Note that the data on your pannier rack or in the man-
ufacturer's user manual may be dierent.
Maximum weight loading of ont pannier rack:
•Loading area above wheel: 10kg
•Low loading area: 18kg
Maximum weight loading of rear pannier rack:
•20" child's bike and trailer: 10kg
•24" child's bike: 18kg
•Touring bike, city bike, trekking bike, ATB: 25kg
30.3 Tightening torques for screw
connections
Only use a suitable tool, a torque wrench for example,
to tighten the screw connections as otherwise the
screws could shear o or break.
If you tighten screws too tightly, this could damage
the components
You should therefore always observe the prescribed
tightening torque.
Observe the minimum screw-in depth. For hard aluminium
alloys this is at least 1.4 times the screw diameter (e.g.
nominal diameter M 5 × 1.4 = 7mm).
Whenever possible, you should tighten all safety-relevant
screw connections using a torque wrench. This indicates
the tightening torque in Nm (Newton metres) in each case.
If no values are indicated on the component, use
the tightening torques in the following table.
If the torque has been specied by the manufac-
turer of the component, this has priority.
Carbon parts must be mounted using a special
mounting paste.
Also note other information or markings on carbon
components regarding the recommended torques.
