialog will appear. Please click Next.
Vigor2130 Series User’s Guide
11
4. Click Local printer attached to this computer and click Next.
5. In this dialog, choose Create a new port Type of port and use the drop down list to
select Standard TCP/IP Port. Click Next.
Vigor2130 Series User’s Guide
12
6. In the following dialog, type 192.168.1.1 (router’s LAN IP) in the field of Printer Name
or IP Address and type IP_192.168.1.1 as the port name. Then, click Next.
7. Click Standard and choose Generic Network Card.
8. Then, in the following dialog, click Finish.
Vigor2130 Series User’s Guide
13
9. Now, your system will ask you to choose right name of the printer that you installed onto
the router. Such step can make correct driver loaded onto your PC. When you finish the
selection, click Next.
10. For the final stage, you need to go back to Control Panel-> Printers and edit the
property of the new printer you have added.
11. Select "LPR" on Protocol, type p1 (number 1) as Queue Name. Then click OK. Next
please refer to the red rectangle for choosing the correct protocol and UPR name.
Vigor2130 Series User’s Guide
14
The printer can be used for printing now. Most of the printers with different manufacturers are
compatible with vigor router.
Note 1: Some printers with the fax/scanning or other additional functions are not
supported. If you do not know whether your printer is supported or not, please visit
www.draytek.com to find out the printer list. Open Support >FAQ; find out the link of
Printer Server and click it; then click the What types of printers are compatible with
Vigor router? link.
Note 2: Vigor router supports printing request from computers via LAN ports but not
WAN port.
Vigor2130 Series User’s Guide
15
2
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
i
i
n
n
g
g
B
B
a
a
s
s
i
i
c
c
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
For using the router properly, it is necessary for you to change the password of web
configuration for security and adjust primary basic settings.
2
2
.
.
1
1
T
T
w
w
o
o
-
-
L
L
e
e
v
v
e
e
l
l
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
This chapter explains how to setup a password for an administrator/user and how to adjust
basic/advanced settings for accessing Internet successfully.
For user mode operation, do not type any word on the window and click Login for the simple
web pages for configuration. Yet, for admin mode operation, please type “admin/admin” on
Username/Password and click Login for full configuration.
2
2
.
.
2
2
A
A
c
c
c
c
e
e
s
s
s
s
i
i
n
n
g
g
W
W
e
e
b
b
P
P
a
a
g
g
e
e
1. Make sure your PC connects to the router correctly.
Notice: You may either simply set up your computer to get IP dynamically
from the router or set up the IP address of the computer to be the same subnet as
the default IP address of Vigor router 192.168.1.1. For the detailed
information, please refer to the later section - Trouble Shooting of the guide.
2. Open a web browser on your PC and type http://192.168.1.1. The following window
will be open to ask for username and password.
3. For user mode operation, do not type any word on the window and click Login for the
simple web pages for configuration. Yet, for admin mode operation, please type
“admin/admin” on Username/Password and click Login for full configuration.
Notice: If you fail to access to the web configuration, please go to “Trouble
Shooting” for detecting and solving your problem.
4. The web page can be logged out according to the chosen condition. The default setting is
Auto Logout, which means the web configuration system will logout after 5 minutes
without any operation. Change the setting for your necessity.
Vigor2130 Series User’s Guide
16
2
2
.
.
3
3
C
C
h
h
a
a
n
n
g
g
i
i
n
n
g
g
P
P
a
a
s
s
s
s
w
w
o
o
r
r
d
d
No matter user mode operation or admin mode operation, please change the password for the
original security of the router.
1. Open a web browser on your PC and type http://192.168.1.1. A pop-up window will
open to ask for username and password.
2. Please type “admin/admin” on Username/Password for admin mode. Otherwise, do not
type any word (both username and password are Null for user mode) on the window and
click Login on the window.
3. Now, the Main Screen will appear.
Main screen for admin mode operation (full configuration)
Main screen for user mode operation (simple configuration)
Note: The home page will change slightly in accordance with the type of the router
you have.
Vigor2130 Series User’s Guide
17
4. Go to System Maintenance page and choose System Password/User Password.
Or
5. Type New Password in New Password and Confirm New Password fields. Then click
OK to continue.
6. Now, the password has been changed. Next time, use the new password to access the
Web Configurator for this router.
Vigor2130 Series User’s Guide
18
2
2
.
.
4
4
Q
Q
u
u
i
i
c
c
k
k
S
S
t
t
a
a
r
r
t
t
W
W
i
i
z
z
a
a
r
r
d
d
Notice: Quick Start Wizard for user mode operation is the same as for admin
mode operation.
If your router can be under an environment with high speed NAT, the configuration provide
here can help you to deploy and use the router quickly. The first screen of Quick Start
Wizard is welcome page, please click Next.
2
2
.
.
4
4
.
.
1
1
S
S
e
e
t
t
t
t
i
i
n
n
g
g
u
u
p
p
t
t
h
h
e
e
P
P
a
a
s
s
s
s
w
w
o
o
r
r
d
d
The first screen of Quick Start Wizard is entering login password. After typing the password,
please click Next.
Vigor2130 Series User’s Guide
19
2
2
.
.
4
4
.
.
2
2
S
S
e
e
t
t
t
t
i
i
n
n
g
g
u
u
p
p
t
t
h
h
e
e
T
T
i
i
m
m
e
e
Z
Z
o
o
n
n
e
e
On the next page as shown below, please select the Time Zone for the router installed and
specify the NTP server(s). Then click Next for next step.
2
2
.
.
4
4
.
.
3
3
S
S
e
e
t
t
t
t
i
i
n
n
g
g
u
u
p
p
t
t
h
h
e
e
I
I
n
n
t
t
e
e
r
r
n
n
e
e
t
t
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
o
o
n
n
On the next page as shown below, please select the appropriate connection type according to
the information from your ISP. There are five types offered in this page. Each connection type
will bring out different web page.
Vigor2130 Series User’s Guide
20
S
S
t
t
a
a
t
t
i
i
c
c
I
I
P
P
You will receive a fixed public IP address or a public subnet, namely multiple public IP
addresses from your DSL or Cable ISP service providers. In most cases, a Cable service
provider will offer a fixed public IP, while a DSL service provider will offer a public subnet.
If you have a public subnet, you could assign an IP address or many IP address to the WAN
interface.
IP Address Type the IP address.
Subnet Mask Type the subnet mask.
Gateway Type the gateway IP address.
Primary DNS Server Type in the primary IP address for the router
Secondary DNS Server Type in secondary IP address for necessity in the future.
Enable The router will detect the MAC address automatically. Or,
check the box to enable MAC address cloning.
Clone MAC Address It is available when the box of Enable is checked. Click Clone
PC Address. The result will be displayed in the field of MAC
Address.
After finishing the settings here, please click Next.
Vigor2130 Series User’s Guide
21
D
D
H
H
C
C
P
P
It is not necessary for you to type any IP address manually. Simply choose this type and the
system will obtain the IP address automatically from DHCP server.
Enable The router will detect the MAC address automatically. Or,
check the box to enable MAC address cloning.
Clone MAC Address It is available when the box of Enable is checked. Click Clone
PC Address. The result will be displayed in the field of MAC
Address.
After finishing the settings here, please click Next.
P
P
P
P
P
P
o
o
E
E
PPPoE stands for Point-to-Point Protocol over Ethernet. It relies on two widely accepted
standards: PPP and Ethernet. It connects users through an Ethernet to the Internet with a
common broadband medium, such as a single DSL line, wireless device or cable modem. All
the users over the Ethernet can share a common connection.
PPPoE is used for most of DSL modem users. All local users can share one PPPoE connection
for accessing the Internet. Your service provider will provide you information about user name,
password, and authentication mode.
Vigor2130 Series User’s Guide
22
If your ISP provides you the PPPoE connection, please select PPPoE for this router. The
following page will be shown:
User Name Assign a specific valid user name provided by the ISP.
Password Assign a valid password provided by the ISP.
Redial Policy If you want to connect to Internet all the time, you can choose
Always On. Otherwise, choose Connect on Demand.
Idle Time Out Set the timeout for breaking down the Internet after passing
through the time without any action. The unit is seconds. The
range is XX ~ XX.
MTU Size
It means Max Transmit Unit for packet. The default
setting is 1442.
Enable The router will detect the MAC address automatically. Or,
check the box to enable MAC address cloning.
Clone MAC Address It is available when the box of Enable is checked. Click Clone
PC Address. The result will be displayed in the field of MAC
Address.
After finishing the settings here, please click Next.
Vigor2130 Series User’s Guide
23
P
P
P
P
T
T
P
P
/
/
L
L
2
2
T
T
P
P
if you click PPTP/L2TP as the protocol, please manually enter the Username/Password
provided by your ISP and all the required information.
User Name Assign a specific valid user name provided by the ISP.
Password Assign a valid password provided by the ISP.
Server Address Specify the IP address of the PPTP server.
WAN IP Network Settings You can choose Static IP or DHCP as WAN IP network setting.
IP Address Type the IP address if you choose Static IP as the WAN IP
network setting.
Subnet Mask Type the subnet mask if you chose Static IP as the WAN IP.
Redial Policy If you want to connect to Internet all the time, you can choose
Always On. Otherwise, choose Connect on Demand.
Idle Time Out Set the timeout for breaking down the Internet after passing
through the time without any action. The unit is seconds. The
range is XX ~ XX.
MTU Size
It means Max Transmit Unit for packet. The default
setting is 1442.
Enable The router will detect the MAC address automatically. Or,
check the box to enable MAC address cloning.
Vigor2130 Series User’s Guide
24
Clone MAC Address It is available when the box of Enable is checked. Click Clone
PC Address. The result will be displayed in the field of MAC
Address.
After finishing the settings here, please click Next.
2
2
.
.
4
4
.
.
4
4
S
S
e
e
t
t
t
t
i
i
n
n
g
g
u
u
p
p
t
t
h
h
e
e
W
W
i
i
r
r
e
e
l
l
e
e
s
s
s
s
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
o
o
n
n
Now, you have to set up the wireless connection. For the user of Vigor2130, please skip this
step.
Enable Wireless LAN Check the box to enable the wireless function.
SSID Broadcast Choose Show to make the SSID being seen by wireless clients.
Choose Hide to prevent from wireless sniffing and make it
harder for unauthorized clients or STAs to join your wireless
LAN.
SSID It means the identification of the wireless LAN. SSID can be
any text numbers or various special characters. The default
SSID is "DrayTek". We suggest you to change it.
Encryption Select an appropriate encryption mode to improve the security
and privacy of your wireless data packets.
Each encryption mode will bring out different web page and ask
you to offer additional configuration.
W
W
E
E
P
P
If you choose WEP as the security configuration, you have to specify encryption key (Key 1 ~
Key 4) and authentication mode (open or shared). All wireless devices must support the same
Vigor2130 Series User’s Guide
25
WEP encryption bit size and have the same key.
Four keys can be entered here, but only one key can be selected at a time. The keys can be
entered in ASCII or Hexadecimal. Choose the key you wish to use by using the Default Key
drop down list.
Vigor2130 Series User’s Guide
26
W
W
P
P
A
A
-
-
P
P
S
S
K
K
If you choose WPA-PSK as the security configuration, you have to specify WPA mode,
algorithm and pre-shared key.
Type The WPA encrypts each frame transmitted from the radio using the key, which either
PSK (Pre-Shared Key) entered manually in this field below or automatically negotiated via
802.1x authentication. Select WPA, WPA2 or Auto as WPA mode.
WPA Algorithm Choose the WPA algorithm, TKIP, AES or Auto.
WPA Pre-shared Key The keys can be entered in ASCII or Hexadecimal. Check the
key you wish to use.
Vigor2130 Series User’s Guide
27
W
W
P
P
A
A
-
-
R
R
A
A
D
D
I
I
U
U
S
S
Remote Authentication Dial-In User Service (RADIUS) is a security authentication
client/server protocol that supports authentication, authorization and accounting, which is
widely used by Internet service providers. It is the most common method of authenticating and
authorizing dial-up and tunneled network users.
The built-in RADIUS client feature enables the router to assist the remote dial-in user or a
wireless station and the RADIUS server in performing mutual authentication. It enables
centralized remote access authentication for network management.
If you choose WPA-Radius as the security configuration, you have to specify WPA mode,
algorithm, Radius server, Radius server port and Radius server secret respectively.
Type The WPA encrypts each frame transmitted from the radio using
the key, which either PSK (Pre-Shared Key) entered manually
in this field below or automatically negotiated via 802.1x
authentication. Select WPA, WPA2 or Auto as WPA mode.
WPA Algorithm Choose the WPA algorithm, TKIP, AES or Auto.
Server IP Address Enter the IP address of RADIUS server.
Destination Port The UDP port number that the RADIUS server is using. The
default value is 1812, based on RFC 2138.
Shared Secret The RADIUS server and client share a secret that is used to
authenticate the messages sent between them. Both sides must
be configured to use the same shared secret.
Vigor2130 Series User’s Guide
28
W
W
P
P
S
S
WPS (Wi-Fi Protected Setup) provides easy procedure to make network connection
between wireless station and wireless access point (vigor router) with the encryption of
WPA and WPA2.
If you choose WPS as the security configuration, you can press Start WPS PIN and Start WPS
PBC to complete the wireless connection.
Configure via Push Button Click Start PBC to invoke Push-Button style WPS setup
procedure. The router will wait for WPS requests from wireless
clients about two minutes. The WPS LED on the router will
blink fast when WPS is in progress. It will return to normal
condition after two minutes. (You need to setup WPS within
two minutes)
Configure via Client PinCode Type the PIN code specified in wireless client you wish to
connect, and click Start PIN button. The WLAN LED on the
router will blink fast when WPS is in progress. It will return to
normal condition after two minutes. (You need to setup WPS
within two minutes)
After finishing the settings here, please click Next.
Vigor2130 Series User’s Guide
29
2
2
.
.
4
4
.
.
5
5
S
S
a
a
v
v
i
i
n
n
g
g
t
t
h
h
e
e
W
W
i
i
z
z
a
a
r
r
d
d
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
Now you can see the following screen. It indicates that the setup is complete. Different types
of connection modes will have different summary. Click Finish and then restart the router.
2
2
.
.
5
5
O
O
n
n
l
l
i
i
n
n
e
e
S
S
t
t
a
a
t
t
u
u
s
s
The online status shows the system status, WAN status, and other status related to this router
within one page. If you select PPPoE as the protocol, you will find out a link of Dial PPPoE
or Drop PPPoE in the Online Status web page.
Detailed explanation is shown below:
LAN Status
IP Address Displays the IP address of the LAN interface.
TX Packets Displays the total transmitted packets at the LAN interface.
Vigor2130 Series User’s Guide
30
RX Packets Displays the total received packets at the LAN interface.
TX Bytes Displays the total transmitted bytes at the LAN interface.
RX Bytes Displays the total received packets at the LAN interface.
IPv6 Address Displays the IPv6 address of the LAN interface.
WAN Status
IP Displays the IP address of the WAN interface.
GW IP Displays the IP address of the default gateway.
Mode Displays the type of WAN connection (e.g., PPPoE).
Up Time Displays the total uptime of the interface.
IPv6 Address Displays the IPv6 address of the LAN interface.
Primary DNS Displays the primary DNS server address for WAN interface.
Secondary DNS Displays the secondary DNS server address for WAN interface.
TX Packets Displays the total transmitted packets at the WAN interface.
RX Packets Displays the total number of received packets at the WAN interface.
TX Bytes Displays the total transmitted bytes at the WAN interface.
RX Bytes Displays the total received packets at the WAN interface.
Note: The words in green mean that the WAN connection of that interface is ready for
accessing Internet; the words in red mean that the WAN connection of that interface is not
ready for accessing Internet.
2
2
.
.
6
6
S
S
a
a
v
v
i
i
n
n
g
g
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
Each time you click OK on the web page for saving the configuration, you can find messages
showing the system interaction with you.
Ready indicates the system is ready for you to input settings.
Settings Saved means your settings are saved once you click Finish or OK button.
Vigor2130 Series User’s Guide
31
3
U
U
s
s
e
e
r
r
M
M
o
o
d
d
e
e
O
O
p
p
e
e
r
r
a
a
t
t
i
i
o
o
n
n
This chapter will guide users to execute simple configuration through user mode operation.
1. Open a web browser on your PC and type http://192.168.1.1. The window will ask for
typing username and password.
2. Do not type any word (both username and password are Null for user operation) on the
window and click Login on the window.
Now, the Main Screen will appear. Be aware that “User mode” will be displayed on the
bottom left side.
3
3
.
.
1
1
W
W
A
A
N
N
Quick Start Wizard offers user an easy method to quick setup the connection mode for the
router. Moreover, if you want to adjust more settings for different WAN modes, please go to
WAN group.
B
B
a
a
s
s
i
i
c
c
s
s
o
o
f
f
I
I
n
n
t
t
e
e
r
r
n
n
e
e
t
t
P
P
r
r
o
o
t
t
o
o
c
c
o
o
l
l
(
(
I
I
P
P
)
)
N
N
e
e
t
t
w
w
o
o
r
r
k
k
IP means Internet Protocol. Every device in an IP-based Network including routers, print
server, and host PCs, needs an IP address to identify its location on the network. To avoid
address conflicts, IP addresses are publicly registered with the Network Information Centre
(NIC). Having a unique IP address is mandatory for those devices participated in the public
network but not in the private TCP/IP local area networks (LANs), such as host PCs under the
management of a router since they do not need to be accessed by the public. Hence, the NIC
has reserved certain addresses that will never be registered publicly. These are known as
private IP addresses, and are listed in the following ranges:
From 10.0.0.0 to 10.255.255.255
From 172.16.0.0 to 172.31.255.255
From 192.168.0.0 to 192.168.255.255
Vigor2130 Series User’s Guide
32
W
W
h
h
a
a
t
t
a
a
r
r
e
e
P
P
u
u
b
b
l
l
i
i
c
c
I
I
P
P
A
A
d
d
d
d
r
r
e
e
s
s
s
s
a
a
n
n
d
d
P
P
r
r
i
i
v
v
a
a
t
t
e
e
I
I
P
P
A
A
d
d
d
d
r
r
e
e
s
s
s
s
As the router plays a role to manage and further protect its LAN, it interconnects groups of
host PCs. Each of them has a private IP address assigned by the built-in DHCP server of the
Vigor router. The router itself will also use the default private IP address: 192.168.1.1 to
communicate with the local hosts. Meanwhile, Vigor router will communicate with other
network devices through a public IP address. When the data flow passing through, the
Network Address Translation (NAT) function of the router will dedicate to translate
public/private addresses, and the packets will be delivered to the correct host PC in the local
area network. Thus, all the host PCs can share a common Internet connection.
G
G
e
e
t
t
Y
Y
o
o
u
u
r
r
P
P
u
u
b
b
l
l
i
i
c
c
I
I
P
P
A
A
d
d
d
d
r
r
e
e
s
s
s
s
f
f
r
r
o
o
m
m
I
I
S
S
P
P
In ADSL deployment, the PPP (Point to Point)-style authentication and authorization is
required for bridging customer premises equipment (CPE). Point to Point Protocol over
Ethernet (PPPoE) connects a network of hosts via an access device to a remote access
concentrator or aggregation concentrator. This implementation provides users with significant
ease of use. Meanwhile it provides access control, billing, and type of service according to
user requirement.
When a router begins to connect to your ISP, a serial of discovery process will occur to ask for
a connection. Then a session will be created. Your user ID and password is authenticated via
PAP or CHAP with RADIUS authentication system. And your IP address, DNS server, and
other related information will usually be assigned by your ISP.
N
N
e
e
t
t
w
w
o
o
r
r
k
k
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
o
o
n
n
b
b
y
y
3
3
G
G
U
U
S
S
B
B
M
M
o
o
d
d
e
e
m
m
For 3G mobile communication through Access Point is popular more and more, Vigor router
adds the function of 3G network connection for such purpose. By connecting 3G USB Modem
to the USB port of Vigor router, it can support HSDPA/UMTS/EDGE/GPRS/GSM and the
future 3G standard (HSUPA, etc). Vigor router with 3G USB Modem allows you to receive
3G signals at any place such as your car or certain location holding outdoor activity and share
the bandwidth for using by more people. Users can use four LAN ports on the router to access
Internet. Also, they can access Internet via SuperG wireless function of Vigor router, and
enjoy the powerful firewall, bandwidth management, VPN, VoIP features of Vigor router.
After connecting into the router, 3G USB Modem will be regarded as the second WAN port.
However, the original Ethernet WAN still can be used and Load-Balance can be done in the
router. Besides, 3G USB Modem also can be used as backup device. Therefore, when WAN is
not available, the router will use 3.5G for supporting automatically. The supported 3G USB
Modem will be listed on DrayTek web site. Please visit www.draytek.com for more detailed
information.
Below shows the menu items for WAN.
Vigor2130 Series User’s Guide
33
3
3
.
.
1
1
.
.
1
1
I
I
n
n
t
t
e
e
r
r
n
n
e
e
t
t
A
A
c
c
c
c
e
e
s
s
s
s
This page allows you to set WAN configuration with different modes. Use the Connection
Type drop down list to choose one of the WAN modes. The corresponding page will be
displayed.
S
S
t
t
a
a
t
t
i
i
c
c
For static IP mode, you usually receive a fixed public IP address or a public subnet, namely
multiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a
Cable service provider will offer a fixed public IP, while a DSL service provider will offer a
public subnet. If you have a public subnet, you could assign an IP address or many IP address
to the WAN interface.
To use Static as the accessing protocol of the internet, please choose Static mode from
Connection Type drop down menu. The following web page will be shown.
Vigor2130 Series User’s Guide
34
IP Address Type the IP address.
Subnet Mask Type the subnet mask.
Gateway IP Address Type the gateway IP address.
Primary DNS Server Type in the primary IP address for the router if you want to use
Static IP mode.
Secondary DNS Server Type in secondary IP address for using in the future if
necessary.
Mode Such function allows you to verify whether network connection
is alive or not through ARP Detect or Ping Detect. Choose ARP
Detect or Ping Detect for the system to execute for WAN
detection.
Ping IP If you choose Ping Detect as detection mode, you have to type
IP address in this field for pinging.
Clone MAC Address It is available when the box of Enable is checked. Click Clone
MAC Address. The result will be displayed in the field of
MAC Address.
After finishing all the settings here, please click OK to activate them.
Vigor2130 Series User’s Guide
35
D
D
H
H
C
C
P
P
DHCP allows a user to obtain an IP address automatically from a DHCP server on the Internet.
If you choose DHCP mode, the DHCP server of your ISP will assign a dynamic IP address for
your router automatically. It is not necessary for you to assign any setting,
Router Name Type in a name for the router. It must be the same as the name
used in Syslog.
Mode Such function allows you to verify whether network connection
is alive or not through ARP Detect or Ping Detect. Choose ARP
Detect or Ping Detect for the system to execute for WAN
detection.
Ping IP If you choose Ping Detect as detection mode, you have to type
IP address in this field for pinging.
Clone MAC Address It is available when the box of Enable is checked. Click Clone
MAC Address. The result will be displayed in the field of
MAC Address.
After finishing all the settings here, please click OK to activate them.
Vigor2130 Series User’s Guide
36
P
P
P
P
P
P
o
o
E
E
To choose PPPoE as the accessing protocol of the internet, please select PPPoE from the
Internet Access menu. The following web page will be shown.
Username Type in the username provided by ISP in this field.
Password Type in the password provided by ISP in this field.
Redial Policy If you want to connect to Internet all the time, you can choose
Always On. Otherwise, choose Connect on Demand.
Idle Time Out Set the timeout for breaking down the Internet after passing
through the time without any action. When you choose Connect
on Demand, you have to type value here.
MTU Size
It means Max Transmit Unit for packet. The default
setting is 1442. Leave blank for default value.
Enable/Disable Click Enable for activating this function. If you click Disable,
this function will be closed and all the settings that you adjusted
in this page will be invalid.
Mode Such function allows you to verify whether network connection
is alive or not through ARP Detect or Ping Detect. Choose ARP
Detect or Ping Detect for the system to execute for WAN
detection.
Ping IP If you choose Ping Detect as detection mode, you have to type
IP address in this field for pinging.
Clone MAC Address It is available when the box of Enable is checked. Click Clone
MAC Address. The result will be displayed in the field of
MAC Address.
Vigor2130 Series User’s Guide
37
After finishing all the settings here, please click OK to activate them.
P
P
P
P
T
T
P
P
/
/
L
L
2
2
T
T
P
P
To use PPTP/L2TP as the accessing protocol of the internet, please choose PPTP/L2TP from
Connection Type drop down menu. The following web page will be shown.
Username Type in the username provided by ISP in this field.
Password Type in the password provided by ISP in this field.
Server Address Type in the IP address for PPTP /L2TP server.
WAN IP Network Settings You can choose Static IP or DHCP as WAN IP network setting.
IP Address Type the IP address if you choose Static IP as the WAN IP
network setting.
Subnet Mask Type the subnet mask if you chose Static IP as the WAN IP.
Primary DNS Server If you choose Static IP for WAN IP Network Settings, you
must specify a DNS server IP address here because your ISP
should provide you with usually more than one DNS Server. If
your ISP does not provide it, the router will apply a default
DNS Server automatically.
Secondary DNS Server If you choose Static IP for WAN IP Network Settings, you can
specify secondary DNS server IP address here because your ISP
often provides you more than one DNS Server. If your ISP does
not provide it, the router will apply a default secondary DNS
Server automatically.
Vigor2130 Series User’s Guide
38
Redial Policy If you want to connect to Internet all the time, you can choose
Always On. Otherwise, choose Connect on Demand and
Idle Time Out Set the timeout for breaking down the Internet after passing
through the time without any action. When you choose Connect
on Demand, you have to type value here.
MTU Size
It means Max Transmit Unit for packet. The default
setting is 1442.
Clone MAC Address It is available when the box of Enable is checked. Click Clone
MAC Address. The result will be displayed in the field of
MAC Address.
After finishing all the settings here, please click OK to activate them.
3
3
G
G
U
U
S
S
B
B
M
M
o
o
d
d
e
e
m
m
If your router connects to a 3G modem and you want to access Internet via 3G modem, choose
3G as connection type and type the required information in this web page.
SIM PIN code Type PIN code of the SIM card that will be used to access
Internet.
Modem Initial String1/2 Such value is used to initialize USB modem. Please use the
default value. If you have any question, please contact to your
ISP.
APN Name
APN means Access Point Name which is provided and
required by some ISPs.
Vigor2130 Series User’s Guide
39
Modem Dial String Such value is used to dial through USB mode. Please use the
default value. If you have any question, please contact to your
ISP.
PPP Username Type the PPP username (optional).
PPP Password Type the PPP password (optional).
Clone MAC Address It is available when the box of Enable is checked. Click Clone
MAC Address. The result will be displayed in the field of
MAC Address.
After finishing all the settings here, please click OK to activate them.
3
3
.
.
1
1
.
.
2
2
P
P
o
o
r
r
t
t
s
s
Ports page is used to change the setting for WAN port. You can set or reset the following
items. All of them are described in detail below.
Port It displays current network interface.
Link It displays current connection status. Green light means the
WAN connection is successful.
Current It displays current speed that the router uses.
Speed Configured It can set the speed and duplex of the port. You can use the drop
down list to choose the required speed for the router. If you
have no idea in configuring speed, simple use the default setting,
Auto.
Flow Control If flow control is enabled by checking Configured box, both
parties can send PAUSE frame to the transmitting device(s) if
the receiving port is too busy to handle. If not, there will be no
flow control in the port. It drops the packet if too much to
handle.
Current Rx: indicates whether pause frames on the port are
Vigor2130 Series User’s Guide
40
obeyed.
Current Tx: indicates whether pause frames on the port are
transmitted.
Maximum Frame This module offers 1518~9600 (Bytes) length to make the long
packet for data transmission.
Excessive Collision Mode There are two modes for you to choose when excessive
collision happened in half-duplex condition.
Discard - It determines whether the MAC drops frames after an
excessive collision has occurred. If yes, a frame is dropped after
excessive collision. This is IEEE Standard 802.3 half-duplex
flow control operation.
Restart - It determines whether the MAC retransmits frames
after an excessive collision has occurred. If set, a frame is not
dropped after excessive collisions, but the backoff sequence is
restarted. This is a violation of IEEE Standard 802.3, but is
useful in non-dropping half-duplex flow control operation.
Power Control The Configured column allows for changing the power savings
mode parameters per port.
Disabled: All power savings mechanisms disabled.
ActiPHY: Link down power savings enabled.
PerfectReach: Link up power savings enabled.
Enabled: Both link up and link down power savings enabled.
Refresh Click this button to refresh the information for WAN port.
After finishing all the settings here, please click OK to activate them.
3
3
.
.
1
1
.
.
3
3
3
3
G
G
B
B
a
a
c
c
k
k
u
u
p
p
This page is used to setup 3G backup function. If you enable 3G backup, make sure your
WAN connection type is not in 3G mode. When the WAN connection is broken, router will
try to keep the connection with 3G mode. After WAN connection is recovered, router will
disconnect the 3G connection automatically.
Vigor2130 Series User’s Guide
41
SIM PIN code Type PIN code of the SIM card that will be used to access
Internet.
Modem Initial String1/2 Such value is used to initialize USB modem. Please use the
default value. If you have any question, please contact to your
ISP.
APN Name
APN means Access Point Name which is provided and
required by some ISPs.
Modem Dial String Such value is used to dial through USB mode. Please use the
default value. If you have any question, please contact to your
ISP.
PPP Username Type the PPP username (optional).
PPP Password Type the PPP password (optional).
Clone MAC Address It is available when the box of Enable is checked. Click Clone
MAC Address. The result will be displayed in the field of
MAC Address.
3
3
.
.
2
2
L
L
A
A
N
N
Local Area Network (LAN) is a group of subnets regulated and ruled by router. The design of
network structure is related to what type of public IP addresses coming from your ISP.
B
B
a
a
s
s
i
i
c
c
s
s
o
o
f
f
L
L
A
A
N
N
The most generic function of Vigor router is NAT. It creates a private subnet of your own. As
mentioned previously, the router will talk to other public hosts on the Internet by using public
IP address and talking to local hosts by using its private IP address. What NAT does is to
translate the packets from public IP address to private IP address to forward the right packets
to the right host and vice versa. Besides, Vigor router has a built-in DHCP server that assigns
private IP address to each local host. See the following diagram for a briefly understanding.
Vigor2130 Series User’s Guide
42
In some special case, you may have a public IP subnet from your ISP such as
220.135.240.0/24. This means that you can set up a public subnet or call second subnet that
each host is equipped with a public IP address. As a part of the public subnet, the Vigor router
will serve for IP routing to help hosts in the public subnet to communicate with other public
hosts or servers outside. Therefore, the router should be set as the gateway for public hosts.
W
W
h
h
a
a
t
t
i
i
s
s
R
R
o
o
u
u
t
t
i
i
n
n
g
g
I
I
n
n
f
f
o
o
r
r
m
m
a
a
t
t
i
i
o
o
n
n
P
P
r
r
o
o
t
t
o
o
c
c
o
o
l
l
(
(
R
R
I
I
P
P
)
)
Vigor router will exchange routing information with neighboring routers using the RIP to
accomplish IP routing. This allows users to change the information of the router such as IP
address and the routers will automatically inform for each other.
W
W
h
h
a
a
t
t
a
a
r
r
e
e
V
V
i
i
r
r
t
t
u
u
a
a
l
l
L
L
A
A
N
N
s
s
a
a
n
n
d
d
R
R
a
a
t
t
e
e
C
C
o
o
n
n
t
t
r
r
o
o
l
l
Vigor2130 Series User’s Guide
43
You can group local hosts by physical ports and create up to 4 virtual LANs. To manage the
communication between different groups, please set up rules in Virtual LAN (VLAN) function
and the rate of each.
Below shows the LAN menu:
Vigor2130 Series User’s Guide
44
3
3
.
.
2
2
.
.
1
1
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
This page provides you the general settings for LAN.
Click LAN to open the LAN settings page and choose General Setup.
IP Address Type in private IP address for connecting to a local private
network (Default: 192.168.1.1).
Subnet Mask Type in an address code that determines the size of the network.
(Default: 255.255.255.0/ 24)
Enable DHCP DHCP stands for Dynamic Host Configuration Protocol. The
router by factory default acts a DHCP server for your network
so it automatically dispatch related IP settings to any local user
configured as a DHCP client. It is highly recommended that you
leave the router enabled as a DHCP server if you do not have a
DHCP server for your network.
You can configure the router to serve as a DHCP server for the
2nd subnet. Check the box to enable DHCP server setting.
Start IP Address Enter a value of the IP address pool for the DHCP server to start
with when issuing IP addresses. If the 2nd IP address of your
router is 220.135.240.1, the starting IP address must be
220.135.240.2 or greater, but smaller than 220.135.240.254.
IP Pool Counts Enter the number of IP addresses in the pool. The maximum is
10. For example, if you type 3 and the 2nd IP address of your
router is 220.135.240.1, the range of IP address by the DHCP
server will be from 220.135.240.2 to 220.135.240.11.
Lease Time It allows you to set the leased time for the specified PC.
Force DNS manual setting Force router to use DNS servers in this page instead of DNS
servers given by the Internet Access server (PPPoE, PPTP,
L2TP or DHCP server).
Primary IP Address You must specify a DNS server IP address here because your
ISP should provide you with usually more than one DNS Server.
If your ISP does not provide it, the router will automatically
apply default DNS Server IP address: 194.109.6.66 to this field.
Vigor2130 Series User’s Guide
45
Secondary IP Address You can specify secondary DNS server IP address here because
your ISP often provides you more than one DNS Server. If your
ISP does not provide it, the router will automatically apply
default secondary DNS Server IP address: 194.98.0.1 to this
field.
The default DNS Server IP address can be found via Online
Status:
If both the Primary IP and Secondary IP Address fields are left
empty, the router will assign its own IP address to local users as
a DNS proxy server and maintain a DNS cache.
If the IP address of a domain name is already in the DNS cache,
the router will resolve the domain name immediately.
Otherwise, the router forwards the DNS query packet to the
external DNS server by establishing a WAN (e.g. DSL/Cable)
connection.
After finishing all the settings here, please click OK to activate them.
3
3
.
.
2
2
.
.
2
2
P
P
o
o
r
r
t
t
s
s
Ports page is used to change the setting for LAN ports. You can set or reset the following
items. All of them are described in detail below.
Port It displays current network interface.
Link It displays current connection status. Green light means the
LAN connection is successful.
Current It displays current speed that the router uses.
Speed Configured It can set the speed and duplex of the port. You can use the drop
down list to choose the required speed for the router. If you
have no idea in configuring speed, simple use the default setting,
Vigor2130 Series User’s Guide
46
Auto.
Flow Control If flow control is enabled by checking Configured box, both
parties can send PAUSE frame to the transmitting device(s) if
the receiving port is too busy to handle. If not, there will be no
flow control in the port. It drops the packet if too much to
handle.
Current Rx: indicates whether pause frames on the port are
obeyed.
Current Tx: indicates whether pause frames on the port are
transmitted.
Maximum Frame This module offers 1518~9600 (Bytes) length to make the long
packet for data transmission.
Excessive Collision Mode There are two modes for you to choose when excessive
collision happened in half-duplex condition.
Discard - It determines whether the MAC drops frames after an
excessive collision has occurred. If yes, a frame is dropped after
excessive collision. This is IEEE Standard 802.3 half-duplex
flow control operation.
Restart - It determines whether the MAC retransmits frames
after an excessive collision has occurred. If set, a frame is not
dropped after excessive collisions, but the backoff sequence is
restarted. This is a violation of IEEE Standard 802.3, but is
useful in non-dropping half-duplex flow control operation.
Power Control The Configured column allows for changing the power savings
mode parameters per port.
Disabled: All power savings mechanisms disabled.
ActiPHY: Link down power savings enabled.
PerfectReach: Link up power savings enabled.
Enabled: Both link up and link down power savings enabled.
Refresh Click this button to refresh the information for LAN ports.
After finishing all the settings here, please click OK to activate them.
Vigor2130 Series User’s Guide
47
3
3
.
.
2
2
.
.
3
3
M
M
A
A
C
C
A
A
d
d
d
d
r
r
e
e
s
s
s
s
T
T
a
a
b
b
l
l
e
e
This page allows you to set timeouts for entries in dynamic MAC Table and configure the
static MAC table here.
Disable Automatic Aging Stop the MAC table aging timer, the learned MAC address will
not age out automatically. The default setting is enabled. Check
the box to disable this function if required.
Age Time Delete a MAC address idling for a period of time from the
following MAC Table, which will not affect static MAC
address. Range of MAC Address Aging Time is 10-1000000
seconds. The default Aging Time is 300 seconds.
MAC Table Learning List the port members which apply dynamic learning
mechanism or not.
Auto - Enable this port MAC address dynamic learning
mechanism.
Disable - Disable this port MAC address dynamic learning
mechanism, only support static MAC address setting.
Secure - Disable this port MAC address dynamic learning
mechanism and copy the dynamic learning packets to CPU.
Static MAC Table Config.. Specify static MAC address with VLAN ID to apply aging
configuration.
Delete - Click the button to remove the VLAN setting.
VLAN ID - Specify the interface for the port members.
MAC Address - It is a six-byte long Ethernet hardware address
and usually expressed by hex and separated by hyphens. For
example, 00 – 40 - C7 - D6 – 00 – 02.
WAN/LAN1~4 - Check the port to apply this VLAN setting.
Vigor2130 Series User’s Guide
48
To add a new static MAC entry, click Add new static entry. A new entry will be shown as
follows. Choose VLAN ID and type a new MAC address. Next, specify port member for this
table. Finally, click OK to save the changes.
3
3
.
.
2
2
.
.
4
4
V
V
L
L
A
A
N
N
Virtual LAN function provides you a very convenient way to manage hosts by grouping them
based on the physical port. You can also manage the in/out rate of each port. Go to LAN page
and select VLAN. The following page will appear. VLAN function is enabled in default.
Add New Private VLAN Click this button to add a new private VLAN. The router allows
you to add up to 4 VLAN.
Vigor2130 Series User’s Guide
49
To add or remove a VLAN, please refer to the following example.
1. VLAN 1 is consisted of hosts linked to P1 ~ P4.
2. After checking the box to enable VLAN function, you will check the table according to
the needs as shown below.
3. To remove VLAN, click the Delete button for the one you want to remove and click OK
to save the results.
3
3
.
.
2
2
.
.
5
5
M
M
o
o
n
n
i
i
t
t
o
o
r
r
P
P
o
o
r
r
t
t
It is used to monitor the traffic of the network. For example, we assume that LAN1 and LAN2
are Monitor Port and Monitor ingress Port respectively, thus, the traffic received by LAN2
will be copied to LAN1 for monitoring.
Enable Monitor Port Check to enable this function.
Monitor Port Click the one of the LAN ports to specify it for monitoring.
Monitor ingress port Check to set up the port(s) for being monitored. It only
monitors the packets received by the port you set up.
Monitor egress port Check to set up the port(s) for being monitored. It only
monitors the packets transmitted by the port you set up.
Vigor2130 Series User’s Guide
50
3
3
.
.
2
2
.
.
6
6
S
S
t
t
a
a
t
t
i
i
c
c
R
R
o
o
u
u
t
t
e
e
Go to LAN and choose Static Route to open setting page.
Index The number (1 to 10) under Index displays current static router.
Destination Address Display the destination address of the static route.
Status Display the status of the static route.
Add Add a new static route.
A
A
d
d
d
d
S
S
t
t
a
a
t
t
i
i
c
c
R
R
o
o
u
u
t
t
e
e
s
s
t
t
o
o
P
P
r
r
i
i
v
v
a
a
t
t
e
e
a
a
n
n
d
d
P
P
u
u
b
b
l
l
i
i
c
c
N
N
e
e
t
t
w
w
o
o
r
r
k
k
s
s
Here is an example of setting Static Route in Main Router so that user A and B locating in
different subnet can talk to each other via the router. Assuming the Internet access has been
configured and the router works properly:
z use the Main Router to surf the Internet.
z create a private subnet 192.168.10.0 using an internal Router A (192.168.1.2)
z create a public subnet 211.100.88.0 via an internal Router B (192.168.1.3).
z have set Main Router 192.168.1.1 as the default gateway for the Router A 192.168.1.2.
Before setting Static Route, user A cannot talk to user B for Router A can only forward
recognized packets to its default gateway Main Router.
Vigor2130 Series User’s Guide
51
1. Click the LAN - Static Route and click Add. Check the Enable box. Please add a static
route as shown below, which regulates all packets destined to 192.168.10.0 will be
forwarded to 192.168.1.2. Click OK.
2. Return to Static Route page. Click Add again to add another static route as show below,
which regulates all packets destined to 211.100.88.0 will be forwarded to 192.168.1.3.
3. Verify current routing table.
3
3
.
.
2
2
.
.
7
7
B
B
i
i
n
n
d
d
I
I
P
P
t
t
o
o
M
M
A
A
C
C
This function is used to bind the IP and MAC address in LAN to have a strengthening control
in network. When this function is enabled, all the assigned IP and MAC address binding
together cannot be changed. If you modified the binding IP or MAC address, it might cause
you not access into the Internet.
Click LAN and click Bind IP to MAC to open the setup page.
Vigor2130 Series User’s Guide
52
Enable Click this radio button to invoke this function. However,
IP/MAC which is not listed in IP Bind List also can connect to
Internet.
Disable Click this radio button to disable this function. All the settings
on this page will be invalid.
Strict Bind Click this radio button to block the connection of the IP/MAC
which is not listed in IP Bind List.
ARP Table This table is the LAN ARP table of this router. The information
for IP and MAC will be displayed in this field. Each pair of IP
and MAC address listed in ARP table can be selected and added
to IP Bind List by clicking Add below
.
Add and Edit IP Address – Type the IP address that will be used for the
specified MAC address.
Mac Address – Type the MAC address that is used to bind
with the assigned IP address.
Refresh It is used to refresh the ARP table. When there is one new PC
added to the LAN, you can click this link to obtain the newly
ARP table information.
IP Bind List It displays a list for the IP bind to MAC information.
Add It allows you to add the one you choose from the ARP table or
the IP/MAC address typed in Add and Edit to the table of IP
Bind List.
Edit It allows you to edit and modify the selected IP address and
MAC address that you create before.
Vigor2130 Series User’s Guide
53
Remove You can remove any item listed in IP Bind List. Simply click
and select the one, and click Remove. The selected item will be
removed from the IP Bind List.
Note: Before you select Strict Bind, you have to bind one set of IP/MAC address for one
PC. If not, no one of the PCs can access into Internet. And the web configurator of the router
might not be accessed.
3
3
.
.
3
3
N
N
A
A
T
T
Usually, the router serves as an NAT (Network Address Translation) router. NAT is a
mechanism that one or more private IP addresses can be mapped into a single public one.
Public IP address is usually assigned by your ISP, for which you may get charged. Private IP
addresses are recognized only among internal hosts.
When the outgoing packets destined to some public server on the Internet reach the NAT
router, the router will change its source address into the public IP address of the router, select
the available public port, and then forward it. At the same time, the router shall list an entry in
a table to memorize this address/port-mapping relationship. When the public server response,
the incoming traffic, of course, is destined to the router’s public IP address and the router will
do the inversion based on its table. Therefore, the internal host can communicate with external
host smoothly.
The benefit of the NAT includes:
z Save cost on applying public IP address and apply efficient usage of IP address.
NAT allows the internal IP addresses of local hosts to be translated into one public IP
address, thus you can have only one IP address on behalf of the entire internal hosts.
z Enhance security of the internal network by obscuring the IP address. There are
many attacks aiming victims based on the IP address. Since the attacker cannot be aware
of any private IP addresses, the NAT function can protect the internal network.
On NAT page, you will see the private IP address defined in RFC-1918. Usually we use the
192.168.1.0/24 subnet for the router. As stated before, the NAT facility can map one or
more IP addresses and/or service ports into different specified services. In other words, the
NAT function can be achieved by using port mapping methods.
Below shows the menu items for NAT.
3
3
.
.
3
3
.
.
1
1
H
H
a
a
r
r
d
d
w
w
a
a
r
r
e
e
N
N
A
A
T
T
Hardware-base Acceleration Engine, also named Protocol Processing Engine API is the
function that Draytek provides to extremely speed up the NAT performance.
While the hardware acceleration mechanism is activated, most of the bandwidth usage will
be concentrated on the specific sessions which increase transmission speed to get ultimately
accelerated.
With Hardware NAT, LAN to WAN NAT throughput can be over 900M bps. But be sure that
your PC has Giga Ethernet and connect with CAT6 Ethernet cable.
Vigor2130 Series User’s Guide
54
3
3
.
.
3
3
.
.
2
2
O
O
p
p
e
e
n
n
P
P
o
o
r
r
t
t
s
s
Open Ports allows you to open a range of ports for the traffic of special applications.
Common application of Open Ports includes P2P application (e.g., BT, KaZaA, Gnutella,
WinMX, eMule and others), Internet Camera etc. Ensure that you keep the application
involved up-to-date to avoid falling victim to any security exploits.
To add a new open port, click Add new entry.
Name Specify the name for the defined network service.
Protocol Specify the transport layer protocol. It could be TCP, UDP and
TCP+UDP.
Start Port Specify the starting port number of the service offered by the
local host.
End Port (optional) Specify the ending port number of the service offered by the
local host.
Local Host Enter the private IP address of the local host.
Vigor2130 Series User’s Guide
55
Local Port (optional) If it is configured, the forwarded traffic is mapped to this port
on the local host.
3
3
.
.
3
3
.
.
3
3
D
D
M
M
Z
Z
H
H
o
o
s
s
t
t
Vigor router provides a facility DMZ Host that maps ALL unsolicited data on any protocol to
a single host in the LAN. Regular web surfing and other such Internet activities from other
clients will continue to work without inappropriate interruption. DMZ Host allows a defined
internal user to be totally exposed to the Internet, which usually helps some special
applications such as Netmeeting or Internet Games etc.
Note: The security properties of NAT are somewhat bypassed if you set up DMZ host. We
suggest you to add additional filter rules or a secondary firewall.
Click DMZ Host to open the following page:
Enable Check to enable the DMZ Host function.
DMZ IP Enter the private IP address of the DMZ host, or click Choose
PC to select one.
Vigor2130 Series User’s Guide
56
3
3
.
.
4
4
B
B
a
a
n
n
d
d
w
w
i
i
d
d
t
t
h
h
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
Below shows the menu items for Bandwidth Management.
3
3
.
.
4
4
.
.
1
1
S
S
e
e
s
s
s
s
i
i
o
o
n
n
L
L
i
i
m
m
i
i
t
t
A PC with private IP address can access to the Internet via NAT router. The router will
generate the records of NAT sessions for such connection. The P2P (Peer to Peer) applications
(e.g., BitTorrent) always need many sessions for procession and also they will occupy over
resources which might result in important accesses impacted. To solve the problem, you can
use limit session to limit the session procession for specified Hosts.
In the Bandwidth Management menu, click Sessions Limit to open the web page.
To activate the function of limit session, simply click Enable and set the default session limit.
Disable Click this button to close the function of limit session.
Enable Click this button to activate the function of limit session.
Default Session Limit Defines the default session number used for each computer in
LAN.
Limitation List Displays a list of specific limitations that you set on this web
page.
Vigor2130 Series User’s Guide
57
Start IP Defines the start LAN IP address for limit session.
End IP Defines the end LAN IP address for limit session.
Sessions Limit Defines the available session number for each host in the
specific range of IP addresses. If you do not set the session
number in this field, the system will use the default session limit
for the specific limitation you set for each index.
Add Adds the specific session limitation onto the list above.
Edit Allows you to edit the settings for the selected limitation.
Delete Remove the selected settings existing on the limitation list.
When you finish adding a new session limit, simply click OK.
3
3
.
.
4
4
.
.
2
2
B
B
a
a
n
n
d
d
w
w
i
i
d
d
t
t
h
h
L
L
i
i
m
m
i
i
t
t
The downstream or upstream from FTP, HTTP or some P2P applications will occupy large of
bandwidth and affect the applications for other programs. Please use Limit Bandwidth to make
the bandwidth usage more efficient.
In the Bandwidth Management menu, click Bandwidth Limit to open the web page.
To activate the function of limit bandwidth, simply click Enable and set the default or
user-defined upstream and downstream limit.
Disable
Click this button to close the function of limit bandwidth.
Enable
Click this button to activate the function of limit bandwidth.
Vigor2130 Series User’s Guide
58
Smart Bandwidth Limit
Click this radio button to configure the default limitation for
bandwidth.
When session number exceeds – type the value here as a
threshold to apply the smart bandwidth limit.
TX limit - Define the default speed of the upstream for
each computer in LAN.
RX limit - Define the default speed of the downstream for
each computer in LAN.
User-defined Bandwidth
Limit
Click this radio button to configure the user-defined
limitation for bandwidth.
Limitation List - Display a list of specific limitations that
you set on this web page.
Start IP - Bandwidth limit can be applied on certain IP
range. That’s, only the PCs within the range will be
influenced by the bandwidth limitation set here. Please
define the start IP address for the specific limitation.
End IP - Define the end IP address for the specific
limitation.
TX Limit - Define the limitation for the speed of the
upstream to be applied as specific limitation. If you do not
set the limit in this field, the system will use the default
speed for the specific limitation you set for each index.
RX Limit - Define the limitation for the speed of the
downstream to be applied as specific limitation. If you do
not set the limit in this field, the system will use the default
speed for the specific limitation you set for each index.
Add - Add the specific speed limitation onto the list above.
Edit - Allows you to edit the settings for the selected
limitation.
Delete - Remove the selected settings existing on the
limitation list.
When you finish adding a new bandwidth limit, simply click OK.
Vigor2130 Series User’s Guide
59
3
3
.
.
4
4
.
.
3
3
P
P
o
o
r
r
t
t
R
R
a
a
t
t
e
e
C
C
o
o
n
n
t
t
r
r
o
o
l
l
A policer can limit the bandwidth of received frames. It is located in front of the ingress queue.
And a shaper can limit the bandwidth of transmitted frames. It is located after the ingress
queues. This page allows you to configure the switch port rate limit for Policers and Shapers.
Port Represent LAN or WAN interface.
Policer Enabled Check this box to enable policer function.
Policer Rate(Rx) Type the number for policer function. The default value is 500.
It is restricted to 500-1000000 when the Policer Unit is set in
kbps, and it is restricted to 1-1000 when the Policer Unit is set
in Mbps.
Policer Unit Determine the unit (kbps/Mbps) for policer.
Shaper Enabled Check this box to enable shaper function.
Shaper Rate (Tx) Type the number for shaper function. The default value is 500.
It is restricted to 500-1000000 when the Shaper Unit is set in
kbps, and it is restricted to 1-1000 when the Shaper Unit is set
in Mbps.
Shaper Unit Determine the unit (kbps/Mbps) for shaper function.
3
3
.
.
4
4
.
.
4
4
Q
Q
o
o
S
S
C
C
o
o
n
n
t
t
r
r
o
o
l
l
L
L
i
i
s
s
t
t
Deploying QoS (Quality of Service) management to guarantee that all applications receive the
service levels required and sufficient bandwidth to meet performance expectations is indeed
one important aspect of modern enterprise network.
One reason for QoS is that numerous TCP-based applications tend to continually increase their
transmission rate and consume all available bandwidth, which is called TCP slow start. If
other applications are not protected by QoS, it will detract much from their performance in the
overcrowded network. This is especially essential to those are low tolerant of loss, delay or
jitter (delay variation).
Another reason is due to congestions at network intersections where speeds of interconnected
circuits mismatch or traffic aggregates, packets will queue up and traffic can be throttled back
to a lower speed. If there’s no defined priority to specify which packets should be discarded
(or in another term “dropped”) from an overflowing queue, packets of sensitive applications
mentioned above might be the ones to drop off. How this will affect application performance?
There are two components within Primary configuration of QoS deployment:
z Classification: Identifying low-latency or crucial applications and marking them for
high-priority service level enforcement throughout the network.
Vigor2130 Series User’s Guide
60
z Scheduling: Based on classification of service level to assign packets to queues and
associated service types
The basic QoS implementation in Vigor routers is to classify and schedule packets based on
the service type information in the IP header. For instance, to ensure the connection with the
headquarter, a teleworker may enforce an index of QoS Control to reserve bandwidth for
HTTPS connection while using lots of application at the same time.
One more larger-scale implementation of QoS network is to apply DSCP (Differentiated
Service Code Point) and IP Precedence disciplines at Layer 3. Compared with legacy IP
Precedence that uses Type of Service (ToS) field in the IP header to define 8 service classes,
DSCP is a successor creating 64 classes possible with backward IP Precedence compatibility.
In a QoS-enabled network, or Differentiated Service (DiffServ or DS) framework, a DS
domain owner should sign a Service License Agreement (SLA) with other DS domain owners
to define the service level provided toward traffic from different domains. Then each DS node
in these domains will perform the priority treatment. This is called per-hop-behavior (PHB).
The definition of PHB includes Expedited Forwarding (EF), Assured Forwarding (AF), and
Best Effort (BE). AF defines the four classes of delivery (or forwarding) classes and three
levels of drop precedence in each class.
Vigor routers as edge routers of DS domain shall check the marked DSCP value in the IP
header of bypassing traffic, thus to allocate certain amount of resource execute appropriate
policing, classification or scheduling. The core routers in the backbone will do the same
checking before executing treatments in order to ensure service-level consistency throughout
the whole QoS-enabled network.
However, each node may take different attitude toward packets with high priority marking
since it may bind with the business deal of SLA among different DS domain owners. It’s not
easy to achieve deterministic and consistent high-priority QoS traffic throughout the whole
network with merely Vigor router’s effort.
In the Bandwidth Management menu, click QoS Control List (QCL) to open the web page.
Vigor2130 Series User’s Guide
61
QCE Type Display the type of that QCE (QoS Control Entries).
Type Value Display the value specified for the QCE.
Traffic Class Display the class of the data transmission for the QCE.
QoS Control List allows users to set up to five groups of QCL. Each QCL group can contain
12 QCE settings.
A
A
d
d
d
d
i
i
n
n
g
g
a
a
N
N
e
e
w
w
Q
Q
C
C
E
E
Click to add a new QCE onto this page. Different QCE type will bring out different web
settings.
z If you choose Ethernet Type as QCE Type, you have to type value for it and specify
traffic class from Low, Normal, Medium and High.
Vigor2130 Series User’s Guide
62
Ethernet Type Value Either 8~63 ASCII characters, such as 012345678(or 64
Hexadecimal digits leading by 0x, such as "0x321253abcde...").
z If you choose VLAN ID as QCE Type, you have to type the ID number for it and specify
traffic class from Low, Normal, Medium and High.
z If you choose TCP/UDP Port as QCE Type, you have to type the port number for it and
specify traffic class from Low, Normal, Medium and High.
TCP/UDP Port Click Single or Range. If you select Range, you have to type
in the starting port number and the end porting number on
the boxes below.
TCP/UDP Port Range Type in the starting port number and the end porting number
here if you choose Range as the type.
z If you choose DSCP as QCE Type, you have to type value for it and specify traffic class
from Low, Normal, Medium and High.
Vigor2130 Series User’s Guide
63
z If you choose ToS as QCE Type, you have to specify priority class from Low, Normal,
Medium and High.
z If you choose Tag Priority as QCE Type, you have to specify priority class from Low,
Normal, Medium and High.
E
E
d
d
i
i
t
t
i
i
n
n
g
g
a
a
Q
Q
C
C
E
E
Click to modify the settings of an existing QCE on this page.
M
M
o
o
v
v
i
i
n
n
g
g
U
U
p
p
/
/
D
D
o
o
w
w
n
n
a
a
Q
Q
C
C
E
E
Click and to move a QCE up and down.
Vigor2130 Series User’s Guide
64
D
D
e
e
l
l
e
e
t
t
i
i
n
n
g
g
a
a
Q
Q
C
C
E
E
To delete a QCE in the list, simply click of that one. It will be removed immediately.
3
3
.
.
4
4
.
.
5
5
P
P
o
o
r
r
t
t
s
s
P
P
r
r
i
i
o
o
r
r
i
i
t
t
y
y
This page allows you to configure QoS settings for each port. The classification is controlled
by a QCL (Quality Control List) that is assigned to each port. A QCL consists of an ordered
list of up to 12 QCEs (Quality Control Entry). Each QCE can be used to classify certain
frames to a specific QoS class. This classification can be based on parameters such as VLAN
ID, UDP/TCP port, IPv4/IPv6 DSCP or Tag Priority. Frames not matching any of the QCEs
are classified to the default QoS class for the port.
Port Indicate the interface for the physical port, WAN port, LAN
port and Wireless Port.
Default Class Use the drop down list to choose the priority for each port.
QCL Use the drop down list to choose the QCL number defined in
QoS Control List for the port.
Queuing Mode Use the drop down list to choose suitable mode.
Vigor2130 Series User’s Guide
65
Queue Weighted Use the drop down list to choose 1, 2, 4, or 8 as the queue
weighted number.
3
3
.
.
4
4
.
.
6
6
Q
Q
o
o
S
S
S
S
t
t
a
a
t
t
i
i
s
s
t
t
i
i
c
c
s
s
This page displays statistics for QoS setting. Click WAN/LAN link to check detailed
information for each interface.
Click WAN/LAN link to check detailed information for each interface.
Rx Packets Display the counting number of the packet received.
Rx Octets Display the total received bytes.
Rx Unicast Display the counting number of the received unicast packet.
Vigor2130 Series User’s Guide
66
Rx Broadcast Display the counting number of the received broadcast packet.
Rx Pause Display the counting number of the received pause packet.
RX 64 Bytes Display the number of 64-byte frames in good and bad packets
received.
RX 65-127 Bytes Display the number of 65 ~ 127-byte frames in good and bad
packets received.
RX 128-255 Bytes Display the number of 128 ~ 255-byte frames in good and bad
packets received.
RX 256-511 Bytes Display the number of 256 ~ 511-byte frames in good and bad
packets received.
RX 512-1023 Bytes Display the number of 512 ~ 1023-byte frames in good and bad
packets received.
RX 1024- 1526 Bytes Display the number of 1024-1522-byte frames in good and bad
packets received.
RX 1527 Bytes Display the number of 1527-byte frames in good and bad
packets received.
Rx Low Display the low queue counter of the packet received.
Rx Normal Display the normal queue counter of the packet received.
Rx Medium Display the medium queue counter of the packet received.
Rx High Display the high queue counter of the packet received.
Rx Drops Display the number of frames dropped due to the lack of
receiving buffer.
Rx CRC/Alignment Display the number of Alignment errors packets received.
Rx Undersize Display the number of short frames (<64 Bytes) with valid
CRC.
Rx Oversize Display the number of long frames (according to max_length
register) with valid CRC.
Rx Fragments Display the number of short frames (< 64 bytes) with invalid
CRC.
Rx Jabber Display the number of long frames (according tomax_length
register) with invalid CRC.
Rx Filtered Display the filtered number of the packet received.
Tx Packets Display the counting number of the packet transmitted.
Tx Octets Display the total transmitted bytes.
Tx Unicast Display the show the counting number of the transmitted
unicast packet.
Tx Multicast Display the show the counting number of the transmitted
multicast packet.
Tx Broadcast Display the counting number of the transmitted broadcast
packet.
Tx Pause Show the counting number of the transmitted pause packet.
Vigor2130 Series User’s Guide
67
Tx 64 Bytes Display the number of 64-byte frames in good and bad packets
transmitted.
Tx 65-127 Bytes Display the number of 65 ~ 127-byte frames in good and bad
packets transmitted.
Tx 128-255 Bytes Display the number of 128 ~ 255-byte frames in good and bad
packets transmitted.
Tx 256-511 Bytes Display the number of 256 ~ 511-byte frames in good and bad
packets transmitted.
Tx 512-1023 Bytes Display the number of 512 ~ 1023-byte frames in good and bad
packets transmitted.
Tx 1024- 1526 Bytes Display the number of 1024 ~ 1522-byt frames in good and bad
packets transmitted.
Tx 1527 Bytes: Display the number of 1527-byte frames in good and bad
packets transmitted.
Tx Low Display the low queue counter of the packet transmitted.
Tx Normal Display the normal queue counter of the packet transmitted.
Tx Medium Display the medium queue counter of the packet received.
Tx High Display the high queue counter of the packet received.
Tx Drops Display the number of frames dropped due to excessive
collision, late collision, or frame aging.
Tx lat/Exc.Coll. Display the number of Frames late collision or excessive
collision Error, which switch transmitted
3
3
.
.
5
5
A
A
p
p
p
p
l
l
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s
Below shows the menu items for Applications.
3
3
.
.
5
5
.
.
1
1
D
D
y
y
n
n
a
a
m
m
i
i
c
c
D
D
N
N
S
S
The ISP often provides you with a dynamic IP address when you connect to the Internet via
your ISP. It means that the public IP address assigned to your router changes each time you
access the Internet. The Dynamic DNS feature lets you assign a domain name to a dynamic
WAN IP address. It allows the router to update its online WAN IP address mappings on the
specified Dynamic DNS server. Once the router is online, you will be able to use the
registered domain name to access the router or internal virtual servers from the Internet. It is
particularly helpful if you host a web server, FTP server, or other server behind the router.
Before you use the Dynamic DNS feature, you have to apply for free DDNS service to the
DDNS service providers. The router provides up to three accounts from three different DDNS
service providers. Basically, Vigor routers are compatible with the DDNS services supplied by
most popular DDNS service providers such as www.dyndns.org, www.no-ip.com,
Vigor2130 Series User’s Guide
68
www.dtdns.com, www.changeip.com, www.dynamic- nameserver.com. You should visit
their websites to register your own domain name for the router.
Enable Dynamic DNS Check this box to enable the current account.
DynDNS Service Select the service provider for the DDNS account.
Hostname Type in one domain name that you applied previously. Use the
drop down list to choose the desired domain.
Username Type in the login name that you set for applying domain.
Password Type in the password that you set for applying domain.
Check IP change every Set the interval for checking the information.
Force IP update every Force the router updates its information to DDNS server with
the interval set here.
Click OK button to activate the settings. You will see your setting has been saved.
3
3
.
.
5
5
.
.
2
2
S
S
c
c
h
h
e
e
d
d
u
u
l
l
e
e
The Vigor router has a built-in real time clock which can update itself manually or
automatically by means of Network Time Protocols (NTP). As a result, you can not only
schedule the router to dialup to the Internet at a specified time, but also restrict Internet access
to certain hours so that users can connect to the Internet only during certain hours, say,
business hours. The schedule is also applicable to other functions.
You have to set your time before set schedule. In System Maintenance>> Time and Date
menu, press Inquire Time button to set the Vigor router’s clock to current time of your PC.
The clock will reset once if you power down or reset the router. There is another way to set up
time. You can inquiry an NTP server (a time server) on the Internet to synchronize the router’s
clock. This method can only be applied when the WAN connection has been built up.
You can set up to 15 schedules. To add a schedule profile, please click Add.
Vigor2130 Series User’s Guide
69
Enable Check to enable the schedule.
Start Date Specify the starting date of the schedule.
Start Time Specify the starting time of the schedule.
Action Specify which action should be applied during the period of the
schedule.
WAN UP/DOWN – WAN connection will be activated /
inactivated based on the time schedule configured here.
WiFi UP/DOWN – Wireless Wi-Fi connection will be
activated / inactivated based on the time schedule configured
here.
VPN UP/DOWN - VPN connection will be activated /
inactivated based on the time schedule configured here.
Acts Specify how often the schedule will be applied
Once -The schedule will be applied just once
Routine or Weekdays -Specify which days in one week should
perform the schedule.
Vigor2130 Series User’s Guide
70
3
3
.
.
5
5
.
.
3
3
I
I
G
G
M
M
P
P
S
S
n
n
o
o
o
o
p
p
i
i
n
n
g
g
IGMP snooping means multicast traffic will be forwarded to ports that have members of that
group. If you disable IGMP snooping, the system will make multicast traffic treated in the
same manner as broadcast traffic.
Snooping Enabled Check the box to enable this function.
Unregistered IPMC… Check the box to enable unregistered IPMC traffic flooding.
Fast Leave Check the box to Fast Leave on the LAN port.
3
3
.
.
5
5
.
.
4
4
I
I
G
G
M
M
P
P
S
S
t
t
a
a
t
t
u
u
s
s
This page display current IGMP snooping status.
V1~3 Reports Receive Display the number of Received V1 – V3 Reports.
V2 Leave Receive Display the number of Received V2 Leave.
Groups Display current
IGMP groups. Maximum number of group
for each VLAN can be set is 128.
Port Members Display the LAN ports in this group.
Refresh Click this button to refresh the page immediately.
Clear Click this button to clear the settings on this page.
Vigor2130 Series User’s Guide
71
3
3
.
.
5
5
.
.
5
5
U
U
P
P
n
n
P
P
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
The UPnP (Universal Plug and Play) protocol is supported to bring to network connected
devices the ease of installation and configuration which is already available for directly
connected PC peripherals with the existing Windows 'Plug and Play' system. For NAT routers,
the major feature of UPnP on the router is “NAT Traversal”. This enables applications inside
the firewall to automatically open the ports that they need to pass through a router. It is more
reliable than requiring a router to work out by itself which ports need to be opened. Further,
the user does not have to manually set up port mappings or a DMZ. UPnP is available on
Windows XP and the router provide the associated support for MSN Messenger to allow full
use of the voice, video and messaging features.
Enable UPNP Enable UPnP function. You have to type the download and
upload speed.
After setting Enable UPNP Service setting, an icon of IP Broadband Connection on Router
on Windows XP/Network Connections will appear. The connection status and control status
will be able to be activated. The NAT Traversal of UPnP enables the multimedia features of
your applications to operate. This has to manually set up port mappings or use other similar
methods. The screenshots below show examples of this facility.
The UPnP facility on the router enables UPnP aware applications such as MSN Messenger to
discover what are behind a NAT router. The application will also learn the external IP address
and configure port mappings on the router. Subsequently, such a facility forwards packets from
the external ports of the router to the internal ports used by the application.
Vigor2130 Series User’s Guide
72
The reminder as regards concern about Firewall and UPnP
Can't work with Firewall Software
Enabling firewall applications on your PC may cause the UPnP function not working
properly. This is because these applications will block the accessing ability of some network
ports.
Security Considerations
Activating the UPnP function on your network may incur some security threats. You should
consider carefully these risks before activating the UPnP function.
¾ Some Microsoft operating systems have found out the UPnP weaknesses and hence
you need to ensure that you have applied the latest service packs and patches.
¾ Non-privileged users can control some router functions, including removing and
adding port mappings.
The UPnP function dynamically adds port mappings on behalf of some UPnP-aware
applications. When the applications terminate abnormally, these mappings may not be
removed.
3
3
.
.
5
5
.
.
6
6
W
W
a
a
k
k
e
e
O
O
n
n
L
L
A
A
N
N
A PC client on LAN can be woken up by the router it connects. When a user wants to wake up
a specified PC through the router, he/she must type correct MAC address of the specified PC
on this web page of Wake On LAN of this router.
In addition, such PC must have installed a network card supporting WOL function. By the
way, WOL function must be set as “Enable” on the BIOS setting.
Vigor2130 Series User’s Guide
73
Wake by Two types provide for you to wake up the binded IP. If you
choose Wake by MAC Address, you have to type the correct
MAC address of the host in MAC Address boxes. If you choose
Wake by IP Address, you have to choose the correct IP address.
IP Address The IP addresses that have been configured in LAN>>Bind IP
to MAC will be shown in this drop down list. Choose the IP
address from the drop down list that you want to wake up.
MAC Address Type any one of the MAC address of the binded PCs.
Wake Up Click this button to wake up the selected IP. See the following
figure. The result will be shown on the box.
3
3
.
.
6
6
W
W
i
i
r
r
e
e
l
l
e
e
s
s
s
s
L
L
A
A
N
N
This function is used for “n” models.
3
3
.
.
6
6
.
.
1
1
B
B
a
a
s
s
i
i
c
c
C
C
o
o
n
n
c
c
e
e
p
p
t
t
s
s
Over recent years, the market for wireless communications has enjoyed tremendous growth.
Wireless technology now reaches or is capable of reaching virtually every location on the
surface of the earth. Hundreds of millions of people exchange information every day via
wireless communication products. The Vigor “n” model, a.k.a. Vigor wireless router, is
designed for maximum flexibility and efficiency of a small office/home. Any authorized staff
can bring a built-in WLAN client PDA or notebook into a meeting room for conference
without laying a clot of LAN cable or drilling holes everywhere. Wireless LAN enables high
mobility so WLAN users can simultaneously access all LAN facilities just like on a wired
LAN as well as Internet access
The Vigor wireless routers are equipped with a wireless LAN interface compliant with the
standard IEEE 802.11n draft 2 protocol. To boost its performance further, the Vigor Router is
also loaded with advanced wireless technology to lift up data rate up to 300 Mbps*. Hence,
you can finally smoothly enjoy stream music and video.
Vigor2130 Series User’s Guide
74
Note: * The actual data throughput will vary according to the network conditions and
environmental factors, including volume of network traffic, network overhead and
building materials.
In an Infrastructure Mode of wireless network, Vigor wireless router plays a role as an Access
Point (AP) connecting to lots of wireless clients or Stations (STA). All the STAs will share the
same Internet connection via Vigor wireless router. The General Settings will set up the
information of this wireless network, including its SSID as identification, located channel etc.
S
S
e
e
c
c
u
u
r
r
i
i
t
t
y
y
O
O
v
v
e
e
r
r
v
v
i
i
e
e
w
w
Real-time Hardware Encryption: Vigor Router is equipped with a hardware AES encryption
engine so it can apply the highest protection to your data without influencing user experience.
Complete Security Standard Selection: To ensure the security and privacy of your wireless
communication, we provide several prevailing standards on market.
WEP (Wired Equivalent Privacy) is a legacy method to encrypt each frame transmitted via
radio using either a 64-bit or 128-bit key. Usually access point will preset a set of four keys
and it will communicate with each station using only one out of the four keys.
WPA (Wi-Fi Protected Access), the most dominating security mechanism in industry, is
separated into two categories: WPA-personal or called WPA Pre-Share Key (WPA/PSK), and
WPA-Enterprise or called WPA/802.1x.
In WPA-Personal, a pre-defined key is used for encryption during data transmission. WPA
applies Temporal Key Integrity Protocol (TKIP) for data encryption while WPA2 applies AES.
The WPA-Enterprise combines not only encryption but also authentication.
Since WEP has been proved vulnerable, you may consider using WPA for the most secure
connection. You should select the appropriate security mechanism according to your needs.
No matter which security suite you select, they all will enhance the over-the-air data
protection and /or privacy on your wireless network. The Vigor wireless router is very flexible
and can support multiple secure connections with both WEP and WPA at the same time.
Below shows the menu items for Wireless LAN.
Vigor2130 Series User’s Guide
75
3
3
.
.
6
6
.
.
2
2
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
By clicking the General Setup, a new web page will appear so that you could configure the
SSIDs and the wireless channel.
Please refer to the following figure for more information.
Enable Wireless LAN Check the box to enable the wireless function.
SSID Broadcast Choose Show to make the SSID being seen by wireless clients.
Choose Hide to prevent from wireless sniffing and make it
harder for unauthorized clients or STAs to join your wireless
LAN.
SSID It means the identification of the wireless LAN. SSID can be
any text numbers or various special characters. The default
SSID is "DrayTek". We suggest you to change it.
Isolate
Check this box to make the wireless clients (stations) with
the same SSID not accessing for each other.
Wireless Mode Choose the wireless mode for this router. At present, only
802.11B/B/N mix is available.
Channel It means the channel of frequency of the wireless LAN. The
default channel is 11. You may switch channel if the selected
channel is under serious interference. If you have no idea of
choosing the frequency, please select Auto to let system
determine for you.
Vigor2130 Series User’s Guide
76
Tx Power Set the power percentage for transmission signal of access point.
The greater the value is, the higher intensity of the signal will
be.
Enable Green AP Such function is used to reduce the power consumption (Green
AP) for the access point. When there is no station connected,
the power consumption of access point will be reduced.
Encryption Select an appropriate encryption mode to improve the security
and privacy of your wireless data packets.
Each encryption mode will bring out different web page and ask
you to offer additional configuration.
W
W
i
i
r
r
e
e
l
l
e
e
s
s
s
s
S
S
e
e
c
c
u
u
r
r
i
i
t
t
y
y
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
For the security of your system, choose the proper encryption for data transmission. Different
encryption mode will bring out different setting encryption ways.
z None
The encryption mechanism is turned off.
z WEP
Accepts only WEP clients and the encryption key should be entered in WEP Key.
Default Key All wireless devices must support the same WEP
encryption bit size and have the same key.
Vigor2130 Series User’s Guide
77
Key1-Key4 Four keys can be entered here, but only one key can be
selected at a time. The format of WEP Key is restricted to
5 ASCII characters or 10 hexadecimal values in 64-bit
encryption level, or restricted to 13 ASCII characters or 26
hexadecimal values in 128-bit encryption level. The
allowed content is the ASCII characters from 33(!) to
126(~) except '#' and ',' .
Authentication Mode Choose OPEN or SHARED as the authentication mode.
OPEN: Set wireless to authentication open mode.
SHARED: Set wireless to authentication shared mode.
z WPA-PSK
Accepts only WPA clients and the encryption key should be entered in PSK. The WPA
encrypts each frame transmitted from the radio using the key, which either PSK
(Pre-Shared Key) entered manually in this field below or automatically negotiated via
802.1x authentication.
WPA Mode Select WPA, WPA2 or Auto as the type.
WPA Algorithm Select TKIP, AES or auto as the algorithm for WPA.
WPA Pre-Shared Key Either 8~63 ASCII characters, such as 012345678..(or 64
Hexadecimal digits leading by 0x, such as
"0x321253abcde...").
z WPA-RADIUS
The built-in RADIUS client feature enables the router to assist the remote dial-in user or
a wireless station and the RADIUS server in performing mutual authentication. It enables
centralized remote access authentication for network management.
Vigor2130 Series User’s Guide
78
Type The WPA encrypts each frame transmitted from the radio
using the key, which either PSK (Pre-Shared Key) entered
manually in this field below or automatically negotiated
via 802.1x authentication. Select WPA, WPA2 or Auto as
WPA mode.
WPA Algorithm Choose the WPA algorithm, TKIP, AES or Auto.
Server IP Address Enter the IP address of RADIUS server.
Destination Port The UDP port number that the RADIUS server is using.
The default value is 1812, based on RFC 2138.
Shared Secret The RADIUS server and client share a secret that is used
to authenticate the messages sent between them. Both
sides must be configured to use the same shared secret.
z WPS
WPS (Wi-Fi Protected Setup) provides easy procedure to make network connection
between wireless station and wireless access point (vigor router) with the encryption
of WPA and WPA2.
Configure via Push Button Click Start PBC to invoke Push-Button style WPS setup
procedure. The router will wait for WPS requests from
wireless clients about two minutes. The WPS LED on the
Vigor2130 Series User’s Guide
79
router will blink fast when WPS is in progress. It will
return to normal condition after two minutes. (You need to
setup WPS within two minutes)
Configure via Client PinCode Type the PIN code specified in wireless client you
wish to connect, and click Start PIN button. The WLAN
LED on the router will blink fast when WPS is in progress.
It will return to normal condition after two minutes. (You
need to setup WPS within two minutes
It is the simplest way to build connection between wireless network clients and vigor
router. Users do not need to select any encryption mode and type any long encryption
passphrase to setup a wireless client every time. He/she only needs to press a button on
wireless client, and WPS will connect for client and router automatically.
Note: Such function is available for the wireless station with WPS supported.
There are two methods to do network connection through WPS between AP and Stations:
pressing the Start PBC button or using PIN Code.
On the side of Vigor 2130 series which served as an AP, press WPS button once on the
front panel of the router or click Start PBC on web configuration interface. On the side
of a station with network card installed, press Start PBC button of network card.
Vigor2130 Series User’s Guide
80
If you want to use PIN code, you have to know the PIN code specified in wireless client.
Then provide the PIN code of the wireless client you wish to connect to the vigor router.
3
3
.
.
6
6
.
.
3
3
A
A
c
c
c
c
e
e
s
s
s
s
C
C
o
o
n
n
t
t
r
r
o
o
l
l
For additional security of wireless access, the Access Control facility allows you to restrict
the network access right by controlling the wireless LAN MAC address of client. Only the
valid MAC address that has been configured can access the wireless LAN interface. By
clicking the Access Control, a new web page will appear, as depicted below, so that you
could edit the clients' MAC addresses to control their access rights (deny or allow).
Filter Type Choose the rule for the MAC addresses displayed in this
page.
Allow List – all the MAC address of wireless clients listed
here are allowed to do wireless connection.
Deny List – all the MAC address of wireless clients listed
here will be blocked.
Add a New Entry Add a new MAC address into the list.
Delete Delete the selected MAC address in the list. This button
will appear only an entry of MAC Address has been typed.
Cancel Give up the configuration.
Vigor2130 Series User’s Guide
81
OK Click it to save the configuration.
3
3
.
.
6
6
.
.
4
4
S
S
t
t
a
a
t
t
i
i
o
o
n
n
L
L
i
i
s
s
t
t
Station List provides the knowledge of connecting wireless clients now along with its status
code.
Index Display the number of the connecting client.
IP Address Display the WAN IP address for the connecting client.
MAC Address Display the MAC Address for the connecting client.
Connected Time Display the connection time for the connecting client.
SSID Display the SSID that the station(s) connected through.
Auto-refresh Check this box to force the system refreshing the table
automatically.
Refresh Click this button to refresh current page.
Vigor2130 Series User’s Guide
82
3
3
.
.
6
6
.
.
5
5
A
A
c
c
c
c
e
e
s
s
s
s
P
P
o
o
i
i
n
n
t
t
D
D
i
i
s
s
c
c
o
o
v
v
e
e
r
r
y
y
Vigor router can scan all regulatory channels and find working APs in the neighborhood.
Based on the scanning result, users will know which channel is clean for usage.
Note: During the scanning process (about 5 seconds), no client is allowed to connect to
Vigor.
The table will list channel, SSID, BSSID, Security and the Signal strength of working APs in
the neighborhood.
CH Display the channel for the scanned AP.
SSID Display the SSID of the scanned AP.
BSSID Display the MAC address of the scanned AP.
Security Display the encryption type of the scanned AP.
Signal Display the strength (in percentage) of the signal of the
scanned AP.
Scan It is used to discover all the connected AP. The results will
be shown on the box above this button.
3
3
.
.
7
7
U
U
S
S
B
B
A
A
p
p
p
p
l
l
i
i
c
c
a
a
t
t
i
i
o
o
n
n
USB diskette can be regarded as an FTP server. By way of Vigor router, uses on LAN/WAN
can access, write and read data stored in USB diskette. After setting the configuration in USB
Application, you can type the IP address of the Vigor router and username/password created
in USB Application>>FTP User Management on the FTP client software. Thus, the client
can use the FTP site (USB diskette) through Vigor router.
3
3
.
.
7
7
.
.
1
1
U
U
S
S
B
B
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
At present, the Vigor router can support USB diskette with versions of FAT16 and FAT32
only. Therefore, before connecting the USB diskette into the Vigor router, please make sure
the memory format for the USB diskette is FAT16 or FAT32. It is recommended for you to
use FAT32 for viewing the filename completely (FAT16 cannot support long filename).
Vigor2130 Series User’s Guide
83
Enable FTP Check this box to enable FTP connection.
Enable Disk Sharing Check this box to enable Samba file sharing.
Workgroup Name Type the name for FTP users for accessing into FTP server
(USB diskette). Be aware that users cannot access into USB
diskette in anonymity. Later, you can open FTP client software
and type the username specified here for accessing into USB
storage diskette.
3
3
.
.
7
7
.
.
2
2
F
F
T
T
P
P
U
U
s
s
e
e
r
r
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
This page allows you to change user setting for USB storage disk. Before modifying settings
in this page, please insert a USB diskette and configure settings in User>>User
Configuration first. Otherwise, an error message will appear to warn you.
Click the name link under User Name to open the setting web page.
User Name It displays the username that user uses to login to the FTP
server.
Volume Select the proper volume for the connected USB diskette.
Home Folder It determines the range for the client to access into.
The user can enter a directory name in this field. Then,
after clicking OK, the router will create the specific/new
folder in the USB diskette. In addition, if the user types “/”
here, he/she can access into all of the disk folders and files
in USB diskette.
Vigor2130 Series User’s Guide
84
Note: When write protect status for the USB diskette is
ON, you cannot type any new folder name in this field.
Only “/” can be used in such case.
Access Rule Select the access right for the USB diskette.
When you finish the settings, simply click OK to save the configuration.
3
3
.
.
7
7
.
.
3
3
D
D
i
i
s
s
k
k
S
S
t
t
a
a
t
t
u
u
s
s
This page can display current using status of the USB diskette. If you want to remove the
diskette from USB port in router, please check the box of Safely Remove Disk first. And then,
remove the USB diskette later.
Safely Remove Disk Check this box and then you can remove the USB diskette
safely.
Manufacturer Display the manufacturer of the disk.
Model Display the type of the disk.
Size Display the storage space of the diskette(s).
Free Capacity Display the free disk space of the diskette(s).
Status Display current usage status of the diskette(s)
Update Click this button to refresh the disk status.
3
3
.
.
7
7
.
.
4
4
D
D
i
i
s
s
k
k
S
S
h
h
a
a
r
r
e
e
s
s
This page can define the folder which will be shared while Samba File Sharing is enabled.
To add a new entry for disk sharing, please click Add a New Entry to open the following
page.
Vigor2130 Series User’s Guide
85
Share Name Type a name to be used as shared folder name in Samba service.
The name must not contain spaces or special characters.
Comment Type the brief description for the disk sharing. The words here
will be seen in Network Neighborhood on Windows client
computers
Volume Select the proper volume for the connected USB diskette.
Path It determines the range for the client to access into.
The user can enter a directory name in this field. Then,
after clicking OK, the router will create the specific/new
folder in the USB diskette. In addition, if the user types “/”
here, he/she can access into all of the disk folders and files
in USB diskette.
Note: When write protect status for the USB diskette is
ON, you cannot type any new folder name in this field.
Only “/” can be used in such case.
Visible Check this box to make the shared folder to be seen in Network
Neighborhood on Windows of clients in local network.
Access Rights Specify the access right and apply to all the wireless clients that
want to connect to the attached USB diskette.
All Users Read-only - everyone has read-only access to the
share disk.
All Users Read-write - everyone has read-write access to the
share disk.
Specific Users – Only specific user(s) can access into the share
disk.
Vigor2130 Series User’s Guide
86
3
3
.
.
8
8
I
I
P
P
v
v
6
6
3
3
.
.
8
8
.
.
1
1
I
I
P
P
v
v
6
6
W
W
A
A
N
N
S
S
e
e
t
t
u
u
p
p
This page defines the IPv6 connection types for WAN interface. Possible types contain
Link-Local only, Static IPv6, DHCPv6 and TSPC. Each type requires different parameter
settings.
L
L
i
i
n
n
k
k
-
-
L
L
o
o
c
c
a
a
l
l
O
O
n
n
l
l
y
y
Link-Local address is used for communicating with neighbouring nodes on the same link. It is
defined by the address prefix fe80::/10. You don't need to setup Link-Local address manually
for it is generated automatically according to your MAC Address.
Vigor2130 Series User’s Guide
87
IPv6 Address The least significant 64 bits are usually chosen as the interface
hardware address constructed in modified EUI-64 format.
Prefix Length Display the fixed value (64) for prefix length.
S
S
t
t
a
a
t
t
i
i
c
c
I
I
P
P
v
v
6
6
This type allows you to setup static IPv6 address for WAN.
IPv6 Address Type your IPv6 static IP here.
Prefix Length Type your IPv6 address prefix length here.
Gateway IPv6 Server Type your IPv6 gateway address here.
Primary DNS Server Type your IPv6 primary DNS Server address here.
Secondary DNS Server Type your IPv6 secondary DNS Server address here.
Vigor2130 Series User’s Guide
88
D
D
H
H
C
C
P
P
v
v
6
6
C
C
l
l
i
i
e
e
n
n
t
t
(
(
I
I
A
A
_
_
N
N
A
A
)
)
DHCPv6 client mode would use IA_NA option of DHCPv6 protocol to obtain IPv6 address
from server.
Primary DNS Server Type primary DNS Server address here.
Secondary DNS Server Type secondary DNS Server address here
D
D
H
H
C
C
P
P
v
v
6
6
C
C
l
l
i
i
e
e
n
n
t
t
(
(
I
I
A
A
_
_
P
P
D
D
)
)
DHCPv6 client mode would use IA_PA option of DHCPv6 protocol to obtain IPv6 prefix
from server.
T
T
S
S
P
P
C
C
Tunnel setup protocol client (TSPC) is an application which could help you to connect to IPv6
network easily.
Please make sure your IPv4 WAN connection is OK and apply one free account from hexage
(http://go6.net/4105/register.asp
) before you try to use TSPC for network connection. TSPC
would connect to tunnel broker and requests a tunnel according to the specifications inside the
configuration file. It gets a public IPv6 IP address and an IPv6 prefix from the tunnel broker
and then monitors the state of the tunnel in background.
After getting the IPv6 prefix and starting router advertisement daemon (RADVD), the PC
behind this router can directly connect to IPv6 the Internet.
Vigor2130 Series User’s Guide
89
Username Type the name obtained from the broker. “vigor2130” is a
default username applied from
http://go6.net/4105/register.asp
. It is suggested for you to
apply another username and password.
Password Type the password assigned with the user name.
Confirm Password Type the password again to make the confirmation.
Tunnel Broker Type the address for the tunnel broker IP, FQDN or an
optional port number.
Tunnel Mode IPv6-in-IPv4 Tunnel- Let the broker choose the tunnel
mode appropriate for the client.
IPv6-in-IPv4 (Native) - Request an IPv6 in IPv4 tunnel.
IPv6-in-IPv4 (NAT Traversal - Request an IPv6 in UDP
of IPv4 tunnel (for clients behind a NAT).
Auto-reconnect Delay After passing the time set here, the client will retry to
connect in case of failure or keepalive timeout.
0 means not retry.
Keepalive Yes – Keep the connection between TSPC and tunnel
broker always on. TSPC will send ping packet to make
sure the connection between both ends is normal.
No - The client will not send keepalives.
Keepalive_interval Type the time for the interval between two keepalive
messages transferring from the client to the broker.
Vigor2130 Series User’s Guide
90
Prefixlen Type the required prefix length for the client network.
If_prefix Display LAN interface name.
The name of the OS
interface that will be configured with the first 64 of
the received prefix from the broker and the router
advertisement daemon is started to advertise that
prefix on the if_prefix interface.
3
3
.
.
8
8
.
.
2
2
I
I
P
P
v
v
6
6
L
L
A
A
N
N
S
S
e
e
t
t
u
u
p
p
This page defines the IPv6 connection types for LAN interface. Possible types contain
DHCPv6 and RADVD. Each type requires different parameter settings.
IPv6 Address Type static IPv6 address for LAN.
IPv6 Link_local Address It is used for communicating with neighbouring nodes on
the same link. It is defined by the address prefix fe80::/10.
You don't need to setup Link-Local address manually for it
is generated automatically according to your MAC
Address.
Enable Autoconfiguration Check this box to enable the auto-configuration function
for IPv6 connection.
Configuration Type Vigor2130 provides 2 daemons for LAN side IPv6 address
configuration. One is RADVD(stateless) and the other is
DHCPv6 Server (Stateful).
DHCPv6 Server - DHCPv6 Server could assign IPv6
address to PC according to the Start/End IPv6 address
configuration.
IPv6 Start Address/IPv6 End Address- Type the start and
end address for IPv6 server.
Vigor2130 Series User’s Guide
91
RADVD - The router advertisement daemon (radvd) sends
Router Advertisement messages, specified by RFC 2461,
to a local Ethernet LAN periodically and when requested
by a node sending a Router Solicitation message. These
messages are required for IPv6 stateless autoconfiguration.
Advertisement Lifetime - The lifetime associated with
the default router in units of seconds. It's used to control
the lifetime of the prefix. The maximum value corresponds
to 18.2 hours. A lifetime of 0 indicates that the router is not
a default router and should not appear on the default router
list.
3
3
.
.
8
8
.
.
3
3
I
I
P
P
v
v
6
6
F
F
i
i
r
r
e
e
w
w
a
a
l
l
l
l
S
S
e
e
t
t
u
u
p
p
This page allows users to set firewall for the protocol of IPv6.
Note: Section 4.4 Firewall is configured for IPv4 packets only.
Name Display the name of the rule.
Protocol Display the protocol (TCP/UDP/ICMPv6) the rule uses.
Source IP Display the source IP address of such rule.
Destination IP Display the destination IP address of such rule.
Source Port Display the source port number of such rule.
Destination Port Display the destination port number of such rule.
Action Display the status (accept or drop) of such rule.
Vigor2130 Series User’s Guide
92
A
A
d
d
d
d
i
i
n
n
g
g
a
a
N
N
e
e
w
w
R
R
u
u
l
l
e
e
Click Add New Rule to configure a new rule for IPv6 Firewall.
Note: You can set up to 20 sets of IPv6 rules.
Name Type a name for the rule.
Protocol Specify a protocol for this rule.
Source IP Type Determine the IP type as the source.
Source IP Type the IP address here if you choose Single as Source
IP Type.
Source Subnet Type the subnet mask here if you choose Subnet as
Source IP Type.
Destination IP Type Determine the IP type as the destination.
Destination IP Type the IP address here if you choose Single as
Destination IP Type.
Vigor2130 Series User’s Guide
93
Destination Subnet Type the subnet mask here if you choose Subnet as
Destination IP Type.
Source Start Port Type a value as the source start port. Such value will be
available only TCP/UDP is selected as the protocol.
Source End Port (optional) Type a value as the source end port. Such value will be
available only TCP/UDP is selected as the protocol.
Destination Start Port Type a value as the destination start port. Such value will
be available only TCP/UDP is selected as the protocol.
Destination End Port (optional) Type a value as the destination end port. Such value will be
available only TCP/UDP is selected as the protocol.
Action Set the action that the router will perform for the packets
through the protocol of IPv6.
Accept – If the IPv6 packets fit the condition listed in this
page, the router will let it pass through.
Drop - If the IPv6 packets fit the condition listed in this
page, the router will block it.
3
3
.
.
8
8
.
.
4
4
I
I
P
P
v
v
6
6
R
R
o
o
u
u
t
t
i
i
n
n
g
g
This page displays the routing table for the protocol of IPv6.
Device Display the
interface name (eth0, eth1, fp, etc..)that
used to transfer packets with addresses matching the
prefix.
Prefix The IPv6 address prefix.
Metric Display the
distance to the target (usually counted in
hops). It is not used by recent kernels, but may be
needed by routing daemons.
Expires Display the lifetime of the route.
MTU Display t
he largest size (in bytes) of a packet.
Advmss Display t
he largest size (in bytes) of an unfragmented
piece of a routing advertisement.
Vigor2130 Series User’s Guide
94
Hoplimit Display the number of network segments on which the
packet is allowed to travel before discarded.
Auto-refresh Check this box to enable an automatic refresh of the page
at regular intervals.
3
3
.
.
8
8
.
.
5
5
I
I
P
P
v
v
6
6
N
N
e
e
i
i
g
g
h
h
b
b
o
o
u
u
r
r
IPv6 uses neighbor discovery protocol to find out neighbors on the same link.
Device The interface name of the link where the neighbor is on.
IP Address The IPv6 address of the neighbor.
MAC Address The link-layer address of the neighbor.
State Possible states include:
incomplete - address resolution is in progress.
reachable - neighbor is reachable.
stale – neighbor(s) may be unreachable but not verified
until a packet is sent).
delay - neighbor may be unreachable and a packet was sent.
probe - neighbor may be unreachable and probes are sent
to verify the reachability.
Auto-refresh Check this box to enable an automatic refresh of the page
at regular intervals.
3
3
.
.
8
8
.
.
6
6
I
I
P
P
v
v
6
6
T
T
S
S
P
P
C
C
S
S
t
t
a
a
t
t
u
u
s
s
IPv6 TSPC status web page could help you to diagnose the connection status of TSPC. TSPC
log contains some debug information from program.
If TSPC has not configured properly, the router will display the following page when the user
tries to connect through TSPC connection.
Vigor2130 Series User’s Guide
95
When TSPC configuration has been done, the router will start to connect. The connecting page
will be shown as below:
When the router detects all the information, the screen will be shown as follows. One set of
TSPC prefix and prefix length will be obtained after the connection between TSPC and
Tunnel broker built.
Connection Status It will bring out different pages to represent IPv6
disconnection, connecting and connected.
Tunnel Information Display interface name (used to send TSPC prefix), tunnel
mode, local endpoint addresses, remote endpoint address,
TSPC Prfix, TSPC Prefixlen (prefix length), tunnel broker
and so on.
Tunnel Status Disconnected - The remote client doesn't connect to the
tunnel server.
Connecting - The remote client is connecting to the tunnel
server.
Connected – The remote client has been connected to the
tunnel server.
Activity Sent - sent to the tunnel (RX bytes).
Received - received from the tunnel (RX bytes).
Vigor2130 Series User’s Guide
96
When the router connects to the tunnel broker, the router will use RADVD to transmit the
prefix to the PC on LAN. Next, the PC will generate one set of IPv6 public IP (see the figure
below). Users can use such IP for connecting to IPv6 network.
When your PC obtains the IPv6 address, please connect to http://www.ipv6.org
. If your PC
access Internet via IPv6 connection, your IPv6 address will be shown on the web page
immediately. Refer to the following figure.
Vigor2130 Series User’s Guide
97
3
3
.
.
9
9
U
U
s
s
e
e
r
r
3
3
.
.
9
9
.
.
1
1
U
U
s
s
e
e
r
r
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
This page allows you to set user’s setting that allowed to use PPTP, FTP, IPSEC/L2TP
connection.
A
A
d
d
d
d
i
i
n
n
g
g
a
a
N
N
e
e
w
w
U
U
s
s
e
e
r
r
Click Add a New User to open the following page.
Username Type a name for this user.
Full Name Type full name for this user.
Password Type the password for this user.
Password (again) Type the password again for confirmation.
Allow Disk Sharing Check this box to enable Samba file sharing.
Allow IPSEC/L2TP Check this box to let the user connect via IPSEC/L2TP.
Allow PPTP Check this box to let the user connect via PPTP.
Allow FTP Check this box to let the user connect to FTP server.
When you finish the settings, simply click OK to save the configuration. The new user will be
created and displayed on the page.
Vigor2130 Series User’s Guide
98
E
E
d
d
i
i
t
t
i
i
n
n
g
g
/
/
D
D
e
e
l
l
e
e
t
t
i
i
n
n
g
g
U
U
s
s
e
e
r
r
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
To edit a user, click the name link under Username to open the following page. Modify the
settings except Username and then click OK to save and exit it. If you want to remove such
user settings, simply click Delete User.
3
3
.
.
1
1
0
0
S
S
y
y
s
s
t
t
e
e
m
m
M
M
a
a
i
i
n
n
t
t
e
e
n
n
a
a
n
n
c
c
e
e
For the system setup, there are several items that you have to know the way of configuration:
Status, TR-069, User Password, Configuration Backup, Syslog/Mail Alert, Time and Date,
Management, Reboot System and Firmware Upgrade.
Below shows the menu items for System Maintenance.
3
3
.
.
1
1
0
0
.
.
1
1
S
S
y
y
s
s
t
t
e
e
m
m
S
S
t
t
a
a
t
t
u
u
s
s
The System Status provides basic network settings of Vigor router. It includes LAN and
WAN interface information. Also, you could get the current running firmware version or
firmware related information from this presentation.
Vigor2130 Series User’s Guide
99
Model Name Display the model name of the router.
Firmware Version Display the firmware version of the router.
Build Date/Time Display the date and time of the current firmware build.
System Date Display current time and date for the system server.
System Uptime Display the connection time for the system server.
System-------
CPU Usage Display the percentage of the CPU usage of your system.
Memory Usage Display the size of the memory usage and the percentage.
LAN-------
MAC Address Display the MAC address of the LAN Interface.
IP Address Display the IP address of the LAN interface.
IP Mask Display the subnet mask address of the LAN interface.
IPv6 Address (Global) Display the global IPv6 address of the LAN interface.
IPv6 Address (Link) Display the link local IPv6 address of the LAN interface.
DHCP Server Display if the DHCP server is active or not.
WAN-------
Connection Mode Display current connection type used.
Link Status Display the connection status.
MAC Address Display the MAC address of the WAN Interface.
IP Address Display the IP address of the WAN interface.
IP Mask Display the subnet mask address of the WAN interface.
IPv6 Address (Link) Display the IPv6 address of the WAN interface.
Default Gateway Display the gateway address of the WAN interface.
Primary DNS Display the specified primary DNS setting.
Secondary DNS Display the specified secondary DNS setting.
Wireless LAN-------
Vigor2130 Series User’s Guide
100
MAC Address Display the MAC address of the wireless LAN.
Device Type Display the device type used for wireless LAN.
SSID Display the SSID of the router.
Channel Display the channel that wireless LAN used.
Manufacturer Display the manufacturer of the disk.
Model Display the model of the disk.
Size Display the storage size of the USB diskette.
Status Display current status of the USB diskette.
3
3
.
.
1
1
0
0
.
.
2
2
T
T
R
R
0
0
6
6
9
9
Vigor router with TR-069 is available for matching with VigorACS server. Such page
provides VigorACS and CPE settings under TR-069 protocol. All the settings configured here
is for CPE to be controlled and managed with VigorACS server. Users need to type URL,
username and password for the VigorACS server that such device will be connected. However
URL, username and password under CPE client are fixed that users cannot change it. The
default CPE username and password are "vigor" and "password". You will need it when you
configure VigorACS server.
ACS Settings
Such data must be typed according to the ACS (
Auto
Configuration Server) you want to link. Please refer
to VigorACS user’s manual for detailed information.
URL - Type the URL for VigorACS server.
If the connected CPE needs to be authenticated, please
set URL as the following and type username and
password for VigorACS server:
http://{IP address of
VigorACS}:8080/ACSServer/services/ACSServlet
If the connected CPE does not need to be authenticated
Vigor2130 Series User’s Guide
101
please set URL as the following:
http://{IP address of
VigorACS}:8080/ACSServer/services/UnAuthACSServ
let
Username/Password - Type username and password for
ACS Server for authentication. For example, if you want
to use such CPE with VigorACS, you can type as the
following:
Username: acs
Password: password
CPE Settings
Such information is useful for Auto Configuration
Server.
Enable/Disable – Allow/Deny the CPE Client to
connect with Auto Configuration Server.
Port – Sometimes, port conflict might be occurred.
To solve such problem, you might change port
number for CPE.
Periodic Inform Settings
Disable – The system will not send inform message to
ACS server.
Enable – The system will send inform message to ACS
server periodically (with the time set in the box of
interval time).
The default setting is Enable. Please set interval time or
schedule time for the router to send notification to CPE.
Or click Disable to close the mechanism of notification.
3
3
.
.
1
1
0
0
.
.
3
3
U
U
s
s
e
e
r
r
P
P
a
a
s
s
s
s
w
w
o
o
r
r
d
d
This page allows you to set new password for user operation.
Old Password Type in the old password. The factory default setting for
password is blank.
New Password Type in new password in this filed.
Confirm New Password Type in the new password again.
When you click OK, the login window will appear. Please use the new password to access
into the web configurator again.
Vigor2130 Series User’s Guide
102
3
3
.
.
1
1
0
0
.
.
4
4
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
B
B
a
a
c
c
k
k
u
u
p
p
B
B
a
a
c
c
k
k
u
u
p
p
t
t
h
h
e
e
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
Follow the steps below to backup your configuration.
1. Go to System Maintenance >> Configuration Backup. The following windows will be
popped-up, as shown below.
2. Type a key arbitrarily for encrypting the file. Keep the key in mind. You will need it
whenever you want to restore such file. Click Backup button to get into the following
dialog. Click Save button to open another dialog for saving configuration as a file.
3. In Save As dialog, the default filename is config.cfg. You could give it another name by
yourself.
Vigor2130 Series User’s Guide
103
4. Click Save button, the configuration will download automatically to your computer as a
file named config.cfg.
The above example is using Windows platform for demonstrating examples. The Mac or
Linux platform will appear different windows, but the backup function is still available.
Note: Backup for Certification must be done independently. The Configuration Backup
does not include information of Certificate.
R
R
e
e
s
s
t
t
o
o
r
r
e
e
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
1. Go to System Maintenance >> Configuration Backup. The following windows will be
popped-up, as shown below.
2. Click Browse button to choose the correct configuration file for uploading to the router.
Click Restore button and wait for few seconds, the following picture will tell you that the
restoration procedure is successful.
Note: If the file you want to restore has been encrypted, you will be asked to type the
encrypted key before clicking Restore.
Vigor2130 Series User’s Guide
104
3
3
.
.
1
1
0
0
.
.
5
5
S
S
y
y
s
s
l
l
o
o
g
g
/
/
M
M
a
a
i
i
l
l
A
A
l
l
e
e
r
r
t
t
SysLog function is provided for users to monitor router. There is no bother to directly get into
the Web Configurator of the router or borrow debug equipments.
Enable (Syslog Access…) Check the box to activate function of syslog.
Router Name Type a name of this device.
Server IP Address The IP address of the Syslog server.
Destination Port Type a port for the Syslog protocol.
Log Level Choose the severity level for the system log entry.
Enable (Mail Alert…) Check the box to activate function of mail alert.
Send a test e-mail Make a simple test for the e-mail address specified in this
page. Please assign the mail address first and click this
button to execute a test for verify the mail address is
available or not.
SMTP Server The IP address of the SMTP server.
Mail To Assign a mail address for sending mails out.
Mail From Assign a path for receiving the mail from outside.
User Name Type the user name for authentication.
Password Type the password for authentication.
Enable E-mail Alert Check the box of User Login to send alert message to the
e-mail box while the router detecting the item(s) you
specify here.
Vigor2130 Series User’s Guide
105
Click OK to save these settings.
For viewing the Syslog, please do the following:
1. Just set your monitor PC’s IP address in the field of Server IP Address
2. Install the Router Tools in the Utility within provided CD. After installation, click on the
Router Tools>>Syslog from program menu.
3. From the Syslog screen, select the router you want to monitor. Be reminded that in
Network Information, select the network adapter used to connect to the router.
Otherwise, you won’t succeed in retrieving information from the router.
Vigor2130 Series User’s Guide
106
3
3
.
.
1
1
0
0
.
.
6
6
T
T
i
i
m
m
e
e
a
a
n
n
d
d
D
D
a
a
t
t
e
e
It allows you to specify where the time of the router should be inquired from.
Current System Time Click Inquire Time to get the current time.
Time Zone Select the time zone where the router is located.
Add NTP server Click the button to add a new NTP server.
Delete Click this button to remove an NTP server.
Click OK to save these settings.
Vigor2130 Series User’s Guide
107
3
3
.
.
1
1
0
0
.
.
7
7
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
This page allows you to manage the settings for access control, access list, port setup, and
SMP setup. For example, as to management access control, the port number is used to
send/receive SIP message for building a session. The default value is 5060 and this must
match with the peer Registrar when making VoIP calls.
Enable
HTTP/HTTPS/SSH/ICMP
Ping/FTP/TELNET
Enable the checkbox to allow system administrators to
login from the Internet. There are several servers
provided by the system to allow you managing the router
from Internet. Check the box(es) to specify.
Enable SNMP
Check it to enable such service.
Manager Host IP – Set one host as the manager to
execute SNMP function. Type the IP address to specify
the certain host.
Access List You could specify that the system administrator can only
login from a specific host or network defined in the list. A
maximum of three IPs/subnet masks is allowed.
List IP - Indicate an IP address allowed to login to the
router.
Subnet Mask - Represent a subnet mask allowed to login to
the router.
Vigor2130 Series User’s Guide
108
3
3
.
.
1
1
0
0
.
.
8
8
R
R
e
e
b
b
o
o
o
o
t
t
S
S
y
y
s
s
t
t
e
e
m
m
The Web Configurator may be used to restart your router for using current configuration.
Click Reboot System from System Maintenance to open the following page.
Click OK. The router will take 5 seconds to reboot the system.
Note: When the system pops up Reboot System web page after you configure web settings,
please click OK to reboot your router for ensuring normal operation and preventing
unexpected errors of the router in the future.
3
3
.
.
1
1
0
0
.
.
9
9
F
F
i
i
r
r
m
m
w
w
a
a
r
r
e
e
U
U
p
p
g
g
r
r
a
a
d
d
e
e
Before upgrading your router firmware, you need to install the Router Tools. The Firmware
Upgrade Utility is included in the tools. The following web page will guide you to upgrade
firmware by using an example. Note that this example is running over Windows OS
(Operating System).
Download the newest firmware from DrayTek's web site or FTP site. The DrayTek web site is
www.draytek.com (or local DrayTek's web site) and FTP site is ftp.draytek.com.
Click Maintenance>> Firmware Upgrade to launch the Firmware Upgrade Utility.
Click Browse.. to locate the newest firmware and click Upgrade. During the process of
upgrade, do not turn off your router.
Vigor2130 Series User’s Guide
109
4
A
A
d
d
m
m
i
i
n
n
M
M
o
o
d
d
e
e
O
O
p
p
e
e
r
r
a
a
t
t
i
i
o
o
n
n
This chapter will guide users to execute advanced (full) configuration through admin mode
operation.
1. Open a web browser on your PC and type http://192.168.1.1. The window will ask for
typing username and password.
2. Please type “admin/admin” on Username/Password for administration operation.
Now, the Main Screen will appear. Be aware that “Admin mode” will be displayed on the
bottom left side.
4
4
.
.
1
1
W
W
A
A
N
N
Quick Start Wizard offers user an easy method to quick setup the connection mode for the
router. Moreover, if you want to adjust more settings for different WAN modes, please go to
Internet Access group.
B
B
a
a
s
s
i
i
c
c
s
s
o
o
f
f
I
I
n
n
t
t
e
e
r
r
n
n
e
e
t
t
P
P
r
r
o
o
t
t
o
o
c
c
o
o
l
l
(
(
I
I
P
P
)
)
N
N
e
e
t
t
w
w
o
o
r
r
k
k
IP means Internet Protocol. Every device in an IP-based Network including routers, print
server, and host PCs, needs an IP address to identify its location on the network. To avoid
address conflicts, IP addresses are publicly registered with the Network Information Centre
(NIC). Having a unique IP address is mandatory for those devices participated in the public
network but not in the private TCP/IP local area networks (LANs), such as host PCs under the
management of a router since they do not need to be accessed by the public. Hence, the NIC
has reserved certain addresses that will never be registered publicly. These are known as
private IP addresses, and are listed in the following ranges:
From 10.0.0.0 to 10.255.255.255
From 172.16.0.0 to 172.31.255.255
From 192.168.0.0 to 192.168.255.255
Vigor2130 Series User’s Guide
110
W
W
h
h
a
a
t
t
a
a
r
r
e
e
P
P
u
u
b
b
l
l
i
i
c
c
I
I
P
P
A
A
d
d
d
d
r
r
e
e
s
s
s
s
a
a
n
n
d
d
P
P
r
r
i
i
v
v
a
a
t
t
e
e
I
I
P
P
A
A
d
d
d
d
r
r
e
e
s
s
s
s
As the router plays a role to manage and further protect its LAN, it interconnects groups of
host PCs. Each of them has a private IP address assigned by the built-in DHCP server of the
Vigor router. The router itself will also use the default private IP address: 192.168.1.1 to
communicate with the local hosts. Meanwhile, Vigor router will communicate with other
network devices through a public IP address. When the data flow passing through, the
Network Address Translation (NAT) function of the router will dedicate to translate
public/private addresses, and the packets will be delivered to the correct host PC in the local
area network. Thus, all the host PCs can share a common Internet connection.
G
G
e
e
t
t
Y
Y
o
o
u
u
r
r
P
P
u
u
b
b
l
l
i
i
c
c
I
I
P
P
A
A
d
d
d
d
r
r
e
e
s
s
s
s
f
f
r
r
o
o
m
m
I
I
S
S
P
P
In ADSL deployment, the PPP (Point to Point)-style authentication and authorization is
required for bridging customer premises equipment (CPE). Point to Point Protocol over
Ethernet (PPPoE) connects a network of hosts via an access device to a remote access
concentrator or aggregation concentrator. This implementation provides users with significant
ease of use. Meanwhile it provides access control, billing, and type of service according to
user requirement.
When a router begins to connect to your ISP, a serial of discovery process will occur to ask for
a connection. Then a session will be created. Your user ID and password is authenticated via
PAP or CHAP with RADIUS authentication system. And your IP address, DNS server, and
other related information will usually be assigned by your ISP.
N
N
e
e
t
t
w
w
o
o
r
r
k
k
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
o
o
n
n
b
b
y
y
3
3
G
G
U
U
S
S
B
B
M
M
o
o
d
d
e
e
m
m
For 3G mobile communication through Access Point is popular more and more, Vigor router
adds the function of 3G network connection for such purpose. By connecting 3G USB Modem
to the USB port of Vigor router, it can support HSDPA/UMTS/EDGE/GPRS/GSM and the
future 3G standard (HSUPA, etc). Vigor router with 3G USB Modem allows you to receive
3G signals at any place such as your car or certain location holding outdoor activity and share
the bandwidth for using by more people. Users can use four LAN ports on the router to access
Internet. Also, they can access Internet via SuperG wireless function of Vigor router, and
enjoy the powerful firewall, bandwidth management, VPN, VoIP features of Vigor router.
After connecting into the router, 3G USB Modem will be regarded as the second WAN port.
However, the original Ethernet WAN still can be used and Load-Balance can be done in the
router. Besides, 3G USB Modem also can be used as backup device. Therefore, when WAN is
not available, the router will use 3.5G for supporting automatically. The supported 3G USB
Modem will be listed on DrayTek web site. Please visit www.draytek.com for more detailed
information.
Below shows the menu items for WAN.
Vigor2130 Series User’s Guide
111
4
4
.
.
1
1
.
.
1
1
I
I
n
n
t
t
e
e
r
r
n
n
e
e
t
t
A
A
c
c
c
c
e
e
s
s
s
s
This page allows you to set WAN configuration with different modes. Use the Connection
Type drop down list to choose one of the WAN modes. The corresponding page will be
displayed.
S
S
t
t
a
a
t
t
i
i
c
c
For static IP mode, you usually receive a fixed public IP address or a public subnet, namely
multiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a
Cable service provider will offer a fixed public IP, while a DSL service provider will offer a
public subnet. If you have a public subnet, you could assign an IP address or many IP address
to the WAN interface.
To use Static as the accessing protocol of the internet, please choose Static mode from
Connection Type drop down menu. The following web page will be shown.
Vigor2130 Series User’s Guide
112
IP Address Type the IP address.
Subnet Mask Type the subnet mask.
Gateway IP Address Type the gateway IP address.
Primary DNS Server You must specify a DNS server IP address here because your
ISP should provide you with usually more than one DNS Server.
If your ISP does not provide it, the router will automatically
apply default DNS Server IP address: 198.95.1.1 to this field.
Secondary DNS Server You can specify secondary DNS server IP address here because
your ISP often provides you more than one DNS Server. If your
ISP does not provide it, the router will automatically apply
default secondary DNS Server IP address: 4.2.2.1 to this field.
Mode Such function allows you to verify whether network connection
is alive or not through ARP Detect or Ping Detect. Choose ARP
Detect or Ping Detect for the system to execute for WAN
detection.
Ping IP If you choose Ping Detect as detection mode, you have to type
IP address in this field for pinging.
Clone MAC Address It is available when the box of Enable is checked. Click Clone
MAC Address. The result will be displayed in the field of
MAC Address.
After finishing all the settings here, please click OK to activate them.
Vigor2130 Series User’s Guide
113
D
D
H
H
C
C
P
P
DHCP allows a user to obtain an IP address automatically from a DHCP server on the Internet.
If you choose DHCP mode, the DHCP server of your ISP will assign a dynamic IP address for
your router automatically. It is not necessary for you to assign any setting,
Router Name Type in a name for the router. It must be the same as the name
used in Syslog.
Mode Such function allows you to verify whether network connection
is alive or not through ARP Detect or Ping Detect. Choose ARP
Detect or Ping Detect for the system to execute for WAN
detection.
Ping IP If you choose Ping Detect as detection mode, you have to type
IP address in this field for pinging.
Clone MAC Address It is available when the box of Enable is checked. Click Clone
MAC Address. The result will be displayed in the field of
MAC Address.
After finishing all the settings here, please click OK to activate them.
Vigor2130 Series User’s Guide
114
P
P
P
P
P
P
o
o
E
E
To choose PPPoE as the accessing protocol of the internet, please select PPPoE from the
Internet Access menu. The following web page will be shown.
Username Type in the username provided by ISP in this field.
Password Type in the password provided by ISP in this field.
Redial Policy If you want to connect to Internet all the time, you can choose
Always On. Otherwise, choose Connect on Demand.
Idle Time Out Set the timeout for breaking down the Internet after passing
through the time without any action. When you choose Connect
on Demand, you have to type value here.
MTU Size It means Max Transmit Unit for packet. The default setting is
1442.
Mode Such function allows you to verify whether network connection
is alive or not through ARP Detect or Ping Detect. Choose ARP
Detect or Ping Detect for the system to execute for WAN
detection.
Ping IP If you choose Ping Detect as detection mode, you have to type
IP address in this field for pinging.
Enable/Disable Click Enable for activating this function. If you click Disable,
this function will be closed and all the settings that you adjusted
in this page will be invalid.
Clone MAC Address It is available when the box of Enable is checked. Click Clone
MAC Address. The result will be displayed in the field of
MAC Address.
Vigor2130 Series User’s Guide
115
After finishing all the settings here, please click OK to activate them.
P
P
P
P
T
T
P
P
/
/
L
L
2
2
T
T
P
P
To use PPTP/L2TP as the accessing protocol of the internet, please choose PPTP/L2TP from
Connection Type drop down menu. The following web page will be shown.
Username Type in the username provided by ISP in this field.
Password Type in the password provided by ISP in this field.
Server Address Type in the IP address for PPTP /L2TP server.
WAN IP Network Settings You can choose Static IP or DHCP as WAN IP network setting.
IP Address Type the IP address if you choose Static IP as the WAN IP
network setting.
Subnet Mask Type the subnet mask if you chose Static IP as the WAN IP.
Primary DNS Server You must specify a DNS server IP address here because your
ISP should provide you with usually more than one DNS Server.
If your ISP does not provide it, the router will automatically
apply default DNS Server IP address: 194.109.6.66 to this field.
Secondary DNS Server You can specify secondary DNS server IP address here because
your ISP often provides you more than one DNS Server. If your
ISP does not provide it, the router will automatically apply
default secondary DNS Server IP address: 194.98.0.1 to this
field.
Vigor2130 Series User’s Guide
116
Redial Policy If you want to connect to Internet all the time, you can choose
Always On. Otherwise, choose Connect on Demand and
Idle Time Out Set the timeout for breaking down the Internet after passing
through the time without any action. When you choose Connect
on Demand, you have to type value here.
MTU Size It means Max Transmit Unit for packet. The default setting is
1442.
Clone MAC Address It is available when the box of Enable is checked. Click Clone
MAC Address. The result will be displayed in the field of
MAC Address.
After finishing all the settings here, please click OK to activate them.
3
3
G
G
U
U
S
S
B
B
M
M
o
o
d
d
e
e
m
m
If your router connects to a 3G modem and you want to access Internet via 3G modem, choose
3G as connection type and type the required information in this web page.
SIM PIN code Type PIN code of the SIM card that will be used to access
Internet.
Modem Initial String1/2 Such value is used to initialize USB modem. Please use the
default value. If you have any question, please contact to your
ISP.
APN Name
APN means Access Point Name which is provided and
required by some ISPs.
Vigor2130 Series User’s Guide
117
Modem Dial String Such value is used to dial through USB mode. Please use the
default value. If you have any question, please contact to your
ISP.
PPP Username Type the PPP username (optional).
PPP Password Type the PPP password (optional).
Clone MAC Address It is available when the box of Enable is checked. Click Clone
MAC Address. The result will be displayed in the field of
MAC Address.
After finishing all the settings here, please click OK to activate them.
4
4
.
.
1
1
.
.
2
2
P
P
o
o
r
r
t
t
s
s
Ports page is used to change the setting for WAN port. You can set or reset the following
items. All of them are described in detail below.
Port It displays current network interface.
Link It displays current connection status. Green light means the
WAN connection is successful.
Current It displays current speed that the router uses.
Speed Configured You can use the drop down list to choose the required speed for
the router. If you have no idea in configuring speed, simple use
the default setting, Auto.
Flow Control If flow control is enabled by checking Configured box, both
parties can send PAUSE frame to the transmitting device(s) if
the receiving port is too busy to handle. If not, there will be no
flow control in the port. It drops the packet if too much to
handle.
Current Rx: indicates whether pause frames on the port are
obeyed.
Vigor2130 Series User’s Guide
118
Current Tx: indicates whether pause frames on the port are
transmitted.
Maximum Frame This module offers 1518~9600 (Bytes) length to make the long
packet for data transmission.
Excessive Collision Mode There are two modes for you to choose when excessive
collision happened in half-duplex condition.
Discard - It determines whether the MAC drops frames after an
excessive collision has occurred. If yes, a frame is dropped after
excessive collision. This is IEEE Standard 802.3 half-duplex
flow control operation.
Restart - It determines whether the MAC retransmits frames
after an excessive collision has occurred. If set, a frame is not
dropped after excessive collisions, but the backoff sequence is
restarted. This is a violation of IEEE Standard 802.3, but is
useful in non-dropping half-duplex flow control operation.
Power Control The Configured column allows for changing the power savings
mode parameters per port.
Disabled: All power savings mechanisms disabled.
ActiPHY: Link down power savings enabled.
PerfectReach: Link up power savings enabled.
Enabled: Both link up and link down power savings enabled.
Refresh Click this button to refresh the information for WAN port.
After finishing all the settings here, please click OK to activate them.
4
4
.
.
1
1
.
.
3
3
3
3
G
G
B
B
a
a
c
c
k
k
u
u
p
p
This page is used to setup 3G backup function. If you enable 3G backup, make sure your
WAN connection type is not in 3G mode. When the WAN connection is broken, router will
try to keep the connection with 3G mode. After WAN connection is recovered, router will
disconnect the 3G connection automatically.
Vigor2130 Series User’s Guide
119
SIM PIN code Type PIN code of the SIM card that will be used to access
Internet.
Modem Initial String1/2 Such value is used to initialize USB modem. Please use the
default value. If you have any question, please contact to your
ISP.
APN Name
APN means Access Point Name which is provided and
required by some ISPs.
Modem Dial String Such value is used to dial through USB mode. Please use the
default value. If you have any question, please contact to your
ISP.
PPP Username Type the PPP username (optional).
PPP Password Type the PPP password (optional).
Clone MAC Address It is available when the box of Enable is checked. Click Clone
MAC Address. The result will be displayed in the field of
MAC Address.
Vigor2130 Series User’s Guide
120
4
4
.
.
2
2
L
L
A
A
N
N
Local Area Network (LAN) is a group of subnets regulated and ruled by router. The design of
network structure is related to what type of public IP addresses coming from your ISP.
B
B
a
a
s
s
i
i
c
c
s
s
o
o
f
f
L
L
A
A
N
N
The most generic function of Vigor router is NAT. It creates a private subnet of your own. As
mentioned previously, the router will talk to other public hosts on the Internet by using public
IP address and talking to local hosts by using its private IP address. What NAT does is to
translate the packets from public IP address to private IP address to forward the right packets
to the right host and vice versa. Besides, Vigor router has a built-in DHCP server that assigns
private IP address to each local host. See the following diagram for a briefly understanding.
In some special case, you may have a public IP subnet from your ISP such as
220.135.240.0/24. This means that you can set up a public subnet or call second subnet that
each host is equipped with a public IP address. As a part of the public subnet, the Vigor router
will serve for IP routing to help hosts in the public subnet to communicate with other public
hosts or servers outside. Therefore, the router should be set as the gateway for public hosts.
Vigor2130 Series User’s Guide
121
W
W
h
h
a
a
t
t
i
i
s
s
R
R
o
o
u
u
t
t
i
i
n
n
g
g
I
I
n
n
f
f
o
o
r
r
m
m
a
a
t
t
i
i
o
o
n
n
P
P
r
r
o
o
t
t
o
o
c
c
o
o
l
l
(
(
R
R
I
I
P
P
)
)
Vigor router will exchange routing information with neighboring routers using the RIP to
accomplish IP routing. This allows users to change the information of the router such as IP
address and the routers will automatically inform for each other.
W
W
h
h
a
a
t
t
i
i
s
s
S
S
t
t
a
a
t
t
i
i
c
c
R
R
o
o
u
u
t
t
e
e
When you have several subnets in your LAN, sometimes a more effective and quicker way for
connection is the Static routes function rather than other method. You may simply set rules to
forward data from one specified subnet to another specified subnet without the presence of
RIP.
W
W
h
h
a
a
t
t
a
a
r
r
e
e
V
V
i
i
r
r
t
t
u
u
a
a
l
l
L
L
A
A
N
N
s
s
a
a
n
n
d
d
R
R
a
a
t
t
e
e
C
C
o
o
n
n
t
t
r
r
o
o
l
l
You can group local hosts by physical ports and create up to 4 virtual LANs. To manage the
communication between different groups, please set up rules in Virtual LAN (VLAN) function
and the rate of each.
Vigor2130 Series User’s Guide
122
4
4
.
.
2
2
.
.
1
1
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
This page provides you the general settings for LAN.
Click LAN to open the LAN settings page and choose General Setup.
IP Address Type in private IP address for connecting to a local private
network (Default: 192.168.1.1).
Subnet Mask Type in an address code that determines the size of the network.
(Default: 255.255.255.0/ 24)
Enable DHCP DHCP stands for Dynamic Host Configuration Protocol. The
router by factory default acts a DHCP server for your network
so it automatically dispatch related IP settings to any local user
configured as a DHCP client. It is highly recommended that you
leave the router enabled as a DHCP server if you do not have a
DHCP server for your network.
You can configure the router to serve as a DHCP server for the
2nd subnet. Check the box to enable DHCP server setting.
Start IP Address Enter a value of the IP address pool for the DHCP server to start
with when issuing IP addresses. If the 2nd IP address of your
router is 220.135.240.1, the starting IP address must be
220.135.240.2 or greater, but smaller than 220.135.240.254.
IP Pool Counts Enter the number of IP addresses in the pool. The maximum is
10. For example, if you type 3 and the 2nd IP address of your
router is 220.135.240.1, the range of IP address by the DHCP
server will be from 220.135.240.2 to 220.135.240.11.
Lease Time It allows you to set the leased time for the specified PC.
Force DNS manual setting Force router to use DNS servers in this page instead of DNS
servers given by the Internet Access server (PPPoE, PPTP,
L2TP or DHCP server).
Primary IP Address You must specify a DNS server IP address here because your
ISP should provide you with usually more than one DNS Server.
If your ISP does not provide it, the router will automatically
apply default DNS Server IP address: 194.109.6.66 to this field.
Vigor2130 Series User’s Guide
123
Secondary IP Address You can specify secondary DNS server IP address here because
your ISP often provides you more than one DNS Server. If your
ISP does not provide it, the router will automatically apply
default secondary DNS Server IP address: 194.98.0.1 to this
field.
The default DNS Server IP address can be found via Online
Status:
If both the Primary IP and Secondary IP Address fields are left
empty, the router will assign its own IP address to local users as
a DNS proxy server and maintain a DNS cache.
If the IP address of a domain name is already in the DNS cache,
the router will resolve the domain name immediately. Otherwise,
the router forwards the DNS query packet to the external DNS
server by establishing a WAN (e.g. DSL/Cable) connection.
After finishing all the settings here, please click OK to activate them.
4
4
.
.
2
2
.
.
2
2
P
P
o
o
r
r
t
t
s
s
Ports page is used to change the setting for LAN ports. You can set or reset the following
items. All of them are described in detail below.
Port It displays current network interface.
Link It displays current connection status. Green light means the
LAN connection is successful.
Current It displays current speed that the router uses.
Speed Configured It can set the speed and duplex of the port. You can use the drop
down list to choose the required speed for the router. If you
have no idea in configuring speed, simple use the default setting,
Vigor2130 Series User’s Guide
124
Auto.
Flow Control If flow control is enabled by checking Configured box, both
parties can send PAUSE frame to the transmitting device(s) if
the receiving port is too busy to handle. If not, there will be no
flow control in the port. It drops the packet if too much to
handle.
Current Rx: indicates whether pause frames on the port are
obeyed.
Current Tx: indicates whether pause frames on the port are
transmitted.
Maximum Frame This module offers 1518~9600 (Bytes) length to make the long
packet for data transmission.
Excessive Collision Mode There are two modes for you to choose when excessive
collision happened in half-duplex condition.
Discard - It determines whether the MAC drops frames after an
excessive collision has occurred. If yes, a frame is dropped after
excessive collision. This is IEEE Standard 802.3 half-duplex
flow control operation.
Restart - It determines whether the MAC retransmits frames
after an excessive collision has occurred. If set, a frame is not
dropped after excessive collisions, but the backoff sequence is
restarted. This is a violation of IEEE Standard 802.3, but is
useful in non-dropping half-duplex flow control operation.
Power Control The Configured column allows for changing the power savings
mode parameters per port.
Disabled: All power savings mechanisms disabled.
ActiPHY: Link down power savings enabled.
PerfectReach: Link up power savings enabled.
Enabled: Both link up and link down power savings enabled.
Refresh Click this button to refresh the information for LAN ports.
After finishing all the settings here, please click OK to activate them.
Vigor2130 Series User’s Guide
125
4
4
.
.
2
2
.
.
3
3
M
M
A
A
C
C
A
A
d
d
d
d
r
r
e
e
s
s
s
s
T
T
a
a
b
b
l
l
e
e
This page allows you to set timeouts for entries in dynamic MAC Table and configure the
static MAC table here.
Disable Automatic Aging Stop the MAC table aging timer, the learned MAC address will
not age out automatically. The default setting is enabled. Check
the box to disable this function if required.
Age Time Delete a MAC address idling for a period of time from the
following MAC Table, which will not affect static MAC
address. Range of MAC Address Aging Time is 10-1000000
seconds. The default Aging Time is 300 seconds.
MAC Table Learning List the port members which apply dynamic learning
mechanism or not.
Auto - Enable this port MAC address dynamic learning
mechanism.
Disable - Disable this port MAC address dynamic learning
mechanism, only support static MAC address setting.
Secure - Disable this port MAC address dynamic learning
mechanism and copy the dynamic learning packets to CPU.
Static MAC Table Config.. Specify static MAC address with VLAN ID to apply aging
configuration.
Delete - Click the button to remove the VLAN setting.
VLAN ID - Specify the interface for the port members.
MAC Address - It is a six-byte long Ethernet hardware address
and usually expressed by hex and separated by hyphens. For
example, 00 – 40 - C7 - D6 – 00 – 02.
WAN/LAN1~4 - Check the port to apply this VLAN setting.
To add a new static MAC entry, click Add new static entry. A new entry will be shown as
follows. Choose VLAN ID and type a new MAC address. Next, specify port member for this
table. Finally, click OK to save the changes.
Vigor2130 Series User’s Guide
126
4
4
.
.
2
2
.
.
4
4
V
V
L
L
A
A
N
N
Virtual LAN function provides you a very convenient way to manage hosts by grouping them
based on the physical port. You can also manage the in/out rate of each port. Go to LAN page
and select VLAN. The following page will appear. VLAN function is enabled in default.
Add New Private VLAN Click this button to add a new private VLAN. The router allows
you to add up to 4 VLAN.
To add or remove a VLAN, please refer to the following example.
1. VLAN 1 is consisted of hosts linked to P1 ~ P4.
2. After checking the box to enable VLAN function, you will check the table according to
the needs as shown below.
Vigor2130 Series User’s Guide
127
3. To remove VLAN, click the Delete button for the one you want to remove and click OK
to save the results.
4
4
.
.
2
2
.
.
5
5
M
M
o
o
n
n
i
i
t
t
o
o
r
r
P
P
o
o
r
r
t
t
It is used to monitor the traffic of the network. For example, we assume that LAN1 and LAN2
are Monitor Port and Monitor ingress Port respectively, thus, the traffic received by LAN2
will be copied to LAN1 for monitoring.
Enable Monitor Port Check to enable this function.
Monitor Port Click the one of the LAN ports to specify it for monitoring.
Monitor ingress port Check to set up the port(s) for being monitored. It only
monitors the packets received by the port you set up.
Monitor egress port Check to set up the port(s) for being monitored. It only
monitors the packets transmitted by the port you set up.
4
4
.
.
2
2
.
.
6
6
S
S
t
t
a
a
t
t
i
i
c
c
R
R
o
o
u
u
t
t
e
e
Go to LAN to open setting page and choose Static Route.
Index The number (1 to 10) under Index displays current static router.
Vigor2130 Series User’s Guide
128
Destination Address Display the destination address of the static route.
Status Display the status of the static route.
Add Click it to add a new static route.
A
A
d
d
d
d
S
S
t
t
a
a
t
t
i
i
c
c
R
R
o
o
u
u
t
t
e
e
s
s
t
t
o
o
P
P
r
r
i
i
v
v
a
a
t
t
e
e
a
a
n
n
d
d
P
P
u
u
b
b
l
l
i
i
c
c
N
N
e
e
t
t
w
w
o
o
r
r
k
k
s
s
Here is an example of setting Static Route in Main Router so that user A and B locating in
different subnet can talk to each other via the router. Assuming the Internet access has been
configured and the router works properly:
z use the Main Router to surf the Internet.
z create a private subnet 192.168.10.0 using an internal Router A (192.168.1.2)
z create a public subnet 211.100.88.0 via an internal Router B (192.168.1.3).
z have set Main Router 192.168.1.1 as the default gateway for the Router A 192.168.1.2.
Before setting Static Route, user A cannot talk to user B for Router A can only forward
recognized packets to its default gateway Main Router.
1. Click the LAN - Static Route and click Add. Check the Enable box. Please add a static
route as shown below, which regulates all packets destined to 192.168.10.0 will be
forwarded to 192.168.1.2. Click OK.
Vigor2130 Series User’s Guide
129
2. Return to Static Route page. Click Add again to add another static route as show below,
which regulates all packets destined to 211.100.88.0 will be forwarded to 192.168.1.3.
3. Verify current routing table.
4
4
.
.
2
2
.
.
7
7
B
B
i
i
n
n
d
d
I
I
P
P
t
t
o
o
M
M
A
A
C
C
This function is used to bind the IP and MAC address in LAN to have a strengthening control
in network. When this function is enabled, all the assigned IP and MAC address binding
together cannot be changed. If you modified the binding IP or MAC address, it might cause
you not access into the Internet.
Click LAN and click Bind IP to MAC to open the setup page.
Vigor2130 Series User’s Guide
130
Enable Click this radio button to invoke this function. However, IP/MAC
which is not listed in IP Bind List also can connect to Internet.
Disable Click this radio button to disable this function. All the settings on
this page will be invalid.
Strict Bind Click this radio button to block the connection of the IP/MAC
which is not listed in IP Bind List.
ARP Table This table is the LAN ARP table of this router. The information for
IP and MAC will be displayed in this field. Each pair of IP and
MAC address listed in ARP table can be selected and added to IP
Bind List by clicking Add below
.
Add and Edit IP Address – Type the IP address that will be used for the
specified MAC address.
Mac Address – Type the MAC address that is used to bind with
the assigned IP address.
Refresh It is used to refresh the ARP table. When there is one new PC
added to the LAN, you can click this link to obtain the newly ARP
table information.
IP Bind List It displays a list for the IP bind to MAC information.
Add It allows you to add the one you choose from the ARP table or the
IP/MAC address typed in Add and Edit to the table of IP Bind
List.
Edit It allows you to edit and modify the selected IP address and MAC
address that you create before.
Remove You can remove any item listed in IP Bind List. Simply click and
select the one, and click Remove. The selected item will be
removed from the IP Bind List.
Note: Before you select Strict Bind, you have to bind one set of IP/MAC address for one
PC. If not, no one of the PCs can access into Internet. And the web configurator of the router
might not be accessed.
4
4
.
.
3
3
N
N
A
A
T
T
Usually, the router serves as an NAT (Network Address Translation) router. NAT is a
mechanism that one or more private IP addresses can be mapped into a single public one.
Public IP address is usually assigned by your ISP, for which you may get charged. Private IP
addresses are recognized only among internal hosts.
When the outgoing packets destined to some public server on the Internet reach the NAT
router, the router will change its source address into the public IP address of the router, select
the available public port, and then forward it. At the same time, the router shall list an entry in
a table to memorize this address/port-mapping relationship. When the public server response,
the incoming traffic, of course, is destined to the router’s public IP address and the router will
do the inversion based on its table. Therefore, the internal host can communicate with external
host smoothly.
The benefit of the NAT includes:
z Save cost on applying public IP address and apply efficient usage of IP address.
NAT allows the internal IP addresses of local hosts to be translated into one public IP
address, thus you can have only one IP address on behalf of the entire internal hosts.
Vigor2130 Series User’s Guide
131
z Enhance security of the internal network by obscuring the IP address. There are
many attacks aiming victims based on the IP address. Since the attacker cannot be aware
of any private IP addresses, the NAT function can protect the internal network.
On NAT page, you will see the private IP address defined in RFC-1918. Usually we use the
192.168.1.0/24 subnet for the router. As stated before, the NAT facility can map one or
more IP addresses and/or service ports into different specified services. In other words, the
NAT function can be achieved by using port mapping methods.
Below shows the menu items for NAT.
4
4
.
.
3
3
.
.
1
1
H
H
a
a
r
r
d
d
w
w
a
a
r
r
e
e
N
N
A
A
T
T
Hardware-base Acceleration Engine, also named Protocol Processing Engine API is the
function that Draytek provides to extremely speed up the NAT performance.
While the hardware acceleration mechanism is activated, most of the bandwidth usage will
be concentrated on the specific sessions which increase transmission speed to get ultimately
accelerated.
With Hardware NAT, LAN to WAN NAT throughput can be over 900M bps. But be sure that
your PC has Giga Ethernet and connect with CAT6 Ethernet cable.
4
4
.
.
3
3
.
.
2
2
O
O
p
p
e
e
n
n
P
P
o
o
r
r
t
t
s
s
Open Ports allows you to open a range of ports for the traffic of special applications.
Common application of Open Ports includes P2P application (e.g., BT, KaZaA, Gnutella,
WinMX, eMule and others), Internet Camera etc. Ensure that you keep the application
involved up-to-date to avoid falling victim to any security exploits.
To add a new open port, click Add new entry.
Vigor2130 Series User’s Guide
132
Name Specify the name for the defined network service.
Protocol Specify the transport layer protocol. It could be TCP, UDP and
TCP+UDP.
Start Port Specify the starting port number of the service offered by the
local host.
End Port (optional) Specify the ending port number of the service offered by the
local host.
Local Host Enter the private IP address of the local host.
Local Port (optional) If it is configured, the forwarded traffic is mapped to this port
on the local host.
Vigor2130 Series User’s Guide
133
4
4
.
.
3
3
.
.
3
3
D
D
M
M
Z
Z
H
H
o
o
s
s
t
t
As mentioned above, Port Redirection can redirect incoming TCP/UDP or other traffic on
particular ports to the specific private IP address/port of host in the LAN. However, other IP
protocols, for example Protocols 50 (ESP) and 51 (AH), do not travel on a fixed port. Vigor
router provides a facility DMZ Host that maps ALL unsolicited data on any protocol to a
single host in the LAN. Regular web surfing and other such Internet activities from other
clients will continue to work without inappropriate interruption. DMZ Host allows a defined
internal user to be totally exposed to the Internet, which usually helps some special
applications such as Netmeeting or Internet Games etc.
The security properties of NAT are somewhat bypassed if you set up DMZ host. We suggest
you to add additional filter rules or a secondary firewall.
Click DMZ Host to open the following page:
Enable Check to enable the DMZ Host function.
DMZ IP Enter the private IP address of the DMZ host, or click Choose
PC to specify a suitable one.
Vigor2130 Series User’s Guide
134
4
4
.
.
4
4
F
F
i
i
r
r
e
e
w
w
a
a
l
l
l
l
B
B
a
a
s
s
i
i
c
c
s
s
f
f
o
o
r
r
F
F
i
i
r
r
e
e
w
w
a
a
l
l
l
l
While the broadband users demand more bandwidth for multimedia, interactive applications,
or distance learning, security has been always the most concerned. The firewall of the Vigor
router helps to protect your local network against attack from unauthorized outsiders. It also
restricts users in the local network from accessing the Internet. Furthermore, it can filter out
specific packets that trigger the router to build an unwanted outgoing connection.
D
D
e
e
n
n
i
i
a
a
l
l
o
o
f
f
S
S
e
e
r
r
v
v
i
i
c
c
e
e
(
(
D
D
o
o
S
S
)
)
D
D
e
e
f
f
e
e
n
n
s
s
e
e
The DoS Defense functionality helps you to detect and mitigate the DoS attack. The attacks
are usually categorized into two types, the flooding-type attacks and the vulnerability attacks.
The flooding-type attacks will attempt to exhaust all your system's resource while the
vulnerability attacks will try to paralyze the system by offending the vulnerabilities of the
protocol or operation system.
The DoS Defense function enables the Vigor router to inspect every incoming packet based on
the attack signature database. Any malicious packet that might duplicate itself to paralyze the
host in the secure LAN will be strictly blocked and a Syslog message will be sent as warning, if
you set up Syslog server.
Also the Vigor router monitors the traffic. Any abnormal traffic flow violating the pre-defined
parameter, such as the number of thresholds, is identified as an attack and the Vigor router will
activate its defense mechanism to mitigate in a real-time manner.
Below shows the menu items for Firewall.
4
4
.
.
4
4
.
.
1
1
D
D
o
o
S
S
D
D
e
e
f
f
e
e
n
n
s
s
e
e
Click Firewall and click DoS Defense to open the setup page. Storm control for the switch is
configured on this page.
Frame Type Set the Unicast storm rate control, multicast storm rate control,
and a broadcast storm rate control for your router.
Status Check this box to enable storm control status for the frame type.
Rate The unit is packet per second (pps). Use the drop down list to
set the rate for data transmission. The rate is 2^n, where n is
equal to or less than 15, or "No Limit". The unit of the rate can
be either pps (packets per second) or kpps (kilopackets per
Vigor2130 Series User’s Guide
135
second). The configuration indicates the permitted packet rate
for unicast, multicast, or broadcast traffic across the switch.
4
4
.
.
4
4
.
.
2
2
P
P
o
o
r
r
t
t
s
s
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
This page is used to configure the ACL (Access Control List) parameters for each port. These
parameters will affect data packets received on a port unless the data packets match a specific
ACE (Access Control Entry).
Port There is one WAN port and 4 LAN ports in Vigor2130. Here
each port will be configured with different ID, action, rate
limiter ID, port copy and etc.
Action Select whether forwarding is permitted ("Allow") or denied
("Deny"). The default value is "Allow".
Rate Limiter ID Select a rate limiter to apply to this port. Available settings
include Disabled, and 1 to 10. The default value is Disabled.
Counter Counts the number of frames that match this Access Control
Entry (ACE).
Refresh Click this button to refresh the number of the counter
immediately.
Vigor2130 Series User’s Guide
136
Clear Click this button to clear the number of the counter on this
page.
R
R
a
a
t
t
e
e
L
L
i
i
m
m
i
i
t
t
e
e
r
r
I
I
D
D
Configure the rate limiter for the ACL (Access Control List) of the router. Please click Rate
Limiter ID link to access into the following page.
Rate Limiter ID Rate limiter ID will be applied to WAN port and LAN port.
Please specify a rate number for each ID. The default setting is
“1”(packet per second).
Rate Define the rate by choosing from the following drop down list.
Vigor2130 Series User’s Guide
137
4
4
.
.
4
4
.
.
3
3
A
A
c
c
c
c
e
e
s
s
s
s
C
C
o
o
n
n
t
t
r
r
o
o
l
l
L
L
i
i
s
s
t
t
This page can define which kind of packet can access the router. The packet can be defined
with input port, Frame type, Rate, MAC type, VLAN ID, tag and etc.. For IPv4, we can also
define the protocol type, source IP and destination IP.
A
A
d
d
d
d
i
i
n
n
g
g
a
a
N
N
e
e
w
w
A
A
c
c
c
c
e
e
s
s
s
s
C
C
o
o
n
n
t
t
r
r
o
o
l
l
P
P
r
r
o
o
f
f
i
i
l
l
e
e
Click to add a new specific session limitation onto the list.
Define which port the packet from.
ACE Configuration Ingress Port – define which port the packet coming from. The
policy IDs are defined in Firewall>>Port Configuration. Each
Policy ID might have more than one port grouped.
Frame Type - Such option differs according to the selection
you choose, we will explain it in detailed later.
Action – it means the session limitation for this access control
Vigor2130 Series User’s Guide
138
list will be applied to if matching with the rule defined in this
page.
Rate Limiter - Select a rate limiter to apply to this port.
Available settings include Disabled, and 1 to 10. The default
value is Disabled. Click the Rate Limiter link to configure
different rates for each ID.
D
D
e
e
t
t
a
a
i
i
l
l
e
e
d
d
E
E
x
x
p
p
l
l
a
a
n
n
a
a
t
t
i
i
o
o
n
n
f
f
o
o
r
r
F
F
r
r
a
a
m
m
e
e
T
T
y
y
p
p
e
e
Frame Type selection will lead different options for configuration.
z Choose Ethernet Type as the Frame Type, you will get Ethernet Type Parameters
option as the following:
Ethernet Type Filter Choose Any to set the parameter with any value set by the
router automatically or choose Specific to specify certain
value (the range is 0x0000 to 0xFFFF).
z Choose ARP as the Frame Type, you will get ARP Parameters option as the following:
Vigor2130 Series User’s Guide
139
ARP/RARP Choose the ARP/RARP that you want to filter.
Request/Reply Choose the request or replay that you want to filter.
Sender IP Filter Specify the sender IP filter for this ACE.
Choose Any to filter all of the packets.
Choose Host to filter the packets from the host with the
address typed in Sender IP Address filed.
Choose Network to filter the packets within the network
defined in Sender IP Address and Sender IP Mask
fields.
Sender IP Address Type the Sender IP Address here. This option is available
when you choose Host or Network as Sender IP Filter.
Sender IP Mask Type the Sender IP Mask here. This option is available
only when you choose Network as Sender IP Filter.
Target IP Filter Specify the target IP filter for this specific ACE.
Choose Any to filter all of the packets.
Choose Host to filter the packets from the host with the
address typed in Target IP Address filed.
Choose Network to filter the packets within the network
defined in Target IP Address and Target IP Mask fields.
Vigor2130 Series User’s Guide
140
Target IP Address Type the Target IP Address here. This option is available
when you choose Host or Network as Target IP Filter.
Target IP Mask Type the Target IP Mask here. This option is available
only when you choose Network as Target IP Filter.
ARP SMAC Match Specify whether frames/packets can meet the action
according to the sender hardware address field (SHA)
settings.
0: means sender hardware address is not equal to the
SMAC address.
1: means sender hardware address is equal to the SMAC
address.
Any: means any value is allowed.
RARP DMAC Match Specify whether frames can hit the action according to
their target hardware address field (THA) settings.
0: means target hardware address is not equal to the
SMAC address.
1: means s target hardware address is equal to the SMAC
address.
Any: means any value is allowed.
IP/Ethernet Length Specify whether frames/packets can meet the action
according to the ARP/RARP hardware address length
(HLN) and protocol address length (PLN) settings.
0: means ARP/RARP frames/packets where the hardware
address length is equal to Ethernet (0x06) and the protocol
address length is equal to IPv4 (0x04) must not match this
entry.
1: means ARP/RARP frames/packets where the hardware
address length is equal to Ethernet (0x06) and the protocol
address length is equal to IPv4 (0x04) must match this
entry.
Any: Any value is allowed
IP Specify whether frames/packets can meet the action
according to their ARP/RARP hardware address space
(HRD) settings.
Vigor2130 Series User’s Guide
141
0: ARP/RARP frames where the hardware address space is
equal to Ethernet (1) must not match this entry.
1: ARP/RARP frames where the hardware address space is
equal to Ethernet (1) must match this entry.
Any: Any value is allowed.
Ethernet Specify whether frames can hit the action according to
their ARP/RARP protocol address space (PRO) settings.
0: ARP/RARP frames where the protocol address space is
equal to IP (0x800) must not match this entry.
1: ARP/RARP frames where the protocol address space is
equal to IP (0x800) must match this entry.
Any: Any value is allowed.
z Choose IPv4 as the Frame Type. You will see IP Parameters on the bottom of the page.
If you choose ICMP as IP Protocol Filter, you will get the page as the following:
Source IP Specify the Source IP filter for this ACE.
Any: No source IP filter is specified.
Host: Source IP filter is set to Host. Specify the source IP
address in the Source IP Address field that appears.
Network: Source IP filter is set to Network. Specify the
source IP address and source IP mask in the Source IP
Address and Source IP Mask fields that appear.
Source IP Address Type the Source IP Address here. This option is available
when you choose Host or Network as Source IP.
Source IP Mask Type the Source IP Mask here. This option is available
only when you choose Network as source Source IP.
Vigor2130 Series User’s Guide
142
Dest IP Filter Specify the destination IP filter for this ACE.
Any: No destination IP filter is specified.
Host: Destination IP filter is set to Host. Specify the
destination IP address in the Dest IP Address field that
appears.
Network: Destination IP filter is set to Network. Specify
the destination IP address and destination IP mask in the
DIP Address and Dest IP Mask fields that appear.
Dest IP Address Type the Dest IP Address here. This option is available
when you choose Host or Network as destination Dest IP.
Dest IP Mask Type the Dest IP Mask here. This option is available only
when you choose Network as destination Dest IP.
ICMP Type Filter Specify the ICMP filter for this ACE.
Any: No ICMP filter is specified.
Specific: If you want to filter a specific ICMP filter with
this ACE, you can enter a specific ICMP value. A field for
entering an ICMP value appears.
ICMP Type Value If you choose Specific as ICMP Type Filter, you have to
type the ICMP Type Value manually. The allowed range is
0 to 255. A frame meeting this ACE matches this ICMP
value.
ICMP Code Filter Specify the ICMP code filter for this ACE.
Any: No ICMP code filter is specified (ICMP code filter
status is "don't-care").
Specific: If you want to filter a specific ICMP code filter
with this ACE, you can enter a specific ICMP code value.
A field for entering an ICMP code value appears.
ICMP Code Value If you choose Specific as ICMP Code Filter, you have to
type the ICMP Type Value manually. The allowed range is
0 to 255. A frame meeting this ACE matches this ICMP
value.
z Choose IPv4 as the Frame Type. You will see IP Parameters on the bottom of the page.
If you choose UDP as IP Protocol Filter, you will get the page as the following:
Vigor2130 Series User’s Guide
143
Source IP Specify the source IP filter for this ACE.
Any: No source IP filter is specified.
Host: Source IP filter is set to Host. Specify the source IP
address in the Source IP Address field that appears.
Network: Source IP filter is set to Network. Specify the
source IP address and source IP mask in the Source IP
Address and Source IP Mask fields that appear.
Source IP Address Type the Source IP Address here. This option is available
when you choose Host or Network as source Source IP.
Source IP Mask Type the Source IP Mask here. This option is available
only when you choose Network as source Source IP.
Dest IP Specify the destination IP filter for this ACE.
Any: No destination IP filter is specified.
Host: Destination IP filter is set to Host. Specify the
destination IP address in the destination IP Address field
that appears.
Network: Destination IP filter is set to Network. Specify
the destination IP address and destination IP mask in the
destination IP Address and destination IP Mask fields that
appear.
Dest IP Address Type the destination IP Address here. This option is
available when you choose Host or Network as
destination IP.
Dest IP Mask Type the DIP Mask here. This option is available only
when you choose Network as destination DIP.
Source Port Filter Specify the UDP port source filter for this ACE.
Any: No UDP source filter is specified.
Vigor2130 Series User’s Guide
144
Specific: If you want to filter a specific UDP source filter
with this ACE, you can enter a specific UDP source value.
A field for entering a UDP source value appears.
Range: If you want to filter a specific UDP source range
filter with this ACE, you can enter a specific UDP source
range value. A field for entering a UDP source port range
appears.
Source Port No. Type the value if you choose Specific as the Source Port
Filter. The allowed range is 0 to 65535. A frame meeting
this ACE matches this UDP source value.
Source Port Range Type the value if you choose Range as the Source Port
Filter. The allowed range is 0 to 65535. A frame meeting
this ACE matches this UDP source value.
Dest. Port Filter Specify the UDP port destination filter for this ACE.
Any: No UDP destination filter is specified.
Specific: If you want to filter a specific UDP destination
filter with this ACE, you can enter a specific UDP
destination value. A field for entering a UDP destination
value appears.
Range: If you want to filter a specific UDP destination
range filter with this ACE, you can enter a specific UDP
destination range value. A field for entering a UDP
destination port range appears.
Dest. Port No. Type the value if you choose Specific as the Dest. Port
Filter. The allowed range is 0 to 65535. A frame meeting
this ACE matches this UDP source value.
Dest. Port Range Type the value if you choose Range as the Dest. Port Filter.
The allowed range is 0 to 65535. A frame meeting this
ACE matches this UDP source value.
Vigor2130 Series User’s Guide
145
z Choose IPv4 as the Frame Type. You will see IP Parameters on the bottom of the page.
If you choose TCP as IP Protocol Filter, you will get the page as the following:
Source IP Specify the source IP filter for this ACE.
Any: No source IP filter is specified.
Host: Source IP filter is set to Host. Specify the source IP
address in the source IP Address field that appears.
Network: Source IP filter is set to Network. Specify the
source IP address and source IP mask in the source IP
Address and source IP Mask fields that appear.
Source IP Address Type the source IP Address here. This option is available
when you choose Host or Network as source source IP
filter.
Source IP Mask Type the SIP Mask here. This option is available only
when you choose Network as source IP filter.
Dest IP Filter Specify the destination IP filter for this ACE.
Any: No destination IP filter is specified.
Host: Destination IP filter is set to Host. Specify the
destination IP address in the destination IP Address field
that appears.
Network: Destination IP filter is set to Network. Specify
the destination IP address and destination IP mask in the
destination IP Address and destination IP Mask fields that
appear.
Dest IP Address Type the destination IP Address here. This option is
available when you choose Host or Network as
destination IP filter.
Dest IP Mask Type the destination IP Mask here. This option is available
only when you choose Network as destination IP filter.
Vigor2130 Series User’s Guide
146
Source Port Filter Specify the TCP port source filter for this ACE.
Any: No TCP source filter is specified.
Specific: If you want to filter a specific TCP source filter
with this ACE, you can enter a specific TCP source value.
A field for entering a TCP source value appears.
Range: If you want to filter a specific TCP source range
filter with this ACE, you can enter a specific TCP source
range value. A field for entering a TCP source port range
appears.
Source Port No. Type the value if you choose Specific as the Source Port
Filter. The allowed range is 0 to 65535. A frame meeting
this ACE matches this TCP source value.
Source Port Range Type the value if you choose Range as the Source Port
Filter. The allowed range is 0 to 65535. A frame meeting
this ACE matches this TCP source value.
Dest. Port Filter Specify the TCP port destination filter for this ACE.
Any: No TCP destination filter is specified.
Specific: If you want to filter a specific TCP destination
filter with this ACE, you can enter a specific TCP
destination value. A field for entering a TCP destination
value appears.
Range: If you want to filter a specific TCP destination
range filter with this ACE, you can enter a specific TCP
destination range value. A field for entering a TCP
destination port range appears.
Dest. Port No. Type the value if you choose Specific as the Dest. Port
filter. The allowed range is 0 to 65535. A frame meeting
this ACE matches this TCP source value.
Dest. Port Range Type the value if you choose Range as the Dest. Port filter.
The allowed range is 0 to 65535. A frame meeting this
ACE matches this TCP source value.
TCP FIN Specify the TCP "No more data from sender" (FIN) value
for this ACE.
0: TCP frames where the FIN field is set must not be able
to match this entry.
1: TCP frames where the FIN field is set must be able to
match this entry.
Any: Any value is allowed.
Vigor2130 Series User’s Guide
147
TCP SYN Specify the TCP "Synchronize sequence numbers" (SYN)
value for this ACE.
0: TCP frames where the SYN field is set must not be able
to match this entry.
1: TCP frames where the SYN field is set must be able to
match this entry.
Any: Any value is allowed.
TCP RST Specify the TCP RST value for this ACE.
0: TCP frames where the RST field is set must not be able
to match this entry.
1: TCP frames where the RST field is set must be able to
match this entry.
Any: Any value is allowed.
TCP PSH Specify the TCP "Push Function" (PSH) value for this
ACE.
0: TCP frames where the PSH field is set must not be able
to match this entry.
1: TCP frames where the PSH field is set must be able to
match this entry.
Any: Any value is allowed.
TCP ACK Specify the TCP "Acknowledgment field significant"
(ACK) value for this ACE.
0: TCP frames where the ACK field is set must not be able
to match this entry.
1: TCP frames where the ACK field is set must be able to
match this entry.
Any: Any value is allowed
TCP URG Specify the TCP "Urgent Pointer field significant" (URG)
value for this ACE.
0: TCP frames where the URG field is set must not be able
to match this entry.
Vigor2130 Series User’s Guide
148
1: TCP frames where the URG field is set must be able to
match this entry.
Any: Any value is allowed.
z Choose IPv4 as the Frame Type. You will see IP Parameters on the bottom of the page.
If you choose Other as IP Protocol Filter, you will get the page as the following:
IP Protocol Value When "Other" is selected for the IP protocol filter, you can
enter a specific value here. The range is 0 to 255. The
default value is “255”.A frame meeting this ACE matches
this IP protocol value.
Source IP Specify the source IP filter for this ACE.
Any: No source IP filter is specified.
Host: Source IP filter is set to Host. Specify the source IP
address in the source IP Address field that appears.
Network: Source IP filter is set to Network. Specify the
source IP address and source IP mask in the source IP
Address and source IP Mask fields that appear.
Source IP Address Type the source IP Address here. This option is available
when you choose Host or Network as source IP Filter.
Source IP Mask Type the source IP Mask here. This option is available
only when you choose Network as source IP.
Dest IP Specify the destination IP filter for this ACE.
Any: No destination IP filter is specified.
Host: Destination IP filter is set to Host. Specify the
destination IP address in the destination IP Address field
that appears.
Network: Destination IP is set to Network. Specify the
destination IP address and destination IP mask in the
Vigor2130 Series User’s Guide
149
destination IP address and destination IP mask fields that
appear.
Dest IP Address Type the Dest IP Address here. This option is available
when you choose Host or Network as destination IP filter.
Dest IP Mask Type the Dest IP Mask here. This option is available only
when you choose Network as destination IP filter.
4
4
.
.
5
5
B
B
a
a
n
n
d
d
w
w
i
i
d
d
t
t
h
h
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
Below shows the menu items for Bandwidth Management.
4
4
.
.
5
5
.
.
1
1
S
S
e
e
s
s
s
s
i
i
o
o
n
n
L
L
i
i
m
m
i
i
t
t
A PC with private IP address can access to the Internet via NAT router. The router will
generate the records of NAT sessions for such connection. The P2P (Peer to Peer) applications
(e.g., BitTorrent) always need many sessions for procession and also they will occupy over
resources which might result in important accesses impacted. To solve the problem, you can
use limit session to limit the session procession for specified Hosts.
In the Bandwidth Management menu, click Sessions Limit to open the web page.
To activate the function of limit session, simply click Enable and set the default session limit.
Enable Click this button to activate the function of limit session.
Vigor2130 Series User’s Guide
150
Disable Click this button to close the function of limit session.
Default Sessions Limit Defines the default session number used for each computer in
LAN.
Limitation List Displays a list of specific limitations that you set on this web
page.
Start IP Defines the start LAN IP address for limit session.
End IP Defines the end LAN IP address for limit session.
Sessions Limit Defines the available session number for each host in the
specific range of IP addresses. If you do not set the session
number in this field, the system will use the default session limit
for the specific limitation you set for each index.
Add Adds the specific session limitation onto the list above.
Edit Allows you to edit the settings for the selected limitation.
Delete Remove the selected settings existing on the limitation list.
When you finish adding a new session limit, simply click OK. The following page will appear
for you to check.
4
4
.
.
5
5
.
.
2
2
B
B
a
a
n
n
d
d
w
w
i
i
d
d
t
t
h
h
L
L
i
i
m
m
i
i
t
t
The downstream or upstream from FTP, HTTP or some P2P applications will occupy large of
bandwidth and affect the applications for other programs. Please use Limit Bandwidth to make
the bandwidth usage more efficient.
In the Bandwidth Management menu, click Bandwidth Limit to open the web page.
Vigor2130 Series User’s Guide
151
To activate the function of limit bandwidth, simply click Enable and set the default or
user-defined upstream and downstream limit.
Disable
Click this button to close the function of limit bandwidth.
Enable
Click this button to activate the function of limit bandwidth.
Smart Bandwidth Limit
Click this radio button to configure the default limitation for
bandwidth.
When session number exceeds – type the value here as a
threshold to apply the smart bandwidth limit.
TX limit - Define the default speed of the upstream for
each computer in LAN.
RX limit - Define the default speed of the downstream for
each computer in LAN.
User-defined Bandwidth
Limit
Click this radio button to configure the user-defined
limitation for bandwidth.
Limitation List - Display a list of specific limitations that
you set on this web page.
Start IP - Bandwidth limit can be applied on certain IP
range. That’s, only the PCs within the range will be
influenced by the bandwidth limitation set here. Please
define the start IP address for the specific limitation.
End IP - Define the end IP address for the specific
limitation.
TX Limit - Define the limitation for the speed of the
upstream to be applied as specific limitation. If you do not
set the limit in this field, the system will use the default
speed for the specific limitation you set for each index.
RX Limit - Define the limitation for the speed of the
downstream to be applied as specific limitation. If you do
not set the limit in this field, the system will use the default
speed for the specific limitation you set for each index.
Add - Add the specific speed limitation onto the list above.
Edit - Allows you to edit the settings for the selected
limitation.
Delete - Remove the selected settings existing on the
limitation list.
When you finish adding a new bandwidth limit, simply click OK.
Vigor2130 Series User’s Guide
152
4
4
.
.
5
5
.
.
3
3
P
P
o
o
r
r
t
t
R
R
a
a
t
t
e
e
C
C
o
o
n
n
t
t
r
r
o
o
l
l
A policer can limit the bandwidth of received frames. It is located in front of the ingress queue.
And a shaper can limit the bandwidth of transmitted frames. It is located after the ingress
queues. This page allows you to configure the switch port rate limit for Policers and Shapers.
Port Represent LAN or WAN interface.
Policer Enabled Check this box to enable policer function.
Policer Rate(Rx) Type the number for policer function. The default value is 500.
It is restricted to 500-1000000 when the Policer Unit is set in
kbps, and it is restricted to 1-1000 when the Policer Unit is set
in Mbps.
Policer Unit Determine the unit (kbps/Mbps) for policer.
Shaper Enabled Check this box to enable shaper function.
Shaper Rate (Tx) Type the number for shaper function. The default value is 500.
It is restricted to 500-1000000 when the Shaper Unit is set in
kbps, and it is restricted to 1-1000 when the Shaper Unit is set
in Mbps.
Shaper Unit Determine the unit (kbps/Mbps) for shaper function.
4
4
.
.
5
5
.
.
4
4
Q
Q
o
o
S
S
C
C
o
o
n
n
t
t
r
r
o
o
l
l
L
L
i
i
s
s
t
t
Deploying QoS (Quality of Service) management to guarantee that all applications receive the
service levels required and sufficient bandwidth to meet performance expectations is indeed
one important aspect of modern enterprise network.
One reason for QoS is that numerous TCP-based applications tend to continually increase their
transmission rate and consume all available bandwidth, which is called TCP slow start. If
other applications are not protected by QoS, it will detract much from their performance in the
overcrowded network. This is especially essential to those are low tolerant of loss, delay or
jitter (delay variation).
Another reason is due to congestions at network intersections where speeds of interconnected
circuits mismatch or traffic aggregates, packets will queue up and traffic can be throttled back
to a lower speed. If there’s no defined priority to specify which packets should be discarded
(or in another term “dropped”) from an overflowing queue, packets of sensitive applications
mentioned above might be the ones to drop off. How this will affect application performance?
There are two components within Primary configuration of QoS deployment:
z Classification: Identifying low-latency or crucial applications and marking them for
high-priority service level enforcement throughout the network.
Vigor2130 Series User’s Guide
153
z Scheduling: Based on classification of service level to assign packets to queues and
associated service types
The basic QoS implementation in Vigor routers is to classify and schedule packets based on
the service type information in the IP header. For instance, to ensure the connection with the
headquarter, a teleworker may enforce an index of QoS Control to reserve bandwidth for
HTTPS connection while using lots of application at the same time.
One more larger-scale implementation of QoS network is to apply DSCP (Differentiated
Service Code Point) and IP Precedence disciplines at Layer 3. Compared with legacy IP
Precedence that uses Type of Service (ToS) field in the IP header to define 8 service classes,
DSCP is a successor creating 64 classes possible with backward IP Precedence compatibility.
In a QoS-enabled network, or Differentiated Service (DiffServ or DS) framework, a DS
domain owner should sign a Service License Agreement (SLA) with other DS domain owners
to define the service level provided toward traffic from different domains. Then each DS node
in these domains will perform the priority treatment. This is called per-hop-behavior (PHB).
The definition of PHB includes Expedited Forwarding (EF), Assured Forwarding (AF), and
Best Effort (BE). AF defines the four classes of delivery (or forwarding) classes and three
levels of drop precedence in each class.
Vigor routers as edge routers of DS domain shall check the marked DSCP value in the IP
header of bypassing traffic, thus to allocate certain amount of resource execute appropriate
policing, classification or scheduling. The core routers in the backbone will do the same
checking before executing treatments in order to ensure service-level consistency throughout
the whole QoS-enabled network.
However, each node may take different attitude toward packets with high priority marking
since it may bind with the business deal of SLA among different DS domain owners. It’s not
easy to achieve deterministic and consistent high-priority QoS traffic throughout the whole
network with merely Vigor router’s effort.
In the Bandwidth Management menu, click QoS Control List to open the web page.
Vigor2130 Series User’s Guide
154
QCE Type Display the type of that QCE (QoS Control Entries).
Type Value Display the value specified for the QCE.
Traffic Class Display the class of the data transmission for the QCE.
QoS Control List allows users to set up to five groups of QCL. Each QCL group can contain
12 QCE settings.
A
A
d
d
d
d
i
i
n
n
g
g
a
a
N
N
e
e
w
w
Q
Q
C
C
E
E
Click to add a new QCE onto this page. Different QCE type will bring out different web
settings.
z If you choose Ethernet Type as QCE Type, you have to type value for it and specify
traffic class from Low, Normal, Medium and High.
Vigor2130 Series User’s Guide
155
Ethernet Type Value Either 8~63 ASCII characters, such as 012345678(or 64
Hexadecimal digits leading by 0x, such as "0x321253abcde...").
z If you choose VLAN ID as QCE Type, you have to type the ID number for it and specify
traffic class from Low, Normal, Medium and High.
z If you choose TCP/UDP Port as QCE Type, you have to type the port number for it and
specify traffic class from Low, Normal, Medium and High.
TCP/UDP Port Click Single or Range. If you select Range, you have to type
in the starting port number and the end porting number on
the boxes below.
TCP/UDP Port Range Type in the starting port number and the end porting number
here if you choose Range as the type.
z If you choose DSCP as QCE Type, you have to type value for it and specify traffic class
from Low, Normal, Medium and High.
Vigor2130 Series User’s Guide
156
z If you choose ToS as QCE Type, you have to specify priority class from Low, Normal,
Medium and High.
z If you choose Tag Priority as QCE Type, you have to specify priority class from Low,
Normal, Medium and High.
E
E
d
d
i
i
t
t
i
i
n
n
g
g
a
a
Q
Q
C
C
E
E
Click to modify the settings of an existing QCE on this page.
M
M
o
o
v
v
i
i
n
n
g
g
U
U
p
p
/
/
D
D
o
o
w
w
n
n
a
a
Q
Q
C
C
E
E
Click and to move a QCE up and down.
Vigor2130 Series User’s Guide
157
D
D
e
e
l
l
e
e
t
t
i
i
n
n
g
g
a
a
Q
Q
C
C
E
E
To delete a QCE in the list, simply click of that one. It will be removed immediately.
4
4
.
.
5
5
.
.
5
5
P
P
o
o
r
r
t
t
s
s
P
P
r
r
i
i
o
o
r
r
i
i
t
t
y
y
This page allows you to configure QoS settings for each port. The classification is controlled
by a QCL (Quality Control List) that is assigned to each port. A QCL consists of an ordered
list of up to 12 QCEs (Quality Control Entry). Each QCE can be used to classify certain
frames to a specific QoS class. This classification can be based on parameters such as VLAN
ID, UDP/TCP port, IPv4/IPv6 DSCP or Tag Priority. Frames not matching any of the QCEs
are classified to the default QoS class for the port.
Port Indicate the interface for the physical port, WAN port, LAN
port and Wireless Port.
Default Class Use the drop down list to choose the priority for each port.
QCL Use the drop down list to choose the QCL number defined in
QoS Control List for the port.
Queuing Mode Use the drop down list to choose suitable mode.
Vigor2130 Series User’s Guide
158
Queue Weighted Use the drop down list to choose 1, 2, 4, or 8 as the queue
weighted number.
4
4
.
.
5
5
.
.
6
6
Q
Q
o
o
S
S
S
S
t
t
a
a
t
t
i
i
s
s
t
t
i
i
c
c
s
s
This page displays statistics for QoS setting. Click WAN/LAN link to check detailed
information for each interface.
Click WAN/LAN link to check detailed information for each interface.
Rx Packets Display the counting number of the packet received.
Vigor2130 Series User’s Guide
159
Rx Octets Display the total received bytes.
Rx Unicast Display the counting number of the received unicast packet.
Rx Broadcast Display the counting number of the received broadcast packet.
Rx Pause Display the counting number of the received pause packet.
RX 64 Bytes Display the number of 64-byte frames in good and bad packets
received.
RX 65-127 Bytes Display the number of 65 ~ 127-byte frames in good and bad
packets received.
RX 128-255 Bytes Display the number of 128 ~ 255-byte frames in good and bad
packets received.
RX 256-511 Bytes Display the number of 256 ~ 511-byte frames in good and bad
packets received.
RX 512-1023 Bytes Display the number of 512 ~ 1023-byte frames in good and bad
packets received.
RX 1024- 1526 Bytes Display the number of 1024-1522-byte frames in good and bad
packets received.
RX 1527 Bytes Display the number of 1527-byte frames in good and bad
packets received.
Rx Low Display the low queue counter of the packet received.
Rx Normal Display the normal queue counter of the packet received.
Rx Medium Display the medium queue counter of the packet received.
Rx High Display the high queue counter of the packet received.
Rx Drops Display the number of frames dropped due to the lack of
receiving buffer.
Rx CRC/Alignment Display the number of Alignment errors packets received.
Rx Undersize Display the number of short frames (<64 Bytes) with valid
CRC.
Rx Oversize Display the number of long frames (according to max_length
register) with valid CRC.
Rx Fragments Display the number of short frames (< 64 bytes) with invalid
CRC.
Rx Jabber Display the number of long frames (according to max_length
register) with invalid CRC.
Rx Filtered Display the filtered number of the packet received.
Tx Packets Display the the counting number of the packet transmitted.
Tx Octets Display the total transmitted bytes.
Tx Unicast Display the show the counting number of the transmitted
unicast packet.
Tx Multicast Display the show the counting number of the transmitted
multicast packet.
Tx Broadcast Display the counting number of the transmitted broadcast
packet.
Vigor2130 Series User’s Guide
160
Tx Pause Show the counting number of the transmitted pause packet.
Tx 64 Bytes Display the number of 64-byte frames in good and bad packets
transmitted.
Tx 65-127 Bytes Display the number of 65 ~ 127-byte frames in good and bad
packets transmitted.
Tx 128-255 Bytes Display the number of 128 ~ 255-byte frames in good and bad
packets transmitted.
Tx 256-511 Bytes Display the number of 256 ~ 511-byte frames in good and bad
packets transmitted.
Tx 512-1023 Bytes Display the number of 512 ~ 1023-byte frames in good and bad
packets transmitted.
Tx 1024- 1526 Bytes Display the number of 1024 ~ 1522-byt frames in good and bad
packets transmitted.
Tx 1527 Bytes: Display the number of 1527-byte frames in good and bad
packets transmitted.
Tx Low Display the low queue counter of the packet transmitted.
Tx Normal Display the normal queue counter of the packet transmitted.
Tx Medium Display the medium queue counter of the packet received.
Tx High Display the high queue counter of the packet received.
Tx Drops Display the number of frames dropped due to excessive
collision, late collision, or frame aging.
Tx lat/Exc.Coll. Display the number of Frames late collision or excessive
collision Error, which switch transmitted.
4
4
.
.
6
6
A
A
p
p
p
p
l
l
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s
Below shows the menu items for Applications.
4
4
.
.
6
6
.
.
1
1
D
D
y
y
n
n
a
a
m
m
i
i
c
c
D
D
N
N
S
S
The ISP often provides you with a dynamic IP address when you connect to the Internet via
your ISP. It means that the public IP address assigned to your router changes each time you
access the Internet. The Dynamic DNS feature lets you assign a domain name to a dynamic
WAN IP address. It allows the router to update its online WAN IP address mappings on the
specified Dynamic DNS server. Once the router is online, you will be able to use the
registered domain name to access the router or internal virtual servers from the Internet. It is
particularly helpful if you host a web server, FTP server, or other server behind the router.
Before you use the Dynamic DNS feature, you have to apply for free DDNS service to the
DDNS service providers. The router provides up to three accounts from three different DDNS
service providers. Basically, Vigor routers are compatible with the DDNS services supplied by
most popular DDNS service providers such as www.dyndns.org, www.no-ip.com,
Vigor2130 Series User’s Guide
161
www.dtdns.com, www.changeip.com, www.dynamic- nameserver.com. You should visit
their websites to register your own domain name for the router.
Enable Dynamic DNS Check this box to enable the current account.
DynDNS Service Select the service provider for the DDNS account.
Hostname Type in one domain name that you applied previously. Use the
drop down list to choose the desired domain.
Username Type in the login name that you set for applying domain.
Password Type in the password that you set for applying domain.
Check IP change every Set the interval for checking the information.
Force IP update every Force the router updates its information to DDNS server with
the interval set here.
Click OK button to activate the settings. You will see your setting has been saved.
4
4
.
.
6
6
.
.
2
2
S
S
c
c
h
h
e
e
d
d
u
u
l
l
e
e
The Vigor router has a built-in real time clock which can update itself manually or
automatically by means of Network Time Protocols (NTP). As a result, you can not only
schedule the router to dialup to the Internet at a specified time, but also restrict Internet access
to certain hours so that users can connect to the Internet only during certain hours, say,
business hours. The schedule is also applicable to other functions.
You have to set your time before set schedule. In System Maintenance>> Time and Date
menu, press Inquire Time button to set the Vigor router’s clock to current time of your PC.
The clock will reset once if you power down or reset the router. There is another way to set up
time. You can inquiry an NTP server (a time server) on the Internet to synchronize the router’s
clock. This method can only be applied when the WAN connection has been built up.
You can set up to 15 schedules. To add a schedule profile, please click Add.
Vigor2130 Series User’s Guide
162
Enable Check to enable the schedule.
Start Date Specify the starting date of the schedule.
Start Time Specify the starting time of the schedule.
Action Specify which action should be applied during the period of the
schedule.
WAN UP/DOWN – WAN connection will be activated /
inactivated based on the time schedule configured here.
WiFi UP/DOWN – Wireless Wi-Fi connection will be
activated / inactivated based on the time schedule configured
here.
VPN UP/DOWN - VPN connection will be activated /
inactivated based on the time schedule configured here.
Acts Specify how often the schedule will be applied
Once -The schedule will be applied just once
Routine /Weekday -Specify which days in one week should
perform the schedule.
Vigor2130 Series User’s Guide
163
4
4
.
.
6
6
.
.
3
3
I
I
G
G
M
M
P
P
S
S
n
n
o
o
o
o
p
p
i
i
n
n
g
g
IGMP snooping means multicast traffic will be forwarded to ports that have members of that
group. If you disable IGMP snooping, the system will make multicast traffic treated in the
same manner as broadcast traffic.
Snooping Enabled Check the box to enable this function.
Unregistered IPMC… Check the box to enable unregistered IPMC traffic flooding
Fast Leave Check the box to Fast Leave on the LAN port.
4
4
.
.
6
6
.
.
4
4
I
I
G
G
M
M
P
P
S
S
t
t
a
a
t
t
u
u
s
s
This page display current IGMP status.
V1~3 Reports Receive Display the number of Received V1 – V3 Reports.
V2 Leave Receive Display the number of Received V2 Leave.
Groups Display current
IGMP groups. Maximum number of group
for each VLAN can be set is 128.
Port Members Display the LAN ports in this group.
Refresh Click this button to refresh the page immediately.
Clear Click this button to clear the settings on this page.
Vigor2130 Series User’s Guide
164
4
4
.
.
6
6
.
.
5
5
U
U
P
P
n
n
P
P
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
The UPnP (Universal Plug and Play) protocol is supported to bring to network connected
devices the ease of installation and configuration which is already available for directly
connected PC peripherals with the existing Windows 'Plug and Play' system. For NAT routers,
the major feature of UPnP on the router is “NAT Traversal”. This enables applications inside
the firewall to automatically open the ports that they need to pass through a router. It is more
reliable than requiring a router to work out by itself which ports need to be opened. Further,
the user does not have to manually set up port mappings or a DMZ. UPnP is available on
Windows XP and the router provide the associated support for MSN Messenger to allow full
use of the voice, video and messaging features.
Enable UPnP Enable UPnP function. You have to type the download and
upload speed.
Download Speed
Enter the maximum sustained WAN download speed in
kilobits/second. Such information can be requested by
UPnP clients.
Upload Speed Enter the maximum sustained WAN upload speed in
kilobits/second. Such information can be requested by
UPnP clients.
After setting Enable UPnP setting, an icon of IP Broadband Connection on Router on
Windows XP/Network Connections will appear. The connection status and control status will
be able to be activated. The NAT Traversal of UPnP enables the multimedia features of your
applications to operate. This has to manually set up port mappings or use other similar
methods. The screenshots below show examples of this facility.
Vigor2130 Series User’s Guide
165
The UPnP facility on the router enables UPnP aware applications such as MSN Messenger to
discover what are behind a NAT router. The application will also learn the external IP address
and configure port mappings on the router. Subsequently, such a facility forwards packets from
the external ports of the router to the internal ports used by the application.
The reminder as regards concern about Firewall and UPnP
Can't work with Firewall Software
Enabling firewall applications on your PC may cause the UPnP function not working
properly. This is because these applications will block the accessing ability of some network
ports.
Security Considerations
Activating the UPnP function on your network may incur some security threats. You should
consider carefully these risks before activating the UPnP function.
¾ Some Microsoft operating systems have found out the UPnP weaknesses and hence
you need to ensure that you have applied the latest service packs and patches.
¾ Non-privileged users can control some router functions, including removing and
adding port mappings.
The UPnP function dynamically adds port mappings on behalf of some UPnP-aware
applications. When the applications terminate abnormally, these mappings may not be
removed.
Vigor2130 Series User’s Guide
166
4
4
.
.
6
6
.
.
6
6
W
W
a
a
k
k
e
e
O
O
n
n
L
L
A
A
N
N
A PC client on LAN can be woken up by the router it connects. When a user wants to wake up
a specified PC through the router, he/she must type correct MAC address of the specified PC
on this web page of Wake On LAN of this router.
In addition, such PC must have installed a network card supporting WOL function. By the
way, WOL function must be set as “Enable” on the BIOS setting.
Wake by Two types provide for you to wake up the binded IP. If you
choose Wake by MAC Address, you have to type the correct
MAC address of the host in MAC Address boxes. If you choose
Wake by IP Address, you have to choose the correct IP address.
IP Address The IP addresses that have been configured in LAN>>Bind IP
to MAC will be shown in this drop down list. Choose the IP
address from the drop down list that you want to wake up.
MAC Address Type any one of the MAC address of the binded PCs.
Wake Up Click this button to wake up the selected IP. See the following
figure. The result will be shown on the box.
4
4
.
.
7
7
V
V
P
P
N
N
a
a
n
n
d
d
R
R
e
e
m
m
o
o
t
t
e
e
A
A
c
c
c
c
e
e
s
s
s
s
A Virtual Private Network (VPN) is the extension of a private network that encompasses links
across shared or public networks like the Internet. In short, by VPN technology, you can send
data between two computers across a shared or public network in a manner that emulates the
properties of a point-to-point private link.
Below shows the menu items for VPN and Remote Access.
Vigor2130 Series User’s Guide
167
4
4
.
.
7
7
.
.
1
1
R
R
e
e
m
m
o
o
t
t
e
e
A
A
c
c
c
c
e
e
s
s
s
s
C
C
o
o
n
n
t
t
r
r
o
o
l
l
Enable the necessary VPN service as you need. If you intend to run a VPN server inside your
LAN, you should enable IPSec VPN Pass-through and specify an IP address to allow VPN
tunnel pass through.
Enable IPSec VPN Service
If this checkbox is checked, the system firewall will allow
VPN (IPSec) remote access from WAN side to the router.
Enable IPSec VPN
Pass-through (Server inside
your LAN)
If this checkbox is checked, the system firewall will allow
VPN (IPSec) remote access from WAN side to a VPN
device on the LAN. Type the IP address of the VPN
device in the field next to the checkbox.
Enable PPTP VPN Service
If this checkbox is checked, the system firewall will allow
VPN (PPTP) remote access from WAN side to the router.
IP Address range for PPTP client – Specify an IP
address pool for the local private network that will be
assigned to PPTP clients. Note the values given here
should not be the same as IP address range for DHCP
Client.
IP Address range for DHCP client – Display the range
of IP address assigned by DHCP server.
Enable PPTP VPN
Pass-through (Server inside
your LAN)
If this checkbox is checked, the system firewall will pass
VPN (PPTP) remote access from WAN side to a VPN
server in the LAN. Type the IP address of the VPN server
in the field next to the checkbox.
Vigor2130 Series User’s Guide
168
4
4
.
.
7
7
.
.
2
2
P
P
P
P
T
T
P
P
R
R
e
e
m
m
o
o
t
t
e
e
D
D
i
i
a
a
l
l
-
-
i
i
n
n
You can manage remote access by maintaining a table of remote user profile, so that users can
be authenticated to dial-in via VPN connection.
The router provides access accounts for dial-in users.
A
A
d
d
d
d
i
i
n
n
g
g
a
a
N
N
e
e
w
w
U
U
s
s
e
e
r
r
Click Add new user to open the following page.
Username Type a name for this user.
Full Name Type full name for this user.
Password Type the password for this user.
Password (again) Type the password again for confirmation.
Allow Disk Sharing Check this box to have the remote user share the disk
information.
Allow IPSEC/L2TP Check this box to let the remote user connecting to this
device through IPSEC/L2TP.
Allow PPTP Check this box to let the remote user connecting to this
device through PPTP.
Allow FTP Check this box to let the remote user connecting to FTP
server via this router.
Delete User Remove settings on current page and delete the user. This
button is not available for new configuration by pressing
Add a New User.
Vigor2130 Series User’s Guide
169
When you finish the settings, simply click OK to save the configuration. The new user will be
created and displayed on the page.
E
E
d
d
i
i
t
t
i
i
n
n
g
g
/
/
D
D
e
e
l
l
e
e
t
t
i
i
n
n
g
g
U
U
s
s
e
e
r
r
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
To edit a user, click the name link under Username to open the following page. Modify the
settings except Username and then click OK to save and exit it. If you want to remove such
user settings, simply click Delete User.
4
4
.
.
7
7
.
.
3
3
I
I
P
P
S
S
e
e
c
c
R
R
e
e
m
m
o
o
t
t
e
e
D
D
i
i
a
a
l
l
-
-
i
i
n
n
This page allows you to configure IPSec Site-to-Client settings.
Mobile VPN Type This usually applies to those are remote dial-in user or node
(LAN-to-LAN) which uses dynamic IP address and
Vigor2130 Series User’s Guide
170
IPSec-related VPN connections such as L2TP over IPSec and
IPSec tunnel.
Disabled – Ignore the configurations set in this page.
Dynamic VPN (IPSec) – Traffic between this subnet and the
client will travel through the VPN tunnel. If you choose this
type, please specify the IP address and subnet mask for local
network.
L2TP/IPSec –The range must not overlap the DHCP address
range (if enabled), and must allow for at least one IP address.
Example: 10.10.137.240-10.10.137.245. If you choose this type,
please specify the IP address range for L2TP/IPSec mode.
Authentication Shared secret – Type the shared secret manually and confirm it
again. IPSec remote dial-in clients will use the given secret.
Advanced Settings Phase 1 (IKE) - Negotiation of IKE parameters including
encryption, hash, Diffie-Hellman parameter values, and lifetime
to protect the following IKE exchange, authentication of both
peers using either a Pre-Shared Key or Digital Signature (x.509).
The peer that starts the negotiation proposes all its policies to
the remote peer and then remote peer tries to find a
highest-priority match with its policies.
Phase 2 (IPSec) - Negotiation IPSec security methods
including Authentication Header (AH) or Encapsulating
Security Payload (ESP) for the following IKE exchange and
Vigor2130 Series User’s Guide
171
mutual examination of the secure tunnel establishment.
4
4
.
.
7
7
.
.
4
4
R
R
e
e
m
m
o
o
t
t
e
e
D
D
i
i
a
a
l
l
-
-
i
i
n
n
S
S
t
t
a
a
t
t
u
u
s
s
You can find the summary table of all dial-in user status.
Client Display the name of the VPN IPSec/Mobile client.
Identity Display the remote ID of the VPN client.
Endpoint Display the IP address of the VPN client.
IKE Status Display the status of the phase 1 ISAKMP key exchange.
IKE Alg Display
the encryption and authentication algorithm used
during phase 1 of the VPN connection Establishment. The
algorithm is used during exchange of key exchange.
ESP Status Display the status of the phase 2 IPSec ESP key exchange.
ESP Alg Display the encryption and authentication algorithm used
during phase 2 of the VPN connection Establishment. This
algorithm is used for transporting data, and the choice will
affect the performance of the VPN tunnel.
User Name Display the dial-in user account.
Interface Display the connection name assigned by the router.
Remote IP Display IP address of remote client.
Login Time Display the system time that the user logs in.
Rx bytes Display the data total received for such client.
Tx bytes Display the data total transmitted for such client.
Auto-refresh Check this box to make the system refresh this page
automatically.
Refresh Click this button to refresh the page immediately.
Vigor2130 Series User’s Guide
172
4
4
.
.
7
7
.
.
5
5
L
L
A
A
N
N
t
t
o
o
L
L
A
A
N
N
Here you can manage LAN-to-LAN connections by maintaining a table of connection profiles.
You may set parameters including specified connection direction (dial-in or dial-out),
connection peer ID, connection type (VPN connection - including PPTP, IPSec Tunnel) and
corresponding security methods, etc.
The router supports 2 VPN tunnels simultaneously and provides up to 2 profiles. The
following figure shows the summary table.
Name Indicate the name of the LAN-to-LAN profile.
Endpoint Display the IP address of the VPN client.
IKE Status Display the status of the phase 1 ISAKMP key exchange.
IKE Alg Display
the encryption and authentication algorithm used
during phase 1 of the VPN connection Establishment. The
algorithm is used during exchange of key exchange.
ESP Status Display the status of the phase 2 IPSec ESP key exchange.
ESP Alg Display the encryption and authentication algorithm used
during phase 2 of the VPN connection Establishment. This
algorithm is used for transporting data, and the choice will
affect the performance of the VPN tunnel.
Vigor2130 Series User’s Guide
173
A
A
d
d
d
d
i
i
n
n
g
g
a
a
V
V
P
P
N
N
T
T
u
u
n
n
n
n
e
e
l
l
Click Add Tunnel to open the following page.
Enabled Check here to activate this tunnel.
Always On Check this box to make the WAN connection being activated
always.
Name Specify a name for this tunnel.
Remote IP Enter the IP address of the remote host that located at the
other-end of the VPN tunnel.
IKE phase 1 mode Select from Main mode and Aggressive mode. The ultimate
outcome is to exchange security proposals to create a protected
secure channel. Main mode is more secure than Aggressive
mode since more exchanges are done in a secure channel to set
up the IPSec session. However, the Aggressive mode is faster.
The default value in Vigor router is Main mode.
Pre-Shared Key Such field will be applicable when Pre-shared key is selected as
the Type for the authentication. Input 1-63 characters as
pre-shared key.
Vigor2130 Series User’s Guide
174
Confirm Pre-Shared key Such field will be applicable when Pre-shared key is selected as
the Type for the authentication. Input 1-63 characters as
pre-shared key again to confirm it.
Local Identity Local Identity is on behalf of the IP address while identity
authenticating with remote VPN server. The length of the ID is
limited to 47 characters.
Remote Identity This field defines the identity of the remote end.
Local Network / Mask Traffic between this subnet and the subnet specified in Remote
Network / Mask will travel through the VPN tunnel.
Remote Network / Mask Add a static route to direct all traffic destined to this Remote
Network IP Address/Remote Network Mask through the VPN
connection. For IPSec, this is the destination clients IDs of
phase 2 quick mode.
IKE Phase 1 proposal Propose the local available authentication schemes and
encryption algorithms to the VPN peers, and get its feedback to
find a match.
IKE Phase 2 proposal Propose the local available algorithms to the VPN peers, and
get its feedback to find a match.
Perfect Forward Secrecy The IKE Phase 1 key will be reused to avoid the computation
complexity in phase 2. The default value is inactive this
function.
Vigor2130 Series User’s Guide
175
4
4
.
.
8
8
W
W
i
i
r
r
e
e
l
l
e
e
s
s
s
s
L
L
A
A
N
N
This function is used for “n” models.
4
4
.
.
8
8
.
.
1
1
B
B
a
a
s
s
i
i
c
c
C
C
o
o
n
n
c
c
e
e
p
p
t
t
s
s
Over recent years, the market for wireless communications has enjoyed tremendous growth.
Wireless technology now reaches or is capable of reaching virtually every location on the
surface of the earth. Hundreds of millions of people exchange information every day via
wireless communication products. The Vigor “n” model, a.k.a. Vigor wireless router, is
designed for maximum flexibility and efficiency of a small office/home. Any authorized staff
can bring a built-in WLAN client PDA or notebook into a meeting room for conference
without laying a clot of LAN cable or drilling holes everywhere. Wireless LAN enables high
mobility so WLAN users can simultaneously access all LAN facilities just like on a wired
LAN as well as Internet access
The Vigor wireless routers are equipped with a wireless LAN interface compliant with the
standard IEEE 802.11n draft 2 protocol. To boost its performance further, the Vigor Router is
also loaded with advanced wireless technology to lift up data rate up to 300 Mbps*. Hence,
you can finally smoothly enjoy stream music and video.
Note:
* The actual data throughput will vary according to the network conditions and
environmental factors, including volume of network traffic, network overhead and
building materials.
In an Infrastructure Mode of wireless network, Vigor wireless router plays a role as an Access
Point (AP) connecting to lots of wireless clients or Stations (STA). All the STAs will share the
same Internet connection via Vigor wireless router. The General Settings will set up the
information of this wireless network, including its SSID as identification, located channel etc.
S
S
e
e
c
c
u
u
r
r
i
i
t
t
y
y
O
O
v
v
e
e
r
r
v
v
i
i
e
e
w
w
Real-time Hardware Encryption: Vigor Router is equipped with a hardware AES encryption
engine so it can apply the highest protection to your data without influencing user experience.
Complete Security Standard Selection: To ensure the security and privacy of your wireless
communication, we provide several prevailing standards on market.
Vigor2130 Series User’s Guide
176
WEP (Wired Equivalent Privacy) is a legacy method to encrypt each frame transmitted via
radio using either a 64-bit or 128-bit key. Usually access point will preset a set of four keys
and it will communicate with each station using only one out of the four keys.
WPA (Wi-Fi Protected Access), the most dominating security mechanism in industry, is
separated into two categories: WPA-personal or called WPA Pre-Share Key (WPA/PSK), and
WPA-Enterprise or called WPA/802.1x.
In WPA-Personal, a pre-defined key is used for encryption during data transmission. WPA
applies Temporal Key Integrity Protocol (TKIP) for data encryption while WPA2 applies AES.
The WPA-Enterprise combines not only encryption but also authentication.
Since WEP has been proved vulnerable, you may consider using WPA for the most secure
connection. You should select the appropriate security mechanism according to your needs.
No matter which security suite you select, they all will enhance the over-the-air data
protection and /or privacy on your wireless network. The Vigor wireless router is very flexible
and can support multiple secure connections with both WEP and WPA at the same time.
Below shows the menu items for Wireless LAN.
4
4
.
.
8
8
.
.
2
2
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
By clicking the General Setup, a new web page will appear so that you could configure the
SSID and the wireless channel.
Please refer to the following figure for more information.
Enable Wireless LAN Check the box to enable the wireless function.
Vigor2130 Series User’s Guide
177
SSID Broadcast Choose Show to make the SSID being seen by wireless clients.
Choose Hide to prevent from wireless sniffing and make it
harder for unauthorized clients or STAs to join your wireless
LAN.
SSID It means the identification of the wireless LAN. SSID can be
any text numbers or various special characters. The default
SSID is "DrayTek". We suggest you to change it.
Isolate
Check this box to make the wireless clients (stations) with
the same SSID not accessing for each other.
Wireless Mode Choose the wireless mode for this router. At present, only
802.11B/B/N mix is available.
Country Region Code It represents different country region code.
Use the drop down list to choose the one that fit the usage of
regulations locally.
Channel It means the channel of frequency of the wireless LAN. The
default channel is 11. You may switch channel if the selected
channel is under serious interference. If you have no idea of
choosing the frequency, please select Auto to let system
determine for you.
Tx Power Set the power percentage for transmission signal of access point.
The greater the value is, the higher intensity of the signal will
be.
Enable Green AP Such function is used to reduce the power consumption (Green
AP) for the access point. When there is no station connected,
the power consumption of access point will be reduced.
Encryption Select an appropriate encryption mode to improve the security
and privacy of your wireless data packets.
Each encryption mode will bring out different web page and ask
you to offer additional configuration.
W
W
i
i
r
r
e
e
l
l
e
e
s
s
s
s
S
S
e
e
c
c
u
u
r
r
i
i
t
t
y
y
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
For the security of your system, choose the proper encryption for data transmission. Different
encryption mode will bring out different setting encryption ways.
Vigor2130 Series User’s Guide
178
z None
The encryption mechanism is turned off.
z WEP
Accepts only WEP clients and the encryption key should be entered in WEP Key.
Default Key All wireless devices must support the same WEP
encryption bit size and have the same key.
Key1-Key4 Four keys can be entered here, but only one key can be
selected at a time. The format of WEP Key is restricted to
5 ASCII characters or 10 hexadecimal values in 64-bit
encryption level, or restricted to 13 ASCII characters or 26
hexadecimal values in 128-bit encryption level. The
allowed content is the ASCII characters from 33(!) to
126(~) except '#' and ',' .
Authentication Mode Choose OPEN or SHARED as the authentication mode.
OPEN: Set wireless to authentication open mode.
SHARED: Set wireless to authentication shared mode.
z WPA-PSK
Accepts only WPA clients and the encryption key should be entered in PSK. The WPA
encrypts each frame transmitted from the radio using the key, which either PSK
(Pre-Shared Key) entered manually in this field below or automatically negotiated via
802.1x authentication.
Vigor2130 Series User’s Guide
179
WPA Mode Select WPA, WPA2 or Auto as the type.
WPA Algorithm Select TKIP, AES or auto as the algorithm for WPA.
WPA Pre-Shared Key Either 8~63 ASCII characters, such as 012345678..(or 64
Hexadecimal digits leading by 0x, such as
"0x321253abcde...").
z WPA-RADIUS
The built-in RADIUS client feature enables the router to assist the remote dial-in user or
a wireless station and the RADIUS server in performing mutual authentication. It enables
centralized remote access authentication for network management.
Type The WPA encrypts each frame transmitted from the radio
using the key, which either PSK (Pre-Shared Key) entered
manually in this field below or automatically negotiated
via 802.1x authentication. Select WPA, WPA2 or Auto as
WPA mode.
Vigor2130 Series User’s Guide
180
WPA Algorithm Choose the WPA algorithm, TKIP, AES or Auto.
Server IP Address Enter the IP address of RADIUS server.
Destination Port The UDP port number that the RADIUS server is using.
The default value is 1812, based on RFC 2138.
Shared Secret The RADIUS server and client share a secret that is used
to authenticate the messages sent between them. Both
sides must be configured to use the same shared secret.
z WPS
WPS (Wi-Fi Protected Setup) provides easy procedure to make network connection
between wireless station and wireless access point (vigor router) with the encryption
of WPA and WPA2.
Configure via Push Button Click Start PBC to invoke Push-Button style WPS setup
procedure. The router will wait for WPS requests from
wireless clients about two minutes. The WPS LED on the
router will blink fast when WPS is in progress. It will
return to normal condition after two minutes. (You need to
setup WPS within two minutes)
Configure via Client PinCode Type the PIN code specified in wireless client you
wish to connect, and click Start PIN button. The WLAN
LED on the router will blink fast when WPS is in progress.
It will return to normal condition after two minutes. (You
need to setup WPS within two minutes.
It is the simplest way to build connection between wireless network clients and vigor
router. Users do not need to select any encryption mode and type any long encryption
passphrase to setup a wireless client every time. He/she only needs to press a button on
wireless client, and WPS will connect for client and router automatically.
Vigor2130 Series User’s Guide
181
Note: Such function is available for the wireless station with WPS supported.
There are two methods to do network connection through WPS between AP and Stations:
pressing the Start PBC button or using PIN Code.
On the side of Vigor 2130 series which served as an AP, press WPS button once on the
front panel of the router or click Start PBC on web configuration interface. On the side
of a station with network card installed, press Start PBC button of network card.
If you want to use PIN code, you have to know the PIN code specified in wireless client.
Then provide the PIN code of the wireless client you wish to connect to the vigor router.
Vigor2130 Series User’s Guide
182
4
4
.
.
8
8
.
.
3
3
A
A
c
c
c
c
e
e
s
s
s
s
C
C
o
o
n
n
t
t
r
r
o
o
l
l
For additional security of wireless access, the Access Control facility allows you to restrict
the network access right by controlling the wireless LAN MAC address of client. Only the
valid MAC address that has been configured can access the wireless LAN interface. By
clicking the Access Control, a new web page will appear, as depicted below, so that you
could edit the clients' MAC addresses to control their access rights (deny or allow).
Filter Type Choose the rule for the MAC addresses displayed in this
page.
Allow List – all the MAC address of wireless clients listed
here are allowed to do wireless connection.
Deny List – all the MAC address of wireless clients listed
here will be blocked.
Add a New Entry Add a new MAC address into the list.
Delete Delete the selected MAC address in the list. This button
will appear only an entry of MAC Address has been typed.
Cancel Give up the configuration.
OK Click it to save the configuration.
4
4
.
.
8
8
.
.
4
4
S
S
t
t
a
a
t
t
i
i
o
o
n
n
L
L
i
i
s
s
t
t
Station List provides the knowledge of connecting wireless clients now along with its status
code.
Vigor2130 Series User’s Guide
183
Index Display the number of the connecting client.
IP Address Display the WAN IP address for the connecting client.
MAC Address Display the MAC Address for the connecting client.
Connected Time Display the connection time for the connecting client.
Auto-refresh Check this box to force the system refreshing the table
automatically.
Refresh Click this button to refresh current page.
4
4
.
.
8
8
.
.
5
5
A
A
c
c
c
c
e
e
s
s
s
s
P
P
o
o
i
i
n
n
t
t
D
D
i
i
s
s
c
c
o
o
v
v
e
e
r
r
y
y
Vigor router can scan all regulatory channels and find working APs in the neighborhood.
Based on the scanning result, users will know which channel is clean for usage.
Note: During the scanning process (about 5 seconds), no client is allowed to connect to
Vigor.
The table will list channel, SSID, BSSID, Security and the Signal strength of working APs in
the neighborhood.
CH Display the channel for the scanned AP.
SSID Display the SSID of the scanned AP.
BSSID Display the MAC address of the scanned AP.
Security Display the encryption type of the scanned AP.
Signal Display the strength (in percentage) of the signal of the
scanned AP.
Scan It is used to discover all the connected AP. The results will
be shown on the box above this button.
Vigor2130 Series User’s Guide
184
4
4
.
.
9
9
U
U
S
S
B
B
A
A
p
p
p
p
l
l
i
i
c
c
a
a
t
t
i
i
o
o
n
n
USB diskette can be regarded as an FTP server. By way of Vigor router, clients on LAN can
access, write and read data stored in USB diskette. After setting the configuration in USB
Application, you can type the IP address of the Vigor router and username/password created
in USB Application>>FTP User Setting on the FTP client software. Thus, the client can use
the FTP site (USB diskette) through Vigor router.
4
4
.
.
9
9
.
.
1
1
U
U
S
S
B
B
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
This page will determine the number of concurrent FTP connection and default charset for
FTP server. At present, the Vigor router can support USB diskette with versions of FAT16 and
FAT32 only. Therefore, before connecting the USB diskette into the Vigor router, please make
sure the memory format for the USB diskette is FAT16 or FAT32. It is recommended for you
to use FAT32 for viewing the filename completely (FAT16 cannot support long filename).
Enable FTP Check this box to enable FTP connection.
Enable Disk Sharing Check this box to share the information on USB disk.
Workgroup Name Type the name for FTP users for accessing into FTP server
(USB diskette). Be aware that users cannot access into USB
diskette in anonymity. Later, you can open FTP client software
and type the username specified here for accessing into USB
storage diskette.
4
4
.
.
9
9
.
.
2
2
F
F
T
T
P
P
U
U
s
s
e
e
r
r
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
This page allows you to change user setting for USB storage disk. Before modifying settings
in this page, please insert a USB diskette and configure settings in User>>User
Configuration first. Otherwise, an error message will appear to warn you.
Click the name link under User Name to open the setting web page.
Vigor2130 Series User’s Guide
185
User Name It displays the username that user uses to login to the FTP
server.
Volume Select the proper volume for the connected USB diskette.
Home Folder It determines the range for the client to access into.
The user can enter a directory name in this field. Then, after
clicking OK, the router will create the specific/new folder in the
USB diskette. In addition, if the user types “/” here, he/she can
access into all of the disk folders and files in USB diskette.
Note: When write protect status for the USB diskette is ON,
you cannot type any new folder name in this field. Only “/” can
be used in such case.
Access Rule Select the access right for the USB diskette.
When you finish the settings, simply click OK to save the configuration.
4
4
.
.
9
9
.
.
3
3
D
D
i
i
s
s
k
k
S
S
t
t
a
a
t
t
u
u
s
s
This page can display current using status of the USB diskette. If you want to remove the
diskette from USB port in router, please check the box of Safely Remove Disk first. And then,
remove the USB diskette later.
Safely Remove Disk Check this box and then you can remove the USB diskette
safely.
Manufacturer Display the manufacturer of the disk.
Model Display the type of the disk.
Size Display the storage space of the diskette(s).
Free Capacity Display the free disk space of the diskette(s).
Status Display current usage status of the diskette(s)
Vigor2130 Series User’s Guide
186
Update Click this button to refresh the disk status.
4
4
.
.
9
9
.
.
4
4
D
D
i
i
s
s
k
k
S
S
h
h
a
a
r
r
e
e
s
s
This page can define the folder which will be shared while Samba File Sharing is enabled.
To add a new entry for disk sharing, please click Add a New Entry to open the following
page.
Share Name Type a name to be known by other computers in local network.
The name must not contain spaces or special characters.
Comment Type the brief description for the disk sharing. The words here
will be seen in Network Neighborhood on Windows client
computers
Volume Select the proper volume for the connected USB diskette.
Path It determines the range for the client to access into.
The user can enter a directory name in this field. Then, after
clicking OK, the router will create the specific/new folder in the
USB diskette. In addition, if the user types “/” here, he/she can
access into all of the disk folders and files in USB diskette.
Note: When write protect status for the USB diskette is ON,
you cannot type any new folder name in this field. Only “/” can
be used in such case.
Visible Check this box to make this USB diskette to be seen in Network
Neighborhood on Windows of clients in local network.
Access Rights Specify the access right and apply to all the wireless clients that
want to connect to the attached USB diskette.
Vigor2130 Series User’s Guide
187
All Users Read-only - everyone has read-only access to the
share disk.
All Users Read-write - everyone has read-write access to the
share disk.
Specific Users – Only specific user(s) can access into the share
disk.
4
4
.
.
1
1
0
0
I
I
P
P
v
v
6
6
4
4
.
.
1
1
0
0
.
.
1
1
I
I
P
P
v
v
6
6
W
W
A
A
N
N
S
S
e
e
t
t
u
u
p
p
This page defines the IPv6 connection types for WAN interface. Possible types contain
Link-Local only, Static IPv6, DHCPv6 and TSPC. Each type requires different parameter
settings.
L
L
i
i
n
n
k
k
-
-
L
L
o
o
c
c
a
a
l
l
O
O
n
n
l
l
y
y
Vigor2130 Series User’s Guide
188
Link-Local address is used for communicating with neighbouring nodes on the same link. It is
defined by the address prefix fe80::/10. You don't need to setup Link-Local address manually
for it is generated automatically according to your MAC Address.
IPv6 Address The least significant 64 bits are usually chosen as the interface
hardware address constructed in modified EUI-64 format.
Prefix Length Display the fixed value (64) for prefix length.
S
S
t
t
a
a
t
t
i
i
c
c
I
I
P
P
v
v
6
6
This type allows you to setup static IPv6 address for WAN.
IPv6 Address Type your IPv6 static IP here.
Prefix Length Type your IPv6 address prefix length here.
Gateway IPv6 Server Type your IPv6 gateway address here.
Primary DNS Server Type your IPv6 primary DNS Server address here.
Secondary DNS Server Type your IPv6 secondary DNS Server address here.
Vigor2130 Series User’s Guide
189
D
D
H
H
C
C
P
P
v
v
6
6
C
C
l
l
i
i
e
e
n
n
t
t
(
(
I
I
A
A
_
_
N
N
A
A
)
)
DHCPv6 client mode would use IA_NA option of DHCPv6 protocol to obtain IPv6 address
from server.
Primary DNS Server Type primary DNS Server address here.
Secondary DNS Server Type secondary DNS Server address here
D
D
H
H
C
C
P
P
v
v
6
6
C
C
l
l
i
i
e
e
n
n
t
t
(
(
I
I
A
A
_
_
P
P
D
D
)
)
DHCPv6 client mode would use IA_PA option of DHCPv6 protocol to obtain IPv6 prefix
from server.
T
T
S
S
P
P
C
C
Tunnel setup protocol client (TSPC) is an application which could help you to connect to IPv6
network easily.
Please make sure your IPv4 WAN connection is OK and apply one free account from hexage
(http://go6.net/4105/register.asp
) before you try to use TSPC for network connection. TSPC
would connect to tunnel broker and requests a tunnel according to the specifications inside the
configuration file. It gets a public IPv6 IP address and an IPv6 prefix from the tunnel broker
and then monitors the state of the tunnel in background.
After getting the IPv6 prefix and starting router advertisement daemon (RADVD), the PC
behind this router can directly connect to IPv6 the Internet.
Vigor2130 Series User’s Guide
190
Username Type the name obtained from the broker. “vigor2130” is a
default username applied from
http://go6.net/4105/register.asp
. It is suggested for you to
apply another username and password.
Password Type the password assigned with the user name.
Confirm Password Type the password again to make the confirmation.
Tunnel Broker Type the address for the tunnel broker IP, FQDN or an
optional port number.
Tunnel Mode IPv6-in-IPv4 Tunnel- Let the broker choose the tunnel
mode appropriate for the client.
IPv6-in-IPv4 (Native) - Request an IPv6 in IPv4 tunnel.
IPv6-in-IPv4 (NAT Traversal - Request an IPv6 in UDP
of IPv4 tunnel (for clients behind a NAT).
Auto-reconnect Delay After passing the time set here, the client will retry to
connect in case of failure or keepalive timeout.
0 means not retry.
Keepalive Yes – Keep the connection between TSPC and tunnel
broker always on. TSPC will send ping packet to make
sure the connection between both ends is normal.
No - The client will not send keepalives.
Keepalive_interval Type the time for the interval between two keepalive
messages transferring from the client to the broker.
Vigor2130 Series User’s Guide
191
Prefixlen Type the required prefix length for the client network.
If_prefix Display LAN interface name.
The name of the OS
interface that will be configured with the first 64 of
the received prefix from the broker and the router
advertisement daemon is started to advertise that
prefix on the if_prefix interface.
4
4
.
.
1
1
0
0
.
.
2
2
I
I
P
P
v
v
6
6
L
L
A
A
N
N
S
S
e
e
t
t
u
u
p
p
This page defines the IPv6 connection types for LAN interface. Possible types contain
DHCPv6 Server and RADVD. Each type requires different parameter settings.
IPv6 Address Type static IPv6 address for LAN.
IPv6 Link_local Address It is used for communicating with neighbouring nodes on
the same link. It is defined by the address prefix fe80::/10.
You don't need to setup Link-Local address manually for it
is generated automatically according to your MAC
Address.
Enable Autoconfiguration Check this box to enable the auto-configuration function
for IPv6 connection.
Configuration Type Vigor2130 provides 2 daemons for LAN side IPv6 address
configuration. One is RADVD(stateless) and the other is
DHCPv6 Server (Stateful).
DHCPv6 Server- DHCPv6 Server could assign IPv6
address to PC according to the Start/End IPv6 address
configuration.
IPv6 Start Address/IPv6 End Address- Type the start and
end address for IPv6 server.
Vigor2130 Series User’s Guide
192
RADVD - The router advertisement daemon (radvd) sends
Router Advertisement messages, specified by RFC 2461,
to a local Ethernet LAN periodically and when requested
by a node sending a Router Solicitation message. These
messages are required for IPv6 stateless autoconfiguration.
Advertisement Lifetime - The lifetime associated with
the default router in units of seconds. It's used to control
the lifetime of the prefix. The maximum value corresponds
to 18.2 hours. A lifetime of 0 indicates that the router is not
a default router and should not appear on the default router
list.
4
4
.
.
1
1
0
0
.
.
3
3
I
I
P
P
v
v
6
6
F
F
i
i
r
r
e
e
w
w
a
a
l
l
l
l
S
S
e
e
t
t
u
u
p
p
This page allows users to set firewall rules for IPv6 packets.
Note: Section 4.4 Firewall is configured for IPv4 packets only.
Name Display the name of the rule.
Protocol Display the protocol (TCP/UDP/ICMPv6) the rule uses.
Source IP Display the source IP address of such rule.
Destination IP Display the destination IP address of such rule.
Source Port Display the source port number of such rule.
Destination Port Display the destination port number of such rule.
Action Display the status (accept or drop) of such rule.
Vigor2130 Series User’s Guide
193
A
A
d
d
d
d
i
i
n
n
g
g
a
a
N
N
e
e
w
w
R
R
u
u
l
l
e
e
Click Add New Rule to configure a new rule for IPv6 Firewall.
Note: You can set up to 20 sets of IPv6 rules.
Name Type a name for the rule.
Protocol Specify a protocol for this rule.
Source IP Type Determine the IP type as the source.
Source IP Type the IP address here if you choose Single as Source
IP Type.
Source Subnet Type the subnet mask here if you choose Subnet as
Source IP Type.
Destination IP Type Determine the IP type as the destination.
Destination IP Type the IP address here if you choose Single as
Destination IP Type.
Vigor2130 Series User’s Guide
194
Destination Subnet Type the subnet mask here if you choose Subnet as
Destination IP Type.
Source Start Port Type a value as the source start port. Such value will be
available only TCP/UDP is selected as the protocol.
Source End Port (optional) Type a value as the source end port. Such value will be
available only TCP/UDP is selected as the protocol.
Destination Start Port Type a value as the destination start port. Such value will
be available only TCP/UDP is selected as the protocol.
Destination End Port (optional) Type a value as the destination end port. Such value will be
available only TCP/UDP is selected as the protocol.
Action Set the action that the router will perform for the packets
through the protocol of IPv6.
Accept – If the IPv6 packets fit the condition listed in this
page, the router will let it pass through.
Drop - If the IPv6 packets fit the condition listed in this
page, the router will block it.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
:
:
Refer to the following example.
1. Use TSPC mode to connect to IPv6 network.
PC get ipv6 IP: 2001:5c0:1503:7400:30e4:139d:53c8:3a1e
2. Connect PC to http://www.ipv6.org/
with IPv6 IP address.
A message will appear from the web page:
Welcome to the IPv6 Information Page!
You are using IPv6 from 2001:5c0:1503:7400:30e4:139d:53c8:3a1e
3. Set firewall rule to block all TCP traffic from this IP address.
4. Open IPv6 >> IPv6 Firewall Setup and press Add New Rule.
In the following dialog, please configure the page with the following values.
Vigor2130 Series User’s Guide
195
5. Connect PC to http://www.ipv6.org/
with IPv6 IP address again.
A message will appear from web page:
Welcome to the IPv6 Information Page!
You are using IPv4 from 114.37.132.219
4
4
.
.
1
1
0
0
.
.
4
4
I
I
P
P
v
v
6
6
R
R
o
o
u
u
t
t
i
i
n
n
g
g
This page displays the routing table for the protocol of IPv6.
Device Display the
interface name (eth0, eth1, fp, etc..)that
used to transfer packets with addresses matching the
prefix.
Prefix The IPv6 address prefix.
Metric Display the
distance to the target (usually counted in
hops). It is not used by recent kernels, but may be
needed by routing daemons.
Expires Display the lifetime of the route.
MTU Display t
he largest size (in bytes) of a packet.
Vigor2130 Series User’s Guide
196
Advmss Display the largest size (in bytes) of an unfragmented
piece of a routing advertisement.
Hoplimit Display the number of network segments on which the
packet is allowed to travel before discarded.
Auto-refresh Check this box to enable an automatic refresh of the page
at regular intervals.
4
4
.
.
1
1
0
0
.
.
5
5
I
I
P
P
v
v
6
6
N
N
e
e
i
i
g
g
h
h
b
b
o
o
u
u
r
r
IPv6 uses neighbor discovery protocol to find out neighbors on the same link.
Device The interface name of the link where the neighbor is on.
IP Address The IPv6 address of the neighbor.
MAC Address The link-layer address of the neighbor.
State Possible states include:
incomplete - address resolution is in progress.
reachable - neighbor is reachable.
stale – neighbor(s) may be unreachable but not verified
until a packet is sent).
delay - neighbor may be unreachable and a packet was sent.
probe - neighbor may be unreachable and probes are sent
to verify the reachability.
Auto-refresh Check this box to enable an automatic refresh of the page
at regular intervals.
4
4
.
.
1
1
0
0
.
.
6
6
I
I
P
P
v
v
6
6
T
T
S
S
P
P
C
C
S
S
t
t
a
a
t
t
u
u
s
s
IPv6 TSPC status web page could help you to diagnose the connection status of TSPC. TSPC
log contains some debug information from program.
If TSPC has not configured properly, the router will display the following page when the user
tries to connect through TSPC connection.
Vigor2130 Series User’s Guide
197
When TSPC configuration has been done, the router will start to connect. The connecting page
will be shown as below:
When the router detects all the information, the screen will be shown as follows. One set of
TSPC prefix and prefix length will be obtained after the connection between TSPC and
Tunnel broker built.
Connection Status It will bring out different pages to represent IPv6
disconnection, connecting and connected.
Vigor2130 Series User’s Guide
198
Tunnel Information Display interface name (used to send TSPC prefix), tunnel
mode, local endpoint addresses, remote endpoint address,
TSPC Prfix, TSPC Prefixlen (prefix length), tunnel broker
and so on.
Tunnel Status Disconnected - The remote client doesn't connect to the
tunnel server.
Connecting - The remote client is connecting to the tunnel
server.
Connected – The remote client has been connected to the
tunnel server.
Activity Sent - sent to the tunnel (RX bytes).
Received - received from the tunnel (RX bytes).
When the router connects to the tunnel broker, the router will use RADVD to transmit the
prefix to the PC on LAN. Next, the PC will generate one set of IPv6 public IP (see the figure
below). Users can use such IP for connecting to IPv6 network.
When your PC obtains the IPv6 address, please connect to http://www.ipv6.org
. If your PC
access Internet via IPv6 connection, your IPv6 address will be shown on the web page
immediately. Refer to the following figure.
Vigor2130 Series User’s Guide
199
4
4
.
.
1
1
1
1
U
U
s
s
e
e
r
r
4
4
.
.
1
1
1
1
.
.
1
1
U
U
s
s
e
e
r
r
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
This page allows you to set user’s setting that allowed to use PPTP, FTP, IPSEC/L2TP
connection.
A
A
d
d
d
d
i
i
n
n
g
g
a
a
N
N
e
e
w
w
U
U
s
s
e
e
r
r
Click Add a New User to open the following page.
Username Type a name for this user.
Full Name Type full name for this user.
Password Type the password for this user.
Confirm Password Type the password again for confirmation.
Allow Disk Sharing Check this box to have the remote user share the disk
information.
Allow IPSEC/L2TP Check this box to let the remote user connecting to this
device through IPSEC/L2TP.
Allow PPTP Check this box to let the remote user connecting to this
device through PPTP.
Allow FTP Check this box to let the remote user connecting to FTP
server via this router.
Delete User Remove settings on current page and delete the user. This
button is not available for new configuration by pressing
Add a New User.
Vigor2130 Series User’s Guide
200
When you finish the settings, simply click OK to save the configuration. The new user will be
created and displayed on the page.
E
E
d
d
i
i
t
t
i
i
n
n
g
g
/
/
D
D
e
e
l
l
e
e
t
t
i
i
n
n
g
g
U
U
s
s
e
e
r
r
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
To edit a user, click the name link under Username to open the following page. Modify the
settings except Username and then click OK to save and exit it. If you want to remove such
user settings, simply click Delete User.
Vigor2130 Series User’s Guide
201
4
4
.
.
1
1
2
2
S
S
y
y
s
s
t
t
e
e
m
m
M
M
a
a
i
i
n
n
t
t
e
e
n
n
a
a
n
n
c
c
e
e
For the system setup, there are several items that you have to know the way of configuration:
Status, User Password, Configuration Backup, Syslog/Mail Alert, Time and Date,
Management, Reboot System, and Firmware Upgrade.
Below shows the menu items for System Maintenance.
4
4
.
.
1
1
2
2
.
.
1
1
S
S
y
y
s
s
t
t
e
e
m
m
S
S
t
t
a
a
t
t
u
u
s
s
The System Status provides basic network settings of Vigor router. It includes LAN and
WAN interface information. Also, you could get the current running firmware version or
firmware related information from this presentation.
Model Name Display the model name of the router.
Firmware Version Display the firmware version of the router.
Build Date/Time Display the date and time of the current firmware build.
System Date Display current time and date for the system server.
System Uptime Display the connection time for the system server.
System-------
Vigor2130 Series User’s Guide
202
CPU Usage Display the percentage of the CPU usage of your system.
Memory Usage Display the size of the memory usage and the percentage.
LAN-------
MAC Address Display the MAC address of the LAN Interface.
IP Address Display the IP address of the LAN interface.
IP Mask Display the subnet mask address of the LAN interface.
IPv6 Address (Global) Display the global IPv6 address of the LAN interface.
IPv6 Address (Link) Display the link local IPv6 address of the LAN interface.
DHCP Server Display if the DHCP server is active or not.
WAN-------
Connection Mode Display current connection type used.
Link Status Display the connection status.
MAC Address Display the MAC address of the WAN Interface.
IP Address Display the IP address of the WAN interface.
IP Mask Display the subnet mask address of the WAN interface.
IPv6 Address (Link) Display the IPv6 address of the WAN interface.
Default Gateway Display the gateway address of the WAN interface.
Primary DNS Display the specified primary DNS setting.
Secondary DNS Display the specified secondary DNS setting.
Wireless LAN-------
MAC Address Display the MAC address of the wireless LAN.
Device Type Display the device type used for wireless LAN.
SSID Display the SSID of the router.
Channel Display the channel that wireless LAN used.
Manufacturer Display the manufacturer of the disk.
Model Display the model of the disk.
Size Display the storage size of the USB diskette.
Status Display current status of the USB diskette.
4
4
.
.
1
1
2
2
.
.
2
2
T
T
R
R
-
-
0
0
6
6
9
9
Vigor router with TR-069 is available for matching with VigorACS server. Such page
provides VigorACS and CPE settings under TR-069 protocol. All the settings configured here
is for CPE to be controlled and managed with VigorACS server. Users need to type URL,
username and password for the VigorACS server that such device will be connected. However
URL, username and password under CPE client are fixed that users cannot change it. The
default CPE username and password are "vigor" and "password". You will need it when you
configure VigorACS server.
Vigor2130 Series User’s Guide
203
ACS Settings
Such data must be typed according to the ACS (
Auto
Configuration Server) you want to link. Please refer
to VigorACS user’s manual for detailed information.
URL - Type the URL for VigorACS server.
If the connected CPE needs to be authenticated, please
set URL as the following and type username and
password for VigorACS server:
http://{IP address of
VigorACS}:8080/ACSServer/services/ACSServlet
If the connected CPE does not need to be authenticated
please set URL as the following:
http://{IP address of
VigorACS}:8080/ACSServer/services/UnAuthACSServ
let
Username/Password - Type username and password for
ACS Server for authentication. For example, if you want
to use such CPE with VigorACS, you can type as the
following:
Username: acs
Password: password
CPE Settings
Such information is useful for Auto Configuration
Server.
Enable/Disable – Allow/Deny the CPE Client to
connect with Auto Configuration Server.
Port – Sometimes, port conflict might be occurred.
To solve such problem, you might change port
number for CPE.
Periodic Inform Settings
Disable – The system will not send inform message to
Vigor2130 Series User’s Guide
204
ACS server.
Enable – The system will send inform message to ACS
server periodically (with the time set in the box of
interval time).
The default setting is Enable. Please set interval time or
schedule time for the router to send notification to CPE.
Or click Disable to close the mechanism of notification.
4
4
.
.
1
1
2
2
.
.
3
3
S
S
y
y
s
s
t
t
e
e
m
m
P
P
a
a
s
s
s
s
w
w
o
o
r
r
d
d
This page allows you to set new password for admin operation.
Old Password Type in the old password. The factory default setting for
password is blank.
New Password Type in new password in this filed.
Confirm Password Type in the new password again.
When you click OK, the login window will appear. Please use the new password to access into
the web configurator again.
4
4
.
.
1
1
2
2
.
.
4
4
U
U
s
s
e
e
r
r
P
P
a
a
s
s
s
s
w
w
o
o
r
r
d
d
This page allows you to set new password for user operation.
Old Password Type in the old password. The factory default setting for
password is blank.
New Password Type in new password in this filed.
Confirm Password Type in the new password again.
Vigor2130 Series User’s Guide
205
When you click OK, the login window will appear. Please use the new password to access
into the web configurator again.
4
4
.
.
1
1
2
2
.
.
5
5
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
B
B
a
a
c
c
k
k
u
u
p
p
B
B
a
a
c
c
k
k
u
u
p
p
t
t
h
h
e
e
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
Follow the steps below to backup your configuration.
1. Go to System Maintenance >> Configuration Backup. The following windows will be
popped-up, as shown below.
2. Type a key arbitrarily for encrypting the file. Keep the key in mind. You will need it
whenever you want to restore such file. Click Backup button to get into the following
dialog. Click Save button to open another dialog for saving configuration as a file.
3. In Save As dialog, the default filename is config.cfg. You could give it another name by
yourself.
Vigor2130 Series User’s Guide
206
4. Click Save button, the configuration will download automatically to your computer as a
file named config.cfg.
The above example is using Windows platform for demonstrating examples. The Mac or
Linux platform will appear different windows, but the backup function is still available.
Note: Backup for Certification must be done independently. The Configuration Backup
does not include information of Certificate.
R
R
e
e
s
s
t
t
o
o
r
r
e
e
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
1. Go to System Maintenance >> Configuration Backup. The following windows will be
popped-up, as shown below.
2. Click Browse button to choose the correct configuration file for uploading to the router.
3.
Click Restore button and wait for few seconds, the following picture will tell you that
the restoration procedure is successful.
Note: If the file you want to restore has been encrypted, you will be asked to type the
encrypted key before clicking Restore.
Vigor2130 Series User’s Guide
207
4
4
.
.
1
1
2
2
.
.
6
6
S
S
y
y
s
s
l
l
o
o
g
g
/
/
M
M
a
a
i
i
l
l
A
A
l
l
e
e
r
r
t
t
SysLog function is provided for users to monitor router. There is no bother to directly get into
the Web Configurator of the router or borrow debug equipments.
Enable (Syslog Access…) Check “Enable” to activate function of syslog.
Router Name Assign a name of this device.
Server IP Address The IP address of the Syslog server.
Destination Port Assign a port for the Syslog protocol.
Log Level Choose the severity level for the system log entry.
Enable (Mail Alert…) Check “Enable” to activate function of mail alert.
SMTP Server The IP address of the SMTP server.
Mail To Assign a mail address for sending mails out.
Mail From Assign a path for receiving the mail from outside.
User Name Type the user name for authentication.
Password Type the password for authentication.
Enable E-mail Alert Check the box of User Login to send alert message to the
e-mail box while the router detecting the item(s) you
specify here.
Click OK to save these settings.
For viewing the Syslog, please do the following:
1. Just set your monitor PC’s IP address in the field of Server IP Address
Vigor2130 Series User’s Guide
208
2. Install the Router Tools in the Utility within provided CD. After installation, click on the
Router Tools>>Syslog from program menu.
3. From the Syslog screen, select the router you want to monitor. Be reminded that in
Network Information, select the network adapter used to connect to the router.
Otherwise, you won’t succeed in retrieving information from the router.
Vigor2130 Series User’s Guide
209
4
4
.
.
1
1
2
2
.
.
7
7
T
T
i
i
m
m
e
e
a
a
n
n
d
d
D
D
a
a
t
t
e
e
It allows you to specify where the time of the router should be inquired from.
Current System Time Click Inquire Time to get the current time.
Time Zone Select the time zone where the router is located.
Add NTP server Click the button to add a new NTP server.
Delete Click this button to remove an NTP server.
Click OK to save these settings.
Vigor2130 Series User’s Guide
210
4
4
.
.
1
1
2
2
.
.
8
8
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
This page allows you to manage the settings for access control, access list, port setup, and
SMP setup. For example, as to management access control, the port number is used to
send/receive SIP message for building a session. The default value is 5060 and this must
match with the peer Registrar when making VoIP calls.
Enable
HTTP/HTTPS/SSH/ICMP
Ping/FTP/TELNET
Enable the checkbox to allow system administrators to
login from the Internet. There are several servers
provided by the system to allow you managing the router
from Internet. Check the box(es) to specify.
Enable SNMP
Check it to enable such service.
Manager Host IP – Set one host as the manager to
execute SNMP function. Type the IP address to specify
the certain host.
Access List You could specify that the system administrator can only
login from a specific host or network defined in the list. A
maximum of three IPs/subnet masks is allowed.
List IP - Indicate an IP address allowed to login to the
router.
Subnet Mask - Represent a subnet mask allowed to login to
the router.
Vigor2130 Series User’s Guide
211
4
4
.
.
1
1
2
2
.
.
9
9
R
R
e
e
b
b
o
o
o
o
t
t
S
S
y
y
s
s
t
t
e
e
m
m
The Web Configurator may be used to restart your router for using current configuration.
Click Reboot System from System Maintenance to open the following page.
Click OK. The router will take 5 seconds to reboot the system.
Note: When the system pops up Reboot System web page after you configure web settings,
please click OK to reboot your router for ensuring normal operation and preventing
unexpected errors of the router in the future.
4
4
.
.
1
1
2
2
.
.
1
1
0
0
F
F
i
i
r
r
m
m
w
w
a
a
r
r
e
e
U
U
p
p
g
g
r
r
a
a
d
d
e
e
Before upgrading your router firmware, you need to install the Router Tools. The Firmware
Upgrade Utility is included in the tools. The following web page will guide you to upgrade
firmware by using an example. Note that this example is running over Windows OS
(Operating System).
Download the newest firmware from DrayTek's web site or FTP site. The DrayTek web site is
www.draytek.com (or local DrayTek's web site) and FTP site is ftp.draytek.com.
Click Maintenance>> Firmware Upgrade to launch the Firmware Upgrade Utility.
Click Browse.. to locate the newest firmware and click Upgrade. During the process of
upgrade, do not turn off your router.
Vigor2130 Series User’s Guide
212
4
4
.
.
1
1
3
3
D
D
i
i
a
a
g
g
n
n
o
o
s
s
t
t
i
i
c
c
s
s
Diagnostic Tools provide a useful way to view or diagnose the status of your Vigor router.
Below shows the menu items for Diagnostics.
4
4
.
.
1
1
3
3
.
.
1
1
P
P
i
i
n
n
g
g
Click Diagnostics and click Ping to open the web page. It is used to troubleshoot IP
connection for your router.
IP Address Type in the IP address of the Host/IP that you want to ping.
Ping Size Type in the payload size of the ICMP packet. Values range from 8
bytes to 1400 bytes.
Start Click this button to start the ping work. The result will be displayed
on the screen.
Vigor2130 Series User’s Guide
213
4
4
.
.
1
1
3
3
.
.
2
2
R
R
o
o
u
u
t
t
i
i
n
n
g
g
T
T
a
a
b
b
l
l
e
e
Click Diagnostics and click Routing Table to open the web page.
Destination Display the IP address for destination network or
destination host.
Gateway Display the gateway address or “*” if none set.
Genmask Display
the netmask for the destination net;
'255.255.255.255' is for a host destination and '0.0.0.0' is
for the default route.
Flags Different codes represent different routing status.
U - route is up.
H - target is a host
G - use gateway
R - reinstate route for dynamic routing
D - dynamically installed by daemon or redirect
M - modified from routing daemon or redirect
A - installed by addrconf
C - cache entry
! - reject route
Metric Display the distance to the target (usually counted in hops).
Ref Display number of references to this route. (Not used in the
Linux kernel.)
Use Display count of lookups for the route. Depending on the
use of -F and –C, this will be either route cache misses (-F)
or hits (-C).
Iface Display interface to which packets for this route will be
sent.
Refresh Click it to reload the page.
Vigor2130 Series User’s Guide
214
4
4
.
.
1
1
3
3
.
.
3
3
S
S
y
y
s
s
t
t
e
e
m
m
L
L
o
o
g
g
Click Diagnostics and click System Log to open the web page.
Time Display the time of the system log entry.
Level Display the severity level of the system log entry.
Type Display the type or subsystem of the system log entry.
Message Display a short description of the system log entry.
Auto-refresh Check it to enable auto-refresh function.
Reverse Check it to have newest log entries presented first.
Refresh Click it to reload the page.
Export Click it to export the log as a text file.
4
4
.
.
1
1
3
3
.
.
4
4
T
T
r
r
a
a
f
f
f
f
i
i
c
c
O
O
v
v
e
e
r
r
v
v
i
i
e
e
w
w
This page offers an overview of general traffic statistics for all connecting ports.
Port Display the interface that data transmission passing
through.
Vigor2130 Series User’s Guide
215
Packets Display the packet sizes for data transmission in receiving
and sending.
Bytes Display the number of received and transmitted bytes per
port.
Errors Display the number of the error occurred in data receiving
and data sending.
Drops Display the number of the data lost in receiving and
sending.
Filtered Display the number of received frames filtered by the
forwarding process.
Auto-refresh Check it to enable auto-refresh function.
Refresh Click it to reload the page.
Clear Click it to clear the counters for all ports.
4
4
.
.
1
1
3
3
.
.
5
5
D
D
e
e
t
t
a
a
i
i
l
l
e
e
d
d
S
S
t
t
a
a
t
t
i
i
s
s
t
t
i
i
c
c
s
s
This page display detailed statistics for WAN/LAN interface.
Rx Packets Display the counting number of the packet received.
Rx Octets Display the total received bytes.
Rx Unicast Display the counting number of the received unicast
packet.
Vigor2130 Series User’s Guide
216
Rx Broadcast Display the counting number of the received broadcast
packet.
Rx Pause Display the counting number of the received pause packet.
RX 64 Bytes Display the number of 64-byte frames in good and bad
packets received.
RX 65-127 Bytes Display the number of 65 ~ 127-byte frames in good and
bad packets received.
RX 128-255 Bytes Display the number of 128 ~ 255-byte frames in good and
bad packets received.
RX 256-511 Bytes Display the number of 256 ~ 511-byte frames in good and
bad packets received.
RX 512-1023 Bytes Display the number of 512 ~ 1023-byte frames in good and
bad packets received.
RX 1024- 1526 Bytes Display the number of 1024-1522-byte frames in good and
bad packets received.
RX 1527 Bytes Display the number of 1527-byte frames in good and bad
packets received.
Rx Low Display the low queue counter of the packet received.
Rx Normal Display the normal queue counter of the packet received.
Rx Medium Display the medium queue counter of the packet received.
Rx High Display the high queue counter of the packet received.
Rx Drops Display the number of frames dropped due to the lack of
receiving buffer.
Rx CRC/Alignment Display the number of Alignment errors packets received.
Rx Undersize Display the number of short frames (<64 Bytes) with valid
CRC.
Rx Oversize Display the number of long frames (according to
max_length register) with valid CRC.
Rx Fragments Display the number of short frames (< 64 bytes) with
invalid CRC.
Rx Jabber Display the number of long frames (according
tomax_length register) with invalid CRC.
Rx Filtered Display the filtered number of the packet received.
Tx Packets Display the counting number of the packet transmitted.
Tx Octets Display the total transmitted bytes.
Tx Unicast Display the show the counting number of the transmitted
unicast packet.
Tx Multicast Display the show the counting number of the transmitted
multicast packet.
Tx Broadcast Display the counting number of the transmitted broadcast
packet.
Tx Pause Show the counting number of the transmitted pause packet.
Vigor2130 Series User’s Guide
217
Tx 64 Bytes Display the number of 64-byte frames in good and bad
packets transmitted.
Tx 65-127 Bytes Display the number of 65 ~ 127-byte frames in good and
bad packets transmitted.
Tx 128-255 Bytes Display the number of 128 ~ 255-byte frames in good and
bad packets transmitted.
Tx 256-511 Bytes Display the number of 256 ~ 511-byte frames in good and
bad packets transmitted.
Tx 512-1023 Bytes Display the number of 512 ~ 1023-byte frames in good and
bad packets transmitted.
Tx 1024- 1526 Bytes Display the number of 1024 ~ 1522-byt frames in good and
bad packets transmitted.
Tx 1527 Bytes: Display the number of 1527-byte frames in good and bad
packets transmitted.
Tx Low Display the low queue counter of the packet transmitted.
Tx Normal Display the normal queue counter of the packet
transmitted.
Tx Medium Display the medium queue counter of the packet received.
Tx High Display the high queue counter of the packet received.
Tx Drops Display the number of frames dropped due to excessive
collision, late collision, or frame aging.
Tx lat/Exc.Coll. Display the number of Frames late collision or excessive
collision Error, which switch transmitted
Auto-refresh Check it to enable auto-refresh function.
Refresh Click it to reload the page.
Clear Click it to clear the counters for all ports.
4
4
.
.
1
1
3
3
.
.
6
6
M
M
A
A
C
C
A
A
d
d
d
d
r
r
e
e
s
s
s
s
T
T
a
a
b
b
l
l
e
e
The MAC Address Table contains up to 8192 entries, and is sorted first by VLAN ID, then by
MAC address.
Each page shows up to 999 entries from the MAC table, default being 20, selected through the
"entries per page" input field. When first visited, the web page will show the first 20 entries
from the beginning of the MAC Table. The first displayed will be the one with the lowest
VLAN ID and the lowest MAC address found in the MAC Table.
The Start from MAC address and VLAN input fields allow the user to select the starting
point in the MAC Table. Clicking the Refresh button will update the displayed table starting
from that or the closest next MAC Table match. In addition, the two input fields will assume
the value of the first displayed entry, allowing for continuous refresh with the same start
address.
The button >> will use the last entry of the currently displayed VLAN/MAC address pairs as a
basis for the next lookup. When the end is reached the text "no more entries" is shown in the
displayed table, use the l<< button to start over.
Vigor2130 Series User’s Guide
218
Type Indicate whether the entry is a static or dynamic entry.
VLAN Display the VLAN ID of that entry.
MAC Address Display the MAC address of that entry.
Port Members Display the port of that entry.
Auto-refresh Check it to enable auto-refresh function.
Refresh Click it to reload the page.
Clear Click it to clear the whole table.
Vigor2130 Series User’s Guide
219
4
4
.
.
1
1
3
3
.
.
7
7
D
D
H
H
C
C
P
P
T
T
a
a
b
b
l
l
e
e
The facility provides information on IP address assignments. This information is helpful in
diagnosing network problems, such as IP address conflicts, etc.
Click Diagnostics and click DHCP Table to open the web page.
Computer Name It displays the name of the computer accepted the assigned
IP address by this router.
IP Address It displays the IP address assigned by this router for
specified PC.
MAC Address It displays the MAC address for the specified PC that
DHCP assigned IP address for it.
Expire Time It displays the leased time of the specified PC.
Auto-refresh Check it to enable auto-refresh function.
Refresh Click it to reload the page.
Vigor2130 Series User’s Guide
220
4
4
.
.
1
1
3
3
.
.
8
8
D
D
a
a
t
t
a
a
F
F
l
l
o
o
w
w
M
M
o
o
n
n
i
i
t
t
o
o
r
r
This page displays the running procedure for the IP address monitored and refreshes the data
in an interval of several seconds. The IP address listed here is configured in Bandwidth
Management. You have to enable IP bandwidth limit and IP session limit before invoke Data
Flow Monitor. If not, a notification dialog box will appear to remind you enabling it.
Click Diagnostics and click Data Flow Monitor to open the web page. You can click IP
Address, TX rate, RX rate or Session link for arranging the data display.
Auto-refresh Check it to enable auto-refresh function.
Refresh Click this link to refresh this page manually.
Index Display the number of the data flow.
IP Address Display the IP address of the monitored device.
TX rate (kbps) Display the transmission speed of the monitored device.
RX rate (kbps) Display the receiving speed of the monitored device.
Hardware NAT rate Display the data processing rate of the monitored device if
hardware NAT is enabled.
Sessions Display the session number that you specified in Limit
Session web page.
Action Block - can prevent specified PC accessing into Internet
within 5 minutes.
Unblock – the device with the IP address will be blocked
Vigor2130 Series User’s Guide
221
in five minutes. The remaining time will be shown on the
session column.
4
4
.
.
1
1
3
3
.
.
9
9
P
P
o
o
r
r
t
t
s
s
S
S
t
t
a
a
t
t
e
e
Click Diagnostics and click Ports State to open the list page. There are for LAN ports and
one WAN port in your router. Through this page, you can know which port is using and you
can get the detailed statistics for each port by moving and clicking the mouse on the connected
one.
Auto-refresh Check it to enable auto-refresh function.
Refresh Click it to reload the page if you change the LAN port
connection. Or you can check Auto-refresh to reload the
page by the system automatically.
Vigor2130 Series User’s Guide
222
This page is left blank.
Vigor2130 Series User’s Guide
223
5
T
T
r
r
o
o
u
u
b
b
l
l
e
e
S
S
h
h
o
o
o
o
t
t
i
i
n
n
g
g
This section will guide you to solve abnormal situations if you cannot access into the Internet
after installing the router and finishing the web configuration. Please follow sections below to
check your basic installation status stage by stage.
z Checking if the hardware status is OK or not.
z Checking if the network connection settings on your computer are OK or not.
z Pinging the router from your computer.
z Checking if the ISP settings are OK or not.
z Backing to factory default setting if necessary.
If all above stages are done and the router still cannot run normally, it is the time for you to
contact your dealer for advanced help.
5
5
.
.
1
1
C
C
h
h
e
e
c
c
k
k
i
i
n
n
g
g
I
I
f
f
t
t
h
h
e
e
H
H
a
a
r
r
d
d
w
w
a
a
r
r
e
e
S
S
t
t
a
a
t
t
u
u
s
s
I
I
s
s
O
O
K
K
o
o
r
r
N
N
o
o
t
t
Follow the steps below to verify the hardware status.
1. Check the power line and WLAN/LAN cable connections.
Refer to “1.3 Hardware Installation” for details.
2. Turn on the router. Make sure the ACT LED blink once per second and the
correspondent LAN LED is bright.
3. If not, it means that there is something wrong with the hardware status. Simply back to
“1.3 Hardware Installation” to execute the hardware installation again. And then, try
again.
Vigor2130 Series User’s Guide
224
5
5
.
.
2
2
C
C
h
h
e
e
c
c
k
k
i
i
n
n
g
g
I
I
f
f
t
t
h
h
e
e
N
N
e
e
t
t
w
w
o
o
r
r
k
k
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
o
o
n
n
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
o
o
n
n
Y
Y
o
o
u
u
r
r
C
C
o
o
m
m
p
p
u
u
t
t
e
e
r
r
I
I
s
s
O
O
K
K
o
o
r
r
N
N
o
o
t
t
Sometimes the link failure occurs due to the wrong network connection settings. After trying
the above section, if the link is stilled failed, please do the steps listed below to make sure the
network connection settings is OK.
F
F
o
o
r
r
W
W
i
i
n
n
d
d
o
o
w
w
s
s
The example is based on Windows XP. As to the examples for other operation
systems, please refer to the similar steps or find support notes in
www.draytek.com.
1. Go to Control Panel and then double-click on Network Connections.
2. Right-click on Local Area Connection and click on Properties.
3. Select Internet Protocol (TCP/IP) and then click Properties.
Vigor2130 Series User’s Guide
225
4. Select Obtain an IP address automatically and Obtain DNS server address
automatically.
F
F
o
o
r
r
M
M
a
a
c
c
O
O
s
s
1. Double click on the current used MacOs on the desktop.
2. Open the Application folder and get into Network.
3. On the Network screen, select Using DHCP from the drop down list of Configure IPv4.
Vigor2130 Series User’s Guide
226
5
5
.
.
3
3
P
P
i
i
n
n
g
g
i
i
n
n
g
g
t
t
h
h
e
e
R
R
o
o
u
u
t
t
e
e
r
r
f
f
r
r
o
o
m
m
Y
Y
o
o
u
u
r
r
C
C
o
o
m
m
p
p
u
u
t
t
e
e
r
r
The default gateway IP address of the router is 192.168.1.1. For some reason, you might need
to use “ping” command to check the link status of the router. The most important thing is
that the computer will receive a reply from 192.168.1.1. If not, please check the IP address
of your computer. We suggest you setting the network connection as get IP automatically.
(Please refer to the section 5.2)
Please follow the steps below to ping the router correctly.
F
F
o
o
r
r
W
W
i
i
n
n
d
d
o
o
w
w
s
s
1. Open the Command Prompt window (from Start menu> Run).
2. Type command (for Windows 95/98/ME) or cmd (for Windows NT/ 2000/XP/Vista).
The DOS command dialog will appear.
3. Type ping 192.168.1.1 and press [Enter]. If the link is OK, the line of “Reply from
192.168.1.1:bytes=32 time<1ms TTL=255” will appear.
4. If the line does not appear, please check the IP address setting of your computer.
F
F
o
o
r
r
M
M
a
a
c
c
O
O
s
s
(
(
T
T
e
e
r
r
m
m
i
i
n
n
a
a
l
l
)
)
1. Double click on the current used MacOs on the desktop.
2. Open the Application folder and get into Utilities.
3. Double click Terminal. The Terminal window will appear.
4. Type ping 192.168.1.1 and press [Enter]. If the link is OK, the line of “64 bytes from
192.168.1.1: icmp_seq=0 ttl=255 time=xxxx ms” will appear.
Vigor2130 Series User’s Guide
227
5
5
.
.
4
4
C
C
h
h
e
e
c
c
k
k
i
i
n
n
g
g
I
I
f
f
t
t
h
h
e
e
I
I
S
S
P
P
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
a
a
r
r
e
e
O
O
K
K
o
o
r
r
N
N
o
o
t
t
Open WAN>>Internet Access page and then check whether the ISP settings are set correctly.
Use the Connection Type drop down list to choose Static IP/DHCP/PPPoE/PPTP/L2TP/3G
USB Modem for reviewing the settings that you configured previously.
Vigor2130 Series User’s Guide
228
F
F
o
o
r
r
S
S
t
t
a
a
t
t
i
i
c
c
U
U
s
s
e
e
r
r
s
s
1. Choose Static IP as the connection type.
2. Check if IP Address, IP Mask and IP Router are set correctly (must identify with the
values from your ISP).
F
F
o
o
r
r
P
P
P
P
P
P
o
o
E
E
U
U
s
s
e
e
r
r
s
s
1. Choose PPPoE as the connection type.
2. Check if Username and Password are set correctly (must identify with the values from
your ISP).
Vigor2130 Series User’s Guide
229
F
F
o
o
r
r
P
P
P
P
T
T
P
P
/
/
L
L
2
2
T
T
P
P
U
U
s
s
e
e
r
r
s
s
1. Choose PPTP/L2TP as the connection type.
2. Check if Username, Password, IP address, Subnet Mask are entered with correct
values that you get from your ISP.
5
5
.
.
5
5
F
F
o
o
r
r
c
c
i
i
n
n
g
g
V
V
i
i
g
g
o
o
r
r
R
R
o
o
u
u
t
t
e
e
r
r
i
i
n
n
t
t
o
o
T
T
F
F
T
T
P
P
M
M
o
o
d
d
e
e
f
f
o
o
r
r
P
P
e
e
r
r
f
f
o
o
r
r
m
m
i
i
n
n
g
g
t
t
h
h
e
e
F
F
i
i
r
r
m
m
w
w
a
a
r
r
e
e
U
U
p
p
g
g
r
r
a
a
d
d
e
e
1. Press and hold the Factory Reset button. The system will power off and power on the
Vigor Router.
2. Release the Factory Reset button when the ACT LED and its neighbor LED blink
simultaneously.
There are different LED blinking methods in describing TFTP mode status:
Vigor2130: ACT LED & its neighbor LED blink simultaneously.
3. Change your PC IP address to 192.168.1.10.
4. Open Firmware Upgrade Utility and key in Router IP 192.168.1.1 manually.
5. Install Router Tools on one computer that connects to Vigor Router's LAN port.
6. Make sure the computer can ping Vigor's LAN IP. ( Default IP is 192.168.1.1 )
7. Run Router Tools >> Firmware Upgrade Utility.
8. Input Vigor's LAN IP manually or use the . . .button to select.
9. Indicate the firmware location.
Note: There are two firmware types. The .rst firmware format will make the
configurations be back to default settings after upgrading firmware. The .all
firmware format will remain the former configurations after upgrading firmware.
Vigor2130 Series User’s Guide
230
10. Input the Password if you have set one, then click Send.
11. There is a bar showing the upgrading process.
12. When the firmware upgrade is successful, the following window will pop up.
Vigor2130 Series User’s Guide
231
If the message of Request Timeout. Transfer Abort ! appears, please check if the connection
between the computer and the Vigor is active or not. And, if the message of Incorrect/No file
name. Transfer Abort ! appears, please check if the firmware you download is correct for
your Vigor router.
Note: Please turn off the Firewall protection while upgrading the firmware with Windows
Vista. The Firewall function can be turned off via Control Panel >> Security Center >>
Firewall.
Vigor2130 Series User’s Guide
232
5
5
.
.
6
6
B
B
a
a
c
c
k
k
i
i
n
n
g
g
t
t
o
o
F
F
a
a
c
c
t
t
o
o
r
r
y
y
D
D
e
e
f
f
a
a
u
u
l
l
t
t
S
S
e
e
t
t
t
t
i
i
n
n
g
g
I
I
f
f
N
N
e
e
c
c
e
e
s
s
s
s
a
a
r
r
y
y
Sometimes, a wrong connection can be improved by returning to the default settings. Try to
reset the router by software or hardware.
Warning: After pressing factory default setting, you will loose all settings you did before.
Make sure you have recorded all useful settings before you pressing.
S
S
o
o
f
f
t
t
w
w
a
a
r
r
e
e
R
R
e
e
s
s
e
e
t
t
You can reset the router to factory default via Web page.
Go to System Maintenance and choose Reboot System on the web page. The following
screen will appear. Choose Using factory default configuration and click OK. After few
seconds, the router will return all the settings to the factory settings.
H
H
a
a
r
r
d
d
w
w
a
a
r
r
e
e
R
R
e
e
s
s
e
e
t
t
While the router is running (ACT LED blinking), press the Factory Reset button and hold for
more than 5 seconds. When you see the ACT LED blinks rapidly, please release the button.
Then, the router will restart with the default configuration.
After restore the factory default setting, you can configure the settings for the router again to
fit your personal request.
Vigor2130 Series User’s Guide
233
5
5
.
.
7
7
C
C
o
o
n
n
t
t
a
a
c
c
t
t
i
i
n
n
g
g
Y
Y
o
o
u
u
r
r
D
D
e
e
a
a
l
l
e
e
r
r
If the router still cannot work correctly after trying many efforts, please contact your dealer for
further help right away. For any questions, please feel free to send e-mail to
support@draytek.com.
… 16 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Draytek VIGOR 2130 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Draytek VIGOR 2130 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Draytek VIGOR 2130

Draytek VIGOR 2130 Gebruiksaanwijzing - Nederlands - 23 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info