ENG-13
c) Press OK and DOWN switch to save the current setting, then press
MENU to return to info display.
4.1.13 Set Video Length
The following shows how to set video length to 30 Seconds, provided that the
previous value is 10 Seconds:
a) Press MENU to display the setting menu.
b) Press RIGHT and DOWN twice to Video Length.
c) Press OK switch to enter, then press DOWN to select 30s.
d) Press OK to return to info display
4.1.14 Set Video Sound
The following shows how to turn off the sound of the video:
a) Press MENU to display the setting menu.
b) Press RIGHT and DOWN three time to select Voice.
c) Press OK switch to enter and Press UP, then press OK to save
d) Press menu to return to info display.
4.1.15 Set Interval
This parameter means that how long taking picture/video will be disabled after
each trigger in ON mode. During this time the PIR of the device will works all the
time. The minimum interval is 1 seconds. The maximum interval is 30 minutes.
The default value is 1 seconds.
The following shows how to set PIR Triggering Interval Time as 5 seconds
provided that previous option is 1 second.
a) Press MENU to display the setting menu.
b) Press DOWN twice to select Interval.
c) Press OK to enter in to the interval setting.
d) Press DOWN to select 5 seconds.
e) Press OK switch to save the current setting, then press MENU to return to
info display.
4.1.16 Set Timer
This parameter defines a certain camera working time in a day. In the rest of the
time the device is shut off. The effective value of the hour ranges from 0 to 23
while the minute ranges from 0 to 59.
Provided that the camera should work from eight a.m. to five p.m., the steps are
as follows:
a) Press MENU to display the setting menu.
b) Press RIGHT twice and DOWN until to select Timer.
c) Press OK to select item, press UP or DOWN to change the value until the
start time changes to 8:00 and the stop time changes to 17:00.
d) Press OK switch to save the current setting, then press MENU to return to
info display.
4.1.17 Enter Password
If the password setting is selected as On, after switching on the camera, the LCD
screen on camera will prompt to enter password. The default password is off. It
can be changed where the steps are as following:
a) Press MENU to display the setting menu.
b) Press DOWN until to select Password.
c) Press Up to select ON, then press Right to select 4 numbers as
password.
d) Press OK to save the current setting, then press MENU to return to info
display.
e) The LCD screen will prompt to enter password next time you switch on
the camera.
