598714
12
Verklein
Vergroot
Pagina terug
1/41
Pagina verder
MicroLink
®
ADSL Modem Router
© 2005 devolo AG, Aachen (Germany)
While the information in this manual has been compiled with great care, it may not be deemed an assurance
of product characteristics. devolo AG shall be liable only to the degree specified in the terms of sale and
delivery.
The reproduction and distribution of the documentation and software supplied with this product and the use
of its contents is subject to written authorization from devolo AG. We reserve the right to make any alter-
ations that arise as the result of technical development.
You can find all declarations and certifications of compliance for the products, as long as they were available
at the time of publication, in the appendix of this documentation.
Trademarks
Windows
®
and Microsoft
®
are registered trademarks of Microsoft, Corp.
Mac
®
is a registered trademark of Apple Computer, Inc.
Linux
®
is a registered trademark of Linus Torvalds.
MicroLink
®
is a registered trademark of devolo AG.
devolo and the devolo logo are registered trademarks of devolo AG. All other names mentioned may be
trademarks or registered trademarks of their respective owners.
Subject to change without notice. No liability for technical errors or omissions.
Aachen, September 2005
41551/0905
devolo AG
Sonnenweg 11
52070 Aachen
Germany
www.devolo.com
|
Preface
|
devolo MicroLink ADSL Modem Router
|
EN
Preface
Thank you for placing your trust in this devolo product.
With the MicroLink ADSL Modem Router, you have purchased an ADSL router
that combines the functions and advantages of an ADSL modem, a switch
(hub) and a router in a single device. This combination makes it the optimal,
user-friendly network and Internet access solution for small-office and home-
office (SOHO) environments.
The router's ADSL modem provides satisfyingly fast Internet access:
Download speeds of up to 8 Mbps make transferring video material,
graphics and other high-volume data a pleasure.
With upload speeds of up to 1 Mbps, you can easily send large e-mail
attachments quickly and at low cost.
It also serves as an optimal combination of Internet-access router and
network switch:
The router simplifies the installation of Internet access significantly,
as no special drivers are required for the connected individual com
-
puters. The access protocol has been implemented in the router
itself.
The router functionality lets multiple users access the Internet at the
same time. NAT and firewall functions protect your local network
against intruders. DHCP automates the TCP/IP configuration of the
connected computers. The router can be configured conveniently
using a Web browser.
The integrated switch is the foundation for small networks. Up to four
computers can be connected simultaneously. Each of the four ports
can also be used as an uplink port to connect additional routers,
switches or hubs.
Preface
|
|
devolo MicroLink ADSL Modem Router
|
EN
About this manual
Exacting manufacturing standards and stringent quality control are the basis
for high product standards and consistent quality to ensure your fullest sati
-
sfaction with this MicroLink ADSL Modem Router.
This documentation was compiled by several members of our staff from a
variety of departments in order to ensure you the best possible support when
using your product.
For further information, please visit 'www.devolo.com'
Our online services (www.devolo.com) are available to you around the clock
should you have any queries or require any further support.
Package contents
Please ensure that the delivery is complete before beginning with the instal-
lation of your router:
MicroLink ADSL Modem Router
AC adapter
ADSL cable
2 clips for stacking various devolo products
CD ROM with manual and software
printed manual
devolo AG reserves the right to change the package contents without prior
notice.
|
5
|
devolo MicroLink ADSL Modem Router
|
EN
Content
1 Introduction ............................................................................................6
1.1 What is ADSL?...............................................................................6
1.2 What does the MicroLink ADSL Modem Router have to offer? ...7
2 Connection and installation ................................................................8
2.1 Display and connections................................................................8
2.2 Connecting the MicroLink ADSL Modem Router ..........................9
2.3 Networking examples..................................................................11
3 Router configuration ...........................................................................12
3.1 Setting up Internet access using the setup wizard.....................12
3.2 Setting up Internet access manually...........................................13
3.3 Advanced configuration...............................................................14
3.3.1 Description of the buttons ...........................................15
3.3.2 Starting the advanced configuration ...........................15
3.3.3 Main menu ...................................................................16
3.3.4 Setup ............................................................................17
3.3.5 Status ...........................................................................25
3.3.6 Tools.............................................................................27
3.3.7 Advanced...................................................................... 30
4 Appendix ...............................................................................................37
4.1 Performance data and specifications..........................................37
4.2 Care and maintenance of the device...........................................38
4.3 CE conformity...............................................................................38
4.4 Declaration of conformity............................................................39
4.5 Warranty conditions .................................................................... 40
Introduction
|
|
devolo MicroLink ADSL Modem Router
|
6
EN
1 Introduction
1.1 What is ADSL?
The sheer speed of development of computer technology over the last few
years has resulted in a huge increase in the volume of electronic data traffic.
More users every day want to send and receive a constantly increasing
volume of data. Conventional transmission technologies (analog modems or
ISDN devices) are no longer equal to the demand.
New technologies are eliminating the restrictions and are offering the user
true broadband communications at significantly higher transfer speeds. An
important criterion for the spread of these access technologies is their avai
-
lability in as many offices and private households as possible. One of the
technologies is transfer by ADSL, which bridges the section of the network
that connects to the customer (“the last mile”) over standard copper wires.
ADSL can thus be used for broadband access to the Internet, for example.
ADSL technology (Asymmetric Digital Subscriber Line) uses three regions of
different sizes on the copper wire of a standard telephone line. Two regions
are used for data transmission and one for telephoning. The term 'Asymme
-
tric' indicates that the transmitting and receiving channels can carry different
quantities of data:
When the user surfs the Internet, the data sent to the Internet Service
Provider (ISP) tend to carry less information (e.g. addresses of web sites
or e-mails). The transmission rate of up to 1 Mbps is generally sufficient
for this purpose.
To load multimedia content (video sequences, animations, images etc.)
onto the computer from the Internet at acceptable quality and speed, a
transmission rate of up to 8 Mbps brings a significant saving in cost and
time.
|
Introduction
7
|
devolo MicroLink ADSL Modem Router
|
EN
1.2 What does the MicroLink ADSL Modem Router
have to offer?
The following is an outline of the principal features of the device giving you
a quick overview of its capabilities.
Simple installation
Connect the MicroLink ADSL Modem Router to the power outlet
Connect the MicroLink ADSL Modem Router to the computers in your
LAN
Connect the MicroLink ADSL Modem Router to the ADSL line using the
ADSL cable
Configure Internet access using the setup wizard
Done!
ADSL operation
Access the Internet and use the telephone at the same time
No new wiring, because the existing telephone lines (copper wire) can
still be used
High transmission rates of up to 8 Mbps (download) or up to 1 Mbps
(upload)
Status display
The control lamps (LEDs) at the front of your device display the router status,
and provide status regarding the function of the data transmission.
Connection and installation
|
|
devolo MicroLink ADSL Modem Router
|
8
EN
2 Connection and installation
This chapter explains the display and connections of the MicroLink ADSL
Modem Router and shows you how to set up the device and connect compu
-
ters as well as other network devices. Two network examples are illustrated
at the end of the chapter.
2.1 Display and connections
Power Power supply.
Link WAN connection; lit when a connection exists to the Internet
access device. Flashes during training.
Connect Lit when an active point-to-point connection exists.
Data Lit during data transfers.
Ports 1 ... 4 Connections for up to four computers or switches (hubs) in
LAN.
Link/Act Link = connection, Act = activity. Lit when a computer (or hub/
switch) is connected. Flashes during data transfers.
FD/Col FD = Full Duplex, Col = Collisions. Lit during full duplex opera-
tion. Flashes during data collisions.
10/100 10/100 = 10 or 100 Mbps. Lit when data transfer rate is 100
Mbps.
Button for manual reset. If this button is pressed for longer
than one second, all of the stored configuration data will be
deleted and the router will be restored to its factory defaults.
|
Connection and installation
9
|
devolo MicroLink ADSL Modem Router
|
EN
2.2 Connecting the MicroLink ADSL Modem Router
Preconditions
To work with your MicroLink ADSL Modem Router, you need at least one
network cable with RJ45 plugs (also known as a patch cable) of the type UTP-
CAT5 (Unshielded Twisted Pair, Category 5) and a computer that meets the
following preconditions:
Network-enabled operating system with a Web browser, such as Win-
dows 98, Windows Me, Windows 2000, Windows XP, Linux, MAC OS X
Ethernet port (RJ45)
RJ11 socket for ADSL cable (at least UTP CAT3, preferably
UTP CAT5) to Internet access device.
RJ45 sockets for network cables (patch cables, at least UTP
CAT5) to connect computers in the LAN or additional
switches.
Connection for AC adapter.
Power switch.
Connection and installation
|
|
devolo MicroLink ADSL Modem Router
|
10
EN
Connect the device to an AC outlet using the AC adapter. Turn on the
power with the microswitch on the back. The blue 'Power' LED on the
front panel will light up.
Connect the ADSL cable to the socket on your 'ADSL' router and to the
ADSL connection.
If necessary, connect your Internet service provider's ADSL connection device
to your telephone socket using a telephone connection cable. The 'ADSL Link'
LED will light up after several seconds.
Next, use a network cable to connect a computer to one of the router's
RJ-45 sockets (e.g. '1') and start the computer. The 'Link/Act' LED will
light up
.
It is important to always start the router before the computers so that the
computers can receive their address configuration from the router while boo-
ting.
You may also connect additional computers or switches to ports '2' to '4'
now or at a later date.
As each of the ports also functions as an uplink port, you may connect either
a computer or an additional switch (hub) to any of the 4 ports, should you
need to link more than 4 computers. Thanks to autosensing, you can use
either crossover or normal twisted-pair cables. A blue LED labeled 'Link/Act'
will be lit on the front panel for every computer or switch (hub) which is con
-
nected and powered up.
|
Connection and installation
11
|
devolo MicroLink ADSL Modem Router
|
EN
2.3 Networking examples
Networking of multiple workstations; Internet access via the MicroLink
ADSL Modem Router
Linking of two subnetworks using a switch; Internet access via the Micro-
Link ADSL Modem Router
ADSL
MicroLink ADSL Modem Router
ADSL
MicroLink ADSL Modem Router
Switch
Router configuration
|
|
devolo MicroLink ADSL Modem Router
|
12
EN
3 Router configuration
This chapter will explain how to set up Internet access and how to take
advantage of additional functions and settings of your router with advanced
configuration.
The configuration of the MicroLink ADSL Modem Router can be broken
down into the following steps:
Check and configure the DHCP parameters and a number of other settings
of the computers in the network
Set up Internet access
Configure additional router functions
We recommend using the setup wizard to configure the DHCP parameters
and set up Internet access. It will assist you with the most important settings
and make suggestions for the required configuration steps (
“Setting up Inter-
net access using the setup wizard” on page 12).
Alternatively, you may also set up Internet access using browser-based con-
figuration (“Setting up Internet access manually” on page 13).
The additional functions of the router must be set up manually using the
browser-based configuration (
“Advanced configuration” on page 14).
If you have switched the router's power off and back on, or reset the router
using the 'Factory Default' switch or settings dialogs, you must then also
restart all of the connected computers to update the TCP/IP information.
3.1 Setting up Internet access using the setup
wizard
If you are using a computer with a Windows operating system to configure
the router, you have the option of using the setup wizard.
Put the enclosed devolo product CD in your CD-ROM drive. The 'devolo
MicroLink ADSL Modem Router' setup application will start automati
-
cally.
If it does not start automatically, run the file ’autorun.exe’ in the root folder
of the product CD.
In the CD setup select 'Install MicroLink ADSL Modem Router'..
|
Router configuration
13
|
devolo MicroLink ADSL Modem Router
|
EN
The wizard will now install the selected devolo software on your com-
puter. When the installation is complete, the router configuration wizard
will automatically start. Initially, it will check your computer's DHCP set
-
tings and adjust them as necessary. Once this is complete, it will assist
you in setting up Internet access for the router.
Finally, the wizard will contact the devolo website to ensure that Internet
access is working. If the Internet connection is working correctly, config
-
ure all other connected computers. Insert the devolo product CD in the
computers to be configured and install 'MicroLink ADSL Modem Router
Installation' as a minimum. The wizard will then check the settings of the
operating system and correct them as necessary, and will skip setting up
Internet access if so requested.
3.2 Setting up Internet access manually
You will also have the option of setting up the router manually if you cannot
use the setup wizard—if you are not using Windows as your operating sys
-
tem, for example.
The computer you are using to configure the MicroLink ADSL Modem
Router must be set up to receive DHCP information automatically. For further
information, please see the documentation of your operating system.
Open your browser and enter the URL 'http://192.168.0.253'.
Enter the default username and password 'admin' and 'password'.
If you have not yet configured Internet access, a list will now be displayed
of the countries in which you can operate the MicroLink ADSL Modem
Router. Select your location from the country list and click Next
>>.
The sample provider list illustrated here is for Germany. Further provider lists
are available with providers relevant to other countries.
Router configuration
|
|
devolo MicroLink ADSL Modem Router
|
14
EN
Choose your ADSL provider from the list and confirm your choice by click-
ing Next.
If you are using an unlisted provider, select the entry ’Other provider (via T-
DSL)' and set up the connection manually.
Enter your access information (username, password) and click Next.
Keep in mind that the settings you have configured only take effect if you con-
firm them under 'Save Settings' by clicking Save. This will restart the
MicroLink ADSL Modem Router.
Finally, check whether the Internet connection works by entering a URL
such as www.devolo.com in your Web browser (e.g. Internet Explorer).
Once your Internet access is working correctly, set the remaining con
-
nected computers to automatically receive DHCP information. For further
information, please see the documentation of your operating system.
3.3 Advanced configuration
In this chapter, we will be guiding you through the advanced configuration of
the MicroLink ADSL Modem Router, explaining its functions and settings.
If you have any questions regarding the terms used here or the deployment
scenarios, please see at www.devolo.com.
|
Router configuration
15
|
devolo MicroLink ADSL Modem Router
|
EN
Please note that using the setup wizard will delete all of the settings you
have made in the advanced configuration.
3.3.1 Description of the buttons
This section provides a brief description of the buttons used in the configura-
tion interface. Individual buttons related to specific configuration menus are
covered in the descriptions of the relevant menus.
All of your changes to the configuration will be temporarily saved on the indi-
vidual configuration pages. These changes do not affect the router immedia-
tely.
This button will take you to the next configuration page.
All of the changes you have made to the configuration on this page will be
reset to their original settings. These changes do not affect the router imme-
diately.
Keep in mind that the settings you have configured only take effect if you con-
firm them under 'Save Settings' by clicking Save.
3.3.2 Starting the advanced configuration
Open your browser, enter the URL 'http://192.168.0.253', as well as the
default username and password 'admin' and 'password'.
Click 'Advanced Configuration' and Next >>.
Router configuration
|
|
devolo MicroLink ADSL Modem Router
|
16
EN
3.3.3 Main menu
Status
'Status' provides an overview of general settings.
The default language setting for the menus is based on the language version
of your web browser. In addition, the menu language (German/English) can
be toggled by clicking the corresponding flags found on the start page of the
configuration interface.
The MAC address (Media Access Control) is a serial number and unique. It is
programmed into the hardware and cannot be changed. The router has three
MAC addresses; one for the local cabled network (LAN) and one for the Inter
-
net (WAN). The MAC addresses for the LAN and WAN can be taken from the
configuration software.
|
Router configuration
17
|
devolo MicroLink ADSL Modem Router
|
EN
Save Settings
Here you can save all of the settings you have changed.
Keep in mind that the settings you have configured only take effect if you con-
firm them under 'Save Settings' by clicking Save.
3.3.4 Setup
Admin Password
Specify the password here.
Select a new password to prevent unauthorized access to the configuration
of your router. Enter it into both fields. You also enter your old password.
The password must be at least 8 characters long. Should you ever forget your
password, you will need to press the 'Factory Default' button. However, this
will also delete all of your configuration data. You will then need to set up the
router again. The factory-default administrator password is 'password'. Save
your new password by clicking Submit.
Keep in mind that the settings you have configured only take effect if you con-
firm them under 'Save Settings' by clicking Save.
Please note that changing the administrator password will disable the setup
wizard. To use the setup wizard, restore the password to its default setting,
'password'.
Router configuration
|
|
devolo MicroLink ADSL Modem Router
|
18
EN
LAN
Define the settings for the local network under 'LAN'.
'IP Address': By default the MicroLink ADSL Modem Router has the IP
address '192.168.0.253'. This address can be changed as required for
your local network.
Please note that changing the IP address will disable the setup wizard. The
setup wizard can only be used if the MicroLink ADSL Modem Router can
be reached at its default IP address of '192.186.0.253' with the subnet mask
'255.255.255.0'.
'Subnet Mask': The subnet mask is assigned with the IP address and spe-
cifies the address range. By default, the MicroLink ADSL Modem Rou-
ter has the subnet mask '255.255.255.0'. This address can be changed as
required for your local network.
'DHCP Server': Select 'Enabled' to enable the DHCP server and assign IP
addresses dynamically; select 'Disabled' to disable the DHCP server and
assign static IP and gateway addresses manually.
'DHCP address pool selection': Select 'System Allocated' to automa-
tically assign an IP address from your IP address pool; select 'User
Defined' to assign an IP address manually.
'User Defined Start Address': When working with a user-defined
DHCP address pool, enter the IP start address manually.
|
Router configuration
19
|
devolo MicroLink ADSL Modem Router
|
EN
'User Defined End Address': When working with a user-defined DHCP
address pool, enter the IP end address manually.
'DHCP Relay': If this function is enabled, the router will serve as a relay
and forward DHCP queries to the DHCP server.
'DHCP Relay Target IP': Enter the IP address of the DHCP server here
if the router is to be used as a relay.
The router can always perform only one function, i.e. either as a server or
relay.
Please note that disabling the DHCP server will disable the setup wizard. The
setup wizard can only be used if the MicroLink ADSL Modem Router is set
up as the DHCP server for the LAN.
WAN
Wide-area network settings can be defined under 'WAN'. The configuration
corresponds to your Internet access settings.
If you set up your Internet access using the setup wizard, and only plan to exe-
cute standard applications with the MicroLink ADSL Modem Router, the
entries on this screen do not need to be modified manually. Most of the fun
-
ctions listed here, which are optimally and automatically configured by the
Router configuration
|
|
devolo MicroLink ADSL Modem Router
|
20
EN
wizard, are provider-specific. For setting up your Internet access, please refer
to
“Setting up Internet access using the setup wizard” on page 12.
'PVC': A variety of PVCs can be set and configured individually under
Change Adapter.
Please note that your Internet provider must support multiple PVCs (perma-
nent virtual channels) for you to use this feature.
'VC' (Virtual Circuit): The current PVC can be enabled and disabled.
'Bridge': If this function is enabled, the selected PC can be linked to the
bridge.
'Encapsulation': Protocol selection list containing the usual provider pro-
tocols.
'ATM' is a connection-oriented data communications process.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Devolo MicroLink ADSL Modem Router bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Devolo MicroLink ADSL Modem Router in de taal/talen: Engels als bijlage per email.

De handleiding is 0,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Devolo MicroLink ADSL Modem Router

Devolo MicroLink ADSL Modem Router Gebruiksaanwijzing - Deutsch - 42 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info