English
www.doro.com 5
Installation
Unpacking
The package should include the following items:
- Handset - Mains adapter
- Base unit - Line cord
- Battery pack - Belt clip & 2 coloured inserts
- Battery cover
Connection
1. Connect the mains adapter to the POWER socket of the base unit and to
the mains power wall socket.
2. Remove the battery lid from the back of the handset. Place the battery in the
handset, connect the battery plug and replace the lid.
3. Place the handset in the base unit. Once the handset is correctly placed in
the base unit, a beep will be heard and the segments of the battery charge
indicator in the display will ash.
4. The handset must be charged for 14 hours before use. Do not lift or use the
handset during this time.
5. Connect the telephone line cord to the socket marked LINE on the base unit
and plug into the telephone network socket (using adaptor plug if required).
6. For installation of the answering machine (DECT 360) please refer to pages
25-30.
7. The system is now ready for use.
IMPORTANT NOTES
1. Under power failure conditions, this telephone may not operate. Please ensure that a
separate telephone, not dependent on local power, is available for emergency use.
2. The earpiece of the handset may attract small ferromagnetic objects such as staples and pins,
care should be taken when placing the handset near these items.
3. Do not place the base unit where it will be exposed to direct sunlight or other major
heat sources.
