11
Tuning to an FM station preset
In FM mode:
1. Short press the Preset button on remote control to the preset locations (1-20).
2. Short press the ▲ or ▼ button on remote control or use the Tune/Skip + or -
button on the Retro Turntable to move the preset number that you would like to
listen the radio station. Short press the Select button then your product will tune to
and play the stored station.
DAB RADIO MODE
• Check that your Retro Turntable is in DAB mode. If you are not in DAB mode,
repeatedly short press the Source button to go to DAB mode (check the display)
• The first time you use your Retro Turntable or if the station list is empty, your
Retro Turntable will automatically begin to scan for DAB radio stations. Scan and
then after a short delay the number of stations found during the scan will also be
displayed.
• If you were listening to a DAB station when you switched the Retro Turntable off,
then this station will automatically be selected when you switch the radio back on.
Wire radio aerial
Please make sure that the wire aerial on the back of the Retro Turntable is fully
extended and adjusted before you attempt to tune to a DAB radio station (a vertical
position is recommended). This will ensure that the maximum signal strength is
available when the Retro Turntable begins to scan. Extending the aerial also ensures
the best possible sound quality.
Changing DAB stations
In DAB mode:
1. Use the Tune/Skip + or - buttons to scroll through the available stations.
2. When the station that you would like to listen to is displayed, short press the
Select button. There will be a short delay while your Retro Turntable tunes to your
selected station.
Scanning for DAB stations
With DAB radio, additional stations and services regularly become available so it's a
good idea to carry out a manual scan every now and then to make sure that you have
the most up to date station listing stored within the memory of your Retro Turntable.
If you have moved your Retro turntable to another location, e.g. if you go on a holiday,
then it is also a good idea to carry out a manual scan.
