Handleiding Digitalbox IMPERIAL DB 2 T basic (pagina 28 van 34) (Engels)

499304

Verklein

Vergroot

Pagina terug

1/34

Pagina verder

Installation Guide

IMPERIAL DB 2 T basic

Version 1.1

www.digitalbox.de

2Installation Guide

CAUTION:

The lightning flash with

arrowhead symbol, within

an equilateral triangle, is

intended to alert the user

to “dangerous voltage”

and to prevent from a risk

of electric shock.

Warning:

To reduce the risk of elec-

tric shock, don’t open the

cabinet. Refer servicing to

qualified personnel only.

The exclamation point

within an equilateral

triangle is intended to

alert the user to important

operating and maintenance

(servicing).

WARNING: Do not use this STB where contact with or immersion in water is

a possibility. Do not use near flower vase, washbowls, kitchen sinks, laundry tubs, swim-

ming pools, etc

WARNING: Do not put the candle or lamp stand on the cabinet; otherwise, there is the

danger of fire.

WARNING: The unit should be connected to a power supply only of the type described

in the operating instructions or as marked on the unit. If you are not sure of the type of

power supply (for example, 120 or 230 V) to your home, consult your local dealer or

local power company.

WARNING: This product install diodes. Do not open the cabinet or touch any parts in

the inner mechanism. Consult your local dealer for technical service if the opening is

required.

Note: To ensure proper use of this product, please read this User manual carefully

and retain for further reference.

Note: This product install diodes. Do not open the cabinet to avoid the unit direct

exposure to radiation.

Unit Cleaning: After the unit power is turned off, you can clean the cabinet, panel and

remote control with a soft cloth lightly moistened with a mild detergent solution.

SAFETY PRECAUTION

3 DVB-T Receiver

Attachments: Never add any attachments and/or equipment without the

manufacturer´s consent; as such additions may result in the risk of fire, electric shock,

or other personal injury.

Locating: Slots and openings in the cabinet are provided for ventilation to protect it

from overheating. Do not block these openings or allow them to be blocked by plac-

ing the STB on a bed, sofa, or other similar surface, nor should it be placed over

a radiator or heat register.

Power-Cord Protection: Place the power-supply cord out of the way, where it will

not be walked on. Please take special attentions to cords at plugs, convenience

receptacles, and the point where they exit from the unit.

Object and Liquid Entry: Never put objects of any kind into this STB through openings,

as they may touch dangerous voltage points or short-out parts that could result in

a fire or electric shock. Never spill any liquid on the STB.

Note: Moisture may be formed on the lens In the following conditions:

when the unit is suddenly moved from a cold environment or an air-condition

room to a warm place.

immediately after a heater has been turned on.

in a steamy or very humid room.

If the moisture forms inside the unit, it may not operate properly. To correct this prob-

lem, turn on the power and wait about two hours for the moisture to evaporate.

Parts Replacement: When the unit parts need to be replaced, user should make sure

the service technician use the replacement parts specified by the manufacturer or hav-

ing the same characteristics as the original part. Unauthorized replacement may put

the unit In the risk of fire, electric shock or other hazards.

Safety Check: After all the maintenances and repairs are done, user is required to

request the service technician to conduct the overall safety check to ensure the

machine is In the proper condition.

SAFETY PRECAUTION

4Installation Guide

1. REMOTE CONTROL & PANEL DESCRIPTION .................................................... 6

1.1 Front Panel Description .............................................................................................................. 6

1.2 Rear Panel Description ............................................................................................................... 7

1.3 Remote Control Description ..................................................................................................... 8

2. HOTKEY ............................................................................................................................. 9

2.1 Power .................................................................................................................................................. 9

2.2 TXT ........................................................................................................................................................ 9

2.3 Mute ..................................................................................................................................................... 9

2.4 Number .............................................................................................................................................. 9

2.5 M/P (Multi-Pictures) .................................................................................................................... 9

2.6 CH+/CH- ........................................................................................................................................ 10

2.7 Vol+/Vol- ........................................................................................................................................ 10

2.8 TV/RADIO ...................................................................................................................................... 10

2.9 Exit ...................................................................................................................................................... 10

2.10 Menü ................................................................................................................................................. 10

2.11 Back .................................................................................................................................................. 10

2.12 Channel List ................................................................................................................................... 11

2.13 Audio ................................................................................................................................................. 11

2.14 Information ..................................................................................................................................... 11

2.15 EPG .................................................................................................................................................... 11

2.16 Sub ..................................................................................................................................................... 12

2.17 Zoom ................................................................................................................................................. 12

2.18 List ..................................................................................................................................................... 12

2.19 PGUP/PGDN ................................................................................................................................ 13

2.20 FAV .................................................................................................................................................... 13

2.21 FAV+/FAV- .................................................................................................................................... 13

3. WELCOME PAGE ........................................................................................................ 14

4. CHANNEL ...................................................................................................................... 15

4.1 TV Channel List ............................................................................................................................ 15

4.1.1 Favorite ................................................................................................................................ 16

4.1.2 Move .................................................................................................................................... 16

4.1.3 Find ....................................................................................................................................... 17

4.1.4 Sort ....................................................................................................................................... 17

4.1.5 Edit ........................................................................................................................................ 18

4.1.5.1 Delete .................................................................................................................. 18

4.1.5.2 Skip ....................................................................................................................... 18

4.1.5.3 Lock ...................................................................................................................... 18

4.1.5.4 Edit ........................................................................................................................ 18

4.1.5.5 Delete All ............................................................................................................ 19

CONTENTS

5 DVB-T Receiver

4.2 Radio Channel List ...................................................................................................................... 19

4.3 Favorite group list name .......................................................................................................... 19

4.4 Delete All Favorites .................................................................................................................... 20

4.5 Delete All Channels .................................................................................................................... 20

6. INSTALLATION ............................................................................................................... 21

5.1 Auto Scan ....................................................................................................................................... 21

5.2 Channel Scan ................................................................................................................................ 21

5.3 Channel Setup .............................................................................................................................. 22

5.4 Aerial Adjustment ....................................................................................................................... 22

6. SETUP ............................................................................................................................. 23

6.1 OSD Language .............................................................................................................................. 23

6.2 TV System ...................................................................................................................................... 24

6.3 Start up Service ........................................................................................................................... 24

6.4 Region and Time ......................................................................................................................... 25

6.5 Timer Setting ................................................................................................................................ 25

6.6 OSD Setting ................................................................................................................................... 27

6.7 Parental Lock ................................................................................................................................ 28

7. TOOLS ............................................................................................................................. 29

7.1 Information ..................................................................................................................................... 29

7.2 Game ................................................................................................................................................ 29

7.3 Load Factory Default ................................................................................................................. 30

7.4 Software Upgrade ...................................................................................................................... 31

8. TECHNICAL SPECIFICATION .................................................................................. 32

9. NOTICE ........................................................................................................................... 33

CONTENTS

6Installation Guide

1. REMOTE CONTROL & PANEL DESCRIPTION

1.1 Front Panel Description

No Key Description

1 POWER Is used to switch between the working mode

and the standby mode

2 LED POWER Mode indicator (LED) – red light in operating

and standby mode

3 LED LOCK Yellow light when receiving a channel signal

4 Remote Sensor Detects the infrared signals from the remote

control unit

5 CH+/- To change channels or for navigating and changing

values in menus

2/3 4

7 DVB-T Receiver

1. REMOTE CONTROL & PANEL DESCRIPTION

1.2 Rear Panel Description

No Key Description

1 TV SCART Output SCART for the connection to a TV set

2 RS-232 Serial Port allowing software upgrades

3 ANTENNA IN Terr. input of the digital tuner

4 LOOP OUT Terr. output for cascading to others devices

5 AUDIO HiFi output for stereo set

6 VIDEO CVBS video output for TV AV in

7 AC IN Mains input cable

3 4 5

6 7

8Installation Guide

1. REMOTE CONTROL & PANEL DESCRIPTION

1.3 Remote Control Description

9 DVB-T Receiver

2.1 Power

1. Press [Power] button to switch from TV mode to Standby mode

2. In Standby mode press [Power] button again to switch back to TV mode. The last active

channel will be showed.

3. To switch off the STB complete press the main power button.

2.2 TXT

1. Press [TXT] button in TV mode to open the teletext page. This service is depending on

the support of the channel provider.

2. If the channel does not support teletext information, it will show “No Teletext Data” on

the screen.

2.3 Mute

1. Press the [Mute] button to mute the sound. On the screen an icon will be displayed to

indicate the muted sound.

2. Press the [Mute] button again to restore the sound.

2.4 Number

In TV mode you can enter the channel number directly with your remote control unit and

confirm the number with the OK button to change to the desired channel.

2.5 M/P (Multi-Pictures)

In full screen, press [0] key can enter the Mul-

ti-Pictures mode like below:

1. In Multi-Pictures mode, the screen will

display 9 channels’ preview window (static)

from the current channel. And

only the highlight preview program can play

normally.

2. HOTKEY

10Installation Guide

2. Press [ / / / ] keys can move highlight among each preview program, and only

the highlighted preview program can play normally.

3. When the highlight moves to the preview program that you want to play, you can

press [OK] key to enter the full screen play.

4. Press [Exit] key to go back to full screen.

2.6 CH+/CH-

In TV mode press [CH ] to change channel.

2.7 Vol+/Vol-

In TV mode, press [Vol ] to adjust volume.

2.8 TV/RADIO

In TV mode, press [TV/RADIO] to switch to Radio mode. In Radio mode press

[TV/RADIO] again to switch back to TV mode.

2.9 Exit

[Exit] key can exit current menu.

2.10 Menu

[Menu] key can enter the menu or exit current menu.

2.11 Back

Pressing the [Back] button allows you to toggle between the actual and the last selected

channel.

2. HOTKEY

11 DVB-T Receiver

2.12 Channel List

1. In full screen, press [OK] key can enter “Channel List”, please refer to TV Channel List

for detail information.

2. In “Channel List” menu, press [OK] key to play the highlighted channel.

2.13 Audio

1. In TV mode, press the [Audio] button to open the Audio Mode window.

2. Select the item you want to adjust with [ ] and change the value with [Vol ].

3. Press [Exit] key to exit.

2.14 Information

In TV mode, press [INFO] button can open

information screen, in the window shows the

parameters of current channel.

2.15 EPG

1. The STB has an Electronic Program

Guide (EPG) to help you navigate channels

through all the possible viewing options.

The EPG supplies information such as

channel listings and starting and ending

times for all available channels.

Press [EPG] key to display EPG screen.

2. Press [OK] key can play the current

channel in full screen.

2. HOTKEY

12Installation Guide

3. Press number key [1] can display all

programs schedule information of the

selected channel. The window is like right:

4. Press number key [2] can display the

current channel detail information. The

window is like right:

5. Press number key [2] in schedule and

detail window can open the timer window

directly. This operation can add the

highlighted program to a timer quickly.

2.16 Sub

Press [Sub] key set up subtitle on/off.

2.17 Zoom

1. The [Zoom] key allows you to magnify a

certain area on the images and the current

screen will show

2. Press [Zoom] key again, the image will

enlarge rotate as x1, x2, x4, x6, x8, x12,

x16.

3. In “x2

x16” image, using [ / / / ]

keys to move the image center area you

want to see.

4. In zoom mode, press [Exit] to close “Zoom”

window.

2.18 List

1. In TV mode, press the [List] button to stop the display. The sound of the channel will

continue.

2. Press [Pause] again to continue the display at the actual moment.

2. HOTKEY

13 DVB-T Receiver

2.19 PGUP/PGDN

In full screen, press [Page Up/Page Down] key can switch group directly.

2.20 Fav

1. In TV mode press the [Favorite] button to

display the Favorite Group window on the

screen as the picture beside shows.

2. In the Favorite Group window you can

select the desired favorite channel with

[ / ] and confirm it with [OK] to switch

to it. In bigger groups you can navigate with

[Page Up/Page Down].

3. With [ / ] you can select different

Favorite Groups.

4. Press [Exit] to close the Favorite Group

window.

2.21 Fav+/Fav-

1. In TV mode press the [FAV+/FAV-] buttons to switch between the favorite channels in

the current Favorite Group directly.

2. The sequence of the favorite channels is following the sequence in the related Favorite

Group list.

2. HOTKEY

14Installation Guide

1. When first time power on, it will show

welcome page like below. This Welcome

page is only for easy operation when first

use, user also can setting them in main

menu/Tools/Welcome Page.

2. Press [CH ] key to move highlight.

3. Press [ / ]

key to modify setup.

4. After set up the parameter, move the

highlight to “Auto Scan” and press [OK] key

to begin to scan.

Move highlight to “Main Menu” and press

[OK] key to enter to main menu.

3. WELCOME PAGE

15 DVB-T Receiver

Press [Menu] in the TV mode to enter the

main menu.

1. Press [CH ] to select the menu item

among Channel, lnstallation, Setup and

Tools.

2. Press [OK] to enter the selected item.

In the Channel menu:

1. Press [CH ] to select the wanted

menu item among TV Channel List, Radio

Channel List, Delete All Favorites and

Delete All channels Channel.

2. Press [OK] to enter the selected item.

4.1 TV Channel List

When you enter to “TV Channel List” menu,

there will display the screen like right.

1. You can move highlight by press

[CH ] key and press [OK] key to

preview the current highlighted program in

the right side preview window.

2. You can press [Page Up/Page Down] key

to implement the Page Up/Page Down

function.

3. You can use [ / ] key to switch “Group”.

4. You can press [Menu] or [Exit] keys to

enter full screen playing mode.

5. Press the number key [1]

[5] can

implement the corresponding function in

“Channel List”.

4. MENU

16Installation Guide

4.1.1 Favorite

1. Press number key [1] can open the

“Favorite” window like right.

2. You can move highlight between 8 favorite

groups by press [CH ] key and press

[OK] key to make a favorite mark in the

right side of the selected favorite group.

3. Press [OK] key again on the marked

favorite group can cancel the exist favorite

mark.

4. After marking, press [Exit] key can back to

“TV Channel List” window, there will show a

favorite mark beside the marked channel,

Press [Exit] key, the system will show up a

massage box to inquire you whether saving

or not.

4.1.2 Move

1. Press number key [2], there will show

a “moving mark” in the right side of the

selected channel like right.

2. You can move the selected channel to the

position that you want to place by press

[CH ] key. And press [OK] key to

confirm your decision.

4. MENU

17 DVB-T Receiver

4.1.3 Find

1. Press number key [3] can open the “Find”

window like right. You can press number

[0] key to [9] key to input letter or number

into the dialogue. Every time you press

number key it will change the letter or

number. For example, every time you press

number [2], it will show “a”->“b”->“c”->“a”-

>“b”->“c”->“2”->“a”->…

2. After input each character, the program

list on the left will search the channel

according your input, and list the matched

channel.

3. Press [Exit] key can close “Find” window

and you can select channel from the

channels list directly.

4.1.4 Sort

1. Press number key [4] can open the “Sort”

window like right. There are five kinds of

sorting ways. You can press [CH ] key

to move highlight and press [OK] key to

confirm you selection

2. The five kinds of sorting way are:

Default: Sorting by scanning result.

Name (A-Z): Sorting in Alphabetical A-Z

Order, ignore “$” symbol.

Name (Z-A): Sorting in Alphabetical Z-A

Order, ignore “$” symbol.

FTA: Sieved out all free fare channels.

Lock: Accumulated all locked channels and

list in the last of TV Channel List.

4. MENU

18Installation Guide

4.1.5 Edit

1. Press number key [5] will open a message

box for you to enter password, and the

default password is “0000”.

2. There are five items of “Edit Channel”:

Delete, Skip, Lock, Edit, and Delete all.

3. Press [Exit] can exit “Edit Channel” menu.

4. If you carried our 1-5 function of “Edit

Channel “ menu, the system will show up a

message box to inquire you whether saving

or not.

4.1.5.1 Delete

In “Edit Channel” menu, press number key [1] can make a delete mark in the right side of

the highlighted channel. After save and exit “Edit Channel” menu, the marked channel will

be deleted.

4.1.5.2 Skip

In “Edit Channel” menu, press number key [2] can make a “skip mark” in the right side of

the highlighted channel. After save and exit “Edit Channel” menu, the channel will be skip

while user change channel in the full screen.

4.1.5.3 Lock

In “Edit Channel” menu, press number key [3] can make a “lock mark” in the right side of

the highlighted channel. After save and exit “Edit Channel” menu, STB will request you to

input the password while you want to watch the locked channel.

4.1.5.4 Edit

In “Edit Channel” menu, press number key

[4] can enter edit box like right:

1. On the “Name” item, press [OK] key can

display keypad to edit the name of selected

channel.

2. “Video PID”, “Audio PID” and “PCR PID”

items are grey and can not be edited.

3. After modification, move highlight to

“Save” item and press [OK] key can save

the modified value and exit “Edit” mode.

Otherwise, move highlight to [Exit] item

and press [OK] key can exit “Edit” mode

and won’t save any modification.

4. MENU

19 DVB-T Receiver

4.1.5.5 Delete all

1. In “Edit Channel” menu, press number key

[5] can mark all the channel with delete

mark

2. Press number key [5] again can cancel all

the delete mark.

4.2 Radio Channel List

Basically, the operation of “Radio Channel

List” is same as “TV Channel List”, but there

is one point different: In “Radio Channel List”

mode, there is no video information, so it will

always display Radio’s logo in the right side

preview window.

4.3 Favorite group list name

When you enter “Favorite group list name”

menu with 8 favorite group will be

displayed, press [OK] on the RCU to rename

favorite group. Use [CH [ / ] / [Vol / ]

to select character, press [OK] to confirm it.

After modification select “OK” of button bar

and press [OK] on the RCU to rename the fa-

vorite group name and leave the edit mode.

Press [Exit] on the RCU to exit the edit mode

without saving the favorite group name.

4. MENU

20Installation Guide

4.4 Delete All Favorites

In “Delete All” item:

1. There will display an dialogue for user to

key in password. The default Password is

“0000”.

2. When you input the correct password,

there will show up a warning message box

to inquire you whether delete all or not.

3. If you select “Yes”, all favorite channels will

be deleted.

4. In step 1 and step 2, press [Exit] key can

exit the function directly without save.

4.5 Delete All Channels

In “Delete All” item:

1. There will display an dialogue for user to key in password. The default Password is

“0000”.

2. When you input the correct password, there will show up a warning message box to

inquire you whether delete all or not.

3. If you select “Yes”, all channels will be deleted.

4. In step 1 and step 2, press [Exit] key can exit the function directly without save.

? Frequently Asked Question

Q: IF I incautiously delete all channels, what should I do?

A: there are two ways to restore:

To auto scan all channels in “Installation” function.

To channel scan in “Installation” function.

4. MENU

21 DVB-T Receiver

When you enter to “Installation” menu, there

will display the screen like right:

In “Installation” menu;

1. Press [CH ] key to select menu pages

among Auto Scan, Channel Scan, Channel

Setup and Aerial Adjustment.

2. Press [CH ] key to select menu items

among each items.

3. Press [OK] key to enter the selected item.

5.1 Auto Scan

When you enter to “Auto Scan” menu, there

will display the screen like right:

1. Firstly please select the country in System

Setup Menu / Region and Time / Region

2. In “Scan Mode” item, press [ / ] key to

select scans all channels or just scans free

channels.

3. Moving the highlight to “Search” item and

press [OK] key to start scanning.

4. In the “Auto Scan” menu, press [Exit] key to

draw back from the scanning.

5.2 Channel Scan

When you enter to “Channel Scan” menu,

there will display the screen like right:

1. There is two mode. You can scan channel

by channel or by frequency”.

2. When scan band is UHF, the range of Ch

No. is from 21 to 69. When scan band is

VHF, the range of Ch No. is from 5 to 13.

3. When you complete your modification,

move highlight to “Search” item and press

[OK] key, then it will begin to scan.

4. In the “Channel Scan” item, press [Exit] key

to exit the scanning and save the current

parameters.

5. INSTALLATION

22Installation Guide

5.3 Channel Setup

When you enter to “Channel Setup” menu,

there will display the screen like right:

1. You can see the channel information like

the picture displaying

2. Move the [CH ] key can move the

highlight to select the channel.

3. When press [OK] key again, you can see

the window like right:

4. Input PID information, then move highlight

to “Search” item and press [OK] key, then

it will begin to scan.

5.4 Aerial Adjustment

When you enter to “Aerial Adjustment” menu,

there will display the screen like right:

In Aerial Adjustment mode:

1. Ch No.: Press [ / ] to select the Ch No.

The range is from 5 to 69.

2. Tuner Power: On / Off

5. INSTALLATION

23 DVB-T Receiver

When you enter to “System Setup” menu, you

will see the screen like right:

In “System Setup” menu:

1. Press [CH ] key to select menu

pages among OSD Language, TV System,

Start up Service, Region and Time, Timer

Setting, OSD Setting, Parental Lock and

RCU Position.

2. Press [CH ] key to select menu items

among each items.

3. Press [OK] key to enter the selected item.

6.1 OSD Language

When you enter to “OSD Language” menu,

you will see the screen like below:

1. OSD Language: press [ / ] key to select

languages, the selections of languages

include: English, French, German, Greek,

Hungarian, Italian, Polish, Spanish, Turkish

and Dutch.

2. First Audio: Some channels have more

than one audio language for choosing; by

this function you can set the first audio for

this channel. If the playing channel has the

same audio as the “First Audio” you

set, system will play this audio language as default. If the channel hasn’t the suited

audio language, then the system will compare automatically with second audio

language. The selections of audio languages include: English, French, German,

Greek, Hungarian, Italian, Polish, Spanish, Turkish and Dutch.

3. Second Audio: If the channel has no correspond audio with “First Audio” but have cor-

responded audio with “Second Audio”, system will play the second audio language as

default. If no audio language corresponds with the “Second Audio”, then the default lan-

guage of current channel will be played automatically. The selections of audio languages

include: English, French, German, Greek, Hungarian, Italian, Polish, Spanish, Turkish and

Dutch.

4. Press [Exit] key to draw back from “OSD Language” menu.

6. SETUP

24Installation Guide

6.2 TV System

When you enter to “TV System” menu, you will

see the screen like right:

1. Display Mode is use for switching the

screen-displaying mode. Now we provide

below options: Auto / PAL-M / PAL-BG /

NTSC/ PAL-N. You can press [ / ] key to

select each mode circularly.

2. Aspect Mode is used for switching the

screen aspect ratio mode. Now we provide

below options: 4:3 PS / 4:3 LB / 16:9

/ Auto. You can press [ / ] key to select

each mode circularly.

3. Dolby Digital can select AC3 on or off.

4. Video Output is use for switching the video output mode. Now we provide below options:

CVBS, CVBS+RGB. You can press [ / ] key to select each mode circularly.

5. LCN Mode can control the channel whether sort by the sequence information in the

streams. The options is: On / Off. With [ / ] key to select each mode circularly.

6. Press [Exit] key to draw back from “TV System” menu.

6.3 Start up Service

When you enter to “Startup up Service” menu,

you will see the screen like right:

1. If the setting of “Boot on Channel” is “On”,

it means the following two items can be

work. If the setting is “Off”, it means the

“Boot on Channel” function can’t work.

2. In the “Mode” item, you can set the “Startup

Channel” as “TV” mode or “Radio” mode.

3. In “Start up Service” menu, you can press

[OK] key to open the service list, and select

the channel that you want it to startup,

press [OK] key again to confirm.

4. Press [Exit] key to draw back from “Channel

Setup” menu.

6. SETUP

25 DVB-T Receiver

6.4 Region and Time

When you enter to “Region and Time” menu,

you will see window like right:

1. Region is used for selecting the country

which you are in. You can press [ / ] key

to select each mode circularly.

2. GMT Usage: This item is use for open the

usage of GMT. You can press [ / ] keys to

switch “Off / User Define / By Region”.

3. The “GMT Offset” item is valid only when

the setting of “GMT Usage” is “Uesr

Define”. You can press [ / ] keys to

switch “GMT Offset” value, and the range

is “-11:30 ~ +12:00”, increase each half

hour progressively.

4. “Date” and “Time” items are valid only when the setting of “GMT Usage” is “Off”. You can

press [ / ] keys to moving highlight and use number keys to input directly.

5. “Summer Time” items are valid only when the setting of “GMT Usage” is “By Region”.

You can press [ / ] keys to switch.

6. Time display function can control whether the time will be displayed on screen or not.

7. Press [Exit] key to draw back from “Region and Time” menu.

6.5 Timer Setting

When you enter to “Timer Setting” menu, you

will see the window like right:

1. Program Timer:

Select “Program Timer” item and pres [OK]

key to enter “Program Timer” menu.

a) Current time information will display on the

first column; if the current time is incor-

rect, please modify the time information in

“Time” item.

b) Timer Number: You can press [ / ] keys

to set Timer number, and there are 8 tim-

ers in total.

c) Timer Mode: There are several modes for Timer to setting, include Off, Once, Daily,

Weekly, Monthly and Yearly.

d) Timer Service: There are two options for “Timer Service”, include Channel (timer setting

for channel change and Wakeup/Sleep) and Message (reminding message).

e) When you select “Channel” (timer setting for channel change and Wakeup/Sleep) op-

tion in “Timer Service”, the screen will display like right:

6. SETUP

26Installation Guide

Wakeup Channel: press [OK] key to enter

channel list and select channel that you

want to setting.

Wakeup Date: use number keys to input

your wakeup date.

Wakeup Time: use number keys to input

your wakeup time. Once the time’s up,

no matter what the system is in standby

mode or in playing mode, the system will

automatically switch to the channel you

want and start to play.

Duration: After you set a time for “Duration”

item, once the time’s up, the system will

automatically switch to standby mode.

f) When you select “Message” (reminding

message) option in “Timer Service”, the

screen will display like right:

Wakeup Message: press [ / ] key to se-

lect reminding message as Birthday, Anni-

versary and General.

Wakeup Date, you can use number key to

input your wakeup date.

Wakeup Time: use number keys to input

your wakeup time. Once the time’s up,

no matter what the system is in standby

mode or in playing mode, the system will

automatically pop a reminding message.

The message will always display on the

screen, you can press [Exit] key to close it.

g) Press [Exit] key to draw back from

“Program Timer” menu.

2. Sleep Timer

When you enter “Sleep Timer”, you will see the

window like right:

Press [ / ] key to switch the Sleep

Time parameter. The option is like below:

Off /10min /30min /60min /90min

/120min

Sleep Timer can set the system enter

standby mode automatically after the user

setting time.

Press [Exit] can exit the current menu.

6. SETUP

27 DVB-T Receiver

3. Load Default Timer Setting

When you enter “Load Default Timer Setting”,

you will see the window like right:

Press [OK] key on “Load Default Timer

Setting”, it will show “Input Password”

dialogue.

After you input the correct password, there

will show a warning message to inquiry you

“All Timers will be cleared, continue?”

If you select “Yes”, it will clear all the timer.

You can press [Exit] key to exit.

6.6 OSD Setting

When you enter to “OSD Setting” menu, you

will see a screen like right:

1. Subtitle Display: You can press [ /

] key to select “On” or “Off”. If the current

channel has subtitle information, it will be

showed up while this function is “On”. If

this function is “Off”, there won’t show up

subtitle information even if the current

channel has subtitle information.

2. OSD Timeout: When you switch channels

in full screen, there will show up some

information about current channel on the

lower of the screen. And regarding to the

duration of these information show up on

the screen, you can press [ / ] key to

switch the time. The range of the duration

is “1 second

10seconds”.

3. OSD Transparency: Besides the setting of “OSD Menu Style”, you also can set the trans-

parency of OSD. You can press [ / ] key to select the values. There are 9 levels of

transparency, 10%, 20%, 30%, 40% 50%, 60%, 70%, 80% and Off (means no trans-

parency function).

4. Load OSD Setting Default: If you are not satisfy with your setting, you can move highlight

to this item and press [OK] key to reset parameters as default value.

5. Press [Exit] key to exit the current menu.

6. SETUP

28Installation Guide

6.7 Parental Lock

You can set a password for anyone who wishes to operate in the “Installation” menu. And

you can also set the password for the lock channels. (How to set the lock channel please

refer to LOCK) Here will show you how to setting and how to revising the password.

1. In “Parental Lock” function, press [OK]

key, there will pop an dialogue for you to

input the password. The default password

is “0000”. When you input the correct

password, you will see a screen like right:

2. Menu Lock determining that when user

wish to enter “Installation” menu, whether

have to input password or not. If the setting

of “Menu Lock” is “Yes” which means user

have to key in password, set “No” means

unlock.

3. Channel Lock determining that when user wish to play the lock channels, whether have

to input the password or not. If the setting is “Yes”, play the channels with lock mark will

show up a dialogue on the screen and ask for the password. If the setting of “Channel

Lock ” is “No”, the Lock function will invalid.

4. New Password is used for revising password; you can input the new password in this

item by using number keys directly. After you filled in 4 digital numbers, the highlight

will auto skip to Confirm Password and ask you to input the new password again. If

the password is correct, the screen will show up a message of “Change password

successfully”. After finish saving and draw back to “System Setup” menu, the revising

is complete.

5. Press [Exit] key to exit the current menu.

6. SETUP

29 DVB-T Receiver

When you enter to “Tools” menu, you will see

a screen like right:

In “Tools” menu:

1. Press [ / ] key to select menu pages

among Information, Game, Load Factory

Default, Software Upgrade and Welcome

Page.

2. Press [ / ] key to select menu items

among each items.

3. Press [OK] key to enter the selected item.

7.1 Information

1. When you enter to “Information” menu,

you will see a screen like left. The screen

displays information of software version.

2. Press [Exit] key to draw back from “Tools”

menu.

7.2 Game

When you enter “Game” menu, you will see

three Games include Tetris, Snake and Oth-

ello.

Basic operation statement:

1. Tetris

Moving highlight to “Setup” and press [ / ] key to select the game level (speed).

Moving highlight to “Start” and press [OK] key to start the game.

Moving highlight to [Cancel] keys and press [OK] key to draw back from the game.

Start on the game:

 •[ / ] — Move shape left or right

 •[ ] — Rotate clockwise

 •[ ] — Faster drop

 •[OK] — Pause/Play the game

 • [Exit] — Quit game and draw back to “Tetris” menu.

7. TOOLS

30Installation Guide

2. Snake

Moving highlight to “Setup” and press [ / ] key to select the game level (speed).

Moving highlight to “Start” and press [OK] key to start the game.

Moving highlight to [Cancel] keys and press [OK] key to draw back from the game.

Start on the game:

 •[ / / / ] — use these arrow keys

to guide the snake.

 •[OK] — Pause/Play game

 •[Exit] — Quit game and draw back to “Snake” menu.

3. Othello

Moving highlight to “Setup” and press [ / ] keys to select the game level

(degree of difficulty).

Moving highlight to “Start” and press [OK] key to start the game.

Moving highlight to [Cancel] keys and press [OK] key to draw back from the game.

Start on the game:

 •[ / / / ] — use these arrow keys

to guide chessman.

 •[OK] — set chessman.

 •[Exit] — Quit game and draw back to “Othello” menu.

7.3 Load Factory Default

When you press [OK] key in the “Load Factory Default” item:

1. There will pop a dialogue for you to enter the password, and the default password is

“0000”.

2. After you input the correct password, there will show a warning message to inquiry you

“The operation will load default and erase all the channels that user added, continue?”.

3. If you select “Yes” option, the all revised parameters of the receiver will reset to default

value. Please carefully to using this function.

4. In step 1 and step 2, press [Exit] key can draw back from this item and without saving.

7. TOOLS

31 DVB-T Receiver

7.4 Software Upgrade

1. We offer the functions for user to connecting receiver (Master) to the other receiver

(Slave) via serial interface to upgrade software code and program list.

2. Connect master receiver to slave receiver via serial interface. Enter “Software Upgrade”

menu in master receiver and press [ / ] keys to switch upgrade mode.

3. Upgrade modes include: allcode / maincode / videoback / radioback / defaultdb /

userdb

4. Turn on slave receiver and it needn’t operate any setting.

5. Moving highlight to “Start” on master reeciver and press [OK] key to start upgrade.

6. Press [Exit] key to save the parameters and draw back.

7. TOOLS

32Installation Guide

VIDEO

Decoding ............................................................................. MPEG-2 & MEPG-1 compatible

Bit rate ................................................................................ Max 20Mbps

Output .................................................................................. PAL/NTSC / Auto

Aspect ratio ...................................................................... 4:3PS, 4:3LB, 16:9, Auto

Active pixel ......................................................................... 720x480 @ 30fps; 720x576 @25fps

Output connector ........................................................... RCA, TV SACRT

AUDIO

Decoding ............................................................................ MPEG-2/MPEG-1 layer I & II

Sampling rate .................................................................. 32 / 44,1 / 48

DEMODULATOR

Demodulation ................................................................... COFDM 2k, 8k

Guard ................................................................................... 1/4, 1/8, 1/16, 1/32

Input data rate ................................................................. 5-31

INPUT LEVEL

Frequency .......................................................................... VHF-UHF

Input level ........................................................................... --78dBm -20dBm

MISCELLANEOUS

Supply voltage .................................................................. 100~240 VAC 50~60Hz

Power consumption ...................................................... 1 watts max.

Operation temperature ............................................... +5° to +40°

Storage temperature ................................................... -20° to +70 °

Dimension (W x D x H) ................................................. 210 x 133 x 44 mm

Weight ................................................................................. 0,65 kg

If you still cannot resolve the issue, contact your dealer or the manufacturer.

8. TECHNICAL SPECIFICATION

33 DVB-T Receiver

9. NOTICE

34Installation Guide

DigitalBOX Europe GmbH

Sandstraße 65 - D-40878 Ratingen

Digitalbox IMPERIAL DB 2 T basic Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Digitalbox IMPERIAL DB 2 T basic

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info