507649
20
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
20
Electrode gap
The electrode gap must be 0.5 mm.
Checking the ignition spark
- Press the loosened spark plug with the ignition cable Þ rmly
connected against the cylinder using insulated pliers (not
near the spark plug opening).
- ON/OFF switch in the "I" (ON) position.
- Pull the starter cable hard.
If the function is correct, an ignition spark must be visible near
the electrodes.
CAUTION:
Do not touch the spark plug or plug cap if the engine is
running (high voltage).
Switch off the engine before starting any maintenance work.
A hot engine can cause burns. Wear protective gloves!
The spark plug must be replaced in case of damage to the
insulator, electrode erosion (burn) or if the electrodes are very
dirty or oily.
- Remove the Þ lter cover (see "Cleaning the air Þ lter").
- Pull the plug cap (G/1) off the spark plug. Use only the
combination wrench supplied with the saw to remove the
spark plug.
CAUTION: Use only the following spark plugs:
BOSCH WSR 6F or NGK BPMR 7A.
Replacing the spark plug
Cleaning the air Þ lter
F
G
1
- Remove the Þ lter cover (E/1) (2 screws).
- Loosen the screws on the air Þ lter (E/2) and remove from
intake manifold.
- Loosen the screw on the preÞ lter cover (E/3) and remove.
- Remove preÞ lter (E/4).
IMPORTANT:
Cover the intake opening with a clean cloth to prevent dirt
particles from getting into the carburetor.
- Pry apart the top and bottom of the air Þ lter as shown in
Figure F.
CAUTION:
To prevent injury to the eyes, do NOT blow out dirt particles!
Do not use fuel to clean the air Þ lter and preÞ lter.
E
2
4
1
3
- Clean the air Þ lter and preÞ lter with a soft brush.
- If the Þ lter is very dirty, clean it in lukewarm water with dish-
washing detergent.
- Let the air Þ lter dry completely.
- Put the top and bottom sections back together.
- Before reinstalling the air Þ lter, check the intake opening and
remove any dirt particles. If there are any, remove them with
a brush.
Clean frequently (several times a day) when working in very
dusty or dirty conditions. Full engine power is possible only with
a clean air Þ lter and preÞ lter!
Important: For sawing dry wood and working on dusty ground
we recommend using a Robkoß ok air Þ lter (available as an
accessory). The Robkoß ok Þ lter keeps out even the smallest
dust particles.
CAUTION: If the air Þ lter or preÞ lter becomes damaged,
replace immediately!
Pieces of cloth or large dirt particles can destroy the en-
gine!
H
0,5 mm
20

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Dolmar-115

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Dolmar 115 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Dolmar 115 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Dolmar 115

Dolmar 115 Gebruiksaanwijzing - Deutsch - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info