500142
13
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
13
4 Maintenance
GB
4 Maintenance
4.1 Overview of the filters
The filters can get dirty during use and therefore must be checked regularly:
Clean the filters as described below.
Keep the checking and cleaning intervals given below.
Replace damaged or deformed filters immediately.
Your appliance is equipped with the following 4 filters (Fig. 13):
Cyclone (Fig. 13/1)
- Checking: Every time you empty the dust container.
- Cleaning: according to the degree of soiling, but at least once per month
Zchapter 4.2, „Checking and cleaning the cyclone“
Foam plastic Motor protection filter (Fig. 13/2)
- Cleaning: according to the degree of soiling, but at least once per month
Zchapter 4.3, „Cleaning / changing the laminar motor protection filter“
- Changing: every 6 months
Zchapter 4.3, „Cleaning / changing the laminar motor protection filter“
Laminar motor protection filter (Fig. 13/3)
- Cleaning: according to the degree of soiling, but at least once per month
Zchapter 4.3, „Cleaning / changing the laminar motor protection filter“
- Changing: every 6 months
Zchapter 4.3, „Cleaning / changing the laminar motor protection filter“
Exhaust filter (Fig. 13/4)
- Cleaning: according to the degree of soiling, but at least once per month
Zchapter 4.4, „Cleaning / changing the exhaust filter“
- Changing: every 6 months
Zchapter 4.4, „Cleaning / changing the exhaust filter“
4.2 Checking and cleaning the cyclone
1. Switch off the appliance Zchapter 3.1, „Switching off“.
2. Remove and empty the dust container, Zchapter 3.4, „Emptying and cleaning the dust container“.
3. Hold the dust container low over a dustbin.
4. Check the cyclone for possible dirt.
5. If the cyclone is dirty, twist it out of its receptacle (Fig. 14/1.) and take it out (Fig. 14/2.).
6. If necessary, rinse the cyclone in clear cold or hand warm running water until all dirt is removed (Fig. 15/A).
7. Also check and if necessary clean the foam plastic motor protection filter, the laminar motor protection filter
Zchapter 4.3, „Cleaning / changing the laminar motor protection filter and the exhaust filter Zchapter 4.4,
„Cleaning / changing the exhaust filter“.
8. Refitting the cyclone into the appliance:
- The cyclone has two tabs of different size that must engage the corresponding grooves of the dust
container.
- Position the cyclone in such a way that the larger of the two tabs engages the larger groove of the dust
container (Fig. 16/1.), the smaller tab the smaller groove accordingly.
- Now lock the cyclone by twisting it in the direction indicated by the arrow (Fig. 16/2.).
9. Close the dust compartment bottom plate.
10. Put the dust container back into its holder. You must feel and hear it clicking into place.
11. Check that the dust container is fitted securely.
4
1
2
3
13
ATTENTION:
The cyclone is washable, but may not be cleaned in dishwashers. Also, do not use detergents or brushes
with hard bristles to clean the filters. Dry the cyclone with a cloth or leave it to dry at room temperature for
approx. 24 hours after cleaning (Fig. 15/B). Only put it back in place when it is completely dry.
1.1.
2.2.
14
24
19
18
17
16
15
14
20
21
22
23 13
15
2.
1.
1.
16
M2700.book Seite 13 Mittwoch, 6. April 2011 2:50 14
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Dirt Devil M2700 - Centrino SX3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Dirt Devil M2700 - Centrino SX3 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Turks als bijlage per email.

De handleiding is 1,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info