E5
1. POWER ON/OFF (PWR)
By pressing this key, the unit is on or off.
This unit is turned on by pressing any key.
2.
FUNCTION SELECT BUTTON: BASS/TREBLE/BALANCE/FADER / TA SEEK/MASK DPI/
RETUNE/AUDIO DSP/LOUDNESS/ESP/BEEP/SEEK/STEREO/LOCAL/VOL LAST (SEL)
When pressed short, it is activated as selecting mode of electric volume.
VOL ---- BASS ---- TREB ---- BAL ---- FADER ---- VOL
TA SEEK/TA ALARM
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these
function.
TA SEEK Mode or TA ALARM mode is selected by
.
- TA SEEK mode:
When newly turned station does not receive TP information for 5 sec., the radio retunes to next
station which has not the same station (PI) as the last station, but has the TP information.
In TA seek mode, the current station can be changed to the completely different station because
the unit searches TP station when the eld strength of the current station is very weak, or the
current station has no TP signal.
- TA ALARM mode:
Any automatic retune mode is not activated, just can hear Beep sound.
MASK DPI
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these
function.
MASK DPI: masked only the AF which has different PI.
MASK ALL: masked the AF which has different PI and NO RDS signal with eld strength.
RETUNE L / S CONTROLS (2)
When press the SEL button for more than 2 seconds, it is activated as selecting Retune
mode.
RETUNE L: Select 90 seconds as the initial time of automatic TA search.
RETUNE S: Select 30 seconds as initial time.
AUDIO DSP CONTROLS
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these
function.
DSP can be selected by VOL UP and DOWN key.
POP M---ROCK M---CLASS---FLAT M---DSP OFF
LOUDNESS CONTROLS
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these
function.
LOUD ON/OFF mode is selected by
