798322
45
Verklein
Vergroot
Pagina terug
1/100
Pagina verder
www.glendimplex.de 452162.66.09a · FD 0108 EN-19
LAK 3IMR - LAK 14ITR English
6.6 Starting current A 1.1 1.2 1.2 5,9 1.3
6.7 Nominal power consumption at A7/W35 /
max. consumption 5 6kW 0.65 / 4.471.17 / 8.3972.11 / 9.4173.31 / 11,69 73.39 / 12.28 7
6.8 Nominal current at A7/W35 / cos A / -- 2.8 / 0.99 5.14 / 0.99 9.27 / 0.99 14,54 / 0.99 4.94 / 0.99
6.9 Nominal power consumption A2 / W35 60.8 1.41 1.91 3.69 3.50
6.10 Power consumption of compressor protection
(per compressor) W -- -- -- -- --
6.11 Power consumption of fan W 43 124 124 248 248
7 Complies with the European safety regulations 88888
8 Additional model features
8.1 Type of defrosting Reverse circula-
tion
Reverse circula-
tion
Reverse circula-
tion
Reverse circula-
tion
Reverse circula-
tion
8.2 Condensate tray frost protection /
Water in device is protected from freezing 9No / Yes No / Yes No / Yes Yes/ Yes Yes/ Yes
8.3 Max. operating overpressure (heat source/heat sink) bar 3.0 3.0 3.0 3.0 3.0
9 Heat output / coefficients of performance (COP)
9.1 Heat output / COP5EN 14511 EN 14511 EN 14511 EN 14511
at A-15 / W35 kW / --- 10 2.3 / 2.1 3.6 / 2.3 5.2 / 2.3 10.9 / 2.4 10.6 / 2.4
kW / --- 62.3 / 2.1 3.6 / 2.3 5.2 / 2.3 10.9 / 2.4 10.8 / 2.4
at A-7 / W35 kW / --- 10 2.5 / 2.6 4.2 / 2.8 6.3 / 2.4 13.1 / 2..7 13.9 / 2.9
kW / --- 62.5 / 2.6 4.2 / 2.8 6.3 / 2.4 13.1 / 2.7 13.9 / 2.9
at A-7 / W55 kW / --- 10 2.0 / 1.7 2.9 / 1.8 4.2 / 1.7 9.0 / 1.7 11.3 / 2.1
kW / --- 62.0 / 1.7 2.9 / 1.8 4.2 / 1.7 9.0 / 1.7 11.3 / 2.1
at A2 / W35 kW / --- 10 2.6 / 3.2 4.8 / 3.4 5.3 / 3.6 10.7 / 3.3 10.5 / 3.6
kW / --- 62.6 / 3.2 4.8 / 3.4 6.2 / 3.2 12.3 / 3.3 11.0 / 3.2
at A7 / W35 kW / --- 10 3.0 / 4.6 5.6 / 4.8 5.6 / 4.8 10.2 / 4.4 10.6 / 4.1
kW / --- 63.0 / 4.6 5.6 / 4.8 9.0 / 4.3 14.6 / 4.4 14.7 / 4.3
at A7 / W45 kW / --- 10 2.8 / 3.2 5.4 / 3.4 5.4 / 3.4 9.1 / 3.8 9.8 / 3.7
kW / --- 62.8 / 3.2 5.4 / 3.4 8.3 / 3.3 14.0 / 3.5 13.9 / 3.3
at A7 / W55 kW / --- 10 2.5 / 2.6 5.1 / 2.9 5.1 / 2.9 8,7 / 2.9 8.8 / 2.9
kW / --- 62.5 / 2.6 5.1 / 2.9 6.2 / 2.6 12.9 /2.9 13.2 / 2.7
at A10 / W35 kW / --- 10 3.2 / 4.8 6.0 / 5.1 6,0 / 5.1 10.8 / 4.6 11.3 / 4.5
kW / --- 63.2 / 4.8 6.0 / 5.1 9.6 / 4.5 14.9 / 4.4 15.7 / 4.3
at A20 / W35 kW / --- 10 3.6 / 4.0 7.3 / 5.8 7.3 / 5.8 13.1 / 5.7 13.9 / 5.5
kW / --- 63.6 / 4.0 7.3 / 5.8 10.8 / 5.3 18.8 / 5.7 22.3 / 5.1
at A20/ W55 kW / --- 10 2.2 / 3.1 5.7 / 3.4 5.7 / 3.4 10.6 / 3.6 10.8 / 3.8
kW / --- 62.2 / 3.1 5.7 / 3.4 8.4 / 3.2 16.9 / 3.7 16.2 / 3.6
9.2 Cooling capacity / COP
at A27 / W7 kW / --- 62.4 / 3.8 6.5 / 3.3 6.5 / 3,3 12.4 / 3.1 12.9 / 3.0
at A27 / W18 kW / --- 63.2 / 4.6 8.7 / 4.2 8.7 / 4.2 16.4 / 3.8 17.1 / 3.7
at A35 / W7 kW / --- 62.3 / 3.0 6.2 / 2.6 6.2 / 2.6 11.8 / 2.5 12.3 / 2.5
at A35 / W18 kW / --- 63.0 / 4.0 9.0 / 3.4 9.0 / 3.4 14.0 / 3.1 15.5 / 3.3
1. The specified sound levels apply if the supporting feet (available as an option) are not used. If the supporting feet are used, the level can increase by up to 3 dB (A).
2. The specified sound pressure level corresponds to the operating noise of the heat pump in heating operation at 35°C flow temperature.
The specified sound pressure level is the free sound area level. The measured value can deviate by up to 16 dB(A) depending on the installation location.
3. Please note that additional space is required for pipe connections, operation and maintenance.
4. Factory default 6 kW
5. These data indicate the size and capacity of the system according to EN 14511. For an analysis of the economic and energy efficiency of the system, the bivalence point and
the regulation should be taken into consideration. These figures are only achieved with clean heat exchangers. Instructions for care, commissioning and operation can be found
in the relevant sections of the installation and operation instructions. The specified values have the following meaning, e.g. A7 / W35: Heat source temperature 7 °C and heating
water flow temperature 35 °C.
6. Maximum heating/cooling output
7. Max. intake incl. pipe heating and immersion heater (state of supply)
8. See CE declaration of conformity
9. The heat circulating pump and the heat pump controller must always be ready for operation.
10.COP-optimised operation
45

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Dimplex LAK 14IMR bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Dimplex LAK 14IMR in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 7.79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info