739136
7
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
Robotic vacuum cleaner
Read this user manual carefully before first use.
Keep this manual for further guidance in case.
Instruction Manual
Providing one-stop household
cleaning solution
Suzhou Dibea Electrical Technology Co.,Ltd.
Official website: www.dibea.com
DT550
1
Safety Instructions ………………………………………………………………………………………… 1
Main body and Components ………………………………………………………………………… 2
Main body …………………………………………………………………………………………………… 3
Dust bin and roller brush assembly ……………………………………………………………… 4
Charging base and start button …………………………………………………………………… 5
How to charge ……………………………………………………………………………………………… 6
Quick operation …………………………………………………………………………………………… 7
Install roller brush ………………………………………………………………………………………… 8
Install mop …………………………………………………………………………………………………… 8
Install water tank assembly …………………………………………………………………………… 9
Install dust bin ……………………………………………………………………………………………… 9
Clean side brush ……………………………………………………………………………………………10
Clean dust bin and filters ………………………………………………………………………………10
Clean sensors and wheels ……………………………………………………………………………11
Clean charging poles ……………………………………………………………………………………11
Clean roller brush assembly …………………………………………………………………………11
Product specifications ……………………………………………………………………………………12
Replace battery ……………………………………………………………………………………………12
Troubleshooting ……………………………………………………………………………………………13
Safety InstructionsContents
Before using this product, please read the safety instructions and follow all
those regular safety precautions.
◆ Please read the manual carefully.
◆ Please keep the manual for further guidance in case.
Any operation that does not conform to this manual may result in damage
to this product.
Attention
1.Only authorized technicians can disassemble the product. Users are not
allowed todisassemble or repair the product.
2.Only use the original battery and power adapter of the product for charging.
Using other adapters may cause electric shock, fire or product damage.
3.Do not touch the power cord, plug or adapter with wet hands.
4.Do not use near curtains,wrapping materials,or any objects that may be
winded in the drive wheels.
5.Do not use this product near cigarette, lighter, match or any flammables.
6.If the product needs cleaning, clean it after it's fully charged.
7.Do not over-bend or put anything heavy or sharp onto the charging cord.
8.Only use the product indoors, do not use it outdoors.
9.Do not place objects more than 10kg or sit on this product.
10.Do not use this product in wet or moist environment (any environment with
liquid), e.g. bathroom or laundry.
11.Before using, collect the floor environment (remove all the fragile objects
and cords, clothing, papers, loose cables, as well as make sure to lift curtains
and drapes off the floor to avoid any possible accidents. In case that a loose
cable is tangled with the product, the cable might move around with the
product as it works and topple down the table, chairs, or cabinet and might
cause hurt or properly damage.)
12.Do not place this product where it is easy to drop off (tables, chairs, etc).
13.Turn off the power switch during product transportation or when you don't
need to use this product for a long time.
14.Before charging, check whether adapter and outlet are properly connected.
15.To avoid tripping, inform all the people in the house when this product is
working.
16.When the dust bin is full, empty it before using.( It is recommended that
clean the dust bin at least once every week )
17.Use this product in temperature from 0℃ to 40℃ .
18.Do not use this product in high-temperature environment or under direct
sunlight for a long time.
19.The battery must be removed from the product before it is scrapped.
20.Replace the battery in time according to the remote control use situation,
and the battery should be disposed of properly for safety.
21.Do not use the product on long plush rugs or dark color floors.
2 3
Product ComponentsProduct Components
No components quantity
1 main body(dust bin+water tank) 1
2 charging base 1
3 adapter 1
4 user manual 1
5 side brush 2
6 mop 2
7 Hepa filter 1
8 cleaning brush 1
9 remote control 1
Dust bin
ON/OFF Button
Top Cover
Bumper Strip
Front Bumper
Switch
Roller Brush Guard
Roller Brush
Left Big Wheel
Bottom Cover
Left Side Brush
Charging Pole
Nose Wheel
Right Side
Brush
Battery
Cover
Right Big
Wheel
Power Socket
Mop
Rolldr brush
guard
● Main body and components
Main Body
4 5
Product Components Product Components
Dust Bin
Charging Base
Start Button
Roller Brush Assembly
Dust Bin Locker
Top Cover
Bottom Cover
Power Socket
Charging Pole
Top Cover
Bottom Cover
Hepa Filter
Primary
Filter
Roller Brush
Guard
Roller Brush
Roller Brush
Container
Roller Brush
Motor
1. START button
A. Press the START button to turn on the vacuum, and press again to enter
the Auto Cleaning mode.
B. In sleeping mode, short press the START button to turn to standby mode;
then press again to start working (Auto cleaning mode); short press
START button in working mode to enter the standby mode.
C. Press STRAT button to start work when in the standby mode.
Remote Control
1. ON/OFF
2. Direction buttons
3. Cleaning mode
4. Auto charging
5. Max: robot change to powerful cleaning mode
(Only works when robot in Standby status)
6. Schedule button
Note:
A. Install two AAA type batteries into the remote control before use .
B. Remove the batteries if the remote will be left unused for a long
period.
C. If you use the remote near the charging station, the robot may not
recognize the command and may not work.
1
2
3
4
5
6
6 7
Product Operation Product Operation
How to Charge
Quick Operation
1. Charging preparation
Place the charging base against the wall
and remove obstacles about 1 meter at
two sides and about 2 meter forward.
Turn on the vacuum first before charging
if it is switched off.
2. Two ways to charge the vacuum
a. Plug the adapter into the wall socket, and connect the vacuum with the
adapter directly.
b. Charge the vacuum with the charging base.
Attention:
A. When charging, the START button flashes.
B. When fully charged, the START button turns blue.
C. When the battery power is low in standby mode, the STRAT button shows
red. The vacuum will have voice reminder , but it will not go back to
recharge by itself.
D. When the battery power is low in working mode, the START button shows
red. The vacuum will have voice reminder, and it will go back to recharge
by itself.
Methods to Extend Battery Life:
A. Charge for at least 5 hours before first use.
B. Charge the vacuum in time when the battery power is low.
C. After finishing cleaning or when the battery power is low, it will go back
to the base to recharge automatically.
D. Make sure the vacuum is fully charged and turn off the power switch
when you don’t need to use this product for a long time.
E. If the vacuum is not used for more than 3 months, please charge the
vacuum for at least 5 hours before using again
1. Before using, please place the vacuum cleaner safely on the flat ground.
2. Turn on the switch, short press START button to enter the Auto Cleaning
mode.
3. The vacuum will find the charging base automatically after cleaning. If it
finds the charging base, it will enter charging state; if not, it will be in the
standby mode.
8 9
Product Operation Product Operation
Install Roller Brush Assembly and Mop
Refer to the following steps
Install the water tank and the dust bin
Refer to the following steps
Step 2:Attach the
roller brush guard
Step 4: Open the
rubber stopper and
add in water
Step 5: Close the rubber stopper,
and wipe off the water on the
connection poles
Step 6: Attach the dust
bin to the water tank as
showed in picture
Step 7: Install the
water tank and the
dust bin in place.
Water tank
Water
pump
Dust
bin
Mop
Roller Brush
Guard
Roller Brush
Main Body
Step 1:Put the roller
brush in place first
Step 3:Attach the mop
to the bottom of the
water tank
10 11
Product Maintenance Product Operation
Clean the side brush
Clean the sensors and big wheels
1. Check if the side brush is damaged or tangled;
2. Clean the side brush with cleaning tools or mop;
3. If curling or deformation occurs, take off the side brush and put it in warm
water for a while;
4. Please replace the side brush in time if it can not be used any more.
Clean the dust bin and filters
Clean the dust bin after every use as the following steps:
Attention:
A. It is recommended to clean the filters with water after using for 15-30
days, in order to extend filters’ life;
B. Make sure the filters are totally dried before installing;
C. Both Hepa and pre-filter can be replaced;
D. Do not expose the filter to direct sunlight.
A. Press the release button to take out the dust bin and water tank.
C. Take out the dust bin.
F. Empty the dust bin.
G. Clean the dust bin and primary filter
with water; clean the Hepa filter with
the cleaning brush.
H. Re-install the primary filter and Hepa
filter in the dust bin.
D. Open the dust bin.
E. Take out the primary filter and Hepa
filter.
B. Hold the handle of the dust bin.
Clean the sensors and big wheels with cleaning
tools or soft mop cloth as showed in the picture.
Clean the charging poles
Clean the charging poles on the charging base and
main body with cleaning tools or soft mop cloth as
showed in the picture.
Clean the roller brush assembly
Remove the roller brush assembly, take out the roller brush, then clean the
roller brush and its guard by tools and soft mop cloth. (PS: the roller brush can
be washed by water.)
Clean charging poles with
dry soft mop cloth first when
having poor connection.
Attention:
Make sure the roller brush is totally dried before re-installing.
12 13
Product specifications Troubleshooting
Category item parameter
Structural
Diameter 335mm
Height 79mm
Net Weight 2.8Kg
Electronic
Voltage 14.6V
Functional
charging type
manual charging/auto
charging
charging time 4-6h
Switch button type Touching
Replace the battery
1. Remove the screws on the battery cover with a screwdriver;
2. Take out the battery;
3. Disconnect the wire between the battery and the vacuum cleaner;
4. Put the new battery in place, and make sure the label side is up;
5. Re-connect the wire correctly;
6. Install the battery cover;
7. Lock the battery cover with screws.
Attention:
Only use the original battery. Using other battery may cause
product damage.
No cause Voice prompt
1 power is cut off when charging turn on the switch
2
Power voltage is low and
charging fails
Please recharge
3 Left cliff sensor failure
Put the machine in a
safe place
4 Right cliff sensor failure
5 Front cliff sensor failure
6 Left wheel failure
7 Right wheel failure
8 Nose wheel failure
9 Left micro switch failure
Front micro switch
failure
10 Right micro switch failure
11 Front micro switch failure
12 Left wheel overload Wheel overload
13 Right wheel overload Wheel overload
14 Left side brush overload Side brush overload
15 Right side brush overload Side brush overload
16 Fan overload
17 Roller brush overload Roller brush overload
18 In charging In charging
19 Charging completed Charging completed
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Dibea DT550 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Dibea DT550 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info