Handleiding Doro 1360 (pagina 2 van 2) (Engels)

762145

Verklein

Vergroot

Pagina terug

1/2

Pagina verder

Model: DFB-0120

Doro 1360 (3031,3051)

QSG

English

QSG_Doro_1360_en_A3-A7_v40_3031_3051

6. 

1. Press Menu â .

2. Press OK to take the photo.

3. Press  or press Back to take a new

photo (if you do not make any selecon the

picture is saved).



• Press Menu â  â .

7. BLUETOOTH®

You can connect wirelesses to other Bluetooth®

compable devices such as headsets or other

phones.

Important!

When you are not using Bluetooth® connecv-

ity, turn o  or . Do not pair

with an unknown device.

®

1. Press Menu â  â  â

 â On.

2. Press OK to conrm.

Search device

1. Press Menu â  â  â

Search device.

2. Select a device from the list and press Bond

to connect. If Bluetooth® is not enabled,

press Yes to acvate.

3. Press OK to conrm.

8. SOUND & DISPLAY

Tone setup

1. Press Menu â  â Sound â

Tone setup â .

2. Use / to select one of the available

melodies, the melody will be played.

3. Press OK to conrm or Back to discard

changes.

Text size

You can customise the text size for the menu

and messages.

1. Press Menu â  â  â

Text size:

•  or Large.

2. Press OK to conrm.

Brightness

You can customise the brightness sengs. The

higher value, the beer contrast.

10. TROUBLESHOOTING

Phone cannot be switched on

 Connect the power adapter

and charge the baery.

 Check the installaon of the

baery.



 Check the baery and charger.

-

tures < 0°C or > 40°C

Improve the charging

environment.



to phone or power socket

Check the charger

connecons.

PIN code not accepted

Wrong PIN code entered too



Enter the PUK code to change

the PIN code, or contact the

service provider.

SIM card error



Check the condion of the

SIM card. If it is damaged,

contact the service provider.



Check the installaon of the

SIM card. Remove the card

and reinstall it.



Wipe the contact surfaces

of the SIM card with a clean

cloth.



 Contact the service provider.

 Contact the service provider.



 Delete contacts to free up

memory.





 Contact the service provider.

11. SAFETY INSTRUCTIONS

WARNING

The unit and the accessories can contain small parts. Keep all of

the equipment out of the reach of small children.

The mains adapter is the disconnect device between the product

and mains power. The mains socket outlet must be close to the

equipment and easily accessible.

Network services and costs

Your device is approved for use on the

GSM 850/900/1800/1900 MHz networks. To use the device,

you need a subscripon with a service provider.

Using network services may result in trac costs. Some

product features require support from the network, and you

may need to subscribe to them.



Follow the rules and laws that apply wherever you are, and

always turn o the unit whenever its use is prohibited or can

cause interference or hazards. Only use the unit in its normal

user posion.

Parts of the unit are magnec. The unit can aract metal

objects. Do not keep credit cards or other magnec media near

the unit. There is a risk that informaon stored on them can be

erased.



The use of equipment that transmits radio signals, for example,

mobile phones, can interfere with insuciently protected

medical equipment. Consult a doctor or the manufacturer

of the equipment to determine if it has adequate protecon

against external radio signals, or if you have any quesons. If

noces have been put up at health care facilies instrucng

you to turn o the unit while you are there, you should comply.

Hospitals and other health care facilies somemes use

equipment that can be sensive to external radio signals.



To avoid potenal interference, manufacturers of implanted

medical devices recommend a minimum separaon of 15 cm

between a wireless device and the medical device. Persons

who have such devices should:

• Always keep the wireless device more than 15 cm from the

medical device.

• Not carry the wireless device in a breast pocket.

• Hold the wireless device to the ear opposite the medical device.

If you have any reason to suspect that interference is taking

place, turn the phone o immediately. If you have any

quesons about using your wireless device with an implanted

medical device, consult your health care provider.



Always turn o the unit when you are in an area where there

is a risk of explosion. Follow all signs and instrucons. There is

a risk of explosion in places that include areas where you are

normally requested to turn o your car engine. In these areas,

sparks can cause explosion or re which can lead to personal

injury or even death.

Turn o the unit at lling staons, and any other place that has

fuel pumps and auto repair facilies.

Follow the restricons that apply to the use of radio equipment

near places where fuel is stored and sold, chemical factories

and places where blasng is in progress. Areas with risk for

explosion are oen – but not always – clearly marked. This

also applies to below decks on ships; the transport or storage

of chemicals; vehicles that use liquid fuel (such as propane or

butane); areas where the air contains chemicals or parcles,

such as grain, dust or metal powder.



This product contains a Li-ion baery. There is a risk of re and

burns if the baery pack is handled improperly.

WARNING

Danger of explosion if baery is incorrectly replaced. To reduce

risk of re or burns, do not disassemble, crush, puncture, short

external contacts, expose to temperature above 60° C (140° F),

or dispose of in re or water. Recycle or dispose of used baeries

according to the local regulaons or reference guide supplied

with your product.



WARNING

Excessive exposure to loud sounds can cause

hearing damage.

Exposure to loud sounds while driving may distract

your aenon and cause an accident.

Listen to a headset at a moderate level, and do not hold the

device near your ear when the loudspeaker is in use.





Mobile phones use radio signals, the mobile phone network, the

terrestrial network and user-programmed funcons. This means

that connecon cannot be guaranteed in all circumstances.

Therefore, never rely only on a mobile phone for very important

calls such as medical emergencies.



Radio signals can aect electronic systems in motor vehicles

(for example, electronic fuel injecon, ABS brakes, automac

cruise control, air bag systems) that have been incorrectly

installed or are inadequately protected. Contact the manufac-

turer or its representave for more informaon about your

vehicle or any addional equipment.

Do not keep or transport ammable liquids, gases or explosives

together with the unit or its accessories.

For vehicles equipped with air bags: Remember that air bags ll

with air with considerable force. Do not place objects, including

xed or portable radio equipment in the area above the airbag

or the area where it might expand. Serious injuries may be

caused if the mobile phone equipment is incorrectly installed

and the airbag lls with air.

It is prohibited to use the unit in ight. Turn o the unit before

you board a plane. Using wireless telecom units inside a plane

can pose risks to air safety and interfere with telecommunica-

ons. It may also be illegal.

12. CARE AND MAINTENANCE

Your unit is a technically advanced product and should be

treated with the greatest care. Negligence may void the

warranty.

• Protect the unit from moisture. Rain/snowfall, moisture and

all types of liquid can contain substances that corrode the

electronic circuits. If the unit gets wet, you should remove the

baery and allow the unit to dry completely before you replace

it.

• Do not use or keep the unit in dusty, dirty environments. The

unit’s moving parts and electronic components can be damaged.

• Do not keep the unit in warm places. High temperatures can

reduce the lifespan for electronic equipment, damage baeries

and distort or melt certain plascs.

• Do not keep the unit in cold places. When the unit warms up

to normal temperature, condensaon can form on the inside

which can damage the electronic circuits.

• Do not try to open the unit in any other way than that which is

indicated here.

• Do not drop the unit. Do not knock or shake it either. If it is

treated roughly the circuits and precision mechanics can be

broken.

• Do not use strong chemicals to clean the unit.

The advice above applies to the unit, baery, mains adapter

and other accessories. If the phone is not working as it should,

please contact the place of purchase for service. Don’t forget

the receipt or a copy of the invoice.

13. WARRANTY

This product is guaranteed for a period of 24 months and for

original accessories for a period of 12 months (such as the

baery, charger, charging cradle or handsfree kit) which may

be delivered with your device, from the date of purchase. In

the unlikely event of a fault occurring during this period, please

contact the place of purchase. Proof of purchase is required for

any service or support needed during the guarantee period.

This guarantee will not apply to a fault caused by an accident

or a similar incident or damage, liquid ingress, negligence,

abnormal usage, non-maintenance or any other circumstances

on the user’s part. Furthermore, this guarantee will not apply

to any fault caused by a thunderstorm or any other voltage

uctuaons. As a maer of precauon, we recommend discon-

necng the charger during a thunderstorm.

Please note that this is a voluntary manufacturer’s warranty

and provides rights in addion to, and does not aect statutory

rights of end-users.

This guarantee does not apply if baeries other than DORO

original baeries are used.

14. COPYRIGHT AND OTHER NOTICES

Bluetooth® is a registered trademark of Bluetooth SIG, inc.

eZiType™ is a trademark of Zi Corporaon.

vCard is a trademark of the Internet Mail Consorum.

microSD is a trademark of SD Card Associaon.

The contents of this document are provided “as is”. Except as

required by applicable law, no warranes of any kind, either

express or implied, including, but not limited to, the implied

warranes of merchantability and tness for a parcular

purpose, are made in relaon to the accuracy, reliability or

contents of this document. Doro reserves the right to revise

this document or withdraw it at any me without prior noce.

Other product and company names menoned herein may be

the trademarks of their respecve owners.

Any rights not expressly granted herein are reserved. All other

trademarks are property of their respecve owners. To the

maximum extent permied by applicable law, under no circum-

stances shall Doro or any of its licensors be responsible for any

loss of data or income or any special, incidental, consequenal

or indirect damages howsoever caused.

Doro does not provide a warranty for or take any responsi-

bility for the funconality, content, or end-user support of

third-party apps provided with your device. By using an app,

you acknowledge that the app is provided as is. Doro does

not make any representaons, provide a warranty, or take

any responsibility for the funconality, content, or end-user

support of third-party apps provided with your device.



The unauthorised copying of copyrighted materials is contrary

to the provisions of the Copyright Laws of the United States

and other countries. This device is intended solely for copying

non-copyrighted materials, materials in which you own the

permied to copy. If you are uncertain about your right to copy

any material, please contact your legal advisor.

15. TECHNICAL DATA









850 [33], 900 [33],

1800 [30], 1900 [30]







3.0 (2402 - 2480) [10]

 126 mm x 62 mm x 13 mm

Weight: 96 g (including baery)

 5V/800 mAh Li-ion baery





Min: 0°C (32°F)

Max: 40°C (104°F)





Min: 0°C (32°F)

Max: 40°C (104°F)

 Min: -20°C (-4°F)

Max: 60°C (140°F)



This device meets applicable internaonal safety require-

ments for exposure to radio waves. Your mobile device is a

radio transmier and receiver. It is designed not to exceed the

limits for exposure to radio waves (radio frequency electromag-

nec elds) recommended by internaonal guidelines from

the independent scienc organizaon ICNIRP (Internaonal

Commission of Non-Ionizing Radiaon Protecon).

The radio wave exposure guidelines use a unit of measurement

known as the Specic Absorpon Rate, or SAR. The SAR limit

for mobile devices is 2 W/kg averaged over 10 grams of ssue

and include a substanal safety margin designed to assure the

safety of all persons, regardless of age and health.

Tests for SAR are conducted using standard operang posions

with the device transming at its highest cered power level

in all tested frequency bands. The highest SAR values under the

ICNIRP guidelines for this device model are:

Head SAR: 0.613 W/kg

Body SAR: 1.896 W/kg

During normal use, the SAR values for this device are usually

well below the values stated above. This is because, for

purposes of system eciency and to minimize interference

on the network, the output power of your mobile device is

automacally decreased when full power is not needed for the

call. The lower the power output of the device, the lower its

SAR value.

This device meets RF exposure guidelines when used against

the head or when posioned at least 0.5 cm away from the

body. When a carry case, belt clip or other form of device

holder is used for body-worn operaon, it should not contain

metal and should provide at least the above stated separaon

distance from the body.

The World Health Organizaon (WHO) has stated that current

scienc informaon does not indicate the need for any special

precauons when using mobile devices. If you are interested

in reducing your exposure, they recommend you reduce your

usage or use a hands-free accessory to keep the device away

from your head and body.



(Waste Electrical & Electronic Equipment)

(Applicable in countries with separate collecon systems)

This marking on the product, accessories or manual

indicates that the product and its electronic accessories

(e.g. charger, headset, USB cable) should not be disposed

of with other household waste. To prevent possible harm to

the environment or human health from uncontrolled waste

disposal, please separate these items from other types of waste

and recycle them responsibly to promote the sustainable reuse

of material resources.

Household users should contact either the retailer where they

purchased this product, or their local government oce, for

details of where and how they can take these items for envi-

ronmentally safe recycling. Business users should contact their

supplier and check the terms and condions of the purchase

contract. This product and its electronic accessories should

not be mixed with other commercial wastes for disposal. This

product is RoHS compliant.



(Applicable in countries with separate collecon systems)

The marking on the baery, manual or packaging

indicates that the baery in this product should not be

disposed of with other household waste. Where marked, the

chemical symbols Hg, Cd or Pb indicate that the baery contains

mercury, cadmium or lead above the reference levels in EC

Direcve 2006/66. If baeries are not properly disposed of, these

substances can cause harm to human health or the environment.

To protect natural resources and to promote material reuse,

please separate baeries from other types of waste and recycle

them through your local, free baery return system.

1. Press Menu â  â  â

Brightness:

• .

2. Press OK to conrm.

9. ADDITIONAL FUNCTIONS



1. Press Menu â  â On.

2. Enter the alarm me using the keypad and

press OK to conrm.

• , for a single occurrence,

• Repeated, for a repeated alarm. Scroll

through the list of days and press On or 

to enable or to disable for each day.

3. When done, press Save.

4. When the alarm goes o a signal will sound.

Press Stop to turn o the alarm or press

Snooze to repeat the alarm aer 9 minutes.

Note! The alarm works even when the phone

is switched o. Do not power on if wireless

phone use is prohibited or when it may cause

interference or danger.

Torch

Slide up to turn on the torch. Slide down

to turn o.



1. Press Menu â  â .

2. Select  to reset the phone

sengs. All the changes that you have

made to the phone sengs will be reset to

default sengs.

3. Enter the phone code and press OK to reset.

Tip: The default phone code is 1234.



1. Press Menu â  â .

2. Select  to delete phone sengs

and content such as contacts,number lists

and messages (SIM memory is not aected).

3. Enter the phone code and press OK to reset.

Tip: The default phone code is 1234.

www.doro.com



Hereby, Doro declares that the radio equipment type

 is in compliance with Direcves:

2014/53/EU and 2011/65/EU. The full text of the EU

declaraon of conformity is available at the following internet

address: www.doro.com/dofc





Hereby, Doro declares the external power supply for this device

is in compliance with Commission Regulaon (EU) 2019/1782

regarding ecodesign requirements for external power supplies

pursuant to Direcve 2009/125/EC.

The full informaon regarding the ecodesign requirements is

available at the following internet address:

www.doro.com/ecodesign

Doro 1360 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Doro 1360

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info