652861
8
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
8
3.8.6
3.8.7
3.8.8
3.8.9
3.9.0
3.9.1
3.8.1
3.8.2
3.8.3
3.8.4
3.8.5
For using the special programmes for different parts of the body, the DITTMANN
textile electrodes and/or the back pain relief belt, knee pain relief cuff or neck cuff
available as accessories are also ideally suited for a convenient application using
the TENS/EMS device TEN 250 (e. g. for the area H, the stimulation glove HFE
322; for the area F, the stimulation sock SFE 323; for the area E, the elbow
electrode EFE 361; for the area K, the knee electrode KFT 362 or the knee pain
relief cuff KMT 285; for the area B, the back pain relief belt RFT 363 or RGT
284 and for the area N, the neck cuff TNM 275).
When using these products together with the TENS/EMS device TEN 250, please
always follow the operating instructions of these additional products and, above
all, the respective safety instructions!
Avoid any contact with the adhesive electrodes during the therapy. Under certain
circumstances, touching the electrodes results in a short circuit involving an
excessive current density. This excessive current density might cause burns and
injuries!
Please remove the protective foil before applying the adhesive electrodes. The
adhesive strength of the electrodes depends on the condition of the skin, storage
and number of therapy sessions. If the adhesive electrodes do no longer stick
completely on the skin surface, they must be replaced by new adhesive
electrodes. The adhesive electrodes must lie completely flat against the skin in
order to avoid locally high current densities which might result in skin burns. After
the application has been completed, stick the adhesive electrodes back on the
protective foil and keep the adhesive electrodes in the polybag in such a manner
that they cannot dry out. Thus, the adhesion is ensured for longer.
Each person reacts differently to an electric nerve stimulation. If the therapy is
not successful, please seek medical advice.
The adhesive electrodes can be connected to and disconnected from the device by
means of a plug connection with an electric cable.
Avoid pulling the cables directly when removing the plug connections from the
adhesive electrodes in order to avoid damage to the cables. . Only handle the
plugs in order to connect or disconnect the adhesive electrodes!
Only connect the cables and the adhesive electrodes if the TENS/EMS device has
been switched off.
Before using the adhesive electrodes, the areas of the skin where the adhesive
electrodes will be put on must be thoroughly cleaned and dried. The areas of the
skin should be greaseless and clean.
Using the TENS/EMS device may result in skin irritations under certain
circumstances. If skin irritations, e.g. redness, blisters or itching, occur, the
TENS/EMS device should no longer be used! Do not use the adhesive electrodes
permanently on the same part of the body, as this can lead to skin irritations.
If you wish to reposition the adhesive electrodes of the TENS/EMS device during
the therapy, make sure that you switch off the device first.
The adhesive electrodes may only be connected to the TENS/EMS device TEN 250.
Please ensure that the device is switched off when putting on or removing the
adhesive electrodes.
3.8 Usage of the TENS/EMS device
SAFETY INSTRUCTIONS
GB
8

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Dittmann-TEN-250

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Dittmann TEN 250 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Dittmann TEN 250 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Dittmann TEN 250

Dittmann TEN 250 Gebruiksaanwijzing - Deutsch - 40 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info