DECATHLON CONTROL
Cosmetic :
1) Few scratches on protection film surface
2) Protection film has no fold, no tear
3) No scratches on PMMA surface
4) No trace of glue on the edges of rubber and PMMA
5) No trace of incrusted dust on plastic casing
6) PMMA print is correct and clean (no drip, print is uniform, compliant with artwork)
Assembly :
1) Casing is correctly clipped all around (<1mm of air gap between front and rear plastic casing)
2) PMMA stickness is correct (example of 4 hours temperature 70°C test)
3) Rubber stickness is adjusted on all edges (<1mm of air gap between rubber edge and plastic
casing)
4) Rubber stickness is correct (example of 4 hours temperature 70°C test)
5) Elastic strap is correctly fixed, the plastic hook can cover a IPAD 10” when in landscape
The maximum lenght is 420mm (+/-5mm) after streching with a maximum pulling-force of 3,1Kg
ACCEPTANCE CRITERIA
This control is very subjective, trust on QPL high requirement to validate or not.
Rubber Pad is made by Double Injection, Decathlon has paid Double Injection Mold, QPL should make
sure production is using double injection.