8. The appliance is not intended to utilize as a replacement for a
vehicular battery. Try not to endeavor to work a vehicle that does
not have a cell introduced.
9. The appliance can jumpstart any 12-volt vehicles, for example,
motorcycles, autos, jeeps, steamships and so forth.
10. Remember there is an auto-off component on the jump starter.
What if you don’t attempt to start your car within 30 seconds, it will
consequently close itself off.
11. Before starting your car, make sure the vehicle is in neutral with the
parking brake applied.
Jumpstarting Procedure as Below
1. Tightly interface the red clip to auto battery positive (+), black clip to
negative (-), normally the green and red indicator light of smart clamp
will flash alternately. If the connection is not correct, only red
indicator will be on and alarm sound.
2. Open the rubber lid of jump start port, connect the EC5 of clamp to
the port.
3. Start Auto: The appliance can start vehicle (up to 4.0L petrol or 2.0L
diesel motor) up to 20 times with 480A peak current.
