24
©
2004 Directed Electronics, Inc.
IMPORTANT! Timer Mode should be used only in open areas. Never start
and run the vehicle in an enclosed space such as a garage or carport.
To exit timer mode, turn the ignition switch on any time the
engine is running. The parking lights will flash 4 times, indicating
timer mode has been exited.
Whenever the vehicle is remote started, advanced anti-grind cir-
cuitry prevents the starter from engaging, even if the key is turned
to the start position. This prevents damage to the starter motor if
the key is turned to the start position during remote start operation.
NOTE: Anti-grind circuitry only works when the remote start system is
operating the motor and the Failsafe
®
Starter Kill relay is installed.
This feature allows your system's remote start unit to be tem-
porarily disabled to prevent the vehicle from being remote started
accidentally. This feature is useful if the vehicle is being serviced
or stored in an enclosed area. To disable the remote start, move
the shutdown toggle switch to the OFF position. The switch can be
installed in a location of your choice. Check with your installer for
recommended locations.
LOCATION OF SHUTDOWN SWITCH_________________________
Disabling the Remote Start System
Starter Anti-Grind Circuitry
