810220
28
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
27
English
USER MANUAL
6.4 Doorseal fire
The door is sealed with a ceramic strip. In case of air leakage, more soot deposits are created on the glass pane. If
you establish leakage and your fire is sealed with a ceramic strip, please consult your dealer or expert. In case of a
sealing with springy stainless steel, see the description below.
!Caution
Check the door sealing at least once a year for leakage.
!Tip
For the maintenance of the seals, please refer to the installation manual provided.
6.5 Inner lining
At the bottom and on the side walls of the fire, heat-resistant plates are placed. These plates reflect the heat, have
an insulating effect and protect the steel plate walls of the fire. If cracks are created, for instance due to extreme
heat in the fire, this is not a problem. If lining plates are falling away from each other, they should be replaced.
For assembly and disassembly, please see the appliance specific installation manual.
!Caution
Check the lining plates at least once per year for crack(s).
!Tip
Keep the old plate/plates as a reference for the dimensions of the new plate/plates.
Ø
Remove the broken plate/plates, keep an eye on their order.
Ø
Place the new plate/plates in reverse order.
!Tip
Mark the heat-resistant plates so that they can be replaced correctly (in the same location and orientation).
Always heat the appliance to capacity using suitable, dry wood. Always leave a minimum layer of ash on the
floor of the appliance. This lengthens the service life of the appliance's inner lining.
!Caution
To guarantee the operation of the fire, check whether the holes in the heat-resistant plates correspond.
6.6 Glass pane
The fire has glass panes made of heat-resistant ceramic material.
!Caution
Very small irregularities in the glass panes cannot be avoided and are within the specified quality standards.
The glass pane is attached to the door by means of profiles or lips. After the fire has been burning a few times, a
little bit of play may occur at a glass pane. Tighten the nuts or press the clips tight when you notice the glass pane
getting a little bit of play. Do not overtighten the nuts, as overtightening will cause breakage.
When a glass pane is torn or broken, you must have it replaced.
Although the fire has a pane aeration system, there may still be deposits on the pane. Regularly remove any
deposits on the glass pane, using the glass pane cleaning agent supplied, as these deposits may burn into the glass
and will be difficult to remove.
!Caution
Regularly check the glass pane for cracks/tears.
Do not use corrosive and/or abrasive cleaning agents to clean the glass pane.
!Tip
Do not overtighten the nuts that are used to fix the glass pane, as overtightening will cause breakage;
A broken ceramic pane must be disposed of with the regular domestic waste (see section 8.3).
To clean the glass pane, you may also use ceramic hob cleaner or copper cleaner.
The glass pane should absolutely not be placed in the glass container, as the ceramic material has a much higher
melting temperature than ordinary glass.
UK
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Dik Geurts Ivar 10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Dik Geurts Ivar 10 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 12.44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Dik Geurts Ivar 10

Dik Geurts Ivar 10 Installatiehandleiding - Nederlands, Deutsch, English, Français - 96 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info