ENG 9
Chapter 7 The maintenance of the hoverboard
The hoverboard needs to be maintained. This chapter mainly describes the relevant steps and important
operation reminders to maintain it. Please make sure that the power and charge coil are off before you do the
following operation. You should not operate when the battery is charging.
7.1. Cleaning
Make sure the power and the charge coil are off.
Wipe the shell of hoverboard with soft cloth.
Make sure that water and other liquids do not enter the internal
parts of the balance scooter as this may permanently damage the
electronics/batteries of the scooter. There is a risk of personal
injury.
7.2. Storage
• If the storage temperature is below 0°C, please do not charge the hoverboard. You can place it in a warm
environment (5-30°C) for charging.
• You can cover the hoverboard, in order to prevent dust.
• Store the hoverboard indoors put it in a place with a dry and suitable environment.
• If used at lower or higher temperatures, there is a risk that the performance of the battery will be reduced
and a potential risk of damage to the product and personal injury.
• Store the product at temperatures between 5°C - 30°C. (optimum storage temperature is 25°C)
• Charge and store the product in an open, dry area and away from flammable materials (i.e. materials that
may burst into flames).
• Do not store the product in sunlight or near open fire.
• If the product is left with other persons for example during a holiday period, it should be partially charged
(20-50% charged). Not fully charged.
• When shipped from the factory, the product has often been partially charged. Keep the product in a
partially charged state, until it is going to be used.
• The hoverboard must cool down for at least 1 hour before being packed.
• Must not be left inside a warm car sitting in the sun.
'
To protect user safety, users are forbidden to open the
hoverboard, or you give up your warranty rights.
