482719

Digi-tech 4-LD2630 Handleiding

2
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
Manual time setting, 12/24 hour display, day of the week
language, time zone, °C/°F selection
Press and hold MODE. The 12/24 hours indicator will blink on the
display.
Press "+" or "-" to select the time format and confirm your setting
by pressing MODE.
The °C or °F indicator will now blink on the display.
Press "+" or "-" to select the temperature unit and confirm your
setting by pressing MODE.
The time zone adjustment will now blink on the display.
The time zone adjustment can be set when using the weather
station in a different time zone. Set the time zone difference to your
home time zone by pressing "+" or "-". An adjustment of -2 to +2
hours is possible.
Confirm your setting by pressing MODE.
Set the hours, minutes, year, month, day and language of the day
of the week display in the same way.
The day of the week language abbreviations are as follows:
EN=English, GE=German, SP=Spanish, FR=French, IT=italian.
Setting the alarm (2 alarm times)
Briefly press MODE. Now press and hold MODE. The hour
indicator of the first alarm time (A1) will blink on the display.
Press "+" or "-" to set the hours and confirm your setting by
pressing MODE.
Set the minutes in the same way and confirm your setting by
pressing MODE.
The hours display of the second alarm time (A2) will now blink on
the display.
Press "+" or "-" to set the hours and confirm your setting by
pressing MODE.
Set the minutes in the same way and confirm your setting by
pressing MODE.
Pressing MODE allows you to switch between A1, A2 and the
normal time display.
Activating the alarms and the snooze feature
Briefly press "+" while viewing A1 or A2 to activate or deactivate
the currently viewed alarm time.
If the alarm is activated the * symbol will appear.
The alarm will sound for 2 minutes when the set time is reached.
The alarm can be interrupted by pressing LIGHT/SNZ. The snooze
symbol Z will appear on the display. The alarm will sound again
after 5 minutes.
Press mode to deactivate snooze and the alarm sound.
Moon phase indicator
The weather station has a moon phase indicator which
automatically displays the current moon phase.
Weather forecast
The weather symbol show the weather tendency (sun, slightly
cloudy, cloudy, rain, snow) for the next hour and not the current
weather.
The weather forecast is calculated by evaluating the fluctuations in
air pressure and can deviate from actual weather changes.
Radio-Controlled Weather Station
Instruction manual
A weather forecast (weather frog), graphical air pressure of the last
12 hours, numerical air pressure
B Sunrise and sunset times, tide display (spring and neap tides),
location display, moon phase display
C Display of the current outdoor sensor (1,2 or 3), outdoor
temperature, temperature trend, outdoor humidity, humidity trend,
battery low indicator for outdoor sensor
D Indoor temperature, temperature trend, indoor humidity, humidity
trend, battery low indicator for weather station
E Date and day of the week
F Time and reception indicator, snooze symbol, 2 alarm symbols,
daylight saving time indicator
Safety notes
This electronic appliance must be protected from water and
other hazards. It is not a toy and children should not use it
unsupervised.
Set-up
Open the battery compartment at the back of the weather station.
Insert the batteries in the correct polarity and close the battery
compartment.
Remove the protective film from the weather station display.
Position the station and the sensor directly next to one another.
Insert the batteries into the sensor within the next 2 minutes.
The weather station now starts to receive the time signal and the
radio tower flashes in the display next to the time. While receiving
the signal, none of the weather station's other functions can be
used. If signal reception is successful the weather station's time
and date are set automatically.
If the reception is not successful after 7 minutes please move the
weather station to a different location at your site. Restart the
reception by pressing "+" and "-" together briefly. The weather
station will restart the reception attempt.
If the reception is not possible at all please set the time manually.
While the weather station tries to receive the time signal, it
simultaneously searches for the signal from the outside sensor and
the red light on the front of the sensor flashes.
If the transmission signal is received successfully the current
outside temperature appears on the display of the weather station.
Signal reception and exact synchronisation with the sensor can
take up to 2 hours.
Replace the batteries if the battery icon appears on the display.
Inside Hygrometer
Your weather station measures the humidity in the range of 25-
95% relative humidity.
Outside Hygrometer
Your weather station measures the humidity in the range of 25-
95% relative humidity from the outside sensor.
Cleaning instructions
Clean the product with a dry, lint-free cloth. A glasses cleaning
cloth is ideal.
Barometer
The graphical barometer display shows the air pressure during the
last 12 hours. Press and hold HISTORY to show the air pressure in
mb/hPA or in HG. Press HISTORY briefly to show the air pressure
values for the last 12 hours. After each press of the history button
the air pressure will advance one hour into the past. After hour 12
the current air pressure will be shown (hour 0).
Maximum and minimum values
The maximum and minimum values of temperature and
hygrometer are stored automatically.
Repeatedly press "+" to view the maximum and minimum values.
Press and hold "+" to reset the stored values.
Selecting your location
Press CITY- the city display will blink and the latitude and longitude
will be displayed. Press "+" or "-" to select your location. Press
CITY to confirm your selection. If the abbreviation for you city does
not appear, your location can be set manually (See "Manually
setting your location").
After a short calculation period the weather station will show the
sunrise and sunset times, the moon phase and neap tide (TIDE
LO), medium water level (TIDE MID) or spring tide (TIDE HI).
Manually setting your location
Press and hold CITY. The cities display shows "-- -- --". Press
"+" or "-" to select the first letters of your location. Press CITY to
confirm your selection. Set letters 2 and 3 of your location in the
same way.
On the display GMT appears and the time zone indicator flashes.
Set the difference of your time zone to GMT (Greenwich Mean
Time) by pressing UP and DOWN (For Germany set 1:00).
Press CITY to confirm your selection. Now set the longitude and
latitude of your location in the same way.
A table with the longitudes and latitudes for some cities can be
found at the end of these operating instructions.
After a short calculation time the weather station displays the times
for sunrise and sunset and the moon phase as well as neap tide
(TIDE LO), mean water level (TIDE MID) or spring tide (TIDE HI).
Outdoor sensor channel selection
Press "CH" on the back side of the weather station to select
channel 1, 2 or 3. If the symbol C appears, the temperature and
humidity of the 3 outdoor sensors will alternate on the display.
Press and hold "CH" to restart the outdoor temperature and
humidity reception process.
Additional information for the outside sensor
Please position your sensor in a covered location and make sure
that the sensor does not get wet and is not exposed to direct
sunlight. To guarantee optimal radio transmission, position the
station and sensor so that as few obstacles as possible (walls,
metallic components) interfere with reception.
Sources of electrical interference can also be detrimental to
reception.
Temperature and frost alarms
Setting the temperature alarm
Press "CH" to select the outdoor sensor. Press and hold "-" to set
the alarm temperature. The outdoor temperature will blink.
Press "+" or "-" to set the maximum value for the temperature
alarm. Confirm your setting by pressing MODE. Press "+" or "-" to
set the minimum value for the temperature alarm.
Confirm your setting by pressing MODE.
Activating/deactivating the temperature and frost alarms
The temperature and frost alarms can be activated or deactivated
by repeatedly pressing "-".
S
%
If both frost and temperature alarms are activated then both
symbols will appear.
If the frost alarm is activated the symbol will appear next to the
outdoor temperature. The alarm will sound at the set temperature.
If the temperature alarm is activated the symbol will appear
next to the outdoor temperature. The alarm will sound at the set
temperature.
Disposal of the electronic appliance
This electronic appliance may not be disposed of with normal
household waste. Dispose of the unit at an approved disposal
facility or at your local recycling centre. Please observe the current
rules and regulations when disposing of the appliance. Contact the
disposal system if in doubt.
Disposal of the batteries
Please dispose of your batteries properly in containers especially
set up at retailers. Batteries do not belong in household waste.
Dispose of the batteries at an approved disposal facility or at your
local recycling centre. Contact the disposal system if in doubt.
Warranty
We provide a 3-year warranty for this item. The warranty period
starts from the date of sale (receipt, proof of purchase). Within this
period we rectify all faults which are attributable to material and
manufacturing defects at no cost. For damage which is attributable
to improper treatment, e.g. dropping, knocking, or water damage,
there is no warranty claim.
digi-tech ®, Valterweg 27A, D-65817 Eppstein
Declaration of conformity
If used as intended this product conforms to the basic standards of
§ 3 and the other relevant provisions of the FTEG (Section 3 of the
R&TTE directive).
You can request the declaration of conformity here:
conformity@digi-tech-gmbh.com
Order service
You can add up to 3 outside sensors to your temperature station.
One sensor is included in the purchase.
Additional outside sensors can be ordered by fax +49(0)6198-
5770-99 or online at www.inter-quartz.de.
The price for one sensor is EUR 5.00 and for 2 sensors EUR 10.00
including operating instructions and packaging, excluding VAT and
despatch.
-2-
-4-
-5--3-
G G G
SUN SLIGHTLY CLOUDY CLOUDY RAIN SNOW
1.5V
(
AA
)
1.5V
(
AA
)
1.5V
(
AA
)
AA
AA
25 12 fr
DATE
MONTH
DAY
SUN RISE
SUN SET
MOON PHASE
CH
D
E
F
Z
z
DST
TIDE
MID
%
MAX
MAX
-1-
G
mb
HISTORY
0
2

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Digi-tech-4-LD2630

Zoeken resetten

  • De ontvangen buitentemperatuur klopt niet 35 gradenC.ipv 3 graden C
    De kamertemperatuur is wel Correct 22.4 graden C. Gesteld op 10-11-2021 om 19:46

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Digi-tech 4-LD2630 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Digi-tech 4-LD2630 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Digi-tech 4-LD2630

Digi-tech 4-LD2630 Gebruiksaanwijzing - Nederlands, Deutsch, Français, Italiano - 6 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info