775800
85
Verklein
Vergroot
Pagina terug
1/92
Pagina verder
85
DO7293S
www.domo-elektro.be
SK
Nabíjanie mimo dobíjaciu stanicu
Zapojte adaptér a pripojte konektor do zásuvky vo vysávači
· Symboly pri nabíjaní:
· blikajúce “1111” = prístroj sa nabíja
· svieti symbol “FULL” = prístroj je plne nabitý
· symbol “Erro” = pre nabíjanie musí byť vysávač
zapnutý. Zapnite hlavný vypínač.


Nádobku nečistôt a lter odporúčame čistiť po každom použití, a to nasledujúcim spôsobom:
16
Product Maintenance
Cleaning Side Brushes
Clean the side brush when it become dirty and replace it if its damaged. The maximum life span of
the side brush is 12 months.
Note: Before replacing side brushes, check and ensure that the L/R mark on the side brush match
with the L/R mark on the bottom base of the robot.
Cleaning Dust Bin and Filters
Empty and clean the dust bin after each usage following the steps as show in the figures below:
A. Hold the bottom of dust bin, and press down on the button using your
thumb to take out of the dust bin.
B. Take out dust bin.
C. After press down button
and open dust bin upper cover
D. Open dust bin cover and take out the
primary filter and HEPA filter.
E. Empty the dust bin.
F. Wash the dust bin and primary filter under tap water,
clean the HEPA filter with brush, avoid washing it under
water.
G. Assemble primary filter and HEPA filter again into
dust bin.
16
Product Maintenance
Cleaning Side Brushes
Clean the side brush when it become dirty and replace it if its damaged. The maximum life span of
the side brush is 12 months.
Note: Before replacing side brushes, check and ensure that the L/R mark on the side brush match
with the L/R mark on the bottom base of the robot.
Cleaning Dust Bin and Filters
Empty and clean the dust bin after each usage following the steps as show in the figures below:
A. Hold the bottom of dust bin, and press down on the button using your
thumb to take out of the dust bin.
B. Take out dust bin.
C. After press down button
and open dust bin upper cover
D. Open dust bin cover and take out the
primary filter and HEPA filter.
E. Empty the dust bin.
F. Wash the dust bin and primary filter under tap water,
clean the HEPA filter with brush, avoid washing it under
water.
G. Assemble primary filter and HEPA filter again into
dust bin.
16
Product Maintenance
Cleaning Side Brushes
Clean the side brush when it become dirty and replace it if its damaged. The maximum life span of
the side brush is 12 months.
Note: Before replacing side brushes, check and ensure that the L/R mark on the side brush match
with the L/R mark on the bottom base of the robot.
Cleaning Dust Bin and Filters
Empty and clean the dust bin after each usage following the steps as show in the figures below:
A. Hold the bottom of dust bin, and press down on the button using your
thumb to take out of the dust bin.
B. Take out dust bin.
C. After press down button
and open dust bin upper cover
D. Open dust bin cover and take out the
primary filter and HEPA filter.
E. Empty the dust bin.
F. Wash the dust bin and primary filter under tap water,
clean the HEPA filter with brush, avoid washing it under
water.
G. Assemble primary filter and HEPA filter again into
dust bin.
16
Product Maintenance
Cleaning Side Brushes
Clean the side brush when it become dirty and replace it if its damaged. The maximum life span of
the side brush is 12 months.
Note: Before replacing side brushes, check and ensure that the L/R mark on the side brush match
with the L/R mark on the bottom base of the robot.
Cleaning Dust Bin and Filters
Empty and clean the dust bin after each usage following the steps as show in the figures below:
A. Hold the bottom of dust bin, and press down on the button using your
thumb to take out of the dust bin.
B. Take out dust bin.
C. After press down button
and open dust bin upper cover
D. Open dust bin cover and take out the
primary filter and HEPA filter.
E. Empty the dust bin.
F. Wash the dust bin and primary filter under tap water,
clean the HEPA filter with brush, avoid washing it under
water.
G. Assemble primary filter and HEPA filter again into
dust bin.
16
Product Maintenance
Cleaning Side Brushes
Clean the side brush when it become dirty and replace it if its damaged. The maximum life span of
the side brush is 12 months.
Note: Before replacing side brushes, check and ensure that the L/R mark on the side brush match
with the L/R mark on the bottom base of the robot.
Cleaning Dust Bin and Filters
Empty and clean the dust bin after each usage following the steps as show in the figures below:
A. Hold the bottom of dust bin, and press down on the button using your
thumb to take out of the dust bin.
B. Take out dust bin.
C. After press down button
and open dust bin upper cover
D. Open dust bin cover and take out the
primary filter and HEPA filter.
E. Empty the dust bin.
F. Wash the dust bin and primary filter under tap water,
clean the HEPA filter with brush, avoid washing it under
water.
G. Assemble primary filter and HEPA filter again into
dust bin.
16
Product Maintenance
Cleaning Side Brushes
Clean the side brush when it become dirty and replace it if its damaged. The maximum life span of
the side brush is 12 months.
Note: Before replacing side brushes, check and ensure that the L/R mark on the side brush match
with the L/R mark on the bottom base of the robot.
Cleaning Dust Bin and Filters
Empty and clean the dust bin after each usage following the steps as show in the figures below:
A. Hold the bottom of dust bin, and press down on the button using your
thumb to take out of the dust bin.
B. Take out dust bin.
C. After press down button
and open dust bin upper cover
D. Open dust bin cover and take out the
primary filter and HEPA filter.
E. Empty the dust bin.
F. Wash the dust bin and primary filter under tap water,
clean the HEPA filter with brush, avoid washing it under
water.
G. Assemble primary filter and HEPA filter again into
dust bin.
12
34
56
1. Stlačte tlačidlo otvorenia (uvoľnenie) nádoby nečistôt a vyberte ju z vysávača.
2. Otvorte a vyberte lter HEPA (vrátane držiaku).
3. Z nádobky vysypte všetky nečistoty - najlepšie je vysypávať rovno nad smetiaku alebo košom.
4. Následne nádobu a držiak ltra opláchnite pod tečúcou vodou. Nechajte ich uschnúť a potom vložte
späť na svoje miesto. Medzitým vyčistite lter HEPA (vyklepte alebo vyčistite pomocou kefy na
prach)
5. Ak je HEPA lter značne znečistený, môžete ho po cca 30 dňoch používania tiež vyčistiť a premyť
pod tečúcou vodou. Pred vložením späť do vysávača musí byť absolútne suchý.
· Akonáhle je HEPA lter veľa znečistený alebo viditeľne poškodený, tak ho musíte vymeniť za
nový. Maximálna životnosť ltra je približne 6 mesiacov.
· Vymeňte lter HEPA a držiak v nádobe. K tomu najprv otočte kryt na stranu.
6. Pri výmene ltra s držiakom musíte najskôr otvoriť veko nádoby (pootočenie na stranu).
10
Product Operation
Battery Charging
1. Charging Station Placement
A. Place charging station against the wall,
and remove obstacles about 1m on either
sides and 2m in front of the station. Please
remove obstacles as show in the right figure.
B. If robot is power off, switch on the robot first before charging.
2. Charge the robot in either way as shown below:
A. Plug one end of the adapter into the robot and the other end into the power socket as shown
in Fig a.
B. Press the “HOME button on the remote control or robot to operate the robot looking for the
charging docking automatically as shown in Fig b.
Fig a Fig b
Note:
a. When robot is in charging, the LED panel will gradually show “1111 from left to right.
b. When charging is over, the LED panel will show “FULL”.
c. In standby status, the robot will when the battery level is low.
d. In working status, the robot will look for the charging dock automatically when the battery
level is low.
In Order to Extend Battery’s Life
a. Please charge the robot for up to 5 hours during the first charging.
b. Charge the robot as soon as possible when battery capacity is low.
c. The robot will return to the charging dock automatically when cleaning is finished or battery
capacity is low.
d. When you do not use the robot for some time, please fully charge the battery first, then
switch off the robot and keep it in a cool but dry place.
e. If the robot has been put aside over 3 months, please charge the robot for 5 hours first
before using it for cleaning.
show
85

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Domo DO7293S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Domo DO7293S in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 9.27 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info