163896
8
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
E7
Reset
Reset button is placed on the housing.
The reset button is to be activated for the following reason:
- Initial installation of the unit when all wiring is completed.
- All the function button does not operate.
- Error symbol on the display.
LISTENING TO RADIO
Band button (BAND)
Each band is toggled cyclically by pressing this key FM1---FM2---FM3.
Automatic or Manual tuning (FREQ UP OR FREQ DOWN )
When pressed short, these keys are operated as SEEK tuning mode.
When pressed longer than 1 sec., they are operated as MANUAL tuning mode.
Note: The unit automatically switches back to SEEK tuning mode after 5 sec. if no input was detected
during MANUAL tuning mode.
Auto seek/Preset scan (A/PS)
Preset Scan (PS) - By pressing shortly, the radio plays each preset station for 5 seconds.
Auto Seek (AS) - By pressing longer than 1 sec, auto seek is activated. The 6 strongest stations are
preset and stored in the corresponding preset number. When Auto Seek operation is finished, the radio
executes the preset scan.
Note: This feature is called AMS on the remote control.
Scan automatic tuning control (SCN)
This key is operated as RADIO SCAN. The operation is similar as normal search but different thing is
holding 5 seconds on every station detected.
Storing and recalling broadcast frequencies
If you press any of the NUMBER (1-6) you can easily store up to six broadcast frequencies for later
recall with the touch of a button.
1. Choose a desired BAND (FM1-FM2-FM3).
2. When you find a frequency that you want to store in memory, press a NUMBER (1-6) and hold until
the preset number shows and lit in the display.
3. The number you have pressed will remain lit. The selected radio station frequency has been stored
in memory. The next time you press the same NUMBER (1-6) the radio station frequency is recalled
from memory.
Note: Up to 18 FM stations can be stored in the memory.
Stereo/Mono
Head Unit: Press and hold AF button to switch between stereo or mono sound.
Remote Control: Press ST button
USING THE RDS FUNCTION
What is RDS?
The RDS (Radio Data System) is a digital information system developed by the EBU (European
Broadcast Union). Piggy-backed on normal FM broadcasts, RDS offers a variety of information services
and automatic retuning functions for RDS-compatible car stereos.
In 1988, RDS became available in the United Kingdom, France, West Germany, Ireland and Sweden.
Test transmissions are being conducted in many other european countries. It is expected that RDS will
be available in most western european countries in the near future.
‘AF’ function (Alternative frequencies)
When pressed short, AF switching mode is selected.
When AF switching mode is selected, the radio check the signal strength of the AF all the time.
‘TA function (Traffic announcement)
When pressed short, it is activated as TA mode on or off
When TA mode is on and traffic announcement is transmitted.
– When the unit is it CD/MP3 mode, it will switch to radiomode temporarily.
– If the volume level was under the threshold point, it will be raised to the threshold point.
– When TP station is received, TP segment is turned on in LCD display.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Denver cad-510 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Denver cad-510 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Denver cad-510

Denver cad-510 Gebruiksaanwijzing - Deutsch - 14 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info